Slackware 13.0slackware-13.0

Wed Aug 26 10:00:38 CDT 2009
Slackware 13.0 x86_64 is released as stable!  Thanks to everyone who
helped make this release possible -- see the RELEASE_NOTES for the
credits.  The ISOs are off to the replicator.  This time it will be a
6 CD-ROM 32-bit set and a dual-sided 32-bit/64-bit x86/x86_64 DVD.
We're taking pre-orders now at store.slackware.com.  Please consider
picking up a copy to help support the project.  Once again, thanks to
the entire Slackware community for all the help testing and fixing
things and offering suggestions during this development cycle.
As always, have fun and enjoy!  -P.

1 files changed, 387 insertions, 0 deletions

diff --git a/source/a/pkgtools/scripts/upgradepkg b/source/a/pkgtools/scripts/upgradepkg
new file mode 100644
index 000000000..cc3250dae
--- /dev/null
+++ b/source/a/pkgtools/scripts/upgradepkg
@@ -0,0 +1,387 @@
+#!/bin/sh
+# Copyright 1999  Patrick Volkerding, Moorhead, Minnesota, USA 
+# Copyright 2001, 2002, 2003  Slackware Linux, Inc., Concord, California, USA
+# Copyright 2009  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# Modified to handle either old 8.3 or new package-version-arch-build.tgz
+# packages, Sat Nov 17 14:25:58 PST 2001 volkerdi
+#
+# Rewritten to clean out _all_ old packages of a given basename, not just
+# the first one found, Thu Apr  4 01:01:05 PST 2002 volkerdi
+#
+# Added --install-new and --reinstall, Fri May 31 14:11:14 PDT 2002 volkerdi
+# Added --dry-run, Sat Apr 26 18:13:29 PDT 2003
+#
+# Sat Apr 25 21:18:53 UTC 2009
+# Support new compression types and package extensions.
+# Converted to use new pkgbase() function to remove pathname and
+# valid package extensions.
+
+# Return a package name that has been stripped of the dirname portion
+# and any of the valid extensions (only):
+pkgbase() {
+  PKGEXT=$(echo $1 | rev | cut -f 1 -d . | rev)
+  case $PKGEXT in
+  'tgz' )
+    PKGRETURN=$(basename $1 .tgz)
+    ;;
+  'tbz' )
+    PKGRETURN=$(basename $1 .tbz)
+    ;;
+  'tlz' )
+    PKGRETURN=$(basename $1 .tlz)
+    ;;
+  'txz' )
+    PKGRETURN=$(basename $1 .txz)
+    ;;
+  *)
+    PKGRETURN=$(basename $1)
+    ;;
+  esac
+  echo $PKGRETURN
+}
+
+usage() {
+ cat << EOF
+
+Usage: upgradepkg newpackage [newpackage2 ... ]
+       upgradepkg oldpackage%newpackage [oldpackage2%newpackage2 ... ]
+
+Upgradepkg upgrades a Slackware package (.tgz, .tbz, .tlz, .txz) from an
+older version to a newer one.  It does this by INSTALLING the new package
+onto the system, and then REMOVING any files from the old package that
+aren't in the new package.  If the old and new packages have the same
+name, a single argument is all that is required.  If the packages have
+different names, supply the name of the old package followed by a percent
+symbol (%), then the name of the new package.  Do not add any extra
+whitespace between pairs of old/new package names.
+
+Before upgrading a package, save any configuration files (such as in /etc)
+that you wish to keep.  Sometimes these will be preserved, but it depends
+on the package.  If you want to force new versions of the config files
+to be installed, remove the old ones manually prior to running upgradepkg.
+
+To upgrade in a directory other than / (such as /mnt):  
+
+   ROOT=/mnt upgradepkg package.tgz (or .tbz, .tlz, .txz)
+
+EOF
+}
+
+# Make sure there's a proper temp directory:
+TMP=$ROOT/var/log/setup/tmp
+# If the $TMP directory doesn't exist, create it:
+if [ ! -d $TMP ]; then
+  rm -rf $TMP # make sure it's not a symlink or something stupid
+  mkdir $TMP
+  chmod 700 $TMP # no need to leave it open
+fi
+
+# This script expects an 022 umask:
+umask 022
+
+# $ROOT defined?
+if [ -d "$ROOT" ]; then
+  export ROOT
+fi
+
+# --help or no args?
+if [ "$1" = "" -o "$1" = "--help" -o "$1" = "-?" ]; then
+  usage;
+  exit 1;
+fi
+
+# Arg processing loop.  These must come before any packages are listed.
+while [ 0 ]; do
+  if [ "$1" = "--no-paranoia" ]; then
+    # Enable --no-paranoia mode.  This is so not-recommended that we're
+    # not even going to document it. ;)   If a file used to be directly
+    # managed and now is moved into place, using --no-paranoia will cause
+    # it to improperly disappear.  It does slightly speed things up, though.
+    # Don't use it.
+    NOT_PARANOID="true"
+    shift 1
+  elif [ "$1" = "--install-new" ]; then
+    # Install packages that do not already have an installed version.
+    # The usual default is to skip them.
+    INSTALL_NEW="yes"
+    shift 1
+  elif [ "$1" = "--reinstall" ]; then
+    # Reinstall packages even if the installed one is the same version.
+    REINSTALL="true"
+    shift 1
+  elif [ "$1" = "--verbose" -o "$1" = "-v" ]; then
+    # We're adding a --verbose mode that doesn't filter removepkg as much
+    VERBOSE="verbose"
+    shift 1
+  elif [ "$1" = "--dry-run" ]; then
+    # Output a report about which packages would be installed or upgraded
+    # but don't actually perform the upgrades.
+    DRY_RUN="true"
+    shift 1
+  else # no more args
+    break;
+  fi
+done # processing args
+
+# Here's a function to figure out the package name from one of those
+# new long filenames.  We'll need this to double check the name of the
+# old package.
+
+package_name() {
+  STRING=$(pkgbase $1)
+  # Check for old style package name with one segment:
+  if [ "$(echo $STRING | cut -f 1 -d -)" = "$(echo $STRING | cut -f 2 -d -)" ]; then
+    echo $STRING
+  else # has more than one dash delimited segment
+    # Count number of segments:
+    INDEX=1
+    while [ ! "$(echo $STRING | cut -f $INDEX -d -)" = "" ]; do
+      INDEX=$(expr $INDEX + 1)
+    done
+    INDEX=$(expr $INDEX - 1) # don't include the null value
+    # If we don't have four segments, return the old-style (or out of spec) package name:
+    if [ "$INDEX" = "2" -o "$INDEX" = "3" ]; then
+      echo $STRING
+    else # we have four or more segments, so we'll consider this a new-style name:
+      NAME=$(expr $INDEX - 3)
+      NAME="$(echo $STRING | cut -f 1-$NAME -d -)"
+      echo $NAME
+      # cruft for later ;)
+      #VER=$(expr $INDEX - 2)
+      #VER="$(echo $STRING | cut -f $VER -d -)"
+      #ARCH=$(expr $INDEX - 1)
+      #ARCH="$(echo $STRING | cut -f $ARCH -d -)"
+      #BUILD="$(echo $STRING | cut -f $INDEX -d -)"
+    fi
+  fi
+}
+
+ERRCODE=0
+
+# Main processing loop:
+while [ ! "$1" = "" ]; do
+
+# Simple package integrity check:
+if [ ! -f $(echo $1 | cut -f 2 -d '%') ]; then
+  ERRCODE=4
+  echo "Cannot install $1:  file not found"
+  shift 1
+  continue;
+fi
+
+# Figure out the names of the old and new packages:
+OLD=$(echo $1 | cut -f 1 -d '%')
+NEW=$(echo $1 | cut -f 2 -d '%')
+INCOMINGDIR=$(dirname $NEW)
+# These are the package names with the extension:
+NNAME=$(basename $NEW)
+ONAME=$(basename $OLD)
+# These are the package names without the extension:
+OLD=$(pkgbase $OLD)
+NEW=$(pkgbase $NEW)
+
+# Make sure the extension is valid:
+if [ "$NNAME" = "$NEW" ]; then
+  # We won't throw an ERRCODE for this, but the package is skipped:
+  echo "Cannot install $1:  invalid package extension"
+  shift 1
+  continue;
+fi
+
+# Check and fix the old package name:
+SHORT="$(package_name $OLD)"
+if [ ! -r $ROOT/var/log/packages/$OLD ]; then
+  if ls $ROOT/var/log/packages/$SHORT* 1> /dev/null 2> /dev/null ; then
+    for installed_package in $ROOT/var/log/packages/$SHORT* ; do
+      if [ "$(package_name $installed_package)" = "$SHORT" ]; then # found one
+        OLD="$(basename $installed_package)"
+        break
+      fi
+    done
+  fi
+fi
+
+# Test to see if both the old and new packages are where we expect them
+# to be -- skip to the next package (or package pair) if anything's wrong:
+
+if [ ! -r $ROOT/var/log/packages/$OLD ]; then
+  if [ ! "$INSTALL_NEW" = "yes" ]; then
+    if [ "$DRY_RUN" = "true" ]; then
+      echo "$OLD would not be upgraded (no installed package named $SHORT)."
+    else  
+      echo
+      echo "Error:  there is no installed package named $OLD."
+      echo "        (looking for $ROOT/var/log/packages/$OLD)"
+      echo
+    fi
+    ERRCODE=1
+  else # --install-new was given, so install the new package:
+    if [ "$DRY_RUN" = "true" ]; then
+      echo "$NEW would be installed (new package)."
+    else
+      cat << EOF
+
++==============================================================================
+| Installing new package $INCOMINGDIR/$NNAME
++==============================================================================
+
+EOF
+      installpkg $INCOMINGDIR/$NNAME
+    fi
+  fi
+  shift 1
+  continue;
+elif [ ! -r "$INCOMINGDIR/$NNAME" ]; then
+  if [ "$DRY_RUN" = "true" ]; then
+    echo "$NEW incoming package not found (command line)."
+  else
+    echo
+    echo "Error:  incoming package $INCOMINGDIR/$NNAME not found."
+    echo
+  fi
+  shift 1
+  ERRCODE=1
+  continue;
+fi
+
+# Unless --reinstall was given, compare the package names
+# and skip any exact matches:
+if [ ! "$REINSTALL" = "true" ]; then
+  if [ "$OLD" = "$NEW" ]; then
+    if [ "$DRY_RUN" = "true" ]; then
+      echo "$NEW would be skipped (already installed)."
+    else
+      cat << EOF
+
++==============================================================================
+| Skipping package $NEW (already installed)
++==============================================================================
+
+EOF
+    fi
+    shift 1
+    continue; 
+  fi
+fi
+
+# Showtime.  Let's do the upgrade.  First, we will rename all the
+# installed packages with this basename to make them easy to remove later:
+
+TIMESTAMP=$(date +%Y-%m-%d,%T)
+SHORT="$(package_name $OLD)"
+if [ "$DRY_RUN" = "true" ]; then
+  echo -n "$NEW would upgrade: "
+  for installed_package in $ROOT/var/log/packages/$SHORT* ; do
+  if [ "$(package_name $installed_package)" = "$SHORT" ]; then
+    echo -n "$(pkgbase $installed_package)"
+  fi
+  done
+  echo
+  shift 1
+  continue
+fi
+for installed_package in $ROOT/var/log/packages/$SHORT* ; do
+  if [ "$(package_name $installed_package)" = "$SHORT" ]; then
+    mv $installed_package ${installed_package}-upgraded-$TIMESTAMP
+  fi
+done
+for installed_script in $ROOT/var/log/scripts/$SHORT* ; do
+  if [ "$(package_name $installed_script)" = "$SHORT" ]; then
+    if [ -r $installed_script ]; then
+      mv $installed_script ${installed_script}-upgraded-$TIMESTAMP
+    fi
+  fi
+done
+
+# Print a banner for the current upgrade:
+cat << EOF
+
++==============================================================================
+| Upgrading $OLD package using $INCOMINGDIR/$NNAME
++==============================================================================
+
+EOF
+
+# Next, the new package is pre-installed:
+if [ "$VERBOSE" = "verbose" ]; then
+  installpkg $INCOMINGDIR/$NNAME
+  RETCODE=$?
+else
+  echo "Pre-installing package $NEW..."
+  installpkg $INCOMINGDIR/$NNAME 1> /dev/null
+  RETCODE=$?
+fi
+# Make sure that worked:
+if [ ! $RETCODE = 0 ]; then
+  echo "ERROR:  Package $INCOMINGDIR/$NNAME did not install"
+  echo "correctly.  You may need to reinstall your old package"
+  echo "to avoid problems.  Make sure the new package is not"
+  echo "corrupted."
+  sleep 30
+  # Skip this package, but still try to proceed.  Good luck...
+  shift 1
+  continue;
+fi
+
+# Now, the leftovers from the old package(s) can go.  Pretty simple, huh? :)
+if [ -d "$ROOT" ]; then
+  ( cd $ROOT/var/log/packages
+    for rempkg in *-$TIMESTAMP ; do
+      if [ "$VERBOSE" = "verbose" ]; then
+        ROOT=$ROOT removepkg $rempkg
+      else
+        ROOT=$ROOT removepkg $rempkg | grep -v "Skipping\." | grep -v "Removing files:"
+      fi
+    done
+  )
+else
+  ( cd /var/log/packages
+    for rempkg in *-$TIMESTAMP ; do
+      if [ "$VERBOSE" = "verbose" ]; then
+        removepkg $rempkg
+      else
+        removepkg $rempkg | grep -v "Skipping\." | grep -v "Removing files:"
+      fi
+    done
+  )
+fi
+echo
+
+# Again!  Again!
+# Seriously, the reinstalling of a package can be crucial if any files
+# shift location, so we should always reinstall as the final step:
+if [ ! "$NOT_PARANOID" = "true" ]; then
+  installpkg $INCOMINGDIR/$NNAME
+fi
+
+echo "Package $OLD upgraded with new package $INCOMINGDIR/$NNAME."
+ERRCODE=0
+
+# Process next parameter:
+shift 1
+
+done
+
+if [ ! "$DRY_RUN" = "true" ]; then
+  echo
+fi
+exit $ERRCODE