Initial commit of a Slackware cross-arch bootstrap framework.

31 files changed, 874 insertions, 0 deletions

diff --git a/source.local/a/udev/config/modprobe.d/8139cp.conf b/source.local/a/udev/config/modprobe.d/8139cp.conf
new file mode 100644
index 0000000..65f0af0
--- /dev/null
+++ b/source.local/a/udev/config/modprobe.d/8139cp.conf
@@ -0,0 +1,7 @@
+##############################################################################
+# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that
+##############################################################################
+
+# Alternate 8139 driver.  Some 8139 cards need this specific driver, though...
+blacklist 8139cp
+
diff --git a/source.local/a/udev/config/modprobe.d/README b/source.local/a/udev/config/modprobe.d/README
new file mode 100644
index 0000000..43355e8
--- /dev/null
+++ b/source.local/a/udev/config/modprobe.d/README
@@ -0,0 +1,11 @@
+# /etc/modprobe.d/README
+#
+# The monolithic "blacklist" file (and others) that used to be here in this
+# directory have been split into several more fine-grained files and moved
+# to the /lib/modprobe.d/ directory.  Any file in /lib/modprobe.d/ will be
+# overridden by an identically named file in this directory (/etc/modprobe.d/)
+# or /run/modprobe.d/ (but since /run is on a tmpfs, it's not persistent
+# across reboots, so you probably don't want to use it).
+#
+# See "man modprobe.d" for more information.
+#
diff --git a/source.local/a/udev/config/modprobe.d/bcm43xx.conf b/source.local/a/udev/config/modprobe.d/bcm43xx.conf
new file mode 100644
index 0000000..55b3c2a
--- /dev/null
+++ b/source.local/a/udev/config/modprobe.d/bcm43xx.conf
@@ -0,0 +1,7 @@
+##############################################################################
+# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that
+##############################################################################
+
+# Deprecated BCM4318 driver.
+blacklist bcm43xx
+
diff --git a/source.local/a/udev/config/modprobe.d/eepro100.conf b/source.local/a/udev/config/modprobe.d/eepro100.conf
new file mode 100644
index 0000000..a7ca4aa
--- /dev/null
+++ b/source.local/a/udev/config/modprobe.d/eepro100.conf
@@ -0,0 +1,8 @@
+##############################################################################
+# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that
+##############################################################################
+
+# Alternate Intel EtherExpress Pro/100 support driver.  List it
+# here so it won't conflict with an already-loaded e100 module.
+blacklist eepro100
+
diff --git a/source.local/a/udev/config/modprobe.d/eth1394.conf b/source.local/a/udev/config/modprobe.d/eth1394.conf
new file mode 100644
index 0000000..a2f475a
--- /dev/null
+++ b/source.local/a/udev/config/modprobe.d/eth1394.conf
@@ -0,0 +1,8 @@
+##############################################################################
+# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that
+##############################################################################
+
+# Ethernet over IEEE1394 module.  In too many cases this will load
+# when there's no eth1394 device present (just an IEEE1394 port)
+blacklist eth1394
+
diff --git a/source.local/a/udev/config/modprobe.d/evbug.conf b/source.local/a/udev/config/modprobe.d/evbug.conf
new file mode 100644
index 0000000..0af0a83
--- /dev/null
+++ b/source.local/a/udev/config/modprobe.d/evbug.conf
@@ -0,0 +1,7 @@
+##############################################################################
+# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that
+##############################################################################
+
+#evbug is a debug tool and should be loaded explicitly
+blacklist evbug
+
diff --git a/source.local/a/udev/config/modprobe.d/framebuffers.conf b/source.local/a/udev/config/modprobe.d/framebuffers.conf
new file mode 100644
index 0000000..770ce42
--- /dev/null
+++ b/source.local/a/udev/config/modprobe.d/framebuffers.conf
@@ -0,0 +1,48 @@
+##############################################################################
+# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that
+##############################################################################
+
+# Hardware specific video framebuffer modules.  If the user wants
+# these, they can load them manually or de-blacklist them.  Having
+# them load automatically may lead to funny side effects with
+# certain revisions of video hardware.
+blacklist arcfb
+blacklist aty128fb
+blacklist atyfb
+blacklist cirrusfb
+blacklist clgenfb
+blacklist cyber2000fb
+blacklist fbcon-cfb2
+blacklist fbcon-cfb4
+blacklist fbcon-hga
+blacklist fbcon-mfb
+blacklist fbcon-vga-planes
+blacklist fbgen
+blacklist hgafb
+blacklist i2c-matroxfb
+blacklist i810fb
+blacklist intelfb
+blacklist kyrofb
+blacklist matroxfb_DAC1064
+blacklist matroxfb_Ti3026
+blacklist matroxfb_accel
+blacklist matroxfb_base
+blacklist matroxfb_crtc2
+blacklist matroxfb_g450
+blacklist matroxfb_maven
+blacklist matroxfb_misc
+blacklist neofb
+blacklist nvidiafb
+blacklist pm2fb
+blacklist pm3fb
+blacklist radeonfb
+blacklist rivafb
+blacklist savagefb
+blacklist sisfb
+blacklist sstfb
+blacklist tdfxfb
+blacklist tridentfb
+blacklist vga16fb
+blacklist viafb
+blacklist virgefb
+
diff --git a/source.local/a/udev/config/modprobe.d/hostap.conf b/source.local/a/udev/config/modprobe.d/hostap.conf
new file mode 100644
index 0000000..4254d3d
--- /dev/null
+++ b/source.local/a/udev/config/modprobe.d/hostap.conf
@@ -0,0 +1,12 @@
+##############################################################################
+# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that
+##############################################################################
+
+# Modules used to run a wireless adapter as an access point.  These
+# conflict with the normal driver for the device, and so should be
+# loaded manually.
+blacklist hostap_cs
+blacklist hostap_pci
+blacklist hostap_plx
+blacklist hostap
+
diff --git a/source.local/a/udev/config/modprobe.d/hw_random.conf b/source.local/a/udev/config/modprobe.d/hw_random.conf
new file mode 100644
index 0000000..b912e01
--- /dev/null
+++ b/source.local/a/udev/config/modprobe.d/hw_random.conf
@@ -0,0 +1,7 @@
+##############################################################################
+# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that
+##############################################################################
+
+# This module has also been known to cause crashes with some hardware.
+blacklist hw_random
+
diff --git a/source.local/a/udev/config/modprobe.d/isapnp.conf b/source.local/a/udev/config/modprobe.d/isapnp.conf
new file mode 100644
index 0000000..a89ad6b
--- /dev/null
+++ b/source.local/a/udev/config/modprobe.d/isapnp.conf
@@ -0,0 +1,24 @@
+##############################################################################
+# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that
+##############################################################################
+
+# These aliases are here because many PnP modules do not provide them.
+#
+# NOTE:  Commented out due to noise pollution from udev.
+# In the unlikely event that your machine needs these aliases, copy this
+# file to /etc/modprobe.d/isapnp.conf and uncomment them there.
+
+#alias pnp:dPNP0400 parport_pc
+#alias pnp:dPNP0401 parport_pc
+#alias pnp:dPNP0510 irtty-sir
+#alias pnp:dPNP0511 irtty-sir
+#alias pnp:dPNP0700 floppy
+#alias pnp:dPNP0B00 rtc
+#alias acpi:PNP0B00: rtc-cmos
+#alias acpi:PNP0B01: rtc-cmos
+#alias acpi:PNP0B02: rtc-cmos
+#alias pnp:dPNPB02F analog
+#alias pnp:dPNP0F13 psmouse
+#alias pnp:dPNP0800 pcspkr
+#alias pnp:dPNP0303 atkbd
+
diff --git a/source.local/a/udev/config/modprobe.d/isdn.conf b/source.local/a/udev/config/modprobe.d/isdn.conf
new file mode 100644
index 0000000..7f73675
--- /dev/null
+++ b/source.local/a/udev/config/modprobe.d/isdn.conf
@@ -0,0 +1,11 @@
+##############################################################################
+# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that
+##############################################################################
+
+# These two come from the hwdata project
+# Bug numbers are Fedora/RH specific
+
+# ISDN - see bugs 154799, 159068
+blacklist hisax
+blacklist hisax_fcpcipnp
+
diff --git a/source.local/a/udev/config/modprobe.d/oss.conf b/source.local/a/udev/config/modprobe.d/oss.conf
new file mode 100644
index 0000000..52ed2f5
--- /dev/null
+++ b/source.local/a/udev/config/modprobe.d/oss.conf
@@ -0,0 +1,61 @@
+##############################################################################
+# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that
+##############################################################################
+
+# OSS (Open Sound System) modules.  This is the old and deprecated Linux
+# sound system.  If you want to use OSS, remove the alsa-driver package
+# and cut out (or comment out) this list.  With these modules
+# blacklisted ALSA will load by default.
+blacklist ac97
+blacklist ac97_codec
+blacklist aci
+blacklist ad1816
+blacklist ad1848
+blacklist ad1889
+blacklist adlib_card
+blacklist aedsp16
+blacklist ali5455
+blacklist awe_wave
+blacklist btaudio
+blacklist cmpci
+blacklist cs4232
+blacklist cs4281
+blacklist cs46xx
+blacklist emu10k1
+blacklist es1370
+blacklist es1371
+blacklist esssolo1
+blacklist forte
+blacklist gus
+blacklist i810_audio
+blacklist kahlua
+blacklist mad16
+blacklist maestro
+blacklist maestro3
+blacklist maui
+blacklist mpu401
+blacklist msnd
+blacklist msnd_classic
+blacklist msnd_pinnacle
+blacklist nm256_audio
+blacklist opl3
+blacklist opl3sa
+blacklist opl3sa2
+blacklist pas2
+blacklist pss
+blacklist rme96xx
+blacklist sb
+blacklist sb_lib
+blacklist sgalaxy
+blacklist sonicvibes
+blacklist sound
+blacklist sscape
+blacklist trident
+blacklist trix
+blacklist uart401
+blacklist uart6850
+blacklist v_midi
+blacklist via82cxxx_audio
+blacklist wavefront
+blacklist ymfpci
+
diff --git a/source.local/a/udev/config/modprobe.d/pcspkr.conf b/source.local/a/udev/config/modprobe.d/pcspkr.conf
new file mode 100644
index 0000000..66de6b7
--- /dev/null
+++ b/source.local/a/udev/config/modprobe.d/pcspkr.conf
@@ -0,0 +1,9 @@
+##############################################################################
+# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that
+##############################################################################
+
+# PC Speaker support:
+# This one is loaded by /etc/rc.d/rc.modules. If you don't like
+# the beeps and buzz from speaker, edit /etc/rc.d/rc.modules.
+blacklist pcspkr
+
diff --git a/source.local/a/udev/config/modprobe.d/psmouse.conf b/source.local/a/udev/config/modprobe.d/psmouse.conf
new file mode 100644
index 0000000..cc41414
--- /dev/null
+++ b/source.local/a/udev/config/modprobe.d/psmouse.conf
@@ -0,0 +1,10 @@
+##############################################################################
+# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that
+##############################################################################
+
+# PS/2 mouse support:
+# The default options when the psmouse module can cause problems with KVM
+# switches.  If you experience this, you may want to uncomment the line
+# below to use a more basic mouse protocol with the psmouse module:
+#options psmouse proto=imps
+
diff --git a/source.local/a/udev/config/modprobe.d/scsi-sata-controllers.conf b/source.local/a/udev/config/modprobe.d/scsi-sata-controllers.conf
new file mode 100644
index 0000000..6147041
--- /dev/null
+++ b/source.local/a/udev/config/modprobe.d/scsi-sata-controllers.conf
@@ -0,0 +1,81 @@
+##############################################################################
+# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that
+##############################################################################
+
+# SCSI and SATA controller modules.  Typically these are either
+# built into the kernel or loaded with an initrd already.
+blacklist 3w-xxxx
+blacklist 53c7,8xx
+blacklist AM53C974
+blacklist BusLogic
+blacklist NCR53c406a
+blacklist a100u2w
+blacklist advansys
+blacklist aha152x
+blacklist aha1542
+blacklist aha1740
+blacklist aic79xx
+blacklist aic7xxx
+blacklist aic7xxx_old
+blacklist aic94xx
+blacklist ata_piix
+blacklist atp870u
+blacklist cpqfc
+blacklist dc395x
+blacklist dmx3191d
+blacklist dpt_i2o
+blacklist dtc
+blacklist eata
+blacklist eata_dma
+blacklist eata_pio
+blacklist fdomain
+blacklist g_NCR5380
+blacklist g_NCR5380_mmio
+blacklist gdth
+blacklist ide-scsi
+blacklist imm
+blacklist in2000
+blacklist initio
+blacklist ipr
+blacklist ips
+blacklist libata
+blacklist megaraid
+blacklist ncr53c8xx
+blacklist nsp32
+blacklist osst
+blacklist pas16
+blacklist pci2000
+blacklist pci2220i
+blacklist ppa
+blacklist psi240i
+blacklist qla1280
+blacklist qla2100
+blacklist qla2200
+blacklist qla2300
+blacklist qla2322
+blacklist qla2xxx
+blacklist qla6312
+blacklist qla6322
+blacklist qlogicfas
+blacklist qlogicfas408
+blacklist qlogicfc
+blacklist qlogicisp
+blacklist seagate
+blacklist sim710
+blacklist sata_promise
+blacklist sata_sil
+blacklist sata_sis
+blacklist sata_svw
+blacklist sata_sx4
+blacklist sata_via
+blacklist sata_vsc
+blacklist scsi_debug
+blacklist scsi_transport_fc
+blacklist scsi_transport_spi
+blacklist sym53c416
+blacklist sym53c8xx
+blacklist sym53c8xx
+blacklist t128
+blacklist tmscsim
+blacklist u14-34f
+
diff --git a/source.local/a/udev/config/modprobe.d/sound-modems.conf b/source.local/a/udev/config/modprobe.d/sound-modems.conf
new file mode 100644
index 0000000..f458346
--- /dev/null
+++ b/source.local/a/udev/config/modprobe.d/sound-modems.conf
@@ -0,0 +1,10 @@
+##############################################################################
+# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that
+##############################################################################
+
+# ALSA modules to support sound modems.  These should be loaded manually
+# if needed.  For most people they just break sound support...
+blacklist snd-atiixp-modem
+blacklist snd-intel8x0m
+blacklist snd-via82xx-modem
+
diff --git a/source.local/a/udev/config/modprobe.d/tulip.conf b/source.local/a/udev/config/modprobe.d/tulip.conf
new file mode 100644
index 0000000..64b6a5c
--- /dev/null
+++ b/source.local/a/udev/config/modprobe.d/tulip.conf
@@ -0,0 +1,11 @@
+##############################################################################
+# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that
+##############################################################################
+
+# tulip ... de4x5, xircom_tulip_cb, dmfe (...) handle same devices
+blacklist de4x5
+
+# At least 2.4.3 and later xircom_tulip doesn't have that conflict
+# xircom_tulip_cb
+blacklist dmfe
+
diff --git a/source.local/a/udev/config/modprobe.d/usb-controller.conf b/source.local/a/udev/config/modprobe.d/usb-controller.conf
new file mode 100644
index 0000000..f5e4e50
--- /dev/null
+++ b/source.local/a/udev/config/modprobe.d/usb-controller.conf
@@ -0,0 +1,9 @@
+##############################################################################
+# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that
+##############################################################################
+
+# The EHCI driver should be loaded before the ones for low speed controllers
+# or some devices may be confused when they are disconnected and reconnected.
+softdep uhci-hcd pre: ehci-hcd
+softdep ohci-hcd pre: ehci-hcd
+
diff --git a/source.local/a/udev/config/modprobe.d/via-ircc.conf b/source.local/a/udev/config/modprobe.d/via-ircc.conf
new file mode 100644
index 0000000..3dfa573
--- /dev/null
+++ b/source.local/a/udev/config/modprobe.d/via-ircc.conf
@@ -0,0 +1,7 @@
+##############################################################################
+# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that
+##############################################################################
+
+# The kernel lists this as "experimental", but for now it's "broken"
+blacklist via-ircc
+
diff --git a/source.local/a/udev/config/modprobe.d/watchdog.conf b/source.local/a/udev/config/modprobe.d/watchdog.conf
new file mode 100644
index 0000000..66d1f83
--- /dev/null
+++ b/source.local/a/udev/config/modprobe.d/watchdog.conf
@@ -0,0 +1,43 @@
+##############################################################################
+# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that
+##############################################################################
+
+# Blacklist all watchdog modules. Many motherboards hang with them, and
+# if you really need a watchdog, you probably know how to load the module 
+blacklist acquirewdt
+blacklist advantechwdt
+blacklist alim1535_wdt
+blacklist alim7101_wdt
+blacklist cpu5wdt
+blacklist eurotechwdt
+blacklist hpwdt
+blacklist i6300esb
+blacklist i8xx_tco
+blacklist iTCO_vendor_support
+blacklist iTCO_wdt
+blacklist ib700wdt
+blacklist ibmasr
+blacklist it8712f_wdt
+blacklist machzwd
+blacklist mixcomwd
+blacklist pc87413_wdt
+blacklist pcwd
+blacklist pcwd_pci
+blacklist pcwd_usb
+blacklist sbc60xxwdt
+blacklist sbc7240_wdt
+blacklist sbc8360
+blacklist sbc_epx_c3
+blacklist sc1200wdt
+blacklist sc520_wdt
+blacklist scx200_wdt
+blacklist smsc37b787_wdt
+blacklist softdog
+blacklist w83627hf_wdt
+blacklist w83697hf_wdt
+blacklist w83877f_wdt
+blacklist w83977f_wdt
+blacklist wafer5823wdt
+blacklist wdt
+blacklist wdt_pci
+
diff --git a/source.local/a/udev/config/rc.d/rc.udev.new b/source.local/a/udev/config/rc.d/rc.udev.new
new file mode 100644
index 0000000..2bbd981
--- /dev/null
+++ b/source.local/a/udev/config/rc.d/rc.udev.new
@@ -0,0 +1,167 @@
+#!/bin/sh
+# This is a script to initialize udev, which populates the /dev
+# directory with device nodes, scans for devices, loads the
+# appropriate kernel modules, and configures the devices.
+
+PATH="/sbin:/bin"
+
+. /etc/udev/udev.conf
+
+# remove trailing slash from udev_root
+UDEV_ROOT=$(echo "${udev_root}" |sed 's/\/*$//')
+
+check_mounted() {
+  grep -E -q "^[^[:space:]]+ $1 $2" /proc/mounts
+  return $?	
+}
+
+mount_devpts() {
+  if ! check_mounted $UDEV_ROOT/pts devpts ; then
+    mkdir $UDEV_ROOT/pts 2> /dev/null
+    mount -n -o mode=0620,gid=5 -t devpts devpts $UDEV_ROOT/pts
+  fi
+}
+
+case "$1" in
+    start)
+        # Sanity check #1, udev requires that the kernel support devtmpfs:
+        if ! grep -wq devtmpfs /proc/filesystems ; then
+          echo "Sorry, but you need devtmpfs support in the kernel to use udev."
+          echo "Both of these options are needed:  CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y"
+          echo
+          echo "FATAL:  Refusing to run /etc/rc.d/rc.udev."
+          sleep 10
+          exit 1
+        fi
+
+	# Sanity check #2, udev requires that the kernel support tmpfs:
+        if ! grep -wq tmpfs /proc/filesystems ; then
+          echo "Sorry, but you need tmpfs support in the kernel to use udev."
+          echo
+          echo "FATAL:  Refusing to run /etc/rc.d/rc.udev."
+          sleep 10
+          exit 1
+        fi
+
+        # Sanity check #3, make sure that a 2.6.x kernel is new enough:
+        if [ "$(uname -r | cut -f 1,2 -d .)" = "2.6" ]; then
+          if [ "$(uname -r | cut -f 3 -d . | sed 's/[^[:digit:]].*//')" -lt "32" ]; then
+            echo "Sorry, but you need a 2.6.32+ kernel to use this udev."
+            echo "Your kernel version is only $(uname -r)."
+            echo
+            echo "FATAL:  Refusing to run /etc/rc.d/rc.udev."
+            sleep 10
+            exit 1
+          fi
+        fi
+
+        # Sanity check #4, make sure the udev package was not removed.  If udevd
+        # is not there, this will also shut off this script to prevent further
+        # problems:
+        if [ ! -x /sbin/udevd ]; then
+          chmod 0644 /etc/rc.d/rc.udev
+          echo "No udevd daemon found."
+          echo "Turning off udev:  chmod 644 /etc/rc.d/rc.udev"
+          echo "FATAL:  Refusing to run /etc/rc.d/rc.udev."
+          sleep 10
+          exit 1
+        fi
+
+        # Disable hotplug helper since udevd listens to netlink:
+        if [ -e /proc/sys/kernel/hotplug ]; then
+          echo "" > /proc/sys/kernel/hotplug
+        fi
+
+	if grep -qw devtmpfs /proc/filesystems ; then
+	   if ! check_mounted $UDEV_ROOT devtmpfs ; then
+		# umount shm if needed
+		check_mounted $UDEV_ROOT/shm tmpfs && umount -l $UDEV_ROOT/shm
+
+		# Umount pts if needed, we will remount it later:
+		check_mounted $UDEV_ROOT/pts devpts && umount -l $UDEV_ROOT/pts
+		
+		# Mount tmpfs on $UDEV_ROOT:
+		mount -n -t devtmpfs devtmpfs $UDEV_ROOT 
+	   fi
+	else 
+		# Mount tmpfs on $UDEV_ROOT:
+		if ! check_mounted $UDEV_ROOT tmpfs ; then
+		  # umount shm if needed
+		  check_mounted $UDEV_ROOT/shm tmpfs && umount -l $UDEV_ROOT/shm
+
+		  # Umount pts if needed, we will remount it later:
+		  check_mounted $UDEV_ROOT/pts devpts && umount -l $UDEV_ROOT/pts
+		
+		  # Mount tmpfs on $UDEV_ROOT:
+		  # the -n is because we don't want $UDEV_ROOT umounted when
+		  # someone (rc.[06]) calls umount -a
+		  mount -n -o mode=0755 -t tmpfs tmpfs $UDEV_ROOT 
+		
+		fi
+	fi
+	# Mount devpts
+	mount_devpts
+
+        if ! /sbin/pidof udevd 1>/dev/null 2>/dev/null; then # start udevd
+          echo "Starting udevd:  /sbin/udevd --daemon"
+          /sbin/udevd --daemon
+          # Since udev is just now being started we want to use add events:
+          echo "Triggering udev events:  /sbin/udevadm trigger --action=add"
+          # Call udevtrigger and udevsettle to do the device configuration:
+          /sbin/udevadm trigger --type=subsystems --action=add
+          /sbin/udevadm trigger --type=devices --action=add
+        else # trigger changes for already running udevd
+          # If the persistent rules files do not exist, trigger an add event:
+          if [ ! -r /etc/udev/rules.d/70-persistent-net.rules ]; then
+            # Test that we can actually write to the directory first:
+            if touch /etc/udev/rules.d/testfile 2> /dev/null ; then
+              rm -f /etc/udev/rules.d/testfile
+              # This should add persistent net/cd rules:
+              echo "Triggering udev to write persistent rules to /etc/udev/rules.d/"
+              /sbin/udevadm trigger --type=devices --action=add
+              sleep 3
+            fi
+          fi
+          # Since udevd is running, most of the time we only need change events:
+          echo "Triggering udev events:  /sbin/udevadm trigger --action=change"
+          /sbin/udevadm trigger --type=subsystems --action=change
+          /sbin/udevadm trigger --type=devices --action=change
+        fi
+        /sbin/udevadm settle --timeout=120
+        ;;
+    stop)
+	echo "Stopping udevd is STRONGLY discouraged and not supported."
+	echo "If you are sure you want to do this, use 'force-stop' instead."
+	;;
+    force-stop)
+	echo "Stopping udevd"
+	udevadm control --exit
+	killall udevd 2>/dev/null
+	;;
+    restart)
+	echo "Restarting udevd is STRONGLY discouraged and not supported."
+	echo "If you are sure you want to do this, use 'force-restart' instead."
+	;;
+    force-restart)
+	echo "Restarting udevd"
+	udevadm control --exit
+	sleep 3
+	udevd --daemon
+	;;
+    reload)
+	echo "Reloading udev rules"
+	udevadm control --reload
+	cp --preserve=all --recursive --update /lib/udev/devices/* $UDEV_ROOT
+	;;
+    force-reload)
+	echo "Updating all available device nodes in $UDEV_ROOT"
+	udevadm control --reload
+	rm -rf $UDEV_ROOT/.udev $UDEV_ROOT/disk
+	cp --preserve=all --recursive --update /lib/udev/devices/* $UDEV_ROOT
+	;;
+	
+    *)
+	echo "Usage: $0 {start|stop|restart|reload|force-reload}"
+	exit 1
+	;;
+esac
diff --git a/source.local/a/udev/config/rules.d/40-slackware.rules b/source.local/a/udev/config/rules.d/40-slackware.rules
new file mode 100644
index 0000000..9e8c634
--- /dev/null
+++ b/source.local/a/udev/config/rules.d/40-slackware.rules
@@ -0,0 +1,22 @@
+# /lib/udev/rules.d/40-slackware.rules
+#
+# Slackware custom udev rules
+# Also see the following Slackware-provided custom rules files:
+# 65-permissions.rules and 90-network.rules
+#
+# Any change in this file will be overwritten in upgrades. Put your
+# custom rules somewhere else (90-local.rules is a good idea).
+#
+# See the udev man page to know the parameters you can use in udev
+# rules.
+#
+
+# input devices
+KERNEL=="mice",		SYMLINK+="mouse"
+
+# Set rfkill device writable by netdev group
+KERNEL=="rfkill", GROUP:="netdev", MODE:="0664"
+
+# Mount fusectl filesystem
+KERNEL=="fuse", ACTION=="add", RUN+="/bin/mount -t fusectl fusectl /sys/fs/fuse/connections"
+
diff --git a/source.local/a/udev/config/rules.d/59-non-libata-devices.rules b/source.local/a/udev/config/rules.d/59-non-libata-devices.rules
new file mode 100644
index 0000000..4b1238a
--- /dev/null
+++ b/source.local/a/udev/config/rules.d/59-non-libata-devices.rules
@@ -0,0 +1,44 @@
+# Support for the deprecated IDE devices has been removed from the
+# default set of rules shipped with udev, but some administrators
+# might want (or need) the old ata drivers and thus build a custom
+# kernel, so we'll carry these on our own for now...
+
+#############################################################################
+
+# Old 50-udev-default.rules
+
+# floppy
+KERNEL=="hd*", SUBSYSTEMS=="ide", ATTRS{media}=="floppy"
+
+# cdrom
+SUBSYSTEM=="block", KERNEL=="hd*", SUBSYSTEMS=="ide", ATTRS{media}=="cdrom", GROUP="cdrom"
+
+#############################################################################
+
+# Old 60-persistent-storage.rules
+
+# never access non-cdrom removable ide devices, the drivers are causing event loops on open()
+KERNEL=="hd*[!0-9]", ATTR{removable}=="1", SUBSYSTEMS=="ide", ATTRS{media}=="disk|floppy", GOTO="old_persistent_storage_end"
+KERNEL=="hd*[0-9]", ATTRS{removable}=="1", GOTO="old_persistent_storage_end"
+
+# by-id (hardware serial number)
+KERNEL=="hd*[!0-9]", IMPORT{program}="ata_id --export $tempnode"
+KERNEL=="hd*[!0-9]", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/ata-$env{ID_SERIAL}"
+KERNEL=="hd*[0-9]", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/ata-$env{ID_SERIAL}-part%n"
+
+LABEL="old_persistent_storage_end"
+
+#############################################################################
+
+# Old ide stuff from our custom 65-permissions.rules
+
+# permissions for IDE floppy devices
+KERNEL=="hd*[!0-9]", SUBSYSTEMS=="ide", ATTRS{media}=="floppy", SYMLINK+="floppy floppy-%k"
+KERNEL=="hd*[0-9]", ATTRS{media}=="floppy", ATTRS{removable}=="1", SYMLINK+="floppy-%k"
+
+# put all removable devices in group "plugdev"
+KERNEL=="hd*[!0-9]", ATTR{removable}=="1", GROUP="plugdev"
+KERNEL=="hd*[0-9]", ATTRS{removable}=="1", GROUP="plugdev"
+
+#############################################################################
+
diff --git a/source.local/a/udev/config/rules.d/65-permissions.rules b/source.local/a/udev/config/rules.d/65-permissions.rules
new file mode 100644
index 0000000..6f82b0f
--- /dev/null
+++ b/source.local/a/udev/config/rules.d/65-permissions.rules
@@ -0,0 +1,41 @@
+# Slackware permission rules
+#
+# These rules are here instead of 40-slackware.rules because
+# many of them need to run after the block section in
+# 50-udev.default.rules
+#
+# Remember, in any upgrade, this file will be overwritten.
+# Put your custom rules somewhere else (90-local.rules is 
+# a good idea).
+#
+
+# all disks with group disk
+KERNEL!="fd*", SUBSYSTEM=="block",             GROUP="disk"
+
+# put all removable devices in group "plugdev"
+KERNEL=="sd*[!0-9]", ATTR{removable}=="1", GROUP="plugdev"
+KERNEL=="sd*[0-9]", ATTRS{removable}=="1", GROUP="plugdev"
+
+# Many hot-pluggable devices (ZIP, Jazz, LS-120, etc...)
+# need to be in plugdev, too.
+KERNEL=="diskonkey*",	GROUP="plugdev"
+KERNEL=="jaz*",		GROUP="plugdev"
+KERNEL=="pocketzip*",	GROUP="plugdev"
+KERNEL=="zip*",		GROUP="plugdev"
+KERNEL=="ls120",	GROUP="plugdev"
+KERNEL=="microdrive*",	GROUP="plugdev"
+
+# CD group and permissions 
+ENV{ID_CDROM}=="?*", 		GROUP="cdrom", MODE="0660"
+KERNEL=="pktcdvd",		GROUP="cdrom", MODE="0660"
+KERNEL=="pktcdvd[0-9]*",	GROUP="cdrom", MODE="0660"
+# permissions for SCSI sg devices
+SUBSYSTEMS=="scsi", KERNEL=="s[gt][0-9]*", ATTRS{type}=="5", \
+				GROUP="cdrom", MODE="0660"
+
+# Make DRI video devices usable by anyone in group "video":
+KERNEL=="card[0-9]*",GROUP:="video"
+
+# Make the real time clock readable by all, and writable by root:
+KERNEL=="rtc|rtc0",             MODE="0644"
+
diff --git a/source.local/a/udev/config/udev.conf b/source.local/a/udev/config/udev.conf
new file mode 100644
index 0000000..c8506e4
--- /dev/null
+++ b/source.local/a/udev/config/udev.conf
@@ -0,0 +1,14 @@
+# udev.conf
+# The main config file for udev
+#
+# This file can be used to override some of udev's default values for where it
+# looks for files, and where it places device nodes.
+
+# udev_root - where in the filesystem to place the device nodes
+udev_root="/dev/"
+
+# udev_log - The initial syslog(3) priority: "err", "info", "debug" or
+# its numerical equivalent.  For runtime debugging, the daemons
+# internal state can be changed with:  udevadm control log_priority=<value>
+udev_log="err"
+
diff --git a/source.local/a/udev/doinst.sh.gz b/source.local/a/udev/doinst.sh.gz
new file mode 100644
index 0000000..908ca66
--- /dev/null
+++ b/source.local/a/udev/doinst.sh.gz
diff --git a/source.local/a/udev/fix-42-usb-hid-pm.rules.diff.gz b/source.local/a/udev/fix-42-usb-hid-pm.rules.diff.gz
new file mode 100644
index 0000000..44ea45b
--- /dev/null
+++ b/source.local/a/udev/fix-42-usb-hid-pm.rules.diff.gz
diff --git a/source.local/a/udev/rule_generator.diff.gz b/source.local/a/udev/rule_generator.diff.gz
new file mode 100644
index 0000000..3e2f61e
--- /dev/null
+++ b/source.local/a/udev/rule_generator.diff.gz
diff --git a/source.local/a/udev/slack-desc b/source.local/a/udev/slack-desc
new file mode 100644
index 0000000..c411756
--- /dev/null
+++ b/source.local/a/udev/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+    |-----handy-ruler-------------------------------------------------------|
+udev: udev (dynamic device directory system)
+udev:
+udev: udev provides a dynamic device directory containing only the files
+udev: for the devices which are actually present.  It creates or removes
+udev: device node files usually located in the /dev directory.
+udev:
+udev: udev requires a 2.6 or newer kernel.
+udev:
+udev: Kay Sievers is the udev maintainer.
+udev:
+udev:
diff --git a/source.local/a/udev/udev-ata_id-fixup-all-8-not-only-6-bytes-of-the-fw_rev.patch.gz b/source.local/a/udev/udev-ata_id-fixup-all-8-not-only-6-bytes-of-the-fw_rev.patch.gz
new file mode 100644
index 0000000..faede0a
--- /dev/null
+++ b/source.local/a/udev/udev-ata_id-fixup-all-8-not-only-6-bytes-of-the-fw_rev.patch.gz
diff --git a/source.local/a/udev/udev.SlackBuild b/source.local/a/udev/udev.SlackBuild
new file mode 100755
index 0000000..84bf6d8
--- /dev/null
+++ b/source.local/a/udev/udev.SlackBuild
@@ -0,0 +1,176 @@
+#!/bin/sh
+
+# Copyright 2006, 2008, 2009, 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+# Modified 2012 by Eric Hameleers <alien at slackware.com> for ARM port.
+
+
+VERSION=${VERSION:-$(echo udev-*.tar.* | cut -d - -f 2 | rev | cut -f 3- -d . | rev)}
+BUILD=${BUILD:-5}
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+if [ -e $CWD/machine.conf ]; then
+  . $CWD/machine.conf ]
+elif [ -e /etc/slackbuild/machine.conf ]; then
+  . /etc/slackbuild/machine.conf ]
+else
+  # Automatically determine the architecture we're building on:
+  if [ -z "$ARCH" ]; then
+    case "$( uname -m )" in
+      i?86) export ARCH=i486 ;;
+      arm*) export ARCH=arm ;;
+      # Unless $ARCH is already set, use uname -m for all other archs:
+         *) export ARCH=$( uname -m ) ;;
+    esac
+  fi
+  if [ "$ARCH" = "x86_64" ]; then
+    LIBDIRSUFFIX="64"
+  else
+    LIBDIRSUFFIX=""
+  fi
+fi
+
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-udev
+
+rm -rf $PKG
+mkdir -p $TMP $PKG/lib/udev
+cd $TMP
+rm -rf udev-$VERSION
+tar xvf $CWD/udev-$VERSION.tar.xz || exit 1
+cd udev-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+# Fix ata_id (remove with udev-186+)
+zcat $CWD/udev-ata_id-fixup-all-8-not-only-6-bytes-of-the-fw_rev.patch.gz | patch -p1 || exit 1
+
+# Fix 42-usb-hid-pm.rules (remove with udev-187+)
+zcat $CWD/fix-42-usb-hid-pm.rules.diff.gz | patch -p1 --verbose || exit 1
+
+# Fixup the rule generator for our use
+zcat $CWD/rule_generator.diff.gz | patch -p1 --verbose || exit 1
+
+# static libudev is needed for lvm2
+# --enable-udev_acl was removed (will be part of future CK release)
+# --enable-floppy support was also disabled by default in 173
+# --enable-rule_generator was disabled by default in 175
+./configure \
+  --prefix=/usr \
+  --with-rootprefix=/ \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --with-rootlibdir=/lib${LIBDIRSUFFIX} \
+  --with-firmware-path=/lib/firmware/updates:/lib/firmware \
+  --sysconfdir=/etc \
+  --bindir=/sbin \
+  --sbindir=/sbin \
+  --libexecdir=/lib \
+  --enable-introspection \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/udev-$VERSION \
+  --enable-floppy \
+  --enable-static \
+  --enable-rule_generator \
+  --build=$TARGET || exit 1
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+# scsi_id is needed by multipath
+( cd $PKG/sbin ; ln -s ../lib/udev/scsi_id scsi_id )
+
+# Put udevd back in /sbin
+mv $PKG/lib/udev/udevd $PKG/sbin
+ln -s /sbin/udevd $PKG/lib/udev/udevd
+
+mkdir -p \
+  $PKG/run \
+  $PKG/{etc,lib}/modprobe.d \
+  $PKG/etc/rc.d \
+  $PKG/etc/udev/rules.d \
+  $PKG/lib/firmware
+
+# Yes, these will clobber existing config files.
+cp -a $CWD/config/udev.conf $PKG/etc/udev/udev.conf
+
+# Copy Slackware custom rules
+cp -a $CWD/config/rules.d/* $PKG/lib/udev/rules.d/
+
+# Now the init script and module-init-tools stuff
+cp -a $CWD/config/rc.d/rc.udev.new $PKG/etc/rc.d/rc.udev.new
+cp -a $CWD/config/modprobe.d/*.conf $PKG/lib/modprobe.d/
+cp -a $CWD/config/modprobe.d/README $PKG/etc/modprobe.d/
+
+chown -R root:root $PKG/etc $PKG/lib/modprobe.d
+find $PKG/etc $PKG/lib/modprobe.d -type f -exec chmod 644 {} \;
+find $PKG/etc -type d -exec chmod 755 {} \;
+chmod 0755 $PKG/etc/rc.d/rc.udev.new
+
+# Add extra device nodes to the package that udev doesn't make:
+tar xvf $CWD/udev-fixed-devices.tar.gz -C $PKG
+
+chown -R root:root $PKG/lib/udev
+chmod 0755 $PKG/lib/udev/*
+
+mkdir -p $PKG/usr/doc/udev-$VERSION
+cp -a \
+  COPYING* README* TODO \
+  $PKG/usr/doc/udev-$VERSION
+
+# Don't package the API docs:
+rm -rf $PKG/usr/share/gtk-doc ; rmdir $PKG/usr/share 2>/dev/null
+
+# Compress and fix manpage symlinks:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+mkdir -p $PKG/install
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c y $TMP/udev-$VERSION-$ARCH-$BUILD.txz
+