diff options
Diffstat (limited to 'openconnect/build')
-rwxr-xr-x | openconnect/build/openconnect.SlackBuild | 253 | ||||
-rw-r--r-- | openconnect/build/slack-desc | 19 |
2 files changed, 272 insertions, 0 deletions
diff --git a/openconnect/build/openconnect.SlackBuild b/openconnect/build/openconnect.SlackBuild new file mode 100755 index 00000000..6ff8edad --- /dev/null +++ b/openconnect/build/openconnect.SlackBuild @@ -0,0 +1,253 @@ +#!/bin/sh +# $Id$ +# Copyright 2017 Eric Hameleers, Eindhoven, NL +# All rights reserved. +# +# Permission to use, copy, modify, and distribute this software for +# any purpose with or without fee is hereby granted, provided that +# the above copyright notice and this permission notice appear in all +# copies. +# +# THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +# IN NO EVENT SHALL THE AUTHORS AND COPYRIGHT HOLDERS AND THEIR +# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF +# USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND +# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +# OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT +# OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF +# SUCH DAMAGE. +# ----------------------------------------------------------------------------- +# +# Slackware SlackBuild script +# =========================== +# By: Eric Hameleers <alien@slackware.com> +# For: openconnect +# Descr: SSL VPN Client +# URL: http://www.infradead.org/openconnect.html +# Build needs: +# Needs: +# Changelog: +# 7.08-1: 09/jun/2017 by Eric Hameleers <alien@slackware.com> +# * Initial build. +# +# Run 'sh openconnect.SlackBuild' to build a Slackware package. +# The package (.t?z) and .txt file as well as build logs are created in /tmp . +# Install the package using 'installpkg' or 'upgradepkg --install-new'. +# +# ----------------------------------------------------------------------------- + +PRGNAM=openconnect +VERSION=${VERSION:-7.08} +BUILD=${BUILD:-1} +NUMJOBS=${NUMJOBS:-" -j4 "} +TAG=${TAG:-alien} + +DOCS="AUTHORS COPYING* TODO" + +# Where do we look for sources? +SRCDIR=$(cd $(dirname $0); pwd) + +# Place to build (TMP) package (PKG) and output (OUTPUT) the program: +TMP=${TMP:-/tmp/build} +PKG=$TMP/package-$PRGNAM +OUTPUT=${OUTPUT:-/tmp} + +SOURCE[0]="$SRCDIR/${PRGNAM}-${VERSION}.tar.gz" +SRCURL[0]="ftp://ftp.infradead.org/pub/${PRGNAM}/${PRGNAM}-${VERSION}.tar.gz" + +# Always use the latest vpnc-script: +SOURCE[1]="$SRCDIR/vpnc-script" +SRCURL[1]="http://git.infradead.org/users/dwmw2/vpnc-scripts.git/blob_plain/HEAD:/vpnc-script" + +## +## --- with a little luck, you won't have to edit below this point --- ## +## + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$(uname -m)" in + i?86) ARCH=i486 ;; + arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7hl ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) ARCH=$(uname -m) ;; + esac + export ARCH +fi + +# Set CFLAGS/CXXFLAGS and LIBDIRSUFFIX: +case "$ARCH" in + i?86) SLKCFLAGS="-O2 -march=${ARCH} -mtune=i686" + SLKLDFLAGS=""; LIBDIRSUFFIX="" + ;; + x86_64) SLKCFLAGS="-O2 -fPIC" + SLKLDFLAGS="-L/usr/lib64"; LIBDIRSUFFIX="64" + ;; + armv7hl) SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16" + SLKLDFLAGS=""; LIBDIRSUFFIX="" + ;; + *) SLKCFLAGS=${SLKCFLAGS:-"-O2"} + SLKLDFLAGS=${SLKLDFLAGS:-""}; LIBDIRSUFFIX=${LIBDIRSUFFIX:-""} + ;; +esac + +case "$ARCH" in + arm*) TARGET=$ARCH-slackware-linux-gnueabi ;; + *) TARGET=$ARCH-slackware-linux ;; +esac + +# Exit the script on errors: +set -e +trap 'echo "$0 FAILED at line ${LINENO}" | tee $OUTPUT/error-${PRGNAM}.log' ERR +# Catch unitialized variables: +set -u +P1=${1:-1} + +# Save old umask and set to 0022: +_UMASK_=$(umask) +umask 0022 + +# Create working directories: +mkdir -p $OUTPUT # place for the package to be saved +mkdir -p $TMP/tmp-$PRGNAM # location to build the source +mkdir -p $PKG # place for the package to be built +rm -rf $PKG/* # always erase old package's contents +rm -rf $TMP/tmp-$PRGNAM/* # remove the remnants of previous build +rm -rf $OUTPUT/{checkout,configure,make,install,error,makepkg,patch}-$PRGNAM.log + # remove old log files + +# Source file availability: +for (( i = 0; i < ${#SOURCE[*]}; i++ )) ; do + if ! [ -f ${SOURCE[$i]} ]; then + echo "Source '$(basename ${SOURCE[$i]})' not available yet..." + # Check if the $SRCDIR is writable at all - if not, download to $OUTPUT + [ -w "$SRCDIR" ] || SOURCE[$i]="$OUTPUT/$(basename ${SOURCE[$i]})" + if [ -f ${SOURCE[$i]} ]; then echo "Ah, found it!"; continue; fi + if ! [ "x${SRCURL[$i]}" == "x" ]; then + echo "Will download file to $(dirname $SOURCE[$i])" + wget -nv -T 20 -O "${SOURCE[$i]}" "${SRCURL[$i]}" || true + if [ $? -ne 0 -o ! -s "${SOURCE[$i]}" ]; then + echo "Fail to download '$(basename ${SOURCE[$i]})'. Aborting the build." + mv -f "${SOURCE[$i]}" "${SOURCE[$i]}".FAIL + exit 1 + fi + else + echo "File '$(basename ${SOURCE[$i]})' not available. Aborting the build." + exit 1 + fi + fi +done + +if [ "$P1" == "--download" ]; then + echo "Download complete." + exit 0 +fi + +# --- PACKAGE BUILDING --- + +echo "++" +echo "|| $PRGNAM-$VERSION" +echo "++" + +cd $TMP/tmp-$PRGNAM +echo "Extracting the source archive(s) for $PRGNAM..." +tar -xvf ${SOURCE[0]} +cd ${PRGNAM}-${VERSION} +chown -R root:root . +chmod -R u+w,go+r-w,a+rX-st . + +echo Building ... +LDFLAGS="$SLKLDFLAGS" \ +CXXFLAGS="$SLKCFLAGS" \ +CFLAGS="$SLKCFLAGS" \ +./configure \ + --prefix=/usr \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --mandir=/usr/man \ + --docdir=/usr/doc/$PRGNAM-$VERSION \ + --localstatedir=/var \ + --sysconfdir=/etc \ + --with-vpnc-script=/etc/vpnc/vpnc-script \ + --program-prefix= \ + --program-suffix= \ + --build=$TARGET \ + 2>&1 | tee $OUTPUT/configure-${PRGNAM}.log + +make $NUMJOBS 2>&1 | tee $OUTPUT/make-${PRGNAM}.log +make DESTDIR=$PKG install 2>&1 | tee $OUTPUT/install-${PRGNAM}.log + +# Install the VPN script manually, with a .new extension: +mkdir -p $PKG/etc/vpnc +cat ${SOURCE[1]} > $PKG/etc/vpnc/vpnc-script.new +chmod 0755 $PKG/etc/vpnc/vpnc-script.new + +# Add this to the doinst.sh: +mkdir -p $PKG/install +cat <<EOINS >> $PKG/install/doinst.sh +# Handle the incoming configuration files: +config() { + for infile in \$1; do + NEW="\$infile" + OLD="\`dirname \$NEW\`/\`basename \$NEW .new\`" + # If there's no config file by that name, mv it over: + if [ ! -r \$OLD ]; then + mv \$NEW \$OLD + elif [ "\`cat \$OLD | md5sum\`" = "\`cat \$NEW | md5sum\`" ]; then + # toss the redundant copy + rm \$NEW + fi + # Otherwise, we leave the .new copy for the admin to consider... + done +} + +preserve_perms() { + NEW="\$1" + OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)" + if [ -e \$OLD ]; then + cp -a \$OLD \${NEW}.incoming + cat \$NEW > \${NEW}.incoming + mv \${NEW}.incoming \$NEW + fi + config \$NEW +} + +# Keep same perms as pre-existing vpnc-script: +preserve_perms etc/vpnc/vpnc-script.new + +EOINS + +# Add documentation: +mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +cp -a $DOCS $PKG/usr/doc/$PRGNAM-$VERSION || true +cat $SRCDIR/$(basename $0) > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild +chown -R root:root $PKG/usr/doc/$PRGNAM-$VERSION +find $PKG/usr/doc -type f -exec chmod 644 {} \; + +# Compress the man page(s): +if [ -d $PKG/usr/man ]; then + find $PKG/usr/man -type f -name "*.?" -exec gzip -9f {} \; + for i in $(find $PKG/usr/man -type l -name "*.?") ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done +fi + +# Strip binaries (if any): +find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ + | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true + +# Add a package description: +mkdir -p $PKG/install +cat $SRCDIR/slack-desc > $PKG/install/slack-desc + +# Build the package: +cd $PKG +makepkg --linkadd y --chown n $OUTPUT/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.${PKGTYPE:-tgz} 2>&1 | tee $OUTPUT/makepkg-${PRGNAM}.log +cd $OUTPUT +md5sum ${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.${PKGTYPE:-tgz} > ${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.${PKGTYPE:-tgz}.md5 +cd - +cat $PKG/install/slack-desc | grep "^${PRGNAM}" > $OUTPUT/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.txt + +# Restore the original umask: +umask ${_UMASK_} + diff --git a/openconnect/build/slack-desc b/openconnect/build/slack-desc new file mode 100644 index 00000000..6cca0315 --- /dev/null +++ b/openconnect/build/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':' except on otherwise blank lines. + + |-----handy-ruler------------------------------------------------------| +openconnect: openconnect (SSL VPN Client) +openconnect: +openconnect: OpenConnect is an SSL VPN client initially created to support Cisco's +openconnect: AnyConnect SSL VPN. It has since been ported to support the Juniper +openconnect: SSL VPN which is now known as Pulse Connect Secure. +openconnect: Like vpnc, OpenConnect is not officially supported by, or associated +openconnect: in any way with, Cisco Systems, Juniper Networks or Pulse Secure. +openconnect: It just happens to interoperate with their equipment. +openconnect: +openconnect: openconnect home: http://www.infradead.org/openconnect.html +openconnect: |