Slackware 13.0slackware-13.0

Wed Aug 26 10:00:38 CDT 2009
Slackware 13.0 x86_64 is released as stable!  Thanks to everyone who
helped make this release possible -- see the RELEASE_NOTES for the
credits.  The ISOs are off to the replicator.  This time it will be a
6 CD-ROM 32-bit set and a dual-sided 32-bit/64-bit x86/x86_64 DVD.
We're taking pre-orders now at store.slackware.com.  Please consider
picking up a copy to help support the project.  Once again, thanks to
the entire Slackware community for all the help testing and fixing
things and offering suggestions during this development cycle.
As always, have fun and enjoy!  -P.

1 files changed, 204 insertions, 0 deletions

diff --git a/source/n/httpd/httpd.SlackBuild b/source/n/httpd/httpd.SlackBuild
new file mode 100755
index 000000000..2cdce1d87
--- /dev/null
+++ b/source/n/httpd/httpd.SlackBuild
@@ -0,0 +1,204 @@
+#!/bin/sh
+
+# Copyright 2006, 2007, 2008, 2009  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+# This script was written using the one from slackbuilds.org as a reference,
+# so thanks to Adis Nezirovic ( adis _at_ linux.org.ba ) for the original work.
+
+
+PKGNAM=httpd
+VERSION=${VERSION:-2.2.13}
+ARCH=${ARCH:-x86_64}
+NUMJOBS=${NUMJOBS:-" -j7 "}
+BUILD=${BUILD:-1}
+
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-${PKGNAM}
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+fi
+
+cd $TMP
+rm -rf ${PKGNAM}-${VERSION}
+tar xvf $CWD/${PKGNAM}-$VERSION.tar.bz2 || exit 1
+cd ${PKGNAM}-$VERSION
+
+# Make sure ownerships and permissions are sane:
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+# "prefork" is the default, safe, mpm type.  If you *are not* using PHP, and you
+# like to live on the bleeding edge, you may wish to change the --with-mpm option
+# to "worker", which is the new way of doing things, but is multithreaded and
+# many scripts (especially PHP ones) are not multithread safe.
+#
+# I'd leave this option the way is it on any production box that's keeping up
+# with HTTP requests.  No reason to chance it, IMHO.
+
+zcat $CWD/config.layout.diff.gz | sed -e "s#lib/httpd#lib${LIBDIRSUFFIX}/httpd#" | patch --verbose -p1 || exit 1
+
+# Configure:
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --enable-layout=Slackware-FHS \
+  --with-mpm=prefork \
+  --with-apr=/usr \
+  --with-apr-util=/usr \
+  --enable-mods-shared=all \
+  --enable-so \
+  --enable-pie \
+  --enable-cgi \
+  --with-pcre \
+  --enable-ssl \
+  --enable-rewrite \
+  --enable-vhost-alias \
+  --enable-proxy \
+  --enable-proxy-http \
+  --enable-proxy-ftp \
+  --enable-proxy-balancer \
+  --enable-cache \
+  --enable-mem-cache \
+  --enable-file-cache \
+  --enable-disk-cache \
+  --disable-speling \
+  --enable-dav \
+  --enable-ldap \
+  --enable-authnz-ldap \
+  --enable-authn-anon \
+  --enable-authn-alias \
+  --build=$ARCH-slackware-linux || exit 1
+
+# Build and install:
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+rmdir $PKG/usr/bin
+
+# Tweak default apache configuration
+( cd $PKG
+  zcat $CWD/httpd.nossldefault.diff.gz | sed -e "s#lib/httpd#lib${LIBDIRSUFFIX}/httpd#" | patch -p1 --verbose || exit 1
+  zcat $CWD/httpd.runasapache.diff.gz | patch -p1 --verbose || exit 1
+  rm -f $PKG/etc/httpd/httpd.conf~
+) || exit 1
+# Change config files to .new:
+( cd $PKG/etc/httpd
+  mv httpd.conf httpd.conf.new
+  for file in extra/*; do
+    mv $file "${file}.new"
+  done
+)
+
+cat << EOF >> $PKG/etc/httpd/httpd.conf.new
+
+# Uncomment the following line to enable PHP:
+#
+#Include /etc/httpd/mod_php.conf
+
+# Uncomment the following lines to enable svn support:
+#
+#LoadModule dav_svn_module lib${LIBDIRSUFFIX}/httpd/modules/mod_dav_svn.so
+#LoadModule authz_svn_module lib${LIBDIRSUFFIX}/httpd/modules/mod_authz_svn.so
+
+EOF
+
+rmdir $PKG/var/log/httpd
+
+mkdir -p $PKG/etc/rc.d
+cat $CWD/rc.httpd > $PKG/etc/rc.d/rc.httpd.new
+
+mkdir -p $PKG/etc/logrotate.d
+cat $CWD/logrotate.httpd > $PKG/etc/logrotate.d/httpd.new
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION/
+cp -a \
+  ABOUT_APACHE Apache.dsw BuildBin.dsp CHANGES INSTALL InstallBin.dsp LAYOUT LICENSE NOTICE NWGNUmakefile README* ROADMAP VERSIONING \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+# Other distributions also strip the manual down to just English.
+# If this isn't your language of choice, mea culpa.
+( cd $PKG/srv/httpd/htdocs/manual
+  for file in $(find . -type f -name "*.html") ; do
+    if [ -f ${file}.en ]; then
+      cp ${file}.en ${file}
+      rm -f ${file}.*
+    fi
+  done
+)
+
+# On Slackware, the traditional location for the Apache document root has always
+# been "/var/www/htdocs/".  We can avoid an unpleasant surprise for people by
+# leaving things where they've always been, and comply with the FHS by providing
+# symlinks allowing access through the FHS-approved pathnames.  KDE, for example,
+# will look for htdig's htsearch here:  /var/www/cgi-bin/htsearch
+mv $PKG/srv/httpd $PKG/var/www
+( cd $PKG/srv
+  ln -sf /var/www .
+  ln -sf /var/www httpd
+)
+
+# OK, it's just not generally good form to put your web site in /var/www/htdocs,
+# but people do it every day.  Like all new .new files, this won't save them this
+# time, but if they don't learn their lesson now then it will the next time:
+mv $PKG/var/www/htdocs/index.html $PKG/var/www/htdocs/index.html.new
+
+# Strip binaries:
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.*
+      )
+    done
+  )
+fi
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz
+