Slackware 13.0slackware-13.0

Wed Aug 26 10:00:38 CDT 2009
Slackware 13.0 x86_64 is released as stable!  Thanks to everyone who
helped make this release possible -- see the RELEASE_NOTES for the
credits.  The ISOs are off to the replicator.  This time it will be a
6 CD-ROM 32-bit set and a dual-sided 32-bit/64-bit x86/x86_64 DVD.
We're taking pre-orders now at store.slackware.com.  Please consider
picking up a copy to help support the project.  Once again, thanks to
the entire Slackware community for all the help testing and fixing
things and offering suggestions during this development cycle.
As always, have fun and enjoy!  -P.

11 files changed, 457 insertions, 0 deletions

diff --git a/source/n/sendmail/Build b/source/n/sendmail/Build
new file mode 100644
index 000000000..21950d496
--- /dev/null
+++ b/source/n/sendmail/Build
@@ -0,0 +1,29 @@
+#!/bin/sh
+# Copyright 2004 Slackware Linux, Inc.  Concord, CA 94520
+# Copyright 2007, 2008  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+
+# A script to build .cf files from .mc files:
+
+for mcfile in $* ; do
+  /usr/bin/m4 /usr/share/sendmail/cf/m4/cf.m4 $mcfile > $(basename $mcfile .mc).cf
+done
+
diff --git a/source/n/sendmail/SlackBuild b/source/n/sendmail/SlackBuild
new file mode 100755
index 000000000..462f16e9d
--- /dev/null
+++ b/source/n/sendmail/SlackBuild
@@ -0,0 +1,3 @@
+#!/bin/sh
+./SlackBuild-sendmail $*
+./SlackBuild-sendmail-cf $*
diff --git a/source/n/sendmail/SlackBuild-sendmail b/source/n/sendmail/SlackBuild-sendmail
new file mode 100755
index 000000000..54dc0c5c2
--- /dev/null
+++ b/source/n/sendmail/SlackBuild-sendmail
@@ -0,0 +1,156 @@
+#!/bin/sh
+
+# Copyright 2008, 2009  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+VERSION=8.14.3
+ARCH=${ARCH:-x86_64}
+BUILD=${BUILD:-2}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-sendmail
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+# Explode the package framework:
+cd $PKG
+explodepkg $CWD/_sendmail.tar.gz
+[ -n "${LIBDIRSUFFIX}" ] && mv $PKG/usr/lib $PKG/usr/lib${LIBDIRSUFFIX}
+
+echo "+=================+"
+echo "| sendmail.$VERSION |"
+echo "+=================+"
+OSCPU="`uname -srm | tr ' ' '.'`"
+cd $TMP
+rm -rf sendmail-$VERSION
+tar xvf $CWD/sendmail.$VERSION.tar.gz || exit 1
+cd sendmail-$VERSION
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+# Add TLS support to the sendmail binary:
+cat $CWD/site.config.m4 > devtools/Site/site.config.m4
+
+# Build .cf files for Linux:
+cd $TMP/sendmail-$VERSION/cf/cf
+cp $CWD/*.mc .
+cp linux.uucp.mc config.mc
+sh Build config.cf
+mv config.cf $PKG/usr/share/sendmail/linux.uucp.cf
+cp sendmail-slackware.mc config.mc
+sh Build config.cf
+mv config.cf $PKG/usr/share/sendmail/sendmail-slackware.cf
+cp sendmail-slackware-tls.mc config.mc
+sh Build config.cf
+mv config.cf $PKG/usr/share/sendmail/sendmail-slackware-tls.cf
+cp sendmail-slackware-tls-sasl.mc config.mc
+sh Build config.cf
+mv config.cf $PKG/usr/share/sendmail/sendmail-slackware-tls-sasl.cf
+
+# Add a sample sendmail.cf:
+cat $PKG/usr/share/sendmail/sendmail-slackware.cf > $PKG/etc/mail/sendmail.cf.new
+cat submit.cf > $PKG/etc/mail/submit.cf.new
+
+cd $TMP/sendmail-$VERSION
+## All "Build" does is call make while screwing up the options  :-)
+## sh Build
+make O="$SLKCFLAGS"
+#O="$SLKCFLAGS" sh Build
+cat sendmail/mailq.1 | gzip -9c > $PKG/usr/man/man1/mailq.1.gz
+cat sendmail/newaliases.1 | gzip -9c > $PKG/usr/man/man1/newaliases.1.gz
+mkdir -p $PKG/usr/doc/sendmail-$VERSION
+cp -a \
+  FAQ INSTALL KNOWNBUGS LICENSE PGPKEYS README RELEASE_NOTES \
+  $PKG/usr/doc/sendmail-$VERSION
+( cd doc ; cp -a op $PKG/usr/doc/sendmail-$VERSION )
+
+cd obj.$OSCPU/sendmail
+cat sendmail > $PKG/usr/sbin/sendmail.new
+cat aliases.5 | gzip -9c > $PKG/usr/man/man5/aliases.5.gz
+cat sendmail.8 | gzip -9c > $PKG/usr/man/man8/sendmail.8.gz
+cat statistics > $PKG/etc/mail/statistics
+cat ../../sendmail/helpfile > $PKG/etc/mail/helpfile
+cd ../makemap
+cat makemap > $PKG/usr/sbin/makemap
+cat makemap.8 | gzip -9c > $PKG/usr/man/man8/makemap.8.gz
+cd ../mailstats
+cat mailstats > $PKG/usr/sbin/mailstats
+cat mailstats.8 | gzip -9c > $PKG/usr/man/man8/mailstats.8.gz
+cd ../praliases
+cat praliases > $PKG/usr/bin/praliases
+chmod 755 $PKG/usr/bin/praliases
+cat praliases.8 | gzip -9c > $PKG/usr/man/man8/praliases.8.gz
+cd ../rmail
+cat rmail > $PKG/usr/bin/rmail
+cat rmail.8 | gzip -9c > $PKG/usr/man/man8/rmail.8.gz
+cd ../smrsh
+cat smrsh > $PKG/usr/sbin/smrsh
+cat smrsh.8 | gzip -9c > $PKG/usr/man/man8/smrsh.8.gz
+cd ../mail.local
+cat mail.local > $PKG/usr/sbin/mail.local
+cat mail.local.8 | gzip -9c > $PKG/usr/man/man8/mail.local.8.gz
+cd ../vacation
+cat vacation > $PKG/usr/bin/vacation
+cat vacation.1 | gzip -9c > $PKG/usr/man/man1/vacation.1.gz
+cd ../editmap
+cat editmap > $PKG/usr/sbin/editmap
+cat editmap.8 | gzip -9c > $PKG/usr/man/man8/editmap.8.gz
+
+# Add libmilter:
+cd $TMP/sendmail-$VERSION/libmilter
+./Build
+cd ..
+mkdir -p $PKG/usr/include
+mkdir -p $PKG/usr/include/libmilter
+cp -a include/libmilter/mfapi.h $PKG/usr/include/libmilter
+cp -a include/libmilter/mfdef.h $PKG/usr/include/libmilter
+cp -a obj.*/libmilter/libmilter.a $PKG/usr/lib${LIBDIRSUFFIX}
+strip -g $PKG/usr/lib${LIBDIRSUFFIX}/libmilter.a
+chmod 644 $PKG/usr/lib${LIBDIRSUFFIX}/libmilter.a $PKG/usr/include/libmilter/*
+mkdir -p $PKG/usr/doc/sendmail-$VERSION/libmilter
+cp -a libmilter/README $PKG/usr/doc/sendmail-$VERSION/libmilter
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+cat $CWD/slack-desc.sendmail > $PKG/install/slack-desc
+
+# Build the package:
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/sendmail-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/n/sendmail/SlackBuild-sendmail-cf b/source/n/sendmail/SlackBuild-sendmail-cf
new file mode 100755
index 000000000..3d7fd4524
--- /dev/null
+++ b/source/n/sendmail/SlackBuild-sendmail-cf
@@ -0,0 +1,57 @@
+#!/bin/sh
+
+# Copyright 2008, 2009  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+VERSION=8.14.3
+ARCH=noarch
+BUILD=${BUILD:-2}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-sendmail-cf
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+echo "+====================+"
+echo "| sendmail.cf.$VERSION |"
+echo "+====================+"
+( cd $TMP/sendmail-$VERSION ; find . -name "*~" -print -exec rm {} \; )
+cd $PKG
+mkdir -p usr/share/sendmail/cf
+cd usr/share/sendmail/cf
+cp -a $TMP/sendmail-$VERSION/cf/README .
+cp -a $TMP/package-sendmail/usr/share/sendmail/README.linux .
+for dir in cf domain feature hack m4 mailer ostype sh siteconfig ; do
+  cp -a $TMP/sendmail-$VERSION/cf/$dir .
+done
+# Replace the sendmail Build script with a simple (working) one:
+cp -a $PKG/usr/share/sendmail/cf/cf/Build $PKG/usr/share/sendmail/cf/cf/Build.orig
+zcat $CWD/Build.gz > $PKG/usr/share/sendmail/cf/cf/Build
+chown -R root.root *
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc.sendmail-cf > $PKG/install/slack-desc
+
+# Build the package:
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/sendmail-cf-$VERSION-noarch-$BUILD.txz
+
diff --git a/source/n/sendmail/linux.uucp.mc b/source/n/sendmail/linux.uucp.mc
new file mode 100644
index 000000000..ffd242bb0
--- /dev/null
+++ b/source/n/sendmail/linux.uucp.mc
@@ -0,0 +1,8 @@
+include(`../m4/cf.m4')
+VERSIONID(`linux for setup with uucp which uses domain names')dnl
+OSTYPE(linux)
+FEATURE(always_add_domain)dnl
+MAILER(local)dnl
+MAILER(smtp)dnl
+MAILER(uucp)
+define(`SMART_HOST', uucp-dom:otheruucphost)
diff --git a/source/n/sendmail/sendmail-slackware-tls-sasl.mc b/source/n/sendmail/sendmail-slackware-tls-sasl.mc
new file mode 100644
index 000000000..ed5753b43
--- /dev/null
+++ b/source/n/sendmail/sendmail-slackware-tls-sasl.mc
@@ -0,0 +1,61 @@
+dnl# This is the a sendmail .mc file for Slackware with TLS support.
+dnl# To generate the sendmail.cf file from this (perhaps after making
+dnl# some changes), use the m4 files in /usr/share/sendmail/cf like this:
+dnl#
+dnl# cp sendmail-slackware-tls.mc /usr/share/sendmail/cf/config.mc
+dnl# cd /usr/share/sendmail/cf
+dnl# sh Build config.mc
+dnl#
+dnl# You may then install the resulting .cf file:
+dnl# cp config.cf /etc/mail/sendmail.cf
+dnl#
+include(`../m4/cf.m4')
+VERSIONID(`TLS supporting setup for Slackware Linux')dnl
+OSTYPE(`linux')dnl
+dnl#
+dnl# You will need to create the certificates below with OpenSSL first:
+define(`confCACERT_PATH', `/etc/mail/certs/')
+define(`confCACERT', `/etc/mail/certs/CA.cert.pem')
+define(`confSERVER_CERT', `/etc/mail/certs/smtp.cert.pem')
+define(`confSERVER_KEY', `/etc/mail/certs/smtp.key.pem')
+dnl# These settings help protect against people verifying email addresses
