diff options
Diffstat (limited to 'source/l')
242 files changed, 10460 insertions, 4107 deletions
diff --git a/source/l/ConsoleKit/ConsoleKit.SlackBuild b/source/l/ConsoleKit/ConsoleKit.SlackBuild new file mode 100755 index 000000000..db40f1396 --- /dev/null +++ b/source/l/ConsoleKit/ConsoleKit.SlackBuild @@ -0,0 +1,141 @@ +#!/bin/sh + +# Slackware build script for ConsoleKit + +# Copyright 2009 Robby Workman, Northport, Alabama, USA +# Copyright 2010 Eric Hameleers, Eindhoven, NL +# Copyright 2010 Patrick J. Volkerding, Sebeka, MN, USA +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +PRGNAM=ConsoleKit +VERSION=${VERSION:-20100129} +BUILD=${BUILD:-1} +NUMJOBS=${NUMJOBS:--j6} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-$PRGNAM + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "i686" ]; then + SLKCFLAGS="-O2 -march=i686 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + +rm -rf $PKG +mkdir -p $TMP $PKG +cd $TMP +rm -rf $PRGNAM-$VERSION +tar xvf $CWD/$PRGNAM-$VERSION.tar.bz2 || exit 1 +cd $PRGNAM-$VERSION || exit 1 + +# Make sure ownerships and permissions are sane: +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +## Not sure what of these we need now - no time to look yet +# Thanks to the GSB project for the patch hints :-) +# http://bugs.freedesktop.org/show_bug.cgi?id=19020 +# http://bugs.freedesktop.org/show_bug.cgi?id=20471 +#zcat $CWD/patches/consolekit-dbus-permissions.patch.gz | patch -p1 || exit 1 +# Prevent make install from erroring out on docbook validation +#zcat $CWD/patches/consolekit-skipvalidation.patch.gz | patch -p1 || exit 1 +# Clean up at_console compat files, bug #257761 +zcat $CWD/patches/consolekit-0.2.10-cleanup_console_tags.patch.gz | patch -p1 || exit 1 + +# Configure: +CFLAGS="$SLKCFLAGS" \ +CXXFLAGS="$SLKCFLAGS" \ +./autogen.sh \ + --prefix=/usr \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --sysconfdir=/etc \ + --localstatedir=/var \ + --mandir=/usr/man \ + --docdir=/usr/doc/$PRGNAM-$VERSION \ + --with-pid-file=/var/run/ConsoleKit/pid \ + --enable-docbook-docs \ + --enable-pam-module=no \ + --disable-static \ + --build=$ARCH-slackware-linux + +# Build and install: +make $NUMJOBS || make || exit 1 +make install DESTDIR=$PKG + +mkdir -p $PKG/usr/lib/ConsoleKit/run-session.d +cat $CWD/pam-foreground-compat.ck > \ + $PKG/usr/lib/ConsoleKit/run-session.d/pam-foreground-compat.ck +chmod 0755 $PKG/usr/lib/ConsoleKit/run-session.d/pam-foreground-compat.ck + +# Let's not clobber config files +mv $PKG/etc/ConsoleKit/seats.d/00-primary.seat \ + $PKG/etc/ConsoleKit/seats.d/00-primary.seat.new +mv $PKG/etc/dbus-1/system.d/ConsoleKit.conf \ + $PKG/etc/dbus-1/system.d/ConsoleKit.conf.new + +# Strip binaries: +find $PKG | xargs file | grep -e "executable" -e "shared object" \ + | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + +# Compress and link manpages, if any: +( cd $PKG/usr/man || exit 1 + find . -type f -exec gzip -9 {} \; + for i in $(find . -type l) ; do ln -s $(readlink $i).gz $i.gz ; rm $i ; done +) + +# Add a documentation directory: +mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +cp -a \ + AUTHORS COPYING ChangeLog HACKING INSTALL NEWS README TODO \ + $PKG/usr/doc/$PRGNAM-$VERSION +( + cd $PKG/usr/doc/$PRGNAM-$VERSION ; ln -s /usr/share/gtk-doc/html/polkit-1 html +) + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc +zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh + +cd $PKG +/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz + diff --git a/source/l/ConsoleKit/doinst.sh b/source/l/ConsoleKit/doinst.sh new file mode 100644 index 000000000..217d76055 --- /dev/null +++ b/source/l/ConsoleKit/doinst.sh @@ -0,0 +1,16 @@ +config() { + NEW="$1" + OLD="$(dirname $NEW)/$(basename $NEW .new)" + # If there's no config file by that name, mv it over: + if [ ! -r $OLD ]; then + mv $NEW $OLD + elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then + # toss the redundant copy + rm $NEW + fi + # Otherwise, we leave the .new copy for the admin to consider... +} + +config etc/ConsoleKit/seats.d/00-primary.seat.new +config etc/dbus-1/system.d/ConsoleKit.conf.new + diff --git a/source/l/ConsoleKit/pam-foreground-compat.ck b/source/l/ConsoleKit/pam-foreground-compat.ck new file mode 100644 index 000000000..979127272 --- /dev/null +++ b/source/l/ConsoleKit/pam-foreground-compat.ck @@ -0,0 +1,16 @@ +#!/bin/sh +TAGDIR=/var/run/console + +[ -n "${CK_SESSION_USER_UID}" ] || exit 1 + +TAGFILE="${TAGDIR}/$(getent passwd ${CK_SESSION_USER_UID} | cut -f 1 -d:)" + +if [ "$1" = "session_added" ]; then + mkdir -p "${TAGDIR}" + echo "${CK_SESSION_ID}" >> "$TAGFILE" +fi + +if [ "$1" = "session_removed" ] && [ -e "$TAGFILE" ]; then + sed -i "\%^$CK_SESSION_ID\$%d" "${TAGFILE}" + [ -s "${TAGFILE}" ] || rm -f "${TAGFILE}" +fi diff --git a/source/l/ConsoleKit/patches/consolekit-0.2.10-cleanup_console_tags.patch b/source/l/ConsoleKit/patches/consolekit-0.2.10-cleanup_console_tags.patch new file mode 100644 index 000000000..d1699d900 --- /dev/null +++ b/source/l/ConsoleKit/patches/consolekit-0.2.10-cleanup_console_tags.patch @@ -0,0 +1,65 @@ +# http://patches.ubuntu.com/by-release/extracted/ubuntu/c/consolekit/0.2.10-1ubuntu9/ +--- a/src/main.c 2008-07-25 03:19:34.000000000 +0200 ++++ b/src/main.c 2008-07-26 00:25:13.000000000 +0200 +@@ -149,6 +149,43 @@ + unlink (CONSOLE_KIT_PID_FILE); + } + ++#define CONSOLE_TAGS_DIR "/var/run/console" ++ ++static void ++delete_console_tags (void) ++{ ++ GDir *dir; ++ GError *error = NULL; ++ const gchar *name; ++ ++ g_debug ("Cleaning up %s", CONSOLE_TAGS_DIR); ++ ++ dir = g_dir_open (CONSOLE_TAGS_DIR, 0, &error); ++ if (dir == NULL) { ++ g_debug ("Couldn't open directory %s: %s", CONSOLE_TAGS_DIR, ++ error->message); ++ g_error_free (error); ++ return; ++ } ++ while ((name = g_dir_read_name (dir)) != NULL) { ++ gchar *file; ++ file = g_build_filename (CONSOLE_TAGS_DIR, name, NULL); ++ ++ g_debug ("Removing tag file: %s", file); ++ if (unlink (file) == -1) { ++ g_warning ("Couldn't delete tag file: %s", file); ++ } ++ g_free (file); ++ } ++} ++ ++static void ++cleanup (void) ++{ ++ delete_console_tags (); ++ delete_pid (); ++} ++ + /* copied from nautilus */ + static int debug_log_pipes[2]; + +@@ -229,7 +266,7 @@ + snprintf (pid, sizeof (pid), "%lu\n", (long unsigned) getpid ()); + written = write (pf, pid, strlen (pid)); + close (pf); +- g_atexit (delete_pid); ++ g_atexit (cleanup); + } else { + g_warning ("Unable to write pid file %s: %s", + CONSOLE_KIT_PID_FILE, +@@ -312,6 +349,8 @@ + + g_debug ("initializing console-kit-daemon %s", VERSION); + ++ delete_console_tags (); ++ + create_pid_file (); + + manager = ck_manager_new (); diff --git a/source/l/ConsoleKit/patches/consolekit-dbus-permissions.patch b/source/l/ConsoleKit/patches/consolekit-dbus-permissions.patch new file mode 100644 index 000000000..0cab28583 --- /dev/null +++ b/source/l/ConsoleKit/patches/consolekit-dbus-permissions.patch @@ -0,0 +1,175 @@ +diff -up ConsoleKit-0.3.0/data/ConsoleKit.conf.consolekit ConsoleKit-0.3.0/data/ConsoleKit.conf +--- ConsoleKit-0.3.0/data/ConsoleKit.conf.consolekit 2008-04-19 01:39:49.000000000 -0400 ++++ ConsoleKit-0.3.0/data/ConsoleKit.conf 2009-04-08 11:40:33.347814036 -0400 +@@ -8,88 +8,131 @@ + <allow own="org.freedesktop.ConsoleKit"/> + + <!-- Allow all methods on interfaces --> +- <allow send_interface="org.freedesktop.ConsoleKit.Manager"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Seat"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Session"/> ++ <allow send_destination="org.freedesktop.ConsoleKit"/> + </policy> + + <!-- Deny all and then allow some methods on interfaces --> + <policy context="default"> +- <deny send_interface="org.freedesktop.ConsoleKit.Manager"/> +- <deny send_interface="org.freedesktop.ConsoleKit.Seat"/> +- <deny send_interface="org.freedesktop.ConsoleKit.Session"/> ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.DBus.Introspectable"/> ++ <deny send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Manager"/> ++ <deny send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Seat"/> ++ <deny send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Session"/> + <deny send_destination="org.freedesktop.ConsoleKit" + send_interface="org.freedesktop.DBus.Properties" /> + +- <allow send_interface="org.freedesktop.ConsoleKit.Manager" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Manager" + send_member="Restart"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Manager" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Manager" + send_member="Stop"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Manager" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Manager" + send_member="OpenSession"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Manager" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Manager" + send_member="CloseSession"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Manager" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Manager" + send_member="GetSeats"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Manager" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Manager" ++ send_member="GetSessions"/> ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Manager" + send_member="GetSessionForCookie"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Manager" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Manager" + send_member="GetSessionForUnixProcess"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Manager" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Manager" + send_member="GetCurrentSession"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Manager" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Manager" + send_member="GetSessionsForUnixUser"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Manager" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Manager" + send_member="GetSessionsForUser"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Manager" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Manager" + send_member="GetSystemIdleHint"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Manager" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Manager" + send_member="GetSystemIdleSinceHint"/> + +- <allow send_interface="org.freedesktop.ConsoleKit.Seat" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Seat" + send_member="GetId"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Seat" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Seat" + send_member="GetSessions"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Seat" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Seat" + send_member="GetDevices"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Seat" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Seat" + send_member="GetActiveSession"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Seat" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Seat" + send_member="CanActivateSessions"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Seat" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Seat" + send_member="ActivateSession"/> + +- <allow send_interface="org.freedesktop.ConsoleKit.Session" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Session" + send_member="GetId"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Session" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Session" + send_member="GetSeatId"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Session" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Session" + send_member="GetLoginSessionId"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Session" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Session" + send_member="GetSessionType"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Session" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Session" + send_member="GetUser"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Session" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Session" + send_member="GetUnixUser"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Session" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Session" + send_member="GetX11Display"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Session" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Session" + send_member="GetX11DisplayDevice"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Session" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Session" + send_member="GetDisplayDevice"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Session" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Session" + send_member="GetRemoteHostName"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Session" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Session" + send_member="IsActive"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Session" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Session" + send_member="IsLocal"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Session" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Session" + send_member="GetCreationTime"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Session" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Session" + send_member="Activate"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Session" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Session" + send_member="GetIdleHint"/> +- <allow send_interface="org.freedesktop.ConsoleKit.Session" ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Session" ++ send_member="SetIdleHint"/> ++ <allow send_destination="org.freedesktop.ConsoleKit" ++ send_interface="org.freedesktop.ConsoleKit.Session" + send_member="GetIdleSinceHint"/> + </policy> + diff --git a/source/l/ConsoleKit/patches/consolekit-skipvalidation.patch b/source/l/ConsoleKit/patches/consolekit-skipvalidation.patch new file mode 100644 index 000000000..c4bf89d7a --- /dev/null +++ b/source/l/ConsoleKit/patches/consolekit-skipvalidation.patch @@ -0,0 +1,12 @@ +diff -up ConsoleKit-0.3.0/doc/dbus/Makefile.in.skipvalidation ConsoleKit-0.3.0/doc/dbus/Makefile.in +--- ConsoleKit-0.3.0/doc/dbus/Makefile.in.skipvalidation 2009-02-27 20:17:36.784329106 -0500 ++++ ConsoleKit-0.3.0/doc/dbus/Makefile.in 2009-02-27 20:18:15.701316733 -0500 +@@ -427,7 +427,7 @@ uninstall-am: uninstall-htmldocDATA + + + @DOCBOOK_DOCS_ENABLED_TRUE@ConsoleKit.html : $(SPEC_XML_FILES) +-@DOCBOOK_DOCS_ENABLED_TRUE@ $(XMLTO) xhtml-nochunks -m $(top_srcdir)/doc/dbus/config.xsl ConsoleKit.xml ++@DOCBOOK_DOCS_ENABLED_TRUE@ $(XMLTO) --skip-validation xhtml-nochunks -m $(top_srcdir)/doc/dbus/config.xsl ConsoleKit.xml + + org.freedesktop.ConsoleKit.Manager.ref.xml : $(top_srcdir)/src/org.freedesktop.ConsoleKit.Manager.xml spec-to-docbook.xsl + $(XSLTPROC) $(top_srcdir)/doc/dbus/spec-to-docbook.xsl $< | tail -n +2 > $@ diff --git a/source/l/libgtkhtml/slack-desc b/source/l/ConsoleKit/slack-desc index 22d68c5b3..63326799d 100644 --- a/source/l/libgtkhtml/slack-desc +++ b/source/l/ConsoleKit/slack-desc @@ -5,15 +5,15 @@ # make exactly 11 lines for the formatting to be correct. It's also # customary to leave one space after the ':'. - |-----handy-ruler------------------------------------------------------| -libgtkhtml: libgtkhtml (lightweight HTML engine) -libgtkhtml: -libgtkhtml: GtkHTML is a lightweight HTML rendering/printing/editing engine. It -libgtkhtml: was originally based on KHTMLW, part of the KDE project. -libgtkhtml: -libgtkhtml: libgtkhtml is used by the GIMP help browser. -libgtkhtml: -libgtkhtml: -libgtkhtml: -libgtkhtml: -libgtkhtml: + |-----handy-ruler-----------------------------------------------------| +ConsoleKit: ConsoleKit (user, login, and seat tracking framework) +ConsoleKit: +ConsoleKit: ConsoleKit is a framework for defining and tracking users, login +ConsoleKit: sessions, and seats. +ConsoleKit: +ConsoleKit: +ConsoleKit: +ConsoleKit: +ConsoleKit: +ConsoleKit: Homepage: http://freedesktop.org/wiki/Software/ConsoleKit +ConsoleKit: diff --git a/source/l/PyQt/PyQt.SlackBuild b/source/l/PyQt/PyQt.SlackBuild index 4232d5f46..7d89221a2 100755 --- a/source/l/PyQt/PyQt.SlackBuild +++ b/source/l/PyQt/PyQt.SlackBuild @@ -3,7 +3,7 @@ # Slackware build script for PyQt # Copyright 2008 Aleksandar Samardzic <asamardzic@gmail.com> -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -24,12 +24,22 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. # Modified by Robby Workman <rworkman@slackware.com> +# Modified by Eric Hameleers <alien@slackware.com> -VERSION=${VERSION:-4.4.4} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +VERSION=${VERSION:-4.7.3} +BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:--j6} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-PyQt @@ -40,14 +50,20 @@ elif [ "$ARCH" = "i686" ]; then SLKCFLAGS="-O2 -march=i686 -mtune=i686" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" +else + SLKCFLAGS="-O2" fi rm -rf $PKG mkdir -p $TMP $PKG $OUTPUT cd $TMP -rm -rf PyQt-$VERSION -tar xvf $CWD/PyQt-x11-gpl-$VERSION.tar.bz2 || exit 1 +rm -rf PyQt-x11-gpl-$VERSION +tar xvf $CWD/PyQt-x11-gpl-$VERSION.tar.?z* || exit 1 cd PyQt-x11-gpl-$VERSION || exit 1 + +# Fix phonon detection: +zcat $CWD/PyQt.phonon.diff.gz | patch -p1 --verbose || exit 1 + chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -55,10 +71,13 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; -echo "yes" | \ - python configure.py \ - CFLAGS="$SLKCFLAGS" \ - CXXFLAGS="$SLKCFLAGS" +# This avoids compiling a version number into KDE's .la files: +export QTDIR=/usr/lib${LIBDIRSUFFIX}/qt + +export CFLAGS="$SLKCFLAGS" +export CXXFLAGS="$SLKCFLAGS" + +python configure.py --confirm-license --verbose make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG || exit 1 @@ -75,5 +94,5 @@ mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -/sbin/makepkg -l y -c n $TMP/PyQt-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/PyQt-$(echo $VERSION |tr - _)-$ARCH-$BUILD.txz diff --git a/source/l/PyQt/PyQt.info b/source/l/PyQt/PyQt.info index f041f25b7..f127e6d9c 100644 --- a/source/l/PyQt/PyQt.info +++ b/source/l/PyQt/PyQt.info @@ -1,2 +1,2 @@ HOMEPAGE="http://www.riverbankcomputing.co.uk/software/pyqt/" -DOWNLOAD="http://www.riverbankcomputing.co.uk/static/Downloads/PyQt4/PyQt-x11-gpl-4.4.2.tar.gz" +DOWNLOAD="http://www.riverbankcomputing.co.uk/static/Downloads/PyQt4/PyQt-x11-gpl-4.5.4.tar.gz" diff --git a/source/l/PyQt/PyQt.phonon.diff b/source/l/PyQt/PyQt.phonon.diff new file mode 100644 index 000000000..feda65096 --- /dev/null +++ b/source/l/PyQt/PyQt.phonon.diff @@ -0,0 +1,11 @@ +--- PyQt-x11-gpl-4.6.2/configure.py.orig 2010-01-08 23:39:46.000000000 +0100 ++++ PyQt-x11-gpl-4.6.2/configure.py 2010-01-08 23:45:18.000000000 +0100 +@@ -451,7 +451,7 @@ + generate_code("QtXmlPatterns") + + if "phonon" in pyqt_modules: +- generate_code("phonon") ++ generate_code("phonon", extra_include_dirs=["/usr/include/phonon"]) + + if "QtAssistant" in pyqt_modules: + generate_code("QtAssistant") diff --git a/source/l/PyQt/slack-desc b/source/l/PyQt/slack-desc index 036065434..4e01c51ac 100644 --- a/source/l/PyQt/slack-desc +++ b/source/l/PyQt/slack-desc @@ -5,15 +5,15 @@ # make exactly 11 lines for the formatting to be correct. It's also # customary to leave one space after the ':'. - |-----handy-ruler------------------------------------------------------| + |-----handy-ruler------------------------------------------------------| PyQt: PyQt (Python bindings for Qt) PyQt: PyQt: PyQt is a set of Python bindings for Trolltech's Qt application PyQt: framework and runs on all platforms supported by Qt. PyQt: -PyQt: Homepage: http://www.riverbankcomputing.co.uk/software/PyQt/ PyQt: PyQt: PyQt: PyQt: +PyQt: Homepage: http://www.riverbankcomputing.co.uk/software/PyQt/ PyQt: diff --git a/source/l/QScintilla/QScintilla.SlackBuild b/source/l/QScintilla/QScintilla.SlackBuild index 3625a067c..e72b5ae7a 100755 --- a/source/l/QScintilla/QScintilla.SlackBuild +++ b/source/l/QScintilla/QScintilla.SlackBuild @@ -3,7 +3,7 @@ # Slackware build script for QScintilla # Copyright 2008 Robby Workman <rworkman@slackware.com> Northport, AL, USA -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -23,27 +23,38 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=${VERSION:-2.3.2} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +VERSION=${VERSION:-2.4.3} +BUILD=${BUILD:-1} CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-QScintilla +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" elif [ "$ARCH" = "i686" ]; then SLKCFLAGS="-O2 -march=i686 -mtune=i686" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" +else + SLKCFLAGS="-O2" fi rm -rf $PKG mkdir -p $TMP $PKG cd $TMP rm -rf QScintilla-gpl-$VERSION -tar xvf $CWD/QScintilla-gpl-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/QScintilla-gpl-$VERSION.tar.?z* || exit 1 cd QScintilla-gpl-$VERSION || exit 1 chown -R root:root . find . \ diff --git a/source/l/QScintilla/QScintilla.info b/source/l/QScintilla/QScintilla.info deleted file mode 100644 index f7b71c771..000000000 --- a/source/l/QScintilla/QScintilla.info +++ /dev/null @@ -1,8 +0,0 @@ -PRGNAM="QScintilla" -VERSION="2.2" -HOMEPAGE="http://www.riverbankcomputing.co.uk/software/qscintilla/" -DOWNLOAD="http://www.riverbankcomputing.co.uk/static/Downloads/QScintilla2/QScintilla-gpl-2.2.tar.gz" -MD5SUM="a6056c444494f3f849020d241f86c286" -MAINTAINER="Robby Workman" -EMAIL="rw@rlworkman.net" -APPROVED="" diff --git a/source/l/akonadi/README.html b/source/l/akonadi/README.html new file mode 100644 index 000000000..9bee704ed --- /dev/null +++ b/source/l/akonadi/README.html @@ -0,0 +1,3 @@ +downloaded from <a href="http://download.akonadi-project.org/">http://download.akonadi-project.org/</a> +<br> +<a href="http://pim.kde.org/akonadi/">akonadi Homepage</a> diff --git a/source/l/akonadi/akonadi.SlackBuild b/source/l/akonadi/akonadi.SlackBuild index 5fdd980b6..4b06c5755 100755 --- a/source/l/akonadi/akonadi.SlackBuild +++ b/source/l/akonadi/akonadi.SlackBuild @@ -3,7 +3,7 @@ # Slackware build script for akonadi # Copyright 2008 Robby Workman, Northport, Alabama, USA -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -23,11 +23,20 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=1.1.2 -ARCH=${ARCH:-x86_64} +VERSION=1.3.1 BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:--j6} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-akonadi @@ -41,6 +50,9 @@ elif [ "$ARCH" = "i686" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG diff --git a/source/l/akonadi/slack-desc b/source/l/akonadi/slack-desc index d0c26bb62..a120cebf0 100644 --- a/source/l/akonadi/slack-desc +++ b/source/l/akonadi/slack-desc @@ -13,7 +13,7 @@ akonadi: and meta data providing concurrent read, write, and query access. akonadi: It will provide a unique desktop wide object identification and akonadi: retrieval. akonadi: -akonadi: Homepage: http://www.kdepim.org/akonadi/ akonadi: akonadi: +akonadi: Homepage: http://www.kdepim.org/akonadi/ akonadi: diff --git a/source/l/alsa-lib/alsa-lib.SlackBuild b/source/l/alsa-lib/alsa-lib.SlackBuild index f88d84550..dc88e4ad1 100755 --- a/source/l/alsa-lib/alsa-lib.SlackBuild +++ b/source/l/alsa-lib/alsa-lib.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,19 +21,25 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=1.0.18 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +VERSION=${VERSION:-$(echo alsa-lib-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:-" -j7 "} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-alsa-lib -rm -rf $PKG -mkdir -p $TMP $PKG - if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" @@ -43,11 +49,17 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi +rm -rf $PKG +mkdir -p $TMP $PKG + cd $TMP rm -rf alsa-lib-$VERSION -tar xvf $CWD/alsa-lib-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/alsa-lib-$VERSION.tar.?z* || exit 1 cd alsa-lib-$VERSION || exit 1 chown -R root:root . @@ -80,6 +92,14 @@ cp -a \ cp -a COPYING $PKG/usr/doc/alsa-lib-$VERSION/COPYING.lib cp -a aserver/COPYING $PKG/usr/doc/alsa-lib-$VERSION/COPYING.aserver +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/l/apr-util/apr-util.SlackBuild b/source/l/apr-util/apr-util.SlackBuild index a109d75bc..d160cbb96 100755 --- a/source/l/apr-util/apr-util.SlackBuild +++ b/source/l/apr-util/apr-util.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,10 +21,20 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=${VERSION:-1.3.9} -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-$(echo apr-util-*.tar.bz2 | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-2} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + NUMJOBS=${NUMJOBS:-" -j7 "} -BUILD=${BUILD:-1} if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -35,6 +45,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -88,9 +101,17 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" \ mkdir -p $PKG/usr/doc/apr-util-$VERSION cp -a \ - CHANGES INSTALL.MySQL LICENSE NOTICE \ + INSTALL.MySQL LICENSE NOTICE \ $PKG/usr/doc/apr-util-$VERSION +# If there's a CHANGES file, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r CHANGES ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat CHANGES | head -n 1000 > $DOCSDIR/CHANGES + touch -r CHANGES $DOCSDIR/CHANGES +fi + # This just seems like way too much stuff... #mv docs/dox/html $PKG/usr/doc/apr-util-$VERSION diff --git a/source/l/apr/apr.SlackBuild b/source/l/apr/apr.SlackBuild index b6f2237e1..65098b062 100755 --- a/source/l/apr/apr.SlackBuild +++ b/source/l/apr/apr.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,11 +21,21 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=${VERSION:-1.3.8} -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} +VERSION=${VERSION:-$(echo apr-*.tar.bz2 | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +NUMJOBS=${NUMJOBS:-" -j7 "} + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" @@ -35,6 +45,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -74,9 +87,17 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" \ mkdir -p $PKG/usr/doc/apr-$VERSION cp -a \ - CHANGES LICENSE NOTICE README.dev \ + LICENSE NOTICE README.dev \ $PKG/usr/doc/apr-$VERSION +# If there's a CHANGES file, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r CHANGES ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat CHANGES | head -n 1000 > $DOCSDIR/CHANGES + touch -r CHANGES $DOCSDIR/CHANGES +fi + # This just seems like way too much stuff... #mv docs/dox/html $PKG/usr/doc/apr-$VERSION diff --git a/source/l/atk/atk.SlackBuild b/source/l/atk/atk.SlackBuild index 6cea42737..f6d41da66 100755 --- a/source/l/atk/atk.SlackBuild +++ b/source/l/atk/atk.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,12 +21,22 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=1.26.0 -ARCH=${ARCH:-x86_64} +PKGNAM=atk +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:-" -j7 "} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-atk @@ -40,6 +50,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG @@ -73,7 +86,7 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" \ mkdir -p $PKG/usr/doc/atk-$VERSION cp -a \ - AUTHORS COPYING NEWS README TODO \ + AUTHORS COPYING* NEWS README* TODO \ $PKG/usr/doc/atk-$VERSION mkdir -p $PKG/install diff --git a/source/l/attica/attica.SlackBuild b/source/l/attica/attica.SlackBuild new file mode 100755 index 000000000..8e3ab9aa7 --- /dev/null +++ b/source/l/attica/attica.SlackBuild @@ -0,0 +1,99 @@ +#!/bin/sh + +# Copyright 2009, 2010 Eric Hameleers, Eindhoven, NL +# Copyright 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + +VERSION=${VERSION:-0.1.3} +BUILD=${BUILD:-1} +NUMJOBS=${NUMJOBS:--j6} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-attica + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "s390" ]; then + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + +rm -rf $PKG +mkdir -p $TMP $PKG +cd $TMP +rm -rf attica-$VERSION +tar xvf $CWD/attica-$VERSION.tar.?z* || exit 1 +cd attica-$VERSION || exit 1 +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +mkdir -p build +cd build + QTDIR=/usr/lib${LIBDIRSUFFIX}/qt \ + PATH=$QTDIR/bin:$PATH \ + cmake \ + $KDE_OPT_ARGS \ + -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ + -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ + -DCMAKE_INSTALL_PREFIX=/usr \ + -DMAN_INSTALL_DIR=/usr/man \ + -DSYSCONF_INSTALL_DIR=/etc \ + -DLIB_SUFFIX=${LIBDIRSUFFIX} \ + .. + make $NUMJOBS || make || exit 1 + make install DESTDIR=$PKG || exit 1 +cd - + +find $PKG | xargs file | grep -e "executable" -e "shared object" \ + | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + +mkdir -p $PKG/usr/doc/attica-$VERSION +cp -a AUTHORS* COPYING* README* \ + $PKG/usr/doc/attica-$VERSION + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc + +cd $PKG +/sbin/makepkg -l y -c n $TMP/attica-$VERSION-$ARCH-$BUILD.txz + diff --git a/source/l/attica/slack-desc b/source/l/attica/slack-desc new file mode 100644 index 000000000..40e293f5b --- /dev/null +++ b/source/l/attica/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler-------------------------------------------------------| +attica: attica (Qt Collaboration library) +attica: +attica: Attica is a Qt library that implements the freedesktop.org +attica: specification for the Open Collaboration Services API version 1.4. +attica: It grants easy access to the services such as querying information +attica: about persons and contents. +attica: +attica: +attica: +attica: Homepage: http://www.kde.org +attica: diff --git a/source/l/babl/babl-0.1.0-build-fixes.patch b/source/l/babl/babl-0.1.0-build-fixes.patch new file mode 100644 index 000000000..3cd055943 --- /dev/null +++ b/source/l/babl/babl-0.1.0-build-fixes.patch @@ -0,0 +1,20 @@ +--- babl-0.1.0.orig/extensions/Makefile.am 2009-04-17 12:05:15.000000000 -0500 ++++ babl-0.1.0/extensions/Makefile.am 2009-08-19 00:53:21.435970261 -0500 +@@ -1,7 +1,7 @@ + if OS_WIN32 + AM_LDFLAGS = -module -no-undefined + else +-AM_LDFLAGS = -module ++AM_LDFLAGS = -module -avoid-version + endif + + noinst_HEADERS = util.h +@@ -12,7 +12,7 @@ + -I$(top_srcdir)/babl \ + -I$(top_srcdir)/extensions + +-extdir = $(DESTDIR)$(libdir)/babl-@BABL_API_VERSION@ ++extdir = $(libdir)/babl-@BABL_API_VERSION@ + ext_LTLIBRARIES = \ + CIE-Lab.la \ + gegl-fixups.la \ diff --git a/source/l/babl/babl.SlackBuild b/source/l/babl/babl.SlackBuild index d646e0d2c..5e8f54afd 100755 --- a/source/l/babl/babl.SlackBuild +++ b/source/l/babl/babl.SlackBuild @@ -22,7 +22,7 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=0.0.22 +VERSION=0.1.0 ARCH=${ARCH:-x86_64} BUILD=${BUILD:-1} @@ -49,6 +49,10 @@ cd $TMP rm -rf babl-$VERSION tar xvf $CWD/babl-$VERSION.tar.bz2 || exit 1 cd babl-$VERSION || exit 1 + +zcat $CWD/babl-0.1.0-build-fixes.patch.gz | patch -p1 || exit 1 +sh autogen.sh + chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ diff --git a/source/l/boost/boost.SlackBuild b/source/l/boost/boost.SlackBuild index bb9e8e8fb..508c8ff94 100755 --- a/source/l/boost/boost.SlackBuild +++ b/source/l/boost/boost.SlackBuild @@ -2,7 +2,7 @@ # Copyright 2007, 2008 Eric Hameleers, Eindhoven, NL # Copyright 2007-2008 Heinz Wiesinger -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -25,9 +25,19 @@ # bjam-build system mostly taken from SlackBuild by Eric Hameleers # Script modified by Robby Workman - no copyright claims or added terms -VERSION=1_38_0 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +PKGNAM=boost +VERSION=${VERSION:-$(echo $PKGNAM_*.tar.?z* | rev | cut -f 3- -d . | rev | cut -f 2- -d _)} +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi CWD=$(pwd) TMP=${TMP:-/tmp} @@ -45,17 +55,18 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG mkdir -p $TMP $PKG cd $TMP rm -rf boost_$VERSION -tar xvf $CWD/boost_$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/boost_$VERSION.tar.?z* || exit 1 cd boost_$VERSION || exit 1 -zcat $CWD/boost.ifdef_placement.diff.gz | patch -p1 --verbose || exit 1 - chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -132,7 +143,7 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" \ mkdir -p $PKG/usr/doc/boost-$PKG_VERSION # Do not copy 44MB of developer 'doc/html' into our package... -cp -a LICENSE_1_0.txt $PKG/usr/doc/boost-$PKG_VERSION +cp -a LICENSE* index.html $PKG/usr/doc/boost-$PKG_VERSION find $PKG/usr/doc -type f -exec chmod 0644 {} \; mkdir -p $PKG/install diff --git a/source/l/boost/boost.ifdef_placement.diff b/source/l/boost/boost.ifdef_placement.diff deleted file mode 100644 index 92dd6b55c..000000000 --- a/source/l/boost/boost.ifdef_placement.diff +++ /dev/null @@ -1,14 +0,0 @@ ---- ./boost/function/function_template.hpp.orig 2008-10-16 08:21:50.000000000 -0500 -+++ ./boost/function/function_template.hpp 2009-08-24 20:45:28.000000000 -0500 -@@ -950,10 +950,10 @@ - f.vtable->manager(f.functor, this->functor, - boost::detail::function::move_functor_tag); - f.vtable = 0; --#if !defined(BOOST_NO_EXCEPTIONS) - } else { - clear(); - } -+#if !defined(BOOST_NO_EXCEPTIONS) - } catch (...) { - vtable = 0; - throw; diff --git a/source/l/cairo/cairo.SlackBuild b/source/l/cairo/cairo.SlackBuild index a6ddc3447..655cf2f49 100755 --- a/source/l/cairo/cairo.SlackBuild +++ b/source/l/cairo/cairo.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008-2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,10 +21,19 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=1.8.6 -ARCH=${ARCH:-x86_64} +VERSION=1.8.8 BUILD=${BUILD:-3} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + NUMJOBS=${NUMJOBS:-" -j7 "} if [ "$ARCH" = "i486" ]; then @@ -36,6 +45,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -46,7 +58,7 @@ mkdir -p $TMP $PKG cd $TMP rm -rf cairo-$VERSION -tar xvf $CWD/cairo-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/cairo-$VERSION.tar.?z* || exit 1 cd cairo-$VERSION chown -R root:root . find . \ @@ -55,6 +67,9 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; +# Use libpng-1.4.x: +zcat $CWD/cairo.libpng14.diff.gz | patch -p0 --verbose || exit 1 + # Time to try leaving this out again? # --disable-xcb diff --git a/source/l/cairo/cairo.libpng14.diff b/source/l/cairo/cairo.libpng14.diff new file mode 100644 index 000000000..12bed2c0e --- /dev/null +++ b/source/l/cairo/cairo.libpng14.diff @@ -0,0 +1,11 @@ +--- ./configure.orig 2009-06-16 07:25:50.000000000 -0500 ++++ ./configure 2010-05-03 00:12:23.000000000 -0500 +@@ -27890,7 +27890,7 @@ + + if test "x$png_REQUIRES" = x; then + # libpng13 is GnuWin32's libpng-1.2.8 :-( +- for l in libpng12 libpng13 libpng10 ; do ++ for l in libpng14 libpng12 libpng13 libpng10 ; do + if $PKG_CONFIG --exists $l ; then + png_REQUIRES=$l + use_png=yes diff --git a/source/l/dbus-glib/dbus-glib.SlackBuild b/source/l/dbus-glib/dbus-glib.SlackBuild index 6c242f78d..dc8afddac 100755 --- a/source/l/dbus-glib/dbus-glib.SlackBuild +++ b/source/l/dbus-glib/dbus-glib.SlackBuild @@ -23,12 +23,21 @@ PRGNAM=dbus-glib -VERSION=0.80 -ARCH=${ARCH:-x86_64} +VERSION=0.86 BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:--j7} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-$PRGNAM @@ -64,6 +73,7 @@ CXXFLAGS="$SLKCFLAGS" \ --libdir=/usr/lib${LIBDIRSUFFIX} \ --sysconfdir=/etc \ --localstatedir=/var \ + --mandir=/usr/man \ --enable-shared=yes \ --enable-static=no \ --build=$ARCH-slackware-linux @@ -74,6 +84,8 @@ make install DESTDIR=$PKG || exit 1 find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null +gzip -9 $PKG/usr/man/man?/*.? + mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION cp -a \ AUTHORS COPYING* HACKING INSTALL NEWS README* \ diff --git a/source/l/dbus-python/dbus-python.SlackBuild b/source/l/dbus-python/dbus-python.SlackBuild index d3a0dbeff..a9ff5e5b7 100755 --- a/source/l/dbus-python/dbus-python.SlackBuild +++ b/source/l/dbus-python/dbus-python.SlackBuild @@ -23,12 +23,21 @@ # http://dbus.freedesktop.org/releases/dbus-python/ - PRGNAM=dbus-python -VERSION=${VERSION:-0.83.0} -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-0.83.1} +BUILD=${BUILD:-1} + NUMJOBS=${NUMJOBS:-" -j7 "} -BUILD=${BUILD:-2} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi CWD=$(pwd) TMP=${TMP:-/tmp} @@ -43,6 +52,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG diff --git a/source/l/desktop-file-utils/desktop-file-utils.SlackBuild b/source/l/desktop-file-utils/desktop-file-utils.SlackBuild index 86d62f239..8beccbd5b 100755 --- a/source/l/desktop-file-utils/desktop-file-utils.SlackBuild +++ b/source/l/desktop-file-utils/desktop-file-utils.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2006, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,10 +22,20 @@ PKGNAM=desktop-file-utils -VERSION=${VERSION:-0.15} -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-2} + NUMJOBS=${NUMJOBS:-" -j7 "} -BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi CWD=$(pwd) TMP=${TMP:-/tmp} @@ -37,6 +47,8 @@ elif [ "$ARCH" = "s390" ]; then SLKCFLAGS="-O2" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" +else + SLKCFLAGS="-O2" fi rm -rf $PKG @@ -46,6 +58,8 @@ rm -rf ${PKGNAM}-${VERSION} tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1 cd ${PKGNAM}-$VERSION || exit 1 +zcat $CWD/desktop-file-utils.quiet.warnings.diff.gz | patch -p1 --verbose || exit 1 + # Make sure ownerships and permissions are sane: chown -R root:root . find . \ @@ -100,6 +114,14 @@ cp -a \ AUTHORS COPYING* INSTALL NEWS README* \ $PKG/usr/doc/${PKGNAM}-$VERSION +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh diff --git a/source/l/desktop-file-utils/desktop-file-utils.quiet.warnings.diff b/source/l/desktop-file-utils/desktop-file-utils.quiet.warnings.diff new file mode 100644 index 000000000..8e1f17f96 --- /dev/null +++ b/source/l/desktop-file-utils/desktop-file-utils.quiet.warnings.diff @@ -0,0 +1,18 @@ +--- ./src/update-desktop-database.c.orig 2010-03-09 20:33:41.000000000 -0600 ++++ ./src/update-desktop-database.c 2010-05-11 09:00:08.000000000 -0500 +@@ -135,15 +135,9 @@ + case MU_VALID: + break; + case MU_DISCOURAGED: +- udd_print (_("Warning in file \"%s\": usage of MIME type \"%s\" is " +- "discouraged (%s)\n"), +- desktop_file, mime_types[i], valid_error); + g_free (valid_error); + break; + case MU_INVALID: +- udd_print (_("Error in file \"%s\": \"%s\" is an invalid MIME type " +- "(%s)\n"), +- desktop_file, mime_types[i], valid_error); + g_free (valid_error); + /* not a break: we continue to the next mime type */ + continue; diff --git a/source/l/djvulibre/djvulibre.SlackBuild b/source/l/djvulibre/djvulibre.SlackBuild index ece718070..28e00a67b 100755 --- a/source/l/djvulibre/djvulibre.SlackBuild +++ b/source/l/djvulibre/djvulibre.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh # Copyright 2008 Robby Workman, Northport, Alabama, USA -# Copyright 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,14 +22,23 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -PRGNAM=djvulibre -VERSION=${VERSION:-3.5.21} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-1} +PKGNAM=djvulibre +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-2} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-$PRGNAM +PKG=$TMP/package-$PKGNAM if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -40,14 +49,17 @@ elif [ "$ARCH" = "i686" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG mkdir -p $TMP $PKG cd $TMP || exit 1 -rm -rf $PRGNAM-$VERSION -tar xvf $CWD/$PRGNAM-$VERSION.tar.bz2 || exit 1 -cd $PRGNAM-$VERSION || exit 1 +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1 +cd $PKGNAM-$VERSION || exit 1 chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -69,7 +81,7 @@ CXXFLAGS="$SLKCFLAGS" \ --sysconfdir=/etc \ --mandir=/usr/man \ --infodir=/usr/info \ - --docdir=/usr/doc/$PRGNAM-$VERSION \ + --docdir=/usr/doc/$PKGNAM-$VERSION \ --with-qt=/usr/lib${LIBDIRSUFFIX}/qt \ --build=$ARCH-slackware-linux @@ -102,15 +114,15 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" \ for i in $(find . -type l) ; do ln -s $(readlink $i).gz $i.gz ; rm $i ; done ) -mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION cp -a \ COPYING* COPYRIGHT INSTALL NEWS README* TODO \ - $PKG/usr/doc/$PRGNAM-$VERSION + $PKG/usr/doc/$PKGNAM-$VERSION mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh cd $PKG -/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/l/ebook-tools/ebook-tools.SlackBuild b/source/l/ebook-tools/ebook-tools.SlackBuild new file mode 100755 index 000000000..690d71def --- /dev/null +++ b/source/l/ebook-tools/ebook-tools.SlackBuild @@ -0,0 +1,113 @@ +#!/bin/sh + +# Copyright 2010 Eric Hameleers, Eindhoven, NL +# Copyright 2010 Patrick J. Volkerding, Sebeka, MN, USA +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + +PKGNAM=ebook-tools +VERSION=${VERSION:-0.1.1} +BUILD=${BUILD:-2} + +NUMJOBS=${NUMJOBS:-" -j7 "} + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-${PKGNAM} +rm -rf $PKG +mkdir -p $TMP $PKG + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "s390" ]; then + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + +cd $TMP +rm -rf ${PKGNAM}-${VERSION} +tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1 +cd ${PKGNAM}-$VERSION || exit 1 + +# Fix some hard-coded pathnames for 64-bit: +cat $CWD/ebook-tools.paths.diff | patch -p1 --verbose || exit 1 + +# Make sure ownerships and permissions are sane: +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +# Build and install: +mkdir -p build +cd build + cmake \ + -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ + -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ + -DCMAKE_INSTALL_PREFIX=/usr \ + -DLIB_INSTALL_DIR=/usr/lib${LIBDIRSUFFIX} \ + -DMAN_INSTALL_DIR=/usr/man \ + -DSYSCONF_INSTALL_DIR=/etc \ + -DINCLUDE_INSTALL_DIR=/usr/include \ + -DLIB_SUFFIX=${LIBDIRSUFFIX} \ + .. + make $NUMJOBS || make || exit 1 + make install DESTDIR=$PKG || exit 1 +cd - + +# Remove lit2epub binary because it doesn't work without clit (which has +# distribution restrictions so we do not include it) +rm -f $PKG/usr/bin/lit2epub + +# Strip binaries: +find $PKG | xargs file | grep -e "executable" -e "shared object" \ + | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + +# Add a documentation directory: +mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION +cp -a \ + INSTALL LICENSE README TODO \ + $PKG/usr/doc/${PKGNAM}-$VERSION + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc + +cd $PKG +/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz + diff --git a/source/l/ebook-tools/ebook-tools.paths.diff b/source/l/ebook-tools/ebook-tools.paths.diff new file mode 100644 index 000000000..3752b1069 --- /dev/null +++ b/source/l/ebook-tools/ebook-tools.paths.diff @@ -0,0 +1,12 @@ +diff -ur ebook-tools-0.1.1/src/libepub/CMakeLists.txt ebook-tools-0.1.1.rmhardcoded/src/libepub/CMakeLists.txt +--- ebook-tools-0.1.1/src/libepub/CMakeLists.txt 2008-06-07 20:20:14.000000000 +0100 ++++ ebook-tools-0.1.1.rmhardcoded/src/libepub/CMakeLists.txt 2008-12-15 02:59:58.621077025 +0000 +@@ -4,5 +4,5 @@ + + set_target_properties (epub PROPERTIES VERSION 0.1.1 SOVERSION 0) + +-install ( TARGETS epub RUNTIME DESTINATION bin LIBRARY DESTINATION lib ARCHIVE DESTINATION lib ) +-install ( FILES epub.h epub_shared.h DESTINATION include ) ++install ( TARGETS epub RUNTIME DESTINATION bin LIBRARY DESTINATION ${LIB_INSTALL_DIR} ARCHIVE DESTINATION ${LIB_INSTALL_DIR} ) ++install ( FILES epub.h epub_shared.h DESTINATION ${INCLUDE_INSTALL_DIR} ) + diff --git a/source/l/ebook-tools/slack-desc b/source/l/ebook-tools/slack-desc new file mode 100644 index 000000000..abb2ef883 --- /dev/null +++ b/source/l/ebook-tools/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler--------------------------------------------------| +ebook-tools: ebook-tools (access and convert various ebook file formats) +ebook-tools: +ebook-tools: Tools for accessing and converting various ebook file formats. +ebook-tools: +ebook-tools: +ebook-tools: +ebook-tools: +ebook-tools: +ebook-tools: +ebook-tools: Home page: http://sourceforge.net/projects/ebook-tools/ +ebook-tools: diff --git a/source/l/eggdbus/eggdbus.SlackBuild b/source/l/eggdbus/eggdbus.SlackBuild new file mode 100755 index 000000000..44a0c938e --- /dev/null +++ b/source/l/eggdbus/eggdbus.SlackBuild @@ -0,0 +1,123 @@ +#!/bin/sh + +# Slackware build script for eggdbus + +# Copyright 2009 Robby Workman Northport, Alabama, USA +# Copyright 2010 Eric Hameleers, Eindhoven, NL +# Copyright 2010 Patrick J. Volkerding, Sebeka, MN, USA +# All rights reserved. + +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +PRGNAM=eggdbus +VERSION=${VERSION:-0.6} +BUILD=${BUILD:-1} + +NUMJOBS=${NUMJOBS:--j6} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-$PRGNAM + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "i686" ]; then + SLKCFLAGS="-O2 -march=i686 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + +rm -rf $PKG +mkdir -p $TMP $PKG +cd $TMP +rm -rf $PRGNAM-$VERSION +tar xvf $CWD/$PRGNAM-$VERSION.tar.bz2 || exit 1 +cd $PRGNAM-$VERSION || exit 1 + +# Make sure ownerships and permissions are sane: +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +# Configure: +CFLAGS="$SLKCFLAGS" \ +CXXFLAGS="$SLKCFLAGS" \ +./autogen.sh \ + --prefix=/usr \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --sysconfdir=/etc \ + --localstatedir=/var \ + --mandir=/usr/man \ + --docdir=/usr/doc/$PRGNAM-$VERSION \ + --disable-static \ + --build=$ARCH-slackware-linux + +# Build and install: +make $NUMJOBS || make || exit 1 +make install DESTDIR=$PKG || exit 1 + +# Strip binaries: +find $PKG | xargs file | grep -e "executable" -e "shared object" \ + | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + +# Compress and link manpages, if any: +if [ -d $PKG/usr/man ]; then + ( cd $PKG/usr/man + for manpagedir in $(find . -type d -name "man*") ; do + ( cd $manpagedir + for eachpage in $( find . -type l -maxdepth 1) ; do + ln -s $( readlink $eachpage ).gz $eachpage.gz + rm $eachpage + done + gzip -9 *.* + ) + done + ) +fi + +# Add a documentation directory: +mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +cp -a \ + AUTHORS COPYING ChangeLog HACKING INSTALL NEWS README \ + $PKG/usr/doc/$PRGNAM-$VERSION + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc + +cd $PKG +/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz + diff --git a/source/l/eggdbus/slack-desc b/source/l/eggdbus/slack-desc new file mode 100644 index 000000000..d2da2980c --- /dev/null +++ b/source/l/eggdbus/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler------------------------------------------------------| +eggdbus: eggdbus (D-Bus bindings for GObject) +eggdbus: +eggdbus: Experimental D-Bus bindings for GObject. +eggdbus: +eggdbus: +eggdbus: +eggdbus: +eggdbus: +eggdbus: +eggdbus: Home: http://cgit.freedesktop.org/~david/eggdbus +eggdbus: diff --git a/source/l/eigen2/eigen2.SlackBuild b/source/l/eigen2/eigen2.SlackBuild index 4477b13cf..474e5ae91 100755 --- a/source/l/eigen2/eigen2.SlackBuild +++ b/source/l/eigen2/eigen2.SlackBuild @@ -22,10 +22,19 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=r948353 -ARCH=${ARCH:-x86_64} +VERSION=2.0.10 BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-eigen2 @@ -39,14 +48,17 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG mkdir -p $TMP $PKG cd $TMP || exit 1 -rm -rf eigen2-$VERSION -tar xvf $CWD/eigen2-$VERSION.tar.bz2 || exit 1 -cd eigen2-$VERSION || exit 1 +rm -rf eigen-$VERSION +tar xvf $CWD/eigen2-$VERSION.tar.?z* || exit 1 +cd eigen || exit 1 chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ diff --git a/source/l/enchant/enchant.SlackBuild b/source/l/enchant/enchant.SlackBuild index bcd2cd7e9..d4f0eb9bc 100755 --- a/source/l/enchant/enchant.SlackBuild +++ b/source/l/enchant/enchant.SlackBuild @@ -24,11 +24,20 @@ # Modified by Robby Workman <rworkman at slackware.com> -VERSION=1.4.2 -ARCH=${ARCH:-x86_64} +VERSION=1.5.0 BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:-" -j6 "} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-enchant @@ -42,13 +51,16 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG mkdir -p $TMP $PKG cd $TMP rm -rf enchant-$VERSION -tar xvf $CWD/enchant-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/enchant-$VERSION.tar.xz || exit 1 cd enchant-$VERSION || exit 1 chown -R root:root . find . \ diff --git a/source/l/exiv2/exiv2.SlackBuild b/source/l/exiv2/exiv2.SlackBuild index 783fd7c57..2092df166 100755 --- a/source/l/exiv2/exiv2.SlackBuild +++ b/source/l/exiv2/exiv2.SlackBuild @@ -24,11 +24,20 @@ # Modified by Robby Workman <rworkman at slackware.com> -VERSION=0.18.1 -ARCH=${ARCH:-x86_64} +VERSION=0.18.2 BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:--j6} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-exiv2 @@ -42,6 +51,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG diff --git a/source/l/fftw/fftw.SlackBuild b/source/l/fftw/fftw.SlackBuild new file mode 100755 index 000000000..ffed6f95c --- /dev/null +++ b/source/l/fftw/fftw.SlackBuild @@ -0,0 +1,152 @@ +#!/bin/sh + +# Slackware build script for fftw +# Written by Kyle Guinn <elyk03@gmail.com> + +PRGNAM=fftw +VERSION=${VERSION:-3.2.2} +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-$PRGNAM-$VERSION +OUTPUT=${OUTPUT:-/tmp} + +DOCS="AUTHORS CONVENTIONS COPY* INSTALL NEWS README* TODO doc/html" + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "i686" ]; then + SLKCFLAGS="-O2 -march=i686 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + +if [ "${PORTABLE:-yes}" = "no" ]; then + # According to doc/fftw3.pdf the configure script should choose the best + # value for $CFLAGS. These variables must be unset so that the configure + # script will decide. + + # If you are interested in further optimizations such as alternative + # multithreading and support for other processors, check this page for + # details: + # http://www.fftw.org/fftw3_doc/Installation-on-Unix.html + unset CFLAGS + unset CXXFLAGS + unset FFLAGS + PKGARCH="custom" + do_portable="" +else + PKGARCH=$ARCH + do_portable="--enable-portable-binary" +fi + +if [ "${SSE:-no}" = "no" ]; then + do_sse="" +else + do_sse="--enable-sse" +fi + +if [ "${SSE2:-no}" = "no" ]; then + do_sse2="" +else + do_sse2="--enable-sse2" +fi + +rm -rf $PKG +mkdir -p $TMP $PKG $OUTPUT +cd $TMP +rm -rf $PRGNAM-$VERSION +tar xvf $CWD/$PRGNAM-$VERSION.tar.?z* || exit 1 +cd $PRGNAM-$VERSION +chown -R root:root . +chmod -R u+w,go+r-w,a-st . + +# compile libfftw3 +./configure \ + --prefix=/usr \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --sysconfdir=/etc \ + --localstatedir=/var \ + --mandir=/usr/man \ + --infodir=/usr/info \ + --docdir=/usr/doc/fftw-$VERSION \ + --enable-shared \ + --disable-static \ + --enable-threads \ + $do_sse2 \ + $do_portable +make -j4 || exit 1 +make install-strip DESTDIR=$PKG || exit 1 + +# compile libfftw3f +./configure \ + --prefix=/usr \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --sysconfdir=/etc \ + --localstatedir=/var \ + --mandir=/usr/man \ + --infodir=/usr/info \ + --docdir=/usr/doc/fftw-$VERSION \ + --enable-shared \ + --disable-static \ + --enable-threads \ + --enable-float \ + $do_sse \ + $do_portable +make -j4 || exit 1 +make install-strip DESTDIR=$PKG || exit 1 + +# compile libfftw3l +./configure \ + --prefix=/usr \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --sysconfdir=/etc \ + --localstatedir=/var \ + --mandir=/usr/man \ + --infodir=/usr/info \ + --docdir=/usr/doc/fftw-$VERSION \ + --enable-shared \ + --disable-static \ + --enable-threads \ + --enable-long-double \ + $do_portable +make -j4 || exit 1 +make install-strip DESTDIR=$PKG || exit 1 + +( cd $PKG/usr/man + find . -type f -exec gzip -9 {} \; + for i in $(find . -type l); do \ + ln -s $(readlink $i).gz $i.gz; \ + rm $i; \ + done +) + +rm -f $PKG/usr/info/dir +gzip -9 $PKG/usr/info/* + +mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +cp -a $DOCS $PKG/usr/doc/$PRGNAM-$VERSION +cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc + +cd $PKG +/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/l/fftw/slack-desc b/source/l/fftw/slack-desc new file mode 100644 index 000000000..22a1130c2 --- /dev/null +++ b/source/l/fftw/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler------------------------------------------------------| +fftw: fftw (Fastest Fourier Transform in the West) +fftw: +fftw: FFTW is a free collection of fast C routines for computing the +fftw: Discrete Fourier Transform in one or more dimensions. It includes +fftw: complex, real, symmetric, and parallel transforms, and can handle +fftw: arbitrary array sizes efficiently. FFTW is typically faster than +fftw: other publically-available FFT implementations, and is even +fftw: competitive with vendor-tuned libraries. +fftw: +fftw: Homepage: http://www.fftw.org/ +fftw: diff --git a/source/l/freetype/freetype.SlackBuild b/source/l/freetype/freetype.SlackBuild index 69c3f844b..1c1b25d39 100755 --- a/source/l/freetype/freetype.SlackBuild +++ b/source/l/freetype/freetype.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2005-2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2005-2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,12 +21,21 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=2.3.9 -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-$(echo freetype-*.tar.?z* | cut -d - -f 2 | rev | cut -f 3- -d . | rev)} BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:-" -j7 "} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" @@ -36,17 +45,20 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-freetype + rm -rf $PKG mkdir -p $TMP $PKG - cd $TMP rm -rf freetype-$VERSION -tar xvf $CWD/freetype-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/freetype-$VERSION.tar.?z* || exit 1 cd freetype-$VERSION chown -R root:root . @@ -75,7 +87,7 @@ zcat $CWD/freetype.illadvisederror.diff.gz | patch -p1 --verbose || exit 1 #zcat $CWD/freetype.subpixel.rendering.diff.gz | patch -p1 --verbose || exit 1 chown -R root:root . -CFLAGS="$SLKCFLAGS" make setup CFG="--prefix=/usr --libdir=/usr/lib${LIBDIRSUFFIX} $ARCH-slackware-linux" +CFLAGS="$SLKCFLAGS" make setup CFG="--prefix=/usr --libdir=/usr/lib${LIBDIRSUFFIX} --build=$ARCH-slackware-linux" make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG diff --git a/source/l/fuse/fuse.SlackBuild b/source/l/fuse/fuse.SlackBuild index 96569eeab..0c5ddaa2d 100755 --- a/source/l/fuse/fuse.SlackBuild +++ b/source/l/fuse/fuse.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh # Copyright (c) 2008, Antonio Hernandez Blas <hba.nihilismus@gmail.com> -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use in source and binary forms, with or without @@ -23,36 +23,46 @@ # Modified by Robby Workman <rworkman@slackware.com> # Modified by Eric Hameleers <alien@slackware.com> -PRGNAM=fuse -VERSION=2.7.4 -ARCH=${ARCH:-x86_64} +PKGNAM=fuse +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} + NUMJOBS=${NUMJOBS:-" -j7 "} -BUILD=${BUILD:-2} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-$PRGNAM +PKG=$TMP/package-$PKGNAM if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" -elif [ "$ARCH" = "i686" ]; then - SLKCFLAGS="-O2 -march=i686 -mtune=i686" - LIBDIRSUFFIX="" elif [ "$ARCH" = "s390" ]; then SLKCFLAGS="-O2" LIBDIRSUFFIX="" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG mkdir -p $TMP $PKG cd $TMP -rm -rf $PRGNAM-$VERSION -tar xvf $CWD/$PRGNAM-$VERSION.tar.gz -cd $PRGNAM-$VERSION +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1 +cd $PKGNAM-$VERSION chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -71,11 +81,10 @@ CXXFLAGS="$SLKCFLAGS" \ --includedir=/usr/include \ --localstatedir=/var \ --mandir=/usr/man \ - --docdir=/usr/doc/$PRGNAM-$VERSION \ + --docdir=/usr/doc/$PKGNAM-$VERSION \ --enable-lib \ --enable-util \ --disable-static \ - --disable-kernel-module \ --build=${ARCH}-slackware-linux \ || exit 1 @@ -96,16 +105,24 @@ rm -rf $PKG/dev mkdir -p $PKG/lib mv $PKG/etc/udev $PKG/lib -mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION cp -a \ AUTHORS COPYING COPYING.LIB FAQ Filesystems INSTALL NEWS README \ README.NFS doc/how-fuse-works doc/kernel.txt \ - $PKG/usr/doc/$PRGNAM-$VERSION + $PKG/usr/doc/$PKGNAM-$VERSION + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh cd $PKG -/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/l/gd/gd.SlackBuild b/source/l/gd/gd.SlackBuild index a367412bc..c33f20ba1 100755 --- a/source/l/gd/gd.SlackBuild +++ b/source/l/gd/gd.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2006, 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006, 2007, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -23,10 +23,19 @@ PKGNAM=gd VERSION=${VERSION:-2.0.35} -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} -BUILD=${BUILD:-3} +BUILD=${BUILD:-4} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi +NUMJOBS=${NUMJOBS:-" -j7 "} CWD=$(pwd) TMP=${TMP:-/tmp} @@ -44,13 +53,18 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi cd $TMP rm -rf ${PKGNAM}-${VERSION} -tar xvf $CWD/${PKGNAM}-$VERSION.tar.bz2 +tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1 cd ${PKGNAM}-$VERSION +zcat $CWD/gd.png14.diff.gz | patch -p1 --verbose || exit 1 + # Make sure ownerships and permissions are sane: chown -R root:root . find . \ diff --git a/source/l/gd/gd.png14.diff b/source/l/gd/gd.png14.diff new file mode 100644 index 000000000..49841ee4f --- /dev/null +++ b/source/l/gd/gd.png14.diff @@ -0,0 +1,65 @@ +--- ./configure.ac.orig 2007-04-25 07:48:41.000000000 -0500 ++++ ./configure.ac 2010-02-12 01:37:29.000000000 -0600 +@@ -342,20 +342,20 @@ + [ --with-png=DIR where to find the png library],, + withval=yes) + +-# libpng12.so is a nightmare. We have to test separately for +-# libpng12-config and libpng-config. If we find libpng12-config, ++# libpng14.so is a nightmare. We have to test separately for ++# libpng14-config and libpng-config. If we find libpng14-config, + # we don't look for the other, which will just be a symlink to it, + # confusing autoconf into thinking the library itself will be named -lpng, + # which it won't be. Awful. This code will suffice unless the libpng + # authors decide to do this AGAIN. Which I really hope they won't. TBB + + if test "$withval" != no; then +- AC_PATH_PROG([LIBPNG12_CONFIG], [libpng12-config]) ++ AC_PATH_PROG([LIBPNG14_CONFIG], [libpng14-config]) + AC_PATH_PROG([LIBPNG_CONFIG], [libpng-config]) +- if test -n "$LIBPNG12_CONFIG"; then +- libpng_CPPFLAGS=`libpng12-config --cflags` ++ if test -n "$LIBPNG14_CONFIG"; then ++ libpng_CPPFLAGS=`libpng14-config --cflags` + # should be --ldopts, but it's currently broken +- libpng_LDFLAGS=`libpng12-config --ldflags` ++ libpng_LDFLAGS=`libpng14-config --ldflags` + libpng_LDFLAGS=`echo " $libpng_LDFLAGS" | sed 's/ -l[[^ ]][[^ ]]*//g'` + elif test -n "$LIBPNG_CONFIG"; then + libpng_CPPFLAGS=`libpng-config --cflags` +@@ -375,9 +375,9 @@ + _ldflags="$LDFLAGS" + LDFLAGS="$libpng_LDFLAGS $LDFLAGS" + +- if test -n "$LIBPNG12_CONFIG"; then +- AC_CHECK_LIB(png12,png_create_read_struct, +- [LIBS="-lpng12 $LIBS" ++ if test -n "$LIBPNG14_CONFIG"; then ++ AC_CHECK_LIB(png14,png_create_read_struct, ++ [LIBS="-lpng14 $LIBS" + FEATURES="GD_PNG $FEATURES" + AC_DEFINE(HAVE_LIBPNG, 1, [ Define if you have the png library. ])], + [LDFLAGS="$_ldflags" +@@ -402,9 +402,9 @@ + AC_MSG_WARN([libpng is required - see http://www.libpng.org/pub/png/]) + fi + +-#TBB: png12's png_create_read_struct is just as good ++#TBB: png14's png_create_read_struct is just as good + #2.0.23: should be = not == +-if test "$ac_cv_lib_png12_png_create_read_struct" = yes; then ++if test "$ac_cv_lib_png14_png_create_read_struct" = yes; then + ac_cv_lib_png_png_create_read_struct=yes + fi + +--- ./gd_png.c.orig 2007-06-14 14:51:41.000000000 -0500 ++++ ./gd_png.c 2010-02-12 01:43:36.000000000 -0600 +@@ -149,7 +149,7 @@ + return NULL; + } + +- if (!png_check_sig (sig, 8)) { /* bad signature */ ++ if (!(png_sig_cmp(sig, 0, 8) == 0)) { /* bad signature */ + return NULL; /* bad signature */ + } + diff --git a/source/l/gd/gdlib.pc b/source/l/gd/gdlib.pc index 7bd439b63..e39512638 100644 --- a/source/l/gd/gdlib.pc +++ b/source/l/gd/gdlib.pc @@ -10,5 +10,5 @@ Name: gd-devel Description: A graphics library for quick creation of PNG or JPEG images Version: @VERSION@ Requires: -Libs: -lXpm -lX11 -ljpeg -lfontconfig -lfreetype -lpng12 -lz -lm +Libs: -lXpm -lX11 -ljpeg -lfontconfig -lfreetype -lpng14 -lz -lm Cflags: -I${prefix}/include diff --git a/source/l/gegl/gegl.SlackBuild b/source/l/gegl/gegl.SlackBuild index cc5855224..86e07aa89 100755 --- a/source/l/gegl/gegl.SlackBuild +++ b/source/l/gegl/gegl.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # Copyright 2008, 2009 Robby Workman, Northport, Alabama, USA # All rights reserved. # @@ -22,9 +22,18 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=0.0.22 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-1} +VERSION=${VERSION:-$(echo gegl-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-2} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi NUMJOBS=${NUMJOBS:-" -j7 "} @@ -41,6 +50,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG @@ -63,6 +75,7 @@ CFLAGS="$SLKCFLAGS" \ --libdir=/usr/lib${LIBDIRSUFFIX} \ --docdir=/usr/doc/gegl-$VERSION \ --enable-gtk-doc \ + --disable-docs \ --enable-mmx \ --disable-sse \ --build=$ARCH-slackware-linux @@ -77,7 +90,15 @@ mkdir -p $PKG/usr/doc/gegl-$VERSION cp -a \ AUTHORS COPYING* INSTALL NEWS README TODO \ $PKG/usr/doc/gegl-$VERSION -( cd $PKG/usr/doc/gegl-$VERSION ; ln -s /usr/share/gtk-doc/html/gegl/ html ) +#( cd $PKG/usr/doc/gegl-$VERSION ; ln -s /usr/share/gtk-doc/html/gegl/ html ) + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/l/libungif/libungif.SlackBuild b/source/l/giflib/giflib.SlackBuild index 5e9ff8c06..e2390a253 100755 --- a/source/l/libungif/libungif.SlackBuild +++ b/source/l/giflib/giflib.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -20,11 +20,20 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +VERSION=${VERSION:-$(echo giflib-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} -VERSION=4.1.4 -ARCH=${ARCH:-x86_64} NUMJOBS=${NUMJOBS:-" -j7 "} -BUILD=${BUILD:-4} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -35,18 +44,21 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-libungif +PKG=$TMP/package-giflib + rm -rf $PKG mkdir -p $TMP $PKG - cd $TMP -rm -rf libungif-$VERSION -tar xvf $CWD/libungif-$VERSION.tar.bz2 || exit 1 -cd libungif-$VERSION +rm -rf giflib-$VERSION +tar xvf $CWD/giflib-$VERSION.tar.?z* || exit 1 +cd giflib-$VERSION chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -58,36 +70,40 @@ CFLAGS="$SLKCFLAGS" \ ./configure \ --prefix=/usr \ --libdir=/usr/lib${LIBDIRSUFFIX} \ + --mandir=/usr/man \ --with-x=no \ - $ARCH-slackware-linux + --disable-static \ + --build=$ARCH-slackware-linux make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG || exit 1 -mkdir -p $PKG/usr/doc/libungif-$VERSION +# Make some compatibility symlinks +( cd $PKG/usr/lib${LIBDIRSUFFIX} + ln -s libgif.so.4 libungif.so.4 + ln -s libgif.so libungif.so +) + +mkdir -p $PKG/usr/doc/giflib-$VERSION cp -a \ - AUTHORS BUGS COPYING ChangeLog INSTALL NEWS ONEWS README TODO \ - UNCOMPRESSED_GIF doc \ - $PKG/usr/doc/libungif-$VERSION -rm $PKG/usr/doc/libungif-$VERSION/doc/Makefile* + AUTHORS BUGS COPYING DEVELOPERS INSTALL NEWS ONEWS README TODO \ + $PKG/usr/doc/giflib-$VERSION +cp -a doc $PKG/usr/doc/giflib-$VERSION/html +rm $PKG/usr/doc/giflib-$VERSION/html/Makefile* + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -## I don't believe we need all this slop. Correct me if I'm wrong. -# I've been corrected... -#rm -rf $PKG/usr/bin - -( cd $PKG/usr/lib${LIBDIRSUFFIX} - SOVER=$(/bin/ls libungif.so.*.*.* | cut -f 3-5 -d .) - ln -sf libungif.so.$SOVER libgif.so.$SOVER - ln -sf libgif.so.$SOVER libgif.so.4 - ln -sf libgif.so.4 libgif.so - ln -sf libungif.a libgif.a ) - mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -/sbin/makepkg -l y -c n $TMP/libungif-$VERSION-$ARCH-$BUILD.txz - +/sbin/makepkg -l y -c n $TMP/giflib-$VERSION-$ARCH-$BUILD.txz diff --git a/source/l/libungif/slack-desc b/source/l/giflib/slack-desc index 144ee02a9..322b6e418 100644 --- a/source/l/libungif/slack-desc +++ b/source/l/giflib/slack-desc @@ -6,14 +6,14 @@ # leave one space after the ':'. |-----handy-ruler------------------------------------------------------| -libungif: libungif (GIF image format library) -libungif: -libungif: A library to load and save (uncompressed only) images using GIF, -libungif: or Graphics Interchange Format. GIF was introduced by CompuServe -libungif: in 1987, but is still widely used today (especially on web pages.) -libungif: -libungif: -libungif: -libungif: -libungif: -libungif: +giflib: giflib (GIF image format library) +giflib: +giflib: A library to load and save (uncompressed only) images using GIF, +giflib: or Graphics Interchange Format. GIF was introduced by CompuServe +giflib: in 1987, but is still widely used today (especially on web pages.) +giflib: +giflib: +giflib: +giflib: +giflib: +giflib: diff --git a/source/l/glib2/glib-CVE-2008-4316.diff b/source/l/glib2/glib-CVE-2008-4316.diff deleted file mode 100644 index 5d9bddee1..000000000 --- a/source/l/glib2/glib-CVE-2008-4316.diff +++ /dev/null @@ -1,62 +0,0 @@ ---- trunk/glib/gbase64.c 2009/02/23 04:30:06 7897 -+++ trunk/glib/gbase64.c 2009/03/12 13:30:55 7973 -@@ -54,8 +54,9 @@ - * - * The output buffer must be large enough to fit all the data that will - * be written to it. Due to the way base64 encodes you will need -- * at least: @len * 4 / 3 + 6 bytes. If you enable line-breaking you will -- * need at least: @len * 4 / 3 + @len * 4 / (3 * 72) + 7 bytes. -+ * at least: (@len / 3 + 1) * 4 + 4 bytes (+ 4 may be needed in case of -+ * non-zero state). If you enable line-breaking you will need at least: -+ * ((@len / 3 + 1) * 4 + 4) / 72 + 1 bytes of extra space. - * - * @break_lines is typically used when putting base64-encoded data in emails. - * It breaks the lines at 72 columns instead of putting all of the text on -@@ -233,8 +234,14 @@ - g_return_val_if_fail (data != NULL, NULL); - g_return_val_if_fail (len > 0, NULL); - -- /* We can use a smaller limit here, since we know the saved state is 0 */ -- out = g_malloc (len * 4 / 3 + 4); -+ /* We can use a smaller limit here, since we know the saved state is 0, -+ +1 is needed for trailing \0, also check for unlikely integer overflow */ -+ if (len >= ((G_MAXSIZE - 1) / 4 - 1) * 3) -+ g_error("%s: input too large for Base64 encoding (%"G_GSIZE_FORMAT" chars)", -+ G_STRLOC, len); -+ -+ out = g_malloc ((len / 3 + 1) * 4 + 1); -+ - outlen = g_base64_encode_step (data, len, FALSE, out, &state, &save); - outlen += g_base64_encode_close (FALSE, out + outlen, &state, &save); - out[outlen] = '\0'; -@@ -275,7 +282,8 @@ - * - * The output buffer must be large enough to fit all the data that will - * be written to it. Since base64 encodes 3 bytes in 4 chars you need -- * at least: @len * 3 / 4 bytes. -+ * at least: (@len / 4) * 3 + 3 bytes (+ 3 may be needed in case of non-zero -+ * state). - * - * Return value: The number of bytes of output that was written - * -@@ -358,7 +366,8 @@ - gsize *out_len) - { - guchar *ret; -- gint input_length, state = 0; -+ gsize input_length; -+ gint state = 0; - guint save = 0; - - g_return_val_if_fail (text != NULL, NULL); -@@ -368,7 +377,9 @@ - - g_return_val_if_fail (input_length > 1, NULL); - -- ret = g_malloc0 (input_length * 3 / 4); -+ /* We can use a smaller limit here, since we know the saved state is 0, -+ +1 used to avoid calling g_malloc0(0), and hence retruning NULL */ -+ ret = g_malloc0 ((input_length / 4) * 3 + 1); - - *out_len = g_base64_decode_step (text, input_length, ret, &state, &save); - diff --git a/source/l/glib2/glib2.SlackBuild b/source/l/glib2/glib2.SlackBuild index 23211af80..b662e37f3 100755 --- a/source/l/glib2/glib2.SlackBuild +++ b/source/l/glib2/glib2.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,17 +21,24 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=${VERSION:-2.18.4} -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-$(echo glib-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:-" -j7 "} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-glib2 -rm -rf $PKG -mkdir -p $TMP $PKG/usr if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -42,15 +49,18 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi +rm -rf $PKG +mkdir -p $TMP $PKG/usr cd $TMP rm -rf glib-$VERSION -tar xvf $CWD/glib-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/glib-$VERSION.tar.?z* || exit 1 cd glib-$VERSION -zcat $CWD/glib-CVE-2008-4316.diff.gz | patch -p1 --verbose || exit 1 - chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -91,6 +101,14 @@ cp -a \ $PKG/usr/doc/glib-$VERSION ( cd $PKG/usr/doc/glib-$VERSION ; ln -s /usr/share/gtk-doc/html/gobject html ) +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh diff --git a/source/l/glibc/doinst.sh-glibc b/source/l/glibc/doinst.sh-glibc index e85810f7a..ffc066e80 100644 --- a/source/l/glibc/doinst.sh-glibc +++ b/source/l/glibc/doinst.sh-glibc @@ -110,45 +110,44 @@ rm -f etc/profile.d/glibc.sh.new # In case there's no ldconfig, make the links manually: if [ ! -x /sbin/ldconfig ]; then -# linuxthreads: ( cd lib ; rm -rf libnss_nis.so.2 ) -( cd lib ; ln -sf libnss_nis-2.9.so libnss_nis.so.2 ) +( cd lib ; ln -sf libnss_nis-2.11.1.so libnss_nis.so.2 ) ( cd lib ; rm -rf libm.so.6 ) -( cd lib ; ln -sf libm-2.9.so libm.so.6 ) +( cd lib ; ln -sf libm-2.11.1.so libm.so.6 ) ( cd lib ; rm -rf libnss_files.so.2 ) -( cd lib ; ln -sf libnss_files-2.9.so libnss_files.so.2 ) +( cd lib ; ln -sf libnss_files-2.11.1.so libnss_files.so.2 ) ( cd lib ; rm -rf libresolv.so.2 ) -( cd lib ; ln -sf libresolv-2.9.so libresolv.so.2 ) +( cd lib ; ln -sf libresolv-2.11.1.so libresolv.so.2 ) ( cd lib ; rm -rf libnsl.so.1 ) -( cd lib ; ln -sf libnsl-2.9.so libnsl.so.1 ) +( cd lib ; ln -sf libnsl-2.11.1.so libnsl.so.1 ) ( cd lib ; rm -rf libutil.so.1 ) -( cd lib ; ln -sf libutil-2.9.so libutil.so.1 ) +( cd lib ; ln -sf libutil-2.11.1.so libutil.so.1 ) ( cd lib ; rm -rf libnss_compat.so.2 ) -( cd lib ; ln -sf libnss_compat-2.9.so libnss_compat.so.2 ) +( cd lib ; ln -sf libnss_compat-2.11.1.so libnss_compat.so.2 ) ( cd lib ; rm -rf libthread_db.so.1 ) ( cd lib ; ln -sf libthread_db-1.0.so libthread_db.so.1 ) ( cd lib ; rm -rf libnss_hesiod.so.2 ) -( cd lib ; ln -sf libnss_hesiod-2.9.so libnss_hesiod.so.2 ) +( cd lib ; ln -sf libnss_hesiod-2.11.1.so libnss_hesiod.so.2 ) ( cd lib ; rm -rf libanl.so.1 ) -( cd lib ; ln -sf libanl-2.9.so libanl.so.1 ) +( cd lib ; ln -sf libanl-2.11.1.so libanl.so.1 ) ( cd lib ; rm -rf libcrypt.so.1 ) -( cd lib ; ln -sf libcrypt-2.9.so libcrypt.so.1 ) +( cd lib ; ln -sf libcrypt-2.11.1.so libcrypt.so.1 ) ( cd lib ; rm -rf libBrokenLocale.so.1 ) -( cd lib ; ln -sf libBrokenLocale-2.9.so libBrokenLocale.so.1 ) +( cd lib ; ln -sf libBrokenLocale-2.11.1.so libBrokenLocale.so.1 ) ( cd lib ; rm -rf ld-linux.so.2 ) -( cd lib ; ln -sf ld-2.9.so ld-linux.so.2 ) +( cd lib ; ln -sf ld-2.11.1.so ld-linux.so.2 ) ( cd lib ; rm -rf libdl.so.2 ) -( cd lib ; ln -sf libdl-2.9.so libdl.so.2 ) +( cd lib ; ln -sf libdl-2.11.1.so libdl.so.2 ) ( cd lib ; rm -rf libnss_dns.so.2 ) -( cd lib ; ln -sf libnss_dns-2.9.so libnss_dns.so.2 ) +( cd lib ; ln -sf libnss_dns-2.11.1.so libnss_dns.so.2 ) ( cd lib ; rm -rf libpthread.so.0 ) -( cd lib ; ln -sf libpthread-2.9.so libpthread.so.0 ) +( cd lib ; ln -sf libpthread-2.11.1.so libpthread.so.0 ) ( cd lib ; rm -rf libnss_nisplus.so.2 ) -( cd lib ; ln -sf libnss_nisplus-2.9.so libnss_nisplus.so.2 ) +( cd lib ; ln -sf libnss_nisplus-2.11.1.so libnss_nisplus.so.2 ) ( cd lib ; rm -rf libc.so.6 ) -( cd lib ; ln -sf libc-2.9.so libc.so.6 ) +( cd lib ; ln -sf libc-2.11.1.so libc.so.6 ) ( cd lib ; rm -rf librt.so.1 ) -( cd lib ; ln -sf librt-2.9.so librt.so.1 ) +( cd lib ; ln -sf librt-2.11.1.so librt.so.1 ) fi # More links: diff --git a/source/l/glibc/doinst.sh-glibc-solibs b/source/l/glibc/doinst.sh-glibc-solibs index bfc7ad85c..a186da99c 100644 --- a/source/l/glibc/doinst.sh-glibc-solibs +++ b/source/l/glibc/doinst.sh-glibc-solibs @@ -90,43 +90,42 @@ rm -f etc/profile.d/glibc.sh.new # In case there's no ldconfig, make the links manually: if [ ! -x /sbin/ldconfig ]; then -# linuxthreads: ( cd lib ; rm -rf libnss_nis.so.2 ) -( cd lib ; ln -sf libnss_nis-2.9.so libnss_nis.so.2 ) +( cd lib ; ln -sf libnss_nis-2.11.1.so libnss_nis.so.2 ) ( cd lib ; rm -rf libm.so.6 ) -( cd lib ; ln -sf libm-2.9.so libm.so.6 ) +( cd lib ; ln -sf libm-2.11.1.so libm.so.6 ) ( cd lib ; rm -rf libnss_files.so.2 ) -( cd lib ; ln -sf libnss_files-2.9.so libnss_files.so.2 ) +( cd lib ; ln -sf libnss_files-2.11.1.so libnss_files.so.2 ) ( cd lib ; rm -rf libresolv.so.2 ) -( cd lib ; ln -sf libresolv-2.9.so libresolv.so.2 ) +( cd lib ; ln -sf libresolv-2.11.1.so libresolv.so.2 ) ( cd lib ; rm -rf libnsl.so.1 ) -( cd lib ; ln -sf libnsl-2.9.so libnsl.so.1 ) +( cd lib ; ln -sf libnsl-2.11.1.so libnsl.so.1 ) ( cd lib ; rm -rf libutil.so.1 ) -( cd lib ; ln -sf libutil-2.9.so libutil.so.1 ) +( cd lib ; ln -sf libutil-2.11.1.so libutil.so.1 ) ( cd lib ; rm -rf libnss_compat.so.2 ) -( cd lib ; ln -sf libnss_compat-2.9.so libnss_compat.so.2 ) +( cd lib ; ln -sf libnss_compat-2.11.1.so libnss_compat.so.2 ) ( cd lib ; rm -rf libthread_db.so.1 ) ( cd lib ; ln -sf libthread_db-1.0.so libthread_db.so.1 ) ( cd lib ; rm -rf libnss_hesiod.so.2 ) -( cd lib ; ln -sf libnss_hesiod-2.9.so libnss_hesiod.so.2 ) +( cd lib ; ln -sf libnss_hesiod-2.11.1.so libnss_hesiod.so.2 ) ( cd lib ; rm -rf libanl.so.1 ) -( cd lib ; ln -sf libanl-2.9.so libanl.so.1 ) +( cd lib ; ln -sf libanl-2.11.1.so libanl.so.1 ) ( cd lib ; rm -rf libcrypt.so.1 ) -( cd lib ; ln -sf libcrypt-2.9.so libcrypt.so.1 ) +( cd lib ; ln -sf libcrypt-2.11.1.so libcrypt.so.1 ) ( cd lib ; rm -rf libBrokenLocale.so.1 ) -( cd lib ; ln -sf libBrokenLocale-2.9.so libBrokenLocale.so.1 ) +( cd lib ; ln -sf libBrokenLocale-2.11.1.so libBrokenLocale.so.1 ) ( cd lib ; rm -rf ld-linux.so.2 ) -( cd lib ; ln -sf ld-2.9.so ld-linux.so.2 ) +( cd lib ; ln -sf ld-2.11.1.so ld-linux.so.2 ) ( cd lib ; rm -rf libdl.so.2 ) -( cd lib ; ln -sf libdl-2.9.so libdl.so.2 ) +( cd lib ; ln -sf libdl-2.11.1.so libdl.so.2 ) ( cd lib ; rm -rf libnss_dns.so.2 ) -( cd lib ; ln -sf libnss_dns-2.9.so libnss_dns.so.2 ) +( cd lib ; ln -sf libnss_dns-2.11.1.so libnss_dns.so.2 ) ( cd lib ; rm -rf libpthread.so.0 ) -( cd lib ; ln -sf libpthread-2.9.so libpthread.so.0 ) +( cd lib ; ln -sf libpthread-2.11.1.so libpthread.so.0 ) ( cd lib ; rm -rf libnss_nisplus.so.2 ) -( cd lib ; ln -sf libnss_nisplus-2.9.so libnss_nisplus.so.2 ) +( cd lib ; ln -sf libnss_nisplus-2.11.1.so libnss_nisplus.so.2 ) ( cd lib ; rm -rf libc.so.6 ) -( cd lib ; ln -sf libc-2.9.so libc.so.6 ) +( cd lib ; ln -sf libc-2.11.1.so libc.so.6 ) ( cd lib ; rm -rf librt.so.1 ) -( cd lib ; ln -sf librt-2.9.so librt.so.1 ) +( cd lib ; ln -sf librt-2.11.1.so librt.so.1 ) fi diff --git a/source/l/glibc/glibc.SlackBuild b/source/l/glibc/glibc.SlackBuild index bf49bdce5..c00d790ef 100755 --- a/source/l/glibc/glibc.SlackBuild +++ b/source/l/glibc/glibc.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2006, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,14 +22,25 @@ ## build glibc-$VERSION for Slackware - -VERSION=${VERSION:-2.9} -CHECKOUT=${CHECKOUT:--20090316} +VERSION=${VERSION:-2.11.1} +CHECKOUT=${CHECKOUT:-""} BUILD=${BUILD:-3} + +## Included in glibc now: +## glibc-libidn version +#LIBIDNVER=2.10.1 + # $ARCH may be preset, otherwise i486 compatibility with i686 binary # structuring is the Slackware default, since this is what gcc-3.2+ # requires for binary compatibility with previous releases. -ARCH=${ARCH:-x86_64} +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi CVSVER=${VERSION}${CHECKOUT} @@ -44,6 +55,8 @@ CWD=$(pwd) TMP=${TMP:-/glibc-tmp-$(mcookie)} mkdir -p $TMP +NUMJOBS=${NUMJOBS:--j4} + # Sanity check on the version number in the install scripts: if ! grep -vq libutil-$VERSION}.so $CWD/doinst.sh-glibc ; then echo "FATAL: doinst.sh scripts have wrong version numbers." @@ -101,14 +114,14 @@ apply_patches() { zcat $CWD/glibc.revert.to.fix.build.breakages.diff.gz | patch -p1 --verbose || exit 1 # Update the timezone information. ( cd timezone - tar xzf $CWD/tzdata2009d.tar.gz + tar xzf $CWD/tzdata?????.tar.gz chown root:root * mv yearistype.sh yearistype chmod 644 * chmod 755 yearistype mkdir tzcode cd tzcode - tar xzf $CWD/tzcode2009d.tar.gz + tar xzf $CWD/tzcode?????.tar.gz chown -R root:root . chmod 644 * cp -a *.c *.h .. @@ -187,9 +200,14 @@ mkdir -p $PKG/var/run/nscd # Begin extract/compile: cd $TMP rm -rf glibc-$CVSVER -tar xjvf $CWD/glibc-$CVSVER.tar.bz2 +tar xvf $CWD/glibc-$CVSVER.tar.xz \ + || tar xvf $CWD/glibc-$CVSVER.tar.bz2 \ + || tar xvf $CWD/glibc-$CVSVER.tar.gz cd glibc-$CVSVER +#tar xvf $CWD/glibc-libidn-$LIBIDNVER.tar.?z* +#mv glibc-libidn-$LIBIDNVER libidn + chown -R root:root . find . -perm 666 -exec chmod 644 {} \; find . -perm 664 -exec chmod 644 {} \; @@ -232,7 +250,7 @@ CFLAGS="-g $OPTIMIZ" \ --without-cvs \ $TARGET-slackware-linux -make -j4 || exit 1 +make $NUMJOBS || make || exit 1 make install install_root=$PKG || exit 1 make localedata/install-locales install_root=$PKG || exit 1 @@ -442,7 +460,7 @@ fix_doinst mv incoming/libSegFault.so . ) # Build the package: -makepkg -l y -c n $TMP/glibc-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/glibc-$VERSION-$ARCH-$BUILD.txz # Done! echo diff --git a/source/l/gmime/gmime.SlackBuild b/source/l/gmime/gmime.SlackBuild index 6f3d0f111..b7d6bb7ca 100755 --- a/source/l/gmime/gmime.SlackBuild +++ b/source/l/gmime/gmime.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2006, 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006, 2007, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,11 +22,19 @@ PKGNAM=gmime -VERSION=${VERSION:-2.2.23} -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | cut -d - -f 2 | rev | cut -f 3- -d . | rev)} NUMJOBS=${NUMJOBS:-" -j7 "} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi CWD=$(pwd) TMP=${TMP:-/tmp} @@ -43,11 +51,14 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi cd $TMP rm -rf ${PKGNAM}-${VERSION} -tar xvf $CWD/${PKGNAM}-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1 cd ${PKGNAM}-$VERSION # Make sure ownerships and permissions are sane: @@ -66,6 +77,7 @@ CFLAGS="$SLKCFLAGS" \ --localstatedir=/var/lib \ --sysconfdir=/etc \ --mandir=/usr/man \ + --disable-static \ --program-prefix= \ --program-suffix= \ --build=$ARCH-slackware-linux @@ -108,7 +120,6 @@ cp -a \ $PKG/usr/doc/${PKGNAM}-$VERSION mkdir -p $PKG/install -#zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG diff --git a/source/l/gmp/gmp.SlackBuild b/source/l/gmp/gmp.SlackBuild index 147cabe35..8fd35296d 100755 --- a/source/l/gmp/gmp.SlackBuild +++ b/source/l/gmp/gmp.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,10 +21,19 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=4.2.4 -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-$(echo gmp-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + NUMJOBS=${NUMJOBS:-" -j7 "} CWD=$(pwd) @@ -46,7 +55,7 @@ fi cd $TMP rm -rf gmp-$VERSION -tar xvf $CWD/gmp-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/gmp-$VERSION.tar.?z* || exit 1 cd gmp-$VERSION chown -R root:root . find . \ @@ -59,6 +68,7 @@ CFLAGS="$SLKCFLAGS" \ ./configure \ --prefix=/usr \ --libdir=/usr/lib${LIBDIRSUFFIX} \ + --infodir=/usr/info \ --with-gnu-ld \ --enable-cxx \ --enable-mpbsd \ @@ -76,9 +86,17 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ mkdir -p $PKG/usr/doc/gmp-$VERSION cp -a \ - AUTHORS COPYING COPYING.LIB NEWS README \ + AUTHORS COPYING* NEWS README \ $PKG/usr/doc/gmp-$VERSION +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/l/gnome-icon-theme/gnome-icon-theme.SlackBuild b/source/l/gnome-icon-theme/gnome-icon-theme.SlackBuild index d8855c64f..c9a76aa41 100755 --- a/source/l/gnome-icon-theme/gnome-icon-theme.SlackBuild +++ b/source/l/gnome-icon-theme/gnome-icon-theme.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,11 +21,21 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=2.26.0 -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} +VERSION=${VERSION:-$(echo gnome-icon-theme-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +NUMJOBS=${NUMJOBS:-" -j7 "} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "$ARCH" = "x86_64" ]; then LIBDIRSUFFIX="64" else @@ -67,6 +77,14 @@ cp -a \ AUTHORS COPYING NEWS README TODO \ $PKG/usr/doc/gnome-icon-theme-$VERSION +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh diff --git a/source/l/gnome-icon-theme/gnome-icon-theme.pkgconfig.path.diff b/source/l/gnome-icon-theme/gnome-icon-theme.pkgconfig.path.diff index 0b93f2cf7..f8f0b2692 100644 --- a/source/l/gnome-icon-theme/gnome-icon-theme.pkgconfig.path.diff +++ b/source/l/gnome-icon-theme/gnome-icon-theme.pkgconfig.path.diff @@ -1,12 +1,12 @@ -diff -Nur gnome-icon-theme-2.20.0.orig/Makefile.in gnome-icon-theme-2.20.0/Makefile.in ---- gnome-icon-theme-2.20.0.orig/Makefile.in 2007-09-17 15:07:53.000000000 -0500 -+++ gnome-icon-theme-2.20.0/Makefile.in 2008-02-09 19:56:18.425736840 -0600 -@@ -218,7 +218,7 @@ - top_builddir = @top_builddir@ - top_srcdir = @top_srcdir@ - SUBDIRS = 8x8 16x16 22x22 24x24 32x32 48x48 scalable po +diff -Nur gnome-icon-theme-2.30.2.orig//Makefile.in gnome-icon-theme-2.30.2/Makefile.in +--- gnome-icon-theme-2.30.2.orig//Makefile.in 2010-04-27 09:09:59.000000000 -0500 ++++ gnome-icon-theme-2.30.2/Makefile.in 2010-04-28 10:21:56.050022564 -0500 +@@ -231,7 +231,7 @@ + theme_in_files = index.theme.in.in + theme_DATA = $(theme_in_files:.theme.in.in=.theme) + THEME_DIRS = $(shell SIZES="$(render_sizes)"; for size in $$SIZES; do for dir in `find $(srcdir)/$(SVGOUTDIR)/$$size/* -type d`; do printf "$$dir,"; done; done | sed -e "s/,$$//g") -pkgconfigdir = $(datadir)/pkgconfig +pkgconfigdir = $(libdir)/pkgconfig pkgconfig_DATA = gnome-icon-theme.pc - THEME_IN_FILES = index.theme.in - theme_DATA = index.theme + EXTRA_DIST = \ + gnome-icon-theme.pc.in \ diff --git a/source/l/gst-plugins-base/gst-plugins-base.SlackBuild b/source/l/gst-plugins-base/gst-plugins-base.SlackBuild index ccb118726..e6e3c84cc 100755 --- a/source/l/gst-plugins-base/gst-plugins-base.SlackBuild +++ b/source/l/gst-plugins-base/gst-plugins-base.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh # Copyright 2008 Michiel van Wessem <michiel@slackbuilds.org> -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use in source and binary forms, with or without @@ -24,15 +24,25 @@ # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -PRGNAM=gst-plugins-base -VERSION=0.10.23 -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} +PKGNAM=gst-plugins-base +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +NUMJOBS=${NUMJOBS:-" -j7 "} + CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-$PRGNAM +PKG=$TMP/package-$PKGNAM if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -46,14 +56,17 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG mkdir -p $TMP $PKG cd $TMP -rm -rf $PRGNAM-$VERSION -tar xvf $CWD/$PRGNAM-$VERSION.tar.?z* || exit 1 -cd $PRGNAM-$VERSION +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1 +cd $PKGNAM-$VERSION chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -84,14 +97,22 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ for i in $(find . -type l) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done ) -mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION cp -a \ ABOUT-NLS AUTHORS COPYING* INSTALL NEWS README* RELEASE REQUIREMENTS \ - $PKG/usr/doc/$PRGNAM-$VERSION + $PKG/usr/doc/$PKGNAM-$VERSION + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/l/gst-plugins-good/gst-plugins-good.SlackBuild b/source/l/gst-plugins-good/gst-plugins-good.SlackBuild new file mode 100755 index 000000000..a5db6d876 --- /dev/null +++ b/source/l/gst-plugins-good/gst-plugins-good.SlackBuild @@ -0,0 +1,129 @@ +#!/bin/sh + +# Copyright 2008 Michiel van Wessem <michiel@slackbuilds.org> +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions are +# met: +# +# * Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + +PKGNAM=gst-plugins-good +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +NUMJOBS=${NUMJOBS:-" -j7 "} + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-$PKGNAM + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "i686" ]; then + SLKCFLAGS="-O2 -march=i686 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "s390" ]; then + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + +rm -rf $PKG +mkdir -p $TMP $PKG +cd $TMP +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1 +cd $PKGNAM-$VERSION + +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +CFLAGS="$SLKCFLAGS" \ +CXXFLAGS="$SLKCFLAGS" \ +./configure \ + --prefix=/usr \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --sysconfdir=/etc \ + --localstatedir=/var \ + --mandir=/usr/man \ + --disable-debug \ + --disable-static \ + --build=$ARCH-slackware-linux + +make $NUMJOBS || make || exit 1 +make install DESTDIR=$PKG || exit 1 + +find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ + | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + +# Compress and if needed symlink the man pages: +if [ -d $PKG/usr/man ]; then + ( cd $PKG/usr/man + for manpagedir in $(find . -type d -name "man*") ; do + ( cd $manpagedir + for eachpage in $( find . -type l -maxdepth 1) ; do + ln -s $( readlink $eachpage ).gz $eachpage.gz + rm $eachpage + done + gzip -9 *.? + ) + done + ) +fi + +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION +cp -a \ + ABOUT-NLS AUTHORS COPYING* INSTALL NEWS README* RELEASE REQUIREMENTS \ + $PKG/usr/doc/$PKGNAM-$VERSION + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc + +cd $PKG +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz + diff --git a/source/l/gst-plugins-good/slack-desc b/source/l/gst-plugins-good/slack-desc new file mode 100644 index 000000000..7738d275b --- /dev/null +++ b/source/l/gst-plugins-good/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler---------------------------------------------| +gst-plugins-good: gst-plugins-good (good set of GStreamer plugins) +gst-plugins-good: +gst-plugins-good: GStreamer Good Plug-ins is a set of plug-ins that have good +gst-plugins-good: quality code, correct functionality, and a good license +gst-plugins-good: (LGPL for the plug-in code, LGPL or LGPL-compatible for the +gst-plugins-good: supporting library). +gst-plugins-good: +gst-plugins-good: +gst-plugins-good: +gst-plugins-good: +gst-plugins-good: diff --git a/source/l/gstreamer/gstreamer.SlackBuild b/source/l/gstreamer/gstreamer.SlackBuild index 2fcc04e71..293b90fa0 100755 --- a/source/l/gstreamer/gstreamer.SlackBuild +++ b/source/l/gstreamer/gstreamer.SlackBuild @@ -2,7 +2,7 @@ # Copyright 2008 Robby Workman, Northport, Alabama, USA # Copyright 2008 Michiel van Wessem <michiel@slackbuilds.org> -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -23,12 +23,22 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -PRGNAM=gstreamer -VERSION=0.10.23 -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} +PKGNAM=gstreamer +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +NUMJOBS=${NUMJOBS:-" -j7 "} + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" @@ -41,19 +51,22 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-$PRGNAM +PKG=$TMP/package-$PKGNAM rm -rf $PKG mkdir -p $TMP $PKG cd $TMP -rm -rf $PRGNAM-$VERSION -tar xvf $CWD/$PRGNAM-$VERSION.tar.?z* || exit 1 -cd $PRGNAM-$VERSION +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1 +cd $PKGNAM-$VERSION chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -69,21 +82,21 @@ CXXFLAGS="$SLKCFLAGS" \ --sysconfdir=/etc \ --localstatedir=/var \ --mandir=/usr/man \ - --docdir=/usr/doc/$PRGNAM-$VERSION \ - --with-cachedir=/var/cache/$PRGNAM \ + --docdir=/usr/doc/$PKGNAM-$VERSION \ --disable-static \ --disable-debug \ + --disable-gst-debug \ + --with-package-name='gstreamer' \ + --with-package-origin='http://gstreamer.freedesktop.org' \ --build=$ARCH-slackware-linux # --disable-gst-debug was always used before, but now the option prevents # gstreamer (10.22) from compiling. Check again with future releases. +# Seems fine as of 0.10.26, so it's enabled again -RW make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG || exit 1 -# Create the cache directory -mkdir -p $PKG/var/cache/gstreamer - find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null @@ -92,14 +105,22 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ for i in $(find . -type l) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done ) -mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION cp -a \ ABOUT-NLS AUTHORS COPYING* INSTALL MAINTAINERS NEWS README* RELEASE TODO \ - $PKG/usr/doc/$PRGNAM-$VERSION + $PKG/usr/doc/$PKGNAM-$VERSION + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/l/gtk+2/gtk+2.SlackBuild b/source/l/gtk+2/gtk+2.SlackBuild index 0c4e043a7..f60d0a555 100755 --- a/source/l/gtk+2/gtk+2.SlackBuild +++ b/source/l/gtk+2/gtk+2.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,12 +21,21 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=2.14.7 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-4} +VERSION=${VERSION:-$(echo gtk+-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:-" -j7 "} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-gtk2 @@ -40,32 +49,18 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG mkdir -p $TMP $PKG/usr cd $TMP rm -rf gtk+-$VERSION -tar xvf $CWD/gtk+-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/gtk+-$VERSION.tar.?z* || exit 1 cd gtk+-$VERSION -# There's been this long standing debate about PNG and -lz -# and this patch is the workaround. ;-) -zcat $CWD/gtk.pnglz.diff.gz | patch -p1 --verbose || exit 1 -# Fix Flash in Konquoror: -zcat $CWD/gtk.nsplugin.diff.gz | patch -p1 --verbose || exit 1 - -## Fix for x86_64 (does not hurt the other archs but note that we will start -## using /etc/gtk-2.0/$host instead of /etc/gtk-2.0/ now): - sed -i "s/GTK_SYSCONFDIR, \\\"gtk-2\\.0\\\"/GTK_SYSCONFDIR, \\\"gtk-2\\.0\\\", HOST/g" ./gtk/gtkrc.c ./gdk-pixbuf/gdk-pixbuf-io.c - sed -i 's/sysconfdir)\\"/& \\\n\t-DHOST=\\\"$(host_triplet)\\\"/g' \ - gdk-pixbuf/Makefile.am \ - gtk/Makefile.am \ - modules/input/Makefile.am - -# The original config.{guess,sub} do not work on x86_64 -cp -p /usr/share/libtool/config.{guess,sub} . - chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -73,6 +68,25 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; +# There's been this long standing debate about PNG and -lz +# and this patch is the workaround. ;-) +zcat $CWD/gtk.pnglz.diff.gz | patch -p1 --verbose || exit 1 + +# Do not flood the console or .xsession-errors with "trouble ahead" +# warnings (most noticable when using Firefox and Flash): +zcat $CWD/gtk.xid.nowarningflood.diff.gz | patch -p1 --verbose || exit 1 + +# Use /etc/gtk-2.0/$ARCH-slackware-linux instead of /etc/gtk-2.0/ +sed -i "s/GTK_SYSCONFDIR, \\\"gtk-2\\.0\\\"/GTK_SYSCONFDIR, \\\"gtk-2\\.0\\\", HOST/g" ./gtk/gtkrc.c ./gdk-pixbuf/gdk-pixbuf-io.c +sed -i 's/sysconfdir)\\"/& \\\n\t-DHOST=\\\"$(host_triplet)\\\"/g' \ +gdk-pixbuf/Makefile.am \ +gtk/Makefile.am \ +modules/input/Makefile.am + +# Use libpng-1.4.x: +zcat $CWD/gtk.png14.diff.gz | patch -p1 --verbose || exit 1 + +# Regenerate ./configure: libtoolize --force autoreconf -vif @@ -80,7 +94,7 @@ autoreconf -vif # Our host is $ARCH-slackware-linux not $ARCH-slackware-linux-gnu: sed -i -e 's#linux|linux-gnu|#linux|linux|#' config.sub -CFLAGS="$SLKCFLAGS" \ +CFLAGS="$SLKCFLAGS -DHOST='"'"${ARCH}-slackware-linux"'"'" \ ./configure \ --prefix=/usr \ --libdir=/usr/lib${LIBDIRSUFFIX} \ @@ -167,6 +181,14 @@ cp -a \ ln -s /usr/share/gtk-doc/html/gtk . ) +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + # I'm almost inclined to think this stuff is obsolete but I don't know for sure. # I do know that leaving it in doesn't hurt (aside from a few wasted bytes, but # probably less than the comments here waste ;-) diff --git a/source/l/gtk+2/gtk.nsplugin.diff b/source/l/gtk+2/gtk.nsplugin.diff deleted file mode 100644 index 3e0932dec..000000000 --- a/source/l/gtk+2/gtk.nsplugin.diff +++ /dev/null @@ -1,11 +0,0 @@ -diff -Nur gtk+-2.14.6.orig/gtk/gtkclipboard.c gtk+-2.14.6/gtk/gtkclipboard.c ---- gtk+-2.14.6.orig/gtk/gtkclipboard.c 2008-12-15 12:38:44.000000000 -0600 -+++ gtk+-2.14.6/gtk/gtkclipboard.c 2008-12-16 21:33:21.079854023 -0600 -@@ -299,6 +299,7 @@ - gtk_clipboard_get_for_display (GdkDisplay *display, - GdkAtom selection) - { -+ g_return_val_if_fail (display != NULL, NULL); - g_return_val_if_fail (GDK_IS_DISPLAY (display), NULL); - g_return_val_if_fail (!display->closed, NULL); - diff --git a/source/l/gtk+2/gtk.png14.diff b/source/l/gtk+2/gtk.png14.diff new file mode 100644 index 000000000..20d709e4e --- /dev/null +++ b/source/l/gtk+2/gtk.png14.diff @@ -0,0 +1,19 @@ +--- ./configure.in.orig 2010-01-11 14:57:36.000000000 -0600 ++++ ./configure.in 2010-02-12 00:48:04.000000000 -0600 +@@ -908,12 +908,12 @@ + + dnl Test for libpng + if test x$with_libpng != xno && test -z "$LIBPNG"; then +- AC_MSG_CHECKING(for libpng12) +- if $PKG_CONFIG --exists libpng12 ; then ++ AC_MSG_CHECKING(for libpng14) ++ if $PKG_CONFIG --exists libpng14 ; then + AC_MSG_RESULT(yes) + PNG='png' +- PNG_DEP_CFLAGS_PACKAGES=libpng12 +- LIBPNG=`$PKG_CONFIG --libs libpng12` ++ PNG_DEP_CFLAGS_PACKAGES=libpng14 ++ LIBPNG=`$PKG_CONFIG --libs libpng14` + else + AC_MSG_RESULT(no) + AC_CHECK_LIB(png, png_read_info, diff --git a/source/l/gtk+2/gtk.pnglz.diff b/source/l/gtk+2/gtk.pnglz.diff index 13020c242..1f71bd841 100644 --- a/source/l/gtk+2/gtk.pnglz.diff +++ b/source/l/gtk+2/gtk.pnglz.diff @@ -1,7 +1,7 @@ -diff -Nur gtk+-2.14.6.orig/gdk-pixbuf/Makefile.in gtk+-2.14.6/gdk-pixbuf/Makefile.in ---- gtk+-2.14.6.orig/gdk-pixbuf/Makefile.in 2008-12-15 12:42:35.000000000 -0600 -+++ gtk+-2.14.6/gdk-pixbuf/Makefile.in 2008-12-16 21:36:45.393854353 -0600 -@@ -245,7 +245,7 @@ +diff -Nur gtk+-2.18.4.orig/gdk-pixbuf/Makefile.in gtk+-2.18.4/gdk-pixbuf/Makefile.in +--- gtk+-2.18.4.orig/gdk-pixbuf/Makefile.in 2009-11-30 22:08:44.000000000 -0600 ++++ gtk+-2.18.4/gdk-pixbuf/Makefile.in 2009-12-03 21:57:10.541765261 -0600 +@@ -801,7 +801,7 @@ LIBJASPER = @LIBJASPER@ LIBJPEG = @LIBJPEG@ LIBOBJS = @LIBOBJS@ diff --git a/source/l/gtk+2/gtk.xid.nowarningflood.diff b/source/l/gtk+2/gtk.xid.nowarningflood.diff new file mode 100644 index 000000000..6b8c854d8 --- /dev/null +++ b/source/l/gtk+2/gtk.xid.nowarningflood.diff @@ -0,0 +1,12 @@ +--- ./gdk/x11/gdkxid.c.orig 2009-12-18 20:54:50.000000000 -0600 ++++ ./gdk/x11/gdkxid.c 2010-02-08 14:42:50.000000000 -0600 +@@ -57,9 +57,6 @@ + display_x11->xid_ht = g_hash_table_new ((GHashFunc) gdk_xid_hash, + (GEqualFunc) gdk_xid_equal); + +- if (g_hash_table_lookup (display_x11->xid_ht, xid)) +- g_warning ("XID collision, trouble ahead"); +- + g_hash_table_insert (display_x11->xid_ht, xid, data); + } + diff --git a/source/l/hal-info/hal-info.SlackBuild b/source/l/hal-info/hal-info.SlackBuild index fa61d8bea..5f527f584 100755 --- a/source/l/hal-info/hal-info.SlackBuild +++ b/source/l/hal-info/hal-info.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh -# Copyright 2007, 2008 Robby Workman, Northport, AL, USA -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2007-2010 Robby Workman, Northport, AL, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,21 +22,21 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -PRGNAM=hal-info -VERSION=${VERSION:-20090716} +PKGNAM=hal-info +VERSION=${VERSION:-20091130} ARCH=noarch BUILD=${BUILD:-1} CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-$PRGNAM +PKG=$TMP/package-$PKGNAM rm -rf $PKG mkdir -p $TMP $PKG cd $TMP || exit 1 -rm -rf $PRGNAM-$VERSION -tar xvf $CWD/$PRGNAM-$VERSION.tar.?z* || exit 1 -cd $PRGNAM-$VERSION || exit 1 +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1 +cd $PKGNAM-$VERSION || exit 1 chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -44,6 +44,10 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; +# Apply a couple of patches from git +zcat $CWD/patches/quirk-LG_X110-keyboard.patch.gz | patch -p1 --verbose || exit 1 +zcat $CWD/patches/quirk-acer_aspire_hotkey.patch.gz | patch -p1 --verbose || exit 1 + ./configure \ --prefix=/usr \ --sysconfdir=/etc \ @@ -52,14 +56,14 @@ find . \ make || exit 1 make install DESTDIR=$PKG || exit 1 -mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION cp -a \ AUTHORS COPYING* HACKING INSTALL NEWS README* \ - $PKG/usr/doc/$PRGNAM-$VERSION + $PKG/usr/doc/$PKGNAM-$VERSION mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/l/hal-info/patches/quirk-LG_X110-keyboard.patch b/source/l/hal-info/patches/quirk-LG_X110-keyboard.patch new file mode 100644 index 000000000..330b86999 --- /dev/null +++ b/source/l/hal-info/patches/quirk-LG_X110-keyboard.patch @@ -0,0 +1,46 @@ +commit 1a3c7c28d028c0952404d6d45b58138849c09ff1 +Author: Ozan ÇaÄŸlayan <ozan@pardus.org.tr> +Date: Wed Dec 23 10:13:26 2009 +0200 + + Add keymap quirks for LG X110 + + The patch adds keyboard quirks for LG X110 (An MSI Wind clone) which has + the following DMI informations: + + system.hardware.primary_video.product = 10158 (0x27ae) (int) + system.hardware.primary_video.vendor = 32902 (0x8086) (int) + system.hardware.product = 'X110-L.A7M3F3' (string) + system.hardware.serial = '812MSVJ025279' (string) + system.hardware.uuid = '00000000-0000-0000-0000-002185569235' (string) + system.hardware.vendor = 'LG Electronics' (string) + system.hardware.version = 'Ver.001' (string) + + Signed-off-by: Martin Pitt <martin.pitt@ubuntu.com> + +diff --git a/fdi/information/10freedesktop/30-keymap-misc.fdi b/fdi/information/10freedesktop/30-keymap-misc.fdi +index c4e527e..39d71ed 100644 +--- a/fdi/information/10freedesktop/30-keymap-misc.fdi ++++ b/fdi/information/10freedesktop/30-keymap-misc.fdi +@@ -103,6 +103,22 @@ + </match> + </match> + ++ <match key="/org/freedesktop/Hal/devices/computer:system.hardware.vendor" prefix="LG"> ++ <match key="/org/freedesktop/Hal/devices/computer:system.hardware.product" contains="X110"> ++ <append key="input.keymap.data" type="strlist">e020:mute</append> <!-- Fn-F9 Sound On/Off --> ++ <append key="input.keymap.data" type="strlist">e02e:volumedown</append> <!-- Fn-Left Volume down --> ++ <append key="input.keymap.data" type="strlist">e02f:search</append> <!-- Fn-F3 Search --> ++ <append key="input.keymap.data" type="strlist">e030:volumeup</append> <!-- Fn-Right Volume up --> ++ <append key="input.keymap.data" type="strlist">e031:battery</append> <!-- Fn-F10 Info --> ++ <append key="input.keymap.data" type="strlist">e033:suspend</append> <!-- Fn-F12 Hibernate --> ++ <append key="input.keymap.data" type="strlist">e05f:sleep</append> <!-- Fn-F4 Sleep --> ++ <append key="input.keymap.data" type="strlist">e064:f22</append> <!-- Fn-F5 Touchpad disable --> ++ <append key="input.keymap.data" type="strlist">e076:wlan</append> <!-- Fn-F6 satellite dish1 --> ++ <append key="input.keymap.data" type="strlist">e077:brightnessdown</append> <!-- Fn-Down Brightness down --> ++ <append key="input.keymap.data" type="strlist">e078:brightnessup</append> <!-- Fn-Up Brightness up --> ++ </match> ++ </match> ++ + <match key="/org/freedesktop/Hal/devices/computer:system.hardware.vendor" string="MEDIONNB"> + <match key="/org/freedesktop/Hal/devices/computer:system.hardware.product" prefix="A555"> + <append key="input.keymap.data" type="strlist">63:www</append> <!-- N button --> diff --git a/source/l/hal-info/patches/quirk-acer_aspire_hotkey.patch b/source/l/hal-info/patches/quirk-acer_aspire_hotkey.patch new file mode 100644 index 000000000..390fc7fe8 --- /dev/null +++ b/source/l/hal-info/patches/quirk-acer_aspire_hotkey.patch @@ -0,0 +1,25 @@ +commit 16e1c1921e089a4b53940b6b265fc72446d28254 +Author: Keng-Yu Lin <keng-yu.lin@canonical.com> +Date: Wed Sep 16 15:08:05 2009 +0800 + + Add hotkey quirk for Acer Aspire One (AO531h/AO751h) + + To prevent the brightness adjustment OSD from showing when disabling the bluetooth. + + Signed-off-by: Martin Pitt <martin.pitt@ubuntu.com> + +diff --git a/fdi/information/10freedesktop/30-keymap-acer.fdi b/fdi/information/10freedesktop/30-keymap-acer.fdi +index a2cf8d8..4511bff 100644 +--- a/fdi/information/10freedesktop/30-keymap-acer.fdi ++++ b/fdi/information/10freedesktop/30-keymap-acer.fdi +@@ -61,6 +61,10 @@ + <append key="input.keymap.data" type="strlist">e012:prog2</append> + <append key="input.keymap.data" type="strlist">e059:bluetooth</append> <!-- Bluetooth (toggle) on-to-off --> + </match> ++ <match key="/org/freedesktop/Hal/devices/computer:system.hardware.product" contains_outof="AO751h;AO531h"> ++ <remove key="input.keymap.data" type="strlist">e059:brightnessup</remove> ++ <append key="input.keymap.data" type="strlist">e059:bluetooth</append> <!-- Bluetooth (toggle) on-to-off --> ++ </match> + </match> + </match> + </device> diff --git a/source/l/hal/doinst.sh b/source/l/hal/doinst.sh index ec123d59c..a1c86cf41 100644 --- a/source/l/hal/doinst.sh +++ b/source/l/hal/doinst.sh @@ -1,5 +1,3 @@ -#!/bin/sh - config() { NEW="$1" OLD="$(dirname $NEW)/$(basename $NEW .new)" diff --git a/source/l/hal/hal.SlackBuild b/source/l/hal/hal.SlackBuild index a797b2523..967136868 100755 --- a/source/l/hal/hal.SlackBuild +++ b/source/l/hal/hal.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh # Copyright 2007 Ole Andre Rodlie <olear@slackforge.net> -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,34 +21,46 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -PRGNAM=hal -VERSION=0.5.11 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-6} +PKGNAM=hal +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-2} NUMJOBS=${NUMJOBS:--j7} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-$PRGNAM +PKG=$TMP/package-$PKGNAM if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" -elif [ "$ARCH" = "i686" ]; then - SLKCFLAGS="-O2 -march=i686 -mtune=i686" +elif [ "$ARCH" = "s390" ]; then + SLKCFLAGS="-O2" LIBDIRSUFFIX="" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG mkdir -p $TMP $PKG cd $TMP || exit 1 -rm -rf $PRGNAM-$VERSION -tar xvf $CWD/$PRGNAM-$VERSION.tar.?z* || exit 1 -cd $PRGNAM-$VERSION || exit 1 +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1 +cd $PKGNAM-$VERSION || exit 1 chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -56,43 +68,42 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; -# Restore Xorg's Zap'ing behavior by default and make it -# clearer to the user how to edit and/or get back old behavior -zcat $CWD/patches/10-keymap.fdi-restore_zap.diff.gz | patch -p1 || exit 1 -# Hide some invalid partition types -zcat $CWD/patches/hide_more_invalid_partitions.diff.gz | patch -p1 || exit 1 -# Allow uid/gid options with ntfs-3g filesystems -zcat $CWD/patches/allow_uid_gid_ntfs.diff.gz | patch -p1 || exit 1 -# Check UDI's properly so that we don't cause dbus errors -zcat $CWD/patches/check_udi_properly.diff.gz | patch -p1 || exit 1 -# Prevent crash on newer kernels during resume operations -zcat $CWD/patches/fix_led_crash.diff.gz | patch -p1 || exit 1 -# Fix a crash when assembling md devices -zcat $CWD/patches/fix_md_crash.diff.gz | patch -p1 || exit 1 -# Fix another segfault in mdraid handling -zcat $CWD/patches/fix_segfault_in_mdraid.diff.gz | patch -p1 || exit 1 -# Strip trailing "/" characters from UDI strings to prevent dbus errors -zcat $CWD/patches/fixup_udi_strings.diff.gz | patch -p1 || exit 1 -# Ignore duplicate events (e.g. run udevadm trigger on a running system) -zcat $CWD/patches/ignore_dupe_add_events.diff.gz | patch -p1 || exit 1 -# Use direct hal connection to set the X keymap -zcat $CWD/patches/set_X_keymap_properly.diff.gz | patch -p1 || exit 1 -# Instead of dying, regenerate the fdi cache if it's zero-byte -zcat $CWD/patches/regen_fdi_cache_if_zero_size.diff.gz | patch -p1 || exit 1 -# We need to use "udevadm info" now instead of "udevinfo" -zcat $CWD/patches/use_udevadm_not_udevinfo.patch.gz | patch -p1 || exit 1 +# Restore the DontZap defaults from lore +zcat $CWD/patches/10-keymap.fdi-restore_zap.diff.gz | patch -p1 --verbose || exit 1 + +# Oops, a freebsd-specific commit wasn't :-) +zcat $CWD/patches/fix_libusb_detection.diff.gz | patch -p1 --verbose || exit 1 + +# Fix a segfault -- http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=562068 +zcat $CWD/patches/fix_segfault_in_LIBHAL_FREE_DBUS_ERROR.diff.gz | patch -p1 --verbose || exit 1 +# Increase PATH_HAL_MAX to 4096 to avoid crashes +# https://bugs.freedesktop.org/show_bug.cgi?id=25888 +zcat $CWD/patches/increase_HAL_PATH_MAX_to_4096.diff.gz | patch -p1 --verbose || exit 1 + +# Handle input.touchpad explicitly (needed due to kernel changes) +zcat $CWD/patches/handle_input.touchpad_explicitly.diff.gz | patch -p1 --verbose || exit 1 + +# Fix incorrect arguments to ioperm() +zcat $CWD/patches/fix_ioperm_arguments.patch.gz | patch -p1 --verbose || exit 1 + +# Fix segfaults from not calling dbus_error_init() early enough +zcat $CWD/patches/fix_segfault-dbus_error_init.patch.gz | patch -p1 --verbose || exit 1 + +autoconf CFLAGS="$SLKCFLAGS" \ CXXFLAGS="$SLKCFLAGS" \ ./configure \ --prefix=/usr \ --libdir=/usr/lib${LIBDIRSUFFIX} \ + --libexecdir=/usr/libexec \ --sysconfdir=/etc \ --localstatedir=/var \ --mandir=/usr/man \ + --with-udev-prefix=/lib \ --disable-static \ --enable-docbook-docs \ - --docdir=/usr/doc/$PRGNAM-$VERSION \ + --docdir=/usr/doc/$PKGNAM-$VERSION \ --with-pid-file=/var/run/hald/pid \ --enable-parted \ --disable-policy-kit \ @@ -104,6 +115,10 @@ CXXFLAGS="$SLKCFLAGS" \ || exit 1 # These were merged into the 2.6.22 kernels # --enable-acpi-ibm --enable-acpi-toshiba +# Use these instead of the corresponding --disable lines for PolicyKit support +# --enable-policy-kit \ +# --enable-console-kit \ +# --enable-acl-management \ make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG || exit 1 @@ -116,30 +131,28 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ for i in $(find . -type l) ; do ln -s $(readlink $i).gz $i.gz ; rm $i ; done ) -# Let's put the udev rules in the right place -mkdir -p $PKG/lib -mv $PKG/etc/udev $PKG/lib - # Install init script for hal mkdir -p $PKG/etc/rc.d zcat $CWD/rc.hald.gz > $PKG/etc/rc.d/rc.hald.new # Make HAL run by default: chmod 0755 $PKG/etc/rc.d/rc.hald.new +# /* remove everything between the C-style comments if using PK # Make the HAL access controls suitable for us # Big thanks to Richard Hughes for feedback on this :-) # First, move the one installed by the system to the docs directory -mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION mv $PKG/etc/dbus-1/system.d/hal.conf \ - $PKG/usr/doc/$PRGNAM-$VERSION/hal.conf.orig + $PKG/usr/doc/$PKGNAM-$VERSION/hal.conf.orig +# end removal */ # Don't clobber an existing config file in case custom changes have been made zcat $CWD/hal.conf.gz > $PKG/etc/dbus-1/system.d/hal.conf.new # Install docs (directory was created above) cp -a \ AUTHORS COPYING* HACKING INSTALL NEWS README* \ - $PKG/usr/doc/$PRGNAM-$VERSION -( cd $PKG/usr/doc/$PRGNAM-$VERSION + $PKG/usr/doc/$PKGNAM-$VERSION +( cd $PKG/usr/doc/$PKGNAM-$VERSION ln -s ../../share/gtk-doc/html/libhal libhal ln -s ../../share/gtk-doc/html/libhal-storage libhal-storage ) @@ -149,5 +162,5 @@ cat $CWD/slack-desc > $PKG/install/slack-desc zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh cd $PKG -/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/l/hal/patches/10-keymap.fdi-restore_zap.diff b/source/l/hal/patches/10-keymap.fdi-restore_zap.diff index 5958aae2b..12e21ba79 100644 --- a/source/l/hal/patches/10-keymap.fdi-restore_zap.diff +++ b/source/l/hal/patches/10-keymap.fdi-restore_zap.diff @@ -1,3 +1,8 @@ +We're going to make it clearer to users that they should NOT edit + this file (as installed to /usr/share/hal/fdi/... and also let + them know where to copy it and how to edit that copy for an + alternate keymap and such... --rworkman @ 20091211 + diff -Nur hal-0.5.11.orig/fdi/policy/10osvendor/10-keymap.fdi hal-0.5.11/fdi/policy/10osvendor/10-keymap.fdi --- hal-0.5.11.orig/fdi/policy/10osvendor/10-keymap.fdi 2008-05-07 18:21:16.000000000 -0500 +++ hal-0.5.11/fdi/policy/10osvendor/10-keymap.fdi 2009-07-21 00:06:11.779152226 -0500 diff --git a/source/l/hal/patches/allow_uid_gid_ntfs.diff b/source/l/hal/patches/allow_uid_gid_ntfs.diff deleted file mode 100644 index 0997fff8a..000000000 --- a/source/l/hal/patches/allow_uid_gid_ntfs.diff +++ /dev/null @@ -1,20 +0,0 @@ -Author: Michael Biebl <biebl@debian.org> -Date: Mon Nov 10 13:33:48 2008 +0100 - - allow uid/gid mount option for ntfs - - Allow uid/gid mount option for ntfs, as reported in - http://bugs.debian.org/427109. - -diff -Nur hal-0.5.11.orig/tools/hal-storage-mount.c hal-0.5.11/tools/hal-storage-mount.c ---- hal-0.5.11.orig/tools/hal-storage-mount.c 2008-05-07 18:24:23.000000000 -0500 -+++ hal-0.5.11/tools/hal-storage-mount.c 2009-07-16 16:13:12.544551085 -0500 -@@ -720,6 +720,8 @@ - * (since these doesn't contain uid/gid bits) - */ - if (strcmp (libhal_volume_get_fstype (volume), "vfat") != 0 && -+ strcmp (libhal_volume_get_fstype (volume), "ntfs") != 0 && -+ strcmp (libhal_volume_get_fstype (volume), "ntfs-3g") != 0 && - strcmp (libhal_volume_get_fstype (volume), "iso9660") != 0 && - strcmp (libhal_volume_get_fstype (volume), "hfs") != 0 && - strcmp (libhal_volume_get_fstype (volume), "udf") != 0) { diff --git a/source/l/hal/patches/check_udi_properly.diff b/source/l/hal/patches/check_udi_properly.diff deleted file mode 100644 index cd474abc5..000000000 --- a/source/l/hal/patches/check_udi_properly.diff +++ /dev/null @@ -1,41 +0,0 @@ -Author: Richard Hughes <richard@hughsie.com> -Date: Thu Jan 29 08:33:00 2009 +0000 - - check udi in hal-get-property - - We are not checking if a UDI is valid in hal-get-property - which means getting a horrible DBUS error if the entry - is not a valid DBUS path. - -diff --git a/tools/hal_get_property.c b/tools/hal_get_property.c -index ecaa6ce..d31261a 100644 ---- a/tools/hal_get_property.c -+++ b/tools/hal_get_property.c -@@ -84,6 +84,7 @@ main (int argc, char *argv[]) - dbus_bool_t is_hex = FALSE; - dbus_bool_t is_verbose = FALSE; - dbus_bool_t is_version = FALSE; -+ dbus_bool_t udi_exists; - char *str; - DBusError error; - -@@ -168,6 +169,19 @@ main (int argc, char *argv[]) - return 1; - } - -+ /* check UDI exists */ -+ udi_exists = libhal_device_exists (hal_ctx, udi, &error); -+ if (!udi_exists) { -+ fprintf (stderr, "error: UDI %s does not exist\n", udi); -+ return 1; -+ } -+ if (dbus_error_is_set(&error)) { -+ fprintf (stderr, "error: libhal_device_exists: %s: %s\n", error.name, error.message); -+ LIBHAL_FREE_DBUS_ERROR (&error); -+ return 1; -+ } -+ -+ /* get type */ - type = libhal_device_get_property_type (hal_ctx, udi, key, &error); - if (type == LIBHAL_PROPERTY_TYPE_INVALID) { - fprintf (stderr, "error: libhal_device_get_property_type: %s: %s\n", error.name, error.message); diff --git a/source/l/hal/patches/fix_ioperm_arguments.patch b/source/l/hal/patches/fix_ioperm_arguments.patch new file mode 100644 index 000000000..833e07566 --- /dev/null +++ b/source/l/hal/patches/fix_ioperm_arguments.patch @@ -0,0 +1,40 @@ +commit 597c1ffffd61a15a334ce42f2a569c59f0270bcb +Author: Dmitry Torokhov <dmitry.torokhov@gmail.com> +Date: Thu Feb 25 02:25:18 2010 -0800 + + Fix incorrect arguments to ioperm() call + + The second argument of ioperm() is not the last port to be accessed + but rather length of the port range [port, port + len). + + Signed-off-by: Dmitry Torokhov <dtor@mail.ru> + Signed-off-by: Martin Pitt <martin.pitt@ubuntu.com> + +diff --git a/hald/linux/addons/addon-imac-backlight.c b/hald/linux/addons/addon-imac-backlight.c +index e869192..54e4ea3 100644 +--- a/hald/linux/addons/addon-imac-backlight.c ++++ b/hald/linux/addons/addon-imac-backlight.c +@@ -158,7 +158,8 @@ main (int argc, char **argv) + goto out; + } + +- if (ioperm(0xB2, 0xB3, 1) < 0) ++ /* Allow access to ports 0xB2 and 0xB3 */ ++ if (ioperm(0xB2, 2, 1) < 0) + { + HAL_ERROR (("ioperm failed (you should be root).")); + exit(1); +diff --git a/hald/linux/addons/addon-macbookpro-backlight.c b/hald/linux/addons/addon-macbookpro-backlight.c +index 2a6fef6..c1bbbac 100644 +--- a/hald/linux/addons/addon-macbookpro-backlight.c ++++ b/hald/linux/addons/addon-macbookpro-backlight.c +@@ -507,7 +507,8 @@ main (int argc, char *argv[]) + state = INREG(0x7ae4); + OUTREG(0x7ae4, state); + +- if (ioperm (0x300, 0x304, 1) < 0) { ++ /* Allow access to porta 0x300 through 0x304 */ ++ if (ioperm (0x300, 5, 1) < 0) { + HAL_ERROR (("ioperm failed (you should be root).")); + exit(1); + } diff --git a/source/l/hal/patches/fix_led_crash.diff b/source/l/hal/patches/fix_led_crash.diff deleted file mode 100644 index 3b50bbca4..000000000 --- a/source/l/hal/patches/fix_led_crash.diff +++ /dev/null @@ -1,26 +0,0 @@ -commit aec7c567419a1b8c33be1d08f962eea31a53e317 -Author: Andrey Borzenkov <arvidjaar@mail.ru> -Date: Tue Jul 14 21:34:07 2009 +0200 - - work aroud crash caused by LED device handling - - During suspend led device is removed; during resume it is recreated. - Apparently removing led device cause hald-addon- leds to exit - (thus disconnecting D-Bus connection); and sometimes next "add" event - comes too early, before hald had chance to notice missing addon. - - Adds extra check to hald_singleton_device_added() to ensure we do not - abort on disconnected D-Bus connection. - -diff -Nur hal-0.5.11.orig/hald/hald_dbus.c hal-0.5.11/hald/hald_dbus.c ---- hal-0.5.11.orig/hald/hald_dbus.c 2008-05-07 18:23:29.000000000 -0500 -+++ hal-0.5.11/hald/hald_dbus.c 2009-07-16 16:19:04.629624258 -0500 -@@ -3432,7 +3432,7 @@ - if (dbus_connection_send_with_reply (connection, - message, - &pending_call, -- /*-1*/ 8000)) { -+ /*-1*/ 8000) && pending_call) { - /*HAL_INFO (("connection=%x message=%x", connection, message));*/ - dbus_pending_call_set_notify (pending_call, - reply_from_singleton_device_changed, diff --git a/source/l/hal/patches/fix_libusb_detection.diff b/source/l/hal/patches/fix_libusb_detection.diff new file mode 100644 index 000000000..8a4637d48 --- /dev/null +++ b/source/l/hal/patches/fix_libusb_detection.diff @@ -0,0 +1,65 @@ +commit fce91df8ba7f305c624baf1f06961c040b088ecc +Author: Joe Marcus Clarke <marcus@FreeBSD.org> +Date: Mon Dec 7 19:05:27 2009 -0500 + + Fix libusb detection on Linux + + Adjust the FreeBSD libusb20 code so that it does not interfere with the + Linux libusb detection. + + Reported by: Robby Workman <rw@rlworkman.net> + +diff --git a/configure.in b/configure.in +index a8fda51..8363595 100644 +--- a/configure.in ++++ b/configure.in +@@ -479,9 +479,6 @@ if test "x$with_libpci" != xno ; then + fi + AM_CONDITIONAL([HAVE_LIBPCI], [test "x$USE_LIBPCI" = "xyes"]) + +-USE_LIBUSB20=no +-USE_LIBUSB=no +-LIBUSB20_LIBS="" + AC_ARG_WITH([backend], + AS_HELP_STRING([--with-backend=<name>], + [backend to use (linux/solaris/freebsd/dummy)]), +@@ -510,21 +507,25 @@ AM_CONDITIONAL(HALD_COMPILE_FREEBSD, [test x$HALD_BACKEND = xfreebsd], [Compilin + AM_CONDITIONAL(HALD_COMPILE_SOLARIS, [test x$HALD_BACKEND = xsolaris], [Compiling for Solaris]) + AC_SUBST(HALD_BACKEND) + if test "x$HALD_BACKEND" = "xfreebsd"; then +- AC_CHECK_LIB([usb20], [libusb20_dev_get_info], [USE_LIBUSB20=yes], [USE_LIBUSB20=no]) +-fi +-if test "x$USE_LIBUSB20" = "xno"; then +- AC_CHECK_LIB([usb], [libusb20_dev_get_info], [USE_LIBUSB=yes], [USE_LIBUSB=no]) +-fi +-AM_CONDITIONAL([HAVE_LIBUSB20],[test "x$USE_LIBUSB20" = "xyes"]) +-AM_CONDITIONAL([HAVE_LIBUSB20],[test "x$USE_LIBUSB" = "xyes"]) +-if test "x$USE_LIBUSB20" = "xyes"; then +- AC_DEFINE(HAVE_LIBUSB20, 1, [Set if we need libusb20]) +- LIBUSB20_LIBS="-lusb20" +-elif test "x$USE_LIBUSB" = "xyes"; then +- AC_DEFINE(HAVE_LIBUSB20, 1, [Set if we need libsub20]) +- LIBUSB20_LIBS="-lusb" ++ USE_BSDLIBUSB20=no ++ USE_BSDLIBUSB=no ++ LIBUSB20_LIBS="" ++ AC_CHECK_LIB([usb20], [libusb20_dev_get_info], [USE_BSDLIBUSB20=yes], [USE_BSDLIBUSB20=no]) ++ if test "x$USE_BSDLIBUSB20" = "xno"; then ++ AC_CHECK_LIB([usb], [libusb20_dev_get_info], [USE_BSDLIBUSB=yes], [USE_BSDLIBUSB=no]) ++ fi ++ AM_CONDITIONAL([HAVE_LIBUSB20],[test "x$USE_BSDLIBUSB20" = "xyes" -o "x$USE_BSDLIBUSB" = "xyes"]) ++ if test "x$USE_BSDLIBUSB20" = "xyes"; then ++ AC_DEFINE(HAVE_LIBUSB20, 1, [Set if we need libusb20]) ++ LIBUSB20_LIBS="-lusb20" ++ elif test "x$USE_BSDLIBUSB" = "xyes"; then ++ AC_DEFINE(HAVE_LIBUSB20, 1, [Set if we need libsub20]) ++ LIBUSB20_LIBS="-lusb" ++ fi ++ AC_SUBST(LIBUSB20_LIBS) ++else ++ AM_CONDITIONAL([HAVE_LIBUSB20], [false]) + fi +-AC_SUBST(LIBUSB20_LIBS) + + dnl DBUS API is subject to changes + AC_DEFINE_UNQUOTED(DBUS_API_SUBJECT_TO_CHANGE, [], [DBUS API is subject to change]) diff --git a/source/l/hal/patches/fix_md_crash.diff b/source/l/hal/patches/fix_md_crash.diff deleted file mode 100644 index 8a404c77f..000000000 --- a/source/l/hal/patches/fix_md_crash.diff +++ /dev/null @@ -1,45 +0,0 @@ -Backported from b35bf1fbfc000749010a27f3f35a95ddf6bb0b07 Mon Sep 17 00:00:00 2001 -From: Chris Coulson <chrisccoulson@googlemail.com> -Subject: fix crash when assembling certain MD devices - -Don't assume that the parent of a volume has storage capability; e. g. -if we are an MD partition then this is the case as we were re-parented -to the root computer device object earlier. - -FD#21603 - ---- a/hald/linux/blockdev.c 2008-05-08 01:23:41.000000000 +0200 -+++ b/hald/linux/blockdev.c 2009-06-04 12:48:31.000000000 +0200 -@@ -1392,10 +1392,15 @@ hotplug_event_begin_add_blockdev (const - hal_device_property_set_bool (d, "volume.is_mounted", FALSE); - hal_device_property_set_bool (d, "volume.is_mounted_read_only", FALSE); - hal_device_property_set_bool (d, "volume.linux.is_device_mapper", is_device_mapper); -- hal_device_property_set_bool ( -- d, "volume.is_disc", -- strcmp (hal_device_property_get_string (parent, "storage.drive_type"), "cdrom") == 0); -- -+ /* Don't assume that the parent has storage capability, eg -+ * if we are an MD partition then this is the case as we were -+ * re-parented to the root computer device object earlier. -+ */ -+ if (hal_device_has_property(parent, "storage.drive_type")) { -+ hal_device_property_set_bool (d, "volume.is_disc", strcmp (hal_device_property_get_string (parent, "storage.drive_type"), "cdrom") == 0); -+ } else { -+ hal_device_property_set_bool (d, "volume.is_disc", FALSE); -+ } - - is_physical_partition = TRUE; - if (is_fakevolume || is_device_mapper) -@@ -1404,8 +1409,10 @@ hotplug_event_begin_add_blockdev (const - hal_device_property_set_bool (d, "volume.is_partition", is_physical_partition); - - hal_device_property_set_string (d, "info.category", "volume"); -- if (strcmp(hal_device_property_get_string (parent, "storage.drive_type"), "cdrom") == 0) { -- hal_device_add_capability (d, "volume.disc"); -+ if (hal_device_has_property(parent, "storage.drive_type")) { -+ if (strcmp(hal_device_property_get_string (parent, "storage.drive_type"), "cdrom") == 0) { -+ hal_device_add_capability (d, "volume.disc"); -+ } - } - hal_device_add_capability (d, "volume"); - hal_device_add_capability (d, "block"); diff --git a/source/l/hal/patches/fix_segfault-dbus_error_init.patch b/source/l/hal/patches/fix_segfault-dbus_error_init.patch new file mode 100644 index 000000000..f01eefca0 --- /dev/null +++ b/source/l/hal/patches/fix_segfault-dbus_error_init.patch @@ -0,0 +1,179 @@ +commit baa61a879985d63f549854518ef14efd40e62e8c +Author: Peter Jones <pjones@redhat.com> +Date: Wed Feb 24 11:19:28 2010 -0500 + + Make sure dbus_error_init() is called before LIBHAL_FREE_DBUS_ERROR() + + If dbus_error_init() is not called before LIBHAL_FREE_DBUS_ERROR() is + called on that error, then it is uninitialized and may segfault. This + means that dbus_error_init() must be called before any "goto out" if + "out:" calls LIBHAL_FREE_DBUS_ERROR(). + + Signed-off-by: Martin Pitt <martin.pitt@ubuntu.com> + +diff --git a/hald/linux/probing/probe-hiddev.c b/hald/linux/probing/probe-hiddev.c +index 45d2084..bffc040 100644 +--- a/hald/linux/probing/probe-hiddev.c ++++ b/hald/linux/probing/probe-hiddev.c +@@ -57,11 +57,12 @@ main (int argc, char *argv[]) + /* assume failure */ + ret = 1; + ++ dbus_error_init (&error); ++ + udi = getenv ("UDI"); + if (udi == NULL) + goto out; + +- dbus_error_init (&error); + if ((ctx = libhal_ctx_init_direct (&error)) == NULL) + goto out; + +diff --git a/hald/linux/probing/probe-ieee1394-unit.c b/hald/linux/probing/probe-ieee1394-unit.c +index 70b0f86..aaa92e2 100644 +--- a/hald/linux/probing/probe-ieee1394-unit.c ++++ b/hald/linux/probing/probe-ieee1394-unit.c +@@ -388,6 +388,8 @@ int main (int argc, char *argv[]) + + setup_logger (); + ++ dbus_error_init (&error); ++ + udi = getenv ("UDI"); + if (udi == NULL) + goto out; +@@ -396,7 +398,6 @@ int main (int argc, char *argv[]) + if (ieee1394_udi == NULL) + goto out; + +- dbus_error_init (&error); + if ((ctx = libhal_ctx_init_direct (&error)) == NULL) + goto out; + +diff --git a/hald/linux/probing/probe-net-bluetooth.c b/hald/linux/probing/probe-net-bluetooth.c +index 0b1b912..e911eea 100644 +--- a/hald/linux/probing/probe-net-bluetooth.c ++++ b/hald/linux/probing/probe-net-bluetooth.c +@@ -141,6 +141,8 @@ main (int argc, char *argv[]) + DBusMessage *reply = NULL; + DBusError error; + ++ dbus_error_init (&error); ++ + udi = getenv ("UDI"); + if (udi == NULL) + goto out; +@@ -151,8 +153,6 @@ main (int argc, char *argv[]) + + HAL_INFO (("Investigating '%s'", iface)); + +- dbus_error_init (&error); +- + if ((conn = dbus_bus_get (DBUS_BUS_SYSTEM, &error)) == NULL) + goto out; + +diff --git a/hald/linux/probing/probe-printer.c b/hald/linux/probing/probe-printer.c +index 91ed7bc..7c6d1c6 100644 +--- a/hald/linux/probing/probe-printer.c ++++ b/hald/linux/probing/probe-printer.c +@@ -66,6 +66,8 @@ main (int argc, char *argv[]) + ret = 1; + + setup_logger (); ++ ++ dbus_error_init (&error); + + udi = getenv ("UDI"); + if (udi == NULL) { +@@ -73,7 +75,6 @@ main (int argc, char *argv[]) + goto out; + } + +- dbus_error_init (&error); + if ((ctx = libhal_ctx_init_direct (&error)) == NULL) { + HAL_ERROR (("ctx init failed")); + goto out; +diff --git a/hald/linux/probing/probe-smbios.c b/hald/linux/probing/probe-smbios.c +index 0bc9689..15c0d4f 100644 +--- a/hald/linux/probing/probe-smbios.c ++++ b/hald/linux/probing/probe-smbios.c +@@ -129,6 +129,8 @@ main (int argc, char *argv[]) + ret = 1; + + setup_logger (); ++ ++ dbus_error_init (&error); + + udi = getenv ("UDI"); + if (udi == NULL) { +@@ -136,7 +138,6 @@ main (int argc, char *argv[]) + goto out; + } + +- dbus_error_init (&error); + if ((ctx = libhal_ctx_init_direct (&error)) == NULL) { + HAL_ERROR (("ctx init failed")); + goto out; +diff --git a/hald/linux/probing/probe-storage.c b/hald/linux/probing/probe-storage.c +index 824a82e..dd524ca 100644 +--- a/hald/linux/probing/probe-storage.c ++++ b/hald/linux/probing/probe-storage.c +@@ -109,6 +109,8 @@ main (int argc, char *argv[]) + /* assume failure */ + ret = 1; + ++ dbus_error_init (&error); ++ + if ((udi = getenv ("UDI")) == NULL) + goto out; + if ((device_file = getenv ("HAL_PROP_BLOCK_DEVICE")) == NULL) +@@ -127,7 +129,6 @@ main (int argc, char *argv[]) + else + only_check_for_fs = FALSE; + +- dbus_error_init (&error); + if ((ctx = libhal_ctx_init_direct (&error)) == NULL) + goto out; + +diff --git a/hald/linux/probing/probe-video4linux.c b/hald/linux/probing/probe-video4linux.c +index cf913c0..7bc13e8 100644 +--- a/hald/linux/probing/probe-video4linux.c ++++ b/hald/linux/probing/probe-video4linux.c +@@ -58,6 +58,8 @@ main (int argc, char *argv[]) + + setup_logger (); + ++ dbus_error_init (&error); ++ + device_file = getenv ("HAL_PROP_VIDEO4LINUX_DEVICE"); + if (device_file == NULL) + goto out; +@@ -66,7 +68,6 @@ main (int argc, char *argv[]) + if (udi == NULL) + goto out; + +- dbus_error_init (&error); + ctx = libhal_ctx_init_direct (&error); + if (ctx == NULL) + goto out; +diff --git a/hald/linux/probing/probe-volume.c b/hald/linux/probing/probe-volume.c +index 0de1b91..7268fff 100644 +--- a/hald/linux/probing/probe-volume.c ++++ b/hald/linux/probing/probe-volume.c +@@ -318,6 +318,8 @@ main (int argc, char *argv[]) + /* assume failure */ + ret = 1; + ++ dbus_error_init (&error); ++ + if ((udi = getenv ("UDI")) == NULL) + goto out; + if ((device_file = getenv ("HAL_PROP_BLOCK_DEVICE")) == NULL) +@@ -346,7 +348,6 @@ main (int argc, char *argv[]) + + fsusage = getenv ("HAL_PROP_VOLUME_FSUSAGE"); + +- dbus_error_init (&error); + if ((ctx = libhal_ctx_init_direct (&error)) == NULL) + goto out; + diff --git a/source/l/hal/patches/fix_segfault_in_LIBHAL_FREE_DBUS_ERROR.diff b/source/l/hal/patches/fix_segfault_in_LIBHAL_FREE_DBUS_ERROR.diff new file mode 100644 index 000000000..b5bfdec65 --- /dev/null +++ b/source/l/hal/patches/fix_segfault_in_LIBHAL_FREE_DBUS_ERROR.diff @@ -0,0 +1,51 @@ +commit dcb2829b8eff61463b0869614ddb07b1c86cecaa +Author: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> +Date: Wed Dec 30 12:42:52 2009 +0100 + + linux/probe-input: don't use error prio init + + it may happen in the out: case that LIBHAL_FREE_DBUS_ERROR (&error) is + called before the error structure is initialized via + dbus_error_init (&error). This could lead to a segfault during startup + as seen in dmesg: + + |Intel AES-NI instructions are not detected. + |padlock: VIA PadLock not detected. + |hald-probe-inpu[1793]: segfault at 2 ip 00007f656fb68969 sp 00007fff39eeb950 error 4 in libc-2.10.2.so[7f656faf3000+14a000] + |hald-probe-inpu[1796]: segfault at 2 ip 00007fa2c3293969 sp 00007fffd92a5dd0 error 4 in libc-2.10.2.so[7fa2c321e000+14a000] + |hald-probe-inpu[1797]: segfault at 2 ip 00007f1d08ba2969 sp 00007fff34244e30 error 4 in libc-2.10.2.so[7f1d08b2d000+14a000] + |hald-probe-inpu[1799]: segfault at 2 ip 00007f35c0e3d969 sp 00007fffe5ec7ee0 error 4 in libc-2.10.2.so[7f35c0dc8000+14a000] + |hald-probe-inpu[1800]: segfault at 2 ip 00007f931c556969 sp 00007fffe1825b60 error 4 in libc-2.10.2.so[7f931c4e1000+14a000] + |hald-probe-inpu[1801]: segfault at 2 ip 00007f5156d9a969 sp 00007fff4e620af0 error 4 in libc-2.10.2.so[7f5156d25000+14a000] + |RPC: Registered udp transport module. + |RPC: Registered tcp transport module. + + What I run into seems to be reported as Debian #562068 [0]. This patch + makes the segfault go away on my machine. + + [0] http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=562068 + + Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> + Signed-off-by: Martin Pitt <martin.pitt@ubuntu.com> + + +diff --git a/hald/linux/probing/probe-input.c b/hald/linux/probing/probe-input.c +index 94e9929..cad47d3 100644 +--- a/hald/linux/probing/probe-input.c ++++ b/hald/linux/probing/probe-input.c +@@ -70,6 +70,7 @@ main (int argc, char *argv[]) + fd = -1; + + setup_logger (); ++ dbus_error_init (&error); + + button_type = getenv ("HAL_PROP_BUTTON_TYPE"); + if (button_type == NULL) +@@ -96,7 +97,6 @@ main (int argc, char *argv[]) + if (udi == NULL) + goto out; + +- dbus_error_init (&error); + if ((ctx = libhal_ctx_init_direct (&error)) == NULL) + goto out; + diff --git a/source/l/hal/patches/fix_segfault_in_mdraid.diff b/source/l/hal/patches/fix_segfault_in_mdraid.diff deleted file mode 100644 index 88e5eaf63..000000000 --- a/source/l/hal/patches/fix_segfault_in_mdraid.diff +++ /dev/null @@ -1,36 +0,0 @@ -Author: Martin Poole <mpoole@redhat.com> -Date: Wed Jul 29 14:20:45 2009 +0100 - - Fix a segfault in the mdraid code -- see rh#507782 for more info - - Signed-off-by: Richard Hughes <richard@hughsie.com> - -diff -Nur hal-0.5.11.orig/hald/linux/blockdev.c hal-0.5.11/hald/linux/blockdev.c ---- hal-0.5.11.orig/hald/linux/blockdev.c 2008-05-07 18:23:41.000000000 -0500 -+++ hal-0.5.11/hald/linux/blockdev.c 2009-07-30 16:22:40.624837902 -0500 -@@ -851,7 +851,7 @@ - } - - --void -+ - hotplug_event_begin_add_blockdev (const gchar *sysfs_path, const gchar *device_file, gboolean is_partition, - HalDevice *parent, void *end_token) - { -@@ -865,6 +865,7 @@ - gboolean is_device_mapper; - gboolean is_md_device; - int md_number; -+ char tc; - - is_device_mapper = FALSE; - is_fakevolume = FALSE; -@@ -882,7 +883,7 @@ - HAL_INFO (("Handling %s as fakevolume - sysfs_path_real=%s", device_file, sysfs_path_real)); - is_fakevolume = TRUE; - sysfs_path_real = hal_util_get_parent_path (sysfs_path); -- } else if (sscanf (hal_util_get_last_element (sysfs_path), "md%d", &md_number) == 1) { -+ } else if (sscanf (hal_util_get_last_element (sysfs_path), "md%d%c", &md_number, &tc) == 1) { - HAL_INFO (("Handling %s as MD device", device_file)); - is_md_device = TRUE; - sysfs_path_real = g_strdup (sysfs_path); diff --git a/source/l/hal/patches/fixup_udi_strings.diff b/source/l/hal/patches/fixup_udi_strings.diff deleted file mode 100644 index 03549ec1d..000000000 --- a/source/l/hal/patches/fixup_udi_strings.diff +++ /dev/null @@ -1,69 +0,0 @@ -Author: Danny Kukawka <danny.kukawka@web.de> -Date: Mon Oct 13 12:55:48 2008 +0200 - - fix udi: replace '/' in the last part of the udi - - Fixed udi handling. DBus forbids a '/' after the base path - (in case of HAL: '/org/freedesktop/Hal/devices/) of a DBus - path. Replace all not allowed chars in the last part of the - UDI (everything but _a-zA-Z0-9) with a '_'. - - This fixes also fd.o#16040. - -diff --git a/hald/hald.c b/hald/hald.c -index a28d22e..051b33b 100644 ---- a/hald/hald.c -+++ b/hald/hald.c -@@ -265,6 +265,8 @@ hald_compute_udi (gchar *dst, gsize dstsize, const gchar *format, ...) - hal_util_compute_udi_valist (hald_get_gdl (), dst, dstsize, format, args); - va_end (args); - -+ hal_util_validate_udi (dst, dstsize); -+ - if (hal_device_store_find (hald_get_gdl (), dst) == NULL && - hal_device_store_find (hald_get_tdl (), dst) == NULL) - goto out; -diff --git a/hald/util.c b/hald/util.c -index 901e64f..81060e4 100644 ---- a/hald/util.c -+++ b/hald/util.c -@@ -422,6 +422,26 @@ hal_util_compute_udi (HalDeviceStore *store, gchar *dst, gsize dstsize, const gc - va_end (args); - } - -+void -+hal_util_validate_udi (gchar *udi, gsize size) { -+ -+ char end[size]; -+ -+ if (sscanf (udi, "/org/freedesktop/Hal/devices/%s", end) == 1) { -+ if (strstr(end, "/") != NULL) { -+ HAL_DEBUG (("UDI end contains invalid char '/': '%s'", udi)); -+ -+ g_strcanon (end, "_" -+ "abcdefghijklmnopqrstuvwxyz" -+ "ABCDEFGHIJKLMNOPQRSTUVWXYZ" -+ "1234567890", '_'); -+ g_snprintf (udi, size, "/org/freedesktop/Hal/devices/%s", end); -+ -+ HAL_DEBUG (("Fixed UDI, replaced '/', new UDI: %s", udi)); -+ } -+ } -+} -+ - - gboolean - hal_util_path_ascend (gchar *path) -diff --git a/hald/util.h b/hald/util.h -index 510c36c..5377e35 100644 ---- a/hald/util.h -+++ b/hald/util.h -@@ -70,6 +70,8 @@ void hal_util_compute_udi_valist (HalDeviceStore *store, gchar *dst, gsize dstsi - - void hal_util_compute_udi (HalDeviceStore *store, gchar *dst, gsize dstsize, const gchar *format, ...); - -+void hal_util_validate_udi (gchar *udi, gsize size); -+ - gboolean hal_util_path_ascend (gchar *path); - - void hal_util_grep_discard_existing_data (void); diff --git a/source/l/hal/patches/handle_input.touchpad_explicitly.diff b/source/l/hal/patches/handle_input.touchpad_explicitly.diff new file mode 100644 index 000000000..b1231d6de --- /dev/null +++ b/source/l/hal/patches/handle_input.touchpad_explicitly.diff @@ -0,0 +1,75 @@ +commit 6dccf8e3ad181e8f56b1d2a994ec50a1953a1c2d +Author: Michael Witten <mfwitten@gmail.com> +Date: Tue Jan 5 18:53:17 2010 -0600 + + Policy: handle `input.touchpad' explicitly + + This commit essentially duplicates the policy for: + + <match key="info.capabilities" contains="input.mouse"> + + and then changes `input.mouse' to `input.touchpad'. This + is necessary because in Linus Torvalds's Linux repo: + + git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git + + the following commit: + + commit 7105d2ea73e1391b681d0e1212c42f561c64d429 + Author: Dmitry Torokhov <dmitry.torokhov@gmail.com> + Date: Fri Dec 11 23:54:54 2009 -0800 + + Input: ALPS - do not set REL_X/REL_Y capabilities on the touchpad + + Relative events are only reported via secondary device therefore device + associated with the touchpad should not advertise these capabilities. + + Signed-off-by: Dmitry Torokhov <dtor@mail.ru> + + so that HAL no longer adds: + + input.mouse + + to an ALPS touchpad's: + + info.capabilities + + so that HAL no longer marks the ALPS touchpad with: + + input.x11_driver = 'evdev' + + because the policy file: + + fdi/policy/10osvendor/10-x11-input.fdi + + doesn't define the policy for: + + <match key="info.capabilities" contains="input.touchpad"> + + which was previous unnecessary because everything used to + be caught by the policy for: + + <match key="info.capabilities" contains="input.mouse"> + + Signed-off-by: Michael Witten <mfwitten@gmail.com> + Signed-off-by: Martin Pitt <martin.pitt@ubuntu.com> + +diff --git a/fdi/policy/10osvendor/10-x11-input.fdi b/fdi/policy/10osvendor/10-x11-input.fdi +index cff8fc5..8bbe263 100644 +--- a/fdi/policy/10osvendor/10-x11-input.fdi ++++ b/fdi/policy/10osvendor/10-x11-input.fdi +@@ -16,6 +16,14 @@ + </match> + </match> + ++ <match key="info.capabilities" contains="input.touchpad"> ++ <merge key="input.x11_driver" type="string">mouse</merge> ++ <match key="/org/freedesktop/Hal/devices/computer:system.kernel.name" ++ string="Linux"> ++ <merge key="input.x11_driver" type="string">evdev</merge> ++ </match> ++ </match> ++ + <match key="info.capabilities" contains="input.tablet"> + <match key="/org/freedesktop/Hal/devices/computer:system.kernel.name" + string="Linux"> diff --git a/source/l/hal/patches/hide_more_invalid_partitions.diff b/source/l/hal/patches/hide_more_invalid_partitions.diff deleted file mode 100644 index a4437d29a..000000000 --- a/source/l/hal/patches/hide_more_invalid_partitions.diff +++ /dev/null @@ -1,66 +0,0 @@ -Author: Danny Kukawka <danny.kukawka@web.de> -Date: Sat Jul 18 11:18:53 2009 +0200 - - hide more MBR, bootstrap and other partitions from desktop - - Hide more MBR, bootstrap and other partitions from desktop. - Info taken from DeviceKit-disk/udev. - -Author: Frederic Crozat <fcrozat@mandriva.com> -Date: Fri Jul 24 15:11:41 2009 +0200 - - hide Windows recovery partitions on pre-installed Futjisu laptops - - Hide Windows recovery partitions on pre-installed Futjisu laptops. - -diff -Nur hal-0.5.11.orig/fdi/policy/10osvendor/20-storage-methods.fdi hal-0.5.11/fdi/policy/10osvendor/20-storage-methods.fdi ---- hal-0.5.11.orig/fdi/policy/10osvendor/20-storage-methods.fdi 2008-05-07 18:21:16.000000000 -0500 -+++ hal-0.5.11/fdi/policy/10osvendor/20-storage-methods.fdi 2009-07-30 16:16:49.822172103 -0500 -@@ -130,6 +130,10 @@ - <match key="volume.label" string="DellRestore"> - <merge key="volume.ignore" type="bool">true</merge> - </match> -+ <!-- Fujitsu ships laptops with a recovery partitions --> -+ <match key="volume.label" string="WinRE"> -+ <merge key="volume.ignore" type="bool">true</merge> -+ </match> - </match> - - <!-- ASUS ships some desktop with a recovery partition --> -@@ -146,6 +150,11 @@ - <merge key="volume.ignore" type="bool">true</merge> - </match> - </match> -+ <match key="volume.partition.scheme" string="apm"> -+ <match key="volume.partition.type" string_outof="Apple_Bootstrap"> -+ <merge key="volume.ignore" type="bool">true</merge> -+ </match> -+ </match> - - <!-- EFI firmware partitions --> - <match key="volume.fstype" string="vfat"> -@@ -154,6 +163,24 @@ - </match> - </match> - -+ <!-- ignore the following MBR partition types (EFI, hidden, etc.) -+ see http://www.win.tue.nl/~aeb/partitions/partition_types-1.html -+ --> -+ <match key="volume.partition.scheme" string="mbr"> -+ <match key="volume.partition.type" string_outof="0x00;0x11;0x14;0x16;0x17;0x1b;0x1c;0x1e;0x27;0x3d;0x84;0x8d;0x90;0x91;0x92;0x93;0x97;0x98;0x9a;0x9b;0xbb;0xc2;0xc3;0xdd;0xef"> -+ <merge key="volume.ignore" type="bool">true</merge> -+ </match> -+ </match> -+ -+ <!-- special GUID-identified partition types -+ see http://en.wikipedia.org/wiki/GUID_Partition_Table#Partition_type_GUIDs -+ --> -+ <match key="volume.partition.scheme" string="gpt"> -+ <match key="volume.partition.type" string_outof="C12A7328-F81F-11D2-BA4B-00A0C93EC93B;21686148-6449-6E6F-744E-656564454649"> -+ <merge key="volume.ignore" type="bool">true</merge> -+ </match> -+ </match> -+ - <append key="info.interfaces" type="strlist">org.freedesktop.Hal.Device.Volume</append> - - <append key="org.freedesktop.Hal.Device.Volume.method_names" type="strlist">Mount</append> diff --git a/source/l/hal/patches/ignore_dupe_add_events.diff b/source/l/hal/patches/ignore_dupe_add_events.diff deleted file mode 100644 index 0056d8f96..000000000 --- a/source/l/hal/patches/ignore_dupe_add_events.diff +++ /dev/null @@ -1,40 +0,0 @@ -Author: Danny Kukawka <danny.kukawka@web.de> -Date: Wed Mar 18 17:30:53 2009 +0100 - - ignore ADD events if there is already a device with same sysfs_path - - Ignore ADD events if there is already a device with the same - syfs_path available in the GDL or TDL. This should prevent - problems getting duplicated devices from calling 'udevadm trigger' - (fd.o#18861) or from some other rare cases (see: - http://lists.freedesktop.org/archives/hal/2009-February/012954.html). - - TODO: Check if it make sense to call a refresh for the already - existing device instead of ignoring the event completely. - -diff -Nur hal-0.5.11.orig/hald/linux/device.c hal-0.5.11/hald/linux/device.c ---- hal-0.5.11.orig/hald/linux/device.c 2008-05-07 18:23:42.000000000 -0500 -+++ hal-0.5.11/hald/linux/device.c 2009-07-16 16:21:36.619979288 -0500 -@@ -4423,11 +4423,22 @@ - handler = dev_handlers[i]; - if (strcmp (handler->subsystem, subsystem) == 0) { - HalDevice *d; -+ HalDevice *check; - - if (strcmp (subsystem, "scsi") == 0) - if (missing_scsi_host (sysfs_path, (HotplugEvent *)end_token, HOTPLUG_ACTION_ADD)) - goto out; - -+ /* check if there is already a device with this sysfs_path in the system */ -+ if ((check = hal_device_store_match_key_value_string (hald_get_gdl (), "linux.sysfs_path", sysfs_path)) != NULL || -+ (check = hal_device_store_match_key_value_string (hald_get_tdl (), "linux.sysfs_path", sysfs_path)) != NULL) { -+ HAL_WARNING(("Have already a device with sysfs_path='%s' and udi='%s'. Ignore new add event for now.", -+ sysfs_path, hal_device_get_udi(check))); -+ /* maybe we should do a refresh on the found device ??? */ -+ hotplug_event_end (end_token); -+ goto out; -+ } -+ - /* attempt to add the device */ - d = handler->add (sysfs_path, device_file, parent_dev, parent_path); - if (d == NULL) { diff --git a/source/l/hal/patches/increase_HAL_PATH_MAX_to_4096.diff b/source/l/hal/patches/increase_HAL_PATH_MAX_to_4096.diff new file mode 100644 index 000000000..b4c770aee --- /dev/null +++ b/source/l/hal/patches/increase_HAL_PATH_MAX_to_4096.diff @@ -0,0 +1,30 @@ +commit a2c3dd5a04d79265772c09c4280606d5c2ed72c6 +Author: Martin Pitt <martin.pitt@ubuntu.com> +Date: Mon Jan 4 16:56:13 2010 +0100 + + Bump HAL_PATH_MAX to 4096 + + Some bits in the code use realpath() with destination paths of size + HAL_PATH_MAX. This potentially breaks on systems where PATH_MAX is bigger than + HAL_PATH_MAX (which was 512 until now). + + Since we can't use PATH_MAX directly (due to platforms like GNU/Hurd, which + apparently don't have it), just bump HAL_PATH_MAX to 4096 (as PATH_MAX is on + Linux), to avoid potential buffer overflows and also fix hal on Linux when + enabling FORTIFY in gcc. + + https://bugs.freedesktop.org/show_bug.cgi?id=25888 + +diff --git a/hald/util.h b/hald/util.h +index c2a1584..7883333 100644 +--- a/hald/util.h ++++ b/hald/util.h +@@ -38,7 +38,7 @@ + #endif + + #define HAL_NAME_MAX 256 +-#define HAL_PATH_MAX 512 ++#define HAL_PATH_MAX 4096 + + gboolean hal_util_remove_trailing_slash (gchar *path); + diff --git a/source/l/hal/patches/regen_fdi_cache_if_zero_size.diff b/source/l/hal/patches/regen_fdi_cache_if_zero_size.diff deleted file mode 100644 index ab3987488..000000000 --- a/source/l/hal/patches/regen_fdi_cache_if_zero_size.diff +++ /dev/null @@ -1,24 +0,0 @@ -Author: Richard Hughes <richard@hughsie.com> -Date: Thu Mar 5 09:40:10 2009 +0000 - - regenerate cache if it's zero sized - - Sometimes when systems go a bit haywire, the cache file is - written out as a zero byte file. We're still debugging this, - but in the case of a zero byte cache, just regenerate it anyway - -diff --git a/hald/mmap_cache.c b/hald/mmap_cache.c -index 6125cf0..cc1ffa5 100644 ---- a/hald/mmap_cache.c -+++ b/hald/mmap_cache.c -@@ -265,6 +265,10 @@ di_cache_coherency_check (gboolean setup_watches) - HAL_INFO(("Cache needs update")); - regen_cache(); - did_regen = TRUE; -+ } else if (st.st_size == 0) { -+ HAL_INFO(("Cache zero size, so regenerating")); -+ regen_cache(); -+ did_regen = TRUE; - } - } else { - regen_cache(); diff --git a/source/l/hal/patches/set_X_keymap_properly.diff b/source/l/hal/patches/set_X_keymap_properly.diff deleted file mode 100644 index 933bcfa3f..000000000 --- a/source/l/hal/patches/set_X_keymap_properly.diff +++ /dev/null @@ -1,96 +0,0 @@ -diff --git a/tools/hal_set_property.c b/tools/hal_set_property.c -index a99b059..3ab38bb 100644 ---- a/tools/hal_set_property.c -+++ b/tools/hal_set_property.c -@@ -66,7 +66,7 @@ usage (int argc, char *argv[]) - " (--int <value> | --string <value> | --bool <value> |\n" - " --strlist-pre <value> | --strlist-post <value> |\n" - " --strlist-rem <value> | --double <value> | --remove)\n" -- " [--help] [--version]\n"); -+ " [--direct] [--help] [--version]\n"); - fprintf (stderr, - "\n" " --udi Unique Device Id\n" - " --key Key of the property to set\n" -@@ -81,6 +81,7 @@ usage (int argc, char *argv[]) - " --strlist-post Append a string to a list\n" - " --strlist-rem Remove a string from a list\n" - " --remove Indicates that the property should be removed\n" -+ " --direct Use direct HAL connection\n" - " --version Show version and exit\n" - " --help Show this information and exit\n" - "\n" -@@ -114,6 +115,7 @@ main (int argc, char *argv[]) - dbus_bool_t is_version = FALSE; - int type = PROP_INVALID; - DBusError error; -+ dbus_bool_t direct = FALSE; - - if (argc <= 1) { - usage (argc, argv); -@@ -135,6 +137,7 @@ main (int argc, char *argv[]) - {"strlist-pre", 1, NULL, 0}, - {"strlist-post", 1, NULL, 0}, - {"strlist-rem", 1, NULL, 0}, -+ {"direct", 0, NULL, 0}, - {"remove", 0, NULL, 0}, - {"version", 0, NULL, 0}, - {"help", 0, NULL, 0}, -@@ -188,6 +191,8 @@ main (int argc, char *argv[]) - type = PROP_STRLIST_REM; - } else if (strcmp (opt, "remove") == 0) { - remove = TRUE; -+ } else if (strcmp (opt, "direct") == 0) { -+ direct = TRUE; - } else if (strcmp (opt, "udi") == 0) { - udi = strdup (optarg); - } else if (strcmp (opt, "version") == 0) { -@@ -215,24 +220,32 @@ main (int argc, char *argv[]) - - fprintf (stderr, "\n"); - -- dbus_error_init (&error); -- if ((hal_ctx = libhal_ctx_new ()) == NULL) { -- fprintf (stderr, "error: libhal_ctx_new\n"); -- return 1; -- } -- if (!libhal_ctx_set_dbus_connection (hal_ctx, dbus_bus_get (DBUS_BUS_SYSTEM, &error))) { -- fprintf (stderr, "error: libhal_ctx_set_dbus_connection: %s: %s\n", error.name, error.message); -- LIBHAL_FREE_DBUS_ERROR (&error); -- return 1; -- } -- if (!libhal_ctx_init (hal_ctx, &error)) { -- if (dbus_error_is_set(&error)) { -- fprintf (stderr, "error: libhal_ctx_init: %s: %s\n", error.name, error.message); -- dbus_error_free (&error); -+ dbus_error_init (&error); -+ if (direct) { -+ if ((hal_ctx = libhal_ctx_init_direct (&error)) == NULL) { -+ fprintf (stderr, "error: libhal_ctx_init_direct\n"); -+ LIBHAL_FREE_DBUS_ERROR (&error); -+ return 1; -+ } -+ } else { -+ if ((hal_ctx = libhal_ctx_new ()) == NULL) { -+ fprintf (stderr, "error: libhal_ctx_new\n"); -+ return 1; -+ } -+ if (!libhal_ctx_set_dbus_connection (hal_ctx, dbus_bus_get (DBUS_BUS_SYSTEM, &error))) { -+ fprintf (stderr, "error: libhal_ctx_set_dbus_connection: %s: %s\n", error.name, error.message); -+ LIBHAL_FREE_DBUS_ERROR (&error); -+ return 1; -+ } -+ if (!libhal_ctx_init (hal_ctx, &error)) { -+ if (dbus_error_is_set(&error)) { -+ fprintf (stderr, "error: libhal_ctx_init: %s: %s\n", error.name, error.message); -+ dbus_error_free (&error); -+ } -+ fprintf (stderr, "Could not initialise connection to hald.\n" -+ "Normally this means the HAL daemon (hald) is not running or not ready.\n"); -+ return 1; - } -- fprintf (stderr, "Could not initialise connection to hald.\n" -- "Normally this means the HAL daemon (hald) is not running or not ready.\n"); -- return 1; - } - - if (remove) { diff --git a/source/l/hal/patches/use_udevadm_not_udevinfo.patch b/source/l/hal/patches/use_udevadm_not_udevinfo.patch deleted file mode 100644 index 09f709e0b..000000000 --- a/source/l/hal/patches/use_udevadm_not_udevinfo.patch +++ /dev/null @@ -1,36 +0,0 @@ -From: Danny Kukawka <danny.kukawka@web.de> -Date: Wed, 27 Aug 2008 19:24:33 +0000 (+0200) -Subject: use udevadm instead of (deprecated) udevinfo -X-Git-Url: http://gitweb.freedesktop.org/?p=hal.git;a=commitdiff;h=f6af40c1e7ea54e6 - -use udevadm instead of (deprecated) udevinfo - -Use udevadm instead of (deprecated) udevinfo. Adapted/fixed version -of a patch contributed by Lucas Hazel <lucas@die.net.au> via HAL ML. - -diff -Nur hal-0.5.11.orig/hald/linux/blockdev.c hal-0.5.11/hald/linux/blockdev.c ---- hal-0.5.11.orig/hald/linux/blockdev.c 2008-05-07 18:23:41.000000000 -0500 -+++ hal-0.5.11/hald/linux/blockdev.c 2009-07-16 16:16:58.051983413 -0500 -@@ -1750,7 +1750,7 @@ - char *ret; - char *u_stdout; - int u_exit_status; -- const char *argv[] = {"/usr/bin/udevinfo", "--root", "--query", "name", "--path", NULL, NULL}; -+ const char *argv[] = {"/sbin/udevadm", "info", "--root", "--query", "name", "--path", NULL, NULL}; - GError *g_error; - - ret = NULL; -diff -Nur hal-0.5.11.orig/hald/linux/coldplug.c hal-0.5.11/hald/linux/coldplug.c ---- hal-0.5.11.orig/hald/linux/coldplug.c 2008-05-07 18:23:32.000000000 -0500 -+++ hal-0.5.11/hald/linux/coldplug.c 2009-07-16 16:16:58.051983413 -0500 -@@ -149,8 +149,8 @@ - static gboolean - hal_util_init_sysfs_to_udev_map (void) - { -- char *udevdb_export_argv[] = { "/usr/bin/udevinfo", "-e", NULL }; -- char *udevroot_argv[] = { "/usr/bin/udevinfo", "-r", NULL }; -+ char *udevdb_export_argv[] = { "/sbin/udevadm", "info", "-e", NULL }; -+ char *udevroot_argv[] = { "/sbin/udevadm", "info", "-r", NULL }; - int udevinfo_exitcode; - UdevInfo *info = NULL; - char *p; diff --git a/source/l/hal/slack-desc b/source/l/hal/slack-desc index c01fd8a68..0145a5df4 100644 --- a/source/l/hal/slack-desc +++ b/source/l/hal/slack-desc @@ -12,8 +12,8 @@ hal: HAL is a piece of software that provides a view of the various hal: hardware attached to a system. HAL keeps detailed metadata for each hal: piece of hardware and provides hooks so that system and desktop hal: software can react to changes in the hardware configuration (such as -hal: the insertion of a DVD, or a USB flash memory stick). Users in the -hal: "plugdev" or "cdrom" group will be able to use such devices on the -hal: desktop without the need to mount/umount them manually. +hal: the insertion of a DVD, or a USB flash memory stick). hal: hal: For more info, see: http://hal.freedesktop.org/ +hal: +hal: diff --git a/source/l/hicolor-icon-theme/hicolor-icon-theme.SlackBuild b/source/l/hicolor-icon-theme/hicolor-icon-theme.SlackBuild index 7d887d684..0a5aecaac 100755 --- a/source/l/hicolor-icon-theme/hicolor-icon-theme.SlackBuild +++ b/source/l/hicolor-icon-theme/hicolor-icon-theme.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,10 +21,9 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=${VERSION:-0.10} +VERSION=${VERSION:-0.12} ARCH=noarch -BUILD=${BUILD:-5} - +BUILD=${BUILD:-1} CWD=$(pwd) TMP=${TMP:-/tmp} @@ -51,13 +50,13 @@ make install DESTDIR=$PKG || exit 1 mkdir -p $PKG/var/log/setup cat $CWD/setup.08.gtk-update-icon-cache > $PKG/var/log/setup/setup.08.gtk-update-icon-cache -chmod 755 $PKG/var/log/setup/setup.08.gtk-update-icon-cache +chmod 0755 $PKG/var/log/setup/setup.08.gtk-update-icon-cache mkdir -p $PKG/usr/doc/hicolor-icon-theme-$VERSION cp -a \ COPYING README \ $PKG/usr/doc/hicolor-icon-theme-$VERSION -chmod 644 $PKG/usr/doc/hicolor-icon-theme-$VERSION/* +chmod 0644 $PKG/usr/doc/hicolor-icon-theme-$VERSION/* mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/l/hunspell/hunspell.SlackBuild b/source/l/hunspell/hunspell.SlackBuild new file mode 100755 index 000000000..78ca6fef8 --- /dev/null +++ b/source/l/hunspell/hunspell.SlackBuild @@ -0,0 +1,121 @@ +#!/bin/sh + +# Copyright 2010 Eric Hameleers, Eindhoven, NL +# Copyright 2010 Patrick J. Volkerding, Sebeka, MN, USA +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + +PKGNAM=hunspell +VERSION=${VERSION:-1.2.9} +BUILD=${BUILD:-1} + +NUMJOBS=${NUMJOBS:-" -j7 "} + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-${PKGNAM} +rm -rf $PKG +mkdir -p $TMP $PKG + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "s390" ]; then + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + +cd $TMP +rm -rf ${PKGNAM}-${VERSION} +tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1 +cd ${PKGNAM}-$VERSION || exit 1 + +# Make sure ownerships and permissions are sane: +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +# Build and install: +CFLAGS="$SLKCFLAGS" \ +CXXFLAGS="$SLKCFLAGS" \ +./configure \ + --prefix=/usr \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --sysconfdir=/etc \ + --localstatedir=/var \ + --mandir=/usr/man \ + --disable-static \ + --with-ui \ + --with-readline \ + --build=$ARCH-slackware-linux \ + +make $NUMJOBS || make || exit 1 +make install DESTDIR=$PKG || exit 1 + +# Strip binaries: +find $PKG | xargs file | grep -e "executable" -e "shared object" \ + | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + +# Compress and link manpages, if any: +if [ -d $PKG/usr/man ]; then + ( cd $PKG/usr/man + for manpagedir in $(find . -type d -name "man*") ; do + ( cd $manpagedir + for eachpage in $( find . -type l -maxdepth 1) ; do + ln -s $( readlink $eachpage ).gz $eachpage.gz + rm $eachpage + done + gzip -9 *.* + ) + done + ) +fi + +# Add a documentation directory: +mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION +cp -a \ + ABOUT-NLS AUTHORS* BUGS COPYING* ChangeLog* NEWS README* THANKS TODO \ + $PKG/usr/doc/${PKGNAM}-$VERSION + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc + +cd $PKG +/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz + diff --git a/source/l/hunspell/slack-desc b/source/l/hunspell/slack-desc new file mode 100644 index 000000000..b3a4761b6 --- /dev/null +++ b/source/l/hunspell/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler--------------------------------------------------| +hunspell: hunspell (spell checker and morphological analyzer library) +hunspell: +hunspell: Hunspell is a spell checker and morphological analyzer library +hunspell: and program designed for languages with rich morphology +hunspell: and complex word compounding or character encoding. +hunspell: Hunspell interfaces: Ispell-like terminal interface using Curses +hunspell: library, Ispell pipe interface, OpenOffice.org UNO module. +hunspell: +hunspell: +hunspell: Home page: http://hunspell.sourceforge.net/ +hunspell: diff --git a/source/l/imlib/imlib.SlackBuild b/source/l/imlib/imlib.SlackBuild index 73c60d0a0..e0b2627db 100755 --- a/source/l/imlib/imlib.SlackBuild +++ b/source/l/imlib/imlib.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,9 +22,18 @@ VERSION=1.9.15 -ARCH=${ARCH:-x86_64} NUMJOBS=${NUMJOBS:-" -j7 "} -BUILD=${BUILD:-5} +BUILD=${BUILD:-6} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -35,6 +44,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -46,7 +58,7 @@ mkdir -p $TMP $PKG/usr cd $TMP rm -rf imlib-$VERSION -tar xvf $CWD/imlib-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/imlib-$VERSION.tar.?z* || exit 1 cd imlib-$VERSION zcat $CWD/imlib.mitshm.render.diff.gz | patch -p1 --verbose || exit 1 diff --git a/source/l/jasper/jasper.SlackBuild b/source/l/jasper/jasper.SlackBuild index 45b0b0768..cda0001bd 100755 --- a/source/l/jasper/jasper.SlackBuild +++ b/source/l/jasper/jasper.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh # Copyright 2007, 2008 Eric Hameleers, Eijdhoven, NL -# Copyright 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # Permission to use, copy, modify, and distribute this software for @@ -23,10 +23,19 @@ # SUCH DAMAGE. -PRGNAM=jasper -VERSION=${VERSION:-1.900.1} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +PKGNAM=jasper +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-3} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi case "$ARCH" in i486) SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -44,18 +53,21 @@ case "$ARCH" in athlon-xp) SLKCFLAGS="-march=athlon-xp -O3 -pipe -fomit-frame-pointer" LIBDIRSUFFIX="" ;; + *) SLKCFLAGS="-O2" + LIBDIRSUFFIX="" + ;; esac CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-$PRGNAM +PKG=$TMP/package-$PKGNAM rm -rf $PKG mkdir -p $TMP $PKG cd $TMP -rm -rf $PRGNAM-$VERSION -tar xvf $CWD/$PRGNAM-$VERSION.tar.bz2 || exit 1 -cd $PRGNAM-$VERSION +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1 +cd $PKGNAM-$VERSION chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -80,10 +92,10 @@ CXXFLAGS="$SLKCFLAGS" \ make || exit 1 make DESTDIR=$PKG install -mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION cp -a \ COPYRIGHT INSTALL LICENSE NEWS README \ - $PKG/usr/doc/$PRGNAM-$VERSION + $PKG/usr/doc/$PKGNAM-$VERSION find $PKG/usr/doc -type f -exec chmod 644 {} \; find $PKG/usr/man -type f -name "*.?" -exec gzip -9f {} \; @@ -96,5 +108,5 @@ mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -/sbin/makepkg -l y -c n $TMP/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}.txz +/sbin/makepkg -l y -c n $TMP/${PKGNAM}-${VERSION}-${ARCH}-${BUILD}.txz diff --git a/source/l/jre/COPYRIGHT b/source/l/jre/COPYRIGHT index 2ae212072..ee5019b5c 100644 --- a/source/l/jre/COPYRIGHT +++ b/source/l/jre/COPYRIGHT @@ -1,4 +1,4 @@ -Copyright © 2009 Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, +Copyright © 2010 Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, California 95054, U.S.A. All rights reserved. Sun Microsystems, Inc. has intellectual property rights relating to @@ -33,7 +33,7 @@ identified on U.S. export exclusion lists, including, but not limited to, the denied persons and specially designated nationals lists is strictly prohibited. -Copyright © 2009 Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, +Copyright © 2010 Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, California 95054, Etats-Unis. Tous droits rservs. Sun Microsystems, Inc. dtient les droits de proprit intellectuele diff --git a/source/l/jre/README b/source/l/jre/README index 079eb00dc..002eae2f8 100644 --- a/source/l/jre/README +++ b/source/l/jre/README @@ -370,7 +370,7 @@ override, see The Java(TM) Runtime Environment (JRE) and the JavaFX(TM) runtime are products of Sun Microsystems(TM), Inc. -Copyright © 2009 Sun Microsystems, Inc. +Copyright © 2010 Sun Microsystems, Inc. 4150 Network Circle, Santa Clara, California 95054, U.S.A. All rights reserved. diff --git a/source/l/jre/THIRDPARTYLICENSEREADME.txt b/source/l/jre/THIRDPARTYLICENSEREADME.txt index 05bfc24d4..a84b0734c 100644 --- a/source/l/jre/THIRDPARTYLICENSEREADME.txt +++ b/source/l/jre/THIRDPARTYLICENSEREADME.txt @@ -1,24 +1,45 @@ DO NOT TRANSLATE OR LOCALIZE. -%% The following software may be included in this product: CS CodeViewer v1.0; Use of any of this software is governed by the terms of the license below: +%% The following software may be included in this product: CS CodeViewer v1.0; +Use of any of this software is governed by the terms of the license below: Copyright 1999 by CoolServlets.com. -Any errors or suggested improvements to this class can be reported as instructed on CoolServlets.com. We hope you enjoy this program... your comments will encourage further development! -This software is distributed under the terms of the BSD License. -Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: - -1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. -2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. -Neither name of CoolServlets.com nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. +Any errors or suggested improvements to this class can be reported as instructed +on CoolServlets.com. We hope you enjoy this program... your comments will +encourage further development! This software is distributed under the terms of +the BSD License. Redistribution and use in source and binary forms, with or +without modification, are permitted provided that the following conditions are +met: + +1. Redistributions of source code must retain the above copyright notice, this +list of conditions and the following disclaimer. + +2. Redistributions in binary form must reproduce the above copyright notice, +this list of conditions and the following disclaimer in the documentation and/or +other materials provided with the distribution. Neither name of +CoolServlets.com nor the names of its contributors may be used to endorse or +promote products derived from this software without specific prior written +permission. + +THIS SOFTWARE IS PROVIDED BY COOLSERVLETS.COM AND CONTRIBUTORS ``AS IS'' AND ANY +EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY +DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING INANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE." + +%% The following software may be included in this product: Crimson v1.1.1 ; Use +of any of this software is governed by the terms of the license below: -THIS SOFTWARE IS PROVIDED BY COOLSERVLETS.COM AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING INANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE." - -%% The following software may be included in this product: Crimson v1.1.1 ; Use of any of this software is governed by the terms of the license below: /* * The Apache Software License, Version 1.1 * * -* Copyright (c) 1999-2000 The Apache Software Foundation. All rights * reserved. +* Copyright (c) 1999-2000 The Apache Software Foundation. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -70,147 +91,323 @@ THIS SOFTWARE IS PROVIDED BY COOLSERVLETS.COM AND CONTRIBUTORS ``AS IS'' AND ANY */ -%% The following software may be included in this product: Xalan J2; Use of any of this software is governed by the terms of the license below: - +%% The following software may be included in this product: Xalan J2; Use of any of this +software is governed by the terms of the license below: + Apache License Version 2.0, January 2004 http://www.apache.org/licenses/ TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION - 1. Definitions. - - "License" shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1 through 9 of this document. - "Licensor" shall mean the copyright owner or entity authorized by the copyright owner that is granting the License. - - "Legal Entity" shall mean the union of the acting entity and all other entities that control, are controlled by, or are under common control with that entity. For the purposes of this definition, "control" means (i) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (ii) ownership of fifty percent (50%) or more of the outstanding shares, or (iii) beneficial ownership of such entity. - "You" (or "Your") shall mean an individual or Legal Entity exercising permissions granted by this License. - - "Source" form shall mean the preferred form for making modifications, including but not limited to software source code, documentation source, and configuration files. - - "Object" form shall mean any form resulting from mechanical transformation or translation of a Source form, including but not limited to compiled object code, generated documentation, and conversions to other media types. - - "Work" shall mean the work of authorship, whether in Source or Object form, made available under the License, as indicated by a copyright notice that is included in or attached to the work (an example is provided in the Appendix below). - - "Derivative Works" shall mean any work, whether in Source or Object form, that is based on (or derived from) the Work and for which the editorial revisions, annotations, elaborations, or other modifications represent, as a whole, an original work of authorship. For the purposes of this License, Derivative Works shall not include works that remain separable from, or merely link (or bind by name) to the interfaces of, the Work and Derivative Works thereof. - - "Contribution" shall mean any work of authorship, including the original version of the Work and any modifications or additions to that Work or Derivative Works thereof, that is intentionally submitted to Licensor for inclusion in the Work by the copyright owneror by an individual or Legal Entity authorized to submit on behalf of the copyright owner. For the purposes of this definition, "submitted" means any form of electronic, verbal, or written communication sent to the Licensor or its representatives, including but not limited to communication on electronic mailing lists, source code control systems, and issue tracking systems that are managed by, or on behalf of, the Licensor for the purpose of discussing and improving the Work, but excluding communication that is conspicuously marked or otherwise designated in writing by the copyright owner as "Not a Contribution." - - "Contributor" shall mean Licensor and any individual or Legal Entity on behalf of whom a Contribution has been received by Licensor and subsequently incorporated within the Work. - - 2. Grant of Copyright License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable copyright license to reproduce, prepare Derivative Works of, publicly display, publicly perform, sublicense, and distribute the Work and such Derivative Works in Source or Object form. - - 3. Grant of Patent License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable (except as stated in this section) patent license to make, have made, use, offer to sell, sell, import, and otherwise transfer the Work, where such license applies only to those patent claims licensable by such Contributor that are necessarily infringed by their Contribution(s) alone or by combination of their Contribution(s) with the Work to which such Contribution(s) was submitted. If You institute patent litigation against any entity (including a -cross-claim or counterclaim in a lawsuit) alleging that the Work or a Contribution incorporated within the Work constitutes direct or contributory patent infringement, then any patent licenses granted to You under this License for that Work shall terminate as of the date such litigation is filed. - - 4. Redistribution. You may reproduce and distribute copies of the Work or Derivative Works thereof in any medium, with or without modifications, and in Source or Object form, provided that You meet the following conditions: - - (a) You must give any other recipients of the Work or Derivative Works a copy of this License; and - - (b) You must cause any modified files to carry prominent notices stating that You changed the files; and - - (c) You must retain, in the Source form of any Derivative Works that You distribute, all copyright, patent, trademark, and attribution notices from the Source form of the Work, excluding those notices that do not pertain to any part of the Derivative Works; and - - (d) If the Work includes a "NOTICE" text file as part of its distribution, then any Derivative Works that You distribute must include a readable copy of the attribution notices contained within such NOTICE file, excluding those notices that do not pertain to any part of the Derivative Works, in at least one of the following places: within a NOTICE text file distributed as part of the Derivative Works; within the Source form or documentation, if provided along with the Derivative Works; or, within a display generated by the Derivative Works, if and wherever such third-party notices normally appear. The contents of the NOTICE file are for informational purposes only and do not modify the License. You may add Your own attribution notices within Derivative Works that You distribute, alongside or as an addendum to the NOTICE text from the Work, provided that such additional attribution notices cannot be construed as modifying the License. - - You may add Your own copyright statement to Your modifications and may provide additional or different license terms and conditions for use, reproduction, or distribution of Your modifications, or for any such Derivative Works as a whole, provided Your use,reproduction, and distribution of the Work otherwise complies with the conditions stated in this License. - - 5. Submission of Contributions. Unless You explicitly state otherwise, any Contribution intentionally submitted for inclusion in the Work by You to the Licensor shall be under the terms and conditions of this License, without any additional terms or conditions. Notwithstanding the above, nothing herein shall supersede or modify the terms of any separate license agreement you may have executed with Licensor regarding such Contributions. - - 6. Trademarks. This License does not grant permission to use the trade names, trademarks, service marks, or product names of the Licensor, except as required for reasonable and customary use in describing the origin of the Work and reproducing the content of the NOTICE file. - - 7. Disclaimer of Warranty. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License. - 8. Limitation of Liability. In no event and under no legal theory, whether in tort (including negligence), contract, or otherwise, unless required by applicable law (such as deliberate and grossly negligent acts) or agreed to in writing, shall any Contributor be liable to You for damages, including any direct, indirect, special, incidental, or consequential damages of any character arising as a result of this License or out of the use or inability to use the Work (including but not limited to damages for loss of goodwill, work stoppage, computer failure or malfunction, or any and all other commercial damages or losses), even if such Contributor has been advised of the possibility of such damages. +1. Definitions. - 9. Accepting Warranty or Additional Liability. While redistributing the Work or Derivative Works thereof, You may choose to offer,and charge a fee for, acceptance of support, warranty, indemnity, or other liability obligations and/or rights consistent with this License. However, in accepting such obligations, You may act only on Your own behalf and on Your sole responsibility, not on behalf of any other Contributor, and only if You agree to indemnify, defend, and hold each Contributor harmless for any liability incurred by, or claims asserted against, such Contributor by reason of your accepting any such warranty or additional liability. +"License" shall mean the terms and conditions for use, reproduction, and +distribution as defined by Sections 1 through 9 of this document. "Licensor" +shall mean the copyright owner or entity authorized by the copyright owner that +is granting the License. + +"Legal Entity" shall mean the union of the acting entity and all other entities +that control, are controlled by, or are under common control with that entity. +For the purposes of this definition, "control" means (i) the power, direct or +indirect, to cause the direction or management of such entity, whether by +contract or otherwise, or (ii) ownership of fifty percent (50%) or more of the +outstanding shares, or (iii) beneficial ownership of such entity. "You" (or +"Your") shall mean an individual or Legal Entity exercising permissions granted +by this License. + +"Source" form shall mean the preferred form for making modifications, including +but not limited to software source code, documentation source, and configuration +files. + +"Object" form shall mean any form resulting from mechanical transformation or +translation of a Source form, including but not limited to compiled object code, +generated documentation, and conversions to other media types. + +"Work" shall mean the work of authorship, whether in Source or Object form, made +available under the License, as indicated by a copyright notice that is included +in or attached to the work (an example is provided in the Appendix below). + +"Derivative Works" shall mean any work, whether in Source or Object form, that +is based on (or derived from) the Work and for which the editorial revisions, +annotations, elaborations, or other modifications represent, as a whole, an +original work of authorship. For the purposes of this License, Derivative Works +shall not include works that remain separable from, or merely link (or bind by +name) to the interfaces of, the Work and Derivative Works thereof. + +"Contribution" shall mean any work of authorship, including the original version +of the Work and any modifications or additions to that Work or Derivative Works +thereof, that is intentionally submitted to Licensor for inclusion in the Work +by the copyright owner or by an individual or Legal Entity authorized to submit +on behalf of the copyright owner. For the purposes of this definition, +"submitted" means any form of electronic, verbal, or written communication sent +to the Licensor or its representatives, including but not limited to +communication on electronic mailing lists, source code control systems, and +issue tracking systems that are managed by, or on behalf of, the Licensor for +the purpose of discussing and improving the Work, but excluding communication +that is conspicuously marked or otherwise designated in writing by the copyright +owner as "Not a Contribution." + +"Contributor" shall mean Licensor and any individual or Legal Entity on behalf +of whom a Contribution has been received by Licensor and subsequently +incorporated within the Work. + +2. Grant of Copyright License. Subject to the terms and conditions of this +License, each Contributor hereby grants to You a perpetual, worldwide, +non-exclusive, no-charge, royalty-free, irrevocable copyright license to +reproduce, prepare Derivative Works of, publicly display, publicly perform, +sublicense, and distribute the Work and such Derivative Works in Source or +Object form. + +3. Grant of Patent License. Subject to the terms and conditions of this +License, each Contributor hereby grants to You a perpetual, worldwide, +non-exclusive, no-charge, royalty-free, irrevocable (except as stated in this +section) patent license to make, have made, use, offer to sell, sell, import, +and otherwise transfer the Work, where such license applies only to those patent +claims licensable by such Contributor that are necessarily infringed by their +Contribution(s) alone or by combination of their Contribution(s) with the Work +to which such Contribution(s) was submitted. If You institute patent litigation +against any entity (including a cross-claim or counterclaim in a lawsuit) +alleging that the Work or a Contribution incorporated within the Work +constitutes direct or contributory patent infringement, then any patent licenses +granted to You under this License for that Work shall terminate as of the date +such litigation is filed. + +4. Redistribution. You may reproduce and distribute copies of the Work or +Derivative Works thereof in any medium, with or without modifications, and in +Source or Object form, provided that You meet the following conditions: + +(a) You must give any other recipients of the Work or Derivative Works a copy of +this License; and + +(b) You must cause any modified files to carry prominent notices stating that +You changed the files; and + +(c) You must retain, in the Source form of any Derivative Works that You +distribute, all copyright, patent, trademark, and attribution notices from the +Source form of the Work, excluding those notices that do not pertain to any part +of the Derivative Works; and + +(d) If the Work includes a "NOTICE" text file as part of its distribution, then +any Derivative Works that You distribute must include a readable copy of the +attribution notices contained within such NOTICE file, excluding those notices +that do not pertain to any part of the Derivative Works, in at least one of the +following places: within a NOTICE text file distributed as part of the +Derivative Works; within the Source form or documentation, if provided along +with the Derivative Works; or, within a display generated by the Derivative +Works, if and wherever such third-party notices normally appear. The contents +of the NOTICE file are for informational purposes only and do not modify the +License. You may add Your own attribution notices within Derivative Works that +You distribute, alongside or as an addendum to the NOTICE text from the Work, +provided that such additional attribution notices cannot be construed as +modifying the License. + +You may add Your own copyright statement to Your modifications and may provide +additional or different license terms and conditions for use, reproduction, or +distribution of Your modifications, or for any such Derivative Works as a whole, +provided Your use,reproduction, and distribution of the Work otherwise complies +with the conditions stated in this License. + +5. Submission of Contributions. Unless You explicitly state otherwise, any +Contribution intentionally submitted for inclusion in the Work by You to the +Licensor shall be under the terms and conditions of this License, without any +additional terms or conditions. Notwithstanding the above, nothing herein shall +supersede or modify the terms of any separate license agreement you may have +executed with Licensor regarding such Contributions. + +6. Trademarks. This License does not grant permission to use the trade names, +trademarks, service marks, or product names of the Licensor, except as required +for reasonable and customary use in describing the origin of the Work and +reproducing the content of the NOTICE file. + +7. Disclaimer of Warranty. Unless required by applicable law or agreed to in +writing, Licensor provides the Work (and each Contributor provides its +Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY +KIND, either express or implied, including, without limitation, any warranties +or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A +PARTICULAR PURPOSE. You are solely responsible for determining the +appropriateness of using or redistributing the Work and assume any risks +associated with Your exercise of permissions under this License. + +8. Limitation of Liability. In no event and under no legal theory, whether in +tort (including negligence), contract, or otherwise, unless required by +applicable law (such as deliberate and grossly negligent acts) or agreed to in +writing, shall any Contributor be liable to You for damages, including any +direct, indirect, special, incidental, or consequential damages of any character +arising as a result of this License or out of the use or inability to use the +Work (including but not limited to damages for loss of goodwill, work stoppage, +computer failure or malfunction, or any and all other commercial damages or +losses), even if such Contributor has been advised of the possibility of such +damages. + +9. Accepting Warranty or Additional Liability. While redistributing the Work +or Derivative Works thereof, You may choose to offer,and charge a fee for, +acceptance of support, warranty, indemnity, or other liability obligations +and/or rights consistent with this License. However, in accepting such +obligations, You may act only on Your own behalf and on Your sole +responsibility, not on behalf of any other Contributor, and only if You agree to +indemnify, defend, and hold each Contributor harmless for any liability incurred +by, or claims asserted against, such Contributor by reason of your accepting any +such warranty or additional liability. END OF TERMS AND CONDITIONS APPENDIX: How to apply the Apache License to your work. - To apply the Apache License to your work, attach the following boilerplate notice, with the fields enclosed by brackets "[]" replaced with your own identifying information. (Don't include the brackets!) The text should be enclosed in the appropriate comment syntax for the file format. We also recommend that a file or class name and description of purpose be included on the same "printed page" as the copyright notice for easier identification within third-party archives. +To apply the Apache License to your work, attach the following boilerplate +notice, with the fields enclosed by brackets "[]" replaced with your own +identifying information. (Don't include the brackets!) The text should be +enclosed in the appropriate comment syntax for the file format. We also +recommend that a file or class name and description of purpose be included on +the same "printed page" as the copyright notice for easier identification within +third-party archives. Copyright [yyyy] [name of copyright owner] - Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at +Licensed under the Apache License, Version 2.0 (the "License"); you may not use +this file except in compliance with the License. You may obtain a copy of the +License at http://www.apache.org/licenses/LICENSE-2.0 - Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS,WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. +Unless required by applicable law or agreed to in writing, software distributed +under the License is distributed on an "AS IS" BASIS,WITHOUT WARRANTIES OR +CONDITIONS OF ANY KIND, either express or implied. See the License for the +specific language governing permissions and limitations under the License. -%% The following software may be included in this product: NSIS 1.0j; Use of any of this software is governed by the terms of the license below: +%% The following software may be included in this product: NSIS 1.0j; Use of +any of this software is governed by the terms of the license below: Copyright (C) 1999-2000 Nullsoft, Inc. -This software is provided 'as-is', without any express or implied warranty. In no event will the authors be held liable for any damages arising from the use of this software. Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions: -1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not required. -2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software. -3. This notice may not be removed or altered from any source distribution. Justin Frankel justin@nullsoft.com" - + +This software is provided 'as-is', without any express or implied warranty. In +no event will the authors be held liable for any damages arising from the use of +this software. Permission is granted to anyone to use this software for any +purpose, including commercial applications, and to alter it and redistribute it +freely, subject to the following restrictions: + +1. The origin of this software must not be misrepresented; you must not claim +that you wrote the original software. If you use this software in a product, an +acknowledgment in the product documentation would be appreciated but is not +required. + +2. Altered source versions must be plainly marked as such, and must not be +misrepresented as being the original software. + +3. This notice may not be removed or altered from any source distribution. +Justin Frankel justin@nullsoft.com" + %% Some Portions licensed from IBM are available at: http://www.ibm.com/software/globalization/icu/ %% Portions Copyright Eastman Kodak Company 1992 -%% Lucida is a registered trademark or trademark of Bigelow & Holmes in the U.S. and other countries. +%% Lucida is a registered trademark or trademark of Bigelow & Holmes in the U.S. +and other countries. %% Portions licensed from Taligent, Inc. -%% The following software may be included in this product:IAIK PKCS Wrapper; Use of any of this software is governed by the terms of the license below: +%% The following software may be included in this product:IAIK PKCS Wrapper; Use +of any of this software is governed by the terms of the license below: -Copyright (c) 2002 Graz University of Technology. All rights reserved. -Redistribution and use in source and binary forms, with or without modification,are permitted provided that the following conditions are met: +Copyright (c) 2002 Graz University of Technology. All rights reserved. -1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. +Redistribution and use in source and binary forms, with or without +modification,are permitted provided that the following conditions are met: + +1. Redistributions of source code must retain the above copyright notice, this +list of conditions and the following disclaimer. -2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. +2. Redistributions in binary form must reproduce the above copyright notice, +this list of conditions and the following disclaimer in the documentation and/or +other materials provided with the distribution. -3. The end-user documentation included with the redistribution, if any, must include the following acknowledgment: +3. The end-user documentation included with the redistribution, if any, must +include the following acknowledgment: "This product includes software developed by IAIK of Graz University of Technology." - Alternately, this acknowledgment may appear in the software itself, if and wherever such third-party acknowledgments normally appear. +Alternately, this acknowledgment may appear in the software itself, if and +wherever such third-party acknowledgments normally appear. -4. The names "Graz University of Technology" and "IAIK of Graz University of Technology" must not be used to endorse or promote products derived from this software without prior written permission. +4. The names "Graz University of Technology" and "IAIK of Graz University of +Technology" must not be used to endorse or promote products derived from this +software without prior written permission. -5. Products derived from this software may not be called "IAIK PKCS Wrapper", nor may "IAIK" appear in their name, without prior written permission of Graz University of Technology. +5. Products derived from this software may not be called "IAIK PKCS Wrapper", +nor may "IAIK" appear in their name, without prior written permission of Graz +University of Technology. -THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE LICENSOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESSED OR IMPLIED WARRANTIES, +INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND +FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE LICENSOR +BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE +GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) +HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF +THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +%% The following software may be included in this product: Document Object +Model (DOM) v. Level 3; Use of any of this software is governed by the terms of +the license below: -%% The following software may be included in this product: Document Object Model (DOM) v. Level 3; Use of any of this software is governed by the terms of the license below: W3C SOFTWARE NOTICE AND LICENSE http://www.w3.org/Consortium/Legal/2002/copyright-software-20021231 -This work (and included software, documentation such as READMEs, or other related items) is being provided by the copyright holders under the following license. By obtaining, using and/or copying this work, you (the licensee) agree that you have read, understood, and will comply with the following terms and conditions. - -Permission to copy, modify, and distribute this software and its documentation, with or without modification, for -any purpose and without fee or royalty is hereby granted, provided that you include the following on ALL copies -of the software and documentation or portions thereof, including modifications: - 1.The full text of this NOTICE in a location viewable to users of the redistributed or derivative work. - 2.Any pre-existing intellectual property disclaimers, notices, or terms and conditions. If none exist, the - W3C Software Short Notice should be included (hypertext is preferred, text is permitted) within the body - of any redistributed or derivative code. - 3.Notice of any changes or modifications to the files, including the date changes were made. (We - recommend you provide URIs to the location from which the code is derived.) -THIS SOFTWARE AND DOCUMENTATION IS PROVIDED "AS IS," AND COPYRIGHT HOLDERS MAKENO REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE OR THAT THEUSE OF THE SOFTWARE OR DOCUMENTATION WILL NOT INFRINGE ANY THIRD PARTY PATENTS,COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS. - -COPYRIGHT HOLDERS WILL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL ORCONSEQUENTIAL DAMAGES ARISING OUT OF ANY USE OF THE SOFTWARE OR DOCUMENTATION. -The name and trademarks of copyright holders may NOT be used in advertising or publicity pertaining to the -software without specific, written prior permission. Title to copyright in this software and any associated -documentation will at all times remain with copyright holders. +This work (and included software, documentation such as READMEs, or other +related items) is being provided by the copyright holders under the following +license. By obtaining, using and/or copying this work, you (the licensee) agree +that you have read, understood, and will comply with the following terms and +conditions. + +Permission to copy, modify, and distribute this software and its documentation, +with or without modification, for any purpose and without fee or royalty is +hereby granted, provided that you include the following on ALL copies of the +software and documentation or portions thereof, including modifications: + +1.The full text of this NOTICE in a location viewable to users of the +redistributed or derivative work. + +2.Any pre-existing intellectual property disclaimers, notices, or terms and + conditions. If none exist, the W3C Software Short Notice should be included + (hypertext is preferred, text is permitted) within the body of any + redistributed or derivative code. + +3.Notice of any changes or modifications to the files, including the date + changes were made. (We recommend you provide URIs to the location from which + the code is derived.) + +THIS SOFTWARE AND DOCUMENTATION IS PROVIDED "AS IS," AND COPYRIGHT HOLDERS +MAKENO REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT +LIMITED TO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE +OR THAT THEUSE OF THE SOFTWARE OR DOCUMENTATION WILL NOT INFRINGE ANY THIRD +PARTY PATENTS,COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS. + +COPYRIGHT HOLDERS WILL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL +ORCONSEQUENTIAL DAMAGES ARISING OUT OF ANY USE OF THE SOFTWARE OR DOCUMENTATION. +The name and trademarks of copyright holders may NOT be used in advertising or +publicity pertaining to the software without specific, written prior permission. +Title to copyright in this software and any associated documentation will at all +times remain with copyright holders. ____________________________________ -This formulation of W3C's notice and license became active on December 31 2002. This version removes the -copyright ownership notice such that this license can be used with materials other than those owned by the -W3C, reflects that ERCIM is now a host of the W3C, includes references to this specific dated version of the -license, and removes the ambiguous grant of "use". Otherwise, this version is the same as the previous -version and is written so as to preserve the Free Software Foundation's assessment of GPL compatibility and -OSI's certification under the Open Source Definition. Please see our Copyright FAQ for common questions -about using materials from our site, including specific terms and conditions for packages like libwww, Amaya, -and Jigsaw. Other questions about this notice can be directed to -site-policy@w3.org. - -%% The following software may be included in this product: Xalan, Xerces; Use of any of this software is governed by the terms of the license below: /* +This formulation of W3C's notice and license became active on December 31 2002. +This version removes the copyright ownership notice such that this license can +be used with materials other than those owned by the W3C, reflects that ERCIM is +now a host of the W3C, includes references to this specific dated version of the +license, and removes the ambiguous grant of "use". Otherwise, this version is +the same as the previous version and is written so as to preserve the Free +Software Foundation's assessment of GPL compatibility and OSI's certification +under the Open Source Definition. Please see our Copyright FAQ for common +questions about using materials from our site, including specific terms and +conditions for packages like libwww, Amaya, and Jigsaw. Other questions about +this notice can be directed to site-policy@w3.org. + +%% The following software may be included in this product: Xalan, Xerces; Use +of any of this software is governed by the terms of the license below: /* + * The Apache Software License, Version 1.1 * * @@ -266,56 +463,140 @@ site-policy@w3.org. * information on the Apache Software Foundation, please see http://www.apache.org * -%% The following software may be included in this product: W3C XML Conformance Test Suites v. 20020606; Use of any of this software is governed by the terms of the license below: -W3C SOFTWARE NOTICE AND LICENSE -Copyright 1994-2002 World Wide Web Consortium, (Massachusetts Institute ofTechnology, Institut National de Recherche en Informatique et en Automatique,Keio University). All Rights Reserved. http://www.w3.org/Consortium/Legal/ -This W3C work (including software, documents, or other related items) is beingprovided by the copyright holders under the following license. By obtaining,using and/or copying this work, you (the licensee) agree that you have read,understood, and will comply with the following terms and conditions: +%% The following software may be included in this product: W3C XML Conformance +Test Suites v. 20020606; Use of any of this software is governed by the terms +of the license below: -Permission to use, copy, modify, and distribute this software and its -documentation, with or without modification, for any purpose and without fee orroyalty is hereby granted, provided that you include the following on ALL copiesof the software and documentation or portions thereof, including modifications,that you make: +W3C SOFTWARE NOTICE AND LICENSE - 1. The full text of this NOTICE in a location viewable to users of theredistributed or derivative work. - 2. Any pre-existing intellectual property disclaimers, notices, or terms andconditions. If none exist, a short notice of the following form (hypertext ispreferred, text is permitted) should be used within the body of any -redistributed or derivative code: "Copyright ýý [$date-of-software] World WideWeb Consortium, (Massachusetts Institute of Technology, Institut National deRecherche en Informatique et en Automatique, Keio University). All RightsReserved. http://www.w3.org/Consortium/Legal/" - 3. Notice of any changes or modifications to the W3C files, including thedate changes were made. (We recommend you provide URIs to the location fromwhich the code is derived.) +Copyright 1994-2002 World Wide Web Consortium, (Massachusetts Institute of +Technology, Institut National de Recherche en Informatique et en +Automatique,Keio University). All Rights Reserved. +http://www.w3.org/Consortium/Legal/ -THIS SOFTWARE AND DOCUMENTATION IS PROVIDED "AS IS," AND COPYRIGHT HOLDERS MAKENO REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITEDTO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE OR THATTHE USE OF THE SOFTWARE OR DOCUMENTATION WILL NOT INFRINGE ANY THIRD PARTYPATENTS, COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS. +This W3C work (including software, documents, or other related items) is being +provided by the copyright holders under the following license. By +obtaining,using and/or copying this work, you (the licensee) agree that you have +read,understood, and will comply with the following terms and conditions: -COPYRIGHT HOLDERS WILL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL ORCONSEQUENTIAL DAMAGES ARISING OUT OF ANY USE OF THE SOFTWARE OR DOCUMENTATION. -The name and trademarks of copyright holders may NOT be used in advertising orpublicity pertaining to the software without specific, written prior permission.Title to copyright in this software and any associated documentation will at alltimes remain with copyright holders. +Permission to use, copy, modify, and distribute this software and its +documentation, with or without modification, for any purpose and without fee +orroyalty is hereby granted, provided that you include the following on ALL +copiesof the software and documentation or portions thereof, including +modifications,that you make: + +1. The full text of this NOTICE in a location viewable to users of the +redistributed or derivative work. + +2. Any pre-existing intellectual property disclaimers, notices, or terms and +conditions. If none exist, a short notice of the following form (hypertext is +preferred, text is permitted) should be used within the body of any +redistributed or derivative code: "Copyright [$date-of-software] World Wide Web +Consortium, (Massachusetts Institute of Technology, Institut National +deRecherche en Informatique et en Automatique, Keio University). All Rights +Reserved. http://www.w3.org/Consortium/Legal/" + +3. Notice of any changes or modifications to the W3C files, including the date +changes were made. (We recommend you provide URIs to the location from which +the code is derived.) + +THIS SOFTWARE AND DOCUMENTATION IS PROVIDED "AS IS," AND COPYRIGHT HOLDERS +MAKENO REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT +LIMITEDTO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE +OR THATTHE USE OF THE SOFTWARE OR DOCUMENTATION WILL NOT INFRINGE ANY THIRD +PARTYPATENTS, COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS. + +COPYRIGHT HOLDERS WILL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL +ORCONSEQUENTIAL DAMAGES ARISING OUT OF ANY USE OF THE SOFTWARE OR DOCUMENTATION. + +The name and trademarks of copyright holders may NOT be used in advertising or +publicity pertaining to the software without specific, written prior permission. +Title to copyright in this software and any associated documentation will at all +times remain with copyright holders. ____________________________________ -This formulation of W3C's notice and license became active on August 14 1998 soas to improve compatibility with GPL. This version ensures that W3C softwarelicensing terms are no more restrictive than GPL and consequently W3C softwaremay be distributed in GPL packages. See the older formulation for the policyprior to this date. Please see our Copyright FAQ for common questions aboutusing materials from our site, including specific terms and conditions forpackages like libwww, Amaya, and Jigsaw. Other questions about this notice canbe directed to site-policy@w3.org. - -%% The following software may be included in this product: W3C XML Schema Test Collection v. 1.16.2; Use of any of this software is governed by the terms of the license below: W3C DOCUMENT NOTICE AND LICENSE -Copyright 1994-2002 World Wide Web Consortium, (Massachusetts Institute ofTechnology, Institut National de Recherche en Informatique et en Automatique,Keio University). All Rights Reserved. +This formulation of W3C's notice and license became active on August 14 1998 +soas to improve compatibility with GPL. This version ensures that W3C software +licensing terms are no more restrictive than GPL and consequently W3C software +may be distributed in GPL packages. See the older formulation for the policy +prior to this date. Please see our Copyright FAQ for common questions about +using materials from our site, including specific terms and conditions for +packages like libwww, Amaya, and Jigsaw. Other questions about this notice can +be directed to site-policy@w3.org. + +%% The following software may be included in this product: W3C XML Schema Test +Collection v. 1.16.2; Use of any of this software is governed by the terms of +the license below: W3C DOCUMENT NOTICE AND LICENSE + +Copyright 1994-2002 World Wide Web Consortium, (Massachusetts Institute of +Technology, Institut National de Recherche en Informatique et en +Automatique,Keio University). All Rights Reserved. http://www.w3.org/Consortium/Legal/ -Public documents on the W3C site are provided by the copyright holders under thefollowing license. The software or Document Type Definitions (DTDs) associatedwith W3C specifications are governed by the Software Notice. By using and/orcopying this document, or the W3C document from which this statement is linked,you (the licensee) agree that you have read, understood, and will comply withthe following terms and conditions: +Public documents on the W3C site are provided by the copyright holders under the +following license. The software or Document Type Definitions (DTDs) associated +with W3C specifications are governed by the Software Notice. By using and/or +copying this document, or the W3C document from which this statement is +linked,you (the licensee) agree that you have read, understood, and will comply +with the following terms and conditions: -Permission to use, copy, and distribute the contents of this document, or theW3C document from which this statement is linked, in any medium for any purposeand without fee or royalty is hereby granted, provided that you include thefollowing on ALL copies of the document, or portions thereof, that you use: - 1. A link or URL to the original W3C document. - 2. The pre-existing copyright notice of the original author, or if it doesn'texist, a notice of the form: "Copyright [$date-of-document] World Wide WebConsortium, (Massachusetts Institute of Technology, Institut National deRecherche en Informatique et en Automatique, Keio University). All RightsReserved. http://www.w3.org/Consortium/Legal/" (Hypertext is preferred, but atextual representation is permitted.) - 3. If it exists, the STATUS of the W3C document. +Permission to use, copy, and distribute the contents of this document, or theW3C +document from which this statement is linked, in any medium for any purpose and +without fee or royalty is hereby granted, provided that you include the +following on ALL copies of the document, or portions thereof, that you use: -When space permits, inclusion of the full text of this NOTICE should beprovided. We request that authorship attribution be provided in any software,documents, or other items or products that you create pursuant to the +1. A link or URL to the original W3C document. + +2. The pre-existing copyright notice of the original author, or if it doesn't +exist, a notice of the form: "Copyright [$date-of-document] World Wide +WebConsortium, (Massachusetts Institute of Technology, Institut National +deRecherche en Informatique et en Automatique, Keio University). All Rights +Reserved. http://www.w3.org/Consortium/Legal/" (Hypertext is preferred, but +atextual representation is permitted.) + +3. If it exists, the STATUS of the W3C document. + +When space permits, inclusion of the full text of this NOTICE should be +provided. We request that authorship attribution be provided in any +software,documents, or other items or products that you create pursuant to the implementation of the contents of this document, or any portion thereof. -No right to create modifications or derivatives of W3C documents is grantedpursuant to this license. However, if additional requirements (documented in theCopyright FAQ) are satisfied, the right to create modifications or derivativesis sometimes granted by the W3C to individuals complying with those requirements. -THIS DOCUMENT IS PROVIDED "AS IS," AND COPYRIGHT HOLDERS MAKE NO REPRESENTATIONSOR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OFMERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, OR TITLE;THAT THE CONTENTS OF THE DOCUMENT ARE SUITABLE FOR ANY PURPOSE; NOR THAT THEIMPLEMENTATION OF SUCH CONTENTS WILL NOT INFRINGE ANY THIRD PARTY PATENTS,COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS. - -COPYRIGHT HOLDERS WILL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL ORCONSEQUENTIAL DAMAGES ARISING OUT OF ANY USE OF THE DOCUMENT OR THE PERFORMANCEOR IMPLEMENTATION OF THE CONTENTS THEREOF. -The name and trademarks of copyright holders may NOT be used in advertising orpublicity pertaining to this document or its contents without specific, writtenprior permission. Title to copyright in this document will at all times remainwith copyright holders. +No right to create modifications or derivatives of W3C documents is granted +pursuant to this license. However, if additional requirements (documented in +the Copyright FAQ) are satisfied, the right to create modifications or +derivatives is sometimes granted by the W3C to individuals complying with those +requirements. THIS DOCUMENT IS PROVIDED "AS IS," AND COPYRIGHT HOLDERS MAKE NO +REPRESENTATIONSOR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, +WARRANTIES OFMERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, +NON-INFRINGEMENT, OR TITLE;THAT THE CONTENTS OF THE DOCUMENT ARE SUITABLE FOR +ANY PURPOSE; NOR THAT THEIMPLEMENTATION OF SUCH CONTENTS WILL NOT INFRINGE ANY +THIRD PARTY PATENTS,COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS. + +COPYRIGHT HOLDERS WILL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL +ORCONSEQUENTIAL DAMAGES ARISING OUT OF ANY USE OF THE DOCUMENT OR THE +PERFORMANCEOR IMPLEMENTATION OF THE CONTENTS THEREOF. + +The name and trademarks of copyright holders may NOT be used in advertising or +publicity pertaining to this document or its contents without specific, written +prior permission. Title to copyright in this document will at all times remain +with copyright holders. ---------------------------------------------------------------------------- -This formulation of W3C's notice and license became active on April 05 1999 soas to account for the treatment of DTDs, schema's and bindings. See the olderformulation for the policy prior to this date. Please see our Copyright FAQ forcommon questions about using materials from our site, including specific termsand conditions for packages like libwww, Amaya, and Jigsaw. Other questionsabout this notice can be directed to site-policy@w3.org. -webmaster -(last updated by reagle on 1999/04/99.) - +This formulation of W3C's notice and license became active on April 05 1999 soas +to account for the treatment of DTDs, schema's and bindings. See the older +formulation for the policy prior to this date. Please see our Copyright FAQ for +common questions about using materials from our site, including specific terms +and conditions for packages like libwww, Amaya, and Jigsaw. Other questions +about this notice can be directed to site-policy@w3.org. webmaster (last +updated by reagle on 1999/04/99.) + + +%% The following software may be included in this product: Mesa 3-D graphics +library v. 5; Use of any of this software is governed by the terms of the +license below: -%% The following software may be included in this product: Mesa 3-D graphics library v. 5; Use of any of this software is governed by the terms of the license below: core Mesa code include/GL/gl.h Brian Paul Mesa GLX driver include/GL/glx.h Brian Paul Mesa Ext registry include/GL/glext.h SGI @@ -323,329 +604,883 @@ SGI Free B include/GL/glxext.h Mesa license: -The Mesa distribution consists of several components. Different copyrights andlicenses apply to different components. For example, GLUT is copyrighted by MarkKilgard, some demo programs are copyrighted by SGI, some of the Mesa devicedrivers are copyrighted by their authors. See below for a list of Mesa'scomponents and the copyright/license for each. +The Mesa distribution consists of several components. Different copyrights and +licenses apply to different components. For example, GLUT is copyrighted by +Mark Kilgard, some demo programs are copyrighted by SGI, some of the Mesa device +drivers are copyrighted by their authors. See below for a list of Mesa's +components and the copyright/license for each. -The core Mesa library is licensed according to the terms of the XFree86copyright (an MIT-style license). This allows integration with the XFree86/DRIproject. Unless otherwise stated, the Mesa source code and documentation islicensed as follows: +The core Mesa library is licensed according to the terms of the XFree86copyright +(an MIT-style license). This allows integration with the XFree86/DRIproject. +Unless otherwise stated, the Mesa source code and documentation is licensed as +follows: -Copyright (C) 1999-2003 Brian Paul All Rights Reserved. +Copyright (C) 1999-2003 Brian Paul All Rights Reserved. -Permission is hereby granted, free of charge, to any person obtaining acopy of this software and associated documentation files (the "Software"),to deal in the Software without restriction, including without limitationthe rights to use, copy, modify, merge, publish, distribute, sublicense,and/or sell copies of the Software, and to permit persons to whom the -Software is furnished to do so, subject to the following conditions: +Permission is hereby granted, free of charge, to any person obtaining a copy of +this software and associated documentation files (the "Software"),to deal in the +Software without restriction, including without limitation the rights to use, +copy, modify, merge, publish, distribute, sublicense,and/or sell copies of the +Software, and to permit persons to whom the Software is furnished to do so, +subject to the following conditions: -The above copyright notice and this permission notice shall be includedin all copies or substantial portions of the Software. +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESSOR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,FITNESS +FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALLBRIAN PAUL BE +LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER INAN ACTION OF +CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE +SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESSOR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALLBRIAN PAUL BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER INAN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN -CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. SGI FREE SOFTWARE LICENSE B (Version 1.1 [02/22/2000]) 1. Definitions. -1.1 "Additional Notice Provisions" means such additional provisions as appear in the Notice in Original Code under the heading "Additional Notice Provisions." -1.2 "Covered Code" means the Original Code or Modifications, or any combination thereof. -1.3 "Hardware" means any physical device that accepts input, processes input, stores the results of processing, and/or provides output. -1.4 "Larger Work" means a work that combines Covered Code or portions thereof with code not governed by the terms of this License. -1.5 "Licensable" means having the right to grant, to the maximum extent possible, whether at the time of the initial grant or subsequently acquired, any and all of the rights conveyed herein. -1.6 "License" means this document. -1.7 "Licensed Patents" means patent claims Licensable by SGI that are infringed by the use or sale of Original Code or any Modifications provided by SGI, or any combination thereof. -1.8 "Modifications" means any addition to or deletion from the substance or structure of the Original Code or any previous Modifications. When Covered Code is released as a series of files, a Modification is: A. Any addition to the contents of a file containing Original Code and/or addition to or deletion from the contents of a file containing previous Modifications.B. Any new file that contains any part of the Original Code or previous Modifications. -1.9 "Notice" means any notice in Original Code or Covered Code, as required by and in compliance with this License. -1.10 "Original Code" means source code of computer software code that is described in the source code Notice required by Exhibit A as Original Code, and updates and error corrections specifically thereto. -1.11 "Recipient" means an individual or a legal entity exercising rights under, and complying with all of the terms of, this License or a future version of this License issued under Section 8. For legal entities, "Recipient" includes any entity that controls, is controlled by, or is under common control with Recipient. For purposes of this definition, "control" of an entity means (a) the power, direct or indirect, to direct or manage such entity, or (b) ownership of fifty percent (50%) or more of the outstanding shares or beneficial ownership of such entity. -1.12 "Recipient Patents" means patent claims Licensable by a Recipient that are infringed by the use or sale of Original Code or any Modifications provided by SGI, or any combination thereof. -1.13 "SGI" means Silicon Graphics, Inc. -1.14 "SGI Patents" means patent claims Licensable by SGI other than the Licensed Patents.2. License Grant and Restrictions. -2.1 SGI License Grant. Subject to the terms of this License and any third party intellectual property claims, for the duration of intellectual property protections inherent in the Original Code, SGI hereby grants Recipient a worldwide, royalty-free, non-exclusive license, to do the following: (i) under copyrights Licensable by SGI, to reproduce, distribute, create derivative works from, and, to the extent applicable, display and perform the Original Code and/or any Modifications provided by SGI alone and/or as part of a Larger Work; and (ii) under any Licensable Patents, to make, have made, use, sell, offer for sale, import and/or otherwise transfer the Original Code and/or any Modifications provided by SGI. Recipient accepts the terms and conditions of this License by undertaking any of the aforementioned actions. The patent license shall apply to the Covered Code if, at the time any related Modification is added, such addition of the Modification causes such combination to be covered by the Licensed Patents. The patent license in Section 2.1(ii) shall not apply to any other combinations that include the Modification. No patent license is provided under SGI Patents for infringements of SGI Patents by Modifications not provided by SGI or combinations of Original Code and Modifications not provided by SGI. 2.2 Recipient License Grant. Subject to the terms of this License and any third party intellectual property claims, Recipient hereby grants SGI and any other Recipients a worldwide, royalty-free, non-exclusive license, under any Recipient Patents, to make, have made, use, sell, offer for sale, import and/or otherwise transfer the Original Code and/or any Modifications provided by SGI. -2.3 No License For Hardware Implementations. The licenses granted in Section 2.1 and 2.2 are not applicable to implementation in Hardware of the algorithms embodied in the Original Code or any Modifications provided by SGI . -3. Redistributions. -3.1 Retention of Notice/Copy of License. The Notice set forth in Exhibit A, below, must be conspicuously retained or included in any and all redistributions of Covered Code. For distributions of the Covered Code in source code form, the Notice must appear in every file that can include a text comments field; in executable form, the Notice and a copy of this License must appear in related documentation or collateral where the Recipient's rights relating to Covered Code are described. Any Additional Notice Provisions which actually appears in the Original Code must also be retained or included in any and all redistributions of Covered Code. -3.2 Alternative License. Provided that Recipient is in compliance with the terms of this License, Recipient may, so long as without derogation of any of SGI's rights in and to the Original Code, distribute the source code and/or executable version(s) of Covered Code under (1) this License; (2) a license identical to this License but for only such changes as are necessary in order to clarify Recipient's role as licensor of Modifications; and/or (3) a license of Recipient's choosing, containing terms different from this License, provided that the license terms include this Section 3 and Sections 4, 6, 7, 10, 12, and 13, which terms may not be modified or superseded by any other terms of such license. If Recipient elects to use any license other than this License, Recipient must make it absolutely clear that any of its terms which differ from this License are offered by Recipient alone, and not by SGI. It is emphasized that this License is a limited license, and, regardless of the license form employed by Recipient in accordance with this Section 3.2, Recipient may relicense only such rights, in Original Code and Modifications by SGI, as it has actually been granted by SGI in this License. -3.3 Indemnity. Recipient hereby agrees to indemnify SGI for any liability incurred by SGI as a result of any such alternative license terms Recipient offers. -4. Termination. This License and the rights granted hereunder will terminate automatically if Recipient breaches any term herein and fails to cure such breach within 30 days thereof. Any sublicense to the Covered Code that is properly granted shall survive any termination of this License, absent termination by the terms of such sublicense. Provisions that, by their nature, must remain in effect beyond the termination of this License, shall survive. -5. No Trademark Or Other Rights. This License does not grant any rights to: (i) any software apart from the Covered Code, nor shall any other rights or licenses not expressly granted hereunder arise by implication, estoppel or otherwise with respect to the Covered Code; (ii) any trade name, trademark or service mark whatsoever, including without limitation any related right for purposes of endorsement or promotion of products derived from the Covered Code, without prior written permission of SGI; or (iii) any title to or ownership of the Original Code, which shall at all times remains with SGI. All rights in the Original Code not expressly granted under this License are reserved. -6. Compliance with Laws; Non-Infringement. There are various worldwide laws, regulations, and executive orders applicable to dispositions of Covered Code, including without limitation export, re-export, and import control laws, regulations, and executive orders, of the U.S. government and other countries, and Recipient is reminded it is obliged to obey such laws, regulations, and executive orders. Recipient may not distribute Covered Code that (i) in any way infringes (directly or contributorily) any intellectual property rights of any kind of any other person or entity or (ii) breaches any representation or warranty, express, implied or statutory, to which, under any applicable law, it might be deemed to have been subject. -7. Claims of Infringement. If Recipient learns of any third party claim that any disposition of Covered Code and/or functionality wholly or partially infringes the third party's intellectual property rights, Recipient will promptly notify SGI of such claim. -8. Versions of the License. SGI may publish revised and/or new versions of the License from time to time, each with a distinguishing version number. Once Covered Code has been published under a particular version of the License, Recipient may, for the duration of the license, continue to use it under the terms of that version, or choose to use such Covered Code under the terms of any subsequent version published by SGI. Subject to the provisions of Sections 3 and 4 of this License, only SGI may modify the terms applicable to Covered Code created under this License. -9. DISCLAIMER OF WARRANTY. COVERED CODE IS PROVIDED "AS IS." ALL EXPRESS AND IMPLIED WARRANTIES AND CONDITIONS ARE DISCLAIMED, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT. SGI ASSUMES NO RISK AS TO THE QUALITY AND PERFORMANCE OF THE SOFTWARE. SHOULD THE SOFTWARE PROVE DEFECTIVE IN ANY RESPECT, SGI ASSUMES NO COST OR LIABILITY FOR SERVICING, REPAIR OR CORRECTION. THIS DISCLAIMER OF WARRANTY IS AN ESSENTIAL PART OF THIS LICENSE. NO USE OF ANY COVERED CODE IS AUTHORIZED HEREUNDER EXCEPT SUBJECT TO THIS DISCLAIMER. -10. LIMITATION OF LIABILITY. UNDER NO CIRCUMSTANCES NOR LEGAL THEORY, WHETHER TORT (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE OR STRICT LIABILITY), CONTRACT, OR OTHERWISE, SHALL SGI OR ANY SGI LICENSOR BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY CHARACTER INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF GOODWILL, WORK STOPPAGE, LOSS OF DATA, COMPUTER FAILURE OR MALFUNCTION, OR ANY AND ALL OTHER COMMERCIAL DAMAGES OR LOSSES, EVEN IF SUCH PARTY SHALL HAVE BEEN INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. THIS LIMITATION OF LIABILITY SHALL NOT APPLY TO LIABILITY FOR DEATH OR PERSONAL INJURY RESULTING FROM SGI's NEGLIGENCE TO THE EXTENT APPLICABLE LAW PROHIBITS SUCH LIMITATION. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THAT EXCLUSION AND LIMITATION MAY NOT APPLY TO RECIPIENT. -11. Indemnity. Recipient shall be solely responsible for damages arising, directly or indirectly, out of its utilization of rights under this License. Recipient will defend, indemnify and hold harmless Silicon Graphics, Inc. from and against any loss, liability, damages, costs or expenses (including the payment of reasonable attorneys fees) arising out of Recipient's use, modification, reproduction and distribution of the Covered Code or out of any representation or warranty made by Recipient. -12. U.S. Government End Users. The Covered Code is a "commercial item" consisting of "commercial computer software" as such terms are defined in title 48 of the Code of Federal Regulations and all U.S. Government End Users acquire only the rights set forth in this License and are subject to the terms of this License. -13. Miscellaneous. This License represents the complete agreement concerning the its subject matter. If any provision of this License is held to be unenforceable, such provision shall be reformed so as to achieve as nearly as possible the same legal and economic effect as the original provision and the remainder of this License will remain in effect. This License shall be governed by and construed in accordance with the laws of the United States and the State of California as applied to agreements entered into and to be performed entirely within California between California residents. Any litigation relating to this License shall be subject to the exclusive jurisdiction of the Federal Courts of the Northern District of California (or, absent subject matter jurisdiction in such courts, the courts of the State of California), with venue lying exclusively in Santa Clara County, California, with the losing party responsible for costs, including without limitation, court costs and reasonable attorneys fees and expenses. The application of the United Nations Convention on Contracts for the International Sale of Goods is expressly excluded. Any law or regulation that provides that the language of a contract shall be construed against the drafter shall not apply to this License. -Exhibit A -License Applicability. Except to the extent portions of this file are made subject to an alternative license as permitted in the SGI Free Software License B, Version 1.1 (the "License"), the contents of this file are subject only to the provisions of the License. You may not use this file except in compliance with the License. You may obtain a copy of the License at Silicon Graphics, Inc., attn: Legal Services, 1600 Amphitheatre Parkway, Mountain View, CA 94043-1351, or at: http://oss.sgi.com/projects/FreeB -Note that, as provided in the License, the Software is distributed on an "AS IS" basis, with ALL EXPRESS AND IMPLIED WARRANTIES AND CONDITIONS DISCLAIMED, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT.Original Code. The Original Code is: [name of software, version number, and release date], developed by Silicon Graphics, Inc. The Original Code is Copyright (c) [dates of first publication, as appearing in the Notice in the Original Code] Silicon Graphics, Inc. Copyright in any portions created by third parties is as indicated elsewhere herein. All Rights Reserved.Additional Notice Provisions: [such additional provisions, if any, as appear in the Notice in the Original Code under the heading "Additional Notice Provisions"] - -%% The following software may be included in this product: Byte Code Engineering Library (BCEL) v. 5; Use of any of this software is governed by the terms of the license below: -Apache Software License -/ -==================================================================== -The Apache Software License, Version 1.1 +1.1 "Additional Notice Provisions" means such additional provisions as appear in +the Notice in Original Code under the heading "Additional Notice Provisions." -Copyright (c) 2001 The Apache Software Foundation. Allrights reserved. +1.2 "Covered Code" means the Original Code or Modifications, or any combination +thereof. -Redistribution and use in source and binary forms, withor without modification, are permitted provided that the followingconditions are met: +1.3 "Hardware" means any physical device that accepts input, processes input, +stores the results of processing, and/or provides output. -1. Redistributions of source code must retain the abovecopyright notice, this list of conditions and the followingdisclaimer. +1.4 "Larger Work" means a work that combines Covered Code or portions thereof +with code not governed by the terms of this License. -2. Redistributions in binary form must reproduce theabove copyright notice, this list of conditions and the followingdisclaimer in the documentation and/or other materials providedwith the distribution. +1.5 "Licensable" means having the right to grant, to the maximum extent +possible, whether at the time of the initial grant or subsequently acquired, any +and all of the rights conveyed herein. -3. The end-user documentation included with theredistribution, if any, must include the following acknowledgment: -"This product includes software developed by the Apache Software Foundation (http://www.apache.org/)." Alternately, this acknowledgment may appear in thesoftware itself, if and wherever such third-party acknowledgmentsnormally appear. +1.6 "License" means this document. -4. The names "Apache" and "Apache Software Foundation"and "Apache BCEL" must not be used to endorse or promoteproducts derived from this software without prior writtenpermission. For written permission, please contact apache@apache.org. +1.7 "Licensed Patents" means patent claims Licensable by SGI that are infringed +by the use or sale of Original Code or any Modifications provided by SGI, or any +combination thereof. + +1.8 "Modifications" means any addition to or deletion from the substance or +structure of the Original Code or any previous Modifications. When Covered Code +is released as a series of files, a Modification is: A. Any addition to the +contents of a file containing Original Code and/or addition to or deletion from +the contents of a file containing previous Modifications.B. Any new file that +contains any part of the Original Code or previous Modifications. + +1.9 "Notice" means any notice in Original Code or Covered Code, as required by +and in compliance with this License. + +1.10 "Original Code" means source code of computer software code that is +described in the source code Notice required by Exhibit A as Original Code, and +updates and error corrections specifically thereto. + +1.11 "Recipient" means an individual or a legal entity exercising rights under, +and complying with all of the terms of, this License or a future version of this +License issued under Section 8. For legal entities, "Recipient" includes any +entity that controls, is controlled by, or is under common control with +Recipient. For purposes of this definition, "control" of an entity means (a) +the power, direct or indirect, to direct or manage such entity, or (b) ownership +of fifty percent (50%) or more of the outstanding shares or beneficial ownership +of such entity. + +1.12 "Recipient Patents" means patent claims Licensable by a Recipient that are +infringed by the use or sale of Original Code or any Modifications provided by +SGI, or any combination thereof. -5. Products derived from this software may not be called"Apache", "Apache BCEL", nor may "Apache" appear in their name,without prior written permission of the Apache SoftwareFoundation. +1.13 "SGI" means Silicon Graphics, Inc. -THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED ORIMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIEDWARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSEARE DISCLAIMED. IN NO EVENT SHALL THE APACHE SOFTWAREFOUNDATION OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVERCAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICTLIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING INANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THEPOSSIBILITY OF SUCH DAMAGE. -==================================================================== +1.14 "SGI Patents" means patent claims Licensable by SGI other than the Licensed +Patents. + +2. License Grant and Restrictions. + +2.1 SGI License Grant. Subject to the terms of this License and any third party +intellectual property claims, for the duration of intellectual property +protections inherent in the Original Code, SGI hereby grants Recipient a +worldwide, royalty-free, non-exclusive license, to do the following: (i) under +copyrights Licensable by SGI, to reproduce, distribute, create derivative works +from, and, to the extent applicable, display and perform the Original Code +and/or any Modifications provided by SGI alone and/or as part of a Larger Work; +and (ii) under any Licensable Patents, to make, have made, use, sell, offer for +sale, import and/or otherwise transfer the Original Code and/or any +Modifications provided by SGI. Recipient accepts the terms and conditions of +this License by undertaking any of the aforementioned actions. The patent +license shall apply to the Covered Code if, at the time any related Modification +is added, such addition of the Modification causes such combination to be +covered by the Licensed Patents . The patent license in Section 2.1(ii) shall +not apply to any other combinations that include the Modification. No patent +license is provided under SGI Patents for infringements of SGI Patents by +Modifications not provided by SGI or combinations of Original Code and +Modifications not provided by SGI. + +2.2 Recipient License Grant. Subject to the terms of this License and any third +party intellectual property claims, Recipient hereby grants SGI and any other +Recipients a worldwide, royalty-free, non-exclusive license, under any Recipient +Patents, to make, have made, use, sell, offer for sale, import and/or otherwise +transfer the Original Code and/or any Modifications provided by SGI. + +2.3 No License For Hardware Implementations. The licenses granted in Section +2.1 and 2.2 are not applicable to implementation in Hardware of the algorithms +embodied in the Original Code or any Modifications provided by SGI . -This software consists of voluntary contributions made by many individuals on behalf of the Apache Software Foundation. For more information on the Apache Software Foundation, please see http://www.apache.org. / +3. Redistributions. +3.1 Retention of Notice/Copy of License. The Notice set forth in Exhibit A, +below, must be conspicuously retained or included in any and all redistributions +of Covered Code. For distributions of the Covered Code in source code form, the +Notice must appear in every file that can include a text comments field; in +executable form, the Notice and a copy of this License must appear in related +documentation or collateral where the Recipient's rights relating to Covered +Code are described. Any Additional Notice Provisions which actually appears in +the Original Code must also be retained or included in any and all +redistributions of Covered Code. + +3.2 Alternative License. Provided that Recipient is in compliance with the +terms of this License, Recipient may, so long as without derogation of any of +SGI's rights in and to the Original Code, distribute the source code and/or +executable version(s) of Covered Code under (1) this License; (2) a license +identical to this License but for only such changes as are necessary in order to +clarify Recipient's role as licensor of Modifications; and/or (3) a license of +Recipient's choosing, containing terms different from this License, provided +that the license terms include this Section 3 and Sections 4, 6, 7, 10, 12, and +13, which terms may not be modified or superseded by any other terms of such +license. If Recipient elects to use any license other than this License, +Recipient must make it absolutely clear that any of its terms which differ from +this License are offered by Recipient alone, and not by SGI. It is emphasized +that this License is a limited license, and, regardless of the license form +employed by Recipi ent in accordance with this Section 3.2, Recipient may +relicense only such rights, in Original Code and Modifications by SGI, as it has +actually been granted by SGI in this License. + +3.3 Indemnity. Recipient hereby agrees to indemnify SGI for any liability +incurred by SGI as a result of any such alternative license terms Recipient +offers. + +4. Termination. This License and the rights granted hereunder will terminate +automatically if Recipient breaches any term herein and fails to cure such +breach within 30 days thereof. Any sublicense to the Covered Code that is +properly granted shall survive any termination of this License, absent +termination by the terms of such sublicense. Provisions that, by their nature, +must remain in effect beyond the termination of this License, shall survive. + +5. No Trademark Or Other Rights. This License does not grant any rights to: +(i) any software apart from the Covered Code, nor shall any other rights or +licenses not expressly granted hereunder arise by implication, estoppel or +otherwise with respect to the Covered Code; (ii) any trade name, trademark or +service mark whatsoever, including without limitation any related right for +purposes of endorsement or promotion of products derived from the Covered Code, +without prior written permission of SGI; or (iii) any title to or ownership of +the Original Code, which shall at all times remains with SGI. All rights in the +Original Code not expressly granted under this License are reserved. + +6. Compliance with Laws; Non-Infringement. There are various worldwide laws, +regulations, and executive orders applicable to dispositions of Covered Code, +including without limitation export, re-export, and import control laws, +regulations, and executive orders, of the U.S. government and other countries, +and Recipient is reminded it is obliged to obey such laws, regulations, and +executive orders. Recipient may not distribute Covered Code that (i) in any way +infringes (directly or contributorily) any intellectual property rights of any +kind of any other person or entity or (ii) breaches any representation or +warranty, express, implied or statutory, to which, under any applicable law, it +might be deemed to have been subject. + +7. Claims of Infringement. If Recipient learns of any third party claim that +any disposition of Covered Code and/or functionality wholly or partially +infringes the third party's intellectual property rights, Recipient will +promptly notify SGI of such claim. + +8. Versions of the License. SGI may publish revised and/or new versions of the +License from time to time, each with a distinguishing version number. Once +Covered Code has been published under a particular version of the License, +Recipient may, for the duration of the license, continue to use it under the +terms of that version, or choose to use such Covered Code under the terms of any +subsequent version published by SGI. Subject to the provisions of Sections 3 +and 4 of this License, only SGI may modify the terms applicable to Covered Code +created under this License. + +9. DISCLAIMER OF WARRANTY. COVERED CODE IS PROVIDED "AS IS." ALL EXPRESS AND +IMPLIED WARRANTIES AND CONDITIONS ARE DISCLAIMED, INCLUDING, WITHOUT LIMITATION, +ANY IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY, SATISFACTORY QUALITY, +FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT. SGI ASSUMES NO RISK AS +TO THE QUALITY AND PERFORMANCE OF THE SOFTWARE. SHOULD THE SOFTWARE PROVE +DEFECTIVE IN ANY RESPECT, SGI ASSUMES NO COST OR LIABILITY FOR SERVICING, REPAIR +OR CORRECTION. THIS DISCLAIMER OF WARRANTY IS AN ESSENTIAL PART OF THIS +LICENSE. NO USE OF ANY COVERED CODE IS AUTHORIZED HEREUNDER EXCEPT SUBJECT TO +THIS DISCLAIMER. + +10. LIMITATION OF LIABILITY. UNDER NO CIRCUMSTANCES NOR LEGAL THEORY, WHETHER +TORT (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE OR STRICT LIABILITY), CONTRACT, +OR OTHERWISE, SHALL SGI OR ANY SGI LICENSOR BE LIABLE FOR ANY DIRECT, INDIRECT, +SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY CHARACTER INCLUDING, +WITHOUT LIMITATION, DAMAGES FOR LOSS OF GOODWILL, WORK STOPPAGE, LOSS OF DATA, +COMPUTER FAILURE OR MALFUNCTION, OR ANY AND ALL OTHER COMMERCIAL DAMAGES OR +LOSSES, EVEN IF SUCH PARTY SHALL HAVE BEEN INFORMED OF THE POSSIBILITY OF SUCH +DAMAGES. THIS LIMITATION OF LIABILITY SHALL NOT APPLY TO LIABILITY FOR DEATH OR +PERSONAL INJURY RESULTING FROM SGI's NEGLIGENCE TO THE EXTENT APPLICABLE LAW +PROHIBITS SUCH LIMITATION. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR +LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THAT EXCLUSION AND +LIMITATION MAY NOT APPLY TO RECIPIENT. + +11. Indemnity. Recipient shall be solely responsible for damages arising, +directly or indirectly, out of its utilization of rights under this License. +Recipient will defend, indemnify and hold harmless Silicon Graphics, Inc. from +and against any loss, liability, damages, costs or expenses (including the +payment of reasonable attorneys fees) arising out of Recipient's use, +modification, reproduction and distribution of the Covered Code or out of any +representation or warranty made by Recipient. + +12. U.S. Government End Users. The Covered Code is a "commercial item" +consisting of "commercial computer software" as such terms are defined in title +48 of the Code of Federal Regulations and all U.S. Government End Users acquire +only the rights set forth in this License and are subject to the terms of this +License. + +13. Miscellaneous. This License represents the complete agreement concerning +the its subject matter. If any provision of this License is held to be +unenforceable, such provision shall be reformed so as to achieve as nearly as +possible the same legal and economic effect as the original provision and the +remainder of this License will remain in effect. This License shall be governed +by and construed in accordance with the laws of the United States and the State +of California as applied to agreements entered into and to be performed entirely +within California between California residents. Any litigation relating to this +License shall be subject to the exclusive jurisdiction of the Federal Courts of +the Northern District of California (or, absent subject matter jurisdiction in +such courts, the courts of the State of California), with venue lying +exclusively in Santa Clara County, California, with the losing party responsible +for costs, including without limitation, court costs and reasonable attorneys +fees and ex penses. The application of the United Nations Convention on +Contracts for the International Sale of Goods is expressly excluded. Any law or +regulation that provides that the language of a contract shall be construed +against the drafter shall not apply to this License. + +Exhibit A License Applicability. Except to the extent portions of this file are +made subject to an alternative license as permitted in the SGI Free Software +License B, Version 1.1 (the "License"), the contents of this file are subject +only to the provisions of the License. You may not use this file except in +compliance with the License. You may obtain a copy of the License at Silicon +Graphics, Inc., attn: Legal Services, 1600 Amphitheatre Parkway, Mountain View, +CA 94043-1351, or at: http://oss.sgi.com/projects/FreeB Note that, as provided +in the License, the Software is distributed on an "AS IS" basis, with ALL +EXPRESS AND IMPLIED WARRANTIES AND CONDITIONS DISCLAIMED, INCLUDING, WITHOUT +LIMITATION, ANY IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY, +SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT. +Original Code. The Original Code is: [name of software, version number, and +release date], developed by Silicon Graphics, Inc. The Original Code is +Copyright (c) [dates of first publication, as appearing in the Notice in the +Original Code] Silicon Graphics, Inc. Copyright in any portions created by +third parties is as indicated elsewhere herein. All Rights Reserved. +Additional Notice Provisions: [such additional provisions, if any, as appear in +the Notice in the Original Code under the heading "Additional Notice +Provisions"] + +%% The following software may be included in this product: Byte Code +Engineering Library (BCEL) v. 5; Use of any of this software is governed by the +terms of the license below: +Apache Software License + +/ +==================================================================== +The Apache Software License, Version 1.1 -%% The following software may be included in this product: Regexp, Regular Expression Package v. 1.2; Use of any of this software is governed by the terms of the license below: The Apache Software License, Version 1.1 Copyright (c) 2001 The Apache Software Foundation. All rights reserved. -Redistribution and use in source and binary forms, with or without modification,are permitted provided that the following conditions are met: -1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +1. Redistributions of source code must retain the above copyright notice, this +list of conditions and the following disclaimer. + +2. Redistributions in binary form must reproduce the above copyright notice, +this list of conditions and the following disclaimer in the documentation and/or +other materials providedwith the distribution. + +3. The end-user documentation included with the redistribution, if any, must +include the following acknowledgment: "This product includes software developed +by the Apache Software Foundation (http://www.apache.org/)." Alternately, this +acknowledgment may appear in the software itself, if and wherever such +third-party acknowledgments normally appear. + +4. The names "Apache" and "Apache Software Foundation"and "Apache BCEL" must +not be used to endorse or promote products derived from this software without +prior written permission. For written permission, please contact +apache@apache.org. + +5. Products derived from this software may not be called"Apache", "Apache +BCEL", nor may "Apache" appear in their name,without prior written permission of +the Apache Software Foundation. + +THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED ORIMPLIED WARRANTIES, +INCLUDING, BUT NOT LIMITED TO, THE IMPLIEDWARRANTIES OF MERCHANTABILITY AND +FITNESS FOR A PARTICULAR PURPOSEARE DISCLAIMED. IN NO EVENT SHALL THE APACHE +SOFTWAREFOUNDATION OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT,INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;LOSS OF USE, DATA, +OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVERCAUSED AND ON ANY THEORY OF +LIABILITY, WHETHER IN CONTRACT, STRICTLIABILITY, OR TORT (INCLUDING NEGLIGENCE +OR OTHERWISE) ARISING INANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED +OF THEPOSSIBILITY OF SUCH DAMAGE. +==================================================================== -2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. +This software consists of voluntary contributions made by many individuals on +behalf of the Apache Software Foundation. For more information on the Apache +Software Foundation, please see http://www.apache.org. / -3. The end-user documentation included with the redistribution, if any, must include the following acknowledgment: -"This product includes software developed by the Apache Software Foundation (http://www.apache.org/)." Alternately, this acknowledgment may appear in the software itself, if and wherever such third-party acknowledgments normally appear. -4. The names "Apache" and "Apache Software Foundation" and "Apache Turbine" must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact apache@apache.org. -5. Products derived from this software may not be called "Apache", "Apache Turbine", nor may "Apache" appear in their name, without prior written permission of the Apache Software Foundation. +%% The following software may be included in this product: Regexp, Regular +Expression Package v. 1.2; Use of any of this software is governed by the terms +of the license below: The Apache Software License, Version 1.1 -THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE APACHE SOFTWARE FOUNDATION OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -==================================================================== -This software consists of voluntary contributions made by many individuals on behalf of the Apache Software Foundation. For more information on the Apache Software Foundation, please see http://www.apache.org. +Copyright (c) 2001 The Apache Software Foundation. All rights reserved. -%% The following software may be included in this product: CUP Parser Generator for Java v. 0.10k; Use of any of this software is governed by the terms of the license below: CUP Parser Generator Copyright Notice, License, and Disclaimer +Redistribution and use in source and binary forms, with or without +modification,are permitted provided that the following conditions are met: -Copyright 1996-1999 by Scott Hudson, Frank Flannery, C. Scott Ananian -Permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is hereby granted, provided thatthe above copyright notice appear in all copies and that both the copyright notice and this permission notice and warranty disclaimer appear in supporting documentation, and that the names of the authors or their employersnot be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission. +1. Redistributions of source code must retain the above copyright notice, this +list of conditions and the following disclaimer. -The authors and their employers disclaim all warranties with regard to thissoftware, including all implied warranties of merchantability and fitness. In no event shall the authors or their employers be liable for anyspecial, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits, whether in an action of contract,negligence or other tortious action, arising out of or in connection withthe use or performance of this software. +2. Redistributions in binary form must reproduce the above copyright notice, +this list of conditions and the following disclaimer in the documentation and/or +other materials provided with the distribution. -%% The following software may be included in this product: JLex: A Lexical Analyzer Generator for Java v. 1.2.5; Use of any of this software is governed by the terms of the license below: JLEX COPYRIGHT NOTICE, LICENSE AND DISCLAIMER. +3. The end-user documentation included with the redistribution, if any, must +include the following acknowledgment: "This product includes software developed +by the Apache Software Foundation (http://www.apache.org/)." Alternately, this +acknowledgment may appear in the software itself, if and wherever such +third-party acknowledgments normally appear. -Copyright 1996-2003 by Elliot Joel Berk and C. Scott Ananian +4. The names "Apache" and "Apache Software Foundation" and "Apache Turbine" +must not be used to endorse or promote products derived from this software +without prior written permission. For written permission, please contact +apache@apache.org. -Permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is hereby granted, provided that the above copyright noticeappear in all copies and that both the copyright notice and this permission notice and warrantydisclaimer appear in supporting documentation, and that the name of the authors or their employersnot be used in advertising or publicity pertaining to distribution of the software withoutspecific, written prior permission. +5. Products derived from this software may not be called "Apache", "Apache +Turbine", nor may "Apache" appear in their name, without prior written +permission of the Apache Software Foundation. -The authors and their employers disclaim all warranties with regard to thissoftware, including all implied warranties of merchantability and fitness. In no event shall the authorsor their employers be liable for any special, indirect or consequential damages or any damageswhatsoever resulting from loss of use, data or profits, whether in an action of contract, negligenceor other tortious action, arising out of or in connection with the use or performance of thissoftware. +THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, +INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND +FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE APACHE +SOFTWARE FOUNDATION OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF +LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE +OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -Java is a trademark of Sun Microsystems, Inc. References to the Java programminglanguage in relation to JLex are not meant to imply that Sun endorses this product. +==================================================================== -%% The following software may be included in this product: SAX v. 2.0.1; Use of any of this software is governed by the terms of the license below: Copyright Status +This software consists of voluntary contributions made by many individuals on +behalf of the Apache Software Foundation. For more information on the Apache +Software Foundation, please see http://www.apache.org. + +%% The following software may be included in this product: CUP Parser Generator +for Java v. 0.10k; Use of any of this software is governed by the terms of the +license below: CUP Parser Generator Copyright Notice, License, and Disclaimer + +Copyright 1996-1999 by Scott Hudson, Frank Flannery, C. Scott Ananian + +Permission to use, copy, modify, and distribute this software and its +documentation for any purpose and without fee is hereby granted, provided that +the above copyright notice appear in all copies and that both the copyright +notice and this permission notice and warranty disclaimer appear in supporting +documentation, and that the names of the authors or their employers not be used +in advertising or publicity pertaining to distribution of the software without +specific, written prior permission. + +The authors and their employers disclaim all warranties with regard to this +software, including all implied warranties of merchantability and fitness. In +no event shall the authors or their employers be liable for any special, +indirect or consequential damages or any damages whatsoever resulting from loss +of use, data or profits, whether in an action of contract,negligence or other +tortious action, arising out of or in connection with the use or performance of +this software. + +%% The following software may be included in this product: JLex: A Lexical +Analyzer Generator for Java v. 1.2.5; Use of any of this software is governed +by the terms of the license below: JLEX COPYRIGHT NOTICE, LICENSE AND +DISCLAIMER. + +Copyright 1996-2003 by Elliot Joel Berk and C. Scott Ananian + +Permission to use, copy, modify, and distribute this software and its +documentation for any purpose and without fee is hereby granted, provided that +the above copyright notice appear in all copies and that both the copyright +notice and this permission notice and warranty disclaimer appear in supporting +documentation, and that the name of the authors or their employers not be used +in advertising or publicity pertaining to distribution of the software without +specific, written prior permission. + +The authors and their employers disclaim all warranties with regard to this +software, including all implied warranties of merchantability and fitness. In +no event shall the authors or their employers be liable for any special, +indirect or consequential damages or any damages whatsoever resulting from loss +of use, data or profits, whether in an action of contract, negligence or other +tortious action, arising out of or in connection with the use or performance of +this software. + +Java is a trademark of Sun Microsystems, Inc. References to the Java +programming language in relation to JLex are not meant to imply that Sun +endorses this product. + +%% The following software may be included in this product: SAX v. 2.0.1; Use +of any of this software is governed by the terms of the license below: +Copyright Status SAX is free! -In fact, it's not possible to own a license to SAX, since it's been placed in the public domain. +In fact, it's not possible to own a license to SAX, since it's been placed in +the public domain. No Warranty -Because SAX is released to the public domain, there is no warranty for the design or for the software implementation, to the extent permitted by applicable law. Except when otherwise stated in writing the copyright holders and/or other parties provide SAX "as is" without warranty of any kind, either expressed or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The entire risk as to the quality and performance of SAX is with you. Should SAX prove defective, you assume the cost of all necessary servicing, repair or correction. - -In no event unless required by applicable law or agreed to in writing will any copyright holder, or any other party who may modify and/or redistribute SAX, be liable to you for damages, including any general, special, incidental or consequential damages arising out of the use or inability to use SAX (including but not limited to loss of data or data being rendered inaccurate or losses sustained by you or third parties or a failure of the SAX to operate with any other programs), even if such holder or other party has been advised of the possibility of such damages. +Because SAX is released to the public domain, there is no warranty for the +design or for the software implementation, to the extent permitted by applicable +law. Except when otherwise stated in writing the copyright holders and/or other +parties provide SAX "as is" without warranty of any kind, either expressed or +implied, including, but not limited to, the implied warranties of +merchantability and fitness for a particular purpose. The entire risk as to the +quality and performance of SAX is with you. Should SAX prove defective, you +assume the cost of all necessary servicing, repair or correction. + +In no event unless required by applicable law or agreed to in writing will any +copyright holder, or any other party who may modify and/or redistribute SAX, be +liable to you for damages, including any general, special, incidental or +consequential damages arising out of the use or inability to use SAX (including +but not limited to loss of data or data being rendered inaccurate or losses +sustained by you or third parties or a failure of the SAX to operate with any +other programs), even if such holder or other party has been advised of the +possibility of such damages. Copyright Disclaimers -This page includes statements to that effect by David Megginson, who would have been able to claim copyright for the original work. +This page includes statements to that effect by David Megginson, who would have +been able to claim copyright for the original work. -SAX 1.0 +SAX 1.0 -Version 1.0 of the Simple API for XML (SAX), created collectively by the membership of the XML-DEV mailing list, is hereby released into the public domain. +Version 1.0 of the Simple API for XML (SAX), created collectively by the +membership of the XML-DEV mailing list, is hereby released into the public +domain. -No one owns SAX: you may use it freely in both commercial and non-commercial applications, bundle it with your software distribution, include it on a CD-ROM, list the source code in a book, mirror the documentation at your own web site, or use it in any other way you see fit. +No one owns SAX: you may use it freely in both commercial and non-commercial +applications, bundle it with your software distribution, include it on a CD-ROM, +list the source code in a book, mirror the documentation at your own web site, +or use it in any other way you see fit. David Megginson, sax@megginson.com 1998-05-11 SAX 2.0 -I hereby abandon any property rights to SAX 2.0 (the Simple API for XML), and release all of the SAX 2.0 source code, compiled code, and documentation contained in this distribution into the Public Domain. SAX comes with NO WARRANTY or guarantee of fitness for any purpose. +I hereby abandon any property rights to SAX 2.0 (the Simple API for XML), and +release all of the SAX 2.0 source code, compiled code, and documentation +contained in this distribution into the Public Domain. SAX comes with NO +WARRANTY or guarantee of fitness for any purpose. David Megginson, david@megginson.com 2000-05-05 -%% The following software may be included in this product: Cryptix; Use of any of this software is governed by the terms of the license below: +%% The following software may be included in this product: Cryptix; Use of any +of this software is governed by the terms of the license below: + Cryptix General License Copyright © 1995-2003 The Cryptix Foundation Limited. All rights reserved. -Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions aremet: - -1.Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer. -2.Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. -THIS SOFTWARE IS PROVIDED BY THE CRYPTIX FOUNDATION LIMITED AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS ORIMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FORA PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE CRYPTIX FOUNDATION LIMITED OR CONTRIBUTORS BELIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOTLIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESSINTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OFTHE POSSIBILITY OF SUCH DAMAGE. - -%% The following software may be included in this product: W3C XML Schema Test Collection; Use of any of this software is governed by the terms of the license below: -W3C® DOCUMENT NOTICE AND LICENSE -Copyright © 1994-2002 World Wide Web Consortium, (Massachusetts Institute ofTechnology, Institut National de Recherche en Informatique et en Automatique,Keio University). All Rights Reserved. -http://www.w3.org/Consortium/Legal/ - -Public documents on the W3C site are provided by the copyright holders under thefollowing license. The software or Document Type Definitions (DTDs) associatedwith W3C specifications are governed by the Software Notice. By using and/orcopying this document, or the W3C document from which this statement is linked,you (the licensee) agree that you have read, understood, and will comply withthe following terms and conditions: - -Permission to use, copy, and distribute the contents of this document, or theW3C document from which this statement is linked, in any medium for any purposeand without fee or royalty is hereby granted, provided that you include thefollowing on ALL copies of the document, or portions thereof, that you use: - 1. A link or URL to the original W3C document. - 2. The pre-existing copyright notice of the original author, or if it doesn'texist, a notice of the form: "Copyright © [$date-of-document] World Wide WebConsortium, (Massachusetts Institute of Technology, Institut National deRecherche en Informatique et en Automatique, Keio University). All RightsReserved. http://www.w3.org/Consortium/Legal/" (Hypertext is preferred, but atextual representation is permitted.) - 3. If it exists, the STATUS of the W3C document. - -When space permits, inclusion of the full text of this NOTICE should beprovided. We request that authorship attribution be provided in any software,documents, or other items or products that you create pursuant to the -implementation of the contents of this document, or any portion thereof. -No right to create modifications or derivatives of W3C documents is grantedpursuant to this license. However, if additional requirements (documented in theCopyright FAQ) are satisfied, the right to create modifications or derivativesis sometimes granted by the W3C to individuals complying with those requirements. -THIS DOCUMENT IS PROVIDED "AS IS," AND COPYRIGHT HOLDERS MAKE NO REPRESENTATIONSOR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OFMERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, OR TITLE;THAT THE CONTENTS OF THE DOCUMENT ARE SUITABLE FOR ANY PURPOSE; NOR THAT THEIMPLEMENTATION OF SUCH CONTENTS WILL NOT INFRINGE ANY THIRD PARTY PATENTS,COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS. -COPYRIGHT HOLDERS WILL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL ORCONSEQUENTIAL DAMAGES ARISING OUT OF ANY USE OF THE DOCUMENT OR THE PERFORMANCEOR IMPLEMENTATION OF THE CONTENTS THEREOF. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: -The name and trademarks of copyright holders may NOT be used in advertising orpublicity pertaining to this document or its contents without specific, writtenprior permission. Title to copyright in this document will at all times remainwith copyright holders. +1.Redistributions of source code must retain the copyright notice, this list of +conditions and the following disclaimer. ----------------------------------------------------------------------------- -This formulation of W3C's notice and license became active on April 05 1999 soas to account for the treatment of DTDs, schema's and bindings. See the olderformulation for the policy prior to this date. Please see our Copyright FAQ forcommon questions about using materials from our site, including specific termsand conditions for packages like libwww, Amaya, and Jigsaw. Other questionsabout this notice can be directed to site-policy@w3.org. -webmaster -(last updated by reagle on 1999/04/99.) - -%% The following software may be included in this product: Stax API; Use of any of this software is governed by the terms of the license below: -Streaming API for XML (JSR-173) Specification -Reference Implementation -License Agreement - -READ THE TERMS OF THIS (THE "AGREEMENT") CAREFULLY BEFORE VIEWING OR USING THESOFTWARE LICENSED HEREUNDER. BY VIEWING OR USING THE SOFTWARE, YOU AGREE TO THE TERMS OF THISAGREEMENT. IF YOU ARE ACCESSING THE SOFTWARE ELECTRONICALLY, INDICATE YOUR ACCEPTANCE OF THESETERMS BY SELECTING THE "ACCEPT" BUTTON AT THE END OF THIS AGREEMENT. IF YOU DO NOT AGREE TOALL THESE TERMS, PROMPTLY RETURN THE UNUSED SOFTWARE TO ORIGINAL CONTRIBUTOR, DEFINED HEREIN. -1.0 DEFINITIONS. +2.Redistributions in binary form must reproduce the above copyright notice, this +list of conditions and the following disclaimer in the documentation and/or +other materials provided with the distribution. THIS SOFTWARE IS PROVIDED BY +THE CRYPTIX FOUNDATION LIMITED AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS +ORIMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +MERCHANTABILITY AND FITNESS FORA PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT +SHALL THE CRYPTIX FOUNDATION LIMITED OR CONTRIBUTORS BELIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +BUT NOTLIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +DATA, OR PROFITS; OR BUSINESSINTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF +LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT(INCLUDING NEGLIGENCE +OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +ADVISED OFTHE POSSIBILITY OF SUCH DAMAGE. -1.1. "BEA" means BEA Systems, Inc., the licensor of the Original Code. -1.2. "Contributor" means BEA and each entity that creates or contributes to thecreation of Modifications. +%% The following software may be included in this product: W3C XML Schema Test +Collection; Use of any of this software is governed by the terms of the license +below: -1.3. "Covered Code" means the Original Code or Modifications or the combinationof the Original Code and Modifications, in each case including portions thereof and corresponding documentation released with the source code. +W3C DOCUMENT NOTICE AND LICENSE -1.4. "Executable" means Covered Code in any form other than Source Code. -1.5. "FCS" means first commercial shipment of a product. +Copyright 1994-2002 World Wide Web Consortium, (Massachusetts Institute of +Technology, Institut National de Recherche en Informatique et en +Automatique,Keio University). All Rights Reserved. -1.6. "Modifications" means any addition to or deletion from the substance orstructure of either the Original Code or any previous Modifications. When Covered Code isreleased as a series of files, a Modification is: +http://www.w3.org/Consortium/Legal/ -(a) Any addition to or deletion from the contents of a file containing OriginalCode or previous Modifications. +Public documents on the W3C site are provided by the copyright holders under the +following license. The software or Document Type Definitions (DTDs) associated +with W3C specifications are governed by the Software Notice. By using and/or +copying this document, or the W3C document from which this statement is +linked,you (the licensee) agree that you have read, understood, and will comply +with the following terms and conditions: + +Permission to use, copy, and distribute the contents of this document, or theW3C +document from which this statement is linked, in any medium for any purpose and +without fee or royalty is hereby granted, provided that you include the +following on ALL copies of the document, or portions thereof, that you use: + +1. A link or URL to the original W3C document. +2. The pre-existing copyright notice of the original author, or if it doesn't +exist, a notice of the form: "Copyright [$date-of-document] World Wide Web +Consortium, (Massachusetts Institute of Technology, Institut National +deRecherche en Informatique et en Automatique, Keio University). All Rights +Reserved. http://www.w3.org/Consortium/Legal/" (Hypertext is preferred, but a +textual representation is permitted.) +3. If it exists, the STATUS of the W3C document. + +When space permits, inclusion of the full text of this NOTICE should be +provided. We request that authorship attribution be provided in any +software,documents, or other items or products that you create pursuant to the +implementation of the contents of this document, or any portion thereof. -(b) Any new file that contains any part of the Original Code or previousModifications. +No right to create modifications or derivatives of W3C documents is granted +pursuant to this license. However, if additional requirements (documented in +the Copyright FAQ) are satisfied, the right to create modifications or +derivatives is sometimes granted by the W3C to individuals complying with those +requirements. -1.7. "Original Code" means Source Code of computer software code ReferenceImplementation. +THIS DOCUMENT IS PROVIDED "AS IS," AND COPYRIGHT HOLDERS MAKE NO +REPRESENTATIONSOR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, +WARRANTIES OFMERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, +NON-INFRINGEMENT, OR TITLE;THAT THE CONTENTS OF THE DOCUMENT ARE SUITABLE FOR +ANY PURPOSE; NOR THAT THEIMPLEMENTATION OF SUCH CONTENTS WILL NOT INFRINGE ANY +THIRD PARTY PATENTS,COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS. -1.8. "Patent Claims" means any patent claim(s), now owned or hereafter acquired,including without limitation, method, process, and apparatus claims, in any patent for whichthe grantor has the right to grant a license. +COPYRIGHT HOLDERS WILL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL +ORCONSEQUENTIAL DAMAGES ARISING OUT OF ANY USE OF THE DOCUMENT OR THE +PERFORMANCEOR IMPLEMENTATION OF THE CONTENTS THEREOF. -1.9. "Reference Implementation" means the prototype or "proof of concept"implementaÂtion of the Specification developed and made available for license by or on behalf of BEA. -1.10. "Source Code" means the preferred form of the Covered Code for makingmodifications to it, including all modules it contains, plus any associated documentation,interface definition files, scripts used to control compilation and installation of an Executable, orsource code differential comparisons against either the Original Code or another well known,available Covered Code of the Contributor's choice. +The name and trademarks of copyright holders may NOT be used in advertising or +publicity pertaining to this document or its contents without specific, written +prior permission. Title to copyright in this document will at all times remain +with copyright holders. -1.11. "Specification" means the written specification for the Streaming API forXML , Java technology developed pursuant to the Java Community Process. -1.12. "Technology Compatibility Kit" or "TCK" means the documentation, testingtools and test suites associated with the Specification as may be revised by BEA from time totime, that is provided so that an implementer of the SpecifiÂcation may determine if itsimplementation is compliant with the Specification. +---------------------------------------------------------------------------- -1.13. "You" (or "Your") means an individual or a legal entity exercising rightsunder, and complying with all of the terms of, this Agreement or a future version of thisAgreement issued under Section 6.1. For legal entities, "You" includes any entity which controls,is controlled by, or is under common control with You. For purposes of this definition,"control" means (a) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (b) ownership of more than fifty percent (50%) of theoutstanding shares or beneficial ownership of such entity. +This formulation of W3C's notice and license became active on April 05 1999 so +as to account for the treatment of DTDs, schema's and bindings. See the older +formulation for the policy prior to this date. Please see our Copyright FAQ for +common questions about using materials from our site, including specific terms +and conditions for packages like libwww, Amaya, and Jigsaw. Other questions +about this notice can be directed to site-policy@w3.org. webmaster (last +updated by reagle on 1999/04/99.) -2.0 SOURCE CODE LICENSE. +%% The following software may be included in this product: Stax API; Use of any +of this software is governed by the terms of the license below: -2.1. Copyright Grant. Subject to the terms of this Agreement, each Contributorhereby grants You a non-exclusive, worldwide, royalty-free copyright license to reproduce,prepare derivative works of, publicly display, publicly perform, distribute and sublicense theCovered Code of such Contributor, if any, and such derivative works, in Source Code andExecutable form. +Streaming API for XML (JSR-173) Specification +Reference Implementation +License Agreement -2.2. Patent Grant. Subject to the terms of this Agreement, each Contributorhereby grants You a non-exclusive, worldwide, royalty-free patent license under the PatentClaims to make, use, sell, offer to sell, import and otherwise transfer the Covered Code preparedand provided by such Contributor, if any, in Source Code and Executable form. This patentlicense shall apply to the Covered Code if, at the time a Modification is added by the Contributor,such addition of the Modification causes such combination to be covered by the Patent Claims.The patent license shall not apply to any other combinations which include the Modification. -2.3. Conditions to Grants. You understand that although each Contributorgrants the licenses to the Covered Code prepared by it, no assurances are provided by anyContributor that the Covered Code does not infringe the patent or other intellectual property rights ofany other entity. Each Contributor disclaims any liability to You for claims brought by anyother entity based on infringement of intellectual property rights or otherwise. As a conditionto exercising the rights and licenses granted hereunder, You hereby assume sole responsibility to secure any other intellectual property rights needed, if any. For example, if a thirdparty patent license is required to allow You to distribute Covered Code, it is Your responsibility to acquire that license before distributing such code. +READ THE TERMS OF THIS (THE "AGREEMENT") CAREFULLY BEFORE VIEWING OR USING +THESOFTWARE LICENSED HEREUNDER. BY VIEWING OR USING THE SOFTWARE, YOU AGREE TO +THE TERMS OF THISAGREEMENT. IF YOU ARE ACCESSING THE SOFTWARE ELECTRONICALLY, +INDICATE YOUR ACCEPTANCE OF THESETERMS BY SELECTING THE "ACCEPT" BUTTON AT THE +END OF THIS AGREEMENT. IF YOU DO NOT AGREE TOALL THESE TERMS, PROMPTLY RETURN +THE UNUSED SOFTWARE TO ORIGINAL CONTRIBUTOR, DEFINED HEREIN. -2.4. Contributors' Representation. Each Contributor represents that to itsknowledge it has sufficient copyright rights in the Covered Code it provides , if any, to grantthe copyright license set forth in this Agreement. +1.0 DEFINITIONS. -3.0 DISTRIBUION RESTRICTIONS. +1.1. "BEA" means BEA Systems, Inc., the licensor of the Original Code. -3.1. Application of Agreement. +1.2. "Contributor" means BEA and each entity that creates or contributes to the +creation of Modifications. -The Modifications which You create or to which You contribute are governed bythe terms of this Agreement, including without limitation Section 2.0. The Source Code versionof Covered Code may be distributed only under the terms of this Agreement or a future versionof this Agreement released under Section 6.1, and You must include a copy of this Agreementwith every copy of the Source Code You distribute. You may not offer or impose any terms on anySource Code version that alters or restricts the applicable version of this Agreement or therecipients' rights hereunder. However, You may include an additional document offering theadditional rights described in Section 3.3. +1.3. "Covered Code" means the Original Code or Modifications or the combination +of the Original Code and Modifications, in each case including portions thereof +and corresponding documentation released with the source code. -3.2. Description of Modifications. +1.4. "Executable" means Covered Code in any form other than Source Code. -You must cause all Covered Code to which You contribute to contain a filedocumenting the changes You made to create that Covered Code and the date of any change. You mustinclude a prominent statement that the Modification is derived, directly or indirectly, fromOriginal Code provided by BEA and including the name of BEA in (a) the Source Code, and (b) inany notice in an Executable version or related documentation in which You describe the origin orownership ofthe Covered Code. +1.5. "FCS" means first commercial shipment of a product. -%% The following software may be included in this product: X Window System; Use of any of this software is governed by the terms of the license below: -Copyright The Open Group +1.6. "Modifications" means any addition to or deletion from the substance or +structure of either the Original Code or any previous Modifications. When +Covered Code is released as a series of files, a Modification is: -Permission to use, copy, modify, distribute, and sell this software and itsdocumentation for any purpose is hereby granted without fee, provided that theabove copyright notice appear in all copies and that both that copyright noticeand this permission notice appear in supporting documentation. +(a) Any addition to or deletion from the contents of a file containing Original +Code or previous Modifications. -The above copyright notice and this permission notice shall be included in allcopies or substantial portions of the Software. +(b) Any new file that contains any part of the Original Code or previous +Modifications. -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS ORIMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESSFOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE OPEN GROUPBE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OFCONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THESOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +1.7. "Original Code" means Source Code of computer software code Reference +Implementation. -Except as contained in this notice, the name of The Open Group shall not be usedin advertising or otherwise to promote the sale, use or other dealings in thisSoftware without prior written authorization from The Open Group. +1.8. "Patent Claims" means any patent claim(s), now owned or hereafter +acquired,including without limitation, method, process, and apparatus claims, in +any patent for which the grantor has the right to grant a license. -Portions also covered by other licenses as noted in the above URL. +1.9. "Reference Implementation" means the prototype or "proof of +concept"implementation of the Specification developed and made available for +license by or on behalf of BEA. -%% The following software may be included in this product: dom4j v. 1.6; Use of any of this software is governed by the terms of the license below: -Redistribution and use of this software and associated documentation -("Software"), with or without modification, are permitted provided that thefollowing conditions are met: +1.10. "Source Code" means the preferred form of the Covered Code for making +modifications to it, including all modules it contains, plus any associated +documentation,interface definition files, scripts used to control compilation +and installation of an Executable, or source code differential comparisons +against either the Original Code or another well known,available Covered Code of +the Contributor's choice. - 1. Redistributions of source code must retain copyright statements andnotices. Redistributions must also contain a copy of this document. - 2. Redistributions in binary form must reproduce the above copyright notice,this list of conditions and the following disclaimer in the documentation and/orother materials provided with the distribution. - 3. The name "DOM4J" must not be used to endorse or promote products derivedfrom this Software without prior written permission of MetaStuff, Ltd. Forwritten permission, please contact dom4j-info@metastuff.com. - 4. Products derived from this Software may not be called "DOM4J" nor may"DOM4J" appear in their names without prior written permission of MetaStuff,Ltd. DOM4J is a registered trademark of MetaStuff, Ltd. - 5. Due credit should be given to the DOM4J Project - http://www.dom4j.org -THIS SOFTWARE IS PROVIDED BY METASTUFF, LTD. AND CONTRIBUTORS ``AS IS'' AND ANYEXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIEDWARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AREDISCLAIMED. IN NO EVENT SHALL METASTUFF, LTD. OR ITS CONTRIBUTORS BE LIABLE FORANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ONANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THISSOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +1.11. "Specification" means the written specification for the Streaming API for +XML , Java technology developed pursuant to the Java Community Process. -Copyright 2001-2005 (C) MetaStuff, Ltd. All Rights Reserved. +1.12. "Technology Compatibility Kit" or "TCK" means the documentation, testing +tools and test suites associated with the Specification as may be revised by BEA +from time to time, that is provided so that an implementer of the Specification +may determine if its implementation is compliant with the Specification. -%% The following software may be included in this product: Retroweaver; Use of any of this software is governed by the terms of the license below: -Copyright (c) February 2004, Toby Reyelts -All rights reserved. +1.13. "You" (or "Your") means an individual or a legal entity exercising rights +under, and complying with all of the terms of, this Agreement or a future +version of this Agreement issued under Section 6.1. For legal entities, "You" +includes any entity which controls,is controlled by, or is under common control +with You. For purposes of this definition,"control" means (a) the power, direct +or indirect, to cause the direction or management of such entity, whether by +contract or otherwise, or (b) ownership of more than fifty percent (50%) of the +outstanding shares or beneficial ownership of such entity. -Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: +2.0 SOURCE CODE LICENSE. -Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. -Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. -Neither the name of Toby Reyelts nor the names of his contributors may be used to endorse or promote products derived from this software without specific prior written permission. +2.1. Copyright Grant. Subject to the terms of this Agreement, each Contributor +hereby grants You a non-exclusive, worldwide, royalty-free copyright license to +reproduce,prepare derivative works of, publicly display, publicly perform, +distribute and sublicense the Covered Code of such Contributor, if any, and such +derivative works, in Source Code and Executable form. + +2.2. Patent Grant. Subject to the terms of this Agreement, each Contributor +hereby grants You a non-exclusive, worldwide, royalty-free patent license under +the Patent Claims to make, use, sell, offer to sell, import and otherwise +transfer the Covered Code prepared and provided by such Contributor, if any, in +Source Code and Executable form. This patent license shall apply to the Covered +Code if, at the time a Modification is added by the Contributor,such addition of +the Modification causes such combination to be covered by the Patent Claims. +The patent license shall not apply to any other combinations which include the +Modification. + +2.3. Conditions to Grants. You understand that although each Contributor +grants the licenses to the Covered Code prepared by it, no assurances are +provided by any Contributor that the Covered Code does not infringe the patent +or other intellectual property rights of any other entity. Each Contributor +disclaims any liability to You for claims brought by any other entity based on +infringement of intellectual property rights or otherwise. As a condition to +exercising the rights and licenses granted hereunder, You hereby assume sole +responsibility to secure any other intellectual property rights needed, if any. +For example, if a thirdparty patent license is required to allow You to +distribute Covered Code, it is Your responsibility to acquire that license +before distributing such code. + +2.4. Contributors' Representation. Each Contributor represents that to its +knowledge it has sufficient copyright rights in the Covered Code it provides , +if any, to grant the copyright license set forth in this Agreement. -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICTLIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +3.0 DISTRIBUION RESTRICTIONS. -%% The following software may be included in this product: stripper; Use of any of this software is governed by the terms of the license below: -Stripper : debug information stripper -Copyright (c) 2003 Kohsuke Kawaguchi -All rights reserved. +3.1. Application of Agreement. -Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: -1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. -2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. -3. Neither the name of the copyright holders nor the names of its contributors may be used to endorse or promote products derived fromthis software without specific prior written permission. +The Modifications which You create or to which You contribute are governed by +the terms of this Agreement, including without limitation Section 2.0. The +Source Code version of Covered Code may be distributed only under the terms of +this Agreement or a future version of this Agreement released under Section 6.1, +and You must include a copy of this Agreement with every copy of the Source Code +You distribute. You may not offer or impose any terms on any Source Code +version that alters or restricts the applicable version of this Agreement or the +recipients' rights hereunder. However, You may include an additional document +offering the additional rights described in Section 3.3. + +3.2. Description of Modifications. + +You must cause all Covered Code to which You contribute to contain a file +documenting the changes You made to create that Covered Code and the date of any +change. You must include a prominent statement that the Modification is +derived, directly or indirectly, from Original Code provided by BEA and +including the name of BEA in (a) the Source Code, and (b) in any notice in an +Executable version or related documentation in which You describe the origin or +ownership of the Covered Code. + +%% The following software may be included in this product: X Window System; Use +of any of this software is governed by the terms of the license below: +Copyright The Open Group + +Permission to use, copy, modify, distribute, and sell this software and its +documentation for any purpose is hereby granted without fee, provided that the +above copyright notice appear in all copies and that both that copyright notice +and this permission notice appear in supporting documentation. + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS +ORIMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESSFOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE OPEN +GROUPBE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION +OFCONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH +THESOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + +Except as contained in this notice, the name of The Open Group shall not be used +in advertising or otherwise to promote the sale, use or other dealings in this +Software without prior written authorization from The Open Group. -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +Portions also covered by other licenses as noted in the above URL. +%% The following software may be included in this product: dom4j v. 1.6; Use +of any of this software is governed by the terms of the license below: -%% The following software may be included in this product: libpng official PNG reference library; Use of any of this software is governed by the terms of the license below: -This copy of the libpng notices is provided for your convenience. In case ofany discrepancy between this copy and the notices in the file png.h that isincluded in the libpng distribution, the latter shall prevail. +Redistribution and use of this software and associated documentation +("Software"), with or without modification, are permitted provided that the +following conditions are met: + +1. Redistributions of source code must retain copyright statements and notices +Redistributions must also contain a copy of this document. + +2. Redistributions in binary form must reproduce the above copyright +notice,this list of conditions and the following disclaimer in the documentation +and/or other materials provided with the distribution. + +3. The name "DOM4J" must not be used to endorse or promote products derived +from this Software without prior written permission of MetaStuff, Ltd. For +written permission, please contact dom4j-info@metastuff.com. + +4. Products derived from this Software may not be called "DOM4J" nor may"DOM4J" +appear in their names without prior written permission of MetaStuff,Ltd. DOM4J +is a registered trademark of MetaStuff, Ltd. + +5. Due credit should be given to the DOM4J Project - http://www.dom4j.org + +THIS SOFTWARE IS PROVIDED BY METASTUFF, LTD. AND CONTRIBUTORS ``AS IS'' AND +ANYEXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIEDWARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +AREDISCLAIMED. IN NO EVENT SHALL METASTUFF, LTD. OR ITS CONTRIBUTORS BE LIABLE +FORANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +DAMAGES(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +SERVICES;LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +AND ONANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR +TORT(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF +THISSOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +Copyright 2001-2005 (C) MetaStuff, Ltd. All Rights Reserved. + +%% The following software may be included in this product: Retroweaver; Use of +any of this software is governed by the terms of the license below: + +Copyright (c) February 2004, Toby Reyelts All rights reserved. + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +Redistributions of source code must retain the above copyright notice, this list +of conditions and the following disclaimer. Redistributions in binary form must +reproduce the above copyright notice, this list of conditions and the following +disclaimer in the documentation and/or other materials provided with the +distribution. Neither the name of Toby Reyelts nor the names of his +contributors may be used to endorse or promote products derived from this +software without specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICTLIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +%% The following software may be included in this product: stripper; Use of any +of this software is governed by the terms of the license below: + +Stripper : debug information stripper Copyright (c) 2003 Kohsuke Kawaguchi All +rights reserved. + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +1. Redistributions of source code must retain the above copyright notice, this +list of conditions and the following disclaimer. + +2. Redistributions in binary form must reproduce the above copyright notice, +this list of conditions and the following disclaimer in the documentation and/or +other materials provided with the distribution. + +3. Neither the name of the copyright holders nor the names of its contributors +may be used to endorse or promote products derived from this software without +specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + +%% The following software may be included in this product: libpng official PNG +reference library; Use of any of this software is governed by the terms of the +license below: + +This copy of the libpng notices is provided for your convenience. In case of +any discrepancy between this copy and the notices in the file png.h that is +included in the libpng distribution, the latter shall prevail. COPYRIGHT NOTICE, DISCLAIMER, and LICENSE: -If you modify libpng you may insert additional notices immediately followingthis sentence. +If you modify libpng you may insert additional notices immediately following +this sentence. -libpng version 1.2.6, December 3, 2004, is Copyright (c) 2004 Glenn Randers-Pehrson, and is distributed according to the same disclaimer and license as libpng-1.2.5with the following individual added to the list of Contributing Authors - Cosmin Truta +libpng version 1.2.6, December 3, 2004, is Copyright (c) 2004 Glenn + Randers-Pehrson, and is distributed according to the same disclaimer and + license as libpng-1.2.5with the following individual added to the list of + Contributing Authors Cosmin Truta -libpng versions 1.0.7, July 1, 2000, through 1.2.5 - October 3, 2002, are Copyright (c) 2000-2002 Glenn Randers-Pehrson, and are distributed according to the same disclaimer and license as libpng-1.0.6 with the following individuals added to the list of Contributing Authors - Simon-Pierre Cadieux - Eric S. Raymond - Gilles Vollant +libpng versions 1.0.7, July 1, 2000, through 1.2.5 - October 3, 2002, are + Copyright (c) 2000-2002 Glenn Randers-Pehrson, and are distributed according + to the same disclaimer and license as libpng-1.0.6 with the following + individuals added to the list of Contributing Authors Simon-Pierre Cadieux + Eric S. Raymond Gilles Vollant and with the following additions to the disclaimer: - There is no warranty against interference with your enjoyment of the library or against infringement. There is no warranty that our efforts or the library will fulfill any of your particular purposes or needs. This library is provided with all faults, and the entire risk of satisfactory quality, performance, accuracy, and effort is with the user. +There is no warranty against interference with your enjoyment of the library or +against infringement. There is no warranty that our efforts or the library will +fulfill any of your particular purposes or needs. This library is provided with +all faults, and the entire risk of satisfactory quality, performance, accuracy, +and effort is with the user. -libpng versions 0.97, January 1998, through 1.0.6, March 20, 2000, areCopyright (c) 1998, 1999 Glenn Randers-Pehrson, and are distributed according to the same disclaimer and license as libpng-0.96,with the following individuals added to the list of Contributing Authors: - Tom Lane - Glenn Randers-Pehrson +libpng versions 0.97, January 1998, through 1.0.6, March 20, 2000, are Copyright + (c) 1998, 1999 Glenn Randers-Pehrson, and are distributed according to the + same disclaimer and license as libpng-0.96,with the following individuals + added to the list of Contributing Authors: Tom Lane Glenn Randers-Pehrson Willem van Schaik -libpng versions 0.89, June 1996, through 0.96, May 1997, are Copyright (c) 1996, 1997 Andreas Dilger -Distributed according to the same disclaimer and license as libpng-0.88, with the following individuals added to the list of Contributing Authors: - John Bowler - Kevin Bracey - Sam Bushell - Magnus Holmgren - Greg Roelofs - Tom Tanner +libpng versions 0.89, June 1996, through 0.96, May 1997, are Copyright (c) 1996, +1997 Andreas Dilger Distributed according to the same disclaimer and license as +libpng-0.88, with the following individuals added to the list of Contributing +Authors: John Bowler Kevin Bracey Sam Bushell Magnus Holmgren Greg Roelofs Tom +Tanner -libpng versions 0.5, May 1995, through 0.88, January 1996, are Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc. +libpng versions 0.5, May 1995, through 0.88, January 1996, are Copyright (c) +1995, 1996 Guy Eric Schalnat, Group 42, Inc. -For the purposes of this copyright and license, "Contributing Authors"is defined as the following set of individuals: +For the purposes of this copyright and license, "Contributing Authors"is defined +as the following set of individuals: Andreas Dilger Dave Martindale @@ -653,46 +1488,77 @@ For the purposes of this copyright and license, "Contributing Authors"is defined Paul Schmidt Tim Wegner -The PNG Reference Library is supplied "AS IS". The Contributing Authorsand Group 42, Inc. disclaim all warranties, expressed or implied, including, without limitation, the warranties of merchantability and offitness for any purpose. The Contributing Authors and Group 42, Inc. assume no liability for direct, indirect, incidental, special, exemplary,or consequential damages, which may result from the use of the PNG Reference Library, even if advised of the possibility of such damage. +The PNG Reference Library is supplied "AS IS". The Contributing Authors and +Group 42, Inc. disclaim all warranties, expressed or implied, including, +without limitation, the warranties of merchantability and of fitness for any +purpose. The Contributing Authors and Group 42, Inc. assume no liability for +direct, indirect, incidental, special, exemplary,or consequential damages, which +may result from the use of the PNG Reference Library, even if advised of the +possibility of such damage. -Permission is hereby granted to use, copy, modify, and distribute thissource code, or portions hereof, for any purpose, without fee, subjectto the following restrictions: +Permission is hereby granted to use, copy, modify, and distribute this source +code, or portions hereof, for any purpose, without fee, subject to the following +restrictions: -1. The origin of this source code must not be misrepresented. +1. The origin of this source code must not be misrepresented. -2. Altered versions must be plainly marked as such and must not be misrepresented as being the original source. +2. Altered versions must be plainly marked as such and must not be +misrepresented as being the original source. -3. This Copyright notice may not be removed or altered from any source or altered source distribution. +3. This Copyright notice may not be removed or altered from any source or +altered source distribution. -The Contributing Authors and Group 42, Inc. specifically permit, withoutfee, and encourage the use of this source code as a component to supporting the PNG file format in commercial products. If you use thissource code in a product, acknowledgment is not required but would be appreciated. +The Contributing Authors and Group 42, Inc. specifically permit, without fee, +and encourage the use of this source code as a component to supporting the PNG +file format in commercial products. If you use this source code in a product, +acknowledgment is not required but would be appreciated. -A "png_get_copyright" function is available, for convenient use in "about"boxes and the like: +A "png_get_copyright" function is available, for convenient use in "about"boxes +and the like: printf("%s",png_get_copyright(NULL)); -Also, the PNG logo (in PNG format, of course) is supplied in the files "pngbar.png" and "pngbar.jpg (88x31) and "pngnow.png" (98x31). +Also, the PNG logo (in PNG format, of course) is supplied in the files +"pngbar.png" and "pngbar.jpg (88x31) and "pngnow.png" (98x31). -Libpng is OSI Certified Open Source Software. OSI Certified Open Source is acertification mark of the Open Source Initiative. +Libpng is OSI Certified Open Source Software. OSI Certified Open Source is a +certification mark of the Open Source Initiative. Glenn Randers-Pehrson glennrp at users.sourceforge.net December 3, 2004 -%% The following software may be included in this product: Libungif - An uncompressed GIF library; Use of any of this software is governed by the terms of the license below: -The GIFLIB distribution is Copyright (c) 1997 Eric S. Raymond +%% The following software may be included in this product: Libungif - An +uncompressed GIF library; Use of any of this software is governed by the terms +of the license below: +The GIFLIB distribution is Copyright (c) 1997 Eric S.Raymond -Permission is hereby granted, free of charge, to any person obtaining a copyof this software and associated documentation files (the "Software"), to dealin the Software without restriction, including without limitation the rightsto use, copy, modify, merge, publish, distribute, sublicense, and/or sellcopies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: +Permission is hereby granted, free of charge, to any person obtaining a copy of +this software and associated documentation files (the "Software"), to deal in +the Software without restriction, including without limitation the rights to +use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of +the Software, and to permit persons to whom the Software is furnished to do so, +subject to the following conditions: -The above copyright notice and this permission notice shall be included inall copies or substantial portions of the Software. +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS ORIMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THEAUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHERLIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS INTHE SOFTWARE. +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS +ORIMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF +MERCHANTABILITY,FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO +EVENT SHALL THEAUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR +OTHERLIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING +FROM,OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS +INTHE SOFTWARE. -%% The following software may be included in this product: Ant; Use of any of this software is governed by the terms of the license below: -License -The Apache Software License Version 2.0 +%% The following software may be included in this product: Ant; Use of any of +this software is governed by the terms of the license below: License The Apache +Software License Version 2.0 -The Apache Software License Version 2.0 applies to all releases of Ant startingwith ant 1.6.1 +The Apache Software License Version 2.0 applies to all releases of Ant starting +with ant 1.6.1 /* * Apache License @@ -911,17 +1777,20 @@ The License is accompanied by a NOTICE This product includes software developed by The Apache Software Foundation (http://www.apache.org/). - This product includes also software developed by : - - the W3C consortium (http://www.w3c.org) , - - the SAX project (http://www.saxproject.org) +This product includes also software developed by : - the W3C consortium + (http://www.w3c.org) , - the SAX project (http://www.saxproject.org) - Please read the different LICENSE files present in the root directory of this distribution. +Please read the different LICENSE files present in the root directory of this +distribution. - The names "Ant" and "Apache Software Foundation" must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact apache@apache.org. +The names "Ant" and "Apache Software Foundation" must not be used to endorse or +promote products derived from this software without prior written permission. +For written permission, please contact apache@apache.org. The Apache Software License, Version 1.1 -The Apache Software License, Version 1.1, applies to all versions of up to ant1.6.0 included. +The Apache Software License, Version 1.1, applies to all versions of up to +ant1.6.0 included. /* * ============================================================================ @@ -974,89 +1843,233 @@ The Apache Software License, Version 1.1, applies to all versions of up to ant1. */ -%% The following software may be included in this product: XML Resolver library; Use of any of this software is governed by the terms of the license below: +%% The following software may be included in this product: XML Resolver +library; Use of any of this software is governed by the terms of the license +below: + Apache License Version 2.0, January 2004 http://www.apache.org/licenses/ - TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION - - 1. Definitions. - - "License" shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1 through 9 of this document. - - "Licensor" shall mean the copyright owner or entity authorized by the copyright owner that is granting the License. - - "Legal Entity" shall mean the union of the acting entity and all other entities that control, are controlled by, or are under common control with that entity. For the purposes of this definition, "control" means (i) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (ii) ownership of fifty percent (50%) or more of the outstanding shares, or (iii) beneficial ownership of such entity. - - "You" (or "Your") shall mean an individual or Legal Entity exercising permissions granted by this License. - - "Source" form shall mean the preferred form for making modifications, including but not limited to software source code, documentation source, and configuration files. - - "Object" form shall mean any form resulting from mechanical transformation or translation of a Source form, including but not limited to compiled object code, generated documentation, and conversions to other media types. +TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION - "Work" shall mean the work of authorship, whether in Source or Object form, made available under the License, as indicated by a copyright notice that is included in or attached to the work (an example is provided in the Appendix below). + 1. Definitions. - "Derivative Works" shall mean any work, whether in Source or Object form, that is based on (or derived from) the Work and for which the editorial revisions, annotations, elaborations, or other modifications represent, as a whole, an original work of authorship. For the purposes of this License, Derivative Works shall not include works that remain separable from, or merely link (or bind by name) to the interfaces of, the Work and Derivative Works thereof. - - "Contribution" shall mean any work of authorship, including the original version of the Work and any modifications or additions to that Work or Derivative Works thereof, that is intentionally submitted to Licensor for inclusion in the Work by the copyright owner or by an individual or Legal Entity authorized to submit on behalf of the copyright owner. For the purposes of this definition, "submitted" means any form of electronic, verbal, or written communication sent to the Licensor or its representatives, including but not limited to communication on electronic mailing lists, source code control systems, and issue tracking systems that are managed by, or on behalf of, the Licensor for the purpose of discussing and improving the Work, but excluding communication that is conspicuously marked or otherwise designated in writing by the copyright owner as "Not a Contribution." - - "Contributor" shall mean Licensor and any individual or Legal Entity on behalf of whom a Contribution has been received by Licensor and subsequently incorporated within the Work. - - 2. Grant of Copyright License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable copyright license to reproduce, prepare Derivative Works of, publicly display, publicly perform, sublicense, and distribute the Work and such Derivative Works in Source or Object form. - - 3. Grant of Patent License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable (except as stated in this section) patent license to make, have made, use, offer to sell, sell, import, and otherwise transfer the Work, where such license applies only to those patent claims licensable by such Contributor that are necessarily infringed by their Contribution(s) alone or by combination of their Contribution(s) with the Work to which such Contribution(s) was submitted. If You institute patent litigation against any entity (including a cross-claim or counterclaim in a lawsuit) alleging that the Work or a Contribution incorporated within the Work constitutes direct or contributory patent infringement, then any patent licenses granted to You under this License for that Work shall terminate as of the date such litigation is filed. - - 4. Redistribution. You may reproduce and distribute copies of the Work or Derivative Works thereof in any medium, with or without modifications, and in Source or Object form, provided that You meet the following conditions: - - (a) You must give any other recipients of the Work or Derivative Works a copy of this License; and + "License" shall mean the terms and conditions for use, reproduction, + and distribution as defined by Sections 1 through 9 of this document. - (b) You must cause any modified files to carry prominent notices stating that You changed the files; and + "Licensor" shall mean the copyright owner or entity authorized by the + copyright owner that is granting the License. - (c) You must retain, in the Source form of any Derivative Works that You distribute, all copyright, patent, trademark, and attribution notices from the Source form of the Work, excluding those notices that do not pertain to any part of the Derivative Works; and + "Legal Entity" shall mean the union of the acting entity and all other + entities that control, are controlled by, or are under common control + with that entity. For the purposes of this definition, "control" means + (i) the power, direct or indirect, to cause the direction or management + of such entity, whether by contract or otherwise, or (ii) ownership of + fifty percent (50%) or more of the outstanding shares, or + (iii) beneficial ownership of such entity. - (d) If the Work includes a "NOTICE" text file as part of its distribution, then any Derivative Works that You distribute must include a readable copy of the attribution notices contained within such NOTICE file, excluding those notices that do not pertain to any part of the Derivative Works, in at least one of the following places: within a NOTICE text file distributed as part of the Derivative Works; within the Source form or -documentation, if provided along with the Derivative Works; or, within a display generated by the Derivative Works, if and wherever such third-party notices normally appear. The contents of the NOTICE file are for informational purposes only and do not modify the License. You may add Your own attribution notices within Derivative Works that You distribute, alongside or as an addendum to the NOTICE text from the Work, provided that such additional attribution notices cannot be construed as modifying the License. + "You" (or "Your") shall mean an individual or Legal Entity exercising + permissions granted by this License. - You may add Your own copyright statement to Your modifications and may provide additional or different license terms and conditions for use, reproduction, or distribution of Your modifications, or for any such Derivative Works as a whole, provided Your use, reproduction, and distribution of the Work otherwise complies with the conditions stated in this License. + "Source" form shall mean the preferred form for making modifications, + including but not limited to software source code, documentation source, + and configuration files. - 5. Submission of Contributions. Unless You explicitly state otherwise, any Contribution intentionally submitted for inclusion in the Work by You to the Licensor shall be under the terms and conditions of this License, without any additional terms or conditions. Notwithstanding the above, nothing herein shall supersede or modify the terms of any separate license agreement you may have executed with Licensor regarding such Contributions. + "Object" form shall mean any form resulting from mechanical transformation + or translation of a Source form, including but not limited to compiled + object code, generated documentation, and conversions to other media types. - 6. Trademarks. This License does not grant permission to use the trade names, trademarks, service marks, or product names of the Licensor, except as required for reasonable and customary use in describing the origin of the Work and reproducing the content of the NOTICE file. + "Work" shall mean the work of authorship, whether in Source or Object + form, made available under the License, as indicated by a copyright + notice that is included in or attached to the work (an example is + provided in the Appendix below). - 7. Disclaimer of Warranty. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License. + "Derivative Works" shall mean any work, whether in Source or Object + form, that is based on (or derived from) the Work and for which the + editorial revisions, annotations, elaborations, or other modifications + represent, as a whole, an original work of authorship. For the purposes + of this License, Derivative Works shall not include works that remain + separable from, or merely link (or bind by name) to the interfaces + of, the Work and Derivative Works thereof. + + "Contribution" shall mean any work of authorship, including the original + version of the Work and any modifications or additions to that Work or + Derivative Works thereof, that is intentionally submitted to Licensor + for inclusion in the Work by the copyright owner or by an individual + or Legal Entity authorized to submit on behalf of the copyright owner. + For the purposes of this definition, "submitted" means any form of + electronic, verbal, or written communication sent to the Licensor or + its representatives, including but not limited to communication on + electronic mailing lists, source code control systems, and issue + tracking systems that are managed by, or on behalf of, the Licensor + for the purpose of discussing and improving the Work, but excluding + communication that is conspicuously marked or otherwise designated + in writing by the copyright owner as "Not a Contribution." + + "Contributor" shall mean Licensor and any individual or Legal Entity + on behalf of whom a Contribution has been received by Licensor and + subsequently incorporated within the Work. - 8. Limitation of Liability. In no event and under no legal theory, whether in tort (including negligence), contract, or otherwise, unless required by applicable law (such as deliberate and grossly negligent acts) or agreed to in writing, shall any Contributor be liable to You for damages, including any direct, indirect, special, incidental, or consequential damages of any character arising as a result of this License or out of the use or inability to use the Work (including but not limited to damages for loss of goodwill, work stoppage, computer failure or malfunction, or any and all other commercial damages or losses), even if such Contributor has been advised of the possibility of such damages. + 2. Grant of Copyright License. Subject to the terms and conditions of + this License, each Contributor hereby grants to You a perpetual, + worldwide, non-exclusive, no-charge, royalty-free, irrevocable copyright + license to reproduce, prepare Derivative Works of, publicly display, + publicly perform, sublicense, and distribute the Work and such + Derivative Works in Source or Object form. + + 3. Grant of Patent License. Subject to the terms and conditions of this + License, each Contributor hereby grants to You a perpetual, worldwide, + non-exclusive, no-charge, royalty-free, irrevocable (except as stated + in this section) patent license to make, have made, use, offer to sell, + sell, import, and otherwise transfer the Work, where such license + applies only to those patent claims licensable by such Contributor + that are necessarily infringed by their Contribution(s) alone or by + combination of their Contribution(s) with the Work to which such + Contribution(s) was submitted. If You institute patent litigation + against any entity (including a cross-claim or counterclaim in a + lawsuit) alleging that the Work or a Contribution incorporated within + the Work constitutes direct or contributory patent infringement, then + any patent licenses granted to You under this License for that Work + shall terminate as of the date such litigation is filed. + + 4. Redistribution. You may reproduce and distribute copies of the Work + or Derivative Works thereof in any medium, with or without modifications, + and in Source or Object form, provided that You meet the following + conditions: + + (a) You must give any other recipients of the Work or Derivative Works + a copy of this License; and + + (b) You must cause any modified files to carry prominent notices + stating that You changed the files; and + + (c) You must retain, in the Source form of any Derivative Works that + You distribute, all copyright, patent, trademark, and attribution notices + from the Source form of the Work, excluding those notices that do not + pertain to any part of the Derivative Works; and + + (d) If the Work includes a "NOTICE" text file as part of its distribution, + then any Derivative Works that You distribute must include a readable copy + of the attribution notices contained within such NOTICE file, excluding + those notices that do not pertain to any part of the Derivative Works, in + at least one of the following places: within a NOTICE text file distributed + as part of the Derivative Works; within the Source form or documentation, + if provided along with the Derivative Works; or, within a display generated + by the Derivative Works, if and wherever such third-party notices normally + appear. The contents of the NOTICE file are for informational purposes only + and do not modify the License. You may add Your own attribution notices + within Derivative Works that You distribute, alongside or as an addendum to + the NOTICE text from the Work, provided that such additional attribution + notices cannot be construed as modifying the License. + + You may add Your own copyright statement to Your modifications and may provide + additional or different license terms and conditions for use, reproduction, + or distribution of Your modifications, or for any such Derivative Works as a + whole, provided Your use, reproduction, and distribution of the Work otherwise + complies with the conditions stated in this License. + + 5. Submission of Contributions. Unless You explicitly state otherwise, any + Contribution intentionally submitted for inclusion in the Work by You to + the Licensor shall be under the terms and conditions of this License, without + any additional terms or conditions. Notwithstanding the above, nothing herein + shall supersede or modify the terms of any separate license agreement you may + have executed with Licensor regarding such Contributions. + + 6. Trademarks. This License does not grant permission to use the trade names, + trademarks, service marks, or product names of the Licensor, except as required + for reasonable and customary use in describing the origin of the Work and + reproducing the content of the NOTICE file. + + 7. Disclaimer of Warranty. Unless required by applicable law or agreed to in + writing, Licensor provides the Work (and each Contributor provides its + Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF + ANY KIND, either express or implied, including, without limitation, any + warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or + FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining + the appropriateness of using or redistributing the Work and assume any + risks associated with Your exercise of permissions under this License. - 9. Accepting Warranty or Additional Liability. While redistributing the Work or Derivative Works thereof, You may choose to offer, and charge a fee for, acceptance of support, warranty, indemnity, or other liability obligations and/or rights consistent with this License. However, in accepting such obligations, You may act only on Your own behalf and on Your sole responsibility, not on behalf of any other Contributor, and only if You agree to indemnify, defend, and hold each Contributor harmless for any liability incurred by, or claims asserted against, such Contributor by reason of your accepting any such warranty or additional liability. + 8. Limitation of Liability. In no event and under no legal theory, whether + in tort (including negligence), contract, or otherwise, unless required by + applicable law (such as deliberate and grossly negligent acts) or agreed to + in writing, shall any Contributor be liable to You for damages, including + any direct, indirect, special, incidental, or consequential damages of any + character arising as a result of this License or out of the use or inability + to use the Work (including but not limited to damages for loss of goodwill, + work stoppage, computer failure or malfunction, or any and all other + commercial damages or losses), even if such Contributor has been advised + of the possibility of such damages. + + 9. Accepting Warranty or Additional Liability. While redistributing the Work + or Derivative Works thereof, You may choose to offer, and charge a fee for, + acceptance of support, warranty, indemnity, or other liability obligations + and/or rights consistent with this License. However, in accepting such + obligations, You may act only on Your own behalf and on Your sole + responsibility, not on behalf of any other Contributor, and only if You + agree to indemnify, defend, and hold each Contributor harmless for any + liability incurred by, or claims asserted against, such Contributor by + reason of your accepting any such warranty or additional liability. END OF TERMS AND CONDITIONS APPENDIX: How to apply the Apache License to your work. - To apply the Apache License to your work, attach the following boilerplate notice, with the fields enclosed by brackets "[]" replaced with your own identifying information. (Don't include the brackets!) The text should be enclosed in the appropriate comment syntax for the file format. We also recommend that a file or class name and description of purpose be included on the same "printed page" as the copyright notice for easier identification within third-party archives. + To apply the Apache License to your work, attach the following boilerplate notice, + with the fields enclosed by brackets "[]" replaced with your own identifying + information. (Don't include the brackets!) The text should be enclosed in the + appropriate comment syntax for the file format. We also recommend that a file + or class name and description of purpose be included on the same "printed page" + as the copyright notice for easier identification within third-party archives. Copyright [yyyy] [name of copyright owner] - Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at + Licensed under the Apache License, Version 2.0 (the "License"); you may not use + this file except in compliance with the License. You may obtain a copy of the + License at http://www.apache.org/licenses/LICENSE-2.0 - Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. + Unless required by applicable law or agreed to in writing, software distributed + under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR + CONDITIONS OF ANY KIND, either express or implied. See the License for the + specific language governing permissions and limitations under the License. -%% The following software may be included in this product: ICU4J; Use of any of this software is governed by the terms of the license below: -ICU License - ICU 1.8.1 and later COPYRIGHT AND PERMISSION NOTICE Cop -yright (c) -1995-2003 International Business Machines Corporation and others All rightsreserved. Permission is hereby granted, free of charge, to any person obtaininga copy of this software and associated documentation files (the "Software"), todeal in the Software without restriction, including without limitation therights to use, copy, modify, merge, publish, distribute, and/or sell copies ofthe Software, and to permit persons to whom the Software is furnished to do so,provided that the above copyright notice(s) and this permission notice appear inall copies of the Software and that both the above copyright notice(s) and thispermission notice appear in supporting documentation. THE SOFTWARE IS PROVIDED"AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOTLIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSEAND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE COPYRIGHTHOLDER OR HOLDERS INCLUDED IN THIS NOTICE BE LIABLE FOR ANY CLAIM, OR ANYSPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES WHATSOEVER RESULTINGFROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCEOR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE ORPERFORMANCE OF THIS SOFTWARE. Except as contained in this notice, the name of acopyright holder shall not be used in advertising or otherwise to promote thesale, use or other dealings in this Software without prior written authorizationof the copyright holder. +%% The following software may be included in this product: ICU4J; Use of any of +this software is governed by the terms of the license below: +ICU License - ICU 1.8.1 and later COPYRIGHT AND PERMISSION NOTICE Copyright (c) + +1995-2003 International Business Machines Corporation and others All rights + reserved Permission is hereby granted, free of charge, to any person obtaining + a copy of this software and associated documentation files (the "Software"), to + deal in the Software without restriction, including without limitation the + rights to use, copy, modify, merge, publish, distribute, and/or sell copies of + the Software, and to permit persons to whom the Software is furnished to do + so,provided that the above copyright notice(s) and this permission notice + appear in all copies of the Software and that both the above copyright + notice(s) and this permission notice appear in supporting documentation. THE + SOFTWARE IS PROVIDED"AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, + INCLUDING BUT NOTLIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A + PARTICULAR PURPOSEAND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL + THE COPYRIGHTHOLDER OR HOLDERS INCLUDED IN THIS NOTICE BE LIABLE FOR ANY CLAIM, + OR ANYSPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES WHATSOEVER + RESULTINGFROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, + NEGLIGENCEOR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE + USE ORPERFORMANCE OF THIS SOFTWARE. Except as contained in this notice, the + name of a copyright holder shall not be used in advertising or otherwise to + promote the sale, use or other dealings in this Software without prior written + authorization of the copyright holder. + + +%% The following software may be included in this product: NekoHTML; Use of any +of this software is governed by the terms of the license below: The CyberNeko +Software License, Version 1.0 -%% The following software may be included in this product: NekoHTML; Use of any of this software is governed by the terms of the license below: -The CyberNeko Software License, Version 1.0 - (C) Copyright 2002,2003, Andy Clark. All rights reserved. - + Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: @@ -1084,28 +2097,55 @@ are met: nor may "CyberNeko" appear in their name, without prior written permission of the author. -THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR OTHER CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, +INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND +FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR +OR OTHER CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, +EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT +OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING +IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY +OF SUCH DAMAGE. ==================================================================== This license is based on the Apache Software License, version 1.1 -%% The following software may be included in this product: Jing; Use of any of this software is governed by the terms of the license below: -Jing Copying Conditions - -Copyright (c) 2001-2003 Thai Open Source Software Center Ltd -All rights reserved. - -Redistribution and use in source and binary forms, with or without modification,are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice,this list of conditions and the following disclaimer. - * Redistributions in binary form must reproduce the above copyright notice,this list of conditions and the following disclaimer in the documentation and/orother materials provided with the distribution. - * Neither the name of the Thai Open Source Software Center Ltd nor the namesof its contributors may be used to endorse or promote products derived from thissoftware without specific prior written permission. +%% The following software may be included in this product: Jing; Use of any of +this software is governed by the terms of the license below: Jing Copying +Conditions -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" ANDANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIEDWARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AREDISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANYDIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ONANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THISSOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +Copyright (c) 2001-2003 Thai Open Source Software Center Ltd All rights +reserved. +Redistribution and use in source and binary forms, with or without +modification,are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + * Redistributions in binary form must reproduce the above copyright + notice,this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + * Neither the name of the Thai Open Source Software Center Ltd nor the + names of its contributors may be used to endorse or promote products + derived from this software without specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +ANDANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIEDWARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +AREDISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR +ANYDIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +DAMAGES(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +SERVICES;LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +AND ONANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR +TORT(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF +THISSOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + +%% The following software may be included in this product: RelaxNGCC; Use of +any of this software is governed by the terms of the license below: -%% The following software may be included in this product: RelaxNGCC; Use of any of this software is governed by the terms of the license below: Copyright (c) 2000-2003 Daisuke Okajima and Kohsuke Kawaguchi. All rights reserved. @@ -1138,624 +2178,235 @@ holders. nor may "RELAXNGCC" appear in their name, without prior written permission of the copyright holders. -THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.IN NO EVENT SHALL THE APACHE SOFTWARE FOUNDATION OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, -OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, -EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -%% The following software may be included in this product: RELAX NG Object Model/Parser; Use of any of this software is governed by the terms of the license below: -The MIT License +THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESSED OR IMPLIED WARRANTIES, +INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND +FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.IN NO EVENT SHALL THE APACHE +SOFTWARE FOUNDATION OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF +LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE +OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +%% The following software may be included in this product: RELAX NG Object +Model/Parser; Use of any of this software is governed by the terms of the +license below: The MIT License Copyright (c) -Permission is hereby granted, free of charge, to any person obtaining a copy ofthis software and associated documentation files (the "Software"), to deal inthe Software without restriction, including without limitation the rights touse, copy, modify, merge, publish, distribute, sublicense, and/or sell copies ofthe Software, and to permit persons to whom the Software is furnished to do so,subject to the following conditions: +Permission is hereby granted, free of charge, to any person obtaining a copy of +this software and associated documentation files (the "Software"), to deal in +the Software without restriction, including without limitation the rights to +use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of +the Software, and to permit persons to whom the Software is furnished to do +so,subject to the following conditions: -The above copyright notice and this permission notice shall be included in allcopies or substantial portions of the Software. +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS ORIMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESSFOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS ORCOPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHERIN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR INCONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS +ORIMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESSFOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS ORCOPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, +WHETHERIN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR +INCONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. -%% The following software may be included in this product: XFree86-VidMode Extension; Use of any of this software is governed by the terms of the license below: -Version 1.1 of ProjectLicence. +%% The following software may be included in this product: XFree86-VidMode +Extension; Use of any of this software is governed by the terms of the license +below: Version 1.1 of Project Licence. Copyright (C) 1994-2004 The Project, Inc. All rights reserved. - Permission is hereby granted, free of charge, to any person obtaining a copyof this software and associated documentation files (the "Software"), to deal inthe Software without restriction, including without limitation the rights touse, copy, modify, merge, publish, distribute, sublicence, and/or sell copies ofthe Software, and to permit persons to whom the Software is furnished to do so,subject to the following conditions: - - 1. Redistributions of source code must retain the above copyright notice,this list of conditions, and the following disclaimer. - 2. Redistributions in binary form must reproduce the above copyrightnotice, this list of conditions and the following disclaimer in the -documentation and/or other materials provided with the distribution, and in thesame place and form as other copyright, license and disclaimer information. 3. The end-user documentation included with the redistribution, if any,must include the following acknowledgment: "This product includes softwaredeveloped by The XFree86 Project, Inc (http://www.xfree86.org/) and itscontributors", in the same place and form as other third-party acknowledgments.Alternately, this acknowledgment may appear in the software itself, in the sameform and location as other such third-party acknowledgments. - 4. Except as contained in this notice, the name of The XFree86 Project,Inc shall not be used in advertising or otherwise to promote the sale, use orother dealings in this Software without prior written authorization from TheXFree86 Project, Inc. - - THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES,INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY ANDFITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE XFREE86PROJECT, INC OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; ORBUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER INCONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISINGIN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITYOF SUCH DAMAGE. - - -%% The following software may be included in this product: RelaxNGCC; Use of any of this software is governed by the terms of the license below: -This is version 2003-May-08 of the Info-ZIP copyright and license. -The definitive version of this document should be available at +Permission is hereby granted, free of charge, to any person obtaining a copy of +this software and associated documentation files (the "Software"), to deal in +the Software without restriction, including without limitation the rights to +use, copy, modify, merge, publish, distribute, sublicence, and/or sell copies of +the Software, and to permit persons to whom the Software is furnished to do +so,subject to the following conditions: + +1. Redistributions of source code must retain the above copyright notice,this +list of conditions, and the following disclaimer. + +2. Redistributions in binary form must reproduce the above copyright notice, +this list of conditions and the following disclaimer in the documentation and/or +other materials provided with the distribution, and in the same place and form +as other copyright, license and disclaimer information. + +3. The end-user documentation included with the redistribution, if any,must +include the following acknowledgment: "This product includes software developed +by The XFree86 Project, Inc (http://www.xfree86.org/) and its contributors", in +the same place and form as other third-party acknowledgments. Alternately, this +acknowledgment may appear in the software itself, in the same form and location +as other such third-party acknowledgments. + +4. Except as contained in this notice, the name of The XFree86 Project,Inc +shall not be used in advertising or otherwise to promote the sale, use or other +dealings in this Software without prior written authorization from TheXFree86 +Project, Inc. + +THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED +WARRANTIES,INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +MERCHANTABILITY ANDFITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT +SHALL THE XFREE86PROJECT, INC OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL,SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +BUT NOT LIMITED TO,PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +DATA, OR PROFITS; ORBUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF +LIABILITY, WHETHER INCONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE +OR OTHERWISE) ARISINGIN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED +OF THE POSSIBILITYOF SUCH DAMAGE. + + +%% The following software may be included in this product: RelaxNGCC; Use of +any of this software is governed by the terms of the license below: This is +version 2003-May-08 of the Info-ZIP copyright and license. The definitive +version of this document should be available at ftp://ftp.info-zip.org/pub/infozip/license.html indefinitely. Copyright (c) 1990-2003 Info-ZIP. All rights reserved. -For the purposes of this copyright and license, "Info-ZIP" is defined asthe following set of individuals: - - Mark Adler, John Bush, Karl Davis, Harald Denker, Jean-Michel Dubois, Jean-loup Gailly, Hunter Goatley, Ian Gorman, Chris Herborth, Dirk Haase, Greg Hartwig, Robert Heath, Jonathan Hudson, Paul Kienitz, David Kirschbaum, Johnny Lee, Onno van der Linden, Igor Mandrichenko, Steve P. Miller, Sergio Monesi, Keith Owens, George Petrov, Greg Roelofs, Kai Uwe Rommel, Steve Salisbury, Dave Smith, Christian Spieler, Antoine Verheijen, - Paul von Behren, Rich Wales, Mike White - -This software is provided "as is," without warranty of any kind, expressor implied. In no event shall Info-ZIP or its contributors be held liablefor any direct, indirect, incidental, special or consequential damagesarising out of the use of or inability to use this software. - -Permission is granted to anyone to use this software for any purpose, -including commercial applications, and to alter it and redistribute itfreely, subject to the following restrictions: - - 1. Redistributions of source code must retain the above copyright notice, definition, disclaimer, and this list of conditions. - - 2. Redistributions in binary form (compiled executables) must reproduce the above copyright notice, definition, disclaimer, and this list of conditions in documentation and/or other materials provided with the distribution. The sole exception to this condition is redistribution of a standard UnZipSFX binary (including SFXWiz) as part of a self-extracting archive; that is permitted without inclusion of this license, as long as the normal SFX banner has not been removed from the binary or disabled. - - 3. Altered versions--including, but not limited to, ports to new operating systems, existing ports with new graphical interfaces, and dynamic, shared, or static library versions--must be plainly marked as such and must not be misrepresented as being the original source. Such altered versions also must not be misrepresented as being Info-ZIP releases--including, but not limited to, labeling of the altered versions with the names "Info-ZIP" (or any variation thereof, including, but not limited to, different capitalizations), "Pocket UnZip," "WiZ" or "MacZip" without the explicit permission of Info-ZIP. Such altered versions are further prohibited from misrepresentative use of the Zip-Bugs or Info-ZIP e-mail addresses or of the Info-ZIP URL(s). - 4. Info-ZIP retains the right to use the names "Info-ZIP," "Zip," "UnZip," "UnZipSFX," "WiZ," "Pocket UnZip," "Pocket Zip," and "MacZip" for its own source and binary releases. - - -%% The following software may be included in this product: XML Security; Use of any of this software is governed by the terms of the license below: - The Apache Software License, -Version 1.1 -PDF - -Copyright (C) 2002 The Apache SoftwareFoundation. -All rights reserved. Redistribution anduse in source and binary forms, with or withoutmodifica- -tion, are permitted provided that thefollowing conditions are met: -1. Redistributions ofsource code must retain the above copyrightnotice, this list of conditions and the followingdisclaimer. -2. Redistributions in binary form mustreproduce the above copyright notice, this list of conditions and the following disclaimerin the documentation and/or other materialsprovided with the distribution. -3. The end-userdocumentation included with the redistribution, if any,must include the following acknowledgment:"This product includes software developed bythe Apache Software Foundation (http://www.apache.org/)." Alternately, this acknowledgment mayappear in the software itself, if and wherever suchthird-party acknowledgments normally appear. -4. The names"Apache Forrest" and "Apache SoftwareFoundation" must not be used to endorse or promoteproducts -derived from this software without priorwritten permission. For written permission,please contact apache@apache.org. 5. Products derivedfrom this software may not be called "Apache", normay "Apache" appear in their name, without prior written permission of the Apache Software Foundation. -THIS SOFTWARE IS PROVIDED``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT -SHALL THE APACHE SOFTWARE FOUNDATION OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT,INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS ORSERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANYTHEORY OF LIABILITY, WHETHER IN CONTRACT, STRICTLIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -This software consists of voluntary contributions made by many individuals on behalf of the Apache Software Foundation. For more information on the Apache SoftwareFoundation, please see http://www.apache.org. - - -%% The following software may be included in this product: Regexp, Regular Expression Package v. 1.2; Use of any of this software is governed by the terms of the license below: The Apache Software License, Version 1.1 -Copyright (c) 2001 The Apache Software Foundation. All rights -reserved. -Redistribution and use in source and binary forms, with or without modification,are permitted provided that the following conditions are met: - -1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. - -2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. - -3. The end-user documentation included with the redistribution, if any, must include the following acknowledgment: -"This product includes software developed by the Apache Software Foundation (http://www.apache.org/)." Alternately, this acknowledgment may appear in the software itself, if and wherever such third-party acknowledgments normally appear. - -4. The names "Apache" and "Apache Software Foundation" and "Apache Turbine" must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact apache@apache.org. - -5. Products derived from this software may not be called "Apache", "Apache Turbine", nor may "Apache" appear in their name, without prior written permission of the Apache Software Foundation. - -THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE APACHE SOFTWARE FOUNDATION OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF -USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -==================================================================== -This software consists of voluntary contributions made by many individuals on behalf of the Apache Software Foundation. For more information on the Apache Software Foundation, please see http://www.apache.org. - - -%% The following software may be included in this product: Visual Studio. Use of any of this software is governed by the terms of the license below: - -END-USER LICENSE AGREEMENT FOR MICROSOFT SOFTWARE -IMPORTANT-READ CAREFULLY: This End-User License Agreement ("EULA") is a legal agreement between you (either an individual or a single entity) and Microsoft Corporation ("Microsoft) for the Microsoft software that accompanies this EULA, which includes computer software and may include associated media, printed materials, "online" or electronic documentation, and Internet-based services ("Software"). An amendment or addendum to this EULA may accompany the Software. YOU AGREE TO BE BOUND BY THE TERMS OF THIS EULA BY INSTALLING, COPYING, OR OTHERWISE USING THE SOFTWARE. IF YOU DO NOT AGREE, DO NOT INSTALL, COPY, OR USE THE SOFTWARE; YOU MAY RETURN IT TO YOUR PLACE OF PURCHASE (IF APPLICABLE) FOR A FULL REFUND. - -MICROSOFT SOFTWARE LICENSE - -1. GRANTS OF LICENSE. Microsoft grants you the rights described in this EULA provided that you comply with all terms and conditions of this EULA. NOTE: Microsoft is not licensing to you any rights with respect to Crystal Reports for Microsoft Visual Studio .NET; your use of Crystal Reports for Microsoft Visual Studio .NET is subject to your acceptance of the terms and conditions of the enclosed (hard copy) end user license agreement from Crystal -Decisions for that product. -1.1 General License Grant. Microsoft grants to you as an individual, a personal, nonexclusive license to use the Software, and to make and use copies of the Software for the purposes of designing, developing, testing, and demonstrating your software product(s), provided that you are the only individual using the Software. If you are an entity, Microsoft grants to you a personal, nonexclusive license to use the Software, and to make and use copies of the Software, provided that for each individual using the Software within your organization, you have acquired a separate and valid license for each such individual. -1.2 Documentation. You may make and use an unlimited number of copies of any documentation, provided that such copies shall be used only for personal purposes and are not to be republished or distributed (either in hard copy or electronic form) beyond your premises. -1.3 Storage/Network Use. You may also store or install a copy of the Software on a storage device, such as a network server, used only to install or run the Software on computers used by licensed end users in accordance with Section 1.1. A single license for the Software may not be shared or used concurrently by multiple end users. -1.4 Visual Studio—Effect of EULA. As a suite of development tools and other Microsoft software programs (each such tool or software program, a "Component"), Components that you receive as part of the Software may include a separate end-user license agreement (each, a "Component EULA"). Except as provided in Section 4 ("Prerelease Code"), in the event of inconsistencies between this EULA and any Component EULA, the terms of this EULA shall control. The Software may also contain third-party software programs. Any such software is provided for your use as a convenience and your use is subject to the terms and conditions of any license agreement contained in that software. -2. ADDITIONAL LICENSE RIGHTS -- REDISTRIBUTABLE CODE. In addition to the rights granted in Section 1, certain portions of the Software, as described in this Section 2, are provided to you with additional license rights. These additional license rights are conditioned -Everett VSPro 1 -Final 11.04.02 -upon your compliance with the distribution requirements and license limitations described in -Section 3. -2.1 Sample Code. Microsoft grants you a limited, nonexclusive, royalty-free license -to: (a) use and modify the source code version of those portions of the Software identified as -"Samples" in REDIST.TXT or elsewhere in the Software ("Sample Code") for the sole purposes -of designing, developing, and testing your software product(s), and (b) reproduce and -distribute the Sample Code, along with any modifications thereof, in object and/or source code -form. For applicable redistribution requirements for Sample Code, see Section 3.1 below. -2.2 Redistributable Code—General. Microsoft grants you a limited, nonexclusive, -royalty-free license to reproduce and distribute the object code form of any portion of the -Software listed in REDIST.TXT ("Redistributable Code"). For general redistribution -requirements for Redistributable Code, see Section 3.1 below. -2.3 Redistributable Code—Microsoft Merge Modules ("MSM"). Microsoft grants -you a limited, nonexclusive, royalty-free license to reproduce and distribute the content of MSM -file(s) listed in REDIST.TXT in the manner described in the Software documentation only so -long as you redistribute such content in its entirety and do not modify such content in any way. -For all other applicable redistribution requirements for MSM files, see Section 3.1 below. -2.4 Redistributable Code—Microsoft Foundation Classes (MFC), Active Template -Libraries (ATL), and C runtimes (CRTs). In addition to the rights granted in Section 1, -Microsoft grants you a license to use and modify the source code version of those portions of -the Software that are identified as MFC, ATL, or CRTs (collectively, the "VC Redistributables"), -for the sole purposes of designing, developing, and testing your software product(s). Provided -you comply with Section 3.1 and you rename any files created by you that are included in the -Licensee Software (defined below), Microsoft grants you a limited, nonexclusive, royalty-free -license to reproduce and distribute the object code version of the VC Redistributables, including -any modifications you make. For purposes of this section, "modifications" shall mean -enhancements to the functionality of the VC Redistributables. For all other applicable -redistribution requirements for VC Redistributables, see Section 3.1 below. -3. DISTRIBUTION REQUIREMENTS AND OTHER LICENSE RIGHTS AND -LIMITATIONS. If you choose to exercise your rights under Section 2, any redistribution by -you is subject to your compliance with Section 3.1; some of the Redistributable Code has -additional limited use rights described in Section 3.2. -3.1 General Distribution Requirements. -(a) If you choose to redistribute Sample Code, or Redistributable Code -(collectively, the "Redistributables") as described in Section 2, you agree: (i) except as otherwise -noted in Section 2.1 (Sample Code), to distribute the Redistributables only in object code form -and in conjunction with and as a part of a software application product developed by you that -adds significant and primary functionality to the Redistributables ("Licensee Software"); -(ii) that the Redistributables only operate in conjunction with Microsoft Windows platforms; -(iii) that if the Licensee Software is distributed beyond Licensee's premises or externally from -Licensee's organization, to distribute the Licensee Software containing the Redistributables -pursuant to an end user license agreement (which may be "break-the-seal", "click-wrap" or -signed), with terms no less protective than those contained in this EULA; (iv) not to use -Microsoft's name, logo, or trademarks to market the Licensee Software; (v) to display your own -valid copyright notice which shall be sufficient to protect Microsoft's copyright in the Software; -Everett VSPro 2 -Final 11.04.02 -(vi) not to remove or obscure any copyright, trademark or patent notices that appear on the -Software as delivered to you; (vii) to indemnify, hold harmless, and defend Microsoft from and -against any claims or lawsuits, including attorney's fees, that arise or result from the use or -distribution of the Licensee Software; (viii) to otherwise comply with the terms of this EULA; -and (ix) agree that Microsoft reserves all rights not expressly granted. -You also agree not to permit further distribution of the Redistributables by your -end users except you may permit further redistribution of the Redistributables by your -distributors to your end-user customers if your distributors only distribute the Redistributables -in conjunction with, and as part of, the Licensee Software, you comply with all other terms of -this EULA, and your distributors comply with all restrictions of this EULA that are applicable -to you. - -(b) If you use the Redistributables, then in addition to your compliance with -the applicable distribution requirements described for the Redistributables, the following also -applies. Your license rights to the Redistributables are conditioned upon your not (i) creating -derivative works of the Redistributables in any manner that would cause the Redistributables in -whole or in part to become subject to any of the terms of an Excluded License; or (ii) -distributing the Redistributables (or derivative works thereof) in any manner that would cause -the Redistributables to become subject to any of the terms of an Excluded License. An -"Excluded License" is any license that requires as a condition of use, modification and/or -distribution of software subject to the Excluded License, that such software or other software -combined and/or distributed with such software be (x) disclosed or distributed in source code -form; (y) licensed for the purpose of making derivative works; or (z) redistributable at no -charge. -3.2 Additional Distribution Requirements for Certain Redistributable Code. -If you choose to redistribute the files discussed in this Section, then in addition to the terms of -Section 3.1, you must ALSO comply with the following. -(a) Microsoft SQL Server Desktop Engine ("MSDE"). If you redistribute -MSDE you agree to comply with the following additional requirements: (a) Licensee -Software shall not substantially duplicate the capabilities of Microsoft Access or, in the -reasonable opinion of Microsoft, compete with same; and (b) unless Licensee Software -requires your customers to license Microsoft Access in order to operate, you shall not -reproduce or use MSDE for commercial distribution in conjunction with a general -purpose word processing, spreadsheet or database management software product, or an -integrated work or product suite whose components include a general purpose word -processing, spreadsheet, or database management software product except for the -exclusive use of importing data to the various formats supported by Microsoft Access. -A product that includes limited word processing, spreadsheet or database components -along with other components which provide significant and primary value, such as an -accounting product with limited spreadsheet capability, is not considered to be a -"general purpose" product. -(b) Microsoft Data Access Components. If you redistribute the Microsoft -Data Access Component file identified as MDAC_TYP.EXE, you also agree to -redistribute such file in object code only in conjunction with and as a part of a Licensee -Software developed by you with a Microsoft development tool product that adds -significant and primary functionality to MDAC_TYP.EXE. -Everett VSPro 3 -Final 11.04.02 -3.3 Separation of Components. The Software is licensed as a single product. Its -component parts may not be separated for use by more than one user. -3.4 Benchmark Testing. The Software may contain the Microsoft .NET Framework. -You may not disclose the results of any benchmark test of the .NET Framework component of -the Software to any third party without Microsoft's prior written approval. -4. PRERELEASE CODE. Portions of the Software may be identified as prerelease code -("Prerelease Code"). Such Prerelease Code is not at the level of performance and compatibility -of the final, generally available product offering. The Prerelease Code may not operate correctly -and may be substantially modified prior to first commercial shipment. Microsoft is not -obligated to make this or any later version of the Prerelease Code commercially available. The -grant of license to use Prerelease Code expires upon availability of a commercial release of the -Prerelease Code from Microsoft. NOTE: In the event that Prerelease Code contains a separate -end-user license agreement, the terms and conditions of such end-user license agreement shall -govern your use of the corresponding Prerelease Code. -5. RESERVATION OF RIGHTS AND OWNERSHIP. Microsoft reserves all rights not -expressly granted to you in this EULA. The Software is protected by copyright and other -intellectual property laws and treaties. Microsoft or its suppliers own the title, copyright, and -other intellectual property rights in the Software. The Software is licensed, not sold. -6. LIMITATIONS ON REVERSE ENGINEERING, DECOMPILATION, AND -DISASSEMBLY. You may not reverse engineer, decompile, or disassemble the Software, -except and only to the extent that such activity is expressly permitted by applicable law -notwithstanding this limitation. -7. NO RENTAL/COMMERCIAL HOSTING. You may not rent, lease, lend or provide -commercial hosting services with the Software. -8. CONSENT TO USE OF DATA. You agree that Microsoft and its affiliates may collect -and use technical information gathered as part of the product support services provided to you, -if any, related to the Software. Microsoft may use this information solely to improve our -products or to provide customized services or technologies to you and will not disclose this -information in a form that personally identifies you. -9. LINKS TO THIRD PARTY SITES. You may link to third party sites through the use of -the Software. The third party sites are not under the control of Microsoft, and Microsoft is not -responsible for the contents of any third party sites, any links contained in third party sites, or -any changes or updates to third party sites. Microsoft is not responsible for webcasting or any -other form of transmission received from any third party sites. Microsoft is providing these -links to third party sites to you only as a convenience, and the inclusion of any link does not -imply an endorsement by Microsoft of the third party site. -10. ADDITIONAL SOFTWARE/SERVICES. This EULA applies to updates, supplements, -add-on components, or Internet-based services components, of the Software that Microsoft may -provide to you or make available to you after the date you obtain your initial copy of the -Software, unless we provide other terms along with the update, supplement, add-on -component, or Internet-based services component. Microsoft reserves the right to discontinue -any Internet-based services provided to you or made available to you through the use of the -Software. -11. UPGRADES/DOWNGRADES -Everett VSPro 4 -Final 11.04.02 -11.1 Upgrades. To use a version of the Software identified as an upgrade, you must -first be licensed for the software identified by Microsoft as eligible for the upgrade. After -upgrading, you may no longer use the software that formed the basis for your upgrade -eligibility. -11.2 Downgrades. Instead of installing and using the Software, you may install and -use copies of an earlier version of the Software, provided that you completely remove such -earlier version and install the current version of the Software within a reasonable time. Your -use of such earlier version shall be governed by this EULA, and your rights to use such earlier -version shall terminate when you install the Software. -11.3 Special Terms for Version 2003 Upgrade Editions of the Software. If the -Software accompanying this EULA is the version 2003 edition of the Software and you have -acquired it as an upgrade from the corresponding "2002" edition of the Microsoft software -product with the same product name as the Software (the "Qualifying Software"), then -Section 11.1 does not apply to you. Instead, you may continue to use the Qualifying Software -AND the version 2003 upgrade for so long as you continue to comply with the terms of this -EULA and the EULA governing your use of the Qualifying Software. Qualifying Software does -not include non-Microsoft software products. -12. NOT FOR RESALE SOFTWARE. Software identified as "Not For Resale" or "NFR," -may not be sold or otherwise transfered for value, or used for any purpose other than -demonstration, test or evaluation. -13. ACADEMIC EDITION SOFTWARE. To use Software identified as "Academic -Edition" or "AE," you must be a "Qualified Educational User." For qualification-related -questions, please contact the Microsoft Sales Information Center/One Microsoft -Way/Redmond, WA 98052-6399 or the Microsoft subsidiary serving your country. -14. EXPORT RESTRICTIONS. You acknowledge that the Software is subject to U.S. export -jurisdiction. You agree to comply with all applicable international and national laws that apply -to the Software, including the U.S. Export Administration Regulations, as well as end-user, end- -use, and destination restrictions issued by U.S. and other governments. For additional -information see <http://www.microsoft.com/exporting/>. -15. SOFTWARE TRANSFER. The initial user of the Software may make a one-time -permanent transfer of this EULA and Software to another end user, provided the initial user -retains no copies of the Software. This transfer must include all of the Software (including all -component parts, the media and printed materials, any upgrades (including any Qualifying -Software as defined in Section 11.3), this EULA, and, if applicable, the Certificate of -Authenticity). The transfer may not be an indirect transfer, such as a consignment. Prior to the -transfer, the end user receiving the Software must agree to all the EULA terms. -16. TERMINATION. Without prejudice to any other rights, Microsoft may terminate this -EULA if you fail to comply with the terms and conditions of this EULA. In such event, you -must destroy all copies of the Software and all of its component parts. -Everett VSPro 5 -Final 11.04.02 -17. LIMITED WARRANTY FOR SOFTWARE ACQUIRED IN THE US AND CANADA. -Except for the "Redistributables," which are provided AS IS without warranty of any kind, -Microsoft warrants that the Software will perform substantially in accordance with the -accompanying materials for a period of ninety (90) days from the date of receipt. - -If an implied warranty or condition is created by your state/jurisdiction and federal or -state/provincial law prohibits disclaimer of it, you also have an implied warranty or condition, -BUT ONLY AS TO DEFECTS DISCOVERED DURING THE PERIOD OF THIS LIMITED -WARRANTY (NINETY DAYS). AS TO ANY DEFECTS DISCOVERED AFTER THE -NINETY-DAY PERIOD, THERE IS NO WARRANTY OR CONDITION OF ANY KIND. - -Some states/jurisdictions do not allow limitations on how long an implied warranty or - - -condition lasts, so the above limitation may not apply to you. -Any supplements or updates to the Software, including without limitation, any (if any) service -packs or hot fixes provided to you after the expiration of the ninety day Limited Warranty -period are not covered by any warranty or condition, express, implied or statutory. - - -LIMITATION ON REMEDIES; NO CONSEQUENTIAL OR OTHER DAMAGES. Your -exclusive remedy for any breach of this Limited Warranty is as set forth below. Except for any -refund elected by Microsoft, YOU ARE NOT ENTITLED TO ANY DAMAGES, -INCLUDING BUT NOT LIMITED TO CONSEQUENTIAL DAMAGES, if the Software does -not meet Microsoft's Limited Warranty, and, to the maximum extent allowed by applicable -law, even if any remedy fails of its essential purpose. The terms of Section 19 ("Exclusion of -Incidental, Consequential and Certain Other Damages") are also incorporated into this Limited -Warranty. Some states/jurisdictions do not allow the exclusion or limitation of incidental or -consequential damages, so the above limitation or exclusion may not apply to you. This -Limited Warranty gives you specific legal rights. You may have other rights which vary from -state/jurisdiction to state/jurisdiction. YOUR EXCLUSIVE REMEDY. Microsoft's and its -suppliers' entire liability and your exclusive remedy for any breach of this Limited Warranty or -for any other breach of this EULA or for any other liability relating to the Software shall be, at -Microsoft's option from time to time exercised subject to applicable law, (a) return of the -amount paid (if any) for the Software, or (b) repair or replacement of the Software, that does not -meet this Limited Warranty and that is returned to Microsoft with a copy of your receipt. You -will receive the remedy elected by Microsoft without charge, except that you are responsible for -any expenses you may incur (e.g. cost of shipping the Software to Microsoft). This Limited -Warranty is void if failure of the Software has resulted from accident, abuse, misapplication, - -abnormal use or a virus. Any replacement Software will be warranted for the remainder of the -original warranty period or thirty (30) days, whichever is longer, and Microsoft will use -commercially reasonable efforts to provide your remedy within a commercially reasonable time -of your compliance with Microsoft's warranty remedy procedures. Outside the United States or -Canada, neither these remedies nor any product support services offered by Microsoft are -available without proof of purchase from an authorized international source. To exercise your -remedy, contact: Microsoft, Attn. Microsoft Sales Information Center/One Microsoft -Way/Redmond, WA 98052-6399, or the Microsoft subsidiary serving your country. - - -18. DISCLAIMER OF WARRANTIES. The Limited Warranty that appears above is the -only express warranty made to you and is provided in lieu of any other express warranties or -similar obligations (if any) created by any advertising, documentation, packaging, or other -communications. EXCEPT FOR THE LIMITED WARRANTY AND TO THE MAXIMUM -Everett VSPro 6 -Final 11.04.02 -EXTENT PERMITTED BY APPLICABLE LAW, MICROSOFT AND ITS SUPPLIERS -PROVIDE THE SOFTWARE AND SUPPORT SERVICES (IF ANY) AS IS AND WITH ALL -FAULTS, AND HEREBY DISCLAIM ALL OTHER WARRANTIES AND CONDITIONS, -WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, -ANY (IF ANY) IMPLIED WARRANTIES, DUTIES OR CONDITIONS OF -MERCHANTABILITY, OF FITNESS FOR A PARTICULAR PURPOSE, OF RELIABILITY -OR AVAILABILITY, OF ACCURACY OR COMPLETENESS OF RESPONSES, OF -RESULTS, OF WORKMANLIKE EFFORT, OF LACK OF VIRUSES, AND OF LACK OF -NEGLIGENCE, ALL WITH REGARD TO THE SOFTWARE, AND THE PROVISION OF OR -FAILURE TO PROVIDE SUPPORT OR OTHER SERVICES, INFORMATION, SOFTWARE, -AND RELATED CONTENT THROUGH THE SOFTWARE OR OTHERWISE ARISING -OUT OF THE USE OF THE SOFTWARE. ALSO, THERE IS NO WARRANTY OR -CONDITION OF TITLE, QUIET ENJOYMENT, QUIET POSSESSION, -CORRESPONDENCE TO DESCRIPTION OR NON-INFRINGEMENT WITH REGARD TO -THE SOFTWARE. - -19. EXCLUSION OF INCIDENTAL, CONSEQUENTIAL AND CERTAIN OTHER -DAMAGES. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO -EVENT SHALL MICROSOFT OR ITS SUPPLIERS BE LIABLE FOR ANY SPECIAL, -INCIDENTAL, PUNITIVE, INDIRECT, OR CONSEQUENTIAL DAMAGES -WHATSOEVER (INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF -PROFITS OR CONFIDENTIAL OR OTHER INFORMATION, FOR BUSINESS -INTERRUPTION, FOR PERSONAL INJURY, FOR LOSS OF PRIVACY, FOR FAILURE TO -MEET ANY DUTY INCLUDING OF GOOD FAITH OR OF REASONABLE CARE, FOR -NEGLIGENCE, AND FOR ANY OTHER PECUNIARY OR OTHER LOSS WHATSOEVER) -ARISING OUT OF OR IN ANY WAY RELATED TO THE USE OF OR INABILITY TO USE -THE SOFTWARE, THE PROVISION OF OR FAILURE TO PROVIDE SUPPORT OR -OTHER SERVICES, INFORMATION, SOFTWARE, AND RELATED CONTENT -THROUGH THE SOFTWARE OR OTHERWISE ARISING OUT OF THE USE OF THE -SOFTWARE, OR OTHERWISE UNDER OR IN CONNECTION WITH ANY PROVISION -OF THIS EULA, EVEN IN THE EVENT OF THE FAULT, TORT (INCLUDING -NEGLIGENCE), MISREPRESENTATION, STRICT LIABILITY, BREACH OF CONTRACT -OR BREACH OF WARRANTY OF MICROSOFT OR ANY SUPPLIER, AND EVEN IF -MICROSOFT OR ANY SUPPLIER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH -DAMAGES. -20. LIMITATION OF LIABILITY AND REMEDIES. NOTWITHSTANDING ANY -DAMAGES THAT YOU MIGHT INCUR FOR ANY REASON WHATSOEVER -(INCLUDING, WITHOUT LIMITATION, ALL DAMAGES REFERENCED HEREIN AND -ALL DIRECT OR GENERAL DAMAGES IN CONTRACT OR ANYTHING ELSE), THE -ENTIRE LIABILITY OF MICROSOFT AND ANY OF ITS SUPPLIERS UNDER ANY -PROVISION OF THIS EULA AND YOUR EXCLUSIVE REMEDY HEREUNDER (EXCEPT -FOR ANY REMEDY OF REPAIR OR REPLACEMENT ELECTED BY MICROSOFT WITH -RESPECT TO ANY BREACH OF THE LIMITED WARRANTY) SHALL BE LIMITED TO -THE GREATER OF THE ACTUAL DAMAGES YOU INCUR IN REASONABLE RELIANCE -ON THE SOFTWARE UP TO THE AMOUNT ACTUALLY PAID BY YOU FOR THE -SOFTWARE OR US$5.00. THE FOREGOING LIMITATIONS, EXCLUSIONS AND -DISCLAIMERS (INCLUDING SECTIONS 17, 18, AND 19) SHALL APPLY TO THE -MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, EVEN IF ANY REMEDY FAILS -ITS ESSENTIAL PURPOSE. -Everett VSPro 7 -Final 11.04.02 -21. U.S. GOVERNMENT LICENSE RIGHTS. All Software provided to the U.S. -Government pursuant to solicitations issued on or after December 1, 1995 is provided with the -commercial license rights and restrictions described elsewhere herein. All Software provided to -the U.S. Government pursuant to solicitations issued prior to December 1, 1995 is provided with -"Restricted Rights" as provided for in FAR, 48 CFR 52.227-14 (JUNE 1987) or DFAR, 48 CFR -252.227-7013 (OCT 1988), as applicable. -22. APPLICABLE LAW. If you acquired this Software in the United States, this EULA is -governed by the laws of the State of Washington. If you acquired this Software in Canada, -unless expressly prohibited by local law, this EULA is governed by the laws in force in the -Province of Ontario, Canada; and, in respect of any dispute which may arise hereunder, you -consent to the jurisdiction of the federal and provincial courts sitting in Toronto, Ontario. If you -acquired this Software in the European Union, Iceland, Norway, or Switzerland, then local law -applies. If you acquired this Software in any other country, then local law may apply. -23. ENTIRE AGREEMENT; SEVERABILITY. This EULA (including any addendum or -amendment to this EULA which is included with the Software) are the entire agreement -between you and Microsoft relating to the Software and the support services (if any) and they -supersede all prior or contemporaneous oral or written communications, proposals and -representations with respect to the Software or any other subject matter covered by this EULA. -To the extent the terms of any Microsoft policies or programs for support services conflict with -the terms of this EULA, the terms of this EULA shall control. If any provision of this EULA is -held to be void, invalid, unenforceable or illegal, the other provisions shall continue in full force -and effect. -Si vous avez acquis votre produit Microsoft au CANADA, la garantie limitée suivante -s'applique : - -GARANTIE LIMITÉE - -Sauf pur celles du "Redistributables," qui sont fournies "comme telles," Microsoft garantit que -le Logiciel fonctionnera conformément aux documents inclus pendant une période de 90 jours -suivant la date de réception. - -Si une garantie ou condition implicite est créée par votre État ou votre territoire et qu'une loifédérale ou provinciale ou d'un État en interdit le déni, vous jouissez également d'une -garantie ou condition implicite, MAIS UNIQUEMENT POUR LES DÉFAUTS DÉCOUVERTS -DURANT LA PÉRIODE DE LA PRÉSENTE GARANTIE LIMITÉE (QUATRE-VINGT-DIX -JOURS). IL N'Y A AUCUNE GARANTIE OU CONDITION DE QUELQUE NATURE QUECE SOIT QUANT AUX DÉFAUTS DÉCOUVERTS APRÈS CETTE PÉRIODE DE QUATRE- -VINGT-DIX JOURS. Certains États ou territoires ne permettent pas de limiter la durée d'une -garantie ou condition implicite de sorte que la limitation ci-dessus peut ne pas s'appliquer à -vous. - -Tous les suppléments ou toutes les mises à jour relatifs au Logiciel, notamment, les ensembles -de services ou les réparations à chaud (le cas échéant) qui vous sont fournis après l'expiration -de la période de quatre-vingt-dix jours de la garantie limitée ne sont pas couverts par quelque -garantie ou condition que ce soit, expresse, implicite ou en vertu de la loi. - -LIMITATION DES RECOURS; ABSENCE DE DOMMAGES INDIRECTS OU AUTRES. - -Votre recours exclusif pour toute violation de la présente garantie limitée est décrit ci-après. - -Sauf pour tout remboursement au choix de Microsoft, si le Logiciel ne respecte pas la - -Everett VSPro 8 -Final 11.04.02 - -garantie limitée de Microsoft et, dans la mesure maximale permise par les lois applicables, -même si tout recours n'atteint pas son but essentiel, VOUS N'AVEZ DROIT À AUCUNS -DOMMAGES, NOTAMMENT DES DOMMAGES INDIRECTS. Les termes de la -clause «Exclusion des dommages accessoires, indirects et de certains autres dommages » sontégalement intégrées à la présente garantie limitée. Certains États ou territoires ne permettent -pas l'exclusion ou la limitation des dommages indirects ou accessoires de sorte que la limitation -ou l'exclusion ci-dessus peut ne pas s'appliquer à vous. La présente garantie limitée vous donne -des droits légaux spécifiques. Vous pouvez avoir d'autres droits qui peuvent varier d'unterritoire ou d'un État à un autre. VOTRE RECOURS EXCLUSIF. La seule responsabilité -obligation de Microsoft et de ses fournisseurs et votre recours exclusif pour toute violation de -la présente garantie limitée ou pour toute autre violation du présent contrat ou pour toute autre -responsabilité relative au Logiciel seront, selon le choix de Microsoft exercé de temps à autre -sous réserve de toute loi applicable, a) le remboursement du prix payé, le cas échéant, pour le -Logiciel ou b) la réparation ou le remplacement du Logiciel qui ne respecte pas la présente -garantie limitée et qui est retourné à Microsoft avec une copie de votre reçu. Vous recevrez la -compensation choisie par Microsoft, sans frais, sauf que vous êtes responsable des dépenses que -vous pourriez engager (p. ex., les frais d'envoi du Logiciel à Microsoft). La présente garantie -limitée est nulle si la défectuosité du Logiciel est causée par un accident, un usage abusif, une -mauvaise application, un usage anormal ou un virus. Tout Logiciel de remplacement sera -garanti pour le reste de la période initiale de la garantie ou pendant trente (30) jours, selon la -plus longue entre ces deux périodes. À l'extérieur des États-Unis ou du Canada, ces recours ou -l'un quelconque des services de soutien technique offerts par Microsoft ne sont pas disponibles -sans preuve d'achat d'une source internationale autorisée. Pour exercer votre recours, vous -devez communiquer avec Microsoft et vous adresser au Microsoft Sales Information -Center/One Microsoft Way/Redmond, WA 98052-6399, ou à la filiale de Microsoft de votre -pays. - -DÉNI DE GARANTIES. La garantie limitée qui apparaît ci-dessus constitue la seule garantie -expresse qui vous est donnée et remplace toutes autres garanties expresses (s'il en est) crées par -une publicité, un document, un emballage ou une autre communication. SAUF EN CE QUI A -TRAIT À LA GARANTIE LIMITÉE ET DANS LA MESURE MAXIMALE PERMISE PAR -LES LOIS APPLICABLES, LE LOGICIEL ET LES SERVICES DE SOUTIEN TECHNIQUE -(LE CAS ÉCHÉANT) SONT FOURNIS TELS QUELS ET AVEC TOUS LES DÉFAUTS PAR -MICROSOFT ET SES FOURNISSEURS, LESQUELS PAR LES PRÉSENTES DÉNIENT -TOUTES AUTRES GARANTIES ET CONDITIONS EXPRESSES, IMPLICITES OU EN -VERTU DE LA LOI, NOTAMMENT, MAIS SANS LIMITATION, (LE CAS ÉCHÉANT) LESGARANTIES, DEVOIRS OU CONDITIONS IMPLICITES DE QUALITÉ MARCHANDE, -D'ADAPTATION À UNE FIN PARTICULIÈRE, DE FIABILITÉ OU DE DISPONIBILITÉ, -D'EXACTITUDE OU D'EXHAUSTIVITÉ DES RÉPONSES, DES RÉSULTATS, DES -EFFORTS DÉPLOYÉS SELON LES RÈGLES DE L'ART, D'ABSENCE DE VIRUS ET -D'ABSENCE DE NÉGLIGENCE, LE TOUT À L'ÉGARD DU LOGICIEL ET DE LA -PRESTATION OU DE L'OMISSION DE LA PRESTATION DES SERVICES DE SOUTIEN -TECHNIQUE OU À L'ÉGARD DE LA FOURNITURE OU DE L'OMISSION DE LA -FOURNITURE DE TOUS AUTRES SERVICES, RENSEIGNEMENTS, LOGICIELS, ET -CONTENU QUI S'Y RAPPORTE GRÂCE AU LOGICIEL OU PROVENANT AUTREMENT -DE L'UTILISATION DU LOGICIEL . PAR AILLEURS, IL N'Y A AUCUNE GARANTIE OU -CONDITION QUANT AU TITRE DE PROPRIÉTÉ, À LA JOUISSANCE OU LA -POSSESSION PAISIBLE, À LA CONCORDANCE À UNE DESCRIPTION NI QUANT À -UNE ABSENCE DE CONTREFAÇON CONCERNANT LE LOGICIEL. - -EXCLUSION DES DOMMAGES ACCESSOIRES, INDIRECTS ET DE CERTAINS AUTRES -DOMMAGES. DANS LA MESURE MAXIMALE PERMISE PAR LES LOIS APPLICABLES, -EN AUCUN CAS MICROSOFT OU SES FOURNISSEURS NE SERONT RESPONSABLES -DES DOMMAGES SPÉCIAUX, CONSÉCUTIFS, ACCESSOIRES OU INDIRECTS DE - -Everett VSPro 9 -Final 11.04.02 - -QUELQUE NATURE QUE CE SOIT (NOTAMMENT, LES DOMMAGES À L'ÉGARD DUMANQUE À GAGNER OU DE LA DIVULGATION DE RENSEIGNEMENTS -CONFIDENTIELS OU AUTRES, DE LA PERTE D'EXPLOITATION, DE BLESSURES -CORPORELLES, DE LA VIOLATION DE LA VIE PRIVÉE, DE L'OMISSION DE REMPLIR -TOUT DEVOIR, Y COMPRIS D'AGIR DE BONNE FOI OU D'EXERCER UN SOIN -RAISONNABLE, DE LA NÉGLIGENCE ET DE TOUTE AUTRE PERTE PÉCUNIAIRE OU -AUTRE PERTE DE QUELQUE NATURE QUE CE SOIT) SE RAPPORTANT DE QUELQUEMANIÈRE QUE CE SOIT À L'UTILISATION DU LOGICIEL OU À L'INCAPACITÉ DE -S'EN SERVIR, À LA PRESTATION OU À L'OMISSION DE LA PRESTATION DE -SERVICES DE SOUTIEN TECHNIQUE OU À LA FOURNITURE OU À L'OMISSION DE -LA FOURNITURE DE TOUS AUTRES SERVICES, RENSEIGNEMENTS, LOGICIELS, ET -CONTENU QUI S'Y RAPPORTE GRÂCE AU LOGICIEL OU PROVENANT AUTREMENT -DE L'UTILISATION DU LOGICIEL OU AUTREMENT AUX TERMES DE TOUTE -DISPOSITION DE LA PRÉSENTE CONVENTION OU RELATIVEMENT À UNE TELLE -DISPOSITION, MÊME EN CAS DE FAUTE, DE DÉLIT CIVIL (Y COMPRIS LANÉGLIGENCE), DE RESPONSABILITÉ STRICTE, DE VIOLATION DE CONTRAT OU DEVIOLATION DE GARANTIE DE MICROSOFT OU DE TOUT FOURNISSEUR ET MÊME -SI MICROSOFT OU TOUT FOURNISSEUR A ÉTÉ AVISÉ DE LA POSSIBILITÉ DE TELS -DOMMAGES. - -LIMITATION DE RESPONSABILITÉ ET RECOURS. MALGRÉ LES DOMMAGES QUE -VOUS PUISSIEZ SUBIR POUR QUELQUE MOTIF QUE CE SOIT (NOTAMMENT, MAISSANS LIMITATION, TOUS LES DOMMAGES SUSMENTIONNÉS ET TOUS LES -DOMMAGES DIRECTS OU GÉNÉRAUX OU AUTRES), LA SEULE RESPONSABILITÉ DE -MICROSOFT ET DE L'UN OU L'AUTRE DE SES FOURNISSEURS AUX TERMES DE -TOUTE DISPOSITION DE LA PRÉSENTE CONVENTION ET VOTRE RECOURS -EXCLUSIF À L'ÉGARD DE TOUT CE QUI PRÉCÈDE (SAUF EN CE QUI CONCERNETOUT RECOURS DE RÉPARATION OU DE REMPLACEMENT CHOISI PAR -MICROSOFT À L'ÉGARD DE TOUT MANQUEMENT À LA GARANTIE LIMITÉE) SELIMITE AU PLUS ÉLEVÉ ENTRE LES MONTANTS SUIVANTS : LE MONTANT QUE -VOUS AVEZ RÉELLEMENT PAYÉ POUR LE LOGICIEL OU 5,00 $US. LES LIMITES, -EXCLUSIONS ET DÉNIS QUI PRÉCÈDENT (Y COMPRIS LES CLAUSES CI-DESSUS), -S'APPLIQUENT DANS LA MESURE MAXIMALE PERMISE PAR LES LOIS -APPLICABLES, MÊME SI TOUT RECOURS N'ATTEINT PAS SON BUT ESSENTIEL. - -À moins que cela ne soit prohibé par le droit local applicable, la présente Convention est régie -par les lois de la province d'Ontario, Canada. Vous consentez à la compétence des tribunaux -fédéraux et provinciaux siégeant à Toronto, dans la province d'Ontario. - -Au cas où vous auriez des questions concernant cette licence ou que vous désiriez vous mettre -en rapport avec Microsoft pour quelque raison que ce soit, veuillez utiliser l'information -contenue dans le Logiciel pour contacter la filiale de Microsoft desservant votre pays, ou visitez -Microsoft sur le World Wide Web à http://www.microsoft.com. - -The following MICROSOFT GUARANTEE applies to you if you acquired this Software in -any other country: - -Statutory rights not affected -The following guarantee is not restricted to any territory and does -not affect any statutory rights that you may have from your reseller or from Microsoft if you -acquired the Software directly from Microsoft. If you acquired the Software or any support -services in Australia, New Zealand or Malaysia, please see the "Consumer rights" section -below. - -Everett VSPro 10 -Final 11.04.02 - -The guarantee -The Software is designed and offered as a general-purpose software, not for any -user's particular purpose. You accept that no Software is error free and you are strongly -advised to back-up your files regularly. Provided that you have a valid license, Microsoft -guarantees that a) for a period of 90 days from the date of receipt of your license to use the -Software or the shortest period permitted by applicable law it will perform substantially in -accordance with the written materials that accompany the Software; and b) any support services -provided by Microsoft shall be substantially as described in applicable written materials -provided to you by Microsoft and Microsoft support engineers will use reasonable efforts, care -and skill to solve any problem issues. In the event that the Software fails to comply with this -guarantee, Microsoft will either (a) repair or replace the Software or (b) return the price you -paid. This guarantee is void if failure of the Software results from accident, abuse or -misapplication. Any replacement Software will be guaranteed for the remainder of the original -guarantee period or 30 days, whichever period is longer. You agree that the above guarantee is -your sole guarantee in relation to the Software and any support services. - -Exclusion of All Other Terms -To the maximum extent permitted by applicable law and subject to -the guarantee above, Microsoft disclaims all warranties, conditions and other terms, either -express or implied (whether by statute, common law, collaterally or otherwise) including but -not limited to implied warranties of satisfactory quality and fitness for particular purpose with -respect to the Software and the written materials that accompany the Software. Any implied -warranties that cannot be excluded are limited to 90 days or to the shortest period permitted by -applicable law, whichever is greater. - -Limitation of Liability -To the maximum extent permitted by applicable law and except as -provided in the Microsoft Guarantee, Microsoft and its suppliers shall not be liable for any -damages whatsoever (including without limitation, damages for loss of business profits, -business interruption, loss of business information or other pecuniary loss) arising out of the -use or inability to use the Software, even if Microsoft has been advised of the possibility of such -damages. In any case Microsoft's entire liability under any provision of this Agreement shall be -limited to the amount actually paid by you for the Software. These limitations do not apply to -any liabilities that cannot be excluded or limited by applicable laws. - -Consumer rights -Consumers in Australia, New Zealand or Malaysia may have the benefit of -certain rights and remedies by reason of the Trade Practices Act and similar state and territory -laws in Australia, the Consumer Guarantees Act in New Zealand and the Consumer Protection -Act in Malaysia in respect of which liability cannot lawfully be modified or excluded. If you -acquired the Software in New Zealand for the purposes of a business, you confirm that the -Consumer Guarantees Act does not apply. If you acquired the Software in Australia and if -Microsoft breaches a condition or warranty implied under any law which cannot lawfully be -modified or excluded by this agreement then, to the extent permitted by law, Microsoft's -liability is limited, at Microsoft's option, to: (i) in the case of the Software: a) repairing or -replacing the Software; or b) the cost of such repair or replacement; and (ii) in the case of -support services: a) re-supply of the services; or b) the cost of having the services supplied -again. - -Everett VSPro 11 -Final 11.04.02 - -Should you have any questions concerning this EULA, or if you desire to contact Microsoft for -any reason, please use the address information enclosed in this Software to contact the -Microsoft subsidiary serving your country or visit Microsoft on the World Wide Web at -http://www.microsoft.com. - -Everett VSPro 12 -Final 11.04.02 - -%% The following software may be included in this product: zlib; Use of any of this software is governed by the terms of the license below: +For the purposes of this copyright and license, "Info-ZIP" is defined asthe +following set of individuals: + + Mark Adler, John Bush, Karl Davis, Harald Denker, Jean-Michel Dubois, Jean-loup + Gailly, Hunter Goatley, Ian Gorman, Chris Herborth, Dirk Haase, Greg Hartwig, + Robert Heath, Jonathan Hudson, Paul Kienitz, David Kirschbaum, Johnny Lee, + Onno van der Linden, Igor Mandrichenko, Steve P. Miller, Sergio Monesi, + Keith Owens, George Petrov, Greg Roelofs, Kai Uwe Rommel, Steve Salisbury, + Dave Smith, Christian Spieler, Antoine Verheijen, Paul von Behren, Rich + Wales, Mike White + +This software is provided "as is," without warranty of any kind, express or +implied. In no event shall Info-ZIP or its contributors be held liable for any +direct, indirect, incidental, special or consequential damages arising out of +the use of or inability to use this software. + +Permission is granted to anyone to use this software for any purpose, including +commercial applications, and to alter it and redistribute it freely, subject to +the following restrictions: + +1. Redistributions of source code must retain the above copyright notice, +definition, disclaimer, and this list of conditions. + +2. Redistributions in binary form (compiled executables) must reproduce the +above copyright notice, definition, disclaimer, and this list of conditions in +documentation and/or other materials provided with the distribution. The sole +exception to this condition is redistribution of a standard UnZipSFX binary +(including SFXWiz) as part of a self-extracting archive; that is permitted +without inclusion of this license, as long as the normal SFX banner has not been +removed from the binary or disabled. + +3. Altered versions--including, but not limited to, ports to new operating +systems, existing ports with new graphical interfaces, and dynamic, shared, or +static library versions--must be plainly marked as such and must not be +misrepresented as being the original source. Such altered versions also must +not be misrepresented as being Info-ZIP releases--including, but not limited to, +labeling of the altered versions with the names "Info-ZIP" (or any variation +thereof, including, but not limited to, different capitalizations), "Pocket +UnZip," "WiZ" or "MacZip" without the explicit permission of Info-ZIP. Such +altered versions are further prohibited from misrepresentative use of the +Zip-Bugs or Info-ZIP e-mail addresses or of the Info-ZIP URL(s). + +4. Info-ZIP retains the right to use the names "Info-ZIP," "Zip," "UnZip," +"UnZipSFX," "WiZ," "Pocket UnZip," "Pocket Zip," and "MacZip" for its own source +and binary releases. + + +%% The following software may be included in this product: XML Security; Use of + any of this software is governed by the terms of the license below: The + Apache Software License, Version 1.1 PDF + +Copyright (C) 2002 The Apache Software Foundation. + +All rights reserved. Redistribution and use in source and binary forms, with or +without modifica- tion, are permitted provided that the following conditions are +met: + +1. Redistributions of source code must retain the above copyright notice, this +list of conditions and the following disclaimer. + +2. Redistributions in binary form must reproduce the above copyright notice, +this list of conditions and the following disclaimer in the documentation and/or +other materials provided with the distribution. + +3. The end-user documentation included with the redistribution, if any,must +include the following acknowledgment:"This product includes software developed +by the Apache Software Foundation (http://www.apache.org/)." Alternately, this +acknowledgment may appear in the software itself, if and wherever such +third-party acknowledgments normally appear. + +4. The names"Apache Forrest" and "Apache Software Foundation" must not be used +to endorse or promote products derived from this software without prior written +permission. For written permission,please contact apache@apache.org. 5. +Products derived from this software may not be called "Apache", normay "Apache" +appear in their name, without prior written permission of the Apache Software +Foundation. THIS SOFTWARE IS PROVIDED``AS IS'' AND ANY EXPRESSED OR IMPLIED +WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +EVENT SHALL THE APACHE SOFTWARE FOUNDATION OR ITS CONTRIBUTORS BE LIABLE FOR ANY +DIRECT,INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS ORSERVICES; LOSS +OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANYTHEORY OF LIABILITY, WHETHER IN CONTRACT, STRICTLIABILITY, OR TORT (INCLUDING +NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, +EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. This software consists of +voluntary contributions made by many individuals on behalf of the Apache +Software Foundation. For more information on the Apache Software Foundation, +please see http://www.apache.org. + + +%% The following software may be included in this product: Regexp, Regular +Expression Package v. 1.2; Use of any of this software is governed by the terms +of the license below: The Apache Software License, Version 1.1 Copyright (c) +2001 The Apache Software Foundation. All rights reserved. Redistribution and +use in source and binary forms, with or without modification,are permitted +provided that the following conditions are met: + +1. Redistributions of source code must retain the above copyright notice, this +list of conditions and the following disclaimer. + +2. Redistributions in binary form must reproduce the above copyright notice, +this list of conditions and the following disclaimer in the documentation and/or +other materials provided with the distribution. + +3. The end-user documentation included with the redistribution, if any, must +include the following acknowledgment: "This product includes software developed +by the Apache Software Foundation (http://www.apache.org/)." Alternately, this +acknowledgment may appear in the software itself, if and wherever such +third-party acknowledgments normally appear. + +4. The names "Apache" and "Apache Software Foundation" and "Apache Turbine" +must not be used to endorse or promote products derived from this software +without prior written permission. For written permission, please contact +apache@apache.org. + +5. Products derived from this software may not be called "Apache", "Apache +Turbine", nor may "Apache" appear in their name, without prior written +permission of the Apache Software Foundation. + +THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, +INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND +FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE APACHE +SOFTWARE FOUNDATION OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF +LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE +OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + +This software consists of voluntary contributions made by many individuals on +behalf of the Apache Software Foundation. For more information on the Apache +Software Foundation, please see http://www.apache.org. + +======================================================================== + + +%% The following software may be included in this product: zlib; Use of any of +this software is governed by the terms of the license below: zlib.h -- interface of the 'zlib' general purpose compression library version 1.1.3, July 9th, 1998 @@ -1787,7 +2438,8 @@ zlib.h -- interface of the 'zlib' general purpose compression library (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format -%% The following software may be included in this product: Mozilla Rhino. Use of any of this software is governed by the terms of the license below: +%% The following software may be included in this product: Mozilla Rhino. Use +of any of this software is governed by the terms of the license below: * The contents of this file are subject to the Netscape Public * License Version 1.1 (the "License"); you may not use this file @@ -1825,7 +2477,8 @@ zlib.h -- interface of the 'zlib' general purpose compression library * Andrew Wason */ -%% The following software may be included in this product: Apache Derby. Use of any of this software is governed by the terms of the license below: +%% The following software may be included in this product: Apache Derby. Use +of any of this software is governed by the terms of the license below: Apache License @@ -2032,7 +2685,8 @@ zlib.h -- interface of the 'zlib' general purpose compression library limitations under the License. -%% The following software may be included in this product: 7-Zip. Use of any of this software is governed by the terms of the license below: +%% The following software may be included in this product: 7-Zip. Use of any +of this software is governed by the terms of the license below: ~~~~~ License for use and distribution @@ -2076,146 +2730,421 @@ Version 2.1, February 1999 Preamble -The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public Licenses are intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. - -This license, the Lesser General Public License, applies to some specially designated software packages--typically libraries--of the Free Software Foundation and other authors who decide to use it. You can use it too, but we suggest you first think carefully about whether this license or the ordinary General Public License is the better strategy to use in any particular case, based on the explanations below. - -When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish); that you receive source code or can get it if you want it; that you can change the software and use pieces of it in new free programs; and that you are informed that you can do these things. - -To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to surrender these rights. These restrictions translate to certain responsibilities for you if you distribute copies of the library or if you modify it. - -For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights that we gave you. You must make sure that they, too, receive or can get the source code. If you link other code with the library, you must provide complete object files to the recipients, so that they can relink them with the library after making changes to the library and recompiling it. And you must show them these terms so they know their rights. - -We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which gives you legal permission to copy, distribute and/or modify the library. - -To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the library is modified by someone else and passed on, the recipients should know that what they have is not the original version, so that the original author's reputation will not be affected by problems that might be introduced by others. - -Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a company cannot effectively restrict the users of a free program by obtaining a restrictive license from a patent holder. Therefore, we insist that any patent license obtained for a version of the library must be consistent with the full freedom of use specified in this license. - -Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This license, the GNU Lesser General Public License, applies to certain designated libraries, and is quite different from the ordinary General Public License. We use this license for certain libraries in order to permit linking those libraries into non-free programs. - -When a program is linked with a library, whether statically or using a shared library, the combination of the two is legally speaking a combined work, a derivative of the original library. The ordinary General Public License therefore permits such linking only if the entire combination fits its criteria of freedom. The Lesser General Public License permits more lax criteria for linking other code with the library. - -We call this license the "Lesser" General Public License because it does Less to protect the user's freedom than the ordinary General Public License. It also provides other free software developers Less of an advantage over competing non-free programs. These disadvantages are the reason we use the ordinary General Public License for many libraries. However, the Lesser license provides advantages in certain special circumstances. - -For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library, so that it becomes a de-facto standard. To achieve this, non-free programs must be allowed to use the library. A more frequent case is that a free library does the same job as widely used non-free libraries. In this case, there is little to gain by limiting the free library to free software only, so we use the Lesser General Public License. - -In other cases, permission to use a particular library in non-free programs enables a greater number of people to use a large body of free software. For example, permission to use the GNU C Library in non-free programs enables many more people to use the whole GNU operating system, as well as its variant, the GNU/Linux operating system. - -Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library. - -The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a "work based on the library" and a "work that uses the library". The former contains code derived from the library, whereas the latter must be combined with the library in order to run. -TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION - -0. This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public License (also called "this License"). Each licensee is addressed as "you". - -A "library" means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (which use some of those functions and data) to form executables. - -The "Library", below, refers to any such software library or work which has been distributed under these terms. A "work based on the Library" means either the Library or any derivative work under copyright law: that is to say, a work containing the Library or a portion of it, either verbatim or with modifications and/or translated straightforwardly into another language. (Hereinafter, translation is included without limitation in the term "modification".) - -"Source code" for a work means the preferred form of the work for making modifications to it. For a library, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the library. - -Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running a program using the Library is not restricted, and output from such a program is covered only if its contents constitute a work based on the Library (independent of the use of the Library in a tool for writing it). Whether that is true depends on what the Library does and what the program that uses the Library does. - -1. You may copy and distribute verbatim copies of the Library's complete source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and distribute a copy of this License along with the Library. - -You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. - -2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: - - a) The modified work must itself be a software library. - - b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change. - - c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License. - - d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility, other than as an argument passed when the facility is invoked, then you must make a good faith effort to ensure that, in the event an application does not supply such function or table, the facility still operates, and performs whatever part of its purpose remains meaningful. - - (For example, a function in a library to compute square roots has a purpose that is entirely well-defined independent of the application. Therefore, Subsection 2d requires that any application-supplied function or table used by this function must be optional: if the application does not supply it, the square root function must still compute square roots.) - - These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Library, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Library, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. - - Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Library. - - In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. - -3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary GNU General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other change in these notices. - -Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy. - -This option is useful when you wish to copy part of the code of the Library into a program that is not a library. - -4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange. - -If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place satisfies the requirement to distribute the source code, even though third parties are not compelled to copy the source along with the object code. - -5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being compiled or linked with it, is called a "work that uses the Library". Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the scope of this License. - -However, linking a "work that uses the Library" with the Library creates an executable that is a derivative of the Library (because it contains portions of the Library), rather than a "work that uses the library". The executable is therefore covered by this License. Section 6 states terms for distribution of such executables. - -When a "work that uses the Library" uses material from a header file that is part of the Library, the object code for the work may be a derivative work of the Library even though the source code is not. Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself a library. The threshold for this to be true is not precisely defined by law. - -If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and small inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it is legally a derivative work. (Executables containing this object code plus portions of the Library will still fall under Section 6.) - -Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of Section 6. Any executables containing that work also fall under Section 6, whether or not they are linked directly with the Library itself. - -6. As an exception to the Sections above, you may also combine or link a "work that uses the Library" with the Library to produce a work containing portions of the Library, and distribute that work under terms of your choice, provided that the terms permit modification of the work for the customer's own use and reverse engineering for debugging such modifications. - -You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered by this License. You must supply a copy of this License. If the work during execution displays copyright notices, you must include the copyright notice for the Library among them, as well as a reference directing the user to the copy of this License. Also, you must do one of these things: - - a) Accompany the work with the complete corresponding machine-readable source code for the Library including whatever changes were used in the work (which must be distributed under Sections 1 and 2 above); and, if the work is an executable linked with the Library, with the complete machine-readable "work that uses the Library", as object code and/or source code, so that the user can modify the Library and then relink to produce a modified executable containing the modified Library. (It is understood that the user who changes the contents of definitions files in the Library will not necessarily be able to recompile the application to use the modified definitions.) - - b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1) uses at run time a copy of the library already present on the user's computer system, rather than copying library functions into the executable, and (2) will operate properly with a modified version of the library, if the user installs one, as long as the modified version is interface-compatible with the version that the work was made with. - - c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection 6a, above, for a charge no more than the cost of performing this distribution. - - d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials from the same place. - - e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy. - -For an executable, the required form of the "work that uses the Library" must include any data and utility programs needed for reproducing the executable from it. However, as a special exception, the materials to be distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. - -It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating system. Such a contradiction means you cannot use both them and the Library together in an executable that you distribute. - -7. You may place library facilities that are a work based on the Library side-by-side in a single library together with other library facilities not covered by this License, and distribute such a combined library, provided that the separate distribution of the work based on the Library and of the other library facilities is otherwise permitted, and provided that you do these two things: - - a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other library facilities. This must be distributed under the terms of the Sections above. - - b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and explaining where to find the accompanying uncombined form of the same work. - -8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. - -9. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Library or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Library (or any work based on the Library), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Library or works based on it. - -10. Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a license from the original licensor to copy, distribute, link with or modify the Library subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties with this License. - -11. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Library at all. For example, if a patent license would not permit royalty-free redistribution of the Library by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Library. - -If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply, and the section as a whole is intended to apply in other circumstances. - -It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. - -This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. - -12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Library under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. - -13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. - -Each version is given a distinguishing version number. If the Library specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Library does not specify a license version number, you may choose any version ever published by the Free Software Foundation. - -14. If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. +The licenses for most software are designed to take away your freedom to share +and change it. By contrast, the GNU General Public Licenses are intended to +guarantee your freedom to share and change free software--to make sure the +software is free for all its users. + +This license, the Lesser General Public License, applies to some specially +designated software packages--typically libraries--of the Free Software +Foundation and other authors who decide to use it. You can use it too, but we +suggest you first think carefully about whether this license or the ordinary +General Public License is the better strategy to use in any particular case, +based on the explanations below. + +When we speak of free software, we are referring to freedom of use, not price. +Our General Public Licenses are designed to make sure that you have the freedom +to distribute copies of free software (and charge for this service if you wish); +that you receive source code or can get it if you want it; that you can change +the software and use pieces of it in new free programs; and that you are +informed that you can do these things. + +To protect your rights, we need to make restrictions that forbid distributors to +deny you these rights or to ask you to surrender these rights. These +restrictions translate to certain responsibilities for you if you distribute +copies of the library or if you modify it. + +For example, if you distribute copies of the library, whether gratis or for a +fee, you must give the recipients all the rights that we gave you. You must +make sure that they, too, receive or can get the source code. If you link other +code with the library, you must provide complete object files to the recipients, +so that they can relink them with the library after making changes to the +library and recompiling it. And you must show them these terms so they know +their rights. + +We protect your rights with a two-step method: (1) we copyright the library, +and (2) we offer you this license, which gives you legal permission to copy, +distribute and/or modify the library. + +To protect each distributor, we want to make it very clear that there is no +warranty for the free library. Also, if the library is modified by someone else +and passed on, the recipients should know that what they have is not the +original version, so that the original author's reputation will not be affected +by problems that might be introduced by others. + +Finally, software patents pose a constant threat to the existence of any free +program. We wish to make sure that a company cannot effectively restrict the +users of a free program by obtaining a restrictive license from a patent holder. +Therefore, we insist that any patent license obtained for a version of the +library must be consistent with the full freedom of use specified in this +license. + +Most GNU software, including some libraries, is covered by the ordinary GNU +General Public License. This license, the GNU Lesser General Public License, +applies to certain designated libraries, and is quite different from the +ordinary General Public License. We use this license for certain libraries in +order to permit linking those libraries into non-free programs. + +When a program is linked with a library, whether statically or using a shared +library, the combination of the two is legally speaking a combined work, a +derivative of the original library. The ordinary General Public License +therefore permits such linking only if the entire combination fits its criteria +of freedom. The Lesser General Public License permits more lax criteria for +linking other code with the library. + +We call this license the "Lesser" General Public License because it does Less to +protect the user's freedom than the ordinary General Public License. It also +provides other free software developers Less of an advantage over competing +non-free programs. These disadvantages are the reason we use the ordinary +General Public License for many libraries. However, the Lesser license provides +advantages in certain special circumstances. + +For example, on rare occasions, there may be a special need to encourage the +widest possible use of a certain library, so that it becomes a de-facto +standard. To achieve this, non-free programs must be allowed to use the +library. A more frequent case is that a free library does the same job as +widely used non-free libraries. In this case, there is little to gain by +limiting the free library to free software only, so we use the Lesser General +Public License. + +In other cases, permission to use a particular library in non-free programs +enables a greater number of people to use a large body of free software. For +example, permission to use the GNU C Library in non-free programs enables many +more people to use the whole GNU operating system, as well as its variant, the +GNU/Linux operating system. + +Although the Lesser General Public License is Less protective of the users' +freedom, it does ensure that the user of a program that is linked with the +Library has the freedom and the wherewithal to run that program using a modified +version of the Library. + +The precise terms and conditions for copying, distribution and modification +follow. Pay close attention to the difference between a "work based on the +library" and a "work that uses the library". The former contains code derived +from the library, whereas the latter must be combined with the library in order +to run. TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + +0. This License Agreement applies to any software library or other program +which contains a notice placed by the copyright holder or other authorized party +saying it may be distributed under the terms of this Lesser General Public +License (also called "this License"). Each licensee is addressed as "you". + +A "library" means a collection of software functions and/or data prepared so as +to be conveniently linked with application programs (which use some of those +functions and data) to form executables. + +The "Library", below, refers to any such software library or work which has been +distributed under these terms. A "work based on the Library" means either the +Library or any derivative work under copyright law: that is to say, a work +containing the Library or a portion of it, either verbatim or with modifications +and/or translated straightforwardly into another language. (Hereinafter, +translation is included without limitation in the term "modification".) + +"Source code" for a work means the preferred form of the work for making +modifications to it. For a library, complete source code means all the source +code for all modules it contains, plus any associated interface definition +files, plus the scripts used to control compilation and installation of the +library. + +Activities other than copying, distribution and modification are not covered by +this License; they are outside its scope. The act of running a program using +the Library is not restricted, and output from such a program is covered only if +its contents constitute a work based on the Library (independent of the use of +the Library in a tool for writing it). Whether that is true depends on what the +Library does and what the program that uses the Library does. + +1. You may copy and distribute verbatim copies of the Library's complete source +code as you receive it, in any medium, provided that you conspicuously and +appropriately publish on each copy an appropriate copyright notice and +disclaimer of warranty; keep intact all the notices that refer to this License +and to the absence of any warranty; and distribute a copy of this License along +with the Library. + +You may charge a fee for the physical act of transferring a copy, and you may at +your option offer warranty protection in exchange for a fee. + +2. You may modify your copy or copies of the Library or any portion of it, thus +forming a work based on the Library, and copy and distribute such modifications +or work under the terms of Section 1 above, provided that you also meet all of +these conditions: + +a) The modified work must itself be a software library. + +b) You must cause the files modified to carry prominent notices stating that you +changed the files and the date of any change. + +c) You must cause the whole of the work to be licensed at no charge to all third +parties under the terms of this License. + +d) If a facility in the modified Library refers to a function or a table of data +to be supplied by an application program that uses the facility, other than as +an argument passed when the facility is invoked, then you must make a good faith +effort to ensure that, in the event an application does not supply such function +or table, the facility still operates, and performs whatever part of its purpose +remains meaningful. + +(For example, a function in a library to compute square roots has a purpose that +is entirely well-defined independent of the application. Therefore, Subsection +2d requires that any application-supplied function or table used by this +function must be optional: if the application does not supply it, the square +root function must still compute square roots.) + +These requirements apply to the modified work as a whole. If identifiable +sections of that work are not derived from the Library, and can be reasonably +considered independent and separate works in themselves, then this License, and +its terms, do not apply to those sections when you distribute them as separate +works. But when you distribute the same sections as part of a whole which is a +work based on the Library, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the entire whole, +and thus to each and every part regardless of who wrote it. + +Thus, it is not the intent of this section to claim rights or contest your +rights to work written entirely by you; rather, the intent is to exercise the +right to control the distribution of derivative or collective works based on the +Library. + +In addition, mere aggregation of another work not based on the Library with the +Library (or with a work based on the Library) on a volume of a storage or +distribution medium does not bring the other work under the scope of this +License. + +3. You may opt to apply the terms of the ordinary GNU General Public License +instead of this License to a given copy of the Library. To do this, you must +alter all the notices that refer to this License, so that they refer to the +ordinary GNU General Public License, version 2, instead of to this License. (If +a newer version than version 2 of the ordinary GNU General Public License has +appeared, then you can specify that version instead if you wish.) Do not make +any other change in these notices. + +Once this change is made in a given copy, it is irreversible for that copy, so +the ordinary GNU General Public License applies to all subsequent copies and +derivative works made from that copy. + +This option is useful when you wish to copy part of the code of the Library into +a program that is not a library. + +4. You may copy and distribute the Library (or a portion or derivative of it, +under Section 2) in object code or executable form under the terms of Sections 1 +and 2 above provided that you accompany it with the complete corresponding +machine-readable source code, which must be distributed under the terms of +Sections 1 and 2 above on a medium customarily used for software interchange. + +If distribution of object code is made by offering access to copy from a +designated place, then offering equivalent access to copy the source code from +the same place satisfies the requirement to distribute the source code, even +though third parties are not compelled to copy the source along with the object +code. + +5. A program that contains no derivative of any portion of the Library, but is +designed to work with the Library by being compiled or linked with it, is called +a "work that uses the Library". Such a work, in isolation, is not a derivative +work of the Library, and therefore falls outside the scope of this License. + +However, linking a "work that uses the Library" with the Library creates an +executable that is a derivative of the Library (because it contains portions of +the Library), rather than a "work that uses the library". The executable is +therefore covered by this License. Section 6 states terms for distribution of +such executables. + +When a "work that uses the Library" uses material from a header file that is +part of the Library, the object code for the work may be a derivative work of +the Library even though the source code is not. Whether this is true is +especially significant if the work can be linked without the Library, or if the +work is itself a library. The threshold for this to be true is not precisely +defined by law. + +If such an object file uses only numerical parameters, data structure layouts +and accessors, and small macros and small inline functions (ten lines or less in +length), then the use of the object file is unrestricted, regardless of whether +it is legally a derivative work. (Executables containing this object code plus +portions of the Library will still fall under Section 6.) + +Otherwise, if the work is a derivative of the Library, you may distribute the +object code for the work under the terms of Section 6. Any executables +containing that work also fall under Section 6, whether or not they are linked +directly with the Library itself. + +6. As an exception to the Sections above, you may also combine or link a "work +that uses the Library" with the Library to produce a work containing portions of +the Library, and distribute that work under terms of your choice, provided that +the terms permit modification of the work for the customer's own use and reverse +engineering for debugging such modifications. + +You must give prominent notice with each copy of the work that the Library is +used in it and that the Library and its use are covered by this License. You +must supply a copy of this License. If the work during execution displays +copyright notices, you must include the copyright notice for the Library among +them, as well as a reference directing the user to the copy of this License. +Also, you must do one of these things: + +a) Accompany the work with the complete corresponding machine-readable source +code for the Library including whatever changes were used in the work (which +must be distributed under Sections 1 and 2 above); and, if the work is an +executable linked with the Library, with the complete machine-readable "work +that uses the Library", as object code and/or source code, so that the user can +modify the Library and then relink to produce a modified executable containing +the modified Library. (It is understood that the user who changes the contents +of definitions files in the Library will not necessarily be able to recompile +the application to use the modified definitions.) + +b) Use a suitable shared library mechanism for linking with the Library. A +suitable mechanism is one that (1) uses at run time a copy of the library +already present on the user's computer system, rather than copying library +functions into the executable, and (2) will operate properly with a modified +version of the library, if the user installs one, as long as the modified +version is interface-compatible with the version that the work was made with. + +c) Accompany the work with a written offer, valid for at least three years, to +give the same user the materials specified in Subsection 6a, above, for a charge +no more than the cost of performing this distribution. + +d) If distribution of the work is made by offering access to copy from a +designated place, offer equivalent access to copy the above specified materials +from the same place. + +e) Verify that the user has already received a copy of these materials or that +you have already sent this user a copy. + +For an executable, the required form of the "work that uses the Library" must +include any data and utility programs needed for reproducing the executable from +it. However, as a special exception, the materials to be distributed need not +include anything that is normally distributed (in either source or binary form) +with the major components (compiler, kernel, and so on) of the operating system +on which the executable runs, unless that component itself accompanies the +executable. + +It may happen that this requirement contradicts the license restrictions of +other proprietary libraries that do not normally accompany the operating system. +Such a contradiction means you cannot use both them and the Library together in +an executable that you distribute. + +7. You may place library facilities that are a work based on the Library +side-by-side in a single library together with other library facilities not +covered by this License, and distribute such a combined library, provided that +the separate distribution of the work based on the Library and of the other +library facilities is otherwise permitted, and provided that you do these two +things: + +a) Accompany the combined library with a copy of the same work based on the +Library, uncombined with any other library facilities. This must be distributed +under the terms of the Sections above. + +b) Give prominent notice with the combined library of the fact that part of it +is a work based on the Library, and explaining where to find the accompanying +uncombined form of the same work. + +8. You may not copy, modify, sublicense, link with, or distribute the Library +except as expressly provided under this License. Any attempt otherwise to copy, +modify, sublicense, link with, or distribute the Library is void, and will +automatically terminate your rights under this License. However, parties who +have received copies, or rights, from you under this License will not have their +licenses terminated so long as such parties remain in full compliance. + +9. You are not required to accept this License, since you have not signed it. +However, nothing else grants you permission to modify or distribute the Library +or its derivative works. These actions are prohibited by law if you do not +accept this License. Therefore, by modifying or distributing the Library (or +any work based on the Library), you indicate your acceptance of this License to +do so, and all its terms and conditions for copying, distributing or modifying +the Library or works based on it. + +10. Each time you redistribute the Library (or any work based on the Library), +the recipient automatically receives a license from the original licensor to +copy, distribute, link with or modify the Library subject to these terms and +conditions. You may not impose any further restrictions on the recipients' +exercise of the rights granted herein. You are not responsible for enforcing +compliance by third parties with this License. + +11. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), conditions +are imposed on you (whether by court order, agreement or otherwise) that +contradict the conditions of this License, they do not excuse you from the +conditions of this License. If you cannot distribute so as to satisfy +simultaneously your obligations under this License and any other pertinent +obligations, then as a consequence you may not distribute the Library at all. +For example, if a patent license would not permit royalty-free redistribution of +the Library by all those who receive copies directly or indirectly through you, +then the only way you could satisfy both it and this License would be to refrain +entirely from distribution of the Library. + +If any portion of this section is held invalid or unenforceable under any +particular circumstance, the balance of the section is intended to apply, and +the section as a whole is intended to apply in other circumstances. + +It is not the purpose of this section to induce you to infringe any patents or +other property right claims or to contest validity of any such claims; this +section has the sole purpose of protecting the integrity of the free software +distribution system which is implemented by public license practices. Many +people have made generous contributions to the wide range of software +distributed through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing to +distribute software through any other system and a licensee cannot impose that +choice. + +This section is intended to make thoroughly clear what is believed to be a +consequence of the rest of this License. + +12. If the distribution and/or use of the Library is restricted in certain +countries either by patents or by copyrighted interfaces, the original copyright +holder who places the Library under this License may add an explicit +geographical distribution limitation excluding those countries, so that +distribution is permitted only in or among countries not thus excluded. In such +case, this License incorporates the limitation as if written in the body of this +License. + +13. The Free Software Foundation may publish revised and/or new versions of the +Lesser General Public License from time to time. Such new versions will be +similar in spirit to the present version, but may differ in detail to address +new problems or concerns. + +Each version is given a distinguishing version number. If the Library specifies +a version number of this License which applies to it and "any later version", +you have the option of following the terms and conditions either of that version +or of any later version published by the Free Software Foundation. If the +Library does not specify a license version number, you may choose any version +ever published by the Free Software Foundation. + +14. If you wish to incorporate parts of the Library into other free programs +whose distribution conditions are incompatible with these, write to the author +to ask for permission. For software which is copyrighted by the Free Software +Foundation, write to the Free Software Foundation; we sometimes make exceptions +for this. Our decision will be guided by the two goals of preserving the free +status of all derivatives of our free software and of promoting the sharing and +reuse of software generally. NO WARRANTY -15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. +15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR +THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE +STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY +"AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, +BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A +PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE +LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF +ALL NECESSARY SERVICING, REPAIR OR CORRECTION. + +16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL +ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE +LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, +SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY +TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING +RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF +THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER +PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND +CONDITIONS -16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. -END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Libraries -If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free software that everyone can redistribute and change. You can do so by permitting redistribution under these terms (or, alternatively, under the terms of the ordinary General Public License). +If you develop a new library, and you want it to be of the greatest possible use +to the public, we recommend making it free software that everyone can +redistribute and change. You can do so by permitting redistribution under these +terms (or, alternatively, under the terms of the ordinary General Public +License). -To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found. +To apply these terms, attach the following notices to the library. It is safest +to attach them to the start of each source file to most effectively convey the +exclusion of warranty; and each file should have at least the "copyright" line +and a pointer to where the full notice is found. <one line to give the library's name and an idea of what it does.