Initial revision

2 files changed, 234 insertions, 0 deletions

diff --git a/epson-inkjet-printer-escpr/build/epson-inkjet-printer-escpr.SlackBuild b/epson-inkjet-printer-escpr/build/epson-inkjet-printer-escpr.SlackBuild
new file mode 100755
index 00000000..8eafaed4
--- /dev/null
+++ b/epson-inkjet-printer-escpr/build/epson-inkjet-printer-escpr.SlackBuild
@@ -0,0 +1,215 @@
+#!/bin/sh
+# $Id$
+# Copyright 2015  Eric Hameleers, Eindhoven, NL
+# All rights reserved.
+#
+#   Permission to use, copy, modify, and distribute this software for
+#   any purpose with or without fee is hereby granted, provided that
+#   the above copyright notice and this permission notice appear in all
+#   copies.
+#
+#   THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED
+#   WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#   MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+#   IN NO EVENT SHALL THE AUTHORS AND COPYRIGHT HOLDERS AND THEIR
+#   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+#   USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+#   ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+#   OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+#   OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+#   SUCH DAMAGE.
+# -----------------------------------------------------------------------------
+#
+# Slackware SlackBuild script 
+# ===========================
+# By:          Eric Hameleers <alien@slackware.com>
+# For:         epson-inkjet-printer-escpr
+# Descr:       Driver for Epson MF Inkjet Printers.
+# URL:         https://www.epson.com
+# Needs:       
+# Changelog:   
+# 1.4.5-1:     29/jun/2015 by Eric Hameleers <alien@slackware.com>
+#              * Initial build.
+# 
+# Run 'sh epson-inkjet-printer-escpr.SlackBuild' to build a Slackware package.
+# The package (.tgz) and .txt file as well as build logs are created in /tmp .
+# Install it using 'installpkg'. 
+#
+# -----------------------------------------------------------------------------
+
+# Set initial variables:
+
+PRGNAM=epson-inkjet-printer-escpr
+VERSION=${VERSION:-1.4.5}
+BUILD=${BUILD:-1}
+NUMJOBS=${NUMJOBS:" -j4 "}
+TAG=${TAG:-alien}
+
+# This covers most filenames you'd want as documentation. Change if needed.
+DOCS="README COPYING AUTHORS NEWS"
+
+# Keep this configurable:
+CUPS_SERVERROOT=$(cups-config --serverroot)
+CUPS_SERVERDIR=$(cups-config --serverbin)
+CUPS_DATADIR=$(cups-config --datadir)
+
+# Where do we look for sources?
+SRCDIR=$(cd $(dirname $0); pwd)
+
+# Place to build (TMP) package (PKG) and output (OUTPUT) the program:
+TMP=${TMP:-/tmp/build}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+SOURCE="$SRCDIR/${PRGNAM}-${VERSION}-1lsb3.2.src.rpm"
+SRCURL="https://download3.ebz.epson.net/dsc/f/03/00/03/52/19/d912de1ce0155980d9ad3f156f14af99d69d627a/${PRGNAM}-${VERSION}-1lsb3.2.src.rpm"
+
+##
+## --- with a little luck, you won't have to edit below this point --- ##
+##
+
+# Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
+if [ -z "$ARCH" ]; then
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)       export ARCH=$MARCH ;;
+  esac
+fi
+
+case "$ARCH" in
+  i486)      SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+             SLKLDFLAGS=""; LIBDIRSUFFIX=""
+             ;;
+  x86_64)    SLKCFLAGS="-O2 -fPIC"
+             SLKLDFLAGS="-L/usr/lib64"; LIBDIRSUFFIX="64"
+             ;;
+  *)         SLKCFLAGS=${SLKCFLAGS:-"O2"}
+             SLKLDFLAGS=${SLKLDFLAGS:-""}; LIBDIRSUFFIX=${LIBDIRSUFFIX:-""}
+             ;;
+esac
+
+case "ARCH" in
+    arm*)    TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)       TARGET=$ARCH-slackware-linux ;;
+esac
+
+# Exit the script on errors:
+set -e
+trap 'echo "$0 FAILED at line ${LINENO}" | tee $OUTPUT/error-${PRGNAM}.log' ERR
+# Catch unitialized variables:
+set -u
+P1=${1:-1}
+
+# Save old umask and set to 0022:
+_UMASK_=$(umask)
+umask 0022
+
+# Create working directories:
+mkdir -p $OUTPUT          # place for the package to be saved
+mkdir -p $TMP/tmp-$PRGNAM # location to build the source
+mkdir -p $PKG             # place for the package to be built
+rm -rf $PKG/*             # always erase old package's contents
+rm -rf $TMP/tmp-$PRGNAM/* # remove the remnants of previous build
+rm -rf $OUTPUT/{configure,make,install,error,makepkg}-$PRGNAM.log
+                          # remove old log files
+
+# Source file availability:
+if ! [ -f ${SOURCE} ]; then
+  echo "Source '$(basename ${SOURCE})' not available yet..."
