Slackware 13.0slackware-13.0

Wed Aug 26 10:00:38 CDT 2009
Slackware 13.0 x86_64 is released as stable!  Thanks to everyone who
helped make this release possible -- see the RELEASE_NOTES for the
credits.  The ISOs are off to the replicator.  This time it will be a
6 CD-ROM 32-bit set and a dual-sided 32-bit/64-bit x86/x86_64 DVD.
We're taking pre-orders now at store.slackware.com.  Please consider
picking up a copy to help support the project.  Once again, thanks to
the entire Slackware community for all the help testing and fixing
things and offering suggestions during this development cycle.
As always, have fun and enjoy!  -P.

3 files changed, 154 insertions, 0 deletions

diff --git a/source/l/fuse/doinst.sh b/source/l/fuse/doinst.sh
new file mode 100644
index 000000000..cbb956244
--- /dev/null
+++ b/source/l/fuse/doinst.sh
@@ -0,0 +1,24 @@
+#!/bin/sh
+
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+# Keep same perms on rc.fuse.new:
+if [ -e etc/rc.d/rc.fuse ]; then
+  cp -a etc/rc.d/rc.fuse etc/rc.d/rc.fuse.new.incoming
+  cat etc/rc.d/rc.fuse.new > etc/rc.d/rc.fuse.new.incoming
+  mv etc/rc.d/rc.fuse.new.incoming etc/rc.d/rc.fuse.new
+fi
+
+config etc/rc.d/rc.fuse.new
+
diff --git a/source/l/fuse/fuse.SlackBuild b/source/l/fuse/fuse.SlackBuild
new file mode 100755
index 000000000..96569eeab
--- /dev/null
+++ b/source/l/fuse/fuse.SlackBuild
@@ -0,0 +1,111 @@
+#!/bin/sh
+
+# Copyright (c) 2008, Antonio Hernandez Blas <hba.nihilismus@gmail.com>
+# Copyright 2008, 2009  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+# 1.- Redistributions of source code must retain the above copyright
+#     notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY
+# EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+# DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+# DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+# Modified by Robby Workman <rworkman@slackware.com>
+# Modified by Eric Hameleers <alien@slackware.com>
+
+PRGNAM=fuse
+VERSION=2.7.4
+ARCH=${ARCH:-x86_64}
+NUMJOBS=${NUMJOBS:-" -j7 "}
+BUILD=${BUILD:-2}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PRGNAM
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar xvf $CWD/$PRGNAM-$VERSION.tar.gz
+cd $PRGNAM-$VERSION
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --bindir=/bin \
+  --sbindir=/sbin \
+  --libdir=/lib${LIBDIRSUFFIX} \
+  --with-pkgconfigdir=/usr/lib${LIBDIRSUFFIX}/pkgconfig \
+  --includedir=/usr/include \
+  --localstatedir=/var \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PRGNAM-$VERSION \
+  --enable-lib \
+  --enable-util \
+  --disable-static \
+  --disable-kernel-module \
+  --build=${ARCH}-slackware-linux \
+  || exit 1
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+# Move the start|stop script of fuse to the right place.
+mv $PKG/etc/init.d $PKG/etc/rc.d
+mv $PKG/etc/rc.d/fuse $PKG/etc/rc.d/rc.fuse.new
+
+# udev handles device node creation
+rm -rf $PKG/dev
+
+# Move the udev rules to the correct location
+mkdir -p $PKG/lib
+mv $PKG/etc/udev $PKG/lib
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a \
+  AUTHORS COPYING COPYING.LIB FAQ Filesystems INSTALL NEWS README \
+  README.NFS doc/how-fuse-works doc/kernel.txt \
+  $PKG/usr/doc/$PRGNAM-$VERSION
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/l/fuse/slack-desc b/source/l/fuse/slack-desc
new file mode 100644
index 000000000..0241a29bf
--- /dev/null
+++ b/source/l/fuse/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+    |-----handy-ruler------------------------------------------------------|
+fuse: FUSE (Filesystem in Userspace)
+fuse: 
+fuse: FUSE is a simple interface for userspace programs to export a virtual
+fuse: filesystem to the Linux kernel.  FUSE also aims to provide a secure
+fuse: method for non privileged users to create and mount their own
+fuse: filesystem implementations.
+fuse:
+fuse: The FUSE web site can be found here: http://fuse.sourceforge.net
+fuse:
+fuse:
+fuse: