diff options
-rwxr-xr-x | tinyproxy/build/tinyproxy.SlackBuild | 286 |
1 files changed, 125 insertions, 161 deletions
diff --git a/tinyproxy/build/tinyproxy.SlackBuild b/tinyproxy/build/tinyproxy.SlackBuild index 4aff327d..e656c8ff 100755 --- a/tinyproxy/build/tinyproxy.SlackBuild +++ b/tinyproxy/build/tinyproxy.SlackBuild @@ -1,59 +1,92 @@ #!/bin/sh -# Copyright (c) 2006 Eric Hameleers <alien@slackware.com> -# Distributed under the terms of the GNU General Public License, Version 2 +# $Id$ +# Copyright (c) 2008 Eric Hameleers <alien@slackware.com> +# All rights reserved. +# +# Permission to use, copy, modify, and distribute this software for +# any purpose with or without fee is hereby granted, provided that +# the above copyright notice and this permission notice appear in all +# copies. +# +# THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +# IN NO EVENT SHALL THE AUTHORS AND COPYRIGHT HOLDERS AND THEIR +# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF +# USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND +# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +# OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT +# OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF +# SUCH DAMAGE. # ----------------------------------------------------------------------------- # # Slackware SlackBuild script # =========================== -# By: Eric Hameleers <alien@slackware.com> -# For: tinyproxy -# Descr: lightweight HTTP proxy (transparent proxy support) -# URL: http://tinyproxy.sourceforge.net/ -# Needs: -# Changelog: -# 1.7.0-1: 27/mei/2006 by Eric Hameleers <alien@slackware.com> -# * Initial build. +# By: Eric Hameleers <alien@slackware.com> +# For: tinyproxy +# Descr: lightweight HTTP proxy +# URL: http://tinyproxy.sourceforge.net/ +# Needs: +# Changelog: +# 1.7.0-1: 27/mei/2006 by Eric Hameleers <alien@slackware.com> +# * Initial build. Enable transparent proxy support. +# 1.6.3-1: 18/May/2008 by Eric Hameleers <alien@slackware.com> +# * Reverted to the 1.6.3 'stable' release - that was released +# many months later than 1.7.0. Btw, further development of +# tinyproxy has started again it seems. # -# Run 'sh SlackBuild --cleanup' to build a Slackware package. +# Run 'sh tinyproxy.SlackBuild --cleanup' to build a Slackware package. # The package (.tgz) plus descriptive .txt file are created in /tmp . # Install using 'installpkg'. # # ----------------------------------------------------------------------------- -# --- INIT --- # Set initial variables: -CWD=`pwd` -if [ "$TMP" = "" ]; then - TMP=/tmp -fi PRGNAM=tinyproxy -VERSION=${VERSION:-1.7.0} +VERSION=${VERSION:-1.6.3} +MAJVER=$(echo $VERSION | cut -d. -f1-2) ARCH=${ARCH:-i486} -BUILD=1 +BUILD=${BUILD:-1} +TAG=${TAG:-alien} DOCS="AUTHORS COPYING ChangeLog INSTALL NEWS README TODO \ doc/HTML_VARIABLES doc/HTTP_ERROR_CODES doc/RFC_INFO \ doc/filter-howto.txt doc/releases.txt doc/report.sh" -# If you have more source files, list them here as SOURCE[1], SOURCE[2], etc. -# If you know the URL for a source file, you can put that into the SRCURL[] -# variable, and the SlackBuild script will try to download it for you. -# If you set SRCUSE[] to "no" the script will never try to download or use it. +# Where do we look for sources? +SRCDIR=$(cd $(dirname $0); pwd) -SOURCE[0]="${PRGNAM}-${VERSION}.tar.gz" -SRCURL[0]="http://surfnet.dl.sourceforge.net/sourceforge/${PRGNAM}/${PRGNAM}-${VERSION}.tar.gz" -SRCUSE[0]="" +# Place to build (TMP) package (PKG) and output (OUTPUT) the program: +TMP=${TMP:-/tmp/build} +PKG=$TMP/package-$PRGNAM +OUTPUT=${OUTPUT:-/tmp} + +SOURCE="$SRCDIR/${PRGNAM}-${VERSION}.tar.gz" +SRCURL="http://files.banu.com/pub/${PRGNAM}/${MAJVER}/${PRGNAM}-${VERSION}.tar.gz" ## ## --- with a little luck, you won't have to edit below this point --- ## ## +# Exit the script on errors: +set -e +trap 'echo "$0 FAILED at line ${LINENO}" | tee $OUTPUT/error-${PRGNAM}.log' ERR +# Catch unitialized variables: +set -u +P1=${1:-1} + +# Slackware 11 and up need other option (gcc > 3.3.x) +if [ $(gcc -dumpversion | tr -d '.' |cut -c 1-2) -gt 33 ]; then + MOPT=tune +else + MOPT=cpu +fi + case "$ARCH" in - i386) SLKCFLAGS="-O2 -march=i386 -mcpu=i686" - SLKLDFLAGS=""; LIBDIRSUFFIX="" - ;; - i486) SLKCFLAGS="-O2 -march=i486 -mcpu=i686" + i486) SLKCFLAGS="-O2 -march=i486 -m${MOPT}=i686" SLKLDFLAGS=""; LIBDIRSUFFIX="" ;; s390) SLKCFLAGS="-O2" @@ -70,38 +103,33 @@ case "$ARCH" in ;; esac -PKG=$TMP/package-$PRGNAM - -if [ ! -d $TMP/tmp-$PRGNAM ]; then - mkdir -p $TMP/tmp-$PRGNAM # location to build the source -elif [ "$1" != "--oldbuild" ]; then - # If the "--oldbuild" parameter is present, we keep - # the old build files and continue; - # By default we remove the remnants of previous build and continue: - rm -rf $TMP/tmp-$PRGNAM/* -fi - - -# --- SOURCE FILE AVAILABILITY --- - -for (( i = 0; i < ${#SOURCE[*]}; i++ )) ; do - if ! [ -f ${CWD}/${SOURCE[$i]} -o "${SRCUSE[$i]}" == "no" ]; then - if ! [ "x${SRCURL[$i]}" == "x" ]; then - echo "Source '${SOURCE[$i]}' not available yet... will download now:" - wget -nv -O "${CWD}/${SOURCE[$i]}" "${SRCURL[$i]}" - if [ $? -ne 0 ]; then - echo "Downloading '${SOURCE[$i]}' failed... aborting the build." - mv -f "${CWD}/${SOURCE[$i]}" "${CWD}/${SOURCE[$i]}".FAIL - exit 1 - fi - else - echo "File '${SOURCE[$i]}' not available... aborting the build." +# Create working directories: +mkdir -p $OUTPUT # place for the package to be saved +mkdir -p $TMP/tmp-$PRGNAM # location to build the source +mkdir -p $PKG # place for the package to be built +rm -rf $PKG/* # always erase old package's contents +rm -rf $TMP/tmp-$PRGNAM/* # remove the remnants of previous build + +# Source file availability: +if ! [ -f ${SOURCE} ]; then + if ! [ "x${SRCURL}" == "x" ]; then + # Check if the $SRCDIR is writable at all - if not, download to $OUTPUT + [ -w "$SRCDIR" ] || SOURCE="$OUTPUT/$(basename $SOURCE)" + echo "Source '$(basename ${SOURCE})' not available yet..." + echo "Will download file to $(dirname $SOURCE)" + wget -nv -T 20 -O "${SOURCE}" "${SRCURL}" || true + if [ $? -ne 0 -o ! -s "${SOURCE}" ]; then + echo "Downloading '$(basename ${SOURCE})' failed... aborting the build." + mv -f "${SOURCE}" "${SOURCE}".FAIL exit 1 fi + else + echo "File '$(basename ${SOURCE})' not available... aborting the build." + exit 1 fi -done +fi -if [ "$1" == "--download" ]; then +if [ "$P1" == "--download" ]; then echo "Download complete." exit 0 fi @@ -112,61 +140,20 @@ echo "++" echo "|| $PRGNAM-$VERSION" echo "++" -# Safety net 8-) -if [ "$PKG" = "" -o "$PKG" = "/" ] ; then - cat <<-EOT - Your script sucks!!! - You were about to delete the contents of your computer's hard disk! - Please provide a value for the variable 'PKG'. - EOT - exit 1 -elif [ ! -d $PKG ]; then - mkdir -p $PKG # place for the package to be built -else - rm -rf $PKG/* # We always erase old package's contents: -fi - -cd $PKG - -# Explode the package framework: -if [ -f $CWD/_$PRGNAM.tar.gz ]; then - explodepkg $CWD/_$PRGNAM.tar.gz -fi - cd $TMP/tmp-$PRGNAM - - -# --- TARBALL EXTRACTION,PATCH,MODIFY --- - echo "Extracting the source archive(s) for $PRGNAM..." -for (( i = 0; i < ${#SOURCE[*]}; i++ )) ; do - if [ "${SRCUSE[$i]}" == "no" ]; then - continue - elif `file $CWD/${SOURCE[$i]} | grep -q ": bzip2"`; then - tar -xjvf $CWD/${SOURCE[$i]} - elif `file $CWD/${SOURCE[$i]} | grep -qi ": zip"`; then - unzip $CWD/${SOURCE[$i]} - elif `file $CWD/${SOURCE[$i]} | grep -qi ": 7-zip"`; then - 7za -x $CWD/${SOURCE[$i]} - else - tar -xzvf $CWD/${SOURCE[$i]} - fi - if [ $? -ne 0 ]; then - echo "Error in unpacking '${SOURCE[$i]}!' Aborting..." - exit $? - fi -done +if $(file ${SOURCE} | grep -q ": bzip2"); then + tar -xjvf ${SOURCE} +elif $(file ${SOURCE} | grep -q ": gzip"); then + tar -xzvf ${SOURCE} +fi cd ${PRGNAM}-${VERSION} - -chown -R root.root * -find . -perm 777 -exec chmod 755 {} \; - - -# --- BUILDING --- +chown -R root:root . +chmod -R u+w,go+r-w,a-s . echo Building ... - LDFLAGS="$SLKLDFLAGS" \ +CXXFLAGS="$SLKCFLAGS" \ CFLAGS="$SLKCFLAGS" \ ./configure --prefix=/usr \ --libdir=/usr/lib${LIBDIRSUFFIX} \ @@ -179,24 +166,22 @@ CFLAGS="$SLKCFLAGS" \ --enable-transparent-proxy \ --program-prefix="" \ --program-suffix="" \ - $ARCH-slackware-linux \ - 2>&1 | tee $CWD/configure-${PRGNAM}.log -make 2>&1 | tee $CWD/make-${PRGNAM}.log + --build=$ARCH-slackware-linux \ + 2>&1 | tee $OUTPUT/configure-${PRGNAM}.log +make 2>&1 | tee $OUTPUT/make-${PRGNAM}.log -# # Install all the needed stuff to the package dir -# -# Use installwatch if available: -which installwatch > /dev/null 2>&1 -if [ $? == 0 ]; then - installwatch -o $CWD/install-${PRGNAM}.log make DESTDIR=$PKG install +# Use installwatch if available, to produce a logfile of the installation +# process that is more easily readable: +if $(which installwatch > /dev/null 2>&1); then + installwatch -o $OUTPUT/install-${PRGNAM}.log make DESTDIR=$PKG install else - make DESTDIR=$PKG install 2>&1 |tee $CWD/install-${PRGNAM}.log + make DESTDIR=$PKG install 2>&1 |tee $OUTPUT/install-${PRGNAM}.log fi mv $PKG/etc/tinyproxy/tinyproxy.conf $PKG/etc/tinyproxy/tinyproxy.conf.new -# Add this to the doinst.sh +# Add this to the doinst.sh: ! [ -d $PKG/install ] && mkdir -p $PKG/install cat <<EOINS >> $PKG/install/doinst.sh # Handle the incoming configuration files: @@ -219,62 +204,41 @@ config etc/tinyproxy/tinyproxy.conf.new EOINS - -# --- DOCUMENTATION --- - +# Add documentation: mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION -cp -a $DOCS \ - $PKG/usr/doc/$PRGNAM-$VERSION -chmod -R a-w $PKG/usr/doc/$PRGNAM-$VERSION/* +cp -a $DOCS $PKG/usr/doc/$PRGNAM-$VERSION || true +cp -a $SRCDIR/$(basename $0) $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild +find $PKG/usr/doc -type f -exec chmod 644 {} \; -# Move incorrectly installed man pages, if any -[ -d $PKG/usr/share/man ] && \ - mv $PKG/usr/share/man $PKG/usr/ && rmdir $PKG/usr/share -# Compress the man page(s) -[ -d $PKG/usr/man ] && \ +# Compress the man page(s): +if [ -d $PKG/usr/man ]; then find $PKG/usr/man -type f -name "*.?" -exec gzip -9f {} \; + for i in $(find $PKG/usr/man -type l -name "*.?") ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done +fi -# Strip binaries -( cd $PKG - find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -) - - -# --- OWNERSHIP, RIGHTS --- - -chmod -R o-w $PKG - - -# --- PACKAGE DESCRIPTION --- +# Strip binaries: +cd $PKG +find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true +find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true +cd - +# Add a package description: mkdir -p $PKG/install -cat $CWD/slack-desc > $PKG/install/slack-desc -if [ -f $CWD/doinst.sh ]; then - cat $CWD/doinst.sh > $PKG/install/doinst.sh +cat $SRCDIR/slack-desc > $PKG/install/slack-desc +if [ -f $SRCDIR/doinst.sh ]; then + cat $SRCDIR/doinst.sh >> $PKG/install/doinst.sh fi -if [ -f $CWD/slack-required ]; then - cat $CWD/slack-required > $PKG/install/slack-required -fi - - -# --- BUILDING --- # Build the package: cd $PKG -makepkg --linkadd y --chown n $TMP/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}.tgz \ - 2>&1 | tee $CWD/makepkg-${PRGNAM}.log -(cd $TMP && md5sum ${PRGNAM}-${VERSION}-${ARCH}-${BUILD}.tgz > ${PRGNAM}-${VERSION}-${ARCH}-${BUILD}.tgz.md5) -cat $PKG/install/slack-desc | grep "^${PRGNAM}" > $TMP/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}.txt -if [ -f $PKG/install/slack-required ]; then - cat $PKG/install/slack-required > $TMP/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}.dep -fi - - -# --- CLEANUP --- +makepkg --linkadd y --chown n $OUTPUT/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.tgz 2>&1 | tee $OUTPUT/makepkg-${PRGNAM}.log +cd $OUTPUT +md5sum ${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.tgz > ${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.tgz.md5 +cd - +cat $PKG/install/slack-desc | grep "^${PRGNAM}" > $OUTPUT/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.txt # Clean up the extra stuff: -if [ "$1" = "--cleanup" ]; then +if [ "$P1" = "--cleanup" ]; then rm -rf $TMP/tmp-$PRGNAM rm -rf $PKG fi |