+  # Check if the $SRCDIR is writable at all - if not, download to $OUTPUT
+  [ -w "$SRCDIR" ] || SOURCE="$OUTPUT/$(basename $SOURCE)"
+  if [ -f ${SOURCE} ]; then echo "Ah, found it!"; continue; fi
+  if ! [ "x${SRCURL}" == "x" ]; then
+    echo "Will download file to $(dirname $SOURCE)"
+    wget -nv -T 20 -O "${SOURCE}" "${SRCURL}" || true
+    if [ $? -ne 0 -o ! -s "${SOURCE}" ]; then
+      echo "Downloading '$(basename ${SOURCE})' failed... aborting the build."
+      mv -f "${SOURCE}" "${SOURCE}".FAIL
+      exit 1
+    fi
+  else
+    echo "File '$(basename ${SOURCE})' not available... aborting the build."
+    exit 1
+  fi
+fi
+
+if [ "$P1" == "--download" ]; then
+  echo "Download complete."
+  exit 0
+fi
+
+# --- PACKAGE BUILDING ---
+
+echo "++"
+echo "|| $PRGNAM-$VERSION"
+echo "++"
+
+cd $TMP/tmp-$PRGNAM
+
+echo "Extracting the source archive(s) for $PRGNAM..."
+rpm2cpio ${SOURCE} | cpio -dimv -R root:root \
+  2>&1 | tee $OUTPUT/rpmextract-${PRGNAM}.log
+tar xvf $(basename ${SOURCE} .src.rpm).tar.gz
+cd ${PRGNAM}-${VERSION}
+chown -R root:root .
+chmod -R u+w,go+r-w,a+rX-st .
+
+echo Building ...
+LDFLAGS="$SLKLDFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PRGNAM-$VERSION \
+  --localstatedir=/var \
+  --sysconfdir=/etc \
+  --with-cupsfilterdir=${CUPS_SERVERDIR}/cups/filter \
+  --with-cupsppddir=${CUPS_SERVERROOT}/ppd \
+  --program-prefix= \
+  --program-suffix= \
+  --build=$ARCH-slackware-linux \
+  2>&1 | tee $OUTPUT/configure-${PRGNAM}.log
+
+make pkgdatadir=${CUPS_DATADIR} $NUMJOBS \
+  2>&1 | tee $OUTPUT/make-${PRGNAM}.log
+make pkgdatadir=${CUPS_DATADIR} DESTDIR=$PKG install \
+  2>&1 | tee $OUTPUT/install-${PRGNAM}.log
+
+# Add documentation:
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a $DOCS $PKG/usr/doc/$PRGNAM-$VERSION || true
+cat $SRCDIR/$(basename $0) > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+chown -R root:root $PKG/usr/doc/$PRGNAM-$VERSION
+find $PKG/usr/doc -type f -exec chmod 644 {} \;
+
+# Compress the man page(s):
+if [ -d $PKG/usr/man ]; then
+  find $PKG/usr/man -type f -name "*.?" -exec gzip -9f {} \;
+  for i in $(find $PKG/usr/man -type l -name "*.?") ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+fi
+
+# Strip binaries (if any):
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+# Add a package description:
+mkdir -p $PKG/install
+cat $SRCDIR/slack-desc > $PKG/install/slack-desc
+
+# Build the package:
+cd $PKG
+makepkg --linkadd y --chown n $OUTPUT/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.${PKGTYPE:-tgz} 2>&1 | tee $OUTPUT/makepkg-${PRGNAM}.log
+cd $OUTPUT
+md5sum ${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.${PKGTYPE:-tgz} > ${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.${PKGTYPE:-tgz}.md5
+cd -
+cat $PKG/install/slack-desc | grep "^${PRGNAM}" > $OUTPUT/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.txt
+
+# Restore the original umask:
+umask ${_UMASK_}
+
diff --git a/epson-inkjet-printer-escpr/build/slack-desc b/epson-inkjet-printer-escpr/build/slack-desc
new file mode 100644
index 00000000..2fb7a92c
--- /dev/null
+++ b/epson-inkjet-printer-escpr/build/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+                          |-----handy-ruler------------------------------------------------------|
+epson-inkjet-printer-escpr: epson-inkjet-printer-escpr (Driver for Epson MF Inkjet Printers)
+epson-inkjet-printer-escpr:
+epson-inkjet-printer-escpr: This software is a filter program used with CUPS in Linux.
+epson-inkjet-printer-escpr: It enables high quality print with Seiko Epson Color Ink Jet Printers.
+epson-inkjet-printer-escpr: This package can be used for all EPSON ESC/P-R printers.
+epson-inkjet-printer-escpr: For a detailed list of supported printers, see:
+epson-inkjet-printer-escpr: http://download.ebz.epson.net/dsc/search/01/search/?OSC=LX
+epson-inkjet-printer-escpr:
+epson-inkjet-printer-escpr:
+epson-inkjet-printer-escpr: epson-inkjet-printer-escpr home: https://www.epson.com
+epson-inkjet-printer-escpr: