6 files changed, 318 insertions, 0 deletions
diff --git a/slackware64/l/glib2/doinst.sh b/slackware64/l/glib2/doinst.sh
new file mode 100644
index 000000000..a14f9606c
--- /dev/null
+++ b/slackware64/l/glib2/doinst.sh
@@ -0,0 +1,32 @@
+# Handle the incoming configuration files:
+config() {
+  for infile in $1; do
+    NEW="$infile"
+    OLD="`dirname $NEW`/`basename $NEW .new`"
+    # If there's no config file by that name, mv it over:
+    if [ ! -r $OLD ]; then
+      mv $NEW $OLD
+    elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then
+      # toss the redundant copy
+      rm $NEW
+    fi
+    # Otherwise, we leave the .new copy for the admin to consider...
+  done
+}
+
+# Prepare the new configuration files
+for file in etc/profile.d/libglib2.csh.new etc/profile.d/libglib2.sh.new ; do
+  if test -e $(dirname $file)/$(basename $file .new) ; then
+    if [ ! -x $(dirname $file)/$(basename $file .new) ]; then
+      chmod 644 $file
+     else
+      chmod 755 $file
+    fi
+  fi
+  config $file
+done
+
+# Try to run these.  If they fail, no biggie.
+chroot . /usr/bin/glib-compile-schemas /usr/share/glib-2.0/schemas/ 1> /dev/null 2> /dev/null
+chroot . /usr/bin/gio-querymodules @LIBDIR@/gio/modules/ 1> /dev/null 2> /dev/null
+
diff --git a/slackware64/l/glib2/glib2.SlackBuild b/slackware64/l/glib2/glib2.SlackBuild
new file mode 100755
index 000000000..0c0783edd
--- /dev/null
+++ b/slackware64/l/glib2/glib2.SlackBuild
@@ -0,0 +1,177 @@
+#!/bin/bash
+
+# Copyright 2008, 2009, 2010, 2011, 2015, 2017, 2018  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=glib2
+VERSION=${VERSION:-$(echo glib-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) export ARCH=i586 ;;
+    arm*) export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) export ARCH=$( uname -m ) ;;
+  esac
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-glib2
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG/usr
+cd $TMP
+rm -rf glib-$VERSION
+tar xvf $CWD/glib-$VERSION.tar.?z* || exit 1
+cd glib-$VERSION || exit 1
+
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+# Get the local timezone link from /etc/localtime-copied-from:
+zcat $CWD/glib2.slackware.localtime.diff.gz | patch -p1 --verbose || exit 1
+
+# Configure, build, and install:
+export CFLAGS="$SLKCFLAGS"
+export CXXFLAGS="$SLKCFLAGS"
+mkdir meson-build
+cd meson-build
+meson setup \
+  --prefix=/usr \
+  --libdir=lib${LIBDIRSUFFIX} \
+  --libexecdir=/usr/libexec \
+  --bindir=/usr/bin \
+  --sbindir=/usr/sbin \
+  --includedir=/usr/include \
+  --datadir=/usr/share \
+  --mandir=/usr/man \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --buildtype=release \
+  -Dselinux=disabled \
+  -Dfam=true \
+  -Dman=true \
+  -Dgtk_doc=true \
+  -Dinstalled_tests=false \
+  .. || exit 1
+  "${NINJA:=ninja}" $NUMJOBS || exit 1
+  DESTDIR=$PKG $NINJA install || exit 1
+cd ..
+
+# Don't ship .la files:
+rm -f $PKG/{,usr/}lib${LIBDIRSUFFIX}/*.la
+
+# Since meson isn't listening to options:
+rm -rf $PKG/usr/libexec/installed-tests
+rmdir $PKG/usr/libexec
+
+# Install profile scripts:
+mkdir -p $PKG/etc/profile.d/
+cp -a $CWD/libglib2.{csh,sh} $PKG/etc/profile.d/
+chown root:root $PKG/etc/profile.d/*
+chmod 755 $PKG/etc/profile.d/*
+mv $PKG/etc/profile.d/libglib2.csh $PKG/etc/profile.d/libglib2.csh.new
+mv $PKG/etc/profile.d/libglib2.sh $PKG/etc/profile.d/libglib2.sh.new
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" \
+  | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+mkdir -p $PKG/usr/doc/glib-$VERSION
+cp -a \
+  AUTHORS COPYING* NEWS README* \
+  $PKG/usr/doc/glib-$VERSION
+  rm -f $PKG/usr/doc/glib-$VERSION/README.{in,win32}
+
+# Make links to the documentation in /usr/share/gtk-doc/:
+( cd $PKG/usr/doc/glib-$VERSION
+  for dir in $PKG/usr/share/gtk-doc/html/* ; do
+    ln -s /usr/share/gtk-doc/html/$(basename $dir) .
+  done
+)
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+# Trim down bloated NEWS file:
+if [ -r NEWS ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION)
+  cat NEWS | head -n 1000 > $DOCSDIR/NEWS
+  touch -r NEWS $DOCSDIR/NEWS
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+zcat $CWD/doinst.sh.gz | sed "s,@LIBDIR@,/usr/lib${LIBDIRSUFFIX}," > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n --prepend $TMP/glib2-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/slackware64/l/glib2/glib2.slackware.localtime.diff b/slackware64/l/glib2/glib2.slackware.localtime.diff
new file mode 100644
index 000000000..235632d12
--- /dev/null
+++ b/slackware64/l/glib2/glib2.slackware.localtime.diff
@@ -0,0 +1,37 @@
+From 4ac2d88f3153d8cdaa003601363e71f46820a187 Mon Sep 17 00:00:00 2001
+From: Patrick J. Volkerding <volkerdi@slackware.com>
+Date: Tue, 20 Nov 2018 13:26:57 -0600
+Subject: [PATCH] Also look at /etc/localtime-copied-from
+
+In Slackware, /etc/localtime is a copy of the local timezone file, not a
+symlink to it, but the latest glib expects a symlink (because that's been
+demanded by systemd and guess-who). So, if we find that /etc/localtime is
+not a symlink, consider /etc/localtime-copied-from next. On Slackware
+systems this will be a symlink to the local timezone file under
+/usr/share/zoneinfo. We still want to consider the possibility that
+/etc/localtime *is* a symlink first though, since that's an acceptable
+local system modification on Slackware.
+
+--- ./glib/gtimezone.c.orig	2018-09-21 09:23:53.000000000 -0500
++++ ./glib/gtimezone.c	2018-11-20 13:11:31.601643410 -0600
+@@ -440,6 +440,20 @@
+ 
+       /* Resolve the actual timezone pointed to by /etc/localtime. */
+       resolved_identifier = g_file_read_link (filename, &read_link_err);
++
++      /* If we didn't get the timezone here (probably because
++       * /etc/localtime is not a symlink), then we will try again using
++       * /etc/localtime-copied-from, which on Slackware is a symlink to
++       * the local timezone file. */
++      if (resolved_identifier == NULL)
++        {
++          filename = g_strdup ("/etc/localtime-copied-from");
++          g_clear_error (&read_link_err);
++          resolved_identifier = g_file_read_link (filename, &read_link_err);
++        }
++
++      /* Test that we got the resolved_identifier. If not, fall back on the
++       * last option (/var/db/zoneinfo file, as found on FreeBSD) */
+       if (resolved_identifier == NULL)
+         {
+           gboolean not_a_symlink = g_error_matches (read_link_err,
diff --git a/slackware64/l/glib2/libglib2.csh b/slackware64/l/glib2/libglib2.csh
new file mode 100644
index 000000000..a1b675615
--- /dev/null
+++ b/slackware64/l/glib2/libglib2.csh
@@ -0,0 +1,27 @@
+#!/bin/csh
+#
+# Description:  This script sets the environment variables G_FILENAME_ENCODING
+# and G_BROKEN_FILENAMES for the glib-2.0 library.
+#
+# G_FILENAME_ENCODING
+#       This environment variable can be set to a comma-separated list of
+#       character set names.  GLib assumes that filenames are encoded in the
+#       first character set from that list rather than in UTF-8.  The special
+#       token "@locale" can be used to specify the character set for the
+#       current locale.
+#
+# G_BROKEN_FILENAMES
+#       If this environment variable is set, GLib assumes that filenames are
+#       in the locale encoding rather than in UTF-8.
+
+# If the LANG you have set contains any form of "UTF", we will guess you are
+# using a UTF-8 locale.  Hopefully we're correct.
+echo $LANG | grep -iq UTF
+if ($status == 0) then
+  setenv G_FILENAME_ENCODING "@locale"
+endif
+
+# It doesn't hurt to export this since G_FILENAME_ENCODING takes priority
+# over G_BROKEN_FILENAMES:
+setenv G_BROKEN_FILENAMES 1
+
diff --git a/slackware64/l/glib2/libglib2.sh b/slackware64/l/glib2/libglib2.sh
new file mode 100644
index 000000000..9b9fdc69f
--- /dev/null
+++ b/slackware64/l/glib2/libglib2.sh
@@ -0,0 +1,26 @@
+#!/bin/sh
+#
+# Description:  This script sets the environment variables G_FILENAME_ENCODING
+# and G_BROKEN_FILENAMES for the glib-2.0 library.
+#
+# G_FILENAME_ENCODING
+#       This environment variable can be set to a comma-separated list of
+#       character set names.  GLib assumes that filenames are encoded in the
+#       first character set from that list rather than in UTF-8.  The special
+#       token "@locale" can be used to specify the character set for the
+#       current locale.
+#
+# G_BROKEN_FILENAMES
+#       If this environment variable is set, GLib assumes that filenames are
+#       in the locale encoding rather than in UTF-8.
+
+# If the LANG you have set contains any form of "UTF", we will guess you are
+# using a UTF-8 locale.  Hopefully we're correct.
+if echo $LANG | grep -iq UTF ; then
+  export G_FILENAME_ENCODING="@locale"
+fi
+
+# It doesn't hurt to export this since G_FILENAME_ENCODING takes priority
+# over G_BROKEN_FILENAMES:
+export G_BROKEN_FILENAMES=1
+
diff --git a/slackware64/l/glib2/slack-desc b/slackware64/l/glib2/slack-desc
new file mode 100644
index 000000000..39a8f4377
--- /dev/null
+++ b/slackware64/l/glib2/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in. You must make
+# exactly 11 lines for the formatting to be correct. It's also customary to
+# leave one space after the ':'.
+
+     |-----handy-ruler------------------------------------------------------|
+glib2: glib2 (library of C routines)
+glib2:
+glib2: GLib is the low-level core library that forms the basis for projects
+glib2: such as GTK+ and GNOME. It provides data structure handling for C,
+glib2: portability wrappers, and interfaces for such runtime functionality as
+glib2: an event loop, threads, dynamic loading, and an object system.
+glib2:
+glib2: Homepage: https://www.gtk.org
+glib2:
+glib2:
+glib2: