Initial revision

4 files changed, 364 insertions, 0 deletions

diff --git a/redis/build/rc.redis b/redis/build/rc.redis
new file mode 100644
index 00000000..3bf698da
--- /dev/null
+++ b/redis/build/rc.redis
@@ -0,0 +1,61 @@
+#!/bin/bash
+#
+# Redis startup script for Slackware Linux
+
+PORT=6379
+SERV=/usr/bin/redis-server
+CLI=/usr/bin/redis-cli
+PIDFILE=/var/run/redis_${PORT}.pid
+CONF=/etc/redis/redis.conf
+
+redis_start() {
+  if [ ! -r $CONF ]; then
+    echo "$CONF does not appear to exist.  Abort."
+    exit 1
+  fi
+
+  if [ -s $PIDFILE ]; then
+    echo "Redis appears to be already running?"
+    exit 1
+  fi
+
+  echo "Starting Redis server..."
+  $SERV $CONF
+}
+
+redis_stop() {
+  if [ ! -s $PIDFILE ]; then
+    echo "$PIDFILE does not exist or is empty."
+    exit 1
+  fi
+
+  PID=$(cat $PIDFILE)
+  echo -n "Stopping Redis server..."
+  $CLI -p $PORT shutdown
+  while [ -d /proc/$PID ]; do
+    sleep 1
+    echo -n "."
+  done
+  echo " done"
+}
+
+redis_restart() {
+  redis_stop
+  sleep 3
+  redis_start
+}
+
+case "$1" in
+  start)
+    redis_start
+    ;;
+  stop)
+    redis_stop
+    ;;
+  restart)
+    redis_restart
+    ;;
+  *)
+    echo "Usage: $0 {start|stop|restart}"
+    exit 1
+esac
diff --git a/redis/build/redis.SlackBuild b/redis/build/redis.SlackBuild
new file mode 100755
index 00000000..a315968b
--- /dev/null
+++ b/redis/build/redis.SlackBuild
@@ -0,0 +1,275 @@
+#!/bin/sh
+# $Id$
+# Copyright 2010  Kuroi Kenshi <kuroi_kenshi96@yahoo.com>
+# Copyright 2012-2018  Audrius Kaukauskas <audrius@neutrino.lt>
+# Copyright 2022  Eric Hameleers, Eindhoven, NL
+# All rights reserved.
+#
+#   Permission to use, copy, modify, and distribute this software for
+#   any purpose with or without fee is hereby granted, provided that
+#   the above copyright notice and this permission notice appear in all
+#   copies.
+#
+#   THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED
+#   WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#   MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+#   IN NO EVENT SHALL THE AUTHORS AND COPYRIGHT HOLDERS AND THEIR
+#   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+#   USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+#   ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+#   OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+#   OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+#   SUCH DAMAGE.
+# -----------------------------------------------------------------------------
+#
+# Slackware SlackBuild script 
+# ===========================
+# By:          Eric Hameleers <alien@slackware.com>
+# For:         redis
+# Descr:       in-memory key-value store
+# URL:         https://redis.io/
+# Build needs: 
+# Needs:       
+# Changelog:   
+# 6.2.6-1:     24/jan/2022 by Eric Hameleers <alien@slackware.com>
+#              * Initial build.
+# 
+# Run 'sh redis.SlackBuild' to build a Slackware package.
+# The package (.t?z) and .txt file as well as build logs are created in /tmp .
+# Install the package using 'installpkg' or 'upgradepkg --install-new'.
+#
+# -----------------------------------------------------------------------------
+
+PRGNAM=redis
+VERSION=${VERSION:-6.2.6}
+BUILD=${BUILD:-1}
+NUMJOBS=${NUMJOBS:-" -j$(nproc) "}
+TAG=${TAG:-alien}
+
+DOCS="00-RELEASENOTES BUGS CONDUCT CONTRIBUTING COPYING \
+  INSTALL MANIFESTO README.md TLS.md"
+
+# Where do we look for sources?
+SRCDIR=$(cd $(dirname $0); pwd)
+
+# Place to build (TMP) package (PKG) and output (OUTPUT) the program:
+TMP=${TMP:-/tmp/build}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+SOURCE="$SRCDIR/${PRGNAM}-${VERSION}.tar.gz"
+SRCURL="http://download.redis.io/releases/${PRGNAM}-${VERSION}.tar.gz"
+
+##
+## --- with a little luck, you won't have to edit below this point --- ##
+##
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$(uname -m)" in
+    i?86) ARCH=i586 ;;
+    arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7hl ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *) ARCH=$(uname -m) ;;
+  esac
+  export ARCH
+fi
+# Set CFLAGS/CXXFLAGS and LIBDIRSUFFIX:
+case "$ARCH" in
+  i?86)      SLKCFLAGS="-O2 -march=${ARCH} -mtune=i686"
+             SLKLDFLAGS=""; LIBDIRSUFFIX=""
+             ;;
+  x86_64)    SLKCFLAGS="-O2 -fPIC"
+             SLKLDFLAGS="-L/usr/lib64"; LIBDIRSUFFIX="64"
+             ;;
+  armv7hl)   SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
+             SLKLDFLAGS=""; LIBDIRSUFFIX=""
+             ;;
+  *)         SLKCFLAGS=${SLKCFLAGS:-"-O2"}
+             SLKLDFLAGS=${SLKLDFLAGS:-""}; LIBDIRSUFFIX=${LIBDIRSUFFIX:-""}
+             ;;
+esac
+
+case "$ARCH" in
+    arm*)    TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)       TARGET=$ARCH-slackware-linux ;;
+esac
+
+# Exit the script on errors:
+set -e
+trap 'echo "$0 FAILED at line ${LINENO}" | tee $OUTPUT/error-${PRGNAM}.log' ERR
+# Catch unitialized variables:
+set -u
+P1=${1:-1}
+
+# Save old umask and set to 0022:
+_UMASK_=$(umask)
+umask 0022
+
+# Create working directories:
+mkdir -p $OUTPUT          # place for the package to be saved
+mkdir -p $TMP/tmp-$PRGNAM # location to build the source
+mkdir -p $PKG             # place for the package to be built
+rm -rf $PKG/*             # always erase old package's contents
+rm -rf $TMP/tmp-$PRGNAM/* # remove the remnants of previous build
+rm -rf $OUTPUT/{checkout,configure,make,install,error,makepkg,patch}-$PRGNAM.log
+                          # remove old log files
+
+# Source file availability:
+if ! [ -f ${SOURCE} ]; then
+  echo "Source '$(basename ${SOURCE})' not available yet..."
+  # Check if the $SRCDIR is writable at all - if not, download to $OUTPUT
+  [ -w "$SRCDIR" ] || SOURCE="$OUTPUT/$(basename $SOURCE)"
+  if [ -f ${SOURCE} ]; then echo "Ah, found it!"; continue; fi
+  if ! [ "x${SRCURL}" == "x" ]; then
+    echo "Will download file to $(dirname $SOURCE)"
+    wget --no-check-certificate -nv -T 20 -O "${SOURCE}" "${SRCURL}" || true
+    if [ $? -ne 0 -o ! -s "${SOURCE}" ]; then
+      echo "Downloading '$(basename ${SOURCE})' failed... aborting the build."
+      mv -f "${SOURCE}" "${SOURCE}".FAIL
+      exit 1
+    fi
+  else
+    echo "File '$(basename ${SOURCE})' not available... aborting the build."
+    exit 1
+  fi
+fi
+
+if [ "$P1" == "--download" ]; then
+  echo "Download complete."
+  exit 0
+fi
+
+# --- PACKAGE BUILDING ---
+
+echo "++"
+echo "|| $PRGNAM-$VERSION"
+echo "++"
+
+cd $TMP/tmp-$PRGNAM
+echo "Extracting the source archive(s) for $PRGNAM..."
+tar -xvf ${SOURCE}
+cd ${PRGNAM}-${VERSION}
+
+# This messes with Slackware's CFLAGS:
+sed -e "s|-O3||" -i deps/Makefile deps/hiredis/Makefile
+
+chown -R root:root .
+chmod -R u+w,go+r-w,a+rX-st .
+
+echo Building ...
+export LDFLAGS="$SLKLDFLAGS"
+export CXXFLAGS="$SLKCFLAGS"
+export CFLAGS="$SLKCFLAGS"
+
+make $NUMJOBS  PREFIX=/usr MANDIR=/usr/man 2>&1 | tee $OUTPUT/make-${PRGNAM}.log
+make install PREFIX=$PKG/usr MANDIR=$PKG/usr/man DESTDIR=$PKG install \
+  2>&1 | tee $OUTPUT/install-${PRGNAM}.log
+
+# Add this to the doinst.sh:
+mkdir -p $PKG/install
+cat <<EOINS >> $PKG/install/doinst.sh
+# Handle the incoming configuration files:
+config() {
+  for infile in \$1; do
+    NEW="\$infile"
+    OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
+    # If there's no config file by that name, mv it over:
+    if [ ! -r \$OLD ]; then
+      mv \$NEW \$OLD
+    elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then
+      # toss the redundant copy
+      rm \$NEW
+    fi
+    # Otherwise, we leave the .new copy for the admin to consider...
+  done
+}
+
+preserve_perms() {
+  NEW="\$1"
+  OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
+  if [ -e \$OLD ]; then
+    cp -a \$OLD \${NEW}.incoming
+    cat \$NEW > \${NEW}.incoming
+    mv \${NEW}.incoming \$NEW
+  fi
+  config \$NEW
+}
+
+config etc/redis/redis.conf.new
+config etc/redis/sentinel.conf.new
+config etc/logrotate.d/redis.new
+preserve_perms etc/rc.d/rc.redis.new
+
+# Update rc.local so that Redis daemon will be started on boot:
+if ! grep "rc.redis" etc/rc.d/rc.local 1>/dev/null 2>&1 ; then
+  cat <<_EOM_ >> etc/rc.d/rc.local
+
+if [ -x /etc/rc.d/rc.redis ]; then
+  # Start Redis daemon
+  echo "Starting Redis daemon:    /etc/rc.d/rc.redis start"
+  /etc/rc.d/rc.redis start
+fi
+_EOM_
+fi
+
+EOINS
+
+# Use sample config and set some sane defaults:
+install -D -m0644 redis.conf $PKG/etc/redis/redis.conf.new
+sed \
+  -e 's|^daemonize no|daemonize yes|' \
+  -e 's|^dir \.|dir /var/lib/redis|' \
+  -e 's|^logfile ""|logfile /var/log/redis/redis.log|' \
+  -i $PKG/etc/redis/redis.conf.new
+install -D -m 0644 sentinel.conf $PKG/etc/redis/sentinel.conf.new
+
+# Create data directory:
+mkdir -p $PKG/var/lib/redis
+chmod 0700 $PKG/var/lib/redis
+
+# Create log directory:
+mkdir -p $PKG/var/log/redis
+
+# Install init script.
+mkdir -p $PKG/etc/rc.d
+cat $SRCDIR/rc.redis > $PKG/etc/rc.d/rc.redis.new
+
+# Install logrotate script.
+mkdir -p $PKG/etc/logrotate.d
+cat $SRCDIR/redis.logrotate > $PKG/etc/logrotate.d/redis.new
+
+# Add documentation:
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a $DOCS $PKG/usr/doc/$PRGNAM-$VERSION || true
+cat $SRCDIR/$(basename $0) > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+chown -R root:root $PKG/usr/doc/$PRGNAM-$VERSION
+find $PKG/usr/doc -type f -exec chmod 644 {} \;
+
+# Compress the man page(s):
+if [ -d $PKG/usr/man ]; then
+  find $PKG/usr/man -type f -name "*.?" -exec gzip -9f {} \;
+  for i in $(find $PKG/usr/man -type l -name "*.?") ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+fi
+
+# Strip binaries (if any):
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+# Add a package description:
+mkdir -p $PKG/install
+cat $SRCDIR/slack-desc > $PKG/install/slack-desc
+
+# Build the package:
+cd $PKG
+makepkg --linkadd y --chown n $OUTPUT/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.${PKGTYPE:-txz} 2>&1 | tee $OUTPUT/makepkg-${PRGNAM}.log
+cd $OUTPUT
+md5sum ${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.${PKGTYPE:-txz} > ${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.${PKGTYPE:-txz}.md5
+cd -
+cat $PKG/install/slack-desc | grep "^${PRGNAM}" > $OUTPUT/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.txt
+
+# Restore the original umask:
+umask ${_UMASK_}
+
diff --git a/redis/build/redis.logrotate b/redis/build/redis.logrotate
new file mode 100644
index 00000000..12e6ea89
--- /dev/null
+++ b/redis/build/redis.logrotate
@@ -0,0 +1,9 @@
+/var/log/redis/redis.log {
+    daily
+    rotate 7
+    copytruncate
+    delaycompress
+    compress
+    notifempty
+    missingok
+}
diff --git a/redis/build/slack-desc b/redis/build/slack-desc
new file mode 100644
index 00000000..2b966bb3
--- /dev/null
+++ b/redis/build/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+     |-----handy-ruler------------------------------------------------------|
+redis: redis (in-memory key-value store)
+redis:
+redis: Redis is an advanced key-value store.  It is similar to memcached but
+redis: the dataset is not volatile, and values can be strings, exactly like
+redis: in memcached, but also lists, sets, and ordered sets.  These data
+redis: types can be manipulated with atomic operations to push/pop elements,
+redis: add/remove elements, perform server side union, intersection,
+redis: Records are organized in hash table, B+ tree, or a fixed-length array.
+redis: Redis supports different kinds of sorting abilities.
+redis:
+redis: See also: https://redis.io/