Initial revision

2 files changed, 231 insertions, 0 deletions

diff --git a/jansson/build/jansson.SlackBuild b/jansson/build/jansson.SlackBuild
new file mode 100755
index 00000000..46c57c7e
--- /dev/null
+++ b/jansson/build/jansson.SlackBuild
@@ -0,0 +1,212 @@
+#!/bin/sh
+# $Id$
+# Copyright 2015  Eric Hameleers, Eindhoven, NL
+# All rights reserved.
+#
+#   Permission to use, copy, modify, and distribute this software for
+#   any purpose with or without fee is hereby granted, provided that
+#   the above copyright notice and this permission notice appear in all
+#   copies.
+#
+#   THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED
+#   WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#   MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+#   IN NO EVENT SHALL THE AUTHORS AND COPYRIGHT HOLDERS AND THEIR
+#   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+#   USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+#   ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+#   OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+#   OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+#   SUCH DAMAGE.
+# -----------------------------------------------------------------------------
+#
+# Slackware SlackBuild script 
+# ===========================
+# By:          Eric Hameleers <alien@slackware.com>
+# For:         jansson
+# Descr:       C library for encoding, decoding and manipulating JSON data
+# URL:         http://www.digip.org/jansson/
+# Build needs: 
+# Needs:       
+# Changelog:   
+# 2.7-1:       27/May/2015 by Eric Hameleers <alien@slackware.com>
+#              * Initial build.
+# 
+# Run 'sh jansson.SlackBuild' to build a Slackware package.
+# The package (.t?z) and .txt file as well as build logs are created in /tmp .
+# Install the package using 'installpkg' or 'upgradepkg --install-new'.
+#
+# -----------------------------------------------------------------------------
+
+PRGNAM=jansson
+VERSION=${VERSION:-2.7}
+BUILD=${BUILD:-1}
+NUMJOBS=${NUMJOBS:-" -j4 "}
+TAG=${TAG:-alien}
+
+DOCS="LICENSE"
+
+# Where do we look for sources?
+SRCDIR=$(cd $(dirname $0); pwd)
+
+# Place to build (TMP) package (PKG) and output (OUTPUT) the program:
+TMP=${TMP:-/tmp/build}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+SOURCE="$SRCDIR/${PRGNAM}-${VERSION}.tar.bz2"
+SRCURL="http://www.digip.org/${PRGNAM}/releases/${PRGNAM}-${VERSION}.tar.bz2"
+
+##
+## --- with a little luck, you won't have to edit below this point --- ##
+##
+
+# You can use your own private machine.conf file to overrule machine defaults:
+if [ -e $SRCDIR/machine.conf ]; then
+  . $SRCDIR/machine.conf
+elif [ -e /etc/slackbuild/machine.conf ]; then
+  . /etc/slackbuild/machine.conf
+else
+  # Automatically determine the architecture we're building on:
+  MARCH=$( uname -m )
+  if [ -z "$ARCH" ]; then
+    case "$MARCH" in
+      i?86)    export ARCH=i486 ;;
+      armv7hl) export ARCH=$MARCH ;;
+      armv6hl) export ARCH=$MARCH ;;
+      armv5hl) export ARCH=$MARCH ;;
+      arm*)    export ARCH=arm ;;
+      # Unless $ARCH is already set, use uname -m for all other archs:
+      *)       export ARCH=$MARCH ;;
+    esac
+  fi
+  # Set CFLAGS/CXXFLAGS and LIBDIRSUFFIX:
+  case "$ARCH" in
+    i486)      SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+               SLKLDFLAGS=""; LIBDIRSUFFIX=""
+               ;;
+    x86_64)    SLKCFLAGS="-O2 -fPIC"
+               SLKLDFLAGS="-L/usr/lib64"; LIBDIRSUFFIX="64"
+               ;;
+    armv7hl)   SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
+               SLKLDFLAGS=""; LIBDIRSUFFIX=""
+               ;;
+    armv6hl)   SLKCFLAGS="-O2 -march=armv6 -mfpu=vfp -mfloat-abi=hard"
+               SLKLDFLAGS=""; LIBDIRSUFFIX=""
+               ;;
+    *)         SLKCFLAGS=${SLKCFLAGS:-"O2"}
+               SLKLDFLAGS=${SLKLDFLAGS:-""}; LIBDIRSUFFIX=${LIBDIRSUFFIX:-""}
+               ;;
+  esac
+fi
+
+case "$ARCH" in
+    arm*)    TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)       TARGET=$ARCH-slackware-linux ;;
+esac
+
+# Exit the script on errors:
+set -e
+trap 'echo "$0 FAILED at line ${LINENO}" | tee $OUTPUT/error-${PRGNAM}.log' ERR
+# Catch unitialized variables:
+set -u
+P1=${1:-1}
+
+# Save old umask and set to 0022:
+_UMASK_=$(umask)
+umask 0022
+
+# Create working directories:
+mkdir -p $OUTPUT          # place for the package to be saved
+mkdir -p $TMP/tmp-$PRGNAM # location to build the source
+mkdir -p $PKG             # place for the package to be built
+rm -rf $PKG/*             # always erase old package's contents
+rm -rf $TMP/tmp-$PRGNAM/* # remove the remnants of previous build
+rm -rf $OUTPUT/{checkout,configure,make,install,error,makepkg,patch}-$PRGNAM.log
+                          # remove old log files
+
+# Source file availability:
+if ! [ -f ${SOURCE} ]; then
+  echo "Source '$(basename ${SOURCE})' not available yet..."
+  # Check if the $SRCDIR is writable at all - if not, download to $OUTPUT
+  [ -w "$SRCDIR" ] || SOURCE="$OUTPUT/$(basename $SOURCE)"
+  if [ -f ${SOURCE} ]; then echo "Ah, found it!"; continue; fi
+  if ! [ "x${SRCURL}" == "x" ]; then
+    echo "Will download file to $(dirname $SOURCE)"
+    wget -nv -T 20 -O "${SOURCE}" "${SRCURL}" || true
+    if [ $? -ne 0 -o ! -s "${SOURCE}" ]; then
+      echo "Downloading '$(basename ${SOURCE})' failed... aborting the build."
+      mv -f "${SOURCE}" "${SOURCE}".FAIL
+      exit 1
+    fi
+  else
+    echo "File '$(basename ${SOURCE})' not available... aborting the build."
+    exit 1
+  fi
+fi
+
+if [ "$P1" == "--download" ]; then
+  echo "Download complete."
+  exit 0
+fi
+
+# --- PACKAGE BUILDING ---
+
+echo "++"
+echo "|| $PRGNAM-$VERSION"
+echo "++"
+
+cd $TMP/tmp-$PRGNAM
+echo "Extracting the source archive(s) for $PRGNAM..."
+tar -xvf ${SOURCE}
+cd ${PRGNAM}-${VERSION}
+chown -R root:root .
+chmod -R u+w,go+r-w,a+rX-st .
+
+echo Building ...
+LDFLAGS="$SLKLDFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PRGNAM-$VERSION \
+  --localstatedir=/var \
+  --sysconfdir=/etc \
+  --program-prefix= \
+  --program-suffix= \
+  --build=$TARGET \
+  2>&1 | tee $OUTPUT/configure-${PRGNAM}.log
+
+make $NUMJOBS 2>&1 | tee $OUTPUT/make-${PRGNAM}.log
+make DESTDIR=$PKG install 2>&1 | tee $OUTPUT/install-${PRGNAM}.log
+
+# Add documentation:
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a $DOCS $PKG/usr/doc/$PRGNAM-$VERSION || true
+cat $SRCDIR/$(basename $0) > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+chown -R root:root $PKG/usr/doc/$PRGNAM-$VERSION
+find $PKG/usr/doc -type f -exec chmod 644 {} \;
+
+# Strip binaries (if any):
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+# Add a package description:
+mkdir -p $PKG/install
+cat $SRCDIR/slack-desc > $PKG/install/slack-desc
+
+# Build the package:
+cd $PKG
+makepkg --linkadd y --chown n $OUTPUT/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.${PKGTYPE:-tgz} 2>&1 | tee $OUTPUT/makepkg-${PRGNAM}.log
+cd $OUTPUT
+md5sum ${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.${PKGTYPE:-tgz} > ${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.${PKGTYPE:-tgz}.md5
+cd -
+cat $PKG/install/slack-desc | grep "^${PRGNAM}" > $OUTPUT/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.txt
+
+# Restore the original umask:
+umask ${_UMASK_}
+
diff --git a/jansson/build/slack-desc b/jansson/build/slack-desc
new file mode 100644
index 00000000..b3f01209
--- /dev/null
+++ b/jansson/build/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+       |-----handy-ruler------------------------------------------------------|
+jansson: jansson (C library for encoding, decoding and manipulating JSON data)
+jansson:
+jansson: Jansson is a C library for encoding, decoding and manipulating JSON data.
+jansson: It features:
+jansson: - Simple and intuitive API and data model
+jansson: - Comprehensive documentation
+jansson: - No dependencies on other libraries
+jansson: - Full Unicode support (UTF-8)
+jansson: - Extensive test suite
+jansson:
+jansson: jansson home: http://www.digip.org/jansson/