path: root/ffmpeg/build/ffmpeg.SlackBuild

#!/bin/sh
# $Id$
# Copyright (c) 2007 Eric Hameleers <alien@slackware.com>
# All rights reserved.
#
#   Permission to use, copy, modify, and distribute this software for
#   any purpose with or without fee is hereby granted, provided that
#   the above copyright notice and this permission notice appear in all
#   copies.
#
#   THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED
#   WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
#   MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
#   IN NO EVENT SHALL THE AUTHORS AND COPYRIGHT HOLDERS AND THEIR
#   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
#   USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
#   ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
#   OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
#   OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
#   SUCH DAMAGE.
# -----------------------------------------------------------------------------
#
# Slackware SlackBuild script 
# ===========================
# By:         Eric Hameleers <alien@slackware.com>
# For:        ffmpeg
# Descr:      software to record, convert and stream audio and video
# URL:        http://ffmpeg.mplayerhq.hu/
# Needs:     
# Changelog:
# 20070519-1: 19/May/2007 by Eric Hameleers <alien@slackware.com>
#             * Initial build.
#               Note that the version is set to the current date
#               (using `date +%Y%d%m` output) when you build ffmpeg
#               from source using this SlackBuild.
#               You can override this behaviour by prepending a specific
#               value for VERSION to the build command, like so:
#               VERSION=20070519 ./ffmpeg.SlackBuild
# 20070612-1: 12/jun/2007 by Eric Hameleers <alien@slackware.com>
#             * Update. Also, make sure that the script actually works
#               for newer snapshots if they should be downloaded.
# 20071006-1: 06/oct/2007 by Eric Hameleers <alien@slackware.com>
#             * Update. Added documentation of the included libraries.
# 20071209-1: 09/dec/2007 by Eric Hameleers <alien@slackware.com>
#             * Update. Re-added AMR libraries, added libgsm, messed up
#               the SlackBuild script pretty good.
# 
# Run 'sh ffmpeg.SlackBuild --cleanup' to build a Slackware package.
# The package (.tgz) plus descriptive .txt file are created in /tmp .
# Install using 'installpkg'. 
#
# -----------------------------------------------------------------------------

# Set initial variables:

# -- PATENT ALERT! --
# FFmpeg can be built with MP3 audio encoder (needed for FLV videos)
# and AMR audio encoder (needed for 3GGP videos) but these libraries are
# 'contaminated' with patents from Fraunhofer and GGP.
# You can build these patended algorithms into ffmpeg, and if you are an
# ordinary end user, no one will bother you for using them.
# For the binaries based on this SlackBuild that I distribute, it is a
# different story. I am not allowed to distribute binary packages that
# incorporate patented code. So here you go. My Slackware package was built
# with "USE_PATENTS=NO" i.e. without using the lame mp3 libary and without the
# AMR libraries.
#USE_PATENTS="NO"
USE_PATENTS=${USE_PATENTS:-"YES"}

if [ "${USE_PATENTS}" == "YES" ]; then
  echo ""
  echo "**"
  echo "** This build uses patented code (MP3 / AMR encoders)"
  echo "** Run the command 'USE_PATENTS=NO $0 $*' to avoid patent issues."
  echo "**"
  echo ""
fi

PRGNAM=ffmpeg
VERSION=${VERSION:-20071209}
ARCH=${ARCH:-i486}
BUILD=${BUILD:-1}

DOCS="COPYING* CREDITS Changelog MAINTAINERS README* \
      doc/TODO doc/*.txt doc/*.html"
DOCS_A52="AUTHORS COPYING* ChangeLog HISTORY NEWS README* TODO"
DOCS_AMRNB="AUTHORS COPYING ChangeLog INSTALL NEWS README TODO"
DOCS_AMRWB="AUTHORS COPYING ChangeLog INSTALL NEWS README TODO"
DOCS_FAAC="AUTHORS COPYING* ChangeLog NEWS README* TODO"
DOCS_FAAD2="AUTHORS COPYING* ChangeLog NEWS README* TODO"
DOCS_GSM="COPYRIGHT ChangeLog* INSTALL MACHINES MANIFEST README"
DOCS_LAME="API COPYING ChangeLog HACKING LICENSE README STYLEGUIDE TODO USAGE"
DOCS_X264="AUTHORS COPYING"
DOCS_XVID="AUTHORS ChangeLog* CodingStyle LICENSE README TODO"

# Support libraries:
A52=0.7.4
AMRNB=7.0.0.0
AMRWB=7.0.0.2
DC1394=1.2.2
FAAC=1.26
FAAD2=2.6.1
GSM=1.0.12
LAME=3.97
RAW1394=1.3.0
X264=20071209-2245
XVID=1.1.3

# Where do we look for sources?
CWD=`pwd`
SRCDIR=`dirname $0`
[ "${SRCDIR:0:1}" == "." ] && SRCDIR=${CWD}/${SRCDIR}

# Place to build (TMP) package (PKG) and output (OUTPUT) the program:
TMP=${TMP:-/tmp/build}
PKG=$TMP/package-$PRGNAM
OUTPUT=${OUTPUT:-/tmp}

SOURCE[0]="$SRCDIR/${PRGNAM}-${VERSION}.tar.bz2"
#SRCURL[0]="http://ffmpeg.mplayerhq.hu/${PRGNAM}-export-snapshot.tar.bz2"
SRCURL[0]=""
SRCPAT[0]="NO"

# XVIDcore library, will be statically linked against with ffmpeg
SOURCE[1]="$SRCDIR/xvidcore-$XVID.tar.gz"
SRCURL[1]="http://downloads.xvid.org/downloads/xvidcore-$XVID.tar.gz"
SRCPAT[1]="NO"

# FAAC library, will be statically linked with ffmpeg
SOURCE[2]="$SRCDIR/faac-$FAAC.tar.gz"
SRCURL[2]="http://dl.sourceforge.net/faac/faac-$FAAC.tar.gz"
SRCPAT[2]="NO"

# The A52 decoder - aka AC3, will be statically linked 
SOURCE[3]="$SRCDIR/a52dec-$A52.tar.gz"
SRCURL[3]="http://liba52.sourceforge.net/files/a52dec-$A52.tar.gz"
SRCPAT[3]="NO"

# X264 encoder - for H264/AVC video streams, for static linking
SOURCE[4]="$SRCDIR/x264-snapshot-${X264}.tar.bz2"
SRCURL[4]="ftp://ftp.videolan.org/pub/videolan/x264/snapshots/x264-snapshot-${X264}.tar.bz2"
SRCPAT[4]="NO"

# FAAD2 support:
SOURCE[5]="$SRCDIR/faad2-$FAAD2.tar.gz"
SRCURL[5]="http://dl.sourceforge.net/faac/faad2-$FAAD2.tar.gz"
SRCPAT[5]="NO"

# GSM support:
SOURCE[6]="$SRCDIR/gsm-$GSM.tar.gz"
SRCURL[6]="http://kbs.cs.tu-berlin.de/~jutta/gsm/gsm-$GSM.tar.gz"
SRCPAT[6]="NO"

# Lame is used for the audio in FLV videos; will statically link with ffmpeg
SOURCE[7]="$SRCDIR/lame-$LAME.tar.gz"
SRCURL[7]="http://dl.sourceforge.net/lame/lame-$LAME.tar.gz"
SRCPAT[7]="YES"

# AMR encoder libraries used in ffmpeg to encode 3GPP audio
# amr narrowband wrapper:
SOURCE[8]="$SRCDIR/amrnb-${AMRNB}.tar.bz2"
SRCURL[8]="http://ftp.penguin.cz/pub/users/utx/amr/amrnb-${AMRNB}.tar.bz2"
SRCPAT[8]="YES"

# amr narrowband library:
SOURCE[9]="$SRCDIR/26104-700.zip"
SRCURL[9]="http://www.3gpp.org/ftp/Specs/archive/26_series/26.104/26104-700.zip"
SRCPAT[9]="YES"

# amr wideband wrapper:
SOURCE[10]="$SRCDIR/amrwb-${AMRWB}.tar.bz2"
SRCURL[10]="http://ftp.penguin.cz/pub/users/utx/amr/amrwb-${AMRWB}.tar.bz2"
SRCPAT[10]="YES"

# amr wideband library:
SOURCE[11]="$SRCDIR/26204-700.zip"
SRCURL[11]="http://www.3gpp.org/ftp/Specs/archive/26_series/26.204/26204-700.zip"
SRCPAT[11]="YES"

## Library needed to control IEEE 1394 (firewire-) based cameras
#SOURCE[12]="libraw1394-${RAW1394}.tar.gz"
#SRCURL[12]="http://www.linux1394.org/dl/libraw1394-${RAW1394}.tar.gz"
#SRCPAT[12]="NO"
#
#SOURCE[13]="libdc1394-${DC1394}.tar.gz"
#SRCURL[13]=http://downloads.sourceforge.net/libdc1394/libdc1394-${DC1394}.tar.gz"
#SRCPAT[13]="NO"

# Use the src_checkout() function if no downloadable tarball exists.
# Call this function for instance like this: "src_checkout 4 ${SOURCE[4]}"
src_checkout() {
  # Param #1 : index in the SOURCE array.
  # Param #2 : full path to where SOURCE tarball must be created.
  case ${1} in
  0) if [ "$(echo ${VERSION}|cut -c1)" == 'r' ]; then # revision instead of date
       REV=$(echo ${VERSION}|cut -c2-)
     else
       REV="{${VERSION}}"
     fi
     mkdir ffmpeg-${VERSION} \
       && cd ffmpeg-${VERSION} \
       && svn checkout --revision $REV svn://svn.mplayerhq.hu/ffmpeg/trunk . \
       && chown -R root:root . \
       && cd .. \
       && tar -jcf ${2} ffmpeg-${VERSION} \
       && rm -rf ffmpeg-${VERSION}
     ;;
  *) ;;
  esac
}

##
## --- with a little luck, you won't have to edit below this point --- ##
##

# Exit the script on errors:
set -e
trap 'echo "$0 FAILED at line $LINENO!" | tee $OUTPUT/error-${PRGNAM}.log' ERR
# Catch unitialized variables:
set -u
P1=${1:-1}

# Slackware 11 and up need other option (gcc > 3.3.x)
if [ `gcc -dumpversion | tr -d  '.' |cut -c 1-2` -gt 33 ]; then
  MOPT=tune
else
  MOPT=cpu
fi

case "$ARCH" in
  i386)      SLKCFLAGS="-O2 -march=i386 -m${MOPT}=i686"
             SLKLDFLAGS=""; LIBDIRSUFFIX=""
             ;;
  i486)      SLKCFLAGS="-O2 -march=i486 -m${MOPT}=i686"
             SLKLDFLAGS=""; LIBDIRSUFFIX=""
             ;;
  s390)      SLKCFLAGS="-O2"
             SLKLDFLAGS=""; LIBDIRSUFFIX=""
             ;;
  powerpc)   SLKCFLAGS="-O2"
             SLKLDFLAGS=""; LIBDIRSUFFIX=""
             ;;
  x86_64)    SLKCFLAGS="-O2 -fPIC"
             SLKLDFLAGS="-L/usr/lib64"; LIBDIRSUFFIX="64"
             ;;
  athlon-xp) SLKCFLAGS="-march=athlon-xp -O3 -pipe -fomit-frame-pointer"
             SLKLDFLAGS=""; LIBDIRSUFFIX=""
             ;;
esac

# Create working directories:
mkdir -p $TMP/tmp-$PRGNAM # location to build the source
if [ "$P1" != "--oldbuild" ]; then
  # If the "--oldbuild" parameter is present, we keep
  #  the old build files and continue;
  # By default we remove the remnants of previous build and continue:
  rm -rf $TMP/tmp-$PRGNAM/* $OUTPUT/*${PRGNAM}*.log
fi
mkdir -p $PKG     # place for the package to be built
rm -rf $PKG/*     # We always erase old package's contents:
mkdir -p $OUTPUT  # place for the package to be saved


# Source file availability:

# Regular URL downloads follow:
for (( i = 0; i < ${#SOURCE[*]}; i++ )) ; do
  # Only download patented code if we are allowing it:
  if [ "${USE_PATENTS}" == "YES" -o "${SRCPAT[$i]}" != "YES" ]; then
    if ! [ -f ${SOURCE[$i]} ]; then
      echo "Source '`basename ${SOURCE[$i]}`' not available yet..."
      # Check if the $SRCDIR is writable at all - if not, download to $OUTPUT
      [ -w "$SRCDIR" ] || SOURCE[$i]="$OUTPUT/`basename ${SOURCE[$i]}`"
      if ! [ "x${SRCURL[$i]}" == "x" ]; then
        echo "Will download file to `dirname $SOURCE[$i]`"
        if ! $(wget -nv -T 20 -O "${SOURCE[$i]}" "${SRCURL[$i]}"); then
          echo "Downloading '`basename ${SOURCE[$i]}`' failed.. aborting the build."
          mv -f "${SOURCE[$i]}" "${SOURCE[$i]}".FAIL
          exit 1
        fi
      else
        # Try if we have a SVN/CVS download routine for ${SOURCE[$i]}
        echo "Will checkout sources to `dirname $SOURCE[$i]`"
        src_checkout $i "${SOURCE[$i]}"
      fi
      if [ ! -f "${SOURCE[$i]}" -o ! -s "${SOURCE[$i]}" ]; then
        echo "File '`basename ${SOURCE[$i]}`' not available.. aborting the build."
        exit 1
      fi
    fi
  fi
done

if [ "$P1" == "--download" ]; then
  echo "Download complete."
  exit 0
fi

# --- PACKAGE BUILDING ---

echo "++"
echo "|| $PRGNAM-$VERSION"
echo "++"

cd $TMP/tmp-$PRGNAM
if [ "$P1" != "--oldbuild" ]; then
  echo "Extracting the source archive(s) for $PRGNAM..."
  for (( i = 0; i < ${#SOURCE[*]}; i++ )) ; do
    # Only extract patented code if we are allowing it:
    if [ "${USE_PATENTS}" == "YES" -o "${SRCPAT[$i]}" != "YES" ]; then
      if `file ${SOURCE[$i]} | grep -q ": bzip2"`; then
        tar -xjvf ${SOURCE[$i]}
      elif `file ${SOURCE[$i]} | grep -q ": gzip"`; then
        tar -xzvf ${SOURCE[$i]}
      elif `file ${SOURCE[$i]} | grep -iq ": zip"`; then
        unzip ${SOURCE[$i]}
      fi
    fi
  done
fi
chown -R root:root *
chmod -R u+w,go+r-w,a-s *

# --- BUILDING ---

echo Building ...

# We will be installing static libs into the following directory:
# (when linking ffmpeg together, these libs will be found & used)
mkdir -p $TMP/tmp-$PRGNAM/ffmpegdeps/usr/{bin,include,lib,man}

# -----------------------------------------------------------------------------
# Compile lame libraries
# The ffmpeg will use these
# -----------------------------------------------------------------------------
make_lame()
{
echo -e "**\n**  lame ...\n**"
cd $TMP/tmp-$PRGNAM/lame-${LAME}
CFLAGS="$SLKCFLAGS" \
CXXFLAGS="$SLKCFLAGS" \
LDFLAGS="$SLKLDFLAGS" \
./configure --prefix=/usr \
            --enable-static \
            --disable-shared \
            --program-prefix="" \
            --program-suffix="" \
            --build=$ARCH-slackware-linux \
            2>&1 | tee $OUTPUT/configure-${PRGNAM}_lame.log
make 2>&1 | tee $OUTPUT/make-${PRGNAM}_lame.log
# Install lame into a temp location so ffmpeg can pickup the library
make install DESTDIR=$TMP/tmp-$PRGNAM/ffmpegdeps \
  2>&1 | tee -a $OUTPUT/make-${PRGNAM}_lame.log
cd -
}

# -----------------------------------------------------------------------------
# Compile amr narrowband library
# The ffmpeg will use these
# -----------------------------------------------------------------------------
make_amrnb()
{
echo -e "**\n**  amrnb ...\n**"
cd $TMP/tmp-$PRGNAM/amrnb-${AMRNB}
# Copy the amrnb-float libraries to prevent the makefile downloading them:
cp ${SOURCE[11]} .
CFLAGS="$SLKCFLAGS" \
CXXFLAGS="$SLKCFLAGS" \
LDFLAGS="$SLKLDFLAGS" \
./configure --prefix=/usr \
            --enable-static \
            --disable-shared \
            --program-prefix="" \
            --program-suffix="" \
            --build=$ARCH-slackware-linux \
            2>&1 | tee $OUTPUT/configure-${PRGNAM}_amrnb.log
make 2>&1 | tee $OUTPUT/make-${PRGNAM}_amrnb.log
# Install amrnb into a temp location so ffmpeg can pickup the library
make install DESTDIR=$TMP/tmp-$PRGNAM/ffmpegdeps \
  2>&1 | tee -a $OUTPUT/make-${PRGNAM}_amrnb.log
cd -
}

# -----------------------------------------------------------------------------
# Compile amr wideband library
# The ffmpeg will use these
# -----------------------------------------------------------------------------
make_amrwb()
{
echo -e "**\n**  amrwb ...\n**"
cd $TMP/tmp-$PRGNAM/amrwb-${AMRWB}
# Copy the amrwb-float libraries to prevent the makefile downloading them:
cp ${SOURCE[5]} .
CFLAGS="$SLKCFLAGS" \
CXXFLAGS="$SLKCFLAGS" \
LDFLAGS="$SLKLDFLAGS" \
./configure --prefix=/usr \
            --enable-static \
            --disable-shared \
            --program-prefix="" \
            --program-suffix="" \
            --build=$ARCH-slackware-linux \
            2>&1 | tee $OUTPUT/configure-${PRGNAM}_amrwb.log
make 2>&1 | tee $OUTPUT/make-${PRGNAM}_amrwb.log
# Install amrwb into a temp location so ffmpeg can pickup the library
make install DESTDIR=$TMP/tmp-$PRGNAM/ffmpegdeps \
  2>&1 | tee -a $OUTPUT/make-${PRGNAM}_amrwb.log
cd -
}

# -----------------------------------------------------------------------------
# Compile xvidcore libraries
# The ffmpeg will use these
# -----------------------------------------------------------------------------
make_xvid()
{
echo -e "**\n**  xvid ...\n**"
cd $TMP/tmp-$PRGNAM/xvidcore-${XVID}/build/generic
CFLAGS="$SLKCFLAGS" \
CXXFLAGS="$SLKCFLAGS" \
LDFLAGS="$SLKLDFLAGS" \
./configure --prefix=/usr \
            --enable-static \
            --disable-shared \
            --program-prefix="" \
            --program-suffix="" \
            --build=$ARCH-slackware-linux \
            2>&1 | tee $OUTPUT/configure-${PRGNAM}_xvid.log
make 2>&1 | tee $OUTPUT/make-${PRGNAM}_xvid.log
# Install xvidcore into a temp location so ffmpeg can pickup the library
make install DESTDIR=$TMP/tmp-$PRGNAM/ffmpegdeps \
  2>&1 | tee -a $OUTPUT/make-${PRGNAM}_xvid.log
cd -
}

# -----------------------------------------------------------------------------
# Compile faac library
# The ffmpeg will use these
# -----------------------------------------------------------------------------
make_faac()
{
echo -e "**\n**  faac ...\n**"
mv $TMP/tmp-$PRGNAM/faac $TMP/tmp-$PRGNAM/faac-${FAAC}
cd $TMP/tmp-$PRGNAM/faac-${FAAC}
sh bootstrap
CFLAGS="$SLKCFLAGS" \
CXXFLAGS="$SLKCFLAGS" \
LDFLAGS="$SLKLDFLAGS" \
./configure --prefix=/usr \
            --enable-static \
            --disable-shared \
            --program-prefix="" \
            --program-suffix="" \
            --build=$ARCH-slackware-linux \
            2>&1 | tee $OUTPUT/configure-${PRGNAM}_faac.log
make 2>&1 | tee $OUTPUT/make-${PRGNAM}_faac.log
# Install faac into a temp location so ffmpeg can pickup the library
make install DESTDIR=$TMP/tmp-$PRGNAM/ffmpegdeps \
  2>&1 | tee -a $OUTPUT/make-${PRGNAM}_faac.log
cd -
}

# -----------------------------------------------------------------------------
# Compile faad2
# -----------------------------------------------------------------------------
make_faad2()
{
echo -e "**\n**  faad2 ...\n**"
mv $TMP/tmp-$PRGNAM/faad2 $TMP/tmp-$PRGNAM/faad2-${FAAD2}
cd $TMP/tmp-$PRGNAM/faad2-${FAAD2}
#patch -p1 < $SRCDIR/faad2-remove-bmp.patch
autoreconf -vif
CFLAGS="$SLKCFLAGS" \
CXXFLAGS="$SLKCFLAGS" \
LDFLAGS="$SLKLDFLAGS" \
./configure --prefix=/usr \
            --with-drm \
            --with-mp4v2 \
            --without-xmms \
            --enable-static \
            --disable-shared \
            --program-prefix="" \
            --program-suffix="" \
            --build=$ARCH-slackware-linux \
            2>&1 | tee $OUTPUT/configure-${PRGNAM}_faad2.log
make 2>&1 | tee $OUTPUT/make-${PRGNAM}_faad2.log
# Install faad2 into a temp location so ffmpeg can pickup the library
make install DESTDIR=$TMP/tmp-$PRGNAM/ffmpegdeps \
  2>&1 | tee -a $OUTPUT/make-${PRGNAM}_faad2.log
cd -
}
# -----------------------------------------------------------------------------
# Compile a52 libraries
# -----------------------------------------------------------------------------
make_a52()
{
echo -e "**\n**  a52 ...\n**"
cd $TMP/tmp-$PRGNAM/a52dec-${A52}
CFLAGS="$SLKCFLAGS" \
CXXFLAGS="$SLKCFLAGS" \
LDFLAGS="$SLKLDFLAGS" \
./configure --prefix=/usr \
            --enable-static \
            --disable-shared \
            --libdir=/usr/lib${LIBDIRSUFFIX} \
            --program-prefix="" \
            --program-suffix="" \
            --build=$ARCH-slackware-linux \
            2>&1 | tee $OUTPUT/configure-${PRGNAM}_a52.log
make 2>&1 | tee $OUTPUT/make-${PRGNAM}_a52.log
# Install a52 into a temp location so ffmpeg can pickup the library
make install DESTDIR=$TMP/tmp-$PRGNAM/ffmpegdeps \
  2>&1 | tee -a $OUTPUT/make-${PRGNAM}_a52.log
cd -
}

# -----------------------------------------------------------------------------
# Compile x264
# -----------------------------------------------------------------------------
make_x264()
{
echo -e "**\n**  x264  ...\n**"
mv $TMP/tmp-$PRGNAM/x264-snapshot-${X264} $TMP/tmp-$PRGNAM/x264-${X264}
cd $TMP/tmp-$PRGNAM/x264-${X264}
CFLAGS="$SLKCFLAGS" \
CXXFLAGS="$SLKCFLAGS" \
LDFLAGS="$SLKLDFLAGS" \
./configure --prefix=/usr \
  2>&1 | tee $OUTPUT/configure-${PRGNAM}_x264.log
make  2>&1 | tee $OUTPUT/make-${PRGNAM}_x264.log
# Install x264 into a temp location so ffmpeg can pickup the library
make install DESTDIR=$TMP/tmp-$PRGNAM/ffmpegdeps \
  2>&1 | tee -a $OUTPUT/make-${PRGNAM}_x264.log
cd -
}

# -----------------------------------------------------------------------------
# Compile gsm
# -----------------------------------------------------------------------------
make_gsm()
{
echo -e "**\n**  gsm  ...\n**"
GSMMAJ=$(echo $GSM | cut -d. -f1,2)
GSMPL=$(echo $GSM | cut -d. -f3)
mv $TMP/tmp-$PRGNAM/gsm-${GSMMAJ}-pl${GSMPL} $TMP/tmp-$PRGNAM/gsm-${GSM}
cd $TMP/tmp-$PRGNAM/gsm-${GSM}
CFLAGS="$SLKCFLAGS" \
CXXFLAGS="$SLKCFLAGS" \
LDFLAGS="$SLKLDFLAGS" \
make  2>&1 | tee $OUTPUT/make-${PRGNAM}_gsm.log
# Install gsm into a temp location so ffmpeg can pickup the library
make install 2>&1 | tee -a $OUTPUT/make-${PRGNAM}_gsm.log
mkdir -p $TMP/tmp-$PRGNAM/ffmpegdeps/usr/{bin,include,lib}
cp bin/* $TMP/tmp-$PRGNAM/ffmpegdeps/usr/bin/
cp inc/gsm.h $TMP/tmp-$PRGNAM/ffmpegdeps/usr/include/
cp lib/* $TMP/tmp-$PRGNAM/ffmpegdeps/usr/lib/
cd -
}

# -----------------------------------------------------------------------------
# Compile ffmpeg with support for -
#   LAME, XVID, FAAC, FAAD2 , A52 (AC3), X264, GSM
# -----------------------------------------------------------------------------
make_ffmpeg()
{
echo -e "**\n**  ffmpeg ...\n**"
OLDDIR=`pwd`
cd $TMP/tmp-$PRGNAM
# Take care of snaphot directory:
if [ -d ffmpeg-export-* ]; then
  rm -rf ffmpeg-${VERSION}
  mv ffmpeg-export-* ffmpeg-${VERSION}
fi

# Only use patented code if we are allowing it:
if [ "${USE_PATENTS}" == "YES" ]; then
  USE_PATENTED="--enable-libmp3lame --enable-libamr-nb --enable-libamr-wb"
else
  USE_PATENTED=" "
fi

cd ffmpeg-${VERSION}
CFLAGS="$SLKCFLAGS" \
CXXFLAGS="$SLKCFLAGS" \
LDFLAGS="$SLKLDFLAGS" \
./configure --prefix=/usr \
            --mandir=/usr/man \
            ${USE_PATENTED} \
            --enable-libvorbis \
            --enable-libtheora \
            --enable-libfaac \
            --enable-libfaad \
            --enable-liba52 \
            --enable-libx264 \
            --enable-libxvid \
            --enable-libgsm \
            --enable-swscaler \
            --enable-gpl \
            --enable-pp \
            --enable-pthreads \
            --enable-memalign-hack \
            --enable-x11grab \
            --disable-debug \
            --disable-shared \
            --enable-static \
            --log=$OUTPUT/ffmpeg_conf.log \
            --extra-cflags="-I`pwd`/../ffmpegdeps/usr/include" \
            --extra-ldflags="-L`pwd`/../ffmpegdeps/usr/lib" \
            2>&1 | tee $OUTPUT/configure-${PRGNAM}_ffmpeg.log
            # --enable-libogg \ No longer needed
make 2>&1 | tee $OUTPUT/make-${PRGNAM}_ffmpeg.log
cd $OLDDIR
}

#
# OK, we packaged the compile process for the various software libraries
# into convenient functions... let's call them one by one now:
#

# Needed before ffmpeg:
# Based on the value of $USE_PATENTS enable or disable patented code:
if [ "${USE_PATENTS}" = "YES" ]; then
  make_lame
  make_amrnb
  make_amrwb
fi

make_xvid
make_faac
make_faad2
make_a52
make_x264
make_gsm

# ffmpeg uses the above static libraries:
make_ffmpeg

# End of compilation, proceed to packaging the binaries:
cd $TMP/tmp-${PRGNAM}/${PRGNAM}-${VERSION}

# Install all the needed stuff to the package dir
# Use installwatch if available, to produce a logfile of the installation
# process that is more easily readable:
if `which installwatch  > /dev/null 2>&1`; then
  installwatch -o $OUTPUT/install-${PRGNAM}.log make DESTDIR=$PKG install
else
  make DESTDIR=$PKG install 2>&1 |tee $OUTPUT/install-${PRGNAM}.log
fi

# Add  documentation:
mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION/{a52dec,amrnb,amrwb,faac,faad2,gsm,lame,x264,xvidcore}
cp -a $DOCS $PKG/usr/doc/$PRGNAM-$VERSION || true
# And the included libraries:
( cd ../a52dec-${A52}
  cp -a $DOCS_A52 $PKG/usr/doc/$PRGNAM-$VERSION/a52dec || true
)
( cd ../amrnb-${AMRNB}
  cp -a $DOCS_AMRNB $PKG/usr/doc/$PRGNAM-$VERSION/amrnb || true
)
( cd ../amrwb-${AMRWB}
  cp -a $DOCS_AMRWB $PKG/usr/doc/$PRGNAM-$VERSION/amrwb || true
)
( cd ../faac-${FAAC}
  cp -a $DOCS_FAAC $PKG/usr/doc/$PRGNAM-$VERSION/faac || true
)
( cd ../faad2-${FAAD2}
  cp -a $DOCS_FAAD2 $PKG/usr/doc/$PRGNAM-$VERSION/faad2 || true
)
( cd ../gsm-${GSM}
  cp -a $DOCS_GSM $PKG/usr/doc/$PRGNAM-$VERSION/gsm || true
)
( cd ../x264-${X264}
  cp -a $DOCS_X264 $PKG/usr/doc/$PRGNAM-$VERSION/x264 || true
)
( cd ../xvidcore-${XVID}
  cp -a $DOCS_XVID $PKG/usr/doc/$PRGNAM-$VERSION/xvidcore || true
)
[ "${USE_PATENTS}" = "YES" ] && ( cd ../lame-${LAME}
  cp -a $DOCS_LAME $PKG/usr/doc/$PRGNAM-$VERSION/lame || true
)

# Compress the man page(s)
if [ -d $PKG/usr/man ]; then
  find $PKG/usr/man -type f -name "*.?" -exec gzip -9f {} \;
  for i in `find $PKG/usr/man -type l -name "*.?"` ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
fi

# Strip binaries
cd $PKG
find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
cd -

# Add package description:
mkdir -p $PKG/install
cat $SRCDIR/slack-desc > $PKG/install/slack-desc
if [ -f $SRCDIR/doinst.sh ]; then
  cat $SRCDIR/doinst.sh >> $PKG/install/doinst.sh
fi

# Build the package:
cd $PKG
makepkg --linkadd y --chown n $OUTPUT/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}.tgz 2>&1 | tee $OUTPUT/makepkg-${PRGNAM}.log
cd $OUTPUT
md5sum ${PRGNAM}-${VERSION}-${ARCH}-${BUILD}.tgz > ${PRGNAM}-${VERSION}-${ARCH}-${BUILD}.tgz.md5
cd -
cat $PKG/install/slack-desc | grep "^${PRGNAM}" > $OUTPUT/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}.txt

# Clean up the extra stuff:
if [ "$P1" = "--cleanup" ]; then
  rm -rf $TMP/tmp-$PRGNAM
  rm -rf $PKG
fi