+dnl# at your site in order to send you email that you probably don't want:
+define(`confPRIVACY_FLAGS', `authwarnings,novrfy,noexpn,restrictqrun')dnl
+dnl# Uncomment the line below to send outgoing mail through an external server:
+dnl define(`SMART_HOST',`mailserver.example.com')
+dnl# No timeout for ident:
+define(`confTO_IDENT', `0')dnl
+dnl# Enable the line below to use smrsh to restrict what sendmail can run:
+dnl FEATURE(`smrsh',`/usr/sbin/smrsh')dnl
+dnl# See the README in /usr/share/sendmail/cf for a ton of information on
+dnl# how these options work:
+FEATURE(`use_cw_file')dnl
+FEATURE(`use_ct_file')dnl
+FEATURE(`mailertable',`hash -o /etc/mail/mailertable.db')dnl
+FEATURE(`virtusertable',`hash -o /etc/mail/virtusertable.db')dnl
+FEATURE(`access_db', `hash -T<TMPF> /etc/mail/access')dnl
+FEATURE(`blacklist_recipients')dnl
+FEATURE(`local_procmail',`',`procmail -t -Y -a $h -d $u')dnl
+FEATURE(`always_add_domain')dnl
+FEATURE(`redirect')dnl
+FEATURE(`no_default_msa')dnl
+dnl# Turn this feature on if you don't always have DNS, or enjoy junk mail:
+dnl FEATURE(`accept_unresolvable_domains')dnl
+EXPOSED_USER(`root')dnl
+dnl# Also accept mail for localhost.localdomain:
+LOCAL_DOMAIN(`localhost.localdomain')dnl
+MAILER(local)dnl
+MAILER(smtp)dnl
+MAILER(procmail)dnl
+dnl# Allow SASL authentication/relaying:
+define(`confAUTH_OPTIONS', `A p y')dnl
+define(`confAUTH_MECHANISMS', `LOGIN PLAIN DIGEST-MD5 CRAM-MD5')dnl
+TRUST_AUTH_MECH(`LOGIN PLAIN DIGEST-MD5 CRAM-MD5')dnl
+DAEMON_OPTIONS(`Port=smtp, Name=MTA')dnl
+dnl# Daemon options after M= below that might need to be changed are:
+dnl# s (allow SSL, not only TLS)
+dnl# a (require authentication)
+DAEMON_OPTIONS(`Port=smtps, Name=MSA-SSL, M=Esa')dnl
+LOCAL_CONFIG
+dnl# Do not allow the weak SSLv2:
+O CipherList=ALL:!ADH:!NULL:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:-LOW:+SSLv3:+TLSv1:-SSLv2:+EXP:+eNULL
diff --git a/source/n/sendmail/sendmail-slackware-tls.mc b/source/n/sendmail/sendmail-slackware-tls.mc
new file mode 100644
index 000000000..01a66775b
--- /dev/null
+++ b/source/n/sendmail/sendmail-slackware-tls.mc
@@ -0,0 +1,56 @@
+dnl# This is the a sendmail .mc file for Slackware with TLS support.
+dnl# To generate the sendmail.cf file from this (perhaps after making
+dnl# some changes), use the m4 files in /usr/share/sendmail/cf like this:
+dnl#
+dnl# cp sendmail-slackware-tls.mc /usr/share/sendmail/cf/config.mc
+dnl# cd /usr/share/sendmail/cf
+dnl# sh Build config.mc
+dnl#
+dnl# You may then install the resulting .cf file:
+dnl# cp config.cf /etc/mail/sendmail.cf
+dnl#
+include(`../m4/cf.m4')
+VERSIONID(`TLS supporting setup for Slackware Linux')dnl
+OSTYPE(`linux')dnl
+dnl#
+dnl# You will need to create the certificates below with OpenSSL first:
+define(`confCACERT_PATH', `/etc/mail/certs/')
+define(`confCACERT', `/etc/mail/certs/CA.cert.pem')
+define(`confSERVER_CERT', `/etc/mail/certs/smtp.cert.pem')
+define(`confSERVER_KEY', `/etc/mail/certs/smtp.key.pem')
+dnl# These settings help protect against people verifying email addresses
+dnl# at your site in order to send you email that you probably don't want:
+define(`confPRIVACY_FLAGS', `authwarnings,novrfy,noexpn,restrictqrun')dnl
+dnl# Uncomment the line below to send outgoing mail through an external server:
+dnl define(`SMART_HOST',`mailserver.example.com')
+dnl# No timeout for ident:
+define(`confTO_IDENT', `0')dnl
+dnl# Enable the line below to use smrsh to restrict what sendmail can run:
+dnl FEATURE(`smrsh',`/usr/sbin/smrsh')dnl
+dnl# See the README in /usr/share/sendmail/cf for a ton of information on
+dnl# how these options work:
+FEATURE(`use_cw_file')dnl
+FEATURE(`use_ct_file')dnl
+FEATURE(`mailertable',`hash -o /etc/mail/mailertable.db')dnl
+FEATURE(`virtusertable',`hash -o /etc/mail/virtusertable.db')dnl
+FEATURE(`access_db', `hash -T<TMPF> /etc/mail/access')dnl
+FEATURE(`blacklist_recipients')dnl
+FEATURE(`local_procmail',`',`procmail -t -Y -a $h -d $u')dnl
+FEATURE(`always_add_domain')dnl
+FEATURE(`redirect')dnl
+dnl# Turn this feature on if you don't always have DNS, or enjoy junk mail:
+dnl FEATURE(`accept_unresolvable_domains')dnl
+EXPOSED_USER(`root')dnl
+dnl# Also accept mail for localhost.localdomain:
+LOCAL_DOMAIN(`localhost.localdomain')dnl
+MAILER(local)dnl
+MAILER(smtp)dnl
+MAILER(procmail)dnl
+DAEMON_OPTIONS(`Port=smtp, Name=MTA')dnl
+dnl# Daemon options after M= below that might need to be changed are:
+dnl# s (allow SSL, not only TLS)
+dnl# a (require authentication)
+DAEMON_OPTIONS(`Port=smtps, Name=MSA-SSL, M=Es')dnl
+LOCAL_CONFIG
+dnl# Do not allow the weak SSLv2:
+O CipherList=ALL:!ADH:!NULL:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:-LOW:+SSLv3:+TLSv1:-SSLv2:+EXP:+eNULL
diff --git a/source/n/sendmail/sendmail-slackware.mc b/source/n/sendmail/sendmail-slackware.mc
new file mode 100644
index 000000000..4fd4620bf
--- /dev/null
+++ b/source/n/sendmail/sendmail-slackware.mc
@@ -0,0 +1,42 @@
+dnl# This is the default sendmail .mc file for Slackware.  To generate
+dnl# the sendmail.cf file from this (perhaps after making some changes),
+dnl# use the m4 files in /usr/share/sendmail/cf like this:
+dnl#
+dnl# cp sendmail-slackware.mc /usr/share/sendmail/cf/config.mc
+dnl# cd /usr/share/sendmail/cf
+dnl# sh Build config.cf
+dnl#
+dnl# You may then install the resulting .cf file:
+dnl# cp config.cf /etc/mail/sendmail.cf
+dnl#
+include(`../m4/cf.m4')
+VERSIONID(`default setup for Slackware Linux')dnl
+OSTYPE(`linux')dnl
+dnl# These settings help protect against people verifying email addresses
+dnl# at your site in order to send you email that you probably don't want:
+define(`confPRIVACY_FLAGS', `authwarnings,novrfy,noexpn,restrictqrun')dnl
+dnl# Uncomment the line below to send outgoing mail through an external server:
+dnl define(`SMART_HOST',`mailserver.example.com')
+dnl# No timeout for ident:
+define(`confTO_IDENT', `0')dnl
+dnl# Enable the line below to use smrsh to restrict what sendmail can run:
+dnl FEATURE(`smrsh',`/usr/sbin/smrsh')dnl
+dnl# See the README in /usr/share/sendmail/cf for a ton of information on
+dnl# how these options work:
+FEATURE(`use_cw_file')dnl
+FEATURE(`use_ct_file')dnl
+FEATURE(`mailertable',`hash -o /etc/mail/mailertable.db')dnl
+FEATURE(`virtusertable',`hash -o /etc/mail/virtusertable.db')dnl
+FEATURE(`access_db', `hash -T<TMPF> /etc/mail/access')dnl
+FEATURE(`blacklist_recipients')dnl
+FEATURE(`local_procmail',`',`procmail -t -Y -a $h -d $u')dnl
+FEATURE(`always_add_domain')dnl
+FEATURE(`redirect')dnl
+dnl# Turn this feature on if you don't always have DNS, or enjoy junk mail:
+dnl FEATURE(`accept_unresolvable_domains')dnl
+EXPOSED_USER(`root')dnl
+dnl# Also accept mail for localhost.localdomain:
+LOCAL_DOMAIN(`localhost.localdomain')dnl
+MAILER(local)dnl
+MAILER(smtp)dnl
+MAILER(procmail)dnl
diff --git a/source/n/sendmail/site.config.m4 b/source/n/sendmail/site.config.m4
new file mode 100644
index 000000000..1f6c7f87c
--- /dev/null
+++ b/source/n/sendmail/site.config.m4
@@ -0,0 +1,7 @@
+APPENDDEF(`confMAPDEF', `-DNEWDB -DSTARTTLS -DSASL=2 -DTCPWRAPPERS -DNIS -DMAP_REGEX -DSOCKETMAP')
+APPENDDEF(`confLIBS', `-lnsl -lssl -lcrypto -lsasl2 -lwrap -lm -ldb -lresolv')
+APPENDDEF(`conf_libmilter_ENVDEF', `-DMILTER')
+APPENDDEF(`conf_sendmail_ENVDEF', `-DMILTER')
+APPENDDEF(`conf_libmilter_ENVDEF', `-D_FFR_MILTER_ROOT_UNSAFE ')
+APPENDDEF(`confENVDEF', `-DBROKEN_PTHREAD_SLEEP')
+APPENDDEF(`confENVDEF', `-D_FFR_TLS_1')dnl
diff --git a/source/n/sendmail/slack-desc.sendmail b/source/n/sendmail/slack-desc.sendmail
new file mode 100644
index 000000000..cdcc9387a
--- /dev/null
+++ b/source/n/sendmail/slack-desc.sendmail
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+        |-----handy-ruler------------------------------------------------------|
+sendmail: sendmail (mail transfer agent)
+sendmail:
+sendmail: Eric Allman's mail transport agent. The _Unix System Administration
+sendmail: Handbook_ calls sendmail 'The most complex and complete mail delivery
+sendmail: system in common use...'
+sendmail:
+sendmail: Ready-made configuration files are included for systems connected by
+sendmail: TCP/IP (with or without a nameserver) and for systems using UUCP.
+sendmail:
+sendmail: The procmail package is required to handle local mail delivery.
+sendmail:
diff --git a/source/n/sendmail/slack-desc.sendmail-cf b/source/n/sendmail/slack-desc.sendmail-cf
new file mode 100644
index 000000000..df56efdc8
--- /dev/null
+++ b/source/n/sendmail/slack-desc.sendmail-cf
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+           |-----handy-ruler------------------------------------------------------|
+sendmail-cf: sendmail-cf (configuration files for sendmail)
+sendmail-cf:
+sendmail-cf: These files are used to create sendmail.cf configuration files.  The
+sendmail-cf: m4 macro processor is also required in order to make use of these
+sendmail-cf: files. 
+sendmail-cf:
+sendmail-cf: The files and documentation in /usr/share/sendmail should make it
+sendmail-cf: possible to support virtually any mail configuration.  NOTE: You
+sendmail-cf: probably won't need this package if you're planning to use one of the
+sendmail-cf: sendmail.cf samples included in the sendmail package.
+sendmail-cf: