blob: 4703671ff1056b6c16e20c5b67c7b5d7bd646092 (
plain) (
tree)
|
|
#!/bin/sh
#BLURB="Configure the console mouse support (GPM)."
T_PX=$1
TMP=/var/log/setup/tmp
GPM=/usr/sbin/gpm
# If the mouse is USB, we can autodetect it:
if [ -r /proc/bus/input/devices ]; then
if grep -B3 Handlers=mouse /proc/bus/input/devices | grep Phys=usb 1>/dev/null 2>/dev/null; then
MOUSE_TYPE=usb
MTYPE="imps2"
( cd $T_PX/dev ; rm -f mouse ; ln -sf input/mice mouse )
fi
fi
if [ "$MOUSE_TYPE" = "" ]; then
dialog --title "MOUSE CONFIGURATION" --default-item "imps2" --menu \
"This part of the configuration \
process will create a /dev/mouse link pointing to your default mouse device. \
You can change the /dev/mouse link later if the mouse doesn't work, or if \
you switch to a different type of pointing device. We will also use the \
information about the mouse to set the correct protocol for gpm, the Linux \
mouse server. Please select a mouse type \
from the list below:" 20 76 8 \
"ps2" "PS/2 port mouse (most desktops and laptops)" \
"usb" "USB connected mouse" \
"imps2" "Microsoft PS/2 Intellimouse" \
"exps2" "Intellimouse Explorer PS/2" \
"bare" "2 button Microsoft compatible serial mouse" \
"ms" "3 button Microsoft compatible serial mouse" \
"mman" "Logitech serial MouseMan and similar devices" \
"msc" "MouseSystems serial (most 3 button serial mice)" \
"pnp" "Plug and Play (serial mice that do not work with ms)" \
"ms3" "Microsoft serial Intellimouse" \
"netmouse" "Genius Netmouse on PS/2 port" \
"logi" "Some serial Logitech devices" \
"logim" "Make serial Logitech behave like msc" \
"atibm" "ATI XL busmouse (mouse card)" \
"inportbm" "Microsoft busmouse (mouse card)" \
"logibm" "Logitech busmouse (mouse card)" \
"ncr" "A pointing pen (NCR3125) on some laptops" \
"twid" "Twiddler keyboard, by HandyKey Corp" \
"genitizer" "Genitizer tablet (relative mode)" \
"js" "Use a joystick as a mouse" \
"wacom" "Wacom serial graphics tablet" \
2> $TMP/mtype
if [ ! $? = 0 ]; then
rm -f $TMP/mtype
exit
fi
if [ -f $TMP/mtype ]; then
MOUSE_TYPE="`cat $TMP/mtype`"
else
unset MOUSE_TYPE
fi
rm -f $TMP/mtype
if [ "$MOUSE_TYPE" = "bare" -o "$MOUSE_TYPE" = "ms" \
-o "$MOUSE_TYPE" = "mman" -o "$MOUSE_TYPE" = "msc" \
-o "$MOUSE_TYPE" = "genitizer" \
-o "$MOUSE_TYPE" = "pnp" -o "$MOUSE_TYPE" = "ms3" \
-o "$MOUSE_TYPE" = "logi" -o "$MOUSE_TYPE" = "logim" \
-o "$MOUSE_TYPE" = "wacom" -o "$MOUSE_TYPE" = "twid" ]; then
dialog --title "SELECT SERIAL PORT" --menu "Your mouse requires a \
serial port. Which one would you like to use?" 12 50 4 \
"/dev/ttyS0" "(COM1: under DOS)" \
"/dev/ttyS1" "(COM2: under DOS)" \
"/dev/ttyS2" "(COM3: under DOS)" \
"/dev/ttyS3" "(COM4: under DOS)" 2> $TMP/mport
if [ ! $? = 0 ]; then
rm -f $TMP/mport
exit
fi
MDEVICE="`cat $TMP/mport`"
SHORT_MDEVICE=`basename $MDEVICE`
( cd $T_PX/dev ; rm -f mouse ; ln -sf $SHORT_MDEVICE mouse )
# For the serial mice, the protocol is the same as the mouse type:
MTYPE=$MOUSE_TYPE
rm -f $TMP/mport
elif [ "$MOUSE_TYPE" = "ps2" ]; then
( cd $T_PX/dev ; rm -f mouse ; ln -sf psaux mouse )
MTYPE="ps2"
elif [ "$MOUSE_TYPE" = "ncr" ]; then
( cd $T_PX/dev ; rm -f mouse ; ln -sf psaux mouse )
MTYPE="ncr"
elif [ "$MOUSE_TYPE" = "exps2" ]; then
( cd $T_PX/dev ; rm -f mouse ; ln -sf psaux mouse )
MTYPE="exps2"
elif [ "$MOUSE_TYPE" = "imps2" ]; then
( cd $T_PX/dev ; rm -f mouse ; ln -sf psaux mouse )
MTYPE="imps2"
elif [ "$MOUSE_TYPE" = "logibm" ]; then
( cd $T_PX/dev ; rm -f mouse ; ln -sf logibm mouse )
MTYPE="ps2"
elif [ "$MOUSE_TYPE" = "atibm" ]; then
( cd $T_PX/dev ; rm -f mouse ; ln -sf atibm mouse )
MTYPE="ps2"
elif [ "$MOUSE_TYPE" = "inportbm" ]; then
( cd $T_PX/dev ; rm -f mouse ; ln -sf inportbm mouse )
MTYPE="bm"
elif [ "$MOUSE_TYPE" = "js" ]; then
( cd $T_PX/dev ; rm -f mouse ; ln -sf js0 mouse )
MTYPE="js"
elif [ "$MOUSE_TYPE" = "usb" ]; then
( cd $T_PX/dev ; rm -f mouse ; ln -sf input/mice mouse )
MTYPE="imps2"
fi
fi
# OK, we know enough now to create a sample rc.gpm:
cat << EOF > $T_PX/etc/rc.d/rc.gpm-sample
#!/bin/sh
# Start/stop/restart the GPM mouse server:
if [ "\$1" = "stop" ]; then
echo "Stopping gpm..."
$GPM -k
elif [ "\$1" = "restart" ]; then
echo "Restarting gpm..."
$GPM -k
sleep 1
$GPM -m /dev/mouse -t $MTYPE
else # assume \$1 = start:
echo "Starting gpm: $GPM -m /dev/mouse -t $MTYPE"
$GPM -m /dev/mouse -t $MTYPE
fi
# There is another way to run GPM, where it acts as a repeater outputting a
# virtual MouseSystems mouse on /dev/gpmdata. This is useful for feeding
# gpm's data to X, especially if you've got a busmouse (in that situation X
# and gpm may not coexist without using a repeater). To try running a GPM
# repeater for X, change the gpm command line to look like this:
# $GPM -R msc -m /dev/mouse -t $MTYPE
# Then, make sure that the mouse configuration in your XF86Config file refers
# to the repeater device (/dev/gpmdata) and a MouseSystems mouse type. If you
# edit the file directly, you'll want the lines to look like this (minus the
# comment marks '#' shown here, of course):
#Section "Pointer"
# Protocol "MouseSystems"
# Device "/dev/gpmdata"
EOF
chmod 755 $T_PX/etc/rc.d/rc.gpm-sample
# Now ask if this should be the new rc.gpm:
dialog --title "GPM CONFIGURATION" --yesno \
"The gpm program allows you to cut and paste text on\n\
the virtual consoles using a mouse. If you choose to\n\
run it at boot time, this line will be added to your\n\
/etc/rc.d/rc.gpm:\n\
\n\
$GPM -m /dev/mouse -t $MTYPE \n\
\n\
Shall we load the gpm program at boot time?" 12 58
if [ $? = 0 ]; then
mv $T_PX/etc/rc.d/rc.gpm-sample $T_PX/etc/rc.d/rc.gpm
fi
|