> Copyright (C) <year> <name of author> @@ -2236,7 +3165,9 @@ To apply these terms, attach the following notices to the library. It is safest Also add information on how to contact you by electronic and paper mail. -You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the library, if necessary. Here is a sample; alter the names: +You should also get your employer (if you work as a programmer) or your school, +if any, to sign a "copyright disclaimer" for the library, if necessary. Here is +a sample; alter the names: Yoyodyne, Inc., hereby disclaims all copyright interest in the library `Frob' (a library for tweaking knobs) written @@ -2441,30 +3372,49 @@ LZMA SDK is available under any of the following licenses: 3. Simplified license for unmodified code (read SPECIAL EXCEPTION) 4. Proprietary license -This means that you can select one of these four options and follow rules of that license. +This means that you can select one of these four options and follow rules of +that license. -SPECIAL EXCEPTION: Igor Pavlov, as the author of this code, expressly permit you statically or dynamically to link your code (or bind by name) to the files from LZMA SDK without subjecting your linked code to the terms of the CPL or GNU LGPL. Any modification or addition to any file in the LZMA SDK, however, is subject to the GNU LGPL or CPL terms. +SPECIAL EXCEPTION: Igor Pavlov, as the author of this code, expressly permit +you statically or dynamically to link your code (or bind by name) to the files +from LZMA SDK without subjecting your linked code to the terms of the CPL or GNU +LGPL. Any modification or addition to any file in the LZMA SDK, however, is +subject to the GNU LGPL or CPL terms. -This SPECIAL EXCEPTION allows you to use LZMA SDK in applications with proprietary code, provided you keep the LZMA SDK code unmodified. +This SPECIAL EXCEPTION allows you to use LZMA SDK in applications with +proprietary code, provided you keep the LZMA SDK code unmodified. -SPECIAL EXCEPTION #2: Igor Pavlov, as the author of this code, expressly permits you to use LZMA SDK 4.43 under the same terms and conditions contained in the License Agreement you have for any previous version of LZMA SDK developed by Igor Pavlov. +SPECIAL EXCEPTION #2: Igor Pavlov, as the author of this code, expressly +permits you to use LZMA SDK 4.43 under the same terms and conditions contained +in the License Agreement you have for any previous version of LZMA SDK developed +by Igor Pavlov. -SPECIAL EXCEPTION #2 allows holders of proprietary licenses to use latest version of LZMA SDK as update for previous versions. +SPECIAL EXCEPTION #2 allows holders of proprietary licenses to use latest +version of LZMA SDK as update for previous versions. -GNU LGPL and CPL are pretty similar and both these licenses are classified as free software licenses at http://www.gnu.org/ and OSI-approved at http://www.opensource.org/. +GNU LGPL and CPL are pretty similar and both these licenses are classified as +free software licenses at http://www.gnu.org/ and OSI-approved at +http://www.opensource.org/. LZMA SDK also is available under a proprietary license which can include: - 1. The right to modify code from the LZMA SDK without subjecting the modified code to the terms of the CPL or GNU LGPL - 2. Technical support for LZMA SDK via email +1. The right to modify code from the LZMA SDK without subjecting the modified +code to the terms of the CPL or GNU LGPL + +2. Technical support for LZMA SDK via email -To request such a proprietary license, or for any additional consultations, send an email message, using the 7-Zip support page: Send message to LZMA developer +To request such a proprietary license, or for any additional consultations, send +an email message, using the 7-Zip support page: Send message to LZMA developer -The source code of 7-Zip is released under the terms of the GNU LGPL. You can download the source code of 7-Zip at 7-Zip's Source Forge Page +The source code of 7-Zip is released under the terms of the GNU LGPL. You can +download the source code of 7-Zip at 7-Zip's Source Forge Page Additional License(s) -The license included with the software differs slightly from the version posted on the website. Specifically it includes SPECIAL EXCEPTION #3, which is not present in the license on the website. The license from the software archive follows: +The license included with the software differs slightly from the version posted +on the website. Specifically it includes SPECIAL EXCEPTION #3, which is not +present in the license on the website. The license from the software archive +follows: LICENSE ------- @@ -2479,27 +3429,37 @@ LZMA SDK is available under any of the following licenses: It means that you can select one of these four options and follow rules of that license. -1,2) GNU LGPL and CPL licenses are pretty similar and both these licenses are classified as +1,2) GNU LGPL and CPL licenses are pretty similar and both these licenses are +classified as - "Free software licenses" at http://www.gnu.org/ - "OSI-approved" at http://www.opensource.org/ 3) SPECIAL EXCEPTION -Igor Pavlov, as the author of this code, expressly permits you to statically or dynamically link your code (or bind by name) to the files from LZMA SDK without subjecting your linked code to the terms of the CPL or GNU LGPL. Any modifications or additions to files from LZMA SDK, however, -are subject to the GNU LGPL or CPL terms. +Igor Pavlov, as the author of this code, expressly permits you to statically or +dynamically link your code (or bind by name) to the files from LZMA SDK without +subjecting your linked code to the terms of the CPL or GNU LGPL. Any +modifications or additions to files from LZMA SDK, however, are subject to the +GNU LGPL or CPL terms. -SPECIAL EXCEPTION allows you to use LZMA SDK in applications with -closed code, +SPECIAL EXCEPTION allows you to use LZMA SDK in applications with closed code, while you keep LZMA SDK code unmodified. -SPECIAL EXCEPTION #2: Igor Pavlov, as the author of this code, expressly permits you to use this code under the same terms and conditions contained in the License Agreement you have for any previous version of LZMA SDK developed by Igor Pavlov. +SPECIAL EXCEPTION #2: Igor Pavlov, as the author of this code, expressly +permits you to use this code under the same terms and conditions contained in +the License Agreement you have for any previous version of LZMA SDK developed by +Igor Pavlov. -SPECIAL EXCEPTION #2 allows owners of proprietary licenses to use latest version of LZMA SDK as update for previous versions. +SPECIAL EXCEPTION #2 allows owners of proprietary licenses to use latest version +of LZMA SDK as update for previous versions. -SPECIAL EXCEPTION #3: Igor Pavlov, as the author of this code, expressly permits you to use code of the following files: BranchTypes.h, LzmaTypes.h, LzmaTest.c, LzmaStateTest.c, LzmaAlone.cpp, LzmaAlone.cs, LzmaAlone.java as public domain code. +SPECIAL EXCEPTION #3: Igor Pavlov, as the author of this code, expressly +permits you to use code of the following files: BranchTypes.h, LzmaTypes.h, +LzmaTest.c, LzmaStateTest.c, LzmaAlone.cpp, LzmaAlone.cs, LzmaAlone.java as +public domain code. 4) Proprietary license @@ -2510,502 +3470,13 @@ can include: 1) Right to modify code without subjecting modified code to the terms of the CPL or GNU LGPL 2) Technical support for code -To request such proprietary license or any additional consultations, send email message from that page:http://www.7-zip.org/support.html +To request such proprietary license or any additional consultations, send email +message from that page:http://www.7-zip.org/support.html -You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +You should have received a copy of the GNU Lesser General Public License along +with this library; if not, write to the Free Software Foundation, Inc., 59 +Temple Place, Suite 330, Boston, MA 02111-1307 USA -You should have received a copy of the Common Public License along with this library. - -*************************************************************************** - -%%The following software may be included in this product: -Active Template Library (ATL) - -Use of any of this software is governed by the terms of the license below: - -(note: search for "ATL") - -Visual Studio 2005 EULA - MICROSOFT SOFTWARE LICENSE TERMS -MICROSOFT VISUAL STUDIO 2005 PROFESSIONAL EDITION - -These license terms are an agreement between Microsoft Corporation (or based on -where you live, one of its affiliates) and you. Please read them. They apply -to the software named above, which includes the media on which you received it, -if any. The terms also apply to any Microsoft - • updates, - • supplements, - • Internet-based services, and - • support services -for this software, unless other terms accompany those items. If so, those terms -apply. - -BY USING THE SOFTWARE, YOU ACCEPT THESE TERMS. IF YOU DO NOT ACCEPT THEM, DO -NOT USE THE SOFTWARE. INSTEAD, RETURN IT TO THE RETAILER FOR A REFUND OR -CREDIT. If you cannot obtain a refund there, contact Microsoft or the Microsoft -affiliate serving your country for information about Microsoft’s refund -policies. See www.microsoft.com/worldwide. In the United States and Canada, -call (800) MICROSOFT or see www.microsoft.com/info/nareturns.htm. -AS DESCRIBED BELOW, USING SOME FEATURES ALSO OPERATES AS YOUR CONSENT TO THE -TRANSMISSION OF CERTAIN STANDARD COMPUTER INFORMATION FOR INTERNET-BASED SERVICES. - -NOTICE: APPLICATIONS AND SERVICES BUILT WITH MICROSOFT VISUAL J# 2005 WILL RUN -ONLY IN THE MICROSOFT .NET FRAMEWORK. VISUAL J# 2005 HAS BEEN INDEPENDENTLY -DEVELOPED BY MICROSOFT. IT IS NOT ENDORSED OR APPROVED BY SUN MICROSYSTEMS, INC. ------------------------------- -IF YOU COMPLY WITH THESE LICENSE TERMS, YOU HAVE THE RIGHTS BELOW FOR EACH -LICENSE YOU ACQUIRE. - -1. OVERVIEW. - -a. Software. The software includes development tools, software programs and -documentation. - -b. License Model. The software is licensed on a per user basis. - -2. INSTALLATION AND USE RIGHTS. - -a. General. One user may install and use copies of the software to design, -develop, test and demonstrate your programs. Testing does not include staging -on a server in a production environment, such as loading content prior to -production use. - -b. Included Microsoft Programs. These license terms apply to all Microsoft -programs included with the software. If the license terms with any of those -programs give you other rights that do not expressly conflict with these license -terms, you also have those rights. - -c. Third Party Programs. The software contains third party programs. The -license terms with those programs apply to your use of them. - -3. ADDITIONAL LICENSING REQUIREMENTS AND/OR USE RIGHTS. - -a. User Testing. Your end users may access the software to perform acceptance -tests on your programs. - -b. Distributable Code. The software contains code that you are permitted to -distribute in programs you develop if you comply with the terms below. - -i. Right to Use and Distribute. The code and text files listed below are -“Distributable Code.” - • REDIST.TXT Files. You may copy and distribute the object code form of code -listed in REDIST.TXT files. - • Sample Code. You may modify, copy, and distribute the source and object -code form of code marked as “sample.” - • Microsoft Merge Modules. You may copy and distribute the unmodified output -of Microsoft Merge Modules. - • MFCs, ATLs and CRTs. You may modify the source code form of Microsoft -Foundation Classes (MFCs), Active Template Libraries (ATLs), and C runtimes -(CRTs) to design, develop and test your programs, and copy and distribute the -object code form of your modified files under a new name. - • MDAC. You may copy and distribute the object code form of the MDAC_TYP.EXE -file. - • Image Library. You may copy and distribute images and animations in the -Image Library as described in the software documentation. You may also modify -that content. If you modify the content, it must be for use that is consistent -with the permitted use of the unmodified content. - • Third Party Distribution. You may permit distributors of your programs to -copy and distribute the Distributable Code as part of those programs. - -ii. Distribution Requirements. For any Distributable Code you distribute, you must - • add significant primary functionality to it in your programs; - • require distributors and external end users to agree to terms that protect -it at least as much as this agreement; - • display your valid copyright notice on your programs; and - • indemnify, defend, and hold harmless Microsoft from any claims, including -attorneys’ fees, related to the distribution or use of your programs. - -iii. Distribution Restrictions. You may not - • alter any copyright, trademark or patent notice in the Distributable Code; - • use Microsoft’s trademarks in your programs’ names or in a way that suggests -your programs come from or are endorsed by Microsoft; - • distribute Distributable Code, other than code listed in OTHER-DIST.TXT -files, to run on a platform other than the Windows platform; - • include Distributable Code in malicious, deceptive or unlawful programs; or - • modify or distribute the source code of any Distributable Code so that any -part of it becomes subject to an Excluded License. An Excluded License is one -that requires, as a condition of use, modification or distribution, that - • the code be disclosed or distributed in source code form; or - • others have the right to modify it. - -c. Additional Functionality. Microsoft may provide additional functionality for -the software. Other license terms and fees may apply. - -4. INTERNET-BASED SERVICES. Microsoft provides Internet-based services with the -software. It may change or cancel them at any time. - -a. Consent for Internet-Based Services. The software feature described below -connects to Microsoft or service provider computer systems over the Internet. -In some cases, you will not receive a separate notice when they connect. You -may switch off this feature or not use it. For more information about this -feature, see the software documentation. BY USING THIS FEATURE, YOU CONSENT TO -THE TRANSMISSION OF THIS INFORMATION. Microsoft does not use the information to -identify or contact you. - -Computer Information. The following feature uses Internet protocols, which send -to the appropriate systems computer information, such as your Internet protocol -address, the type of operating system, browser and name and version of the -software you are using, and the language code of the device where you installed -the software. Microsoft uses this information to make the Internet-based -service available to you. - • Digital Certificates. The software uses digital certificates. These -digital certificates confirm the identity of Internet users sending X.509 -standard encrypted information. The software retrieves certificates and updates -certificate revocation lists. These security features operate only when you use -the Internet. - -b. Misuse of Internet-based Services. You may not use this service in any way -that could harm it or impair anyone else’s use of it. You may not use the -service to try to gain unauthorized access to any service, data, account or -network by any means. - -5. TIME-SENSITIVE SOFTWARE. If the version of the software is a trial version, -the software will stop running either ninety days or one hundred eighty days -after you install it, depending on the trial version you have. You will receive -notice before it stops running. You may not be able to access data used with -the software when it stops running. - -6. PRODUCT KEYS. The software requires a key to install or access it. You are -responsible for the use of keys assigned to you. You should not share the keys -with third parties. - -7. MICROSOFT WINDOWS SOFTWARE. The software contains the Microsoft .NET -Framework 2.0 and Microsoft Data Access Component 2.8 SP1 software. These -software are part of Windows. The license terms for Windows apply to your use -of the .NET Framework 2.0 and Microsoft Data Access Component software. - -8. SQL SERVER BENCHMARK TESTING. You must obtain Microsoft’s prior written -approval to disclose to a third party the results of any benchmark test of the -SQL Server software that accompanies this software. - -9. MICROSOFT .NET FRAMEWORK BENCHMARK TESTING. The software includes the .NET -Framework component of the Windows operating systems (“.NET Component”). You -may conduct internal benchmark testing of the .NET Component. You may disclose -the results of any benchmark test of the .NET Component, provided that you -comply with the following terms: (1) you must disclose all the information -necessary for replication of the tests, including complete and accurate details -of your benchmark testing methodology, the test scripts/cases, tuning -parameters applied, hardware and software platforms tested, the name and version -number of any third party testing tool used to conduct the testing, and complete -source code for the benchmark suite/harness that is developed by or for you and -used to test both the .NET Component and the competing implementation(s); (2) -you must disclose the date (s) that you conducted the benchmark tests, along -with specific version information for all Microsoft software products tested, -including the .NET Component; (3) your benchmark testing was performed using all -performance tuning and best practice guidance set forth in the product -documentation and/or on Microsoft’s support web sites, and uses the latest -updates, patches and fixes available for the .NET Component and the relevant -Microsoft operating system; (4) it shall be sufficient if you make the -disclosures provided for above at a publicly available location such as a -website, so long as every public disclosure of the results of your benchmark -test expressly identifies the public site containing all required disclosures; -and (5) nothing in this provision shall be deemed to waive any other right that -you may have to conduct benchmark testing. The foregoing obligations shall not -apply to your disclosure of the results of any customized benchmark test of the -.NET Component, whereby such disclosure is made under confidentiality in -conjunction with a bid request by a prospective customer, such customer’s -application(s) are specifically tested and the results are only disclosed to -such specific customer. Notwithstanding any other agreement you may have with -Microsoft, if you disclose such benchmark test results, Microsoft shall have the -right to disclose the results of benchmark tests it conducts of your products -that compete with the .NET Component, provided it complies with the same -conditions above. - -10. SCOPE OF LICENSE. The software is licensed, not sold. This agreement only -gives you some rights to use the software. Microsoft reserves all other rights. - Unless applicable law gives you more rights despite this limitation, you may -use the software only as expressly permitted in this agreement. In doing so, -you must comply with any technical limitations in the software that only allow -you to use it in certain ways. For more information, see -www.microsoft.com/licensing/userights. You may not - • work around any technical limitations in the software; - • reverse engineer, decompile or disassemble the software, except and only to -the extent that applicable law expressly permits, despite this limitation; - • make more copies of the software than specified in this agreement or allowed -by applicable law, despite this limitation; - • publish the software for others to copy; - • rent, lease or lend the software; or - • use the software for commercial software hosting services. - -11. BACKUP COPY. You may make one backup copy of the software. You may use it -only to reinstall the software. - -12. DOCUMENTATION. Any person that has valid access to your computer or -internal network may copy and use the documentation for your internal, reference -purposes. - -13. NOT FOR RESALE SOFTWARE. You may not sell software marked as “NFR” or “Not -for Resale.” - -14. ACADEMIC EDITION SOFTWARE. You must be a “Qualified Educational User” to -use software marked as “Academic Edition” or “AE.” If you do not know whether -you are a Qualified Educational User, visit www.microsoft.com/education or -contact the Microsoft affiliate serving your country. - -15. UPGRADE. If this software is marked as an upgrade version, you may use it -only if you have a license to use the software eligible for upgrade. If you -upgrade, this software takes the place of the earlier version, and this -agreement takes the place of the agreement for that earlier version. You may -use the earlier version only as permitted in the Downgrade clause below. - -16. DOWNGRADE. You may install and use this version and an earlier version of -the software at the same time. This agreement applies to your use of the -earlier version. If the earlier version includes different components, any - -terms for those components in the agreement that comes with the earlier version -apply to your use of them. Microsoft is not obligated to supply earlier -versions to you. - -17. TRANSFER TO A THIRD PARTY. The first user of the software may transfer it, -and this agreement, directly to a third party. Before the transfer, that party -must agree that this agreement applies to the transfer and use of the software. - The first user must uninstall the software before transferring it separately -from the device. The first user may not retain any copies. - -18. EXPORT RESTRICTIONS. The software is subject to United States export laws -and regulations. You must comply with all domestic and international export -laws and regulations that apply to the software. These laws include -restrictions on destinations, end users and end use. For additional -information, see www.microsoft.com/exporting. - -19. SUPPORT SERVICES. Microsoft provides support services for the software as -described at www.support.microsoft.com/common/international.aspx. - -20. ENTIRE AGREEMENT. This agreement (including the warranty below), and the -terms for supplements, updates, Internet-based services and support services -that you use, are the entire agreement for the software and support services. - -21. APPLICABLE LAW. - -a. United States. If you acquired the software in the United States, Washington -state law governs the interpretation of this agreement and applies to claims for -breach of it, regardless of conflict of laws principles. The laws of the state -where you live govern all other claims, including claims under state consumer -protection laws, unfair competition laws, and in tort. - -b. Outside the United States. If you acquired the software in any other -country, the laws of that country apply. - -22. LEGAL EFFECT. This agreement describes certain legal rights. You may have -other rights under the laws of your state or country. You may also have rights -with respect to the party from whom you acquired the software. This agreement -does not change your rights under the laws of your state or country if the laws -of your state or country do not permit it to do so. - -23. LIMITATION ON AND EXCLUSION OF DAMAGES. YOU CAN RECOVER FROM MICROSOFT AND -ITS SUPPLIERS ONLY DIRECT DAMAGES UP TO THE AMOUNT YOU PAID FOR THE SOFTWARE. -YOU CANNOT RECOVER ANY OTHER DAMAGES, INCLUDING CONSEQUENTIAL, LOST PROFITS, -SPECIAL, INDIRECT OR INCIDENTAL DAMAGES. -This limitation applies to - • anything related to the software, services, content (including code) on -third party Internet sites, or third party programs; and - • claims for breach of contract, breach of warranty, guarantee or condition, -strict liability, negligence, or other tort to the extent permitted by -applicable law. - -It also applies even if - • repair, replacement or a refund for the software does not fully compensate -you for any losses; or - • Microsoft knew or should have known about the possibility of the damages. - -Some states do not allow the exclusion or limitation of incidental or -consequential damages, so the above limitation or exclusion may not apply to -you. They also may not apply to you because your country may not allow the -exclusion or limitation of incidental, consequential or other damages. - -************************************************************************************** -LIMITED WARRANTY -A. LIMITED WARRANTY. If you follow the instructions, the software will perform -substantially as described in the Microsoft materials that you receive in or -with the software. - -B. TERM OF WARRANTY; WARRANTY RECIPIENT; LENGTH OF ANY IMPLIED WARRANTIES. THE -LIMITED WARRANTY COVERS THE SOFTWARE FOR ONE YEAR AFTER ACQUIRED BY THE FIRST -USER. IF YOU RECEIVE SUPPLEMENTS, UPDATES, OR REPLACEMENT SOFTWARE DURING THAT -YEAR, THEY WILL BE COVERED FOR THE REMAINDER OF THE WARRANTY OR 30 DAYS, -WHICHEVER IS LONGER. If the first user transfers the software, the remainder of -the warranty will apply to the recipient. -TO THE EXTENT PERMITTED BY LAW, ANY IMPLIED WARRANTIES, GUARANTEES OR CONDITIONS -LAST ONLY DURING THE TERM OF THE LIMITED WARRANTY. Some states do not allow -limitations on how long an implied warranty lasts, so these limitations may not -apply to you. They also might not apply to you because some countries may not -allow limitations on how long an implied warranty, guarantee or condition lasts. - -C. EXCLUSIONS FROM WARRANTY. This warranty does not cover problems caused by -your acts (or failures to act), the acts of others, or events beyond Microsoft’s -reasonable control. - -D. REMEDY FOR BREACH OF WARRANTY. MICROSOFT WILL REPAIR OR REPLACE THE SOFTWARE -AT NO CHARGE. IF MICROSOFT CANNOT REPAIR OR REPLACE IT, MICROSOFT WILL REFUND -THE AMOUNT SHOWN ON YOUR RECEIPT FOR THE SOFTWARE. IT WILL ALSO REPAIR OR -REPLACE SUPPLEMENTS, UPDATES AND REPLACEMENT SOFTWARE AT NO CHARGE. IF -MICROSOFT CANNOT REPAIR OR REPLACE THEM, IT WILL REFUND THE AMOUNT YOU PAID FOR -THEM, IF ANY. YOU MUST UNINSTALL THE SOFTWARE AND RETURN ANY MEDIA AND OTHER -ASSOCIATED MATERIALS TO MICROSOFT WITH PROOF OF PURCHASE TO OBTAIN A REFUND. -THESE ARE YOUR ONLY REMEDIES FOR BREACH OF THE LIMITED WARRANTY. - -E. CONSUMER RIGHTS NOT AFFECTED. YOU MAY HAVE ADDITIONAL CONSUMER RIGHTS UNDER -YOUR LOCAL LAWS, WHICH THIS AGREEMENT CANNOT CHANGE. - -F. WARRANTY PROCEDURES. You need proof of purchase for warranty service. - -1. United States and Canada. For warranty service or information about how to -obtain a refund for software acquired in the United States and Canada, contact -Microsoft at - • (800) MICROSOFT; - • Microsoft Customer Service and Support, One Microsoft Way, Redmond, WA -98052-6399; or - • visit www.microsoft.com/info/nareturns.htm. - -2. Europe, Middle East and Africa. If you acquired the software in Europe, the -Middle East or Africa, Microsoft Ireland Operations Limited makes this limited -warranty. To make a claim under this warranty, you should contact either - • Microsoft Ireland Operations Limited, Customer Care Centre, Atrium Building -Block B, Carmanhall Road, Sandyford Industrial Estate, Dublin 18, Ireland; or - • the Microsoft affiliate serving your country (see www.microsoft.com/worldwide). - -3. Outside United States, Canada, Europe, Middle East and Africa. If you -acquired the software outside the United States, Canada, Europe, the Middle East -and Africa, contact the Microsoft affiliate serving your country (see -www.microsoft.com/worldwide). - -G. NO OTHER WARRANTIES. THE LIMITED WARRANTY IS THE ONLY DIRECT WARRANTY FROM -MICROSOFT. MICROSOFT GIVES NO OTHER EXPRESS WARRANTIES, GUARANTEES OR -CONDITIONS. WHERE ALLOWED BY YOUR LOCAL LAWS, MICROSOFT EXCLUDES IMPLIED -WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND -NON-INFRINGEMENT. If your local laws give you any implied warranties, -guarantees or conditions, despite this exclusion, your remedies are described in -the Remedy for Breach of Warranty clause above, to the extent permitted by your -local laws. - -H. LIMITATION ON AND EXCLUSION OF DAMAGES FOR BREACH OF WARRANTY. THE -LIMITATION ON AND EXCLUSION OF DAMAGES CLAUSE ABOVE APPLIES TO BREACHES OF THIS -LIMITED WARRANTY. - -THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER -RIGHTS WHICH VARY FROM STATE TO STATE. YOU MAY ALSO HAVE OTHER RIGHTS WHICH -VARY FROM COUNTRY TO COUNTRY. - -Please note: As this software is distributed in Quebec, Canada, some of the -clauses in this agreement are provided below in French. - -Remarque : Ce logiciel étant distribué au Québec, Canada, certaines des clauses -dans ce contrat sont fournies ci-dessous en français. - -GARANTIE LIMITÉE - -A. GARANTIE LIMITÉE. Si vous suivez les instructions, le logiciel fonctionnera -dans son ensemble comme il est décrit dans la documentation de Microsoft reçue -avec ou dans le logiciel. - -B. DURÉE DE LA GARANTIE ; BÉNÉFICIAIRE DE LA GARANTIE ; DURÉE DE TOUTE GARANTIE -IMPLICITE. La garantie limitée couvre le logiciel pendant un an après son -acquisition par le premier utilisateur. Si vous recevez des compléments, des -mises à jour ou un logiciel de remplacement au cours de cette année, ils seront -couverts par la garantie pendant la durée restante ou pendant 30 jours, la -période la plus longue étant retenue. Si le premier utilisateur transfère le -logiciel, la durée restante de la garantie s’applique au destinataire. -Dans la limite autorisée par la loi en vigueur, toute garantie ou condition -implicite dont vous bénéficiez prendra fin au terme de la garantie limitée. -Certains États n’autorisent pas les limitations portant sur la durée d’une -garantie implicite, de sorte que les limitations ci-dessus peuvent ne pas vous -être applicables. Elles peuvent également ne pas vous être applicables, car -certains pays n’autorisent pas les limitations portant sur la durée d’une -garantie ou condition implicite. - -C. EXCLUSIONS DE LA GARANTIE. Cette garantie ne couvre pas les problèmes -engendrés par vos propres actes (ou absences d’actes), ceux de tiers ou tout -autre événement indépendant de la volonté de Microsoft. - -D. RECOURS DANS LE CADRE DE LA VIOLATION DE GARANTIE. Nous nous engageons à -réparer ou à remplacer le logiciel gratuitement. Si nous ne pouvons pas le -réparer ni le remplacer, nous rembourserons le montant que vous avez payé pour -le logiciel figurant sur le reçu. Nous nous engageons à réparer ou à remplacer -les compléments, les mises à jour et le logiciel de remplacement gratuitement. -Si nous ne pouvons pas les réparer ni les remplacer, nous rembourserons le -montant que vous avez payé pour ces composants, le cas échéant. Vous devez -désinstaller le logiciel et le renvoyer à Microsoft avec une preuve d’achat pour -vous faire rembourser. Ces recours sont les seuls dont vous disposez dans le -cadre de la violation de garantie limitée. - -E. DROITS DES CONSOMMATEURS NON AFFECTÉS. Vous pouvez bénéficier de droits des -consommateurs supplémentaires dans le cadre du droit local, que ce contrat ne -peut modifier. - -F. PROCÉDURES RELATIVES AUX RÉCLAMATIONS DANS LE CADRE DE LA GARANTIE. Vous -devrez fournir une preuve d’achat pour obtenir de l’aide en matière de garantie. - -1. États-Unis et Canada. Pour obtenir de l’aide en matière de garantie ou des -informations sur la procédure à suivre pour vous faire rembourser un logiciel -acquis aux États-Unis et au Canada, mettez-vous en rapport avec Microsoft - • (800) MICROSOFT ; - • Microsoft Customer Service and Support, One Microsoft Way, Redmond, WA -98052-6399 ; ou - • en visitant www.microsoft.com/info/nareturns.htm. - -2. Europe, Moyen-Orient et Afrique. Si vous avez acquis le logiciel en Europe, -au Moyen-Orient ou en Afrique, Microsoft Ireland Operations Limited offre cette -garantie limitée. Pour faire une réclamation au titre de cette garantie, vous -devez vous mettre en rapport avec - • Microsoft Ireland Operations Limited, Customer Care Centre, Atrium Building -Block B, Carmanhall Road, Sandyford Industrial Estate, Dublin 18, Irlande ; ou - • votre filiale nationale de Microsoft (visitez le site -www.microsoft.com/worldwide). - -3. En dehors des États-Unis, du Canada, de l’Europe, du Moyen-Orient et de -l’Afrique. Si vous avez acquis le logiciel en dehors des États-Unis, du Canada, -de l’Europe, du Moyen-Orient et de l’Afrique, mettez-vous en rapport avec votre -filiale nationale de Microsoft (visitez le site www.microsoft.com/worldwide). - -G. AUCUNE AUTRE GARANTIE. La garantie limitée est la seule garantie directe de -Microsoft. Nous n’accordons aucune autre garantie ou condition expresse. Dans -toute la mesure permise par le droit local, les garanties implicites de qualité -marchande, d’adéquation à un usage particulier et d’absence de contrefaçon sont -exclues. Si le droit local vous accorde des garanties ou conditions implicites, -nonobstant la présente exclusion, les recours dont vous disposez sont ceux -présentés dans la clause de recours dans le cadre de la violation de garantie -ci-dessus, dans la limite autorisée par le droit local. - -H. LIMITATION DES DOMMAGES-INTÉRÊTS ET EXCLUSION DE RESPONSABILITÉ DANS LE CADRE -DE LA VIOLATION DE GARANTIE. La clause de limitation des dommages-intérêts et -exclusion de responsabilité ci-dessous s’applique aux violations de cette -garantie limitée. - -La présente garantie vous confère des droits légaux spécifiques et vous pouvez -également bénéficier d’autres droits qui varient d’un État à l’autre. Vous -pouvez également bénéficier d’autres droits qui varient d’un pays à l’autre. - -LIMITATION DES DOMMAGES-INTÉRÊTS ET EXCLUSION DE RESPONSABILITÉ POUR LES -DOMMAGES. Vous pouvez obtenir de Microsoft et de ses fournisseurs une -indemnisation en cas de dommages directs uniquement à hauteur du montant que -vous avez payé pour le logiciel. Vous ne pouvez prétendre à aucune indemnisation -pour les autres dommages, y compris les dommages spéciaux, indirects ou -accessoires et pertes de bénéfices. - -Cette limitation concerne - • toute affaire liée au logiciel, aux services ou au contenu (y compris le -code) figurant sur des sites Internet tiers ou dans des programmes tiers ; et - • les réclamations au titre de violation de contrat ou de garantie ou -condition, ou au titre de responsabilité stricte, de négligence ou d’une autre -faute dans la limite autorisée par la loi en vigueur. - -Elle s’applique également, même si - • la réparation, le remplacement ou le remboursement du logiciel ne compense -pas intégralement toute perte subie ; ou - • Microsoft connaissait l’éventualité d’un tel dommage. - -Certains États n’autorisent pas l’exclusion ou la limitation de responsabilité -pour les dommages indirects ou accessoires, de sorte que la limitation ou -l’exclusion ci-dessus peut ne pas vous être applicable. Elles peuvent également -ne pas vous être applicables, car votre pays n’autorise pas l’exclusion ou la -limitation de responsabilité pour les dommages indirects, accessoires ou de -quelque nature que ce soit. - -EFFET JURIDIQUE. Le présent contrat décrit certains droits juridiques. Vous -pourriez avoir d’autres droits prévus par les lois de votre État ou pays. Vous -pourriez également avoir des droits à l’égard de la partie de qui vous avez -acquis de logiciel. Le présent contrat ne modifie pas les droits que vous -confèrent les lois de votre État ou pays si celles ci ne le permettent pas. - -*************************************************************************** +You should have received a copy of the Common Public License along with this +library. diff --git a/source/l/jre/Welcome.html b/source/l/jre/Welcome.html index c55c68a6f..c4bdc518e 100644 --- a/source/l/jre/Welcome.html +++ b/source/l/jre/Welcome.html @@ -18,7 +18,7 @@ documentation for more information on using the Java Plug-in product. <p> See the <a href=http://java.sun.com/javase>Java Platform</a> web site for more information on the Java Platform. <hr> -<font size="-2">Copyright 2009 Sun Microsystems, Inc., 4150 Network Circle, Santa +<font size="-2">Copyright 2010 Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, California 95054, U.S.A.<BR> All rights reserved.</font> <p> diff --git a/source/l/jre/jre.SlackBuild b/source/l/jre/jre.SlackBuild index 260c6176a..70e775c67 100755 --- a/source/l/jre/jre.SlackBuild +++ b/source/l/jre/jre.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -23,8 +23,8 @@ # Note that the slack-desc file mentions the JRE version (edit when upgrading)! -VERSION=6u16 -DVER=1.6.0_16 +VERSION=6u20 +DVER=1.6.0_20 ARCH=x86_64 BUILD=${BUILD:-1} diff --git a/source/l/jre/slack-desc b/source/l/jre/slack-desc index 20df6be84..aa0151538 100644 --- a/source/l/jre/slack-desc +++ b/source/l/jre/slack-desc @@ -6,7 +6,7 @@ # leave one space after the ':'. |-----handy-ruler------------------------------------------------------| jre: Java(TM) 2 Platform Standard Edition Runtime Environment, -jre: Version 6.0 update 16. +jre: Version 6.0 update 20. jre: jre: The J2SE(TM) Runtime Environment (JRE) is intended for software jre: developers and vendors to redistribute with their applications. diff --git a/source/l/lcms/lcms.SlackBuild b/source/l/lcms/lcms.SlackBuild index 4510d2cf4..19efaa314 100755 --- a/source/l/lcms/lcms.SlackBuild +++ b/source/l/lcms/lcms.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,11 +21,21 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=1.18 -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} +VERSION=${VERSION:-$(echo lcms-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +NUMJOBS=${NUMJOBS:-" -j7 "} + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" @@ -35,6 +45,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -46,7 +59,7 @@ mkdir -p $TMP $PKG cd $TMP rm -rf lcms-$VERSION -tar xvf $CWD/lcms-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/lcms-$VERSION.tar.?z* || exit 1 cd lcms-$VERSION chown -R root:root . find . \ @@ -77,6 +90,14 @@ cp -a \ $PKG/usr/doc/lcms-$VERSION find $PKG/usr/doc/lcms-$VERSION -type f -exec chmod 644 {} \; +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/l/lesstif/lesstif.SlackBuild b/source/l/lesstif/lesstif.SlackBuild index cb169ad7f..70f888505 100755 --- a/source/l/lesstif/lesstif.SlackBuild +++ b/source/l/lesstif/lesstif.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2006-2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006-2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,9 +22,18 @@ PKGNAM=lesstif -VERSION=${VERSION:-0.95.0} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-5} +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi NUMJOBS=${NUMJOBS:-" -j7 "} @@ -43,11 +52,14 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi cd $TMP rm -rf ${PKGNAM}-${VERSION} -tar xvf $CWD/${PKGNAM}-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1 cd ${PKGNAM}-$VERSION || exit 1 if [ "$ARCH" = "x86_64" ]; then @@ -56,8 +68,6 @@ if [ "$ARCH" = "x86_64" ]; then zcat $CWD/lesstif.x86_64.patch.gz | patch -p1 --verbose || exit 1 fi -zcat $CWD/lesstif.gcc42.diff.gz | patch -p1 --verbose || exit 1 - # Check for NULL w in RenderTable.c to prevent possible crashes in # "experimental" code path: zcat $CWD/lesstif.rendertable.check.diff.gz | patch -p1 --verbose || exit 1 @@ -76,6 +86,7 @@ CFLAGS="$SLKCFLAGS" \ --prefix=/usr \ --libdir=/usr/lib${LIBDIRSUFFIX} \ --sysconfdir=/etc/X11 \ + --mandir=/usr/man \ --enable-shared \ --enable-static \ --enable-build-21 \ @@ -105,6 +116,15 @@ rmdir $PKG/usr/lib${LIBDIRSUFFIX}/LessTif mkdir $PKG/usr/doc mv doc $PKG/usr/doc/lesstif-${VERSION} ) + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + rmdir $PKG/usr/LessTif mkdir -p $PKG/etc/X11 mv $PKG/usr/lib${LIBDIRSUFFIX}/X11/app-defaults $PKG/etc/X11 diff --git a/source/l/lesstif/lesstif.gcc42.diff b/source/l/lesstif/lesstif.gcc42.diff deleted file mode 100644 index 5c3bf12ad..000000000 --- a/source/l/lesstif/lesstif.gcc42.diff +++ /dev/null @@ -1,23 +0,0 @@ ---- ./include/Motif-2.1/Xm/VendorSP.h.orig 2004-08-28 14:23:27.000000000 -0500 -+++ ./include/Motif-2.1/Xm/VendorSP.h 2009-03-16 15:29:38.000000000 -0500 -@@ -30,10 +30,6 @@ - #include <Xm/VendorS.h> - #include <X11/ShellP.h> - --#ifdef __cplusplus --extern "C" { --#endif -- - XMLIBEXPORT extern Cardinal _XmFilterResources(XtResource *resources, - Cardinal numResources, - WidgetClass filterClass, -@@ -57,9 +53,4 @@ - - XMLIBEXPORT extern VendorShellClassRec vendorShellClassRec; - -- --#ifdef __cplusplus --} --#endif -- - #endif /* _XM_VENDORSP_H */ diff --git a/source/l/libcap/libcap-2.16.tar.bz2.sign b/source/l/libaio/libaio-0.3.109.tar.sign index d4925d762..e9e6186e3 100644 --- a/source/l/libcap/libcap-2.16.tar.bz2.sign +++ b/source/l/libaio/libaio-0.3.109.tar.sign @@ -2,7 +2,7 @@ Version: GnuPG v1.4.9 (GNU/Linux) Comment: See http://www.kernel.org/signature.html for info -iD8DBQBJN4JLyGugalF9Dw4RAiqLAJ9L42xfkqkbmmTyQJulpL8VoRjurwCeJkLj -oLAyJMYhVE31Kumb66LU5c8= -=UTrX +iD8DBQBKz65OyGugalF9Dw4RAgZcAJwLPiBtx6k3XSh9KZf48MEjAssKYQCfZtuu +5+ttTF5tbBlF0vt9GZdLEiQ= +=IQ5R -----END PGP SIGNATURE----- diff --git a/source/l/libaio/libaio.SlackBuild b/source/l/libaio/libaio.SlackBuild index be3c1a1c3..4d6502013 100755 --- a/source/l/libaio/libaio.SlackBuild +++ b/source/l/libaio/libaio.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2006, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,11 +22,21 @@ PKGNAM=libaio -VERSION=${VERSION:-0.3.106} -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +NUMJOBS=${NUMJOBS:-" -j7 "} + if [ "$ARCH" = "x86_64" ]; then LIBDIRSUFFIX="64" else @@ -41,7 +51,7 @@ mkdir -p $TMP $PKG cd $TMP rm -rf ${PKGNAM}-${VERSION} -tar xvf $CWD/${PKGNAM}-$VERSION.tar.gz || exit 1 +tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1 cd ${PKGNAM}-$VERSION # Make sure ownerships and permissions are sane: @@ -95,9 +105,17 @@ fi # Add a documentation directory: mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION cp -a \ - COPYING ChangeLog INSTALL TODO \ + COPYING* INSTALL TODO README* \ $PKG/usr/doc/${PKGNAM}-$VERSION +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/l/libarchive/libarchive.SlackBuild b/source/l/libarchive/libarchive.SlackBuild index 976b3841d..2133e0739 100755 --- a/source/l/libarchive/libarchive.SlackBuild +++ b/source/l/libarchive/libarchive.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh # Copyright 2008 Heinz Wiesinger <hmwiesinger@gmx.at> -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -23,17 +23,25 @@ # Modified by Robby Workman <rworkman@slackware.com> - -PRGNAM=libarchive -VERSION=2.6.2 -ARCH=${ARCH:-x86_64} +PKGNAM=libarchive +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + NUMJOBS=${NUMJOBS:--j6} CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-$PRGNAM +PKG=$TMP/package-$PKGNAM if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -44,14 +52,17 @@ elif [ "$ARCH" = "i686" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG mkdir -p $TMP $PKG cd $TMP -rm -rf $PRGNAM-$VERSION -tar xvf $CWD/$PRGNAM-$VERSION.tar.bz2 || exit 1 -cd $PRGNAM-$VERSION || exit 1 +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1 +cd $PKGNAM-$VERSION || exit 1 chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -82,12 +93,12 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" \ for i in $( find . -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done ) -mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION -cp -a COPYING INSTALL NEWS README $PKG/usr/doc/$PRGNAM-$VERSION +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION +cp -a COPYING* INSTALL NEWS README* $PKG/usr/doc/$PKGNAM-$VERSION mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/l/libcap/libcap-2.19.tar.bz2.sign b/source/l/libcap/libcap-2.19.tar.bz2.sign new file mode 100644 index 000000000..23e2c3988 --- /dev/null +++ b/source/l/libcap/libcap-2.19.tar.bz2.sign @@ -0,0 +1,8 @@ +-----BEGIN PGP SIGNATURE----- +Version: GnuPG v1.4.9 (GNU/Linux) +Comment: See http://www.kernel.org/signature.html for info + +iD8DBQBLTn0myGugalF9Dw4RAkEcAJ9zpWMkph0bSL/WfNPHtIayydTUOQCeMoiN +DC9y+17zdyaaieDE7aH2rfs= +=YEBM +-----END PGP SIGNATURE----- diff --git a/source/l/libcap/libcap.SlackBuild b/source/l/libcap/libcap.SlackBuild index e7603570e..f77ad6e51 100755 --- a/source/l/libcap/libcap.SlackBuild +++ b/source/l/libcap/libcap.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -23,13 +23,22 @@ # Originally written by Menno Duursma -PRGNAM=libcap -VERSION=${VERSION:-2.16} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +PKGNAM=libcap +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | cut -d - -f 2 | rev | cut -f 3- -d . | rev)} +BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:-" -j7 "} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" @@ -49,14 +58,14 @@ fi CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-$PRGNAM +PKG=$TMP/package-$PKGNAM rm -rf $PKG mkdir -p $TMP $PKG cd $TMP -rm -rf $PRGNAM-$VERSION -tar xvf $CWD/$PRGNAM-$VERSION.tar.bz2 || exit 1 -cd $PRGNAM-$VERSION || exit 1 +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.bz2 || exit 1 +cd $PKGNAM-$VERSION || exit 1 zcat $CWD/libcap.capability.h.fix.broken.includes.diff.gz | patch -p1 || exit 1 @@ -72,11 +81,17 @@ sed -i.orig "s/^\(DEBUG =\).*/\1$SLKCFLAGS/" Make.Rules make DYNAMIC=yes $NUMJOBS || make DYNAMIC=yes || exit 1 make install FAKEROOT=$PKG man_prefix=/usr || exit 1 -chmod 755 $PKG/lib/libcap.so* +chmod 755 $PKG/lib${LIBDIRSUFFIX}/libcap.so* find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null +# Static libs are better placed under /usr: +if [ -r $PKG/lib${LIBDIRSUFFIX}/libcap.a ]; then + mkdir -p $PKG/usr/lib${LIBDIRSUFFIX} + mv $PKG/lib${LIBDIRSUFFIX}/libcap.a $PKG/usr/lib${LIBDIRSUFFIX} +fi + # Add included scripts ( cd contrib || exit 1 for file in pcaps4convenience pcaps4server pcaps4suid0 ; do @@ -93,11 +108,11 @@ rm -rf $PKG/usr/man/man2 for i in $(find . -type l) ; do ln -s $(readlink $i).gz $i.gz ; rm $i ; done ) -mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION cp -a \ CHANGELOG License README License pgp.keys.asc doc/capability.notes \ progs/quicktest.sh $CWD/capfaq-0.2.txt $CWD/README.SLACKWARE \ - $PKG/usr/doc/$PRGNAM-$VERSION + $PKG/usr/doc/$PKGNAM-$VERSION chown -R root:root $PKG/usr/doc find $PKG/usr/doc -type f -exec chmod 644 {} \; @@ -105,5 +120,5 @@ mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/l/libcdio/libcdio.SlackBuild b/source/l/libcdio/libcdio.SlackBuild index dc4f891b8..9379591fb 100755 --- a/source/l/libcdio/libcdio.SlackBuild +++ b/source/l/libcdio/libcdio.SlackBuild @@ -22,7 +22,7 @@ PKGNAM=libcdio -VERSION=${VERSION:-$(echo $(basename $(echo $PRGNAM-*.tar.bz2 | cut -f 2 -d -) .tar.bz2) | cut -f 2 -d -)} +VERSION=${VERSION:-$(echo $(basename $(echo $PKGNAM-*.tar.bz2 | cut -f 2 -d -) .tar.bz2) | cut -f 2 -d -)} ARCH=${ARCH:-x86_64} NUMJOBS=${NUMJOBS:-" -j7 "} BUILD=${BUILD:-2} diff --git a/source/l/libgtkhtml/libgtkhtml.SlackBuild b/source/l/libdiscid/libdiscid.SlackBuild index c22966fd3..f30ed7bf8 100755 --- a/source/l/libgtkhtml/libgtkhtml.SlackBuild +++ b/source/l/libdiscid/libdiscid.SlackBuild @@ -1,6 +1,7 @@ -#!/bin/sh +#!/bin/bash -# Copyright 2006, 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2010 Eric Hameleers, Eindhoven, NL +# Copyright 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,19 +22,26 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -PKGNAM=libgtkhtml -VERSION=${VERSION:-2.11.1} -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} -BUILD=${BUILD:-2} - +PKGNAM=libdiscid +VERSION=${VERSION:-0.2.2} +BUILD=${BUILD:-1} CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-${PKGNAM} +PKG=$TMP/package-$PKGNAM rm -rf $PKG mkdir -p $TMP $PKG +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" @@ -43,20 +51,23 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi cd $TMP rm -rf ${PKGNAM}-${VERSION} -tar xvf $CWD/${PKGNAM}-$VERSION.tar.bz2 || exit 1 -cd ${PKGNAM}-$VERSION +tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1 +cd ${PKGNAM}-$VERSION || exit 1 # Make sure ownerships and permissions are sane: chown -R root:root . find . \ - \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ - -exec chmod 755 {} \; -o \ - \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ - -exec chmod 644 {} \; + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; # Configure: CFLAGS="$SLKCFLAGS" \ @@ -64,12 +75,10 @@ CFLAGS="$SLKCFLAGS" \ --prefix=/usr \ --libdir=/usr/lib${LIBDIRSUFFIX} \ --sysconfdir=/etc \ - --localstatedir=/var/lib \ - --mandir=/usr/man \ --disable-static \ + --mandir=/usr/man \ --program-prefix= \ --program-suffix= \ - --disable-accessibility \ --build=$ARCH-slackware-linux # Build and install: @@ -77,8 +86,8 @@ make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG || exit 1 # Strip binaries: -find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ - | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null +find $PKG | xargs file | grep -e "executable" -e "shared object" \ + | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null # Compress and link manpages, if any: if [ -d $PKG/usr/man ]; then @@ -95,23 +104,15 @@ if [ -d $PKG/usr/man ]; then ) fi -# Compress info files, if any: -if [ -d $PKG/usr/info ]; then - ( cd $PKG/usr/info - rm -f dir - gzip -9 * - ) -fi - # Add a documentation directory: mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION cp -a \ - AUTHORS COPYING.LIB INSTALL NEWS README TODO docs/IDEAS \ + AUTHORS COPYING ChangeLog README \ $PKG/usr/doc/${PKGNAM}-$VERSION mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/l/libdiscid/slack-desc b/source/l/libdiscid/slack-desc new file mode 100644 index 000000000..d0455bdb5 --- /dev/null +++ b/source/l/libdiscid/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler------------------------------------------------------| +libdiscid: libdiscid (library to generate DiscIDs from audio CDs) +libdiscid: +libdiscid: libdiscid creates MusicBrainz DiscIDs from audio CDs. +libdiscid: It reads the table of contents (TOC) of a CD and generates +libdiscid: an identifier which can be used to lookup the CD at MusicBrainz. +libdiscid: Additionally, it provides a submission URL for adding the DiscID +libdiscid: to the database. +libdiscid: +libdiscid: +libdiscid: Home: http://musicbrainz.org/doc/libdiscid +libdiscid: diff --git a/source/l/libexif/libexif.SlackBuild b/source/l/libexif/libexif.SlackBuild index db9f6f4c6..3fce2befa 100755 --- a/source/l/libexif/libexif.SlackBuild +++ b/source/l/libexif/libexif.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,11 +21,21 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=0.6.16 -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} +VERSION=${VERSION:-$(echo libexif-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +NUMJOBS=${NUMJOBS:-" -j7 "} + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" @@ -35,6 +45,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -45,7 +58,7 @@ rm -rf $PKG mkdir -p $TMP $PKG cd $TMP rm -rf libexif-$VERSION -tar xvf $CWD/libexif-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/libexif-$VERSION.tar.?z* || exit 1 cd libexif-$VERSION zcat $CWD/libexif.pc.diff.gz | patch -p1 --verbose || exit 1 chown -R root:root . @@ -78,6 +91,14 @@ cp -a \ ABOUT-NLS AUTHORS COPYING NEWS README \ $PKG/usr/doc/libexif-$VERSION +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/l/libglade/libglade.SlackBuild b/source/l/libglade/libglade.SlackBuild index c9153b506..d8973a4e7 100755 --- a/source/l/libglade/libglade.SlackBuild +++ b/source/l/libglade/libglade.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,9 +21,18 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=${VERSION:-2.6.4} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +VERSION=${VERSION:-$(echo libglade-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-4} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi NUMJOBS=${NUMJOBS:-" -j7 "} @@ -40,12 +49,15 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG mkdir -p $TMP $PKG cd $TMP -tar xvf $CWD/libglade-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/libglade-$VERSION.tar.?z* || exit 1 cd libglade-$VERSION || exit 1 chown -R root:root . find . \ @@ -70,6 +82,10 @@ make install DESTDIR=$PKG # Hello! --enable-static=no seemed to mean something when ./configure ran... rm -f $PKG/usr/lib${LIBDIRSUFFIX}/libglade*.a +## [make that, we _wish_ these .la files _could_ go] +## These .la files can go. +#rm -f $PKG/usr/lib${LIBDIRSUFFIX}/libglade*.la + find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null @@ -81,6 +97,14 @@ cp -a \ ln -s /usr/share/gtk-doc/html/libglade html ) +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/l/libgphoto2/libgphoto2.SlackBuild b/source/l/libgphoto2/libgphoto2.SlackBuild index fec05df70..fb3efe162 100755 --- a/source/l/libgphoto2/libgphoto2.SlackBuild +++ b/source/l/libgphoto2/libgphoto2.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh # Copyright 2007-2008 Frank Caraballo <fecaraballo{at}gmail{dot}com> -# Copyright 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,11 +22,20 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -PRGNAM=libgphoto2 -VERSION=2.4.6 -ARCH=${ARCH:-x86_64} +PKGNAM=libgphoto2 +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + NUMJOBS=${NUMJOBS:-" -j7 "} if [ "$ARCH" = "i486" ]; then @@ -41,18 +50,21 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-$PRGNAM +PKG=$TMP/package-$PKGNAM rm -rf $PKG mkdir -p $TMP $PKG cd $TMP -rm -rf $PRGNAM-$VERSION -tar xvf $CWD/$PRGNAM-$VERSION.tar.?z* || exit 1 -cd $PRGNAM-$VERSION +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1 +cd $PKGNAM-$VERSION chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -67,8 +79,8 @@ CXXFLAGS="$SLKCFLAGS" \ --libdir=/usr/lib${LIBDIRSUFFIX} \ --disable-static \ --mandir=/usr/man \ - --docdir=/usr/doc/$PRGNAM-$VERSION \ - --with-doc-dir=/usr/doc/$PRGNAM-$VERSION \ + --docdir=/usr/doc/$PKGNAM-$VERSION \ + --with-doc-dir=/usr/doc/$PKGNAM-$VERSION \ --build=$ARCH-slackware-linux make $NUMJOBS || make || exit 1 @@ -94,7 +106,7 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ # Generate udev rules and hal device information files # First, we'll have to set (and export) some important variables LD_LIBRARY_PATH=$PKG/usr/lib${LIBDIRSUFFIX} -CAMLIBS=$PKG/usr/lib${LIBDIRSUFFIX}/$PRGNAM/$VERSION +CAMLIBS=$PKG/usr/lib${LIBDIRSUFFIX}/$PKGNAM/$VERSION LIBDIR=$PKG/usr/lib${LIBDIRSUFFIX} export LD_LIBRARY_PATH CAMLIBS LIBDIR # Generate udev rules @@ -115,30 +127,37 @@ unset LD_LIBRARY_PATH CAMLIBS LIBDIR # Unset these just in case for i in $(find . -type l) ; do ln -s $(readlink $i).gz $i.gz ; rm $i ; done ) -mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION cp -a \ AUTHORS COPYING* HACKING INSTALL MAINTAINERS \ NEWS README* TESTERS \ - $PKG/usr/doc/$PRGNAM-$VERSION -# The entire ChangeLog is excessive for most users: -cat $PKG/usr/doc/$PRGNAM-$VERSION/ChangeLog | head -n 1000 > $PKG/usr/doc/$PRGNAM-$VERSION/CL -mv $PKG/usr/doc/$PRGNAM-$VERSION/CL $PKG/usr/doc/$PRGNAM-$VERSION/ChangeLog + $PKG/usr/doc/$PKGNAM-$VERSION + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + # The apidocs are huge, and probably only of interest to developers who will # very likely use the source code as a reference: -rm -r $PKG/usr/doc/$PRGNAM-$VERSION/apidocs.html -cat << EOF > $PKG/usr/doc/$PRGNAM-$VERSION/apidocs.html/README +rm -r $PKG/usr/doc/$PKGNAM-$VERSION/apidocs.html +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION/apidocs.html +cat << EOF > $PKG/usr/doc/$PKGNAM-$VERSION/apidocs.html/README The complete API documentation may be found in the libgphoto2 source code archive. EOF # This library is not built, but it is useful for users to know why that is: -cp -a camlibs/jl2005a/README.jl2005a $PKG/usr/doc/$PRGNAM-$VERSION/camlibs -chmod 644 $PKG/usr/doc/$PRGNAM-$VERSION/camlibs/README.jl2005a -chown root:root $PKG/usr/doc/$PRGNAM-$VERSION/camlibs/README.jl2005a +cp -a camlibs/jl2005a/README.jl2005a $PKG/usr/doc/$PKGNAM-$VERSION/camlibs +chmod 644 $PKG/usr/doc/$PKGNAM-$VERSION/camlibs/README.jl2005a +chown root:root $PKG/usr/doc/$PKGNAM-$VERSION/camlibs/README.jl2005a mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/l/libgsf/libgsf.SlackBuild b/source/l/libgsf/libgsf.SlackBuild index 004a3b1fd..16d6a2dcc 100755 --- a/source/l/libgsf/libgsf.SlackBuild +++ b/source/l/libgsf/libgsf.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,16 +21,24 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=1.14.15 -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} +VERSION=${VERSION:-$(echo libgsf-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +NUMJOBS=${NUMJOBS:-" -j7 "} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-libgsf -rm -rf $PKG -mkdir -p $TMP $PKG if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -41,11 +49,16 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi +rm -rf $PKG +mkdir -p $TMP $PKG cd $TMP rm -rf libgsf-$VERSION -tar xvf $CWD/libgsf-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/libgsf-$VERSION.tar.?z* || exit 1 cd libgsf-$VERSION || exit 1 chown -R root:root . find . \ @@ -64,7 +77,6 @@ CFLAGS="$SLKCFLAGS" \ --mandir=/usr/man \ --disable-static \ --without-gnome-vfs \ - --without-gio \ --without-bonobo \ --build=$ARCH-slackware-linux @@ -93,6 +105,14 @@ cp -a \ AUTHORS BUGS COPYING* HACKING NEWS README TODO \ $PKG/usr/doc/libgsf-$VERSION +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/l/libiodbc/libiodbc.SlackBuild b/source/l/libiodbc/libiodbc.SlackBuild new file mode 100755 index 000000000..4ea1f6f54 --- /dev/null +++ b/source/l/libiodbc/libiodbc.SlackBuild @@ -0,0 +1,122 @@ +#!/bin/sh + +# Copyright 2009, 2010 Eric Hameleers, Eindhoven, NL +# Copyright 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA +# All rights reserved. + +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + +VERSION=3.52.7 +BUILD=${BUILD:-2} +NUMJOBS=${NUMJOBS:--j6} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-libiodbc + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "s390" ]; then + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + +rm -rf $PKG +mkdir -p $TMP $PKG +cd $TMP +rm -rf libiodbc-$VERSION +tar xvf $CWD/libiodbc-$VERSION.tar.?z* || exit 1 +cd libiodbc-$VERSION || exit 1 + +# Make sure ownerships and permissions are sane: +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +# Configure: +# We add '--disable-libodbc'. This way, a libodbc.so library does not get +# installed so that this package won't clash with an already present unixodbc. +CFLAGS="$SLKCFLAGS" \ +./configure \ + --prefix=/usr \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --sysconfdir=/etc \ + --mandir=/usr/man \ + --docdir=/usr/doc/libiodbc-$VERSION \ + --disable-static \ + --disable-libodbc \ + --program-prefix= \ + --program-suffix= \ + --build=$ARCH-slackware-linux + +# Build and install: +make $NUMJOBS || make || exit 1 +make install DESTDIR=$PKG || exit 1 + +# Strip binaries: +find $PKG | xargs file | grep -e "executable" -e "shared object" \ + | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + +# Compress and link manpages, if any: +if [ -d $PKG/usr/man ]; then + ( cd $PKG/usr/man + for manpagedir in $(find . -type d -name "man*") ; do + ( cd $manpagedir + for eachpage in $( find . -type l -maxdepth 1) ; do + ln -s $( readlink $eachpage ).gz $eachpage.gz + rm $eachpage + done + gzip -9 *.* + ) + done + ) +fi + +# Add a documentation directory: +mkdir -p $PKG/usr/doc/libiodbc-$VERSION +cp -a \ + AUTHORS COPYING* ChangeLog INSTALL README TODO \ + $PKG/usr/doc/libiodbc-$VERSION + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc + +cd $PKG +/sbin/makepkg -l y -c n $TMP/libiodbc-$VERSION-$ARCH-$BUILD.txz + diff --git a/source/l/libiodbc/slack-desc b/source/l/libiodbc/slack-desc new file mode 100644 index 000000000..6844c9274 --- /dev/null +++ b/source/l/libiodbc/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler-----------------------------------------------------| +libiodbc: libiodbc (Independent Open DataBase Connectivity) +libiodbc: +libiodbc: iODBC is the acronym for Independent Open DataBase Connectivity, +libiodbc: an Open Source platform independent implementation of both the ODBC +libiodbc: and X/Open specifications. It allows for developing solutions +libiodbc: that are language, platform and database independent. +libiodbc: +libiodbc: +libiodbc: +libiodbc: Homepage: http://iodbc.org/ +libiodbc: diff --git a/source/l/libjpeg/jpeg-6b.diff b/source/l/libjpeg/jpeg-6b.diff deleted file mode 100644 index 8ad8bb5db..000000000 --- a/source/l/libjpeg/jpeg-6b.diff +++ /dev/null @@ -1,59 +0,0 @@ ---- makefile.cfg.orig Sat Mar 21 13:08:57 1998 -+++ makefile.cfg Tue Oct 6 19:15:26 1998 -@@ -21,6 +21,8 @@ - - # The name of your C compiler: - CC= @CC@ -+SONAME=libjpeg.so.62 -+SHLIBNAME=libjpeg.so.62.0.0 - - # You may need to adjust these cc options: - CFLAGS= @CFLAGS@ @CPPFLAGS@ @INCLUDEFLAGS@ -@@ -125,6 +127,7 @@ - jdsample.$(O) jdcolor.$(O) jquant1.$(O) jquant2.$(O) jdmerge.$(O) - # These objectfiles are included in libjpeg.a - LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) -+SHLIBOBJECTS= $(LIBOBJECTS:%.o=%.so) - # object files for sample applications (excluding library files) - COBJECTS= cjpeg.$(O) rdppm.$(O) rdgif.$(O) rdtarga.$(O) rdrle.$(O) \ - rdbmp.$(O) rdswitch.$(O) cdjpeg.$(O) -@@ -133,7 +136,7 @@ - TROBJECTS= jpegtran.$(O) rdswitch.$(O) cdjpeg.$(O) transupp.$(O) - - --all: @A2K_DEPS@ libjpeg.$(A) cjpeg djpeg jpegtran rdjpgcom wrjpgcom -+all: @A2K_DEPS@ libjpeg.$(A) $(SHLIBNAME) cjpeg djpeg jpegtran rdjpgcom wrjpgcom - - # Special compilation rules to support ansi2knr and libtool. - .SUFFIXES: .lo .la -@@ -171,6 +174,11 @@ - $(LIBTOOL) --mode=link $(CC) -o libjpeg.la $(LIBOBJECTS) \ - -rpath $(libdir) -version-info $(JPEG_LIB_VERSION) - -+# shared library -+ -+$(SHLIBNAME): @A2K_DEPS@ $(SHLIBOBJECTS) -+ gcc -o $(SHLIBNAME) -Wl,-soname,$(SONAME) -shared $(SHLIBOBJECTS) -+ - # sample programs: - - cjpeg: $(COBJECTS) libjpeg.$(A) -@@ -214,7 +222,7 @@ - clean: - $(RM) *.o *.lo libjpeg.a libjpeg.la - $(RM) cjpeg djpeg jpegtran rdjpgcom wrjpgcom -- $(RM) ansi2knr core testout* config.log config.status -+ $(RM) ansi2knr core testout* config.log config.status $(SHLIBNAME) - $(RM) -r knr .libs _libs - - distclean: clean -@@ -289,6 +297,9 @@ - jidctfst.$(O): jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h - jidctint.$(O): jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h - jidctred.$(O): jidctred.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h -+ -+%.so : %.c -+ $(CC) -c -fPIC $(CFLAGS) $(CPPFLAGS) $< -o $@ - jquant1.$(O): jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h - jquant2.$(O): jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h - jutils.$(O): jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h diff --git a/source/l/libjpeg/libjpeg.SlackBuild b/source/l/libjpeg/libjpeg.SlackBuild index 5ec9f0164..9d43d22ea 100755 --- a/source/l/libjpeg/libjpeg.SlackBuild +++ b/source/l/libjpeg/libjpeg.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,9 +21,20 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=${VERSION:-6b} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-5} +VERSION=${VERSION:-v8a} +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +NUMJOBS=${NUMJOBS:-" -j7 "} CWD=$(pwd) TMP=${TMP:-/tmp} @@ -38,51 +49,58 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG mkdir -p $TMP $PKG -# Explode the package framework: -cd $PKG -explodepkg $CWD/_libjpeg.tar.gz -if [ "$ARCH" = "x86_64" ]; then - mv usr/lib usr/lib${LIBDIRSUFFIX} - sed -i -e "s#usr/lib#usr/lib${LIBDIRSUFFIX}#g" install/doinst.sh -fi - cd $TMP -rm -rf jpeg-6b -tar xzvf $CWD/jpegsrc.v6b.tar.gz -cd jpeg-6b +rm -rf jpeg-8 +tar xvf $CWD/jpegsrc.${VERSION}.tar.?z* || exit 1 +cd jpeg-$(echo $VERSION | cut -f 2 -d v) + chown -R root:root . -zcat $CWD/jpeg-6b.diff.gz | patch -p0 -E +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + export CFLAGS="$SLKCFLAGS" ./configure \ + --prefix=/usr \ + --mandir=/usr/man \ --libdir=/usr/lib${LIBDIRSUFFIX} -make -j3 || exit 1 -strip cjpeg djpeg rdjpgcom wrjpgcom jpegtran -cat cjpeg > $PKG/usr/bin/cjpeg -cat djpeg > $PKG/usr/bin/djpeg -cat jpegtran > $PKG/usr/bin/jpegtran -cat rdjpgcom > $PKG/usr/bin/rdjpgcom -cat wrjpgcom > $PKG/usr/bin/wrjpgcom -for page in cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 wrjpgcom.1 ; do - cat $page | gzip -9c > $PKG/usr/man/man1/$page.gz -done -strip --strip-unneeded libjpeg.so.62.0.0 -cat libjpeg.so.62.0.0 > $PKG/usr/lib${LIBDIRSUFFIX}/libjpeg.so.62.0.0 -cat libjpeg.a > $PKG/usr/lib${LIBDIRSUFFIX}/libjpeg.a -cp -a jconfig.h jpeglib.h jmorecfg.h jerror.h $PKG/usr/include -# KDE includes this complete header list, but the libjpeg source doesn't -# suggest it, and we trust them. :) -#for file in jchuff.h jdhuff.h jdct.h jerror.h jinclude.h jmemsys.h \ -# jmorecfg.h jpegint.h jpeglib.h jversion.h cdjpeg.h cderror.h jconfig.h ; do -# cp -a $file $PKG/usr/include -#done +make $NUMJOBS || make || exit 1 +make install DESTDIR=$PKG + +# Strip binaries: +( cd $PKG + find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null +) + +# Compress and link manpages, if any: +if [ -d $PKG/usr/man ]; then + ( cd $PKG/usr/man + for manpagedir in $(find . -type d -name "man*") ; do + ( cd $manpagedir + for eachpage in $( find . -type l -maxdepth 1) ; do + ln -s $( readlink $eachpage ).gz $eachpage.gz + rm $eachpage + done + gzip -9 *.? + ) + done + ) +fi + mkdir -p $PKG/usr/doc/libjpeg-$VERSION -cp -a README *.doc $PKG/usr/doc/libjpeg-$VERSION -chmod 644 $PKG/usr/doc/libjpeg-$VERSION/* +cp -a README $PKG/usr/doc/libjpeg-$VERSION + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/l/liblastfm/liblastfm.SlackBuild b/source/l/liblastfm/liblastfm.SlackBuild new file mode 100755 index 000000000..b5d1a401b --- /dev/null +++ b/source/l/liblastfm/liblastfm.SlackBuild @@ -0,0 +1,93 @@ +#!/bin/sh + +# Slackware build script for liblastfm + +# Copyright 2009 Vincent Batts +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +PRGNAM="liblastfm" +VERSION=0.3.0 +BUILD=${BUILD:-2} +NUMJOBS=${NUMJOBS:--j6} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-$PRGNAM + +if [ "$ARCH" = "x86_64" ]; then + LIBDIRSUFFIX="64" +else + LIBDIRSUFFIX="" +fi + +rm -rf $PKG +mkdir -p $TMP $PKG +cd $TMP +tar xvf $CWD/$PRGNAM-$VERSION.tar.bz2 || exit 1 +cd $PRGNAM-$VERSION || exit 1 +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +# Fix for Ruby 1.9.1: +sed -i "s/require 'ftools'//g" admin/* + +./configure \ + --prefix /usr \ + --release + +make $NUMJOBS || make || exit 1 +make install DESTDIR=$PKG || exit 1 + +# For 64-bit, make sure that the libraries are in the proper directory: +if [ "$LIBDIRSUFFIX" = "64" ]; then + mv $PKG/usr/lib $PKG/usr/lib64 +fi + +if [ -d $PKG/usr/man ]; then + gzip -9 $PKG/usr/man/man?/* +fi + +mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +cp -a \ + COPYING README \ + $PKG/usr/doc/$PRGNAM-$VERSION + +find $PKG | xargs file | grep -e "executable" -e "shared object" \ + | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc + +cd $PKG +/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz + diff --git a/source/l/liblastfm/slack-desc b/source/l/liblastfm/slack-desc new file mode 100644 index 000000000..a046a2a9f --- /dev/null +++ b/source/l/liblastfm/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler-----------------------------------------------------| +liblastfm: liblastfm (last fm library) +liblastfm: +liblastfm: The last.fm audio scrobbling service library. +liblastfm: +liblastfm: +liblastfm: +liblastfm: +liblastfm: +liblastfm: +liblastfm: +liblastfm: diff --git a/source/l/libmng/libmng.SlackBuild b/source/l/libmng/libmng.SlackBuild index 129c347c4..a40b0cf15 100755 --- a/source/l/libmng/libmng.SlackBuild +++ b/source/l/libmng/libmng.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2006, 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006, 2007, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,11 +22,18 @@ PKGNAM=libmng -VERSION=${VERSION:-1.0.10} -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} -BUILD=${BUILD:-1} - +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-2} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi CWD=$(pwd) TMP=${TMP:-/tmp} @@ -34,6 +41,8 @@ PKG=$TMP/package-${PKGNAM} rm -rf $PKG mkdir -p $TMP $PKG +NUMJOBS=${NUMJOBS:-" -j7 "} + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" @@ -43,11 +52,14 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi cd $TMP rm -rf ${PKGNAM}-${VERSION} -tar xvf $CWD/${PKGNAM}-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1 cd ${PKGNAM}-$VERSION # Make sure ownerships and permissions are sane: diff --git a/source/l/libmsn/libmsn.SlackBuild b/source/l/libmsn/libmsn.SlackBuild index 06b98185e..5de598ef2 100755 --- a/source/l/libmsn/libmsn.SlackBuild +++ b/source/l/libmsn/libmsn.SlackBuild @@ -2,7 +2,7 @@ # Slackware build script for libmsn -# Copyright 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # Redistribution and use of this script, with or without modification, is @@ -23,8 +23,7 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. PKGNAM=libmsn -VERSION=r96 -ARCH=${ARCH:-x86_64} +VERSION=4.1 BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:--j6} @@ -32,6 +31,16 @@ CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-$PKGNAM +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" @@ -41,6 +50,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG @@ -65,8 +77,8 @@ cd build -DCMAKE_INSTALL_PREFIX=/usr \ -DLIB_SUFFIX=${LIBDIRSUFFIX} \ .. - make $NUMJOBS || make || exit 1 - make install DESTDIR=$PKG || exit 1 + make $NUMJOBS || make || exit 1 + make install DESTDIR=$PKG || exit 1 cd .. find $PKG | xargs file | grep -e "executable" -e "shared object" \ diff --git a/source/l/libmsn/slack-desc b/source/l/libmsn/slack-desc index 0875c42ac..8fe1410c5 100644 --- a/source/l/libmsn/slack-desc +++ b/source/l/libmsn/slack-desc @@ -13,7 +13,7 @@ libmsn: connecting to Microsoft's MSN Messenger service. libmsn: libmsn: libmsn: -libmsn: Homepage: http://sourceforge.net/projects/libmsn/ libmsn: libmsn: +libmsn: Homepage: http://sourceforge.net/projects/libmsn/ libmsn: diff --git a/source/l/libmtp/libmtp.SlackBuild b/source/l/libmtp/libmtp.SlackBuild index 748682d55..c00fc5996 100755 --- a/source/l/libmtp/libmtp.SlackBuild +++ b/source/l/libmtp/libmtp.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2006, 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006, 2007, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,11 +22,20 @@ PKGNAM=libmtp -VERSION=${VERSION:-0.3.6} -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} -BUILD=${BUILD:-1} +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-2} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi +NUMJOBS=${NUMJOBS:-" -j7 "} CWD=$(pwd) TMP=${TMP:-/tmp} @@ -43,6 +52,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi cd $TMP @@ -80,6 +92,16 @@ sed -e 's/MODE="666"/GROUP="audio", MODE="0660"/' libmtp.rules \ mkdir -p $PKG/usr/share/hal/fdi/information/20thirdparty/ cat libmtp.fdi > $PKG/usr/share/hal/fdi/information/20thirdparty/10-libmtp.fdi +# Guess someone didn't have enough to drink: +( cd $PKG/usr/bin + rm -f mtp-sendtr mtp-sendfile mtp-newfolder mtp-getfile mtp-delfile + ln -s mtp-connect mtp-sendtr + ln -s mtp-connect mtp-sendfile + ln -s mtp-connect mtp-newfolder + ln -s mtp-connect mtp-getfile + ln -s mtp-connect mtp-delfile +) + # Strip binaries: find $PKG | xargs file | grep -e "executable" -e "shared object" \ | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null diff --git a/source/l/libmtp/slack-desc b/source/l/libmtp/slack-desc index 5bc514e20..7e4aba0e6 100644 --- a/source/l/libmtp/slack-desc +++ b/source/l/libmtp/slack-desc @@ -9,7 +9,7 @@ libmtp: libmtp (A library for MTP media devices) libmtp: libmtp: libmtp is a library that attempts to support Microsoft's Media -libmtp: Transfer Protocol (MTP). It was initially based the great libptp2 +libmtp: Transfer Protocol (MTP). It was initially based on the great libptp2 libmtp: library by Mariusz Woloszyn now maintained by Marcus Meissners, and libmtp: Hubert Figuere's libgphoto2 work based on libptp2 (or is libptp2 libmtp: based on libgphoto?). It is like a master DJ has remixed all of diff --git a/source/l/libnotify/libnotify.SlackBuild b/source/l/libnotify/libnotify.SlackBuild new file mode 100755 index 000000000..671a6d85b --- /dev/null +++ b/source/l/libnotify/libnotify.SlackBuild @@ -0,0 +1,92 @@ +#!/bin/sh +# +# Slackware build script for libnotify +# +# Copyright 2009 Erik W. Hanson, Minneapolis, MN, USA +# Copyright 2010 Patrick J. Volkerding, Sebeka, MN, USA +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +PRGNAM=libnotify +VERSION=0.4.5 +BUILD=${BUILD:-2} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-$PRGNAM +OUTPUT=${OUTPUT:-/tmp} + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "i686" ]; then + SLKCFLAGS="-O2 -march=i686 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + +set -eu + +rm -rf $PKG +mkdir -p $TMP $PKG $OUTPUT +cd $TMP +rm -rf $PRGNAM-$VERSION +tar xvf $CWD/$PRGNAM-$VERSION.tar.?z* +cd $PRGNAM-$VERSION +chown -R root:root . +chmod -R u+w,go+r-w,a-s . + +CFLAGS="$SLKCFLAGS" \ +./configure \ + --prefix=/usr \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --sysconfdir=/etc \ + --localstatedir=/var \ + --enable-static=no \ + --enable-shared=yes \ + --build=$ARCH-slackware-linux + +make +make install-strip DESTDIR=$PKG + +mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +cp -a AUTHORS ChangeLog COPYING README $PKG/usr/doc/$PRGNAM-$VERSION +( cd $PKG/usr/doc/$PRGNAM-$VERSION ; ln -s ../../share/gtk-doc/html/libnotify html ) +cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc + +cd $PKG +/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/l/libnotify/slack-desc b/source/l/libnotify/slack-desc new file mode 100644 index 000000000..4a46ad9a3 --- /dev/null +++ b/source/l/libnotify/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler--------------------------------------------------| +libnotify: libnotify (notification library) +libnotify: +libnotify: A general library for event notification +libnotify: +libnotify: Homepage: http://www.galago-project.org/news/index.php +libnotify: +libnotify: +libnotify: +libnotify: +libnotify: +libnotify: diff --git a/source/l/libogg/libogg.SlackBuild b/source/l/libogg/libogg.SlackBuild index b6fcc4283..01e7b4944 100755 --- a/source/l/libogg/libogg.SlackBuild +++ b/source/l/libogg/libogg.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,10 +21,20 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=1.1.3 -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-$(echo libogg-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + NUMJOBS=${NUMJOBS:-" -j7 "} -BUILD=${BUILD:-2} if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -35,6 +45,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -46,7 +59,7 @@ mkdir -p $TMP $PKG cd $TMP rm -rf libogg-$VERSION -tar xvf $CWD/libogg-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/libogg-$VERSION.tar.?z* || exit 1 cd libogg-$VERSION chown -R root:root . find . \ diff --git a/source/l/libpng/libpng.SlackBuild b/source/l/libpng/libpng.SlackBuild index adf477bb3..83083c0b0 100755 --- a/source/l/libpng/libpng.SlackBuild +++ b/source/l/libpng/libpng.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2005-2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2005-2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,10 +21,20 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=1.2.37 -ARCH=${ARCH:-x86_64} +VERSION_OLD=1.2.43 +VERSION_NEW=1.4.2 BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "$ARCH" = "x86_64" ]; then LIBDIRSUFFIX="64" else @@ -37,9 +47,11 @@ PKG=$TMP/package-libpng rm -rf $PKG mkdir -p $TMP $PKG/usr +build_source() { + cd $TMP rm -rf libpng-$VERSION -tar xjvf $CWD/libpng-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/libpng-$VERSION.tar.?z* || exit 1 cd libpng-$VERSION chown -R root:root . find . \ @@ -48,36 +60,44 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; -# Might as well link to -lz -lm, since the ./configure seems -# to be doing it that way now... finally. That'll prevent -# a couple of emails a week. :-) -zcat $CWD/libpng.libs.diff.gz | patch -p1 --verbose || exit 1 - -# Need this to substitute macros, but we'll keep using the -# pre-built Makefile for now anyway... +# Look like using ./configure is the only way that works now... ./configure --prefix=/usr \ - --libdir=/usr/lib${LIBDIRSUFFIX} + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --mandir=/usr/man -# Link the custom makefile: -ln -sf scripts/makefile.linux ./Makefile +make -j4 prefix=/usr LIBPATH=/usr/lib${LIBDIRSUFFIX} ZLIBLIB="-L/usr/lib${LIBDIRSUFFIX} -lm -lz" || exit 1 +make install prefix=/usr LIBPATH=/usr/lib${LIBDIRSUFFIX} ZLIBLIB="-L/usr/lib${LIBDIRSUFFIX} -lm -lz" DESTDIR=$PKG -make -j4 prefix=/usr LIBPATH=/usr/lib${LIBDIRSUFFIX} || exit 1 -make install prefix=/usr LIBPATH=/usr/lib${LIBDIRSUFFIX} DESTDIR=$PKG - -# This symlink is needed to keep old applications running: -# I guess the real lib used the major number 3, then 0 for -# a short while, and now .3 again. Hopefully it will stay -# this way as it was .3 in Slackware 10.2. One can hope. +# I'm ditching this to see if anyone cares. +# +## This symlink is needed to keep old applications running: +## I guess the real lib used the major number 3, then 0 for +## a short while, and now .3 again. Hopefully it will stay +## this way as it was .3 in Slackware 10.2. One can hope. +#( cd $PKG/usr/lib${LIBDIRSUFFIX} +# if [ ! -e libpng.so.0 -a -e libpng.so.3 ]; then +# ln -sf libpng.so.3 libpng.so.0 +# fi +#) + +# Well, glad I got rid of the above, but <someone> upstream still does not +# grok shared libraries on Linux it seems -- libpng-1.4.0 caused all the +# newly compiled binaries to want libpng.so.14, and now libpng-1.4.1 +# wants to change that to libpng14.so.14. Searching online finds that +# we are not the only ones with binaries that want libpng.so.14, so we +# are forced to provide a compatibility symlink again... :-/ +# +# We'll try to remove this in 5 to 10 years, just like before. ( cd $PKG/usr/lib${LIBDIRSUFFIX} - if [ ! -e libpng.so.0 -a -e libpng.so.3 ]; then - ln -sf libpng.so.3 libpng.so.0 + if [ ! -e libpng.so.14 -a -e libpng14.so.14 ]; then + ln -sf libpng14.so.14 libpng.so.14 fi ) find $PKG | xargs file | grep -e "executable" -e "shared object" \ | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -gzip -9 $PKG/usr/man/man?/* +gzip -9 --force $PKG/usr/man/man?/*.? mkdir -p $PKG/usr/doc/libpng-$VERSION cp -a \ @@ -85,6 +105,27 @@ cp -a \ libpng*.txt example.c \ $PKG/usr/doc/libpng-$VERSION +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/libpng-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + +} + +# Build the 1.2 version: +VERSION=$VERSION_OLD +build_source + +# Build the 1.4 version: +VERSION=$VERSION_NEW +build_source + +# Default the includes to version 1.4.x: +( cd $PKG/usr/include ; ln -sf libpng14 libpng ) + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/l/libpng/libpng.libs.diff b/source/l/libpng/libpng.libs.diff deleted file mode 100644 index 814365f6f..000000000 --- a/source/l/libpng/libpng.libs.diff +++ /dev/null @@ -1,18 +0,0 @@ -diff -ruN libpng-1.2.12/scripts/makefile.linux libpng-1.2.12-ldhack/scripts/makefile.linux
---- libpng-1.2.12/scripts/makefile.linux 2006-06-27 22:22:40.000000000 +0200
-+++ libpng-1.2.12-ldhack/scripts/makefile.linux 2006-08-25 14:27:08.000000000 +0200
-@@ -110,12 +110,12 @@
- $(LN_SF) $(LIBSOVER) $(LIBSOMAJ)
-
- $(LIBSOVER): $(OBJSDLL)
-- $(CC) -shared -Wl,-soname,$(LIBSOMAJ) -o $(LIBSOVER) $(OBJSDLL)
-+ $(CC) -shared -Wl,-soname,$(LIBSOMAJ) -o $(LIBSOVER) $(OBJSDLL) -lm -lz
-
- $(OLDSOVER): $(OBJSDLL)
- $(CC) -shared -Wl,-soname,$(OLDSOMAJ) \
- -o $(OLDSOVER) \
-- $(OBJSDLL)
-+ $(OBJSDLL) -lm -lz
-
- pngtest: pngtest.o $(LIBSO)
- $(CC) -o pngtest $(CFLAGS) pngtest.o $(LDFLAGS)
diff --git a/source/l/libraw1394/libraw1394-2.0.5.tar.sign b/source/l/libraw1394/libraw1394-2.0.5.tar.sign new file mode 100644 index 000000000..a0d52cf1d --- /dev/null +++ b/source/l/libraw1394/libraw1394-2.0.5.tar.sign @@ -0,0 +1,8 @@ +-----BEGIN PGP SIGNATURE----- +Version: GnuPG v1.4.9 (GNU/Linux) +Comment: See http://www.kernel.org/signature.html for info + +iD8DBQBLSEqvyGugalF9Dw4RAueNAJ9LX2wQyXxyDS0Jqet7Om5arr0+wwCeMJUV +7mZJlZrVGYg2b+bcycVTf2U= +=louL +-----END PGP SIGNATURE----- diff --git a/source/l/libraw1394/libraw1394.SlackBuild b/source/l/libraw1394/libraw1394.SlackBuild index 7b274c814..e7e3feb68 100755 --- a/source/l/libraw1394/libraw1394.SlackBuild +++ b/source/l/libraw1394/libraw1394.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh # Copyright 2007 Pierre Cazenave <pwcazenave@gmail.com> -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -23,20 +23,34 @@ # Modified by Robby Workman <rworkman at slackware.com> -VERSION=2.0.0 -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:--j7} +PKGNAM=libraw1394 +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +NUMJOBS=${NUMJOBS:--j7} + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" - elif [ "$ARCH" = "i686" ]; then +elif [ "$ARCH" = "i686" ]; then SLKCFLAGS="-O2 -march=i686 -mtune=i686" LIBDIRSUFFIX="" - elif [ "$ARCH" = "x86_64" ]; then +elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -47,7 +61,7 @@ mkdir -p $TMP $PKG cd $TMP rm -rf $TMP/libraw1394-$VERSION -tar xvf $CWD/libraw1394-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/libraw1394-$VERSION.tar.?z* || exit 1 cd libraw1394-$VERSION || exit 1 chown -R root:root . find . \ @@ -79,10 +93,18 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ mkdir -p $PKG/usr/doc/libraw1394-$VERSION cp -a \ - AUTHORS COPYING* INSTALL NEWS README \ + AUTHORS COPYING* INSTALL NEWS README* \ $PKG/usr/doc/libraw1394-$VERSION find $PKG/usr/doc/libraw1394-$VERSION -type f -exec chmod 644 {} \; +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/l/libraw1394/libraw1394.info b/source/l/libraw1394/libraw1394.info deleted file mode 100644 index c1657c5b3..000000000 --- a/source/l/libraw1394/libraw1394.info +++ /dev/null @@ -1,5 +0,0 @@ -PRGNAM=libraw1394 -VERSION=1.3.0 -HOMEPAGE=www.linux1394.org/ -DOWNLOAD=http://www.linux1394.org/dl/libraw1394-1.3.0.tar.gz -MD5SUM=c5d9ab62bd25dba96af010b3471e816a diff --git a/source/l/libraw1394/slack-desc b/source/l/libraw1394/slack-desc index 7e93533ff..d8f96d0b4 100644 --- a/source/l/libraw1394/slack-desc +++ b/source/l/libraw1394/slack-desc @@ -11,7 +11,7 @@ libraw1394: libraw1394: libraw1394 provides direct access to the IEEE 1394 bus through libraw1394: the Linux 1394 subsystem's raw1394 user space interface. libraw1394: -libraw1394: Homepage: http://www.linux1394.org/ +libraw1394: Homepage: http://www.kernel.org/pub/linux/libs/ieee1394/ libraw1394: libraw1394: libraw1394: diff --git a/source/l/librsvg/librsvg.SlackBuild b/source/l/librsvg/librsvg.SlackBuild index 556a54cf1..bd22ff821 100755 --- a/source/l/librsvg/librsvg.SlackBuild +++ b/source/l/librsvg/librsvg.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -23,9 +23,18 @@ # Slackware build script for librsvg -VERSION=2.26.0 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +VERSION=${VERSION:-$(echo librsvg-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-3} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi NUMJOBS=${NUMJOBS:-" -j7 "} @@ -38,6 +47,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -49,7 +61,7 @@ mkdir -p $TMP $PKG cd $TMP rm -rf librsvg-$VERSION -tar xvf $CWD/librsvg-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/librsvg-$VERSION.tar.?z* || exit 1 cd librsvg-$VERSION chown -R root:root . find . \ @@ -89,6 +101,14 @@ cp -a \ $PKG/usr/doc/librsvg-$VERSION ( cd $PKG/usr/doc/librsvg-$VERSION ; ln -s /usr/share/gtk-doc/html/rsvg html ) +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/l/libsamplerate/libsamplerate.SlackBuild b/source/l/libsamplerate/libsamplerate.SlackBuild new file mode 100755 index 000000000..cc4c5d504 --- /dev/null +++ b/source/l/libsamplerate/libsamplerate.SlackBuild @@ -0,0 +1,73 @@ +#!/bin/sh + +# Slackware build script for libsamplerate +# Written by paul wisehart paul@1ud2.com +# Modified by Robby Workman <rworkman@slackbuilds.org> + +PRGNAM=libsamplerate +VERSION=0.1.7 +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-$PRGNAM +OUTPUT=${OUTPUT:-/tmp} + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "i686" ]; then + SLKCFLAGS="-O2 -march=i686 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + +rm -rf $PKG +mkdir -p $TMP $PKG $OUTPUT +cd $TMP +rm -rf $PRGNAM-$VERSION +tar xvf $CWD/$PRGNAM-$VERSION.tar.?z* || exit 1 +cd $PRGNAM-$VERSION +chown -R root:root . +chmod -R u+w,go+r-w,a-s . + +CFLAGS="$SLKCFLAGS" \ +CXXFLAGS="$SLKCFLAGS" \ +./configure \ + --prefix=/usr \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --sysconfdir=/etc \ + --disable-static \ + --localstatedir=/var \ + --build=$ARCH-slackware-linux + +make -j4 || exit 1 +make install DESTDIR=$PKG || exit 1 + +find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ + | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true + +mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +cp -a COPYING README doc/* $PKG/usr/doc/$PRGNAM-$VERSION +cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc + +cd $PKG +/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/l/libsamplerate/slack-desc b/source/l/libsamplerate/slack-desc new file mode 100644 index 000000000..cf52161d9 --- /dev/null +++ b/source/l/libsamplerate/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler------------------------------------------------------| +libsamplerate: libsamplerate (a Sample Rate Converter for audio) +libsamplerate: +libsamplerate: Secret Rabbit Code (aka libsamplerate) is a Sample Rate Converter for +libsamplerate: audio. One example of where such a thing would be useful is +libsamplerate: converting audio from the CD sample rate of 44.1kHz to the 48kHz +libsamplerate: sample rate used by DAT players. SRC is capable of arbitrary and time +libsamplerate: varying conversions. SRC provides a small set of converters to allow +libsamplerate: quality to be traded off against computation cost. +libsamplerate: +libsamplerate: libsamplerate home: http://www.mega-nerd.com/SRC/ +libsamplerate: diff --git a/source/l/libspectre/libspectre.SlackBuild b/source/l/libspectre/libspectre.SlackBuild index e8dcdca93..5b6b06509 100755 --- a/source/l/libspectre/libspectre.SlackBuild +++ b/source/l/libspectre/libspectre.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,8 +22,7 @@ PRGNAM=libspectre -VERSION=0.2.2 -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-0.2.5} BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:--j6} @@ -31,6 +30,16 @@ CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-$PRGNAM +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" @@ -40,13 +49,16 @@ elif [ "$ARCH" = "i686" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG mkdir -p $TMP $PKG cd $TMP rm -rf $PRGNAM-$VERSION -tar xvf $CWD/$PRGNAM-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/$PRGNAM-$VERSION.tar.?z* || exit 1 cd $PRGNAM-$VERSION || exit 1 chown -R root:root . find . \ diff --git a/source/l/libtheora/libtheora.SlackBuild b/source/l/libtheora/libtheora.SlackBuild index b7e22b7ba..1f8a1abf5 100755 --- a/source/l/libtheora/libtheora.SlackBuild +++ b/source/l/libtheora/libtheora.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2006, 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006, 2007, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,11 +22,20 @@ PKGNAM=libtheora -VERSION=${VERSION:-1.0} -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +NUMJOBS=${NUMJOBS:-" -j7 "} CWD=$(pwd) TMP=${TMP:-/tmp} @@ -43,11 +52,14 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi cd $TMP rm -rf ${PKGNAM}-${VERSION} -tar xvf $CWD/${PKGNAM}-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1 cd ${PKGNAM}-$VERSION # Make sure ownerships and permissions are sane: diff --git a/source/l/libtiff/libtiff.SlackBuild b/source/l/libtiff/libtiff.SlackBuild index 9eb3e5a4e..d2e2556ee 100755 --- a/source/l/libtiff/libtiff.SlackBuild +++ b/source/l/libtiff/libtiff.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2005-2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2005-2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -20,9 +20,20 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=3.8.2 -ARCH=${ARCH:-x86_64} -BUILD=3 +VERSION=${VERSION:-$(echo tiff-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=1 + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +NUMJOBS=${NUMJOBS:-" -j7 "} if [ "$ARCH" = "i386" ]; then SLKCFLAGS="-O2 -march=i386 -mcpu=i686" @@ -36,6 +47,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -46,7 +60,7 @@ rm -rf $PKG mkdir -p $PKG cd $TMP rm -rf tiff-$VERSION -tar xjvf $CWD/tiff-$VERSION.tar.bz2 +tar xvf $CWD/tiff-$VERSION.tar.?z* || exit 1 cd tiff-$VERSION chown -R root:root . @@ -56,19 +70,18 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; -zcat $CWD/tiff-3.8.2.goo-sec.diff.gz | patch -p1 --verbose || exit 1 -zcat $CWD/tiff-3.8.2.tiffsplit.commandline.overflow.diff.gz | patch -p1 --verbose || exit 1 - CFLAGS="$SLKCFLAGS" \ ./configure \ --prefix=/usr \ --libdir=/usr/lib${LIBDIRSUFFIX} \ + --mandir=/usr/man \ --program-prefix="" \ --program-suffix="" \ - $ARCH-slackware-linux + --build=$ARCH-slackware-linux -make -j3 || exit 1 +make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG || exit 1 +( cd man ; make install-man DESTDIR=$PKG || exit 1 ) || exit 1 rm -r $PKG/usr/share ( cd $PKG find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null @@ -81,6 +94,14 @@ cp -a \ COPYRIGHT README RELEASE-DATE TODO VERSION \ $PKG/usr/doc/libtiff-$VERSION +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mv $PKG/usr/local/man $PKG/usr rmdir $PKG/usr/local diff --git a/source/l/libtiff/tiff-3.8.2.goo-sec.diff b/source/l/libtiff/tiff-3.8.2.goo-sec.diff deleted file mode 100644 index a5f9e6d5a..000000000 --- a/source/l/libtiff/tiff-3.8.2.goo-sec.diff +++ /dev/null @@ -1,661 +0,0 @@ ---- ./libtiff/tif_read.c.orig 2005-12-21 06:33:56.000000000 -0600 -+++ ./libtiff/tif_read.c 2006-08-17 22:02:40.000000000 -0500 -@@ -31,6 +31,8 @@ - #include "tiffiop.h" - #include <stdio.h> - -+#include <limits.h> -+ - int TIFFFillStrip(TIFF*, tstrip_t); - int TIFFFillTile(TIFF*, ttile_t); - static int TIFFStartStrip(TIFF*, tstrip_t); -@@ -272,7 +274,13 @@ - if ((tif->tif_flags & TIFF_MYBUFFER) && tif->tif_rawdata) - _TIFFfree(tif->tif_rawdata); - tif->tif_flags &= ~TIFF_MYBUFFER; -- if ( td->td_stripoffset[strip] + bytecount > tif->tif_size) { -+ /* -+ * This sanity check could potentially overflow, causing an OOB read. -+ * verify that offset + bytecount is > offset. -+ * -- taviso@google.com 14 Jun 2006 -+ */ -+ if ( td->td_stripoffset[strip] + bytecount > tif->tif_size || -+ bytecount > (UINT_MAX - td->td_stripoffset[strip])) { - /* - * This error message might seem strange, but it's - * what would happen if a read were done instead. -@@ -470,7 +478,13 @@ - if ((tif->tif_flags & TIFF_MYBUFFER) && tif->tif_rawdata) - _TIFFfree(tif->tif_rawdata); - tif->tif_flags &= ~TIFF_MYBUFFER; -- if ( td->td_stripoffset[tile] + bytecount > tif->tif_size) { -+ /* -+ * We must check this calculation doesnt overflow, potentially -+ * causing an OOB read. -+ * -- taviso@google.com 15 Jun 2006 -+ */ -+ if (td->td_stripoffset[tile] + bytecount > tif->tif_size || -+ bytecount > (UINT_MAX - td->td_stripoffset[tile])) { - tif->tif_curtile = NOTILE; - return (0); - } ---- ./libtiff/tif_next.c.orig 2005-12-21 06:33:56.000000000 -0600 -+++ ./libtiff/tif_next.c 2006-08-17 22:02:40.000000000 -0500 -@@ -105,11 +105,16 @@ - * as codes of the form <color><npixels> - * until we've filled the scanline. - */ -+ /* -+ * Ensure the run does not exceed the scanline -+ * bounds, potentially resulting in a security issue. -+ * -- taviso@google.com 14 Jun 2006. -+ */ - op = row; - for (;;) { - grey = (n>>6) & 0x3; - n &= 0x3f; -- while (n-- > 0) -+ while (n-- > 0 && npixels < imagewidth) - SETPIXEL(op, grey); - if (npixels >= (int) imagewidth) - break; ---- ./libtiff/tif_jpeg.c.orig 2006-03-21 10:42:50.000000000 -0600 -+++ ./libtiff/tif_jpeg.c 2006-08-17 22:02:40.000000000 -0500 -@@ -722,15 +722,31 @@ - segment_width = TIFFhowmany(segment_width, sp->h_sampling); - segment_height = TIFFhowmany(segment_height, sp->v_sampling); - } -- if (sp->cinfo.d.image_width != segment_width || -- sp->cinfo.d.image_height != segment_height) { -+ if (sp->cinfo.d.image_width < segment_width || -+ sp->cinfo.d.image_height < segment_height) { - TIFFWarningExt(tif->tif_clientdata, module, - "Improper JPEG strip/tile size, expected %dx%d, got %dx%d", - segment_width, - segment_height, - sp->cinfo.d.image_width, - sp->cinfo.d.image_height); -+ } -+ -+ if (sp->cinfo.d.image_width > segment_width || -+ sp->cinfo.d.image_height > segment_height) { -+ /* -+ * This case could be dangerous, if the strip or tile size has been -+ * reported as less than the amount of data jpeg will return, some -+ * potential security issues arise. Catch this case and error out. -+ * -- taviso@google.com 14 Jun 2006 -+ */ -+ TIFFErrorExt(tif->tif_clientdata, module, -+ "JPEG strip/tile size exceeds expected dimensions," -+ "expected %dx%d, got %dx%d", segment_width, segment_height, -+ sp->cinfo.d.image_width, sp->cinfo.d.image_height); -+ return (0); - } -+ - if (sp->cinfo.d.num_components != - (td->td_planarconfig == PLANARCONFIG_CONTIG ? - td->td_samplesperpixel : 1)) { -@@ -761,6 +777,22 @@ - sp->cinfo.d.comp_info[0].v_samp_factor, - sp->h_sampling, sp->v_sampling); - -+ /* -+ * There are potential security issues here for decoders that -+ * have already allocated buffers based on the expected sampling -+ * factors. Lets check the sampling factors dont exceed what -+ * we were expecting. -+ * -- taviso@google.com 14 June 2006 -+ */ -+ if (sp->cinfo.d.comp_info[0].h_samp_factor > sp->h_sampling || -+ sp->cinfo.d.comp_info[0].v_samp_factor > sp->v_sampling) { -+ TIFFErrorExt(tif->tif_clientdata, module, -+ "Cannot honour JPEG sampling factors that" -+ " exceed those specified."); -+ return (0); -+ } -+ -+ - /* - * XXX: Files written by the Intergraph software - * has different sampling factors stored in the -@@ -1521,15 +1553,18 @@ - { - JPEGState *sp = JState(tif); - -- assert(sp != 0); -+ /* assert(sp != 0); */ - - tif->tif_tagmethods.vgetfield = sp->vgetparent; - tif->tif_tagmethods.vsetfield = sp->vsetparent; - -- if( sp->cinfo_initialized ) -- TIFFjpeg_destroy(sp); /* release libjpeg resources */ -- if (sp->jpegtables) /* tag value */ -- _TIFFfree(sp->jpegtables); -+ if (sp != NULL) { -+ if( sp->cinfo_initialized ) -+ TIFFjpeg_destroy(sp); /* release libjpeg resources */ -+ if (sp->jpegtables) /* tag value */ -+ _TIFFfree(sp->jpegtables); -+ } -+ - _TIFFfree(tif->tif_data); /* release local state */ - tif->tif_data = NULL; - -@@ -1541,6 +1576,7 @@ - { - JPEGState* sp = JState(tif); - TIFFDirectory* td = &tif->tif_dir; -+ const TIFFFieldInfo* fip; - uint32 v32; - - assert(sp != NULL); -@@ -1606,7 +1642,13 @@ - default: - return (*sp->vsetparent)(tif, tag, ap); - } -- TIFFSetFieldBit(tif, _TIFFFieldWithTag(tif, tag)->field_bit); -+ -+ if ((fip = _TIFFFieldWithTag(tif, tag))) { -+ TIFFSetFieldBit(tif, fip->field_bit); -+ } else { -+ return (0); -+ } -+ - tif->tif_flags |= TIFF_DIRTYDIRECT; - return (1); - } -@@ -1726,7 +1768,11 @@ - { - JPEGState* sp = JState(tif); - -- assert(sp != NULL); -+ /* assert(sp != NULL); */ -+ if (sp == NULL) { -+ TIFFWarningExt(tif->tif_clientdata, "JPEGPrintDir", "Unknown JPEGState"); -+ return; -+ } - - (void) flags; - if (TIFFFieldSet(tif,FIELD_JPEGTABLES)) ---- ./libtiff/tif_dir.c.orig 2006-03-21 10:42:50.000000000 -0600 -+++ ./libtiff/tif_dir.c 2006-08-17 22:02:40.000000000 -0500 -@@ -122,6 +122,7 @@ - { - static const char module[] = "_TIFFVSetField"; - -+ const TIFFFieldInfo* fip = _TIFFFindFieldInfo(tif, tag, TIFF_ANY); - TIFFDirectory* td = &tif->tif_dir; - int status = 1; - uint32 v32, i, v; -@@ -195,10 +196,12 @@ - break; - case TIFFTAG_ORIENTATION: - v = va_arg(ap, uint32); -+ const TIFFFieldInfo* fip; - if (v < ORIENTATION_TOPLEFT || ORIENTATION_LEFTBOT < v) { -+ fip = _TIFFFieldWithTag(tif, tag); - TIFFWarningExt(tif->tif_clientdata, tif->tif_name, - "Bad value %lu for \"%s\" tag ignored", -- v, _TIFFFieldWithTag(tif, tag)->field_name); -+ v, fip ? fip->field_name : "Unknown"); - } else - td->td_orientation = (uint16) v; - break; -@@ -387,11 +390,15 @@ - * happens, for example, when tiffcp is used to convert between - * compression schemes and codec-specific tags are blindly copied. - */ -+ /* -+ * better not dereference fip if it is NULL. -+ * -- taviso@google.com 15 Jun 2006 -+ */ - if(fip == NULL || fip->field_bit != FIELD_CUSTOM) { - TIFFErrorExt(tif->tif_clientdata, module, - "%s: Invalid %stag \"%s\" (not supported by codec)", - tif->tif_name, isPseudoTag(tag) ? "pseudo-" : "", -- _TIFFFieldWithTag(tif, tag)->field_name); -+ fip ? fip->field_name : "Unknown"); - status = 0; - break; - } -@@ -468,7 +475,7 @@ - if (fip->field_type == TIFF_ASCII) - _TIFFsetString((char **)&tv->value, va_arg(ap, char *)); - else { -- tv->value = _TIFFmalloc(tv_size * tv->count); -+ tv->value = _TIFFCheckMalloc(tif, tv_size, tv->count, "Tag Value"); - if (!tv->value) { - status = 0; - goto end; -@@ -563,7 +570,7 @@ - } - } - if (status) { -- TIFFSetFieldBit(tif, _TIFFFieldWithTag(tif, tag)->field_bit); -+ TIFFSetFieldBit(tif, fip->field_bit); - tif->tif_flags |= TIFF_DIRTYDIRECT; - } - -@@ -572,12 +579,12 @@ - return (status); - badvalue: - TIFFErrorExt(tif->tif_clientdata, module, "%s: Bad value %d for \"%s\"", -- tif->tif_name, v, _TIFFFieldWithTag(tif, tag)->field_name); -+ tif->tif_name, v, fip ? fip->field_name : "Unknown"); - va_end(ap); - return (0); - badvalue32: - TIFFErrorExt(tif->tif_clientdata, module, "%s: Bad value %ld for \"%s\"", -- tif->tif_name, v32, _TIFFFieldWithTag(tif, tag)->field_name); -+ tif->tif_name, v32, fip ? fip->field_name : "Unknown"); - va_end(ap); - return (0); - } -@@ -813,12 +820,16 @@ - * If the client tries to get a tag that is not valid - * for the image's codec then we'll arrive here. - */ -+ /* -+ * dont dereference fip if it's NULL. -+ * -- taviso@google.com 15 Jun 2006 -+ */ - if( fip == NULL || fip->field_bit != FIELD_CUSTOM ) - { - TIFFErrorExt(tif->tif_clientdata, "_TIFFVGetField", - "%s: Invalid %stag \"%s\" (not supported by codec)", - tif->tif_name, isPseudoTag(tag) ? "pseudo-" : "", -- _TIFFFieldWithTag(tif, tag)->field_name); -+ fip ? fip->field_name : "Unknown"); - ret_val = 0; - break; - } ---- ./libtiff/tif_pixarlog.c.orig 2006-03-21 10:42:50.000000000 -0600 -+++ ./libtiff/tif_pixarlog.c 2006-08-17 22:02:40.000000000 -0500 -@@ -768,7 +768,19 @@ - if (tif->tif_flags & TIFF_SWAB) - TIFFSwabArrayOfShort(up, nsamples); - -- for (i = 0; i < nsamples; i += llen, up += llen) { -+ /* -+ * if llen is not an exact multiple of nsamples, the decode operation -+ * may overflow the output buffer, so truncate it enough to prevent that -+ * but still salvage as much data as possible. -+ * -- taviso@google.com 14th June 2006 -+ */ -+ if (nsamples % llen) -+ TIFFWarningExt(tif->tif_clientdata, module, -+ "%s: stride %lu is not a multiple of sample count, " -+ "%lu, data truncated.", tif->tif_name, llen, nsamples); -+ -+ -+ for (i = 0; i < nsamples - (nsamples % llen); i += llen, up += llen) { - switch (sp->user_datafmt) { - case PIXARLOGDATAFMT_FLOAT: - horizontalAccumulateF(up, llen, sp->stride, ---- ./libtiff/tif_dirread.c.orig 2006-03-21 10:42:50.000000000 -0600 -+++ ./libtiff/tif_dirread.c 2006-08-17 22:02:40.000000000 -0500 -@@ -29,6 +29,9 @@ - * - * Directory Read Support Routines. - */ -+ -+#include <limits.h> -+ - #include "tiffiop.h" - - #define IGNORE 0 /* tag placeholder used below */ -@@ -81,6 +84,7 @@ - uint16 dircount; - toff_t nextdiroff; - int diroutoforderwarning = 0; -+ int compressionknown = 0; - toff_t* new_dirlist; - - tif->tif_diroff = tif->tif_nextdiroff; -@@ -147,13 +151,20 @@ - } else { - toff_t off = tif->tif_diroff; - -- if (off + sizeof (uint16) > tif->tif_size) { -- TIFFErrorExt(tif->tif_clientdata, module, -- "%s: Can not read TIFF directory count", -- tif->tif_name); -- return (0); -+ /* -+ * Check for integer overflow when validating the dir_off, otherwise -+ * a very high offset may cause an OOB read and crash the client. -+ * -- taviso@google.com, 14 Jun 2006. -+ */ -+ if (off + sizeof (uint16) > tif->tif_size || -+ off > (UINT_MAX - sizeof(uint16))) { -+ TIFFErrorExt(tif->tif_clientdata, module, -+ "%s: Can not read TIFF directory count", -+ tif->tif_name); -+ return (0); - } else -- _TIFFmemcpy(&dircount, tif->tif_base + off, sizeof (uint16)); -+ _TIFFmemcpy(&dircount, tif->tif_base + off, -+ sizeof (uint16)); - off += sizeof (uint16); - if (tif->tif_flags & TIFF_SWAB) - TIFFSwabShort(&dircount); -@@ -254,6 +265,7 @@ - while (fix < tif->tif_nfields && - tif->tif_fieldinfo[fix]->field_tag < dp->tdir_tag) - fix++; -+ - if (fix >= tif->tif_nfields || - tif->tif_fieldinfo[fix]->field_tag != dp->tdir_tag) { - -@@ -264,17 +276,23 @@ - dp->tdir_tag, - dp->tdir_tag, - dp->tdir_type); -- -- TIFFMergeFieldInfo(tif, -- _TIFFCreateAnonFieldInfo(tif, -- dp->tdir_tag, -- (TIFFDataType) dp->tdir_type), -- 1 ); -+ /* -+ * creating anonymous fields prior to knowing the compression -+ * algorithm (ie, when the field info has been merged) could cause -+ * crashes with pathological directories. -+ * -- taviso@google.com 15 Jun 2006 -+ */ -+ if (compressionknown) -+ TIFFMergeFieldInfo(tif, _TIFFCreateAnonFieldInfo(tif, dp->tdir_tag, -+ (TIFFDataType) dp->tdir_type), 1 ); -+ else goto ignore; -+ - fix = 0; - while (fix < tif->tif_nfields && - tif->tif_fieldinfo[fix]->field_tag < dp->tdir_tag) - fix++; - } -+ - /* - * Null out old tags that we ignore. - */ -@@ -326,6 +344,7 @@ - dp->tdir_type, dp->tdir_offset); - if (!TIFFSetField(tif, dp->tdir_tag, (uint16)v)) - goto bad; -+ else compressionknown++; - break; - /* XXX: workaround for broken TIFFs */ - } else if (dp->tdir_type == TIFF_LONG) { -@@ -540,6 +559,7 @@ - * Attempt to deal with a missing StripByteCounts tag. - */ - if (!TIFFFieldSet(tif, FIELD_STRIPBYTECOUNTS)) { -+ const TIFFFieldInfo* fip = _TIFFFieldWithTag(tif, TIFFTAG_STRIPBYTECOUNTS); - /* - * Some manufacturers violate the spec by not giving - * the size of the strips. In this case, assume there -@@ -556,7 +576,7 @@ - "%s: TIFF directory is missing required " - "\"%s\" field, calculating from imagelength", - tif->tif_name, -- _TIFFFieldWithTag(tif,TIFFTAG_STRIPBYTECOUNTS)->field_name); -+ fip ? fip->field_name : "Unknown"); - if (EstimateStripByteCounts(tif, dir, dircount) < 0) - goto bad; - /* -@@ -580,6 +600,7 @@ - } else if (td->td_nstrips == 1 - && td->td_stripoffset[0] != 0 - && BYTECOUNTLOOKSBAD) { -+ const TIFFFieldInfo* fip = _TIFFFieldWithTag(tif, TIFFTAG_STRIPBYTECOUNTS); - /* - * XXX: Plexus (and others) sometimes give a value of zero for - * a tag when they don't know what the correct value is! Try -@@ -589,13 +610,14 @@ - TIFFWarningExt(tif->tif_clientdata, module, - "%s: Bogus \"%s\" field, ignoring and calculating from imagelength", - tif->tif_name, -- _TIFFFieldWithTag(tif,TIFFTAG_STRIPBYTECOUNTS)->field_name); -+ fip ? fip->field_name : "Unknown"); - if(EstimateStripByteCounts(tif, dir, dircount) < 0) - goto bad; - } else if (td->td_planarconfig == PLANARCONFIG_CONTIG - && td->td_nstrips > 2 - && td->td_compression == COMPRESSION_NONE - && td->td_stripbytecount[0] != td->td_stripbytecount[1]) { -+ const TIFFFieldInfo* fip = _TIFFFieldWithTag(tif, TIFFTAG_STRIPBYTECOUNTS); - /* - * XXX: Some vendors fill StripByteCount array with absolutely - * wrong values (it can be equal to StripOffset array, for -@@ -604,7 +626,7 @@ - TIFFWarningExt(tif->tif_clientdata, module, - "%s: Wrong \"%s\" field, ignoring and calculating from imagelength", - tif->tif_name, -- _TIFFFieldWithTag(tif,TIFFTAG_STRIPBYTECOUNTS)->field_name); -+ fip ? fip->field_name : "Unknown"); - if (EstimateStripByteCounts(tif, dir, dircount) < 0) - goto bad; - } -@@ -870,7 +892,13 @@ - - register TIFFDirEntry *dp; - register TIFFDirectory *td = &tif->tif_dir; -- uint16 i; -+ -+ /* i is used to iterate over td->td_nstrips, so must be -+ * at least the same width. -+ * -- taviso@google.com 15 Jun 2006 -+ */ -+ -+ uint32 i; - - if (td->td_stripbytecount) - _TIFFfree(td->td_stripbytecount); -@@ -947,16 +975,18 @@ - static int - CheckDirCount(TIFF* tif, TIFFDirEntry* dir, uint32 count) - { -+ const TIFFFieldInfo* fip = _TIFFFieldWithTag(tif, dir->tdir_tag); -+ - if (count > dir->tdir_count) { - TIFFWarningExt(tif->tif_clientdata, tif->tif_name, - "incorrect count for field \"%s\" (%lu, expecting %lu); tag ignored", -- _TIFFFieldWithTag(tif, dir->tdir_tag)->field_name, -+ fip ? fip->field_name : "Unknown", - dir->tdir_count, count); - return (0); - } else if (count < dir->tdir_count) { - TIFFWarningExt(tif->tif_clientdata, tif->tif_name, - "incorrect count for field \"%s\" (%lu, expecting %lu); tag trimmed", -- _TIFFFieldWithTag(tif, dir->tdir_tag)->field_name, -+ fip ? fip->field_name : "Unknown", - dir->tdir_count, count); - return (1); - } -@@ -970,6 +1000,7 @@ - TIFFFetchData(TIFF* tif, TIFFDirEntry* dir, char* cp) - { - int w = TIFFDataWidth((TIFFDataType) dir->tdir_type); -+ const TIFFFieldInfo* fip = _TIFFFieldWithTag(tif, dir->tdir_tag); - tsize_t cc = dir->tdir_count * w; - - /* Check for overflow. */ -@@ -1013,7 +1044,7 @@ - bad: - TIFFErrorExt(tif->tif_clientdata, tif->tif_name, - "Error fetching data for field \"%s\"", -- _TIFFFieldWithTag(tif, dir->tdir_tag)->field_name); -+ fip ? fip->field_name : "Unknown"); - return (tsize_t) 0; - } - -@@ -1039,10 +1070,12 @@ - static int - cvtRational(TIFF* tif, TIFFDirEntry* dir, uint32 num, uint32 denom, float* rv) - { -+ const TIFFFieldInfo* fip; - if (denom == 0) { -+ fip = _TIFFFieldWithTag(tif, dir->tdir_tag); - TIFFErrorExt(tif->tif_clientdata, tif->tif_name, - "%s: Rational with zero denominator (num = %lu)", -- _TIFFFieldWithTag(tif, dir->tdir_tag)->field_name, num); -+ fip ? fip->field_name : "Unknown", num); - return (0); - } else { - if (dir->tdir_type == TIFF_RATIONAL) -@@ -1159,6 +1192,20 @@ - static int - TIFFFetchShortPair(TIFF* tif, TIFFDirEntry* dir) - { -+ /* -+ * Prevent overflowing the v stack arrays below by performing a sanity -+ * check on tdir_count, this should never be greater than two. -+ * -- taviso@google.com 14 Jun 2006. -+ */ -+ if (dir->tdir_count > 2) { -+ const TIFFFieldInfo* fip = _TIFFFieldWithTag(tif, dir->tdir_tag); -+ TIFFWarningExt(tif->tif_clientdata, tif->tif_name, -+ "unexpected count for field \"%s\", %lu, expected 2; ignored.", -+ fip ? fip->field_name : "Unknown", -+ dir->tdir_count); -+ return 0; -+ } -+ - switch (dir->tdir_type) { - case TIFF_BYTE: - case TIFF_SBYTE: -@@ -1329,14 +1376,15 @@ - case TIFF_DOUBLE: - return (TIFFFetchDoubleArray(tif, dir, (double*) v)); - default: -+ { const TIFFFieldInfo* fip = _TIFFFieldWithTag(tif, dir->tdir_tag); - /* TIFF_NOTYPE */ - /* TIFF_ASCII */ - /* TIFF_UNDEFINED */ - TIFFErrorExt(tif->tif_clientdata, tif->tif_name, - "cannot read TIFF_ANY type %d for field \"%s\"", - dir->tdir_type, -- _TIFFFieldWithTag(tif, dir->tdir_tag)->field_name); -- return (0); -+ fip ? fip->field_name : "Unknown"); -+ return (0); } - } - return (1); - } -@@ -1351,6 +1399,9 @@ - int ok = 0; - const TIFFFieldInfo* fip = _TIFFFieldWithTag(tif, dp->tdir_tag); - -+ if (fip == NULL) { -+ return (0); -+ } - if (dp->tdir_count > 1) { /* array of values */ - char* cp = NULL; - -@@ -1493,6 +1544,7 @@ - TIFFFetchPerSampleShorts(TIFF* tif, TIFFDirEntry* dir, uint16* pl) - { - uint16 samples = tif->tif_dir.td_samplesperpixel; -+ const TIFFFieldInfo* fip; - int status = 0; - - if (CheckDirCount(tif, dir, (uint32) samples)) { -@@ -1510,9 +1562,10 @@ - - for (i = 1; i < check_count; i++) - if (v[i] != v[0]) { -+ fip = _TIFFFieldWithTag(tif, dir->tdir_tag); - TIFFErrorExt(tif->tif_clientdata, tif->tif_name, - "Cannot handle different per-sample values for field \"%s\"", -- _TIFFFieldWithTag(tif, dir->tdir_tag)->field_name); -+ fip ? fip->field_name : "Unknown"); - goto bad; - } - *pl = v[0]; -@@ -1534,6 +1587,7 @@ - TIFFFetchPerSampleLongs(TIFF* tif, TIFFDirEntry* dir, uint32* pl) - { - uint16 samples = tif->tif_dir.td_samplesperpixel; -+ const TIFFFieldInfo* fip; - int status = 0; - - if (CheckDirCount(tif, dir, (uint32) samples)) { -@@ -1551,9 +1605,10 @@ - check_count = samples; - for (i = 1; i < check_count; i++) - if (v[i] != v[0]) { -+ fip = _TIFFFieldWithTag(tif, dir->tdir_tag); - TIFFErrorExt(tif->tif_clientdata, tif->tif_name, - "Cannot handle different per-sample values for field \"%s\"", -- _TIFFFieldWithTag(tif, dir->tdir_tag)->field_name); -+ fip ? fip->field_name : "Unknown"); - goto bad; - } - *pl = v[0]; -@@ -1574,6 +1629,7 @@ - TIFFFetchPerSampleAnys(TIFF* tif, TIFFDirEntry* dir, double* pl) - { - uint16 samples = tif->tif_dir.td_samplesperpixel; -+ const TIFFFieldInfo* fip; - int status = 0; - - if (CheckDirCount(tif, dir, (uint32) samples)) { -@@ -1591,9 +1647,10 @@ - - for (i = 1; i < check_count; i++) - if (v[i] != v[0]) { -+ fip = _TIFFFieldWithTag(tif, dir->tdir_tag); - TIFFErrorExt(tif->tif_clientdata, tif->tif_name, - "Cannot handle different per-sample values for field \"%s\"", -- _TIFFFieldWithTag(tif, dir->tdir_tag)->field_name); -+ fip ? fip->field_name : "Unknown"); - goto bad; - } - *pl = v[0]; ---- ./libtiff/tif_dirinfo.c.orig 2006-02-07 07:51:03.000000000 -0600 -+++ ./libtiff/tif_dirinfo.c 2006-08-17 22:02:40.000000000 -0500 -@@ -775,7 +775,8 @@ - TIFFErrorExt(tif->tif_clientdata, "TIFFFieldWithTag", - "Internal error, unknown tag 0x%x", - (unsigned int) tag); -- assert(fip != NULL); -+ /* assert(fip != NULL); */ -+ - /*NOTREACHED*/ - } - return (fip); -@@ -789,7 +790,8 @@ - if (!fip) { - TIFFErrorExt(tif->tif_clientdata, "TIFFFieldWithName", - "Internal error, unknown tag %s", field_name); -- assert(fip != NULL); -+ /* assert(fip != NULL); */ -+ - /*NOTREACHED*/ - } - return (fip); ---- ./libtiff/tif_fax3.c.orig 2006-03-21 10:42:50.000000000 -0600 -+++ ./libtiff/tif_fax3.c 2006-08-17 22:02:40.000000000 -0500 -@@ -1136,6 +1136,7 @@ - Fax3VSetField(TIFF* tif, ttag_t tag, va_list ap) - { - Fax3BaseState* sp = Fax3State(tif); -+ const TIFFFieldInfo* fip; - - assert(sp != 0); - assert(sp->vsetparent != 0); -@@ -1181,7 +1182,13 @@ - default: - return (*sp->vsetparent)(tif, tag, ap); - } -- TIFFSetFieldBit(tif, _TIFFFieldWithTag(tif, tag)->field_bit); -+ -+ if ((fip = _TIFFFieldWithTag(tif, tag))) { -+ TIFFSetFieldBit(tif, fip->field_bit); -+ } else { -+ return (0); -+ } -+ - tif->tif_flags |= TIFF_DIRTYDIRECT; - return (1); - } diff --git a/source/l/libtiff/tiff-3.8.2.tiffsplit.commandline.overflow.diff b/source/l/libtiff/tiff-3.8.2.tiffsplit.commandline.overflow.diff deleted file mode 100644 index feb693fab..000000000 --- a/source/l/libtiff/tiff-3.8.2.tiffsplit.commandline.overflow.diff +++ /dev/null @@ -1,22 +0,0 @@ ---- ./tools/tiffsplit.c.orig 2005-12-07 03:48:33.000000000 -0600 -+++ ./tools/tiffsplit.c 2006-08-17 22:03:36.000000000 -0500 -@@ -60,14 +60,16 @@ - fprintf(stderr, "usage: tiffsplit input.tif [prefix]\n"); - return (-3); - } -- if (argc > 2) -- strcpy(fname, argv[2]); -+ if (argc > 2) { -+ strncpy(fname, argv[2], 1024); -+ fname[1024] = '\0'; -+ } - in = TIFFOpen(argv[1], "r"); - if (in != NULL) { - do { - char path[1024+1]; - newfilename(); -- strcpy(path, fname); -+ strncpy(path, fname, 1020); - strcat(path, ".tif"); - out = TIFFOpen(path, TIFFIsBigEndian(in)?"wb":"wl"); - if (out == NULL) diff --git a/source/l/libusb/libusb.SlackBuild b/source/l/libusb/libusb.SlackBuild index 90db52ffa..67d0756a7 100755 --- a/source/l/libusb/libusb.SlackBuild +++ b/source/l/libusb/libusb.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,9 +21,22 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=${VERSION:-0.1.12} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +VERSION=${VERSION:-1.0.6} # libusb version +USBCOMPAT=${USBCOMPAT:-0.1.3} # libusb-compat version + +BUILD=${BUILD:-1} + +NUMJOBS=${NUMJOBS:--j6} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi CWD=$(pwd) TMP=${TMP:-/tmp} @@ -38,20 +51,60 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG -mkdir -p $PKG +mkdir -p $TMP $PKG + +# First we'll do the main libusb stuff cd $TMP rm -rf libusb-$VERSION -tar xzvf $CWD/libusb-$VERSION.tar.gz +tar xvf $CWD/libusb-$VERSION.tar.bz2 cd libusb-$VERSION +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; -# We used to apply a Debian patch here, and it's possible -# that other archs need it still, but vanilla upstream is -# working on ia32 just fine. -#zcat $CWD/libusb_0.1.12-2.diff.gz | patch -p1 +CFLAGS="$SLKCFLAGS" \ +./configure \ + --prefix=/usr \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --mandir=/usr/man \ + --docdir=/usr/doc/libusb-$VERSION \ + --disable-static \ + --build=$ARCH-slackware-linux +make $NUMJOBS || make || exit 1 +make install DESTDIR=$PKG +if [ ! -r /usr/lib${LIBDIRSUFFIX}/pkgconfig/libusb-1.0.pc ]; then + # We have to install this to proceed: + make install +fi + +mkdir -p $PKG/usr/doc/libusb-$VERSION +cp -a \ + AUTHORS COPYING INSTALL NEWS PORTING README THANKS TODO \ + $PKG/usr/doc/libusb-$VERSION + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/libusb-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + +# Now build the libusb-compat stuff +cd $TMP +rm -rf libusb-compat-$USBCOMPAT +tar xvf $CWD/libusb-compat-$USBCOMPAT.tar.bz2 +cd libusb-compat-$USBCOMPAT chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -62,14 +115,34 @@ find . \ CFLAGS="$SLKCFLAGS" \ ./configure \ --prefix=/usr \ - --libdir=/usr/lib${LIBDIRSUFFIX} + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --mandir=/usr/man \ + --docdir=/usr/doc/libusb-$VERSION \ + --disable-static \ + --build=$ARCH-slackware-linux -make -j3 || exit 1 +make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG +mkdir -p $PKG/usr/doc/libusb-$VERSION/libusb-compat-$USBCOMPAT +cp -a \ + AUTHORS COPYING INSTALL LICENSE NEWS README \ + $PKG/usr/doc/libusb-$VERSION/libusb-compat-$USBCOMPAT + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/libusb-compat-$USBCOMPAT) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + +# Now handle the package-wide stuff ( cd $PKG - find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | \ + xargs strip --strip-unneeded 2> /dev/null + find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | \ + xargs strip --strip-unneeded 2> /dev/null ) # Compress and if needed symlink the man pages: @@ -87,15 +160,9 @@ if [ -d $PKG/usr/man ]; then ) fi -mkdir -p $PKG/usr/doc/libusb-$VERSION -cp -a \ - AUTHORS COPYING ChangeLog INSTALL.libusb LICENSE NEWS README \ - doc/html \ - $PKG/usr/doc/libusb-$VERSION - mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -makepkg -l y -c n $TMP/libusb-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/libusb-$VERSION-$ARCH-$BUILD.txz diff --git a/source/l/libusb/slack-desc b/source/l/libusb/slack-desc index df9a5b252..e1a8b5dfd 100644 --- a/source/l/libusb/slack-desc +++ b/source/l/libusb/slack-desc @@ -10,10 +10,10 @@ libusb: libusb (USB library) libusb: libusb: This is libusb, a library which allows userspace application access libusb: to USB devices. It is used to connect to USB devices like scanners. +libusb: http://libusb.org/wiki/Libusb1.0 libusb: -libusb: -libusb: -libusb: +libusb: This package also contains libusb-compat for the "old" libusb users. +libusb: http://libusb.org/wiki/LibusbCompat0.1 libusb: libusb: libusb: diff --git a/source/l/libvncserver/libvncserver.SlackBuild b/source/l/libvncserver/libvncserver.SlackBuild index b73d8e77c..87712a13f 100755 --- a/source/l/libvncserver/libvncserver.SlackBuild +++ b/source/l/libvncserver/libvncserver.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh # Copyright 2007 Heinz Wiesinger <hmwiesinger@gmx.at> -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -25,8 +25,17 @@ VERSION=0.9.7 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-1} +BUILD=${BUILD:-2} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi NUMJOBS=${NUMJOBS:--j6} @@ -43,13 +52,16 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG mkdir -p $TMP $PKG cd $TMP rm -rf LibVNCServer-$VERSION -tar xvf $CWD/LibVNCServer-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/LibVNCServer-$VERSION.tar.?z* || exit 1 cd LibVNCServer-$VERSION || exit 1 chown -R root:root . find . \ @@ -84,6 +96,14 @@ cp -a \ AUTHORS COPYING* INSTALL NEWS README TODO \ $PKG/usr/doc/libvncserver-$VERSION +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/l/libvorbis/libvorbis.SlackBuild b/source/l/libvorbis/libvorbis.SlackBuild index 9196270a4..0aacb1a66 100755 --- a/source/l/libvorbis/libvorbis.SlackBuild +++ b/source/l/libvorbis/libvorbis.SlackBuild @@ -21,12 +21,21 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=1.2.0 -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-$(echo libvorbis-*.tar.?z* | cut -d - -f 2 | rev | cut -f 3- -d . | rev)} BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:-" -j7 "} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" @@ -36,6 +45,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -46,7 +58,7 @@ rm -rf $PKG mkdir -p $TMP $PKG cd $TMP rm -rf libvorbis-$VERSION -tar xvf $CWD/libvorbis-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/libvorbis-$VERSION.tar.?z* || exit 1 cd libvorbis-$VERSION chown -R root:root . find . \ @@ -60,6 +72,7 @@ CXXFLAGS="$SLKCFLAGS" \ ./configure \ --prefix=/usr \ --libdir=/usr/lib${LIBDIRSUFFIX} \ + --disable-static \ --build=$ARCH-slackware-linux make $NUMJOBS || make || exit 1 diff --git a/source/l/libwmf/libwmf.SlackBuild b/source/l/libwmf/libwmf.SlackBuild index c9428e23c..77027ac8f 100755 --- a/source/l/libwmf/libwmf.SlackBuild +++ b/source/l/libwmf/libwmf.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,9 +22,17 @@ VERSION=0.2.8.4 -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} -BUILD=${BUILD:-4} +BUILD=${BUILD:-5} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -35,8 +43,12 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi +NUMJOBS=${NUMJOBS:-" -j7 "} CWD=$(pwd) TMP=${TMP:-/tmp} @@ -48,8 +60,11 @@ mkdir -p $PKG1 $PKG2 cd $TMP rm -rf libwmf-$VERSION -tar xvf $CWD/libwmf-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/libwmf-$VERSION.tar.?z* || exit 1 cd libwmf-$VERSION + +zcat $CWD/libwmf.png14.diff.gz | patch -p1 --verbose || exit 1 + chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -77,6 +92,14 @@ cp -a \ AUTHORS BUILDING COPYING CREDITS NEWS README TODO \ $PKG1/usr/doc/libwmf-$VERSION +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG1/install cat $CWD/slack-desc > $PKG1/install/slack-desc mkdir -p $PKG2/install diff --git a/source/l/libwmf/libwmf.png14.diff b/source/l/libwmf/libwmf.png14.diff new file mode 100644 index 000000000..c55b143c8 --- /dev/null +++ b/source/l/libwmf/libwmf.png14.diff @@ -0,0 +1,11 @@ +--- ./src/extra/gd/gd_png.c.orig 2005-07-27 15:35:06.000000000 -0500 ++++ ./src/extra/gd/gd_png.c 2010-02-14 18:24:19.000000000 -0600 +@@ -136,7 +136,7 @@ + /* first do a quick check that the file really is a PNG image; could + * have used slightly more general png_sig_cmp() function instead */ + gdGetBuf (sig, 8, infile); +- if (!png_check_sig (sig, 8)) ++ if (!(png_sig_cmp(sig, 0, 8) == 0)) + return NULL; /* bad signature */ + + #ifndef PNG_SETJMP_NOT_SUPPORTED diff --git a/source/l/libwnck/libwnck.SlackBuild b/source/l/libwnck/libwnck.SlackBuild index fef9b01c0..982b40527 100755 --- a/source/l/libwnck/libwnck.SlackBuild +++ b/source/l/libwnck/libwnck.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,11 +21,21 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=2.26.1 -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} +VERSION=${VERSION:-$(echo libwnck-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +NUMJOBS=${NUMJOBS:-" -j7 "} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" @@ -35,6 +45,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -74,6 +87,14 @@ cp -a \ AUTHORS COPYING* NEWS README \ $PKG/usr/doc/libwnck-$VERSION +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + # Compress and link manpages, if any: if [ -d $PKG/usr/man ]; then ( cd $PKG/usr/man diff --git a/source/l/libxklavier/libxklavier.SlackBuild b/source/l/libxklavier/libxklavier.SlackBuild index 5b7bc76b1..cc38a5d53 100755 --- a/source/l/libxklavier/libxklavier.SlackBuild +++ b/source/l/libxklavier/libxklavier.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh # Copyright 2007-2008 Heinz Wiesinger <pprkut@liwjatan.at> -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -23,12 +23,20 @@ # Modified by Robby Workman <rworkman at slackware.com> +VERSION=${VERSION:-$(echo libxklavier-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} -VERSION=3.9 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} NUMJOBS=${NUMJOBS:--j6} +# Automatically determine architecture for build & packaging: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-libxklavier @@ -42,13 +50,16 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG mkdir -p $TMP $PKG cd $TMP rm -rf libxklavier-$VERSION -tar xvf $CWD/libxklavier-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/libxklavier-$VERSION.tar.?z* || exit 1 cd libxklavier-$VERSION || exit 1 chown -R root:root . find . \ @@ -65,6 +76,7 @@ CXXFLAGS="$SLKCFLAGS" \ --sysconfdir=/etc \ --localstatedir=/var \ --disable-static \ + --with-xkb-base=/etc/X11/xkb \ --build=$ARCH-slackware-linux make $NUMJOBS || make || exit 1 @@ -75,12 +87,20 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" \ mkdir -p $PKG/usr/doc/libxklavier-$VERSION cp -a \ - AUTHORS ChangeLog COPYING* CREDITS INSTALL NEWS README \ + AUTHORS COPYING* CREDITS INSTALL NEWS README \ $PKG/usr/doc/libxklavier-$VERSION ( cd $PKG/usr/doc/libxklavier-$VERSION ln -s /usr/share/gtk-doc/html/libxklavier html ) +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/l/libxml2/libxml2.SlackBuild b/source/l/libxml2/libxml2.SlackBuild index 27c2b80a6..0bfe3f1f8 100755 --- a/source/l/libxml2/libxml2.SlackBuild +++ b/source/l/libxml2/libxml2.SlackBuild @@ -21,9 +21,18 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=2.7.3 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-3} +VERSION=2.7.6 +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi NUMJOBS=${NUMJOBS:-" -j7 "} diff --git a/source/l/libxslt/libxslt.SlackBuild b/source/l/libxslt/libxslt.SlackBuild index 0c7e050c8..225c40937 100755 --- a/source/l/libxslt/libxslt.SlackBuild +++ b/source/l/libxslt/libxslt.SlackBuild @@ -21,9 +21,18 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=1.1.24 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +VERSION=1.1.26 +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi NUMJOBS=${NUMJOBS:-" -j7 "} @@ -46,7 +55,7 @@ mkdir -p $TMP $PKG cd $TMP rm -rf libxslt-$VERSION -tar xvf $CWD/libxslt-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/libxslt-$VERSION.tar.?z* || exit 1 cd libxslt-$VERSION chown -R root:root . find . \ diff --git a/source/l/loudmouth/loudmouth.SlackBuild b/source/l/loudmouth/loudmouth.SlackBuild new file mode 100755 index 000000000..650bd1699 --- /dev/null +++ b/source/l/loudmouth/loudmouth.SlackBuild @@ -0,0 +1,138 @@ +#!/bin/sh +# Copyright 2009 Eric Hameleers, Eindhoven, NL +# All rights reserved. +# +# Permission to use, copy, modify, and distribute this software for +# any purpose with or without fee is hereby granted, provided that +# the above copyright notice and this permission notice appear in all +# copies. +# +# THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +# IN NO EVENT SHALL THE AUTHORS AND COPYRIGHT HOLDERS AND THEIR +# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF +# USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND +# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +# OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT +# OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF +# SUCH DAMAGE. +# ----------------------------------------------------------------------------- + +PKGNAM=loudmouth +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} + +NUMJOBS=${NUMJOBS:" -j4 "} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + SLKLDFLAGS="" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "s390" ]; then + SLKCFLAGS="-O2" + SLKLDFLAGS="" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + SLKLDFLAGS="-L/usr/lib64" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + SLKLDFLAGS="" + LIBDIRSUFFIX="" +fi + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-$PKGNAM + +rm -rf $PKG +mkdir -p $TMP $PKG +cd $TMP +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1 +cd $PKGNAM-$VERSION || exit 1 + +zcat $CWD/loudmouth.crtpath.diff.gz | patch -p1 --verbose || exit 1 +zcat $CWD/loudmouth.gnutls.configure.ac.diff.gz | patch -p1 --verbose || exit 1 +zcat $CWD/loudmouth.async_assertion.diff.gz | patch -p1 --verbose || exit 1 +zcat $CWD/loudmouth.sasl-md5-digest-uri.diff.gz | patch -p1 --verbose || exit 1 +zcat $CWD/loudmouth.stanzadrop.diff.gz | patch -p1 --verbose || exit 1 + +# needed after the configure.ac gnutls patch +autoreconf + +# Make sure ownerships and permissions are sane: +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +# Configure: +CFLAGS="$SLKCFLAGS" \ +CXXFLAGS="$SLKCFLAGS" \ +LDFLAGS="$SLKLDFLAGS" \ +./configure \ + --prefix=/usr \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --sysconfdir=/etc \ + --mandir=/usr/man \ + --docdir=/usr/doc/$PKGNAM-$VERSION \ + --with-ssl=gnutls \ + --enable-debug=no \ + --enable-static=no \ + --program-prefix= \ + --program-suffix= \ + --build=$ARCH-slackware-linux \ + --host=$ARCH-slackware-linux + +# this generates a broken libtool, so use the system version: +cp /usr/bin/libtool . + +# Build and install: +make $NUMJOBS || make || exit 1 +make install DESTDIR=$PKG + +# --enable-static is often ignored +rm -f $PKG/usr/lib${LIBDIRSUFFIX}/lib*.a + +# Strip binaries: +find $PKG | xargs file | grep -e "executable" -e "shared object" \ + | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + +# Add a documentation directory: +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION +cp -a \ + AUTHORS CONTRIBUTORS COPYING* NEWS README* \ + $PKG/usr/doc/$PKGNAM-$VERSION + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + +# Add a package description: +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc + +# Build package: +cd $PKG +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/l/loudmouth/loudmouth.async_assertion.diff b/source/l/loudmouth/loudmouth.async_assertion.diff new file mode 100644 index 000000000..bda1d19b1 --- /dev/null +++ b/source/l/loudmouth/loudmouth.async_assertion.diff @@ -0,0 +1,19 @@ +diff -urp loudmouth-1.4.3.OLD/loudmouth/lm-socket.c loudmouth-1.4.3/loudmouth/lm-socket.c +--- loudmouth-1.4.3.OLD/loudmouth/lm-socket.c 2008-10-29 12:29:16.000000000 -0400 ++++ loudmouth-1.4.3/loudmouth/lm-socket.c 2008-11-28 19:24:04.000000000 -0500 +@@ -1107,6 +1107,7 @@ lm_socket_create (GMainContext *con + _lm_socket_create_phase1 (socket, NULL, 0); + } + ++#ifndef HAVE_ASYNCNS + if (socket->connect_data == NULL) { + /* Open failed synchronously, probably a DNS lookup problem */ + lm_socket_unref(socket); +@@ -1118,6 +1119,7 @@ lm_socket_create (GMainContext *con + + return NULL; + } ++#endif + + + /* If the connection fails synchronously, we don't want to call the diff --git a/source/l/loudmouth/loudmouth.crtpath.diff b/source/l/loudmouth/loudmouth.crtpath.diff new file mode 100644 index 000000000..ada600405 --- /dev/null +++ b/source/l/loudmouth/loudmouth.crtpath.diff @@ -0,0 +1,11 @@ +--- loudmouth-1.4.3/loudmouth/lm-ssl-gnutls.c.orig 2008-10-29 14:45:10.000000000 +0100 ++++ loudmouth-1.4.3/loudmouth/lm-ssl-gnutls.c 2009-11-03 23:49:02.000000000 +0100 +@@ -32,7 +32,7 @@ + + #include <gnutls/x509.h> + +-#define CA_PEM_FILE "/etc/ssl/certs/ca-certificates.crt" ++#define CA_PEM_FILE "/usr/share/curl/ca-bundle.crt" + + struct _LmSSL { + LmSSLBase base; diff --git a/source/l/loudmouth/loudmouth.gnutls.configure.ac.diff b/source/l/loudmouth/loudmouth.gnutls.configure.ac.diff new file mode 100644 index 000000000..6719141f5 --- /dev/null +++ b/source/l/loudmouth/loudmouth.gnutls.configure.ac.diff @@ -0,0 +1,20 @@ +--- ./configure.ac.orig 2008-10-29 15:23:52.000000000 -0500 ++++ ./configure.ac 2010-04-10 15:42:12.000000000 -0500 +@@ -146,10 +146,13 @@ + enable_ssl=no + if test "x$ac_ssl" = "xgnutls"; then + dnl Look for GnuTLS +- AM_PATH_LM_LIBGNUTLS($GNUTLS_REQUIRED, have_libgnutls=yes, have_libgnutls=no) +- if test "x$have_libgnutls" = "xyes"; then +- CFLAGS="$CFLAGS $LIBGNUTLS_CFLAGS" +- LIBS="$LIBS $LIBGNUTLS_LIBS" ++ ++ PKG_CHECK_MODULES(GNUTLS, gnutls >= $GNUTLS_REQUIRED, have_gnutls=yes, have_gnutls=no) ++ if test "x$have_gnutls" = "xyes"; then ++ AC_SUBST(ASYNCNS_CFLAGS) ++ AC_SUBST(ASYNCNS_LIBS) ++ CFLAGS="$CFLAGS $GNUTLS_CFLAGS" ++ LIBS="$LIBS $GNUTLS_LIBS" + AC_DEFINE(HAVE_GNUTLS, 1, [whether to use GnuTSL support.]) + enable_ssl=GnuTLS + else diff --git a/source/l/loudmouth/loudmouth.sasl-md5-digest-uri.diff b/source/l/loudmouth/loudmouth.sasl-md5-digest-uri.diff new file mode 100644 index 000000000..50c796e87 --- /dev/null +++ b/source/l/loudmouth/loudmouth.sasl-md5-digest-uri.diff @@ -0,0 +1,22 @@ +diff -urp loudmouth-1.4.3.OLD/loudmouth/lm-connection.c loudmouth-1.4.3/loudmouth/lm-connection.c +--- loudmouth-1.4.3.OLD/loudmouth/lm-connection.c 2008-10-29 16:38:26.000000000 -0400 ++++ loudmouth-1.4.3/loudmouth/lm-connection.c 2009-06-12 19:13:03.183960144 -0400 +@@ -1442,10 +1442,17 @@ lm_connection_authenticate (LmConnection + connection->jid, connection->resource); + + if (connection->use_sasl) { ++ gchar *domain = NULL; ++ ++ if (!connection_get_server_from_jid (connection->jid, &domain)) { ++ domain = g_strdup (connection->server); ++ } ++ + lm_sasl_authenticate (connection->sasl, + username, password, +- connection->server, ++ domain, + connection_sasl_auth_finished); ++ g_free (domain); + + connection->features_cb = + lm_message_handler_new (connection_features_cb, diff --git a/source/l/loudmouth/loudmouth.stanzadrop.diff b/source/l/loudmouth/loudmouth.stanzadrop.diff new file mode 100644 index 000000000..87b86a998 --- /dev/null +++ b/source/l/loudmouth/loudmouth.stanzadrop.diff @@ -0,0 +1,45 @@ +From: Sjoerd Simons <sjoerd.simons@collabora.co.uk> +Date: Tue, 13 Jan 2009 11:28:44 +0000 +Subject: [PATCH] Drop stanzas when failing to convert them to LmMessages + +when a stanza comes in that for some reason can't be parsed into an LmMessage, +just drop them on the floor instead of blocking the parser. I've seen this +issue happen in practise because some (buggy?) client sending an iq with a +prefix e.g. <client:iq xmlns:client="jabber:client" ... /> +--- + loudmouth/lm-parser.c | 15 ++++++--------- + 1 files changed, 6 insertions(+), 9 deletions(-) + +diff --git a/loudmouth/lm-parser.c b/loudmouth/lm-parser.c +index 1938d56..89f6675 100644 +--- a/loudmouth/lm-parser.c ++++ b/loudmouth/lm-parser.c +@@ -151,19 +151,16 @@ parser_end_node_cb (GMarkupParseContext *context, + if (!m) { + g_warning ("Couldn't create message: %s\n", + parser->cur_root->name); +- return; +- } +- +- g_log (LM_LOG_DOMAIN, LM_LOG_LEVEL_PARSER, ++ } else { ++ g_log (LM_LOG_DOMAIN, LM_LOG_LEVEL_PARSER, + "Have a new message\n"); +- if (parser->function) { +- (* parser->function) (parser, m, parser->user_data); ++ if (parser->function) { ++ (* parser->function) (parser, m, parser->user_data); ++ } ++ lm_message_unref (m); + } + +- lm_message_unref (m); + lm_message_node_unref (parser->cur_root); +- +- + parser->cur_node = parser->cur_root = NULL; + } else { + LmMessageNode *tmp_node; +-- +1.5.6.5 + diff --git a/source/l/loudmouth/slack-desc b/source/l/loudmouth/slack-desc new file mode 100644 index 000000000..00f7c03f5 --- /dev/null +++ b/source/l/loudmouth/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler------------------------------------------------------| +loudmouth: loudmouth (XMPP C programming library) +loudmouth: +loudmouth: Loudmouth is a lightweight and easy-to-use C library for programming +loudmouth: with the Jabber protocol. It is designed to be easy to get started +loudmouth: with, and yet extensible enough to allow you to do anything that the +loudmouth: Jabber protocol allows. +loudmouth: +loudmouth: loudmouth home: http://www.loudmouth-project.org/ +loudmouth: +loudmouth: +loudmouth: diff --git a/source/l/mpfr/mpfr.SlackBuild b/source/l/mpfr/mpfr.SlackBuild index 588962bdb..808cbdacb 100755 --- a/source/l/mpfr/mpfr.SlackBuild +++ b/source/l/mpfr/mpfr.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,10 +21,19 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=2.3.1 -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-$(echo mpfr-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + NUMJOBS=${NUMJOBS:-" -j7 "} if [ "$ARCH" = "i486" ]; then @@ -36,6 +45,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -52,11 +64,11 @@ fi cd $TMP rm -rf mpfr-$VERSION -tar xvf $CWD/mpfr-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/mpfr-$VERSION.tar.?z* || exit 1 cd mpfr-$VERSION chown -R root:root . for file in $CWD/patches/* ; do - ( zcat $file 2> /dev/null | patch -p1 --verbose --batch 1> /dev/null 2> /dev/null || exit 1 ) + ( zcat $file 2> /dev/null | patch -p1 --verbose --batch 2> /dev/null || exit 1 ) if [ ! $? = 0 ]; then exit 1 fi @@ -66,6 +78,7 @@ CFLAGS="$SLKCFLAGS" \ --prefix=/usr \ --libdir=/usr/lib${LIBDIRSUFFIX} \ --infodir=/usr/info \ + --docdir=/usr/doc/mpfr-$VERSION \ --enable-static=yes \ --enable-shared=yes \ $ARCH-slackware-linux @@ -85,6 +98,7 @@ gzip -9 $PKG/usr/info/* mkdir -p $PKG/usr/doc/mpfr-$VERSION cp -a \ AUTHORS BUGS COPYING COPYING.LIB FAQ.html INSTALL NEWS README TODO VERSION \ + examples \ $PKG/usr/doc/mpfr-$VERSION mkdir -p $PKG/install diff --git a/source/l/mpfr/patches/patch01 b/source/l/mpfr/patches/patch01 new file mode 100644 index 000000000..2721517c4 --- /dev/null +++ b/source/l/mpfr/patches/patch01 @@ -0,0 +1,184 @@ +diff -Naurd mpfr-2.4.2-a/PATCHES mpfr-2.4.2-b/PATCHES +--- mpfr-2.4.2-a/PATCHES 2009-12-07 13:37:12.000000000 +0000 ++++ mpfr-2.4.2-b/PATCHES 2009-12-07 13:37:12.000000000 +0000 +@@ -0,0 +1 @@ ++sin_cos_underflow +diff -Naurd mpfr-2.4.2-a/VERSION mpfr-2.4.2-b/VERSION +--- mpfr-2.4.2-a/VERSION 2009-11-30 02:43:08.000000000 +0000 ++++ mpfr-2.4.2-b/VERSION 2009-12-07 13:37:12.000000000 +0000 +@@ -1 +1 @@ +-2.4.2 ++2.4.2-p1 +diff -Naurd mpfr-2.4.2-a/mpfr.h mpfr-2.4.2-b/mpfr.h +--- mpfr-2.4.2-a/mpfr.h 2009-11-30 02:43:08.000000000 +0000 ++++ mpfr-2.4.2-b/mpfr.h 2009-12-07 13:37:12.000000000 +0000 +@@ -27,7 +27,7 @@ + #define MPFR_VERSION_MAJOR 2 + #define MPFR_VERSION_MINOR 4 + #define MPFR_VERSION_PATCHLEVEL 2 +-#define MPFR_VERSION_STRING "2.4.2" ++#define MPFR_VERSION_STRING "2.4.2-p1" + + /* Macros dealing with MPFR VERSION */ + #define MPFR_VERSION_NUM(a,b,c) (((a) << 16L) | ((b) << 8) | (c)) +diff -Naurd mpfr-2.4.2-a/sin_cos.c mpfr-2.4.2-b/sin_cos.c +--- mpfr-2.4.2-a/sin_cos.c 2009-11-30 02:43:09.000000000 +0000 ++++ mpfr-2.4.2-b/sin_cos.c 2009-12-07 13:37:12.000000000 +0000 +@@ -82,17 +82,19 @@ + if (y != x) + /* y and x differ, thus we can safely try to compute y first */ + { +- MPFR_FAST_COMPUTE_IF_SMALL_INPUT (y, x, -2 * expx, 2, 0, rnd_mode, +- { inexy = _inexact; +- goto small_input; }); ++ MPFR_FAST_COMPUTE_IF_SMALL_INPUT ( ++ y, x, -2 * expx, 2, 0, rnd_mode, ++ { inexy = _inexact; ++ goto small_input; }); + if (0) + { + small_input: + /* we can go here only if we can round sin(x) */ +- MPFR_FAST_COMPUTE_IF_SMALL_INPUT (z, __gmpfr_one, -2 * expx, +- 1, 0, rnd_mode, +- { inexz = _inexact; +- goto end; }); ++ MPFR_FAST_COMPUTE_IF_SMALL_INPUT ( ++ z, __gmpfr_one, -2 * expx, 1, 0, rnd_mode, ++ { inexz = _inexact; ++ MPFR_SAVE_EXPO_UPDATE_FLAGS (expo, __gmpfr_flags); ++ goto end; }); + } + + /* if we go here, one of the two MPFR_FAST_COMPUTE_IF_SMALL_INPUT +@@ -101,18 +103,19 @@ + else /* y and x are the same variable: try to compute z first, which + necessarily differs */ + { +- MPFR_FAST_COMPUTE_IF_SMALL_INPUT (z, __gmpfr_one, -2 * expx, +- 1, 0, rnd_mode, +- { inexz = _inexact; +- goto small_input2; }); ++ MPFR_FAST_COMPUTE_IF_SMALL_INPUT ( ++ z, __gmpfr_one, -2 * expx, 1, 0, rnd_mode, ++ { inexz = _inexact; ++ goto small_input2; }); + if (0) + { + small_input2: + /* we can go here only if we can round cos(x) */ +- MPFR_FAST_COMPUTE_IF_SMALL_INPUT (y, x, -2 * expx, 2, 0, +- rnd_mode, +- { inexy = _inexact; +- goto end; }); ++ MPFR_FAST_COMPUTE_IF_SMALL_INPUT ( ++ y, x, -2 * expx, 2, 0, rnd_mode, ++ { inexy = _inexact; ++ MPFR_SAVE_EXPO_UPDATE_FLAGS (expo, __gmpfr_flags); ++ goto end; }); + } + } + m += 2 * (-expx); +@@ -207,7 +210,6 @@ + mpfr_clear (xr); + + end: +- /* FIXME: update the underflow flag if need be. */ + MPFR_SAVE_EXPO_FREE (expo); + mpfr_check_range (y, inexy, rnd_mode); + mpfr_check_range (z, inexz, rnd_mode); +diff -Naurd mpfr-2.4.2-a/tests/tsin_cos.c mpfr-2.4.2-b/tests/tsin_cos.c +--- mpfr-2.4.2-a/tests/tsin_cos.c 2009-11-30 02:43:08.000000000 +0000 ++++ mpfr-2.4.2-b/tests/tsin_cos.c 2009-12-07 13:37:12.000000000 +0000 +@@ -382,23 +382,56 @@ + consistency (void) + { + mpfr_t x, s1, s2, c1, c2; ++ mp_exp_t emin, emax; + mp_rnd_t rnd; ++ unsigned int flags_sin, flags_cos, flags, flags_before, flags_ref; ++ int inex_sin, inex_cos, inex, inex_ref; + int i; + ++ emin = mpfr_get_emin (); ++ emax = mpfr_get_emax (); ++ + for (i = 0; i <= 10000; i++) + { + mpfr_init2 (x, MPFR_PREC_MIN + (randlimb () % 8)); + mpfr_inits2 (MPFR_PREC_MIN + (randlimb () % 8), s1, s2, c1, c2, + (mpfr_ptr) 0); +- tests_default_random (x, 256, -5, 50); +- rnd = RND_RAND (); +- mpfr_sin (s1, x, rnd); +- mpfr_cos (c1, x, rnd); +- mpfr_sin_cos (s2, c2, x, rnd); +- if (!(mpfr_equal_p (s1, s2) && mpfr_equal_p (c1, c2))) ++ if (i < 8 * GMP_RND_MAX) + { +- printf ("mpfr_sin_cos and mpfr_sin/mpfr_cos disagree on %s,\nx = ", +- mpfr_print_rnd_mode (rnd)); ++ int j = i / GMP_RND_MAX; ++ if (j & 1) ++ mpfr_set_emin (MPFR_EMIN_MIN); ++ mpfr_set_si (x, (j & 2) ? 1 : -1, GMP_RNDN); ++ mpfr_set_exp (x, mpfr_get_emin ()); ++ rnd = (mpfr_rnd_t) (i % GMP_RND_MAX); ++ flags_before = 0; ++ if (j & 4) ++ mpfr_set_emax (-17); ++ } ++ else ++ { ++ tests_default_random (x, 256, -5, 50); ++ rnd = RND_RAND (); ++ flags_before = (randlimb () & 1) ? ++ (unsigned int) (MPFR_FLAGS_ALL ^ MPFR_FLAGS_ERANGE) : ++ (unsigned int) 0; ++ } ++ __gmpfr_flags = flags_before; ++ inex_sin = mpfr_sin (s1, x, rnd); ++ flags_sin = __gmpfr_flags; ++ __gmpfr_flags = flags_before; ++ inex_cos = mpfr_cos (c1, x, rnd); ++ flags_cos = __gmpfr_flags; ++ __gmpfr_flags = flags_before; ++ inex = !!mpfr_sin_cos (s2, c2, x, rnd); ++ flags = __gmpfr_flags; ++ inex_ref = inex_sin || inex_cos; ++ flags_ref = flags_sin | flags_cos; ++ if (!(mpfr_equal_p (s1, s2) && mpfr_equal_p (c1, c2)) || ++ inex != inex_ref || flags != flags_ref) ++ { ++ printf ("mpfr_sin_cos and mpfr_sin/mpfr_cos disagree on %s," ++ " i = %d\nx = ", mpfr_print_rnd_mode (rnd), i); + mpfr_dump (x); + printf ("s1 = "); + mpfr_dump (s1); +@@ -408,9 +441,16 @@ + mpfr_dump (c1); + printf ("c2 = "); + mpfr_dump (c2); ++ printf ("inex_sin = %d, inex_cos = %d, inex = %d (expected %d)\n", ++ inex_sin, inex_cos, inex, inex_ref); ++ printf ("flags_sin = 0x%x, flags_cos = 0x%x, " ++ "flags = 0x%x (expected 0x%x)\n", ++ flags_sin, flags_cos, flags, flags_ref); + exit (1); + } + mpfr_clears (x, s1, s2, c1, c2, (mpfr_ptr) 0); ++ mpfr_set_emin (emin); ++ mpfr_set_emax (emax); + } + } + +diff -Naurd mpfr-2.4.2-a/version.c mpfr-2.4.2-b/version.c +--- mpfr-2.4.2-a/version.c 2009-11-30 02:43:08.000000000 +0000 ++++ mpfr-2.4.2-b/version.c 2009-12-07 13:37:12.000000000 +0000 +@@ -25,5 +25,5 @@ + const char * + mpfr_get_version (void) + { +- return "2.4.2"; ++ return "2.4.2-p1"; + } diff --git a/source/l/mpfr/patches/patch02 b/source/l/mpfr/patches/patch02 new file mode 100644 index 000000000..fa85d8ef3 --- /dev/null +++ b/source/l/mpfr/patches/patch02 @@ -0,0 +1,71 @@ +diff -Naurd mpfr-2.4.2-a/PATCHES mpfr-2.4.2-b/PATCHES +--- mpfr-2.4.2-a/PATCHES 2009-12-18 12:03:30.000000000 +0000 ++++ mpfr-2.4.2-b/PATCHES 2009-12-18 12:05:19.000000000 +0000 +@@ -0,0 +1 @@ ++longlong.h +diff -Naurd mpfr-2.4.2-a/VERSION mpfr-2.4.2-b/VERSION +--- mpfr-2.4.2-a/VERSION 2009-12-07 13:37:12.000000000 +0000 ++++ mpfr-2.4.2-b/VERSION 2009-12-18 12:05:09.000000000 +0000 +@@ -1 +1 @@ +-2.4.2-p1 ++2.4.2-p2 +diff -Naurd mpfr-2.4.2-a/mpfr-longlong.h mpfr-2.4.2-b/mpfr-longlong.h +--- mpfr-2.4.2-a/mpfr-longlong.h 2009-11-30 02:43:08.000000000 +0000 ++++ mpfr-2.4.2-b/mpfr-longlong.h 2009-12-18 12:04:29.000000000 +0000 +@@ -1011,7 +1011,15 @@ + #endif /* __m88000__ */ + + #if defined (__mips) && W_TYPE_SIZE == 32 +-#if __GNUC__ > 2 || __GNUC_MINOR__ >= 7 ++#if (__GNUC__ >= 5) || (__GNUC__ >= 4 && __GNUC_MINOR__ >= 4) ++#define umul_ppmm(w1, w0, u, v) \ ++ do { \ ++ UDItype _r; \ ++ _r = (UDItype) u * v; \ ++ (w1) = _r >> 32; \ ++ (w0) = (USItype) _r; \ ++ } while (0) ++#elif __GNUC__ > 2 || __GNUC_MINOR__ >= 7 + #define umul_ppmm(w1, w0, u, v) \ + __asm__ ("multu %2,%3" : "=l" (w0), "=h" (w1) : "d" (u), "d" (v)) + #else +@@ -1024,7 +1032,16 @@ + #endif /* __mips */ + + #if (defined (__mips) && __mips >= 3) && W_TYPE_SIZE == 64 +-#if __GNUC__ > 2 || __GNUC_MINOR__ >= 7 ++#if (__GNUC__ >= 5) || (__GNUC__ >= 4 && __GNUC_MINOR__ >= 4) ++typedef unsigned int UTItype __attribute__ ((mode (TI))); ++#define umul_ppmm(w1, w0, u, v) \ ++ do { \ ++ UTItype _r; \ ++ _r = (UTItype) u * v; \ ++ (w1) = _r >> 64; \ ++ (w0) = (UDItype) _r; \ ++ } while (0) ++#elif __GNUC__ > 2 || __GNUC_MINOR__ >= 7 + #define umul_ppmm(w1, w0, u, v) \ + __asm__ ("dmultu %2,%3" : "=l" (w0), "=h" (w1) : "d" (u), "d" (v)) + #else +diff -Naurd mpfr-2.4.2-a/mpfr.h mpfr-2.4.2-b/mpfr.h +--- mpfr-2.4.2-a/mpfr.h 2009-12-07 13:37:12.000000000 +0000 ++++ mpfr-2.4.2-b/mpfr.h 2009-12-18 12:05:09.000000000 +0000 +@@ -27,7 +27,7 @@ + #define MPFR_VERSION_MAJOR 2 + #define MPFR_VERSION_MINOR 4 + #define MPFR_VERSION_PATCHLEVEL 2 +-#define MPFR_VERSION_STRING "2.4.2-p1" ++#define MPFR_VERSION_STRING "2.4.2-p2" + + /* Macros dealing with MPFR VERSION */ + #define MPFR_VERSION_NUM(a,b,c) (((a) << 16L) | ((b) << 8) | (c)) +diff -Naurd mpfr-2.4.2-a/version.c mpfr-2.4.2-b/version.c +--- mpfr-2.4.2-a/version.c 2009-12-07 13:37:12.000000000 +0000 ++++ mpfr-2.4.2-b/version.c 2009-12-18 12:05:09.000000000 +0000 +@@ -25,5 +25,5 @@ + const char * + mpfr_get_version (void) + { +- return "2.4.2-p1"; ++ return "2.4.2-p2"; + } diff --git a/source/l/mpfr/patches/patch03 b/source/l/mpfr/patches/patch03 new file mode 100644 index 000000000..3ce4952f2 --- /dev/null +++ b/source/l/mpfr/patches/patch03 @@ -0,0 +1,75 @@ +diff -Naurd mpfr-2.4.2-a/PATCHES mpfr-2.4.2-b/PATCHES +--- mpfr-2.4.2-a/PATCHES 2010-01-11 15:27:18.000000000 +0000 ++++ mpfr-2.4.2-b/PATCHES 2010-01-11 15:30:31.000000000 +0000 +@@ -0,0 +1 @@ ++gmp5 +diff -Naurd mpfr-2.4.2-a/VERSION mpfr-2.4.2-b/VERSION +--- mpfr-2.4.2-a/VERSION 2009-12-18 12:05:09.000000000 +0000 ++++ mpfr-2.4.2-b/VERSION 2010-01-11 15:29:40.000000000 +0000 +@@ -1 +1 @@ +-2.4.2-p2 ++2.4.2-p3 +diff -Naurd mpfr-2.4.2-a/configure mpfr-2.4.2-b/configure +--- mpfr-2.4.2-a/configure 2009-11-30 02:44:35.000000000 +0000 ++++ mpfr-2.4.2-b/configure 2010-01-11 15:28:56.000000000 +0000 +@@ -20449,6 +20449,9 @@ + main () + { + ++#ifndef BITS_PER_MP_LIMB ++#define BITS_PER_MP_LIMB GMP_LIMB_BITS ++#endif + return BITS_PER_MP_LIMB == BYTES_PER_MP_LIMB * CHAR_BIT + && sizeof(mp_limb_t) == BYTES_PER_MP_LIMB ? 0 : 1; + +diff -Naurd mpfr-2.4.2-a/configure.in mpfr-2.4.2-b/configure.in +--- mpfr-2.4.2-a/configure.in 2009-11-30 02:43:08.000000000 +0000 ++++ mpfr-2.4.2-b/configure.in 2009-11-30 02:43:08.000000000 +0000 +@@ -424,6 +424,9 @@ + #include "gmp.h" + #include "gmp-impl.h" + ]], [[ ++#ifndef BITS_PER_MP_LIMB ++#define BITS_PER_MP_LIMB GMP_LIMB_BITS ++#endif + return BITS_PER_MP_LIMB == BYTES_PER_MP_LIMB * CHAR_BIT + && sizeof(mp_limb_t) == BYTES_PER_MP_LIMB ? 0 : 1; + ]])], [AC_MSG_RESULT(yes)], [ +diff -Naurd mpfr-2.4.2-a/mpfr-impl.h mpfr-2.4.2-b/mpfr-impl.h +--- mpfr-2.4.2-a/mpfr-impl.h 2009-11-30 02:43:08.000000000 +0000 ++++ mpfr-2.4.2-b/mpfr-impl.h 2010-01-11 15:28:01.000000000 +0000 +@@ -65,6 +65,12 @@ + # ifndef __GMP_IMPL_H__ + # include "gmp-impl.h" + # endif ++# ifndef BITS_PER_MP_LIMB ++# define BITS_PER_MP_LIMB GMP_LIMB_BITS ++# endif ++#ifndef mpn_sqr_n ++# define mpn_sqr_n mpn_sqr ++#endif + # ifdef MPFR_NEED_LONGLONG_H + # include "longlong.h" + # endif +diff -Naurd mpfr-2.4.2-a/mpfr.h mpfr-2.4.2-b/mpfr.h +--- mpfr-2.4.2-a/mpfr.h 2009-12-18 12:05:09.000000000 +0000 ++++ mpfr-2.4.2-b/mpfr.h 2010-01-11 15:29:40.000000000 +0000 +@@ -27,7 +27,7 @@ + #define MPFR_VERSION_MAJOR 2 + #define MPFR_VERSION_MINOR 4 + #define MPFR_VERSION_PATCHLEVEL 2 +-#define MPFR_VERSION_STRING "2.4.2-p2" ++#define MPFR_VERSION_STRING "2.4.2-p3" + + /* Macros dealing with MPFR VERSION */ + #define MPFR_VERSION_NUM(a,b,c) (((a) << 16L) | ((b) << 8) | (c)) +diff -Naurd mpfr-2.4.2-a/version.c mpfr-2.4.2-b/version.c +--- mpfr-2.4.2-a/version.c 2009-12-18 12:05:09.000000000 +0000 ++++ mpfr-2.4.2-b/version.c 2010-01-11 15:29:40.000000000 +0000 +@@ -25,5 +25,5 @@ + const char * + mpfr_get_version (void) + { +- return "2.4.2-p2"; ++ return "2.4.2-p3"; + } diff --git a/source/l/neon/neon.SlackBuild b/source/l/neon/neon.SlackBuild index 511a0891b..896d885d1 100755 --- a/source/l/neon/neon.SlackBuild +++ b/source/l/neon/neon.SlackBuild @@ -22,10 +22,19 @@ PKGNAM=neon -VERSION=${VERSION:-0.28.4} -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-0.29.0} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + NUMJOBS=${NUMJOBS:-" -j7 "} if [ "$ARCH" = "i486" ]; then diff --git a/source/l/netpbm/Makefile.config b/source/l/netpbm/config.mk index d9bf909d5..f5ace50f0 100644 --- a/source/l/netpbm/Makefile.config +++ b/source/l/netpbm/config.mk @@ -8,9 +8,9 @@ # This file is meant to contain variable settings that customize the # build for a particular target system configuration. -# The distribution contains the file Makefile.config.in. You edit -# Makefile.config.in in ways relevant to your particular environment -# to create Makefile.config. The "configure" program will do this +# The distribution contains the file config.mk.in. You edit +# config.mk.in in ways relevant to your particular environment +# to create config.mk. The "configure" program will do this # for you in simple cases. # Some of the variables that the including make file must set for this @@ -101,6 +101,7 @@ HAVE_INT64 = Y CC_FOR_BUILD = $(CC) LD_FOR_BUILD = $(LD) CFLAGS_FOR_BUILD = $(CFLAGS) +LDFLAGS_FOR_BUILD = $(LDFLAGS) # MAKE is set automatically by Make to what was used to invoke Make. @@ -157,7 +158,7 @@ LEX = flex # -pedantic isn't a problem because it causes at worst a warning. #CFLAGS = -O3 -ffast-math -pedantic -fno-common \ # -Wall -Wno-uninitialized -Wmissing-declarations -Wimplicit \ -# -Wwrite-string -Wmissing-prototypes -Wundef +# -Wwrite-strings -Wmissing-prototypes -Wundef # The merged programs have a main_XXX subroutine instead of main(), # which would cause a warning with -Wmissing-declarations or # -Wmissing-prototypes. @@ -252,6 +253,17 @@ LDSHLIB = -shared -Wl,-soname,$(SONAME) #LDSHLIB = -shared #AIX Visual Age C: #LDSHLIB = -qmkshrobj +#Mac OSX: +# According to experiments done by Peter A Crowley in May 2007, if +# libnetpbm goes in a standard place such as /usr/local/lib, +# programs need not be built with libnetpbm's location included. +# But if it goes elsewhere, the link-editor must include the +# location in the executable. It finds the runtime location by +# looking inside the library. The information in the library +# comes from the install_name option with which the library was +# built. It's an alternative to the -rpath option on other systems. +#LDSHLIB=-dynamiclib +#LDSHLIB=-dynamiclib -install_name $(NETPBMLIB_RUNTIME_PATH)/libnetpbm.$(MAJ).dylib # LDRELOC is the command to combine two .o files (relocateable object files) # into a single .o file that can later be linked into something else. NONE @@ -285,7 +297,7 @@ LDRELOC = NONE # know why -- history seems to be repeating itself. 2005.02.23. CFLAGS_SHLIB = -# Solaris or SunOS with gcc, and NetBSD: +# Gcc: #CFLAGS_SHLIB = -fpic #CFLAGS_SHLIB = -fPIC # Sun compiler: @@ -306,7 +318,7 @@ CFLAGS_SHLIB = SHLIB_CLIB = -lc # SCO: -SHLIB_CLIB = +#SHLIB_CLIB = # On some systems you have to build into an executable the list of # directories where its dynamically linked libraries can be found at @@ -630,7 +642,7 @@ NETPBM_DOCURL = http://netpbm.sourceforge.net/doc/ -####Lines above were copied from Makefile.config.in by 'configure'. +####Lines above were copied from config.mk.in by 'configure'. ####Lines below were added by 'configure' based on the GNU platform. DEFAULT_TARGET = nonmerge NETPBMLIBTYPE=unixshared @@ -641,6 +653,7 @@ CFLAGS_MERGE = -Wno-missing-declarations -Wno-missing-prototypes LDRELOC = ld --reloc LINKER_CAN_DO_EXPLICIT_LIBRARY=Y LINKERISCOMPILER = Y +CFLAGS_SHLIB += -fPIC TIFFLIB = libtiff.so JPEGLIB = libjpeg.so ZLIB = libz.so diff --git a/source/l/netpbm/netpbm.SlackBuild b/source/l/netpbm/netpbm.SlackBuild index 0b6685c12..fedaffddb 100755 --- a/source/l/netpbm/netpbm.SlackBuild +++ b/source/l/netpbm/netpbm.SlackBuild @@ -22,10 +22,18 @@ PKGNAM=netpbm -VERSION=${VERSION:-10.35.22} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} - +VERSION=${VERSION:-10.49.02} +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -36,6 +44,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -46,7 +57,7 @@ mkdir -p $TMP # Do not create $PKG or 'make package' fails cd $TMP rm -rf ${PKGNAM}-${VERSION} -tar xvf $CWD/${PKGNAM}-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1 cd ${PKGNAM}-$VERSION # Make sure ownerships and permissions are sane: @@ -59,10 +70,10 @@ find . \ # Configure: if [ "$ARCH" = "x86_64" ]; then - zcat $CWD/Makefile.config.gz \ - | sed -e '/^CFLAGS/s/^CFLAGS = .*/& -fPIC/' > Makefile.config + zcat $CWD/config.mk.gz \ + | sed -e '/^CFLAGS/s/^CFLAGS = .*/& -fPIC/' > config.mk else - zcat $CWD/Makefile.config.gz > Makefile.config + zcat $CWD/config.mk.gz > config.mk fi # Build and install (does not like parallel build): @@ -109,9 +120,14 @@ fi # Add a documentation directory: ( cd doc cp -a \ - COPYRIGHT.PATENT GPL_LICENSE.txt HISTORY INSTALL Netpbm.programming \ + COPYRIGHT.PATENT GPL_LICENSE.txt INSTALL Netpbm.programming \ README* USERDOC copyright_summary lgpl_v21.txt \ $PKG/usr/doc/${PKGNAM}-$VERSION + if [ -r HISTORY ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat HISTORY | head -n 1000 > $DOCSDIR/HISTORY + touch -r HISTORY $DOCSDIR/HISTORY + fi ) mkdir -p $PKG/install diff --git a/source/l/notify-python/notify-python.SlackBuild b/source/l/notify-python/notify-python.SlackBuild new file mode 100755 index 000000000..97ce72183 --- /dev/null +++ b/source/l/notify-python/notify-python.SlackBuild @@ -0,0 +1,99 @@ +#!/bin/sh + +# Slackware build script for notify-python + +# Copyright 2009 Erik W. Hanson, Minneapolis, MN, USA +# Copyright 2010 Patrick J. Volkerding, Sebeka, MN, USA +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +PKGNAM=notify-python +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-$PKGNAM + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "i686" ]; then + SLKCFLAGS="-O2 -march=i686 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + +rm -rf $PKG +mkdir -p $TMP $PKG +cd $TMP +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1 +cd $PKGNAM-$VERSION || exit 1 +chown -R root:root . +chmod -R u+w,go+r-w,a-s . + +# Fix http://trac.galago-project.org/ticket/121 +rm -f src/pynotify.c + +CFLAGS="$SLKCFLAGS" \ +./configure \ + --prefix=/usr \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --sysconfdir=/etc \ + --localstatedir=/var \ + --build=$ARCH-slackware-linux + +make || exit 1 +make install-strip DESTDIR=$PKG || exit 1 + +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION +cp -a \ + AUTHORS COPYING INSTALL NEWS README \ + $PKG/usr/doc/$PKGNAM-$VERSION + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc + +cd $PKG +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz + diff --git a/source/l/notify-python/slack-desc b/source/l/notify-python/slack-desc new file mode 100644 index 000000000..3d52503b4 --- /dev/null +++ b/source/l/notify-python/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler-------------------------------------------------------| +notify-python: notify-python (Python bindings for libnotify) +notify-python: +notify-python: The notify-python package contains bindings to use libnotify with +notify-python: Python programs. +notify-python: +notify-python: Homepage for notify-python: http://www.galago-project.org/ +notify-python: +notify-python: +notify-python: +notify-python: +notify-python: diff --git a/source/l/pango/pango.SlackBuild b/source/l/pango/pango.SlackBuild index 79234a741..1ebe74383 100755 --- a/source/l/pango/pango.SlackBuild +++ b/source/l/pango/pango.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -20,13 +20,21 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -VERSION=1.22.4 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-4} +VERSION=${VERSION:-$(echo pango-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:-" -j7 "} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" @@ -36,18 +44,23 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-pango + rm -rf $PKG mkdir -p $TMP $PKG/usr - cd $TMP rm -rf pango-$VERSION -tar xvf $CWD/pango-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/pango-$VERSION.tar.?z* || exit 1 + cd pango-$VERSION + # Fix for x86_64 (does not hurt the other archs but note that we will start # using /etc/pango/$host instead of /etc/pango/ now): zcat $CWD/pango.etc.host.location.diff.gz | patch -p1 --verbose || exit 1 diff --git a/source/l/parted/parted.SlackBuild b/source/l/parted/parted.SlackBuild index e4a9e5926..27e02b557 100755 --- a/source/l/parted/parted.SlackBuild +++ b/source/l/parted/parted.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,16 +22,24 @@ PKGNAM=parted -VERSION=${VERSION:-1.8.8} -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} + NUMJOBS=${NUMJOBS:-" -j7 "} -BUILD=${BUILD:-3} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-${PKGNAM} -rm -rf $PKG -mkdir -p $TMP $PKG if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-march=i486 -mtune=i686 -fgnu89-inline" @@ -42,14 +50,19 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC -fgnu89-inline" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi +rm -rf $PKG +mkdir -p $TMP $PKG cd $TMP rm -rf ${PKGNAM}-${VERSION} -tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1 +tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z || exit 1 cd ${PKGNAM}-$VERSION -zcat $CWD/parted.configure.diff.gz | patch -p0 --verbose --backup --suffix=.orig || exit 1 +zcat $CWD/parted.configure.diff.gz | patch -p1 || exit 1 # Make sure ownerships and permissions are sane: chown -R root:root . @@ -76,8 +89,10 @@ make install DESTDIR=$PKG # Strip binaries: ( cd $PKG - find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | \ + xargs strip --strip-unneeded 2> /dev/null + find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | \ + xargs strip --strip-unneeded 2> /dev/null ) # Compress and link manpages, if any: @@ -110,6 +125,14 @@ cp -a \ doc/{API,FAT} doc/USER.jp \ $PKG/usr/doc/parted-$VERSION +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/l/parted/parted.SlackBuild.static b/source/l/parted/parted.SlackBuild.static index 4c89bbb04..feb3b3611 100755 --- a/source/l/parted/parted.SlackBuild.static +++ b/source/l/parted/parted.SlackBuild.static @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -20,17 +20,26 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + PKGNAM=parted -VERSION=${VERSION:-1.8.8} -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:" -j7 "} -BUILD=${BUILD:-2} +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} + +NUMJOBS=${NUMJOBS:-" -j7 "} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-${PKGNAM} -rm -rf $PKG -mkdir -p $TMP $PKG if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-march=i486 -mtune=i686 -fgnu89-inline" @@ -41,14 +50,19 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC -fgnu89-inline" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi +rm -rf $PKG +mkdir -p $TMP $PKG cd $TMP rm -rf ${PKGNAM}-${VERSION} -tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1 +tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z || exit 1 cd ${PKGNAM}-$VERSION -zcat $CWD/parted.configure.diff.gz | patch -p0 --verbose --backup --suffix=.orig || exit 1 +zcat $CWD/parted.configure.diff.gz | patch -p1 || exit 1 # Make sure ownerships and permissions are sane: chown -R root:root . @@ -66,17 +80,19 @@ CFLAGS="$SLKCFLAGS" \ --infodir=/usr/info \ --enable-shared=no \ --enable-static=yes \ - --with-readline \ --enable-device-mapper=yes \ + --with-readline \ --build=$ARCH-slackware-linux -CFLAGS="$SLKCFLAGS" make $NUMJOBS || make || exit 1 +make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG # Strip binaries: ( cd $PKG - find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | \ + xargs strip --strip-unneeded 2> /dev/null + find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | \ + xargs strip --strip-unneeded 2> /dev/null ) # Compress and link manpages, if any: @@ -109,10 +125,18 @@ cp -a \ doc/{API,FAT} doc/USER.jp \ $PKG/usr/doc/parted-$VERSION +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc # Build the package: cd $PKG -/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.tgz +/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz diff --git a/source/l/parted/parted.configure.diff b/source/l/parted/parted.configure.diff index 3d139f077..649a4b3af 100644 --- a/source/l/parted/parted.configure.diff +++ b/source/l/parted/parted.configure.diff @@ -1,11 +1,12 @@ ---- configure.old 2007-03-20 14:46:50.000000000 -0300 -+++ configure 2007-04-22 19:03:04.000000000 -0300 -@@ -12315,7 +12315,7 @@ +diff -Nur parted-2.1.orig/configure parted-2.1/configure +--- parted-2.1.orig/configure 2009-12-20 05:51:57.000000000 -0600 ++++ parted-2.1/configure 2009-12-22 21:51:44.828799616 -0600 +@@ -13217,7 +13217,7 @@ # native cc issues annoying warnings and then ignores it, # which would cause us to incorrectly conclude that it worked. for gl_flags in \ -- '-Wl,--as-needed' \ -+ '-Wl,--no-as-needed' \ - '-Wl,-z,ignore' \ - '-z ignore' +- '-Wl,--as-needed' \ ++ '-Wl,--no-as-needed' \ + '-Wl,-z,ignore' \ + '-z ignore' do diff --git a/source/l/pcre/pcre.SlackBuild b/source/l/pcre/pcre.SlackBuild index dd0723192..0b5893504 100755 --- a/source/l/pcre/pcre.SlackBuild +++ b/source/l/pcre/pcre.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,10 +21,20 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=7.7 -ARCH=${ARCH:-x86_64} +PKGNAM=pcre +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.bz2 | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + NUMJOBS=${NUMJOBS:-" -j7 "} if [ "$ARCH" = "i486" ]; then @@ -36,6 +46,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -51,6 +64,7 @@ tar xvf $CWD/pcre-$VERSION.tar.bz2 || exit 1 cd pcre-$VERSION chown -R root:root . + find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ -exec chmod 755 {} \; -o \ @@ -91,17 +105,24 @@ if [ -d $PKG/usr/man ]; then ) fi -mkdir -p $PKG/usr/doc/pcre-$VERSION -cp -a \ - AUTHORS COPYING INSTALL LICENCE NEWS NON-UNIX-USE README \ - $PKG/usr/doc/pcre-$VERSION -cd doc -cp -a Tech.Notes html $PKG/usr/doc/pcre-$VERSION -chown -R root:root $PKG/usr/doc/pcre-$VERSION # Eliminate redundant docs: rm -rf $PKG/usr/share/doc rmdir $PKG/usr/share +mkdir -p $PKG/usr/doc/pcre-$VERSION +cp -a \ + AUTHORS COPYING* INSTALL HACKING LICENCE NEWS NON-UNIX-USE README* \ + $PKG/usr/doc/pcre-$VERSION +( cd doc ; cp -a Tech.Notes html $PKG/usr/doc/pcre-$VERSION ) + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/l/phonon/phonon.SlackBuild b/source/l/phonon/phonon.SlackBuild index 9afb84002..74e4518c7 100755 --- a/source/l/phonon/phonon.SlackBuild +++ b/source/l/phonon/phonon.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh # Copyright 2008 Robby Workman, Northport, Alabama, USA -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,12 +22,21 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=4.3.1 -ARCH=${ARCH:-x86_64} +VERSION=4.4.1 +SRCVER=4.4.1 BUILD=${BUILD:-1} - NUMJOBS=${NUMJOBS:--j6} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-phonon @@ -41,13 +50,20 @@ elif [ "$ARCH" = "i686" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG mkdir -p $TMP $PKG cd $TMP +rm -r phonon-$SRCVER tar xvf $CWD/phonon-$VERSION.tar.bz2 || exit 1 -cd phonon-$VERSION || exit 1 +cd phonon-$SRCVER || exit 1 + +#zcat $CWD/phonon.gstreamer.qt-4.5.1.diff.gz | patch -p1 || exit 1 + chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -55,16 +71,21 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; -cmake \ - -DCMAKE_BUILD_TYPE=Release \ - -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ - -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ - -DCMAKE_INSTALL_PREFIX=/usr \ - -DMAN_INSTALL_DIR=/usr/man \ - -DLIB_SUFFIX=${LIBDIRSUFFIX} \ - . +mkdir build +cd build + cmake \ + -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ + -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ + -DCMAKE_INSTALL_PREFIX=/usr \ + -DMAN_INSTALL_DIR=/usr/man \ + -DLIB_SUFFIX=${LIBDIRSUFFIX} \ + .. make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG || exit 1 +cd - + +# PyQT won't find the header files otherwise: +sed -i -e 's#{includedir}$#& -I\${includedir}/phonon#' $PKG/usr/lib${LIBDIRSUFFIX}/pkgconfig/phonon.pc # Compress and link manpages, if any: if [ -d $PKG/usr/man ]; then diff --git a/source/l/phonon/phonon.gstreamer.qt-4.5.1.diff b/source/l/phonon/phonon.gstreamer.qt-4.5.1.diff new file mode 100644 index 000000000..d55d2f88d --- /dev/null +++ b/source/l/phonon/phonon.gstreamer.qt-4.5.1.diff @@ -0,0 +1,431 @@ +diff -u -r --new-file phonon-4.3.1.orig/gstreamer/CMakeLists.txt phonon-4.3.1/gstreamer/CMakeLists.txt +--- phonon-4.3.1.orig/gstreamer/CMakeLists.txt 2009-02-27 04:15:42.000000000 -0600 ++++ phonon-4.3.1/gstreamer/CMakeLists.txt 2009-10-19 13:07:39.000000000 -0500 +@@ -1,4 +1,4 @@ +-# Copyright (C) 2009 Nokia Corporation. All rights reserved. ++# Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies). + # Copyright (C) 2008 Matthias Kretz <kretz@kde.org> + # + # This library is free software: you can redistribute it and/or modify +@@ -19,7 +19,6 @@ + if (BUILD_PHONON_GSTREAMER) + include_directories(${GSTREAMER_INCLUDE_DIR} ${GLIB2_INCLUDE_DIR} + ${LIBXML2_INCLUDE_DIR}) +- add_definitions(-DPHONON_BACKEND_VERSION_4_2) + + set(phonon_gstreamer_SRCS + audiooutput.cpp +@@ -46,17 +45,17 @@ + ) + + find_package(Alsa) +- macro_ensure_version("0.10.22" ${GSTREAMER_VERSION} GSTREAMER_HAS_NONBLOCKING_ALSASINK) +- if(ALSA_FOUND AND NOT GSTREAMER_HAS_NONBLOCKING_ALSASINK) ++ if(ALSA_FOUND) + add_definitions(-DUSE_ALSASINK2) + include_directories(${ALSA_INCLUDES}) + set(phonon_gstreamer_SRCS + ${phonon_gstreamer_SRCS} + alsasink2.c + ) +- endif(ALSA_FOUND AND NOT GSTREAMER_HAS_NONBLOCKING_ALSASINK) ++ endif(ALSA_FOUND) + +- automoc4_add_library(phonon_gstreamer SHARED ${phonon_gstreamer_SRCS}) ++ automoc4(phonon_gstreamer phonon_gstreamer_SRCS) ++ add_library(phonon_gstreamer SHARED ${phonon_gstreamer_SRCS}) + set_target_properties(phonon_gstreamer PROPERTIES PREFIX "") + target_link_libraries(phonon_gstreamer + ${QT_QTOPENGL_LIBRARY} +diff -u -r --new-file phonon-4.3.1.orig/gstreamer/ConfigureChecks.cmake phonon-4.3.1/gstreamer/ConfigureChecks.cmake +--- phonon-4.3.1.orig/gstreamer/ConfigureChecks.cmake 2009-02-27 04:15:42.000000000 -0600 ++++ phonon-4.3.1/gstreamer/ConfigureChecks.cmake 2009-10-19 13:07:39.000000000 -0500 +@@ -1,4 +1,4 @@ +-# Copyright (C) 2009 Nokia Corporation. All rights reserved. ++# Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies). + # + # This library is free software: you can redistribute it and/or modify + # it under the terms of the GNU Lesser General Public License as published by +@@ -17,7 +17,6 @@ + + macro_optional_find_package(GStreamerPlugins) + macro_log_feature(GSTREAMER_PLUGIN_VIDEO_LIBRARIES "GStreamer video plugin" "The gstreamer video plugin (part of gstreamer-plugins-base 0.10) is required for the multimedia gstreamer backend" "http://gstreamer.freedesktop.org/modules/" FALSE "0.10") +-macro_log_feature(GSTREAMER_PLUGIN_AUDIO_LIBRARIES "GStreamer audio plugin" "The gstreamer audio plugin (part of gstreamer-plugins-base 0.10) is required for the multimedia gstreamer backend" "http://gstreamer.freedesktop.org/modules/" FALSE "0.10") + + macro_optional_find_package(GLIB2) + macro_log_feature(GLIB2_FOUND "GLib2" "GLib 2 is required to compile the gstreamer backend for Phonon" "http://www.gtk.org/download/" FALSE) +@@ -31,8 +30,8 @@ + macro_optional_find_package(OpenGL) + macro_log_feature(OPENGL_FOUND "OpenGL" "OpenGL support is required to compile the gstreamer backend for Phonon" "" FALSE) + +-if (GSTREAMER_FOUND AND GSTREAMER_PLUGIN_VIDEO_LIBRARIES AND GSTREAMER_PLUGIN_AUDIO_LIBRARIES AND GLIB2_FOUND AND GOBJECT_FOUND AND LIBXML2_FOUND AND OPENGL_FOUND) ++if (GSTREAMER_FOUND AND GSTREAMER_PLUGIN_VIDEO_LIBRARIES AND GLIB2_FOUND AND GOBJECT_FOUND AND LIBXML2_FOUND AND OPENGL_FOUND) + set(BUILD_PHONON_GSTREAMER TRUE) +-else (GSTREAMER_FOUND AND GSTREAMER_PLUGIN_VIDEO_LIBRARIES AND GSTREAMER_PLUGIN_AUDIO_LIBRARIES AND GLIB2_FOUND AND GOBJECT_FOUND AND LIBXML2_FOUND AND OPENGL_FOUND) ++else (GSTREAMER_FOUND AND GSTREAMER_PLUGIN_VIDEO_LIBRARIES AND GLIB2_FOUND AND GOBJECT_FOUND AND LIBXML2_FOUND AND OPENGL_FOUND) + set(BUILD_PHONON_GSTREAMER FALSE) +-endif (GSTREAMER_FOUND AND GSTREAMER_PLUGIN_VIDEO_LIBRARIES AND GSTREAMER_PLUGIN_AUDIO_LIBRARIES AND GLIB2_FOUND AND GOBJECT_FOUND AND LIBXML2_FOUND AND OPENGL_FOUND) ++endif (GSTREAMER_FOUND AND GSTREAMER_PLUGIN_VIDEO_LIBRARIES AND GLIB2_FOUND AND GOBJECT_FOUND AND LIBXML2_FOUND AND OPENGL_FOUND) +diff -u -r --new-file phonon-4.3.1.orig/gstreamer/audiooutput.cpp phonon-4.3.1/gstreamer/audiooutput.cpp +--- phonon-4.3.1.orig/gstreamer/audiooutput.cpp 2009-02-27 04:15:42.000000000 -0600 ++++ phonon-4.3.1/gstreamer/audiooutput.cpp 2009-10-19 13:07:39.000000000 -0500 +@@ -42,6 +42,7 @@ + static int count = 0; + m_name = "AudioOutput" + QString::number(count++); + if (m_backend->isValid()) { ++ g_set_application_name(qApp->applicationName().toUtf8()); + m_audioBin = gst_bin_new (NULL); + gst_object_ref (GST_OBJECT (m_audioBin)); + gst_object_sink (GST_OBJECT (m_audioBin)); +diff -u -r --new-file phonon-4.3.1.orig/gstreamer/mediaobject.cpp phonon-4.3.1/gstreamer/mediaobject.cpp +--- phonon-4.3.1.orig/gstreamer/mediaobject.cpp 2009-02-27 04:15:42.000000000 -0600 ++++ phonon-4.3.1/gstreamer/mediaobject.cpp 2009-10-19 13:19:20.000000000 -0500 +@@ -14,7 +14,6 @@ + You should have received a copy of the GNU Lesser General Public License + along with this library. If not, see <http://www.gnu.org/licenses/>. + */ +- + #include <cmath> + #include <gst/interfaces/propertyprobe.h> + #include "common.h" +@@ -24,7 +23,6 @@ + #include "backend.h" + #include "streamreader.h" + #include "phononsrc.h" +- + #include <QtCore> + #include <QtCore/QTimer> + #include <QtCore/QVector> +@@ -78,6 +76,9 @@ + , m_videoGraph(0) + , m_previousTickTime(-1) + , m_resetNeeded(false) ++ , m_autoplayTitles(true) ++ , m_availableTitles(0) ++ , m_currentTitle(1) + { + qRegisterMetaType<GstCaps*>("GstCaps*"); + qRegisterMetaType<State>("State"); +@@ -141,9 +142,9 @@ + if (m_resumeState) + return; + +- if (m_state == Phonon::PlayingState || m_state == Phonon::PausedState) { ++ if (m_pendingState == Phonon::PlayingState || m_pendingState == Phonon::PausedState) { + m_resumeState = true; +- m_oldState = m_state; ++ m_oldState = m_pendingState; + m_oldPos = getPipelinePos(); + } + } +@@ -347,11 +348,8 @@ + * + * returns true if successful + */ +-bool MediaObject::createPipefromURL(const QString &encodedUrl) ++bool MediaObject::createPipefromURL(const QUrl &url) + { +- // Convert back to URL +- QUrl url(encodedUrl, QUrl::StrictMode); +- + // Remove any existing data source + if (m_datasource) { + gst_bin_remove(GST_BIN(m_pipeline), m_datasource); +@@ -361,7 +359,7 @@ + + // Verify that the uri can be parsed + if (!url.isValid()) { +- m_backend->logMessage(QString("%1 is not a valid URI").arg(encodedUrl)); ++ m_backend->logMessage(QString("%1 is not a valid URI").arg(url.toString())); + return false; + } + +@@ -875,8 +873,7 @@ + + switch (source.type()) { + case MediaSource::Url: { +- QString urlString = source.url().toEncoded(); +- if (createPipefromURL(urlString)) ++ if (createPipefromURL(source.url())) + m_loading = true; + else + setError(tr("Could not open media source.")); +@@ -884,8 +881,7 @@ + break; + + case MediaSource::LocalFile: { +- QString urlString = QUrl::fromLocalFile(source.fileName()).toString(); +- if (createPipefromURL(urlString)) ++ if (createPipefromURL(QUrl::fromLocalFile(source.fileName()))) + m_loading = true; + else + setError(tr("Could not open media source.")); +@@ -907,8 +903,13 @@ + break; + + case MediaSource::Disc: // CD tracks can be specified by setting the url in the following way uri=cdda:4 +- m_backend->logMessage("Source type Disc not currently supported", Backend::Warning, this); +- setError(tr("Could not open media source."), Phonon::NormalError); ++ { ++ QUrl cdurl(QLatin1String("cdda://")); ++ if (createPipefromURL(cdurl)) ++ m_loading = true; ++ else ++ setError(tr("Could not open media source.")); ++ } + break; + + default: +@@ -959,6 +960,19 @@ + m_hasVideo = m_videoStreamFound; + emit hasVideoChanged(m_hasVideo); + } ++ ++ m_availableTitles = 1; ++ gint64 titleCount; ++ GstFormat format = gst_format_get_by_nick("track"); ++ if (gst_element_query_duration (m_pipeline, &format, &titleCount)) { ++ int oldAvailableTitles = m_availableTitles; ++ m_availableTitles = (int)titleCount; ++ if (m_availableTitles != oldAvailableTitles) { ++ emit availableTitlesChanged(m_availableTitles); ++ m_backend->logMessage(QString("Available titles changed: %0").arg(m_availableTitles), Backend::Info, this); ++ } ++ } ++ + } + + void MediaObject::setPrefinishMark(qint32 newPrefinishMark) +@@ -1356,6 +1370,13 @@ + if (!m_seekable) + m_atEndOfStream = true; + ++ if (m_autoplayTitles && ++ m_availableTitles > 1 && ++ m_currentTitle < m_availableTitles) { ++ _iface_setCurrentTitle(m_currentTitle + 1); ++ return; ++ } ++ + if (m_nextSource.type() != MediaSource::Invalid + && m_nextSource.type() != MediaSource::Empty) { // We only emit finish when the queue is actually empty + QTimer::singleShot (qMax(0, transitionTime()), this, SLOT(beginPlay())); +@@ -1384,6 +1405,72 @@ + notify(&event); + } + ++#ifndef QT_NO_PHONON_MEDIACONTROLLER ++//interface management ++bool MediaObject::hasInterface(Interface iface) const ++{ ++ return iface == AddonInterface::TitleInterface; ++} ++ ++QVariant MediaObject::interfaceCall(Interface iface, int command, const QList<QVariant> ¶ms) ++{ ++ if (hasInterface(iface)) { ++ ++ switch (iface) ++ { ++ case TitleInterface: ++ switch (command) ++ { ++ case availableTitles: ++ return _iface_availableTitles(); ++ case title: ++ return _iface_currentTitle(); ++ case setTitle: ++ _iface_setCurrentTitle(params.first().toInt()); ++ break; ++ case autoplayTitles: ++ return m_autoplayTitles; ++ case setAutoplayTitles: ++ m_autoplayTitles = params.first().toBool(); ++ break; ++ } ++ break; ++ default: ++ break; ++ } ++ } ++ return QVariant(); ++} ++#endif ++ ++int MediaObject::_iface_availableTitles() const ++{ ++ return m_availableTitles; ++} ++ ++int MediaObject::_iface_currentTitle() const ++{ ++ return m_currentTitle; ++} ++ ++void MediaObject::_iface_setCurrentTitle(int title) ++{ ++ GstFormat trackFormat = gst_format_get_by_nick("track"); ++ m_backend->logMessage(QString("setCurrentTitle %0").arg(title), Backend::Info, this); ++ if ((title == m_currentTitle) || (title < 1) || (title > m_availableTitles)) ++ return; ++ ++ m_currentTitle = title; ++ ++ //let's seek to the beginning of the song ++ if (gst_element_seek_simple(m_pipeline, trackFormat, GST_SEEK_FLAG_FLUSH, m_currentTitle - 1)) { ++ updateTotalTime(); ++ m_atEndOfStream = false; ++ emit titleChanged(title); ++ emit totalTimeChanged(totalTime()); ++ } ++} ++ + } // ns Gstreamer + } // ns Phonon + +diff -u -r --new-file phonon-4.3.1.orig/gstreamer/mediaobject.h phonon-4.3.1/gstreamer/mediaobject.h +--- phonon-4.3.1.orig/gstreamer/mediaobject.h 2009-02-27 04:15:42.000000000 -0600 ++++ phonon-4.3.1/gstreamer/mediaobject.h 2009-10-19 13:07:39.000000000 -0500 +@@ -21,7 +21,6 @@ + #include "backend.h" + #include "common.h" + #include "medianode.h" +- + #include <phonon/mediaobjectinterface.h> + #include <phonon/addoninterface.h> + +@@ -32,7 +31,6 @@ + #include <QtCore/QDate> + #include <QtCore/QEvent> + #include <QtCore/QUrl> +- + #include <gst/gst.h> + + QT_BEGIN_NAMESPACE +@@ -50,11 +48,20 @@ + class VideoPath; + class AudioOutput; + +-class MediaObject : public QObject, public MediaObjectInterface, public AddonInterface, public MediaNode ++class MediaObject : public QObject, public MediaObjectInterface ++#ifndef QT_NO_PHONON_MEDIACONTROLLER ++ , public AddonInterface ++#endif ++ , public MediaNode + { + friend class Stream; + Q_OBJECT +- Q_INTERFACES(Phonon::MediaObjectInterface Phonon::AddonInterface Phonon::Gstreamer::MediaNode) ++ Q_INTERFACES(Phonon::MediaObjectInterface ++#ifndef QT_NO_PHONON_MEDIACONTROLLER ++ Phonon::AddonInterface ++#endif ++ Phonon::Gstreamer::MediaNode ++ ) + + public: + +@@ -93,16 +100,10 @@ + MediaSource source() const; + + // No additional interfaces currently supported +- bool hasInterface(Interface) const +- { +- return false; +- } +- +- QVariant interfaceCall(Interface, int, const QList<QVariant> &) +- { +- return QVariant(); +- } +- ++#ifndef QT_NO_PHONON_MEDIACONTROLLER ++ bool hasInterface(Interface) const; ++ QVariant interfaceCall(Interface, int, const QList<QVariant> &); ++#endif + bool isLoading() + { + return m_loading; +@@ -176,6 +177,19 @@ + QMultiMap<QString, QString> metaData(); + void setMetaData(QMultiMap<QString, QString> newData); + ++ // AddonInterface: ++ void titleChanged(int); ++ void availableTitlesChanged(int); ++ ++ // Not implemented ++ void chapterChanged(int); ++ void availableChaptersChanged(int); ++ void angleChanged(int); ++ void availableAnglesChanged(int); ++ ++ void availableSubtitlesChanged(); ++ void availableAudioChannelsChanged(); ++ + protected: + void beginLoad(); + void loadingComplete(); +@@ -185,7 +199,7 @@ + /* + * @param encodedUrl percent-encoded QString for source compat reasons. Should change to QUrl + */ +- bool createPipefromURL(const QString &encodedUrl); ++ bool createPipefromURL(const QUrl &url); + bool createPipefromStream(const MediaSource &); + + private Q_SLOTS: +@@ -219,6 +233,10 @@ + void updateSeekable(); + qint64 getPipelinePos() const; + ++ int _iface_availableTitles() const; ++ int _iface_currentTitle() const; ++ void _iface_setCurrentTitle(int title); ++ + bool m_resumeState; + State m_oldState; + quint64 m_oldPos; +@@ -264,6 +282,9 @@ + bool m_resetNeeded; + QStringList m_missingCodecs; + QMultiMap<QString, QString> m_metaData; ++ bool m_autoplayTitles; ++ int m_availableTitles; ++ int m_currentTitle; + }; + } + } //namespace Phonon::Gstreamer +diff -u -r --new-file phonon-4.3.1.orig/gstreamer/qwidgetvideosink.h phonon-4.3.1/gstreamer/qwidgetvideosink.h +--- phonon-4.3.1.orig/gstreamer/qwidgetvideosink.h 2009-02-27 04:15:42.000000000 -0600 ++++ phonon-4.3.1/gstreamer/qwidgetvideosink.h 2009-10-19 13:07:39.000000000 -0500 +@@ -19,7 +19,6 @@ + #define Phonon_GSTREAMER_VIDEOSINK_H + + #include "common.h" +-#include "qwidgetvideosink.h" + + #include <QtCore/QByteArray> + #include <QtCore/QEvent> +diff -u -r --new-file phonon-4.3.1.orig/gstreamer/videowidget.h phonon-4.3.1/gstreamer/videowidget.h +--- phonon-4.3.1.orig/gstreamer/videowidget.h 2009-02-27 04:15:42.000000000 -0600 ++++ phonon-4.3.1/gstreamer/videowidget.h 2009-10-19 13:07:39.000000000 -0500 +@@ -25,7 +25,6 @@ + #include "common.h" + #include "medianode.h" + #include "abstractrenderer.h" +-#include "videowidget.h" + + #include <gst/gst.h> + +diff -u -r --new-file phonon-4.3.1.orig/gstreamer/x11renderer.cpp phonon-4.3.1/gstreamer/x11renderer.cpp +--- phonon-4.3.1.orig/gstreamer/x11renderer.cpp 2009-02-27 04:15:42.000000000 -0600 ++++ phonon-4.3.1/gstreamer/x11renderer.cpp 2009-10-19 13:07:39.000000000 -0500 +@@ -138,7 +138,6 @@ + void X11Renderer::movieSizeChanged(const QSize &movieSize) + { + Q_UNUSED(movieSize); +- + if (m_renderWidget) { + m_renderWidget->setGeometry(m_videoWidget->calculateDrawFrameRect()); + } diff --git a/source/l/phonon/slack-desc b/source/l/phonon/slack-desc index 9602f73b7..86e93b3e8 100644 --- a/source/l/phonon/slack-desc +++ b/source/l/phonon/slack-desc @@ -8,9 +8,9 @@ |-----handy-ruler------------------------------------------------------| phonon: phonon (multimedia framework for KDE4) phonon: -phonon: Phonon is the multimedia framework for KDE4. -phonon: -phonon: +phonon: Phonon is the multimedia framework for KDE4. This package contains +phonon: the Phonon library, the KDE Phonon xine and gstreamer backends, and +phonon: support files for using Phonon with KDE. phonon: phonon: phonon: diff --git a/source/l/pil/pil.SlackBuild b/source/l/pil/pil.SlackBuild index c9c11c2da..76e3b959b 100755 --- a/source/l/pil/pil.SlackBuild +++ b/source/l/pil/pil.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -20,10 +20,22 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=1.1.6 -ARCH=${ARCH:-x86_64} + +PKGNAM=pil +ARCNAM=Imaging +VERSION=${VERSION:-$(echo $ARCNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "${ARCH}" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" @@ -40,15 +52,15 @@ fi CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-pil +PKG=$TMP/package-$PKGNAM rm -rf $PKG mkdir -p $TMP $PKG cd $TMP -rm -rf Imaging-$VERSION -tar xvf $CWD/Imaging-$VERSION.tar.*z* || exit 1 -cd Imaging-$VERSION +rm -rf $ARCNAM-$VERSION +tar xvf $CWD/$ARCNAM-$VERSION.tar.*z* || exit 1 +cd $ARCNAM-$VERSION chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -67,15 +79,23 @@ python setup.py install --root=$PKG || exit 1 find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -mkdir -p $PKG/usr/doc/pil-$VERSION +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION cp -a \ - BUILDME CHANGES CONTENTS MANIFEST README \ - $PKG/usr/doc/pil-$VERSION -cp -a Sane/README $PKG/usr/doc/pil-$VERSION/README.Sane + BUILDME CONTENTS MANIFEST README \ + $PKG/usr/doc/$PKGNAM-$VERSION +cp -a Sane/README $PKG/usr/doc/$PKGNAM-$VERSION/README.Sane + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r CHANGES ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat CHANGES | head -n 1000 > $DOCSDIR/CHANGES + touch -r CHANGES $DOCSDIR/CHANGES +fi mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -/sbin/makepkg -l y -c n $TMP/pil-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/l/pilot-link/pilot-link.SlackBuild b/source/l/pilot-link/pilot-link.SlackBuild index ca32428cc..c6dac9fa3 100755 --- a/source/l/pilot-link/pilot-link.SlackBuild +++ b/source/l/pilot-link/pilot-link.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -20,9 +20,18 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=${VERSION:-0.12.3} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-9} +VERSION=${VERSION:-0.12.5} +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi NUMJOBS=${NUMJOBS:-" -j7 "} @@ -41,6 +50,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi cd $TMP @@ -48,6 +60,8 @@ rm -rf pilot-link-$VERSION tar xvf $CWD/pilot-link-$VERSION.tar.bz2 || exit 1 cd pilot-link-$VERSION +zcat $CWD/pilot-link.png14.diff.gz | patch -p1 --verbose || exit 1 + chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -102,9 +116,17 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" \ mkdir -p $PKG/usr/doc/pilot-link-$VERSION cp -a \ - AUTHORS COPYING* INSTALL NEWS README \ + AUTHORS COPYING* INSTALL NEWS README* \ $PKG/usr/doc/pilot-link-$VERSION +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + # Install man pages: mkdir -p $PKG/usr/man/man{1,7} cp -a doc/man/*.1 $PKG/usr/man/man1 diff --git a/source/l/pilot-link/pilot-link.png14.diff b/source/l/pilot-link/pilot-link.png14.diff new file mode 100644 index 000000000..bc1cba25d --- /dev/null +++ b/source/l/pilot-link/pilot-link.png14.diff @@ -0,0 +1,96 @@ +--- ./src/pilot-read-veo.c.orig 2007-02-04 17:06:03.000000000 -0600 ++++ ./src/pilot-read-veo.c 2010-02-19 12:52:30.000000000 -0600 +@@ -41,10 +41,6 @@ + + #ifdef HAVE_PNG + # include "png.h" +-# if (PNG_LIBPNG_VER < 10201) +-# define png_voidp_NULL (png_voidp)NULL +-# define png_error_ptr_NULL (png_error_ptr)NULL +-# endif + #endif + + #define pi_mktag(c1,c2,c3,c4) (((c1)<<24)|((c2)<<16)|((c3)<<8)|(c4)) +@@ -856,8 +852,8 @@ + png_infop info_ptr; + + png_ptr = png_create_write_struct +- (PNG_LIBPNG_VER_STRING, png_voidp_NULL, +- png_error_ptr_NULL, png_error_ptr_NULL); ++ (PNG_LIBPNG_VER_STRING, NULL, ++ NULL, NULL); + + if (!png_ptr) + return; +--- ./src/pilot-read-notepad.c.orig 2007-02-04 17:06:02.000000000 -0600 ++++ ./src/pilot-read-notepad.c 2010-02-19 12:53:03.000000000 -0600 +@@ -39,10 +39,6 @@ + + #ifdef HAVE_PNG + #include "png.h" +-#if (PNG_LIBPNG_VER < 10201) +- #define png_voidp_NULL (png_voidp)NULL +- #define png_error_ptr_NULL (png_error_ptr)NULL +-#endif + #endif + + const char *progname; +@@ -166,8 +162,8 @@ + width = n->body.width + 8; + + png_ptr = png_create_write_struct +- ( PNG_LIBPNG_VER_STRING, png_voidp_NULL, +- png_error_ptr_NULL, png_error_ptr_NULL); ++ ( PNG_LIBPNG_VER_STRING, NULL, ++ NULL, NULL); + + if(!png_ptr) + return; +--- ./src/pilot-read-screenshot.c.orig 2006-11-02 08:54:31.000000000 -0600 ++++ ./src/pilot-read-screenshot.c 2010-02-19 12:50:44.000000000 -0600 +@@ -40,10 +40,6 @@ + + #ifdef HAVE_PNG + # include "png.h" +-# if (PNG_LIBPNG_VER < 10201) +-# define png_voidp_NULL (png_voidp)NULL +-# define png_error_ptr_NULL (png_error_ptr)NULL +-# endif + #endif + + #define pi_mktag(c1,c2,c3,c4) (((c1)<<24)|((c2)<<16)|((c3)<<8)|(c4)) +@@ -87,8 +83,8 @@ + gray_buf = malloc( state->w ); + + png_ptr = png_create_write_struct +- (PNG_LIBPNG_VER_STRING, png_voidp_NULL, +- png_error_ptr_NULL, png_error_ptr_NULL); ++ (PNG_LIBPNG_VER_STRING, NULL, ++ NULL, NULL); + + if (!png_ptr) + return; +--- ./src/pilot-read-palmpix.c.orig 2007-02-04 17:06:03.000000000 -0600 ++++ ./src/pilot-read-palmpix.c 2010-02-19 12:51:10.000000000 -0600 +@@ -42,10 +42,6 @@ + + #ifdef HAVE_PNG + #include "png.h" +-#if (PNG_LIBPNG_VER < 10201) +- #define png_voidp_NULL (png_voidp)NULL +- #define png_error_ptr_NULL (png_error_ptr)NULL +-#endif + #endif + + const char *progname; +@@ -223,8 +219,8 @@ + png_infop info_ptr; + + png_ptr = png_create_write_struct +- ( PNG_LIBPNG_VER_STRING, png_voidp_NULL, +- png_error_ptr_NULL, png_error_ptr_NULL); ++ ( PNG_LIBPNG_VER_STRING, NULL, ++ NULL, NULL); + + if(!png_ptr) + return; diff --git a/source/l/polkit-gnome/pkga.desktop-NotShowInKDE.diff b/source/l/polkit-gnome/pkga.desktop-NotShowInKDE.diff new file mode 100644 index 000000000..997d1512e --- /dev/null +++ b/source/l/polkit-gnome/pkga.desktop-NotShowInKDE.diff @@ -0,0 +1,9 @@ +diff -Nur polkit-gnome-0.95.orig//src/polkit-gnome-authentication-agent-1.desktop.in.in polkit-gnome-0.95/src/polkit-gnome-authentication-agent-1.desktop.in.in +--- polkit-gnome-0.95.orig//src/polkit-gnome-authentication-agent-1.desktop.in.in 2009-07-20 18:28:31.000000000 -0500 ++++ polkit-gnome-0.95/src/polkit-gnome-authentication-agent-1.desktop.in.in 2010-05-03 01:03:47.021291164 -0500 +@@ -5,4 +5,4 @@ + Terminal=false + Type=Application + Categories= +-OnlyShowIn=GNOME; ++NotShowIn=KDE; diff --git a/source/l/polkit-gnome/polkit-gnome.SlackBuild b/source/l/polkit-gnome/polkit-gnome.SlackBuild new file mode 100755 index 000000000..1790e66b4 --- /dev/null +++ b/source/l/polkit-gnome/polkit-gnome.SlackBuild @@ -0,0 +1,103 @@ +#!/bin/sh + +# Slackware build script for polkit-gnome + +# Copyright 2009, 2010 Robby Workman, Northport, Alabama, USA +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +PKGNAM=polkit-gnome +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} + +NUMJOBS=${NUMJOBS:--j6} + +# Automatically determine architecture for build & packaging: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-$PKGNAM + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "i686" ]; then + SLKCFLAGS="-O2 -march=i686 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + +rm -rf $PKG +mkdir -p $TMP $PKG +cd $TMP +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1 +cd $PKGNAM-$VERSION +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +# Let's reverse the logic from OnlyShowIn=GNOME to NotShowIn=KDE so that this +# authentication agent can be used in Xfce (and third-party gnome as needed) +zcat $CWD/pkga.desktop-NotShowInKDE.diff.gz | patch -p1 || exit 1 + +CFLAGS="$SLKCFLAGS" \ +CXXFLAGS="$SLKCFLAGS" \ +./configure \ + --prefix=/usr \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --sysconfdir=/etc \ + --localstatedir=/var \ + --docdir=/usr/doc/$PKGNAM-$VERSION \ + --mandir=/usr/man \ + --enable-gtk-doc \ + --disable-static \ + --disable-introspection \ + --build=$ARCH-slackware-linux + +make $NUMJOBS || make || exit 1 +make install DESTDIR=$PKG + +find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ + | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION +cp -a AUTHORS COPYING HACKING NEWS README TODO \ + $PKG/usr/doc/$PKGNAM-$VERSION + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc + +cd $PKG +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/l/polkit-gnome/slack-desc b/source/l/polkit-gnome/slack-desc new file mode 100644 index 000000000..a9d545bee --- /dev/null +++ b/source/l/polkit-gnome/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler-----------------------------------------------------| +polkit-gnome: polkit-gnome (GTK+ authentication agent for polkit) +polkit-gnome: +polkit-gnome: polkit-gnome provides a GTK+ based authentication agent for polkit. +polkit-gnome: It can be used by any desktop environment that follows the XDG +polkit-gnome: Base Directory Specification. +polkit-gnome: +polkit-gnome: +polkit-gnome: +polkit-gnome: +polkit-gnome: +polkit-gnome: diff --git a/source/l/polkit/polkit-1-shadow.diff b/source/l/polkit/polkit-1-shadow.diff new file mode 100644 index 000000000..56e24277d --- /dev/null +++ b/source/l/polkit/polkit-1-shadow.diff @@ -0,0 +1,1030 @@ +diff --git a/src/polkitagent/Makefile.am b/src/polkitagent/Makefile.am +index 3f38329..e114d01 100644 +--- a/src/polkitagent/Makefile.am ++++ b/src/polkitagent/Makefile.am +@@ -68,8 +68,15 @@ libpolkit_agent_1_la_LDFLAGS = -export-symbols-regex '(^polkit_.*)' + libexec_PROGRAMS = polkit-agent-helper-1 + + polkit_agent_helper_1_SOURCES = \ +- polkitagenthelper.c \ +- $(NULL) ++ polkitagenthelperprivate.c polkitagenthelperprivate.h ++ ++if POLKIT_AUTHFW_PAM ++polkit_agent_helper_1_SOURCES += polkitagenthelper-pam.c ++endif ++if POLKIT_AUTHFW_SHADOW ++polkit_agent_helper_1_SOURCES += polkitagenthelper-shadow.c ++endif ++polkit_agent_helper_1_SOURCES += $(NULL) + + polkit_agent_helper_1_CFLAGS = \ + -D_POLKIT_COMPILATION \ +diff --git a/src/polkitagent/polkitagenthelper-pam.c b/src/polkitagent/polkitagenthelper-pam.c +new file mode 100644 +index 0000000..4c6c6fb +--- /dev/null ++++ b/src/polkitagent/polkitagenthelper-pam.c +@@ -0,0 +1,264 @@ ++/* ++ * Copyright (C) 2008, 2010 Red Hat, Inc. ++ * ++ * This library is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU Lesser General Public ++ * License as published by the Free Software Foundation; either ++ * version 2 of the License, or (at your option) any later version. ++ * ++ * This library is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * Lesser General Public License for more details. ++ * ++ * You should have received a copy of the GNU Lesser General ++ * Public License along with this library; if not, write to the ++ * Free Software Foundation, Inc., 59 Temple Place, Suite 330, ++ * Boston, MA 02111-1307, USA. ++ * ++ * Author: David Zeuthen <davidz@redhat.com> ++ */ ++ ++#include "config.h" ++#include <stdio.h> ++#include <stdlib.h> ++#include <string.h> ++#include <unistd.h> ++#include <sys/types.h> ++#include <sys/stat.h> ++#include <syslog.h> ++#include <security/pam_appl.h> ++ ++#include <polkit/polkit.h> ++#include "polkitagenthelperprivate.h" ++ ++static int conversation_function (int n, const struct pam_message **msg, struct pam_response **resp, void *data); ++ ++int ++main (int argc, char *argv[]) ++{ ++ int rc; ++ const char *user_to_auth; ++ const char *cookie; ++ struct pam_conv pam_conversation; ++ pam_handle_t *pam_h; ++ const void *authed_user; ++ ++ rc = 0; ++ pam_h = NULL; ++ ++ /* clear the entire environment to avoid attacks using with libraries honoring environment variables */ ++ if (clearenv () != 0) ++ goto error; ++ ++ /* set a minimal environment */ ++ setenv ("PATH", "/usr/sbin:/usr/bin:/sbin:/bin", 1); ++ ++ /* check that we are setuid root */ ++ if (geteuid () != 0) ++ { ++ fprintf (stderr, "polkit-agent-helper-1: needs to be setuid root\n"); ++ goto error; ++ } ++ ++ openlog ("polkit-agent-helper-1", LOG_CONS | LOG_PID, LOG_AUTHPRIV); ++ ++ /* check for correct invocation */ ++ if (argc != 3) ++ { ++ syslog (LOG_NOTICE, "inappropriate use of helper, wrong number of arguments [uid=%d]", getuid ()); ++ fprintf (stderr, "polkit-agent-helper-1: wrong number of arguments. This incident has been logged.\n"); ++ goto error; ++ } ++ ++ user_to_auth = argv[1]; ++ cookie = argv[2]; ++ ++ if (getuid () != 0) ++ { ++ /* check we're running with a non-tty stdin */ ++ if (isatty (STDIN_FILENO) != 0) ++ { ++ syslog (LOG_NOTICE, "inappropriate use of helper, stdin is a tty [uid=%d]", getuid ()); ++ fprintf (stderr, "polkit-agent-helper-1: inappropriate use of helper, stdin is a tty. This incident has been logged.\n"); ++ goto error; ++ } ++ } ++ ++#ifdef PAH_DEBUG ++ fprintf (stderr, "polkit-agent-helper-1: user to auth is '%s'.\n", user_to_auth); ++#endif /* PAH_DEBUG */ ++ ++ pam_conversation.conv = conversation_function; ++ pam_conversation.appdata_ptr = NULL; ++ ++ /* start the pam stack */ ++ rc = pam_start ("polkit-1", ++ user_to_auth, ++ &pam_conversation, ++ &pam_h); ++ if (rc != PAM_SUCCESS) ++ { ++ fprintf (stderr, "polkit-agent-helper-1: pam_start failed: %s\n", pam_strerror (pam_h, rc)); ++ goto error; ++ } ++ ++ /* set the requesting user */ ++ rc = pam_set_item (pam_h, PAM_RUSER, user_to_auth); ++ if (rc != PAM_SUCCESS) ++ { ++ fprintf (stderr, "polkit-agent-helper-1: pam_set_item failed: %s\n", pam_strerror (pam_h, rc)); ++ goto error; ++ } ++ ++ /* is user really user? */ ++ rc = pam_authenticate (pam_h, 0); ++ if (rc != PAM_SUCCESS) ++ { ++ fprintf (stderr, "polkit-agent-helper-1: pam_authenticated failed: %s\n", pam_strerror (pam_h, rc)); ++ goto error; ++ } ++ ++ /* permitted access? */ ++ rc = pam_acct_mgmt (pam_h, 0); ++ if (rc != PAM_SUCCESS) ++ { ++ fprintf (stderr, "polkit-agent-helper-1: pam_acct_mgmt failed: %s\n", pam_strerror (pam_h, rc)); ++ goto error; ++ } ++ ++ /* did we auth the right user? */ ++ rc = pam_get_item (pam_h, PAM_USER, &authed_user); ++ if (rc != PAM_SUCCESS) ++ { ++ fprintf (stderr, "polkit-agent-helper-1: pam_get_item failed: %s\n", pam_strerror (pam_h, rc)); ++ goto error; ++ } ++ ++ if (strcmp (authed_user, user_to_auth) != 0) ++ { ++ fprintf (stderr, "polkit-agent-helper-1: Tried to auth user '%s' but we got auth for user '%s' instead", ++ user_to_auth, (const char *) authed_user); ++ goto error; ++ } ++ ++#ifdef PAH_DEBUG ++ fprintf (stderr, "polkit-agent-helper-1: successfully authenticated user '%s'.\n", user_to_auth); ++#endif /* PAH_DEBUG */ ++ ++ pam_end (pam_h, rc); ++ pam_h = NULL; ++ ++#ifdef PAH_DEBUG ++ fprintf (stderr, "polkit-agent-helper-1: sending D-Bus message to PolicyKit daemon\n"); ++#endif /* PAH_DEBUG */ ++ ++ /* now send a D-Bus message to the PolicyKit daemon that ++ * includes a) the cookie; and b) the user we authenticated ++ */ ++ if (!send_dbus_message (cookie, user_to_auth)) ++ { ++#ifdef PAH_DEBUG ++ fprintf (stderr, "polkit-agent-helper-1: error sending D-Bus message to PolicyKit daemon\n"); ++#endif /* PAH_DEBUG */ ++ goto error; ++ } ++ ++#ifdef PAH_DEBUG ++ fprintf (stderr, "polkit-agent-helper-1: successfully sent D-Bus message to PolicyKit daemon\n"); ++#endif /* PAH_DEBUG */ ++ ++ fprintf (stdout, "SUCCESS\n"); ++ flush_and_wait(); ++ return 0; ++ ++error: ++ if (pam_h != NULL) ++ pam_end (pam_h, rc); ++ ++ fprintf (stdout, "FAILURE\n"); ++ flush_and_wait(); ++ return 1; ++} ++ ++static int ++conversation_function (int n, const struct pam_message **msg, struct pam_response **resp, void *data) ++{ ++ struct pam_response *aresp; ++ char buf[PAM_MAX_RESP_SIZE]; ++ int i; ++ ++ data = data; ++ if (n <= 0 || n > PAM_MAX_NUM_MSG) ++ return PAM_CONV_ERR; ++ ++ if ((aresp = calloc(n, sizeof *aresp)) == NULL) ++ return PAM_BUF_ERR; ++ ++ for (i = 0; i < n; ++i) ++ { ++ aresp[i].resp_retcode = 0; ++ aresp[i].resp = NULL; ++ switch (msg[i]->msg_style) ++ { ++ ++ case PAM_PROMPT_ECHO_OFF: ++ fprintf (stdout, "PAM_PROMPT_ECHO_OFF "); ++ goto conv1; ++ ++ case PAM_PROMPT_ECHO_ON: ++ fprintf (stdout, "PAM_PROMPT_ECHO_ON "); ++ conv1: ++ fputs (msg[i]->msg, stdout); ++ if (strlen (msg[i]->msg) > 0 && msg[i]->msg[strlen (msg[i]->msg) - 1] != '\n') ++ fputc ('\n', stdout); ++ fflush (stdout); ++ ++ if (fgets (buf, sizeof buf, stdin) == NULL) ++ goto error; ++ ++ if (strlen (buf) > 0 && ++ buf[strlen (buf) - 1] == '\n') ++ buf[strlen (buf) - 1] = '\0'; ++ ++ aresp[i].resp = strdup (buf); ++ if (aresp[i].resp == NULL) ++ goto error; ++ break; ++ ++ case PAM_ERROR_MSG: ++ fprintf (stdout, "PAM_ERROR_MSG "); ++ goto conv2; ++ ++ case PAM_TEXT_INFO: ++ fprintf (stdout, "PAM_TEXT_INFO "); ++ conv2: ++ fputs (msg[i]->msg, stdout); ++ if (strlen (msg[i]->msg) > 0 && ++ msg[i]->msg[strlen (msg[i]->msg) - 1] != '\n') ++ fputc ('\n', stdout); ++ fflush (stdout); ++ break; ++ ++ default: ++ goto error; ++ } ++ } ++ ++ *resp = aresp; ++ return PAM_SUCCESS; ++ ++error: ++ ++ for (i = 0; i < n; ++i) ++ { ++ if (aresp[i].resp != NULL) { ++ memset (aresp[i].resp, 0, strlen(aresp[i].resp)); ++ free (aresp[i].resp); ++ } ++ } ++ memset (aresp, 0, n * sizeof *aresp); ++ *resp = NULL; ++ return PAM_CONV_ERR; ++} ++ +diff --git a/src/polkitagent/polkitagenthelper-shadow.c b/src/polkitagent/polkitagenthelper-shadow.c +new file mode 100644 +index 0000000..7435533 +--- /dev/null ++++ b/src/polkitagent/polkitagenthelper-shadow.c +@@ -0,0 +1,189 @@ ++/* ++ * Copyright (C) 2008 Red Hat, Inc. ++ * Copyright (C) 2009-2010 Andrew Psaltis <ampsaltis@gmail.com> ++ * ++ * This library is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU Lesser General Public ++ * License as published by the Free Software Foundation; either ++ * version 2 of the License, or (at your option) any later version. ++ * ++ * This library is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * Lesser General Public License for more details. ++ * ++ * You should have received a copy of the GNU Lesser General ++ * Public License along with this library; if not, write to the ++ * Free Software Foundation, Inc., 59 Temple Place, Suite 330, ++ * Boston, MA 02111-1307, USA. ++ * ++ * Authors: Andrew Psaltis <ampsaltis@gmail.com>, based on ++ * polkitagenthelper.c which was written by ++ * David Zeuthen <davidz@redhat.com> ++ */ ++ ++#include "config.h" ++#include <stdio.h> ++#include <stdlib.h> ++#include <string.h> ++#include <unistd.h> ++#include <sys/types.h> ++#include <sys/stat.h> ++#include <syslog.h> ++#include <shadow.h> ++#include <grp.h> ++#include <pwd.h> ++#include <time.h> ++ ++#include <polkit/polkit.h> ++#include "polkitagenthelperprivate.h" ++ ++ ++extern char *crypt (); ++static int shadow_authenticate (struct spwd *shadow); ++ ++int ++main (int argc, char *argv[]) ++{ ++ struct spwd *shadow; ++ const char *user_to_auth; ++ const char *cookie; ++ time_t tm; ++ ++ /* clear the entire environment to avoid attacks with ++ libraries honoring environment variables */ ++ if (clearenv () != 0) ++ goto error; ++ ++ /* set a minimal environment */ ++ setenv ("PATH", "/usr/sbin:/usr/bin:/sbin:/bin", 1); ++ ++ /* check that we are setuid root */ ++ if (geteuid () != 0) ++ { ++ fprintf (stderr, "polkit-agent-helper-1: needs to be setuid root\n"); ++ goto error; ++ } ++ ++ openlog ("polkit-agent-helper-1", LOG_CONS | LOG_PID, LOG_AUTHPRIV); ++ ++ /* check for correct invocation */ ++ if (argc != 3) ++ { ++ syslog (LOG_NOTICE, "inappropriate use of helper, wrong number of arguments [uid=%d]", getuid ()); ++ fprintf (stderr, "polkit-agent-helper-1: wrong number of arguments. This incident has been logged.\n"); ++ goto error; ++ } ++ ++ if (getuid () != 0) ++ { ++ /* check we're running with a non-tty stdin */ ++ if (isatty (STDIN_FILENO) != 0) ++ { ++ syslog (LOG_NOTICE, "inappropriate use of helper, stdin is a tty [uid=%d]", getuid ()); ++ fprintf (stderr, "polkit-agent-helper-1: inappropriate use of helper, stdin is a tty. This incident has been logged.\n"); ++ goto error; ++ } ++ } ++ ++ user_to_auth = argv[1]; ++ cookie = argv[2]; ++ ++#ifdef PAH_DEBUG ++ fprintf (stderr, "polkit-agent-helper-1: user to auth is '%s'.\n", user_to_auth); ++#endif /* PAH_DEBUG */ ++ ++ /* Ask shadow about the user requesting authentication */ ++ if ((shadow = getspnam (user_to_auth)) == NULL) ++ { ++ syslog (LOG_NOTICE, "shadow file data information request for user %s [uid=%d] failed", user_to_auth, getuid()); ++ fprintf(stderr, "polkit-agent-helper-1: could not get shadow information for%.100s", user_to_auth); ++ goto error; ++ } ++ ++ /* Check the user's identity */ ++ if(!shadow_authenticate (shadow)) ++ { ++ syslog (LOG_NOTICE, "authentication failure [uid=%d] trying to authenticate '%s'", getuid (), user_to_auth); ++ fprintf (stderr, "polkit-agent-helper-1: authentication failure. This incident has been logged.\n"); ++ goto error; ++ } ++ ++ /* Check whether the user's password has expired */ ++ time(&tm); ++ if( shadow->sp_max >= 0 && (shadow->sp_lstchg + shadow->sp_max) * 60 * 60 * 24 <= tm) ++ { ++ syslog (LOG_NOTICE, "password expired for user '%s' [uid=%d] trying to authenticate", user_to_auth, getuid () ); ++ fprintf (stderr, "polkit-agent-helper-1: authorization failure. This incident has been logged.\n"); ++ goto error; ++ } ++ ++ /* Check whether the user's password has aged (and account expired along ++ * with it) ++ */ ++ if( shadow->sp_inact >= 0 && (shadow->sp_lstchg + shadow->sp_max + shadow->sp_inact) * 60 * 60 * 24 <= tm) ++ { ++ syslog (LOG_NOTICE, "password aged for user '%s' [uid=%d] trying to authenticate", user_to_auth, getuid () ); ++ fprintf (stderr, "polkit-agent-helper-1: authorization failure. This incident has been logged.\n"); ++ goto error; ++ } ++ ++ /* Check whether the user's account has expired */ ++ if(shadow->sp_expire >= 0 && shadow->sp_expire * 60 * 60 * 24 <= tm) ++ { ++ syslog (LOG_NOTICE, "account expired for user '%s' [uid=%d] trying to authenticate", user_to_auth, getuid () ); ++ fprintf (stderr, "polkit-agent-helper-1: authorization failure. This incident has been logged.\n"); ++ goto error; ++ } ++ ++#ifdef PAH_DEBUG ++ fprintf (stderr, "polkit-agent-helper-1: sending D-Bus message to PolicyKit daemon\n"); ++#endif /* PAH_DEBUG */ ++ ++ /* now send a D-Bus message to the PolicyKit daemon that ++ * includes a) the cookie; and b) the user we authenticated ++ */ ++ if (!send_dbus_message (cookie, user_to_auth)) ++ { ++#ifdef PAH_DEBUG ++ fprintf (stderr, "polkit-agent-helper-1: error sending D-Bus message to PolicyKit daemon\n"); ++#endif /* PAH_DEBUG */ ++ goto error; ++ } ++ ++#ifdef PAH_DEBUG ++ fprintf (stderr, "polkit-agent-helper-1: successfully sent D-Bus message to PolicyKit daemon\n"); ++#endif /* PAH_DEBUG */ ++ ++ fprintf (stdout, "SUCCESS\n"); ++ flush_and_wait(); ++ return 0; ++ ++error: ++ fprintf (stdout, "FAILURE\n"); ++ flush_and_wait(); ++ return 1; ++} ++ ++static int ++shadow_authenticate(struct spwd *shadow) ++{ ++ /* Speak PAM to the daemon, thanks to David Zeuthen for the idea. */ ++ char passwd[512]; ++ fprintf(stdout, "PAM_PROMPT_ECHO_OFF password:\n"); ++ fflush(stdout); ++ usleep (10 * 1000); /* since fflush(3) seems buggy */ ++ ++ if (fgets (passwd, sizeof (passwd), stdin) == NULL) ++ goto error; ++ ++ if (strlen (passwd) > 0 && passwd[strlen (passwd) - 1] == '\n') ++ passwd[strlen (passwd) - 1] = '\0'; ++ ++ if (strcmp (shadow->sp_pwdp, crypt (passwd, shadow->sp_pwdp)) != 0) ++ goto error; ++ return 1; ++error: ++ return 0; ++} ++ +diff --git a/src/polkitagent/polkitagenthelper.c b/src/polkitagent/polkitagenthelper.c +deleted file mode 100644 +index cca86db..0000000 +--- a/src/polkitagent/polkitagenthelper.c ++++ /dev/null +@@ -1,339 +0,0 @@ +-/* +- * Copyright (C) 2008 Red Hat, Inc. +- * +- * This library is free software; you can redistribute it and/or +- * modify it under the terms of the GNU Lesser General Public +- * License as published by the Free Software Foundation; either +- * version 2 of the License, or (at your option) any later version. +- * +- * This library is distributed in the hope that it will be useful, +- * but WITHOUT ANY WARRANTY; without even the implied warranty of +- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +- * Lesser General Public License for more details. +- * +- * You should have received a copy of the GNU Lesser General +- * Public License along with this library; if not, write to the +- * Free Software Foundation, Inc., 59 Temple Place, Suite 330, +- * Boston, MA 02111-1307, USA. +- * +- * Author: David Zeuthen <davidz@redhat.com> +- */ +- +-#include "config.h" +-#include <stdio.h> +-#include <stdlib.h> +-#include <string.h> +-#include <unistd.h> +-#include <sys/types.h> +-#include <sys/stat.h> +-#include <syslog.h> +-#include <security/pam_appl.h> +- +-#include <polkit/polkit.h> +- +-#ifdef HAVE_SOLARIS +-# define LOG_AUTHPRIV (10<<3) +-#endif +- +-#ifndef HAVE_CLEARENV +-extern char **environ; +- +-static int +-clearenv (void) +-{ +- if (environ != NULL) +- environ[0] = NULL; +- return 0; +-} +-#endif +- +-/* Development aid: define PAH_DEBUG to get debugging output. Do _NOT_ +- * enable this in production builds; it may leak passwords and other +- * sensitive information. +- */ +-#undef PAH_DEBUG +-// #define PAH_DEBUG +- +-static gboolean send_dbus_message (const char *cookie, const char *user); +- +-static int conversation_function (int n, const struct pam_message **msg, struct pam_response **resp, void *data); +- +-int +-main (int argc, char *argv[]) +-{ +- int rc; +- const char *user_to_auth; +- const char *cookie; +- struct pam_conv pam_conversation; +- pam_handle_t *pam_h; +- const void *authed_user; +- +- rc = 0; +- pam_h = NULL; +- +- /* clear the entire environment to avoid attacks using with libraries honoring environment variables */ +- if (clearenv () != 0) +- goto error; +- +- /* set a minimal environment */ +- setenv ("PATH", "/usr/sbin:/usr/bin:/sbin:/bin", 1); +- +- /* check that we are setuid root */ +- if (geteuid () != 0) +- { +- fprintf (stderr, "polkit-agent-helper-1: needs to be setuid root\n"); +- goto error; +- } +- +- openlog ("polkit-agent-helper-1", LOG_CONS | LOG_PID, LOG_AUTHPRIV); +- +- /* check for correct invocation */ +- if (argc != 3) +- { +- syslog (LOG_NOTICE, "inappropriate use of helper, wrong number of arguments [uid=%d]", getuid ()); +- fprintf (stderr, "polkit-agent-helper-1: wrong number of arguments. This incident has been logged.\n"); +- goto error; +- } +- +- user_to_auth = argv[1]; +- cookie = argv[2]; +- +- if (getuid () != 0) +- { +- /* check we're running with a non-tty stdin */ +- if (isatty (STDIN_FILENO) != 0) +- { +- syslog (LOG_NOTICE, "inappropriate use of helper, stdin is a tty [uid=%d]", getuid ()); +- fprintf (stderr, "polkit-agent-helper-1: inappropriate use of helper, stdin is a tty. This incident has been logged.\n"); +- goto error; +- } +- } +- +-#ifdef PAH_DEBUG +- fprintf (stderr, "polkit-agent-helper-1: user to auth is '%s'.\n", user_to_auth); +-#endif /* PAH_DEBUG */ +- +- pam_conversation.conv = conversation_function; +- pam_conversation.appdata_ptr = NULL; +- +- /* start the pam stack */ +- rc = pam_start ("polkit-1", +- user_to_auth, +- &pam_conversation, +- &pam_h); +- if (rc != PAM_SUCCESS) +- { +- fprintf (stderr, "polkit-agent-helper-1: pam_start failed: %s\n", pam_strerror (pam_h, rc)); +- goto error; +- } +- +- /* set the requesting user */ +- rc = pam_set_item (pam_h, PAM_RUSER, user_to_auth); +- if (rc != PAM_SUCCESS) +- { +- fprintf (stderr, "polkit-agent-helper-1: pam_set_item failed: %s\n", pam_strerror (pam_h, rc)); +- goto error; +- } +- +- /* is user really user? */ +- rc = pam_authenticate (pam_h, 0); +- if (rc != PAM_SUCCESS) +- { +- fprintf (stderr, "polkit-agent-helper-1: pam_authenticated failed: %s\n", pam_strerror (pam_h, rc)); +- goto error; +- } +- +- /* permitted access? */ +- rc = pam_acct_mgmt (pam_h, 0); +- if (rc != PAM_SUCCESS) +- { +- fprintf (stderr, "polkit-agent-helper-1: pam_acct_mgmt failed: %s\n", pam_strerror (pam_h, rc)); +- goto error; +- } +- +- /* did we auth the right user? */ +- rc = pam_get_item (pam_h, PAM_USER, &authed_user); +- if (rc != PAM_SUCCESS) +- { +- fprintf (stderr, "polkit-agent-helper-1: pam_get_item failed: %s\n", pam_strerror (pam_h, rc)); +- goto error; +- } +- +- if (strcmp (authed_user, user_to_auth) != 0) +- { +- fprintf (stderr, "polkit-agent-helper-1: Tried to auth user '%s' but we got auth for user '%s' instead", +- user_to_auth, (const char *) authed_user); +- goto error; +- } +- +-#ifdef PAH_DEBUG +- fprintf (stderr, "polkit-agent-helper-1: successfully authenticated user '%s'.\n", user_to_auth); +-#endif /* PAH_DEBUG */ +- +- pam_end (pam_h, rc); +- pam_h = NULL; +- +-#ifdef PAH_DEBUG +- fprintf (stderr, "polkit-agent-helper-1: sending D-Bus message to PolicyKit daemon\n"); +-#endif /* PAH_DEBUG */ +- +- /* now send a D-Bus message to the PolicyKit daemon that +- * includes a) the cookie; and b) the user we authenticated +- */ +- if (!send_dbus_message (cookie, user_to_auth)) +- { +-#ifdef PAH_DEBUG +- fprintf (stderr, "polkit-agent-helper-1: error sending D-Bus message to PolicyKit daemon\n"); +-#endif /* PAH_DEBUG */ +- goto error; +- } +- +-#ifdef PAH_DEBUG +- fprintf (stderr, "polkit-agent-helper-1: successfully sent D-Bus message to PolicyKit daemon\n"); +-#endif /* PAH_DEBUG */ +- +- fprintf (stdout, "SUCCESS\n"); +- fflush (stdout); +- fflush (stderr); +- usleep (10 * 1000); /* since fflush(3) seems buggy */ +- return 0; +- +-error: +- if (pam_h != NULL) +- pam_end (pam_h, rc); +- +- fprintf (stdout, "FAILURE\n"); +- fflush (stdout); +- fflush (stderr); +- usleep (10 * 1000); /* since fflush(3) seems buggy */ +- return 1; +-} +- +-static int +-conversation_function (int n, const struct pam_message **msg, struct pam_response **resp, void *data) +-{ +- struct pam_response *aresp; +- char buf[PAM_MAX_RESP_SIZE]; +- int i; +- +- data = data; +- if (n <= 0 || n > PAM_MAX_NUM_MSG) +- return PAM_CONV_ERR; +- +- if ((aresp = calloc(n, sizeof *aresp)) == NULL) +- return PAM_BUF_ERR; +- +- for (i = 0; i < n; ++i) +- { +- aresp[i].resp_retcode = 0; +- aresp[i].resp = NULL; +- switch (msg[i]->msg_style) +- { +- +- case PAM_PROMPT_ECHO_OFF: +- fprintf (stdout, "PAM_PROMPT_ECHO_OFF "); +- goto conv1; +- +- case PAM_PROMPT_ECHO_ON: +- fprintf (stdout, "PAM_PROMPT_ECHO_ON "); +- conv1: +- fputs (msg[i]->msg, stdout); +- if (strlen (msg[i]->msg) > 0 && msg[i]->msg[strlen (msg[i]->msg) - 1] != '\n') +- fputc ('\n', stdout); +- fflush (stdout); +- +- if (fgets (buf, sizeof buf, stdin) == NULL) +- goto error; +- +- if (strlen (buf) > 0 && +- buf[strlen (buf) - 1] == '\n') +- buf[strlen (buf) - 1] = '\0'; +- +- aresp[i].resp = strdup (buf); +- if (aresp[i].resp == NULL) +- goto error; +- break; +- +- case PAM_ERROR_MSG: +- fprintf (stdout, "PAM_ERROR_MSG "); +- goto conv2; +- +- case PAM_TEXT_INFO: +- fprintf (stdout, "PAM_TEXT_INFO "); +- conv2: +- fputs (msg[i]->msg, stdout); +- if (strlen (msg[i]->msg) > 0 && +- msg[i]->msg[strlen (msg[i]->msg) - 1] != '\n') +- fputc ('\n', stdout); +- fflush (stdout); +- break; +- +- default: +- goto error; +- } +- } +- +- *resp = aresp; +- return PAM_SUCCESS; +- +-error: +- +- for (i = 0; i < n; ++i) +- { +- if (aresp[i].resp != NULL) { +- memset (aresp[i].resp, 0, strlen(aresp[i].resp)); +- free (aresp[i].resp); +- } +- } +- memset (aresp, 0, n * sizeof *aresp); +- *resp = NULL; +- return PAM_CONV_ERR; +-} +- +-static gboolean +-send_dbus_message (const char *cookie, const char *user) +-{ +- PolkitAuthority *authority; +- PolkitIdentity *identity; +- GError *error; +- gboolean ret; +- +- ret = FALSE; +- +- error = NULL; +- +- g_type_init (); +- +- authority = polkit_authority_get (); +- +- identity = polkit_unix_user_new_for_name (user, &error); +- if (identity == NULL) +- { +- g_printerr ("Error constructing identity: %s\n", error->message); +- g_error_free (error); +- goto out; +- } +- +- if (!polkit_authority_authentication_agent_response_sync (authority, +- cookie, +- identity, +- NULL, +- &error)) +- { +- g_printerr ("polkit-agent-helper-1: error response to PolicyKit daemon: %s\n", error->message); +- g_error_free (error); +- goto out; +- } +- +- ret = TRUE; +- +- out: +- +- if (identity != NULL) +- g_object_unref (identity); +- +- if (authority != NULL) +- g_object_unref (authority); +- +- return ret; +-} +diff --git a/src/polkitagent/polkitagenthelperprivate.c b/src/polkitagent/polkitagenthelperprivate.c +new file mode 100644 +index 0000000..abf5524 +--- /dev/null ++++ b/src/polkitagent/polkitagenthelperprivate.c +@@ -0,0 +1,97 @@ ++/* ++ * Copyright (C) 2009-2010 Red Hat, Inc. ++ * ++ * This library is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU Lesser General Public ++ * License as published by the Free Software Foundation; either ++ * version 2 of the License, or (at your option) any later version. ++ * ++ * This library is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * Lesser General Public License for more details. ++ * ++ * You should have received a copy of the GNU Lesser General ++ * Public License along with this library; if not, write to the ++ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, ++ * Boston, MA 02110-1301, USA. ++ * ++ * Authors: David Zeuthen <davidz@redhat.com>, ++ * Andrew Psaltis <ampsaltis@gmail.com> ++ */ ++ ++#include "polkitagenthelperprivate.h" ++#include <stdio.h> ++ ++#ifndef HAVE_CLEARENV ++extern char **environ; ++ ++static int ++clearenv (void) ++{ ++ if (environ != NULL) ++ environ[0] = NULL; ++ return 0; ++} ++#endif ++ ++ ++gboolean ++send_dbus_message (const char *cookie, const char *user) ++{ ++ PolkitAuthority *authority; ++ PolkitIdentity *identity; ++ GError *error; ++ gboolean ret; ++ ++ ret = FALSE; ++ ++ error = NULL; ++ ++ g_type_init (); ++ ++ authority = polkit_authority_get (); ++ ++ identity = polkit_unix_user_new_for_name (user, &error); ++ if (identity == NULL) ++ { ++ g_printerr ("Error constructing identity: %s\n", error->message); ++ g_error_free (error); ++ goto out; ++ } ++ ++ if (!polkit_authority_authentication_agent_response_sync (authority, ++ cookie, ++ identity, ++ NULL, ++ &error)) ++ { ++ g_printerr ("polkit-agent-helper-1: error response to PolicyKit daemon: %s\n", error->message); ++ g_error_free (error); ++ goto out; ++ } ++ ++ ret = TRUE; ++ ++ out: ++ ++ if (identity != NULL) ++ g_object_unref (identity); ++ ++ if (authority != NULL) ++ g_object_unref (authority); ++ ++ return ret; ++} ++ ++/* fflush(3) stdin and stdout and wait a little bit. ++ * This replaces the three-line commands at the bottom of ++ * polkit-agent-helper-1's main() function. ++ */ ++void ++flush_and_wait () ++{ ++ fflush (stdout); ++ fflush (stderr); ++ usleep (10 * 1000); /* since fflush(3) seems buggy */ ++} +diff --git a/src/polkitagent/polkitagenthelperprivate.h b/src/polkitagent/polkitagenthelperprivate.h +new file mode 100644 +index 0000000..16f7ba4 +--- /dev/null ++++ b/src/polkitagent/polkitagenthelperprivate.h +@@ -0,0 +1,42 @@ ++/* ++ * Copyright (C) 2009-2010 Red Hat, Inc. ++ * ++ * This library is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU Lesser General Public ++ * License as published by the Free Software Foundation; either ++ * version 2 of the License, or (at your option) any later version. ++ * ++ * This library is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * Lesser General Public License for more details. ++ * ++ * You should have received a copy of the GNU Lesser General ++ * Public License along with this library; if not, write to the ++ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, ++ * Boston, MA 02110-1301, USA. ++ * ++ * Authors: David Zeuthen <davidz@redhat.com>, ++ * Andrew Psaltis <ampsalits@gmail.com> ++ */ ++#ifndef __POLKIT_AGENT_HELPER_PRIVATE_H ++#define __POLKIT_AGENT_HELPER_PRIVATE_H ++ ++#include <polkit/polkit.h> ++ ++/* Development aid: define PAH_DEBUG to get debugging output. Do _NOT_ ++ * enable this in production builds; it may leak passwords and other ++ * sensitive information. ++ */ ++#undef PAH_DEBUG ++// #define PAH_DEBUG ++ ++#ifdef HAVE_SOLARIS ++# define LOG_AUTHPRIV (10<<3) ++#endif ++ ++gboolean send_dbus_message (const char *cookie, const char *user); ++ ++void flush_and_wait (); ++ ++#endif /* __POLKIT_AGENT_HELPER_PRIVATE_H */ +diff --git a/src/programs/pkexec.c b/src/programs/pkexec.c +index 17c191e..3e096bf 100644 +--- a/src/programs/pkexec.c ++++ b/src/programs/pkexec.c +@@ -34,7 +34,11 @@ + #include <grp.h> + #include <pwd.h> + #include <errno.h> ++ ++#ifdef POLKIT_AUTHFW_PAM + #include <security/pam_appl.h> ++#endif /* POLKIT_AUTHFW_PAM */ ++ + #include <syslog.h> + #include <stdarg.h> + +@@ -115,6 +119,7 @@ log_message (gint level, + + /* ---------------------------------------------------------------------------------------------------- */ + ++#ifdef POLKIT_AUTHFW_PAM + static int + pam_conversation_function (int n, + const struct pam_message **msg, +@@ -167,6 +172,7 @@ out: + pam_end (pam_h, rc); + return ret; + } ++#endif /* POLKIT_AUTHFW_PAM */ + + /* ---------------------------------------------------------------------------------------------------- */ + +@@ -741,11 +747,13 @@ main (int argc, char *argv[]) + * TODO: The question here is whether we should clear the limits before applying them? + * As evident above, neither su(1) (and, for that matter, nor sudo(8)) does this. + */ ++#ifdef POLKIT_AUTHW_PAM + if (!open_session (pw->pw_name)) + { + goto out; + } +- ++#endif /* POLKIT_AUTHFW_PAM */ ++ + /* become the user */ + if (setgroups (0, NULL) != 0) + { diff --git a/source/l/polkit/polkit.SlackBuild b/source/l/polkit/polkit.SlackBuild new file mode 100755 index 000000000..74193f135 --- /dev/null +++ b/source/l/polkit/polkit.SlackBuild @@ -0,0 +1,144 @@ +#!/bin/sh + +# Copyright 2009 Robby Workman, Northport, Alabama, USA +# Copyright 2010 Eric Hameleers, Eindhoven, NL +# Copyright 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA +# All rights reserved. + +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + +PKGNAM=polkit +VERSION=${VERSION:-1_14bdfd8} +BUILD=${BUILD:-1} +NUMJOBS=${NUMJOBS:--j6} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-$PKGNAM + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "s390" ]; then + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + +rm -rf $PKG +mkdir -p $TMP $PKG +cd $TMP +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.bz2 || exit 1 +cd $PKGNAM-$VERSION || exit 1 + +# Apply the patch that makes --with-authfw=shadow work +cat $CWD/polkit-1-shadow.diff | patch -p1 --verbose || exit 1 + +# Make sure ownerships and permissions are sane: +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +# Configure: +# Using polkit-user=hald for now for easier transition; I don't think the +# separate user account is actually required any more, but I could be wrong +CFLAGS="$SLKCFLAGS" \ +CXXFLAGS="$SLKCFLAGS" \ +./autogen.sh \ + --prefix=/usr \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --sysconfdir=/etc \ + --localstatedir=/var \ + --enable-gtk-doc \ + --docdir=/usr/doc/$PKGNAM-$VERSION \ + --enable-man-pages \ + --mandir=/usr/man \ + --disable-static \ + --disable-introspection \ + --with-authfw=shadow \ + --enable-verbose-mode \ + --build=$ARCH-slackware-linux + # Deprecated: + #--with-polkit-user=hald \ + +#NOTE: The directory /etc/polkit-1/localauthority must be owned +# by root and have mode 700 +#NOTE: The directory /var/lib/polkit-1 must be owned +# by root and have mode 700 +#NOTE: The file ${exec_prefix}/libexec/polkit-agent-helper-1 must be owned +# by root and have mode 4755 (setuid root binary) +#NOTE: The file ${exec_prefix}/bin/pkexec must be owned by root and +# have mode 4755 (setuid root binary) + +# Build and install: +make $NUMJOBS || make || exit 1 +make install DESTDIR=$PKG || exit 1 + +# Strip binaries: +find $PKG | xargs file | grep -e "executable" -e "shared object" \ + | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + +# Compress and link manpages, if any: +if [ -d $PKG/usr/man ]; then + ( cd $PKG/usr/man + for manpagedir in $(find . -type d -name "man*") ; do + ( cd $manpagedir + for eachpage in $( find . -type l -maxdepth 1) ; do + ln -s $( readlink $eachpage ).gz $eachpage.gz + rm $eachpage + done + gzip -9 *.* + ) + done + ) +fi + +# Add a documentation directory: +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION +cp -a \ + AUTHORS COPYING ChangeLog HACKING INSTALL NEWS README \ + $PKG/usr/doc/$PKGNAM-$VERSION +( cd $PKG/usr/doc/$PKGNAM-$VERSION; ln -s ../../share/gtk-doc/html/polkit-1 html +) + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc + +cd $PKG +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz + diff --git a/source/l/polkit/slack-desc b/source/l/polkit/slack-desc new file mode 100644 index 000000000..006d8a8e5 --- /dev/null +++ b/source/l/polkit/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler-----------------------------------------------------| +polkit: polkit (authentication framework) +polkit: +polkit: PolicyKit is an application-level toolkit for defining and handling +polkit: the policy that allows unprivileged processes to speak to privileged +polkit: processes. PolicyKit is specifically targeting applications in rich +polkit: desktop environments on multi-user UNIX-like operating systems. +polkit: +polkit: +polkit: +polkit: Home: http://www.freedesktop.org/wiki/Software/PolicyKit +polkit: diff --git a/source/l/poppler-data/poppler-data.SlackBuild b/source/l/poppler-data/poppler-data.SlackBuild index 090004d48..aa07f24d9 100755 --- a/source/l/poppler-data/poppler-data.SlackBuild +++ b/source/l/poppler-data/poppler-data.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2006, 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006, 2007, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,7 +22,7 @@ PKGNAM=poppler-data -VERSION=${VERSION:-0.2.1} +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} ARCH=${ARCH:-noarch} BUILD=${BUILD:-1} @@ -35,7 +35,7 @@ mkdir -p $TMP $PKG cd $TMP rm -rf ${PKGNAM}-${VERSION} -tar xvf $CWD/${PKGNAM}-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1 cd ${PKGNAM}-$VERSION # Make sure ownerships and permissions are sane: @@ -52,7 +52,7 @@ make install datadir=/usr/share DESTDIR=$PKG # Add a documentation directory: mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION cp -a \ - COPYING README \ + COPYING* README \ $PKG/usr/doc/${PKGNAM}-$VERSION mkdir -p $PKG/install diff --git a/source/l/poppler/poppler.SlackBuild b/source/l/poppler/poppler.SlackBuild index 4f4f6f304..dcf3e8997 100755 --- a/source/l/poppler/poppler.SlackBuild +++ b/source/l/poppler/poppler.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2006, 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006, 2007, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,10 +22,19 @@ PKGNAM=poppler -VERSION=${VERSION:-0.10.7} -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + NUMJOBS=${NUMJOBS:-" -j7 "} if [ "$ARCH" = "i486" ]; then @@ -37,6 +46,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -95,6 +107,14 @@ cp -a AUTHORS COPYING* INSTALL NEWS README README-XPDF TODO \ ( cd $PKG/usr/doc/${PKGNAM}-$VERSION ln -s /usr/share/gtk-doc/html/poppler html ) +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/l/popt/popt.SlackBuild b/source/l/popt/popt.SlackBuild index 4e01dd527..b495de5c2 100755 --- a/source/l/popt/popt.SlackBuild +++ b/source/l/popt/popt.SlackBuild @@ -23,15 +23,22 @@ PKGNAM=popt VERSION=${VERSION:-1.7} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +BUILD=${BUILD:-3} +NUMJOBS=${NUMJOBS:-" -j7 "} + +# Automatically determine architecture for build & packaging: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-${PKGNAM} -rm -rf $PKG -mkdir -p $TMP $PKG if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -42,8 +49,13 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi +rm -rf $PKG +mkdir -p $TMP $PKG cd $TMP rm -rf ${PKGNAM}-${VERSION} tar xjvf $CWD/${PKGNAM}-$VERSION.tar.bz2 || exit 1 @@ -69,15 +81,23 @@ CFLAGS="$SLKCFLAGS" \ --build=$ARCH-slackware-linux # Build and install: -make -j4 || exit 1 +make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG || exit 1 -# Strip binaries: -( cd $PKG - find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null +# Move the binary and shared library to /sbin and /lib(64) +mkdir -p $PKG/lib${LIBDIRSUFFIX} +( cd $PKG/usr/lib${LIBDIRSUFFIX} + for file in lib*.so.?.* ; do + mv $file ../../lib${LIBDIRSUFFIX} + ln -sf ../../lib${LIBDIRSUFFIX}/$file . + done + cp -a lib*.so.? ../../lib${LIBDIRSUFFIX} ) +# Strip binaries: +find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ + | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + # Compress and link manpages, if any: if [ -d $PKG/usr/man ]; then ( cd $PKG/usr/man diff --git a/source/l/pycairo/pycairo.SlackBuild b/source/l/pycairo/pycairo.SlackBuild index f8ab9c71e..2ca6a2f2d 100755 --- a/source/l/pycairo/pycairo.SlackBuild +++ b/source/l/pycairo/pycairo.SlackBuild @@ -3,7 +3,7 @@ # Slackware build script for pycairo # Copyright 2007 by Eric Hameleers <alien@slackbuilds.org> -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -24,13 +24,22 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -PRGNAM=pycairo -VERSION=1.8.4 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-3} +PKGNAM=pycairo +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:-" -j7 "} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" @@ -43,19 +52,22 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-$PRGNAM +PKG=$TMP/package-$PKGNAM rm -rf $PKG mkdir -p $TMP $PKG cd $TMP -rm -rf $PRGNAM-$VERSION -tar xvf $CWD/$PRGNAM-$VERSION.tar.*z* || exit 1 -cd $PRGNAM-$VERSION +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1 +cd $PKGNAM-$VERSION chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -80,14 +92,22 @@ make install DESTDIR=$PKG || exit 1 find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION cp -a \ - AUTHORS COPYING* ChangeLog INSTALL NEWS NOTES README \ - $PKG/usr/doc/$PRGNAM-$VERSION + AUTHORS COPYING* INSTALL NEWS README \ + $PKG/usr/doc/$PKGNAM-$VERSION + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/l/pycairo/pycairo.info b/source/l/pycairo/pycairo.info deleted file mode 100644 index 5882ba318..000000000 --- a/source/l/pycairo/pycairo.info +++ /dev/null @@ -1,2 +0,0 @@ -HOMEPAGE="http://cairographics.org/pycairo" -DOWNLOAD="http://cairographics.org/releases/pycairo-1.8.2.tar.gz" diff --git a/source/l/pycairo/pycairo.url b/source/l/pycairo/pycairo.url new file mode 100644 index 000000000..afad76d4d --- /dev/null +++ b/source/l/pycairo/pycairo.url @@ -0,0 +1,2 @@ +http://cairographics.org/pycairo +http://cairographics.org/releases/ diff --git a/source/l/pycups/pycups.SlackBuild b/source/l/pycups/pycups.SlackBuild index a250d508e..00c8f3e12 100755 --- a/source/l/pycups/pycups.SlackBuild +++ b/source/l/pycups/pycups.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh # Copyright 2008 Heinz Wiesinger <hmwiesinger@gmx.at> -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -24,22 +24,32 @@ # Modified by Robby Workman <rworkman@slackware.com> -PRGNAM=pycups -VERSION=${VERSION:-1.9.45} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +PKGNAM=pycups +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + NUMJOBS=${NUMJOBS:--j6} CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-$PRGNAM +PKG=$TMP/package-$PKGNAM rm -rf $PKG mkdir -p $TMP $PKG cd $TMP || exit 1 -rm -rf $PRGNAM-$VERSION -tar xvf $CWD/$PRGNAM-$VERSION.tar.bz2 || exit 1 -cd $PRGNAM-$VERSION || exit 1 +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1 +cd $PKGNAM-$VERSION || exit 1 chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -53,12 +63,20 @@ make install DESTDIR=$PKG || exit 1 find $PKG | xargs file | grep -e "shared object" -e "executable" | grep ELF \ | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION -cp -a COPYING* NEWS README TODO $PKG/usr/doc/$PRGNAM-$VERSION +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION +cp -a COPYING* NEWS README TODO $PKG/usr/doc/$PKGNAM-$VERSION + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/l/pygobject/pygobject.SlackBuild b/source/l/pygobject/pygobject.SlackBuild index a6750e3d5..a54d2bd34 100755 --- a/source/l/pygobject/pygobject.SlackBuild +++ b/source/l/pygobject/pygobject.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh # Copyright 2007, 2008 Erik Hanson erik@slackbuilds.org -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,13 +22,22 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -PRGNAM=pygobject -VERSION=2.16.1 -ARCH=${ARCH:-x86_64} +PKGNAM=pygobject +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:-" -j7 "} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" @@ -41,18 +50,21 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-$PRGNAM +PKG=$TMP/package-$PKGNAM + rm -rf $PKG mkdir -p $TMP $PKG - cd $TMP -rm -rf $PRGNAM-$VERSION -tar xvf $CWD/$PRGNAM-$VERSION.tar.bz2 || exit 1 -cd $PRGNAM-$VERSION || exit 1 +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.bz2 || exit 1 +cd $PKGNAM-$VERSION || exit 1 chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -75,17 +87,25 @@ make install DESTDIR=$PKG || exit 1 find $PKG | xargs file | grep -e "executable" -e "shared object" \ | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION cp -a \ INSTALL AUTHORS COPYING NEWS README \ - $PKG/usr/doc/$PRGNAM-$VERSION -( cd $PKG/usr/doc/$PRGNAM-$VERSION + $PKG/usr/doc/$PKGNAM-$VERSION +( cd $PKG/usr/doc/$PKGNAM-$VERSION ln -s ../../share/gtk-doc/html/pygobject html ) +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/l/pygobject/pygobject.info b/source/l/pygobject/pygobject.info deleted file mode 100644 index b67cef497..000000000 --- a/source/l/pygobject/pygobject.info +++ /dev/null @@ -1,2 +0,0 @@ -HOMEPAGE="http://www.pygtk.org/" -DOWNLOAD="http://ftp.gnome.org/pub/GNOME/sources/pygobject/2.16/pygobject-2.16.0.tar.bz2" diff --git a/source/l/pygobject/pygobject.url b/source/l/pygobject/pygobject.url new file mode 100644 index 000000000..85ab64cf1 --- /dev/null +++ b/source/l/pygobject/pygobject.url @@ -0,0 +1,2 @@ +http://www.pygtk.org/ +http://ftp.gnome.org/pub/GNOME/sources/pygobject/ diff --git a/source/l/pygtk/pygtk.SlackBuild b/source/l/pygtk/pygtk.SlackBuild index 3055ba30e..7823f4dd8 100755 --- a/source/l/pygtk/pygtk.SlackBuild +++ b/source/l/pygtk/pygtk.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh # Copyright 2007 Erik Hanson erik@slackbuilds.org -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,13 +22,26 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -PRGNAM=pygtk -VERSION=2.14.1 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +PKGNAM=pygtk +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:-" -j7 "} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-$PKGNAM + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" @@ -41,18 +54,17 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi -CWD=$(pwd) -TMP=${TMP:-/tmp} -PKG=$TMP/package-$PRGNAM rm -rf $PKG mkdir -p $TMP $PKG - cd $TMP || exit 1 -rm -rf $PRGNAM-$VERSION -tar xvf $CWD/$PRGNAM-$VERSION.tar.bz2 || exit 1 -cd $PRGNAM-$VERSION || exit 1 +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.bz2 || exit 1 +cd $PKGNAM-$VERSION || exit 1 chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -75,17 +87,25 @@ make install DESTDIR=$PKG || exit 1 find $PKG | xargs file | grep -e "executable" -e "shared object" \ | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION cp -a \ MAPPING PKG-INFO INSTALL TODO AUTHORS COPYING NEWS README \ - $PKG/usr/doc/$PRGNAM-$VERSION -( cd $PKG/usr/doc/$PRGNAM-$VERSION + $PKG/usr/doc/$PKGNAM-$VERSION +( cd $PKG/usr/doc/$PKGNAM-$VERSION ln -s ../../share/gtk-doc/html/pygtk html ) +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/l/qca/qca.SlackBuild b/source/l/qca/qca.SlackBuild index de767cf53..49367ffc9 100755 --- a/source/l/qca/qca.SlackBuild +++ b/source/l/qca/qca.SlackBuild @@ -24,11 +24,19 @@ # No additional license terms and no copyright claim PKGNAM=qca -VERSION=2.0.1 -ARCH=${ARCH:-x86_64} +VERSION=2.0.2 BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:--j6} +# Automatically determine architecture for build & packaging: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-${PKGNAM} diff --git a/source/l/qt/README b/source/l/qt/README index c5b4d85a9..bdf9be993 100644 --- a/source/l/qt/README +++ b/source/l/qt/README @@ -1,6 +1,8 @@ -qt-rXXXXXX is actually qt-copy (kde's own version that might be -slightly incompatible with released version) renamed. +qt-<version>_<git revision> is actually KDE's version of Qt from git +that includes important patches not yet present in mainline Qt. -It also contains less documentation -- you can grab the vanilla -Qt if you need it. +The recommended version of Qt for KDE may be obtained from the +repository with this command: + +git clone git://gitorious.org/+kde-developers/qt/kde-qt.git diff --git a/source/l/qt/qt.SlackBuild b/source/l/qt/qt.SlackBuild index 3bd6fe560..c04221c34 100755 --- a/source/l/qt/qt.SlackBuild +++ b/source/l/qt/qt.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2006, 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006, 2007, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -23,14 +23,30 @@ # Merged some ideas from Alex Sarmardzic's script for qt4 at SlackBuilds.org # ^^ Modified by Robby Workman <rworkman@slackware.com> for QT4 & KDE4 -# We're using qt-copy instead of a released qt version, as this svn release -# has at least one bugfix strongly recommended by the kde developers +# We're using qt-copy instead of a released qt version, as this git release +# has at least one bugfix strongly recommended by the kde developers. + +# Obtained from: +# git clone git://gitorious.org/+kde-developers/qt/kde-qt.git +# git checkout origin/4.5.3-patched +# git checkout origin/4.6.0-stable-patched +# git checkout origin/4.6.1-patched +# wget http://qt.gitorious.org/qt/kde-qt/archive-tarball/4.6.2-patched PKGNAM=qt -VERSION=$(ls qt-r*.tar.?z* | cut -d - -f 2 | cut -f 1 -d . | tail -1) -ARCH=${ARCH:-x86_64} +VERSION=$(ls qt-*.tar.?z* | cut -d - -f 2 | rev | cut -f 3- -d . | rev) BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + NUMJOBS=${NUMJOBS:--j7} if [ "$ARCH" = "i486" ]; then @@ -42,6 +58,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -92,25 +111,28 @@ fi # Fix path to mysql header zcat $CWD/qt.mysql.h.diff.gz | patch -p1 || exit 1 -# The "o" selects the Open Source edition of Qt. -# The "yes" agrees to the GPL, so don't run this script if you don't agree. :-) export CFLAGS="$SLKCFLAGS" export CXXFLAGS="$SLKCFLAGS" export OPENSOURCE_CXXFLAGS="$SLKCFLAGS" -echo "o -yes" | ./configure \ +./configure \ + -confirm-license \ + -opensource \ -prefix /usr/lib${LIBDIRSUFFIX}/qt \ -qt-gif \ -fast \ -system-libpng \ -system-libjpeg \ -system-zlib \ + -system-sqlite \ + -plugin-sql-sqlite \ -dbus \ -webkit \ -no-phonon \ -nomake examples \ -nomake demos \ - -no-separate-debug-info + -no-separate-debug-info \ + -no-pch + # No-precompiled-headers is ccache-friendly. # Sometimes a failure happens when parallelizing make. Try again if make fails, # but make a failure the second time around (single threaded) a fatal error: diff --git a/source/l/qt/slack-desc b/source/l/qt/slack-desc index 8229dd0a8..3f77a7fb4 100644 --- a/source/l/qt/slack-desc +++ b/source/l/qt/slack-desc @@ -15,5 +15,5 @@ qt: qt: qt: qt: -qt: +qt: Homepage: http://qt.nokia.com qt: diff --git a/source/l/qtscriptgenerator/qtscriptgenerator.SlackBuild b/source/l/qtscriptgenerator/qtscriptgenerator.SlackBuild index ed66c9bb5..9664ddb22 100755 --- a/source/l/qtscriptgenerator/qtscriptgenerator.SlackBuild +++ b/source/l/qtscriptgenerator/qtscriptgenerator.SlackBuild @@ -25,8 +25,17 @@ PRGNAM=qtscriptgenerator VERSION=${VERSION:-0.1.0} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-1} +BUILD=${BUILD:-2} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi CWD=$(pwd) TMP=${TMP:-/tmp} @@ -50,6 +59,9 @@ elif [ "$ARCH" = "arm" ]; then elif [ "$ARCH" = "armel" ]; then SLKCFLAGS="-O2 -march=armv4t" LIBDIRSUFFIX="" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi # Avoid a version number in .la files: @@ -63,6 +75,9 @@ cd $TMP rm -rf $PRGNAM-src-$VERSION tar xvf $CWD/$PRGNAM-src-$VERSION.tar.?z* || exit 1 cd $PRGNAM-src-$VERSION || exit 1 + +zcat $CWD/qtscriptgenerator.gcc44.diff.gz | patch -p1 --verbose || exit 1 + chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ diff --git a/source/l/qtscriptgenerator/qtscriptgenerator.gcc44.diff b/source/l/qtscriptgenerator/qtscriptgenerator.gcc44.diff new file mode 100644 index 000000000..165c97df0 --- /dev/null +++ b/source/l/qtscriptgenerator/qtscriptgenerator.gcc44.diff @@ -0,0 +1,10 @@ +--- ./generator/parser/rpp/pp-internal.h.orig 2009-02-20 05:42:24.000000000 -0600 ++++ ./generator/parser/rpp/pp-internal.h 2010-02-18 19:12:22.000000000 -0600 +@@ -16,6 +16,7 @@ + #define PP_INTERNAL_H + + #include <algorithm> ++#include <cstdio> + + namespace rpp { + diff --git a/source/l/raptor/raptor.SlackBuild b/source/l/raptor/raptor.SlackBuild index 386ef4c45..1c57b5d09 100755 --- a/source/l/raptor/raptor.SlackBuild +++ b/source/l/raptor/raptor.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh # Copyright 2007 Heinz Wiesinger <hmwiesinger@gmx.at> -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -25,10 +25,19 @@ # No added terms or copyright claims -VERSION=1.4.18 -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-$(echo raptor-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + NUMJOBS=${NUMJOBS:--j6} CWD=$(pwd) @@ -44,13 +53,16 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG mkdir -p $TMP $PKG cd $TMP rm -rf raptor-$VERSION -tar xvf $CWD/raptor-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/raptor-$VERSION.tar.xz || exit 1 cd raptor-$VERSION || exit 1 chown -R root:root . find . \ @@ -83,13 +95,21 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" \ mkdir -p $PKG/usr/doc/raptor-$VERSION cp -a \ - AUTHORS ChangeLog* COPYING* INSTALL* LICENSE* NEWS* \ + AUTHORS COPYING* INSTALL* LICENSE* NEWS* \ NOTICE README* RELEASE.html \ $PKG/usr/doc/raptor-$VERSION ( cd $PKG/usr/doc/raptor-$VERSION ln -s /usr/share/gtk-doc/html/raptor html ) +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/l/rasqal/rasqal.SlackBuild b/source/l/rasqal/rasqal.SlackBuild index 730d952d4..9ef4cbf3e 100755 --- a/source/l/rasqal/rasqal.SlackBuild +++ b/source/l/rasqal/rasqal.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh # Copyright 2007 Heinz Wiesinger <hmwiesinger@gmx.at> -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,18 +22,27 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. # Modified by Robby Workman <rworkman@slackware.com> +# Modified by Eric Hameleers <alien@slackware.com> # No added terms or copyright claims - -VERSION=0.9.16 -ARCH=${ARCH:-x86_64} +PKGNAM=rasqal +VERSION=${VERSION:-0.9.19} BUILD=${BUILD:-1} - NUMJOBS=${NUMJOBS:--j6} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-rasqal +PKG=$TMP/package-$PKGNAM if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -44,14 +53,17 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG mkdir -p $TMP $PKG cd $TMP -rm -rf rasqal-$VERSION -tar xvf $CWD/rasqal-$VERSION.tar.bz2 || exit 1 -cd rasqal-$VERSION || exit 1 +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1 +cd $PKGNAM-$VERSION || exit 1 chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -81,17 +93,17 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" \ for i in $( find . -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done ) -mkdir -p $PKG/usr/doc/rasqal-$VERSION +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION cp -a \ AUTHORS COPYING* INSTALL INSTALL.html LICENSE* NEWS* NOTICE README* \ - $PKG/usr/doc/rasqal-$VERSION -( cd $PKG/usr/doc/rasqal-$VERSION - ln -s /usr/share/gtk-doc/html/rasqal html + $PKG/usr/doc/$PKGNAM-$VERSION +( cd $PKG/usr/doc/$PKGNAM-$VERSION + ln -s /usr/share/gtk-doc/html/$PKGNAM html ) mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -/sbin/makepkg -l y -c n $TMP/rasqal-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/l/rasqal/rasqal.info b/source/l/rasqal/rasqal.info deleted file mode 100644 index 9605aee70..000000000 --- a/source/l/rasqal/rasqal.info +++ /dev/null @@ -1,5 +0,0 @@ -PRGNAM="rasqal" -VERSION="0.9.15" -HOMEPAGE="http://librdf.org/" -DOWNLOAD="http://download.librdf.org/source/rasqal-0.9.15.tar.gz" -MD5SUM="22aa82cd8953e2a870b6f183268a957f" diff --git a/source/l/rasqal/slack-desc b/source/l/rasqal/slack-desc index b029384b4..46e8b19c1 100644 --- a/source/l/rasqal/slack-desc +++ b/source/l/rasqal/slack-desc @@ -7,6 +7,6 @@ rasqal: constructing the queries, executing them and returning result formats. rasqal: It currently handles the RDF Data Query Language (RDQL) and SPARQL rasqal: Query language. rasqal: -rasqal: Homepage: http://librdf.org/ rasqal: +rasqal: Homepage: http://librdf.org/ rasqal: diff --git a/source/l/redland/redland.SlackBuild b/source/l/redland/redland.SlackBuild index 893d80efe..85ee69242 100755 --- a/source/l/redland/redland.SlackBuild +++ b/source/l/redland/redland.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh # Copyright 2007 Heinz Wiesinger <hmwiesinger@gmx.at> -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,17 +22,28 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. # Modified by Robby Workman <rworkman@slackware.com> +# Modified by Eric Hameleers <alien@slackware.com> # No added terms and no copyright claims -VERSION=1.0.8 -ARCH=${ARCH:-x86_64} +PKGNAM=redland +VERSION=${VERSION:-1.0.10} BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:--j6} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-redland +PKG=$TMP/package-$PKGNAM if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" @@ -43,14 +54,18 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG mkdir -p $TMP $PKG cd $TMP -rm -rf redland-$VERSION -tar xvf $CWD/redland-$VERSION.tar.bz2 || exit 1 -cd redland-$VERSION || exit 1 +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1 +cd $PKGNAM-$VERSION || exit 1 + chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -58,6 +73,16 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; +if [ "$VERSION" = "1.0.9" ]; then + echo "Fixing a bug in redland-1.0.9 that breaks nepomuk..." + for i in MYSQL POSTGRESQL SQLITE TSTORE; do + sed -i "s/LIBADD = @${i}_LIBS@/LIBADD = @${i}_LIBS@ librdf.la/" \ + src/Makefile.in + done +elif [ "$VERSION" = "1.0.10" ]; then + sed -i "s/virtuoso_la_LIBADD = @ODBC_LIBS@/virtuoso_la_LIBADD = @ODBC_LIBS@ librdf.la/" src/Makefile.in +fi + CFLAGS="$SLKCFLAGS" \ CXXFLAGS="$SLKCFLAGS" \ ./configure \ @@ -67,9 +92,14 @@ CXXFLAGS="$SLKCFLAGS" \ --localstatedir=/var \ --mandir=/usr/man \ --disable-static \ + --with-included-ltdl=no \ + --with-bdb-lib=/usr/lib${LIBDIRSUFFIX} \ --with-threads \ --build=$ARCH-slackware-linux +# Prevent error "No rule to make target `-lltdl', needed by `librdf.la'" +sed -i -e 's# -lltdl$# #' -e '/^LIBS =/s# = # = -lltdl #' src/Makefile + make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG || exit 1 @@ -81,18 +111,18 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" \ for i in $( find . -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done ) -mkdir -p $PKG/usr/doc/redland-$VERSION +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION cp -a \ AUTHORS COPYING* INSTALL INSTALL.html LICENSE* NEWS* NOTICE \ README* RELEASE.html TODO* \ - $PKG/usr/doc/redland-$VERSION -( cd $PKG/usr/doc/redland-$VERSION - ln -s /usr/share/gtk-doc/html/redland html + $PKG/usr/doc/$PKGNAM-$VERSION +( cd $PKG/usr/doc/$PKGNAM-$VERSION + ln -s /usr/share/gtk-doc/html/$PKGNAM html ) mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -/sbin/makepkg -l y -c n $TMP/redland-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/source/l/redland/redland.info b/source/l/redland/redland.info deleted file mode 100644 index 4ff4571c6..000000000 --- a/source/l/redland/redland.info +++ /dev/null @@ -1,5 +0,0 @@ -PRGNAM="redland" -VERSION="1.0.7" -HOMEPAGE="http://librdf.org/" -DOWNLOAD="http://download.librdf.org/source/redland-1.0.7.tar.gz" -MD5SUM="4c066d3dcf6c25f8fb8c9007e73f293c" diff --git a/source/l/sdl/SDL_mixer-1.2.8.usrlocal.diff b/source/l/sdl/SDL_mixer-1.2.8.usrlocal.diff deleted file mode 100644 index 3ae36ae72..000000000 --- a/source/l/sdl/SDL_mixer-1.2.8.usrlocal.diff +++ /dev/null @@ -1,11 +0,0 @@ ---- ./timidity/config.h.orig 2007-07-01 21:03:51.000000000 -0500 -+++ ./timidity/config.h 2008-03-13 14:36:20.000000000 -0500 -@@ -176,7 +176,7 @@ - #if defined(__WIN32__) || defined(__OS2__) - #define DEFAULT_PATH "\\TIMIDITY" - #else --#define DEFAULT_PATH "/usr/local/lib/timidity" -+#define DEFAULT_PATH "/usr/lib/timidity" - #endif - - /* These affect general volume */ diff --git a/source/l/sdl/SDL_mixer.usrlocal.diff b/source/l/sdl/SDL_mixer.usrlocal.diff new file mode 100644 index 000000000..4630e9ea6 --- /dev/null +++ b/source/l/sdl/SDL_mixer.usrlocal.diff @@ -0,0 +1,11 @@ +--- ./timidity/config.h.orig 2010-02-14 17:14:44.000000000 -0600 ++++ ./timidity/config.h 2010-02-14 17:15:45.000000000 -0600 +@@ -179,7 +179,7 @@ + #else + #define DEFAULT_PATH "/etc/timidity" + #define DEFAULT_PATH1 "/usr/share/timidity" +-#define DEFAULT_PATH2 "/usr/local/lib/timidity" ++#define DEFAULT_PATH2 "/usr/lib/timidity" + #endif + + /* These affect general volume */ diff --git a/source/l/sdl/sdl.SlackBuild b/source/l/sdl/sdl.SlackBuild index 0c351f8df..044c1f85f 100755 --- a/source/l/sdl/sdl.SlackBuild +++ b/source/l/sdl/sdl.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -20,14 +20,23 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -VERSION=1.2.13 -IMAGE=1.2.7 -MIXER=1.2.8 -NET=1.2.7 -TTF=2.0.9 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-4} +VERSION=${VERSION:-$(echo SDL-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +IMAGE=${IMAGE:-$(echo SDL_image-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +MIXER=${MIXER:-$(echo SDL_mixer-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +NET=${NET:-$(echo SDL_net-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +TTF=${TTF:-$(echo SDL_ttf-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} + +BUILD=${BUILD:-2} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi NUMJOBS=${NUMJOBS:-" -j7 "} @@ -40,6 +49,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -50,7 +62,7 @@ rm -rf $PKG mkdir -p $TMP $PKG cd $TMP rm -rf sdl-$VERSION -tar xjf $CWD/SDL-$VERSION.tar.bz2 || exit 1 +tar xf $CWD/SDL-$VERSION.tar.?z* || exit 1 cd SDL-$VERSION chown -R root:root . find . \ @@ -92,7 +104,7 @@ cat $CWD/slack-desc > $PKG/install/slack-desc # Add SDL_image: cd $TMP rm -rf SDL_image-$IMAGE -tar xjf $CWD/SDL_image-$IMAGE.tar.bz2 || exit 1 +tar xf $CWD/SDL_image-$IMAGE.tar.?z* || exit 1 cd SDL_image-$IMAGE chown -R root:root . find . \ @@ -123,11 +135,24 @@ cp -a \ # Add SDL_mixer: cd $TMP rm -rf SDL_mixer-$MIXER -tar xjf $CWD/SDL_mixer-$MIXER.tar.bz2 || exit 1 +tar xf $CWD/SDL_mixer-$MIXER.tar.?z* || exit 1 cd SDL_mixer-$MIXER # Don't look for things in /usr/local, since this is an installed package: -zcat $CWD/SDL_mixer-1.2.8.usrlocal.diff.gz | patch -p1 --verbose || exit 1 +zcat $CWD/SDL_mixer.usrlocal.diff.gz | patch -p1 --verbose || exit 1 + +# Install patched static libmikmod: +unzip libmikmod-3.1.12.zip +( cd libmikmod-3.1.12.patched + ./configure \ + --prefix=/usr/local \ + --libdir=/usr/local/lib${LIBDIRSUFFIX} \ + --with-pic \ + --enable-shared=no \ + --enable-static=yes + make $NUMJOBS || make || exit 1 + make install +) chown -R root:root . find . \ @@ -141,6 +166,7 @@ CFLAGS="$SLKCFLAGS" \ --prefix=/usr \ --libdir=/usr/lib${LIBDIRSUFFIX} \ --mandir=/usr/man \ + --enable-music-mod \ --enable-shared=yes \ --enable-static=no @@ -155,7 +181,7 @@ cp -a \ # Add SDL_net: cd $TMP rm -rf SDL_net-$NET -tar xjf $CWD/SDL_net-$NET.tar.bz2 || exit 1 +tar xf $CWD/SDL_net-$NET.tar.?z* || exit 1 cd SDL_net-$NET chown -R root:root . find . \ @@ -183,7 +209,7 @@ cp -a \ # Add SDL_ttf: cd $TMP rm -rf SDL_ttf-$TTF -tar xjf $CWD/SDL_ttf-$TTF.tar.bz2 || exit 1 +tar xf $CWD/SDL_ttf-$TTF.tar.?z* || exit 1 cd SDL_ttf-$TTF #zcat $CWD/SDL_ttf-2.0.8-noftinternals.diff.gz | patch -p1 --verbose || exit 1 diff --git a/source/l/shared-desktop-ontologies/shared-desktop-ontologies.SlackBuild b/source/l/shared-desktop-ontologies/shared-desktop-ontologies.SlackBuild new file mode 100755 index 000000000..602012b0f --- /dev/null +++ b/source/l/shared-desktop-ontologies/shared-desktop-ontologies.SlackBuild @@ -0,0 +1,107 @@ +#!/bin/sh + +# Copyright 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + +VERSION=${VERSION:-0.3} +BUILD=${BUILD:-1} +NUMJOBS=${NUMJOBS:--j6} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-shared-desktop-ontologies + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "s390" ]; then + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + +rm -rf $PKG +mkdir -p $TMP $PKG +cd $TMP +rm -rf shared-desktop-ontologies-$VERSION +tar xvf $CWD/shared-desktop-ontologies-$VERSION.tar.?z* || exit 1 +cd shared-desktop-ontologies-$VERSION || exit 1 +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +mkdir -p build +cd build + QTDIR=/usr/lib${LIBDIRSUFFIX}/qt \ + PATH=$QTDIR/bin:$PATH \ + cmake \ + $KDE_OPT_ARGS \ + -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ + -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ + -DCMAKE_INSTALL_PREFIX=/usr \ + -DMAN_INSTALL_DIR=/usr/man \ + -DSYSCONF_INSTALL_DIR=/etc \ + -DLIB_SUFFIX=${LIBDIRSUFFIX} \ + .. + make $NUMJOBS || make || exit 1 + make install DESTDIR=$PKG || exit 1 +cd - + +find $PKG | xargs file | grep -e "executable" -e "shared object" \ + | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + +mkdir -p $PKG/usr/doc/shared-desktop-ontologies-$VERSION +cp -a \ + AUTHORS LICENSE* README \ + $PKG/usr/doc/shared-desktop-ontologies-$VERSION + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc + +cd $PKG +/sbin/makepkg -l y -c n $TMP/shared-desktop-ontologies-$VERSION-$ARCH-$BUILD.txz + diff --git a/source/l/shared-desktop-ontologies/slack-desc b/source/l/shared-desktop-ontologies/slack-desc new file mode 100644 index 000000000..8057846b4 --- /dev/null +++ b/source/l/shared-desktop-ontologies/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler-------------------------------------------------------| +shared-desktop-ontologies: shared-desktop-ontologies (Shared OSCAF desktop ontologies) +shared-desktop-ontologies: +shared-desktop-ontologies: The shared-desktop-ontologies package brings the semantic web to +shared-desktop-ontologies: the desktop in terms of vocabulary. It contains the well known core +shared-desktop-ontologies: ontologies such as RDF and RDFS as well as the Nepomuk ontologies +shared-desktop-ontologies: which are used by projects like KDE or Strigi. +shared-desktop-ontologies: +shared-desktop-ontologies: +shared-desktop-ontologies: +shared-desktop-ontologies: Homepage: http://oscaf.sourceforge.net +shared-desktop-ontologies: diff --git a/source/l/shared-mime-info/doinst.sh b/source/l/shared-mime-info/doinst.sh index bce08d419..387262254 100644 --- a/source/l/shared-mime-info/doinst.sh +++ b/source/l/shared-mime-info/doinst.sh @@ -1,4 +1,19 @@ +#!/bin/sh if [ -x /usr/bin/update-mime-database ]; then - chroot . /usr/bin/update-mime-database /usr/share/mime 1>/dev/null 2>/dev/null + /usr/bin/update-mime-database /usr/share/mime 1>/dev/null 2>/dev/null + cat /etc/passwd | while read passwdline ; do + homedir=$(echo $passwdline | cut -f 6 -d :) + if [ -d $homedir/.local/share/mime ]; then + username=$(echo $passwdline | cut -f 1 -d :) + # Sorry about the long command line, alienBOB ;-) + su $username -c "/usr/bin/update-mime-database $homemimedir 1>/dev/null 2>/dev/null" 2> /dev/null + fi + done + # This is just "cleanup" in case something might be missed in /home/*/ + for homemimedir in /home/*/.local/share/mime ; do + if [ -d $homemimedir ]; then + username=$(echo $homemimedir | cut -f 3 -d /) + su $username -c "/usr/bin/update-mime-database $homemimedir 1>/dev/null 2>/dev/null" 2> /dev/null + fi + done fi - diff --git a/source/l/shared-mime-info/shared-mime-info.SlackBuild b/source/l/shared-mime-info/shared-mime-info.SlackBuild index 999527358..81d5f01ba 100755 --- a/source/l/shared-mime-info/shared-mime-info.SlackBuild +++ b/source/l/shared-mime-info/shared-mime-info.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,12 +21,22 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=${VERSION:-0.60} -ARCH=${ARCH:-x86_64} +PKGNAM=shared-mime-info +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:-" -j7 "} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" @@ -36,19 +46,22 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-shared-mime-info +PKG=$TMP/package-${PKGNAM} rm -rf $PKG mkdir -p $TMP $PKG cd $TMP -rm -rf shared-mime-info-$VERSION -tar xvf $CWD/shared-mime-info-$VERSION.tar.bz2 || exit 1 -cd shared-mime-info-$VERSION || exit 1 +rm -rf ${PKGNAM}-$VERSION +tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1 +cd ${PKGNAM}-$VERSION || exit 1 chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -60,7 +73,7 @@ CFLAGS="$SLKCFLAGS" \ ./configure \ --prefix=/usr \ --mandir=/usr/man \ - --docdir=/usr/doc/shared-mime-info-$VERSION \ + --docdir=/usr/doc/${PKGNAM}-$VERSION \ --disable-update-mimedb \ --build=$ARCH-slackware-linux @@ -85,16 +98,24 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ for i in $(find . -type l) ; do ln -s $(readlink $i).gz $i.gz ; rm $i ; done ) -mkdir -p $PKG/usr/doc/shared-mime-info-$VERSION +mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION cp -a \ COPYING* HACKING NEWS README* \ - $PKG/usr/doc/shared-mime-info-$VERSION -chmod 644 $PKG/usr/doc/shared-mime-info-$VERSION/* + $PKG/usr/doc/${PKGNAM}-$VERSION +chmod 644 $PKG/usr/doc/${PKGNAM}-$VERSION/* + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh cd $PKG -/sbin/makepkg -l y -c n $TMP/shared-mime-info-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz diff --git a/source/l/sip/sip.SlackBuild b/source/l/sip/sip.SlackBuild index 0379743a2..e46740e49 100755 --- a/source/l/sip/sip.SlackBuild +++ b/source/l/sip/sip.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh # Copyright 2008 Aleksandar Samardzic <asamardzic@gmail.com> -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -24,21 +24,31 @@ # Modified by Robby Workman <rworkman@slackware.com> -VERSION=${VERSION:-4.7.9} -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +VERSION=${VERSION:-4.10.2} +BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:--j6} CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-sip +# Automatically determine architecture for build & packaging: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" elif [ "$ARCH" = "i686" ]; then SLKCFLAGS="-O2 -march=i686 -mtune=i686" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" +else + SLKCFLAGS="-O2" fi PYTHONVER=$(python -V 2>&1 | cut -f 2 -d' ' | cut -f 1-2 -d.) @@ -48,7 +58,7 @@ rm -rf $PKG mkdir -p $TMP $PKG $OUTPUT cd $TMP rm -rf sip-$VERSION -tar xvf $CWD/sip-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/sip-$VERSION.tar.?z* || exit 1 cd sip-$VERSION || exit 1 chown -R root:root . find . \ @@ -80,5 +90,5 @@ mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -/sbin/makepkg -l y -c n $TMP/sip-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/sip-$(echo $VERSION |tr - _)-$ARCH-$BUILD.txz diff --git a/source/l/sip/sip.info b/source/l/sip/sip.info index 5198037eb..034776a0b 100644 --- a/source/l/sip/sip.info +++ b/source/l/sip/sip.info @@ -1,2 +1,2 @@ HOMEPAGE="http://www.riverbankcomputing.co.uk/software/sip/" -DOWNLOAD="http://www.riverbankcomputing.co.uk/static/Downloads/sip4/sip-4.7.6.tar.gz" +DOWNLOAD="http://www.riverbankcomputing.co.uk/static/Downloads/sip4/sip-4.8.2.tar.gz" diff --git a/source/l/sip/slack-desc b/source/l/sip/slack-desc index d2fae243e..01147eeaf 100644 --- a/source/l/sip/slack-desc +++ b/source/l/sip/slack-desc @@ -13,7 +13,7 @@ sip: C and C++ libraries. It was originally developed to create PyQt, sip: the Python bindings for the Qt toolkit, but can be used to create sip: bindings for any C or C++ library. sip: -sip: Homepage: http://www.riverbankcomputing.co.uk/software/sip/ sip: sip: +sip: Homepage: http://www.riverbankcomputing.co.uk/software/sip/ sip: diff --git a/source/l/slang/slang.SlackBuild b/source/l/slang/slang.SlackBuild index 17a4f14a9..115e24af0 100755 --- a/source/l/slang/slang.SlackBuild +++ b/source/l/slang/slang.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,11 +21,20 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=${VERSION:-2.1.4} -#DOCV=${DOCV:-2.0.4} -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-2.2.2} +#DOCV=${DOCV:-2.2.2} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + NUMJOBS=${NUMJOBS:-" -j7 "} if [ "$ARCH" = "i486" ]; then @@ -37,6 +46,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) diff --git a/source/l/soprano/slack-desc b/source/l/soprano/slack-desc index 387be5795..1cb3f2f8c 100644 --- a/source/l/soprano/slack-desc +++ b/source/l/soprano/slack-desc @@ -13,7 +13,7 @@ soprano: a nice Qt interface to RDF storage solutions. It has a modular soprano: structure which allows to replace the actual RDF storage soprano: implementation used. soprano: -soprano: Homepage: http://soprano.sourceforge.net/ soprano: soprano: +soprano: Homepage: http://soprano.sourceforge.net/ soprano: diff --git a/source/l/soprano/soprano.SlackBuild b/source/l/soprano/soprano.SlackBuild index dafbb7683..3fbdc8fc5 100755 --- a/source/l/soprano/soprano.SlackBuild +++ b/source/l/soprano/soprano.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh # Copyright 2007-2008 Robby Workman, Northport, Alabama, USA -# Copyright 2008-2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # Redistribution and use of this script, with or without modification, is @@ -22,12 +22,20 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=2.2.3 -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-2.4.3} BUILD=${BUILD:-1} - NUMJOBS=${NUMJOBS:--j6} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-soprano @@ -41,6 +49,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG @@ -61,7 +72,6 @@ cd build QTDIR=/usr/lib${LIBDIRSUFFIX}/qt \ PATH=$QTDIR/bin:$PATH \ cmake \ - -DCMAKE_BUILD_TYPE=Release \ -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_INSTALL_PREFIX=/usr \ diff --git a/source/l/soprano/soprano.info b/source/l/soprano/soprano.info deleted file mode 100644 index e66984fa5..000000000 --- a/source/l/soprano/soprano.info +++ /dev/null @@ -1 +0,0 @@ -HOMEPAGE="http://soprano.sourceforge.net/" diff --git a/source/l/startup-notification/startup-notification.SlackBuild b/source/l/startup-notification/startup-notification.SlackBuild index c4135c124..c247069fa 100755 --- a/source/l/startup-notification/startup-notification.SlackBuild +++ b/source/l/startup-notification/startup-notification.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,16 +21,23 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=0.9 -ARCH=${ARCH:-x86_64} -BUILD=${BUILD:-2} +VERSION=${VERSION:-$(echo startup-notification-*.tar.?z* | cut -d - -f 3 | rev | cut -f 3- -d . | rev)} +BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:-" -j7 "} -if [ "$ARCH" = "i386" ]; then - SLKCFLAGS="-O2 -march=i386 -mcpu=i686" - LIBDIRSUFFIX="" -elif [ "$ARCH" = "i486" ]; then +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + + +if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" elif [ "$ARCH" = "s390" ]; then @@ -39,14 +46,17 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-startup-notification + rm -rf $PKG mkdir -p $TMP $PKG - cd $TMP rm -rf startup-notification-$VERSION tar xvf $CWD/startup-notification-$VERSION.tar.bz2 || exit 1 @@ -64,6 +74,7 @@ CFLAGS="$SLKCFLAGS" \ --libdir=/usr/lib${LIBDIRSUFFIX} \ --sysconfdir=/etc \ --localstatedir=/var/lib \ + --disable-static \ --build=$ARCH-slackware-linux make $NUMJOBS || make || exit 1 diff --git a/source/l/strigi/strigi.SlackBuild b/source/l/strigi/strigi.SlackBuild index 2a9dcb4ae..3a0ce7228 100755 --- a/source/l/strigi/strigi.SlackBuild +++ b/source/l/strigi/strigi.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh # Copyright 2007-2008 Robby Workman, Northport, Alabama, USA -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # Redistribution and use of this script, with or without modification, is @@ -22,11 +22,21 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=0.6.4 -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-$(echo strigi-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} + NUMJOBS=${NUMJOBS:--j6} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-strigi @@ -40,13 +50,16 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi rm -rf $PKG mkdir -p $TMP $PKG cd $TMP rm -rf strigi-$VERSION -tar xvf $CWD/strigi-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/strigi-$VERSION.tar.?z* || exit 1 cd strigi-$VERSION || exit 1 chown -R root:root . find . \ @@ -78,9 +91,17 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" \ mkdir -p $PKG/usr/doc/strigi-$VERSION cp -a \ - AUTHORS COPYING ChangeLog NEWS README TODO \ + AUTHORS COPYING NEWS README TODO \ $PKG/usr/doc/strigi-$VERSION +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/l/system-config-printer/doinst.sh b/source/l/system-config-printer/doinst.sh new file mode 100644 index 000000000..214038e76 --- /dev/null +++ b/source/l/system-config-printer/doinst.sh @@ -0,0 +1,21 @@ +config() { + NEW="$1" + OLD="$(dirname $NEW)/$(basename $NEW .new)" + # If there's no config file by that name, mv it over: + if [ ! -r $OLD ]; then + mv $NEW $OLD + elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then + # toss the redundant copy + rm $NEW + fi + # Otherwise, we leave the .new copy for the admin to consider... +} + +config etc/dbus-1/system.d/newprinternotification.conf.new +config etc/dbus-1/system.d/printerdriversinstaller.conf.new + +# Update the desktop database: +if [ -x usr/bin/update-desktop-database ]; then + chroot . /usr/bin/update-desktop-database usr/share/applications > /dev/null 2>&1 +fi + diff --git a/source/l/system-config-printer/slack-desc b/source/l/system-config-printer/slack-desc new file mode 100644 index 000000000..fea4646e9 --- /dev/null +++ b/source/l/system-config-printer/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler------------------------------------------------------| +system-config-printer: system-config-printer (CUPS printer administration tool) +system-config-printer: +system-config-printer: The purpose of the tool is to configure a CUPS server (often the local +system-config-printer: machine) using the CUPS API. The tool is written in Python, using +system-config-printer: pygtk for the graphical parts and Python bindings (pycups) for the +system-config-printer: CUPS API. It is largely the same as using the CUPS web interface for +system-config-printer: configuring printers, but has the advantage of being a native +system-config-printer: application rather than a web page. +system-config-printer: +system-config-printer: Home: http://cyberelk.net/tim/software/system-config-printer/ +system-config-printer: diff --git a/source/l/system-config-printer/system-config-printer.SlackBuild b/source/l/system-config-printer/system-config-printer.SlackBuild new file mode 100755 index 000000000..17bc73274 --- /dev/null +++ b/source/l/system-config-printer/system-config-printer.SlackBuild @@ -0,0 +1,128 @@ +#!/bin/sh + +# Copyright 2010 Eric Hameleers, Eindhoven, NL +# Copyright 2010 Patrick J. Volkerding, Sebeka, MN, USA +# All rights reserved. +# +# Permission to use, copy, modify, and distribute this software for +# any purpose with or without fee is hereby granted, provided that +# the above copyright notice and this permission notice appear in all +# copies. +# +# THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +# IN NO EVENT SHALL THE AUTHORS AND COPYRIGHT HOLDERS AND THEIR +# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF +# USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND +# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +# OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT +# OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF +# SUCH DAMAGE. +# ----------------------------------------------------------------------------- + +# Set initial variables: + +PKGNAM=system-config-printer +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} +NUMJOBS=${NUMJOBS:" -j4 "} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-$PKGNAM + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "i686" ]; then + SLKCFLAGS="-O2 -march=i686 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + +rm -rf $PKG +mkdir -p $TMP $PKG +cd $TMP +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.xz || exit 1 +cd $PKGNAM-$VERSION || exit 1 + +# Make sure ownerships and permissions are sane: +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +# Configure: +LDFLAGS="$SLKLDFLAGS" \ +CXXFLAGS="$SLKCFLAGS" \ +CFLAGS="$SLKCFLAGS" \ +./configure \ + --prefix=/usr \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --mandir=/usr/man \ + --docdir=/usr/doc/$PKGNAM-$VERSION \ + --localstatedir=/var/lib \ + --sysconfdir=/etc \ + --with-udev-rules \ + --program-prefix= \ + --program-suffix= \ + --build=$ARCH-slackware-linux + +# Build and install: +make $NUMJOBS || make || exit 1 +make install DESTDIR=$PKG + +# Slackware does not use PAM. Instead, your user must be in group 'lp'. +sed -i -e 's/at_console="true"/group="lp"/g' \ + $PKG/etc/dbus-1/system.d/newprinternotification.conf + +# Don't clobber the configuration file: +mv $PKG/etc/dbus-1/system.d/newprinternotification.conf{,.new} +mv $PKG/etc/dbus-1/system.d/printerdriversinstaller.conf{,.new} + +# Add documentation: +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION +cp -a \ + AUTHORS COPYING README \ + $PKG/usr/doc/$PKGNAM-$VERSION + +# Compress the man page(s): +if [ -d $PKG/usr/man ]; then + find $PKG/usr/man -type f -name "*.?" -exec gzip -9f {} \; + for i in $(find $PKG/usr/man -type l -name "*.?") ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done +fi + +# Strip binaries (if any): +find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ + | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + +# Add a package description: +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc +zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh + +# Build the package: +cd $PKG +/sbin/makepkg -l y -c n $TMP/${PKGNAM}-${VERSION}-${ARCH}-${BUILD}.txz + diff --git a/source/l/taglib-extras/taglib-extras.SlackBuild b/source/l/taglib-extras/taglib-extras.SlackBuild index 307409f3f..8004a3aad 100755 --- a/source/l/taglib-extras/taglib-extras.SlackBuild +++ b/source/l/taglib-extras/taglib-extras.SlackBuild @@ -21,7 +21,7 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=${VERSION:-0.1.3} +VERSION=${VERSION:-1.0.1} ARCH=${ARCH:-x86_64} BUILD=${BUILD:-1} @@ -53,7 +53,7 @@ mkdir -p $TMP $PKG cd $TMP rm -rf taglib-extras tar xvf $CWD/taglib-extras-$VERSION.tar.?z* || exit 1 -cd taglib-extras || exit 1 +cd taglib-extras-${VERSION} || exit 1 chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ diff --git a/source/l/taglib/taglib.SlackBuild b/source/l/taglib/taglib.SlackBuild index 9aa57b146..b330f32b6 100755 --- a/source/l/taglib/taglib.SlackBuild +++ b/source/l/taglib/taglib.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,10 +21,19 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=1.5 -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-$(echo taglib-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + NUMJOBS=${NUMJOBS:-" -j7 "} if [ "$ARCH" = "i486" ]; then @@ -36,6 +45,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -46,7 +58,7 @@ rm -rf $PKG mkdir -p $TMP $PKG cd $TMP rm -rf taglib-$VERSION -tar xvf $CWD/taglib-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/taglib-$VERSION.tar.?z* || exit 1 cd taglib-$VERSION chown -R root:root . find . \ @@ -60,6 +72,8 @@ CXXFLAGS="$SLKCFLAGS" \ ./configure \ --prefix=/usr \ --libdir=/usr/lib${LIBDIRSUFFIX} \ + --enable-mp4 \ + --enable-asf \ --program-prefix="" \ --program-suffix="" \ --build=$ARCH-slackware-linux @@ -72,7 +86,7 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ mkdir -p $PKG/usr/doc/taglib-$VERSION cp -a \ - AUTHORS COPYING INSTALL README TODO \ + AUTHORS COPYING* INSTALL README TODO \ $PKG/usr/doc/taglib-$VERSION mkdir -p $PKG/install diff --git a/source/l/urwid/urwid.SlackBuild b/source/l/urwid/urwid.SlackBuild index 976a39836..b34a618a6 100755 --- a/source/l/urwid/urwid.SlackBuild +++ b/source/l/urwid/urwid.SlackBuild @@ -25,10 +25,19 @@ # Modified by Robby Workman <rworkman@slackware.com> PRGNAM=urwid -VERSION=0.9.8.4 -ARCH=${ARCH:-x86_64} # This should match the python package +VERSION=0.9.9.1 BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-$PRGNAM @@ -36,7 +45,7 @@ PKG=$TMP/package-$PRGNAM rm -rf $PKG $TMP/$PRGNAM-$VERSION mkdir -p $TMP $PKG cd $TMP || exit 1 -tar xvf $CWD/$PRGNAM-$VERSION.tar.gz +tar xvf $CWD/$PRGNAM-$VERSION.tar.?z cd $PRGNAM-$VERSION || exit 1 chown -R root.root . find . \ diff --git a/source/l/v4l-utils/slack-desc b/source/l/v4l-utils/slack-desc new file mode 100644 index 000000000..574911598 --- /dev/null +++ b/source/l/v4l-utils/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler-----------------------------------------------------| +v4l-utils: v4l-utils (libraries and utilities for video4linux) +v4l-utils: +v4l-utils: libv4l is a collection of libraries which adds a thin abstraction +v4l-utils: layer on top of video4linux2 devices. The purpose of this (thin) +v4l-utils: layer is to make it easy for application writers to support a wide +v4l-utils: variety of devices without having to write seperate code for +v4l-utils: different devices in the same class. Linux V4L2 and DVB API +v4l-utils: utilities are also included. +v4l-utils: +v4l-utils: Homepage: http://freshmeat.net/projects/libv4l +v4l-utils: diff --git a/source/l/v4l-utils/v4l-utils.SlackBuild b/source/l/v4l-utils/v4l-utils.SlackBuild new file mode 100755 index 000000000..5b96939c1 --- /dev/null +++ b/source/l/v4l-utils/v4l-utils.SlackBuild @@ -0,0 +1,97 @@ +#!/bin/sh + +# Copyright 2009 Eric Hameleers, Eindhoven, NL +# Copyright 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA +# All rights reserved. + +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + +PKGNAM=v4l-utils +VERSION=0.8.0 +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +NUMJOBS=${NUMJOBS:--j6} +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-$PKGNAM + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "s390" ]; then + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + +rm -rf $PKG +mkdir -p $TMP $PKG +cd $TMP +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1 +cd $PKGNAM-$VERSION || exit 1 + +# Make sure ownerships and permissions are sane: +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +# Build and install: +export CFLAGS="$SLKCFLAGS" +export CPPFLAGS="$SLKCFLAGS" +export LDFLAGS="$SLKLDFLAGS" +make ${NUMJOBS} PREFIX=/usr LIBDIR=/usr/lib${LIBDIRSUFFIX} || \ + make PREFIX=/usr LIBDIR=/usr/lib${LIBDIRSUFFIX} || \ + exit 1 +make install PREFIX=/usr LIBDIR=/usr/lib${LIBDIRSUFFIX} DESTDIR=$PKG || exit 1 + +# Strip binaries: +find $PKG | xargs file | grep -e "executable" -e "shared object" \ + | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + +# Add a documentation directory: +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION +cp -a \ + COPYING* ChangeLog README* TODO \ + $PKG/usr/doc/$PKGNAM-$VERSION + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc + +cd $PKG +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz + diff --git a/source/l/virtuoso-ose/doinst.sh b/source/l/virtuoso-ose/doinst.sh new file mode 100644 index 000000000..beafd37c5 --- /dev/null +++ b/source/l/virtuoso-ose/doinst.sh @@ -0,0 +1,15 @@ +config() { + NEW="$1" + OLD="$(dirname $NEW)/$(basename $NEW .new)" + # If there's no config file by that name, mv it over: + if [ ! -r $OLD ]; then + mv $NEW $OLD + elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then + # toss the redundant copy + rm $NEW + fi + # Otherwise, we leave the .new copy for the admin to consider... +} + +config etc/virtuoso.ini.new + diff --git a/source/l/virtuoso-ose/slack-desc b/source/l/virtuoso-ose/slack-desc new file mode 100644 index 000000000..dd37d0c20 --- /dev/null +++ b/source/l/virtuoso-ose/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler-----------------------------------------------------| +virtuoso-ose: virtuoso-ose (A high-performance object-relational SQL database) +virtuoso-ose: +virtuoso-ose: Virtuoso is a scalable cross-platform server that combines +virtuoso-ose: SQL/RDF/XML Data Management with Web Application Server +virtuoso-ose: and Web Services Platform functionality. +virtuoso-ose: +virtuoso-ose: +virtuoso-ose: +virtuoso-ose: +virtuoso-ose: Homepage: http://virtuoso.openlinksw.com/wiki/main/ +virtuoso-ose: diff --git a/source/l/virtuoso-ose/virtuoso-ose.SlackBuild b/source/l/virtuoso-ose/virtuoso-ose.SlackBuild new file mode 100755 index 000000000..1507719b7 --- /dev/null +++ b/source/l/virtuoso-ose/virtuoso-ose.SlackBuild @@ -0,0 +1,115 @@ +#!/bin/sh + +# Copyright 2009, 2010 Eric Hameleers, Eindhoven, NL +# Copyright 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA +# All rights reserved. + +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + +VERSION=${VERSION:-6.1.1} +BUILD=${BUILD:-1} +NUMJOBS=${NUMJOBS:--j6} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-virtuoso-ose + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "s390" ]; then + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + +rm -rf $PKG +mkdir -p $TMP $PKG +cd $TMP +rm -rf virtuoso-opensource-$VERSION +tar xvf $CWD/virtuoso-opensource-$VERSION.tar.xz || exit 1 +cd virtuoso-opensource-$VERSION || exit 1 +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +# Configure: +# We disable building of all VADs because Slackware's version of Virtuoso is +# only used as backend for the Soprano/Nepomuk desktop search. +# This saves us a lot of megabytes. +CFLAGS="$SLKCFLAGS" \ +CXXFLAGS="$SLKCFLAGS" \ +LDFLAGS="-L/usr/lib${LIBDIRSUFFIX}" \ +./configure \ + --prefix=/usr \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --sysconfdir=/etc \ + --localstatedir=/var \ + --mandir=/usr/man \ + --docdir=/usr/doc/virtuoso-ose-$VERSION \ + --with-pthreads \ + --enable-aio \ + --disable-static \ + --disable-all-vads \ + --program-prefix= \ + --program-suffix= \ + --build=$ARCH-slackware-linux + +# Build and install: +make $NUMJOBS || make || exit 1 +make install DESTDIR=$PKG || exit 1 + +# Do not clobber an existing .ini file: +mkdir -p $PKG/etc +mv $PKG/var/lib/virtuoso/db/virtuoso.ini $PKG/etc/virtuoso.ini.new +ln -sf /etc/virtuoso.ini $PKG/var/lib/virtuoso/db/ + +find $PKG | xargs file | grep -e "executable" -e "shared object" \ + | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + +mkdir -p $PKG/usr/doc/virtuoso-ose-$VERSION +cp -a \ + AUTHORS COPYING CREDITS LICENSE NEWS README* \ + $PKG/usr/doc/virtuoso-ose-$VERSION + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc +zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh + +cd $PKG +/sbin/makepkg -l y -c n $TMP/virtuoso-ose-$VERSION-$ARCH-$BUILD.txz + diff --git a/source/l/vte/vte.SlackBuild b/source/l/vte/vte.SlackBuild index db58daa35..d9aa44c42 100755 --- a/source/l/vte/vte.SlackBuild +++ b/source/l/vte/vte.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2006, 2007, 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006, 2007, 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -22,12 +22,21 @@ PKGNAM=vte -VERSION=${VERSION:-0.20.5} -ARCH=${ARCH:-x86_64} +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:-" -j7 "} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" LIBDIRSUFFIX="" @@ -37,6 +46,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -107,6 +119,14 @@ cp -a \ $PKG/usr/doc/${PKGNAM}-$VERSION ln -s /usr/share/gtk-doc/html/vte $PKG/usr/doc/vte-$VERSION/html +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/source/l/wv2/wv2.SlackBuild b/source/l/wv2/wv2.SlackBuild index 3b46bde38..79d04b50a 100755 --- a/source/l/wv2/wv2.SlackBuild +++ b/source/l/wv2/wv2.SlackBuild @@ -20,10 +20,19 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -VERSION=0.2.3 -ARCH=${ARCH:-x86_64} +VERSION=0.4.2 BUILD=${BUILD:-1} +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + NUMJOBS=${NUMJOBS:-" -j7 "} if [ "$ARCH" = "i486" ]; then @@ -35,6 +44,9 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" fi CWD=$(pwd) @@ -45,7 +57,7 @@ mkdir -p $TMP $PKG cd $TMP rm -rf wv2-$VERSION -tar xvf $CWD/wv2-$VERSION.tar.bz2 || exit 1 +tar xvf $CWD/wv2-$VERSION.tar.?z* || exit 1 cd wv2-$VERSION chown -R root:root . find . \ @@ -54,19 +66,21 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; -CFLAGS="$SLKCFLAGS" \ -CXXFLAGS="$SLKCFLAGS" \ -./configure \ - --prefix=/usr \ - --libdir=/usr/lib${LIBDIRSUFFIX} \ - --disable-debug \ - --disable-static \ - --program-prefix="" \ - --program-suffix="" \ - $ARCH-slackware-linux - -make $NUMJOBS || make || exit 1 -make install DESTDIR=$PKG || exit 1 +mkdir -p build +cd build + cmake \ + $KDE_OPT_ARGS \ + -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ + -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ + -DCMAKE_BUILD_TYPE=Release \ + -DCMAKE_INSTALL_PREFIX=/usr \ + -DMAN_INSTALL_DIR=/usr/man \ + -DSYSCONF_INSTALL_DIR=/etc \ + -DLIB_SUFFIX=${LIBDIRSUFFIX} \ + .. + make $NUMJOBS || exit 1 + make install DESTDIR=$PKG || exit 1 +cd - find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null |