From 5a3d8e493b8878969c3f45f121395a2ba49be7dc Mon Sep 17 00:00:00 2001 From: Tonus Date: Fri, 20 Jan 2023 05:19:58 +0000 Subject: python/python3-xlib: Added (X Library module for Python 3) Signed-off-by: Willy Sudiarto Raharjo --- python/python3-xlib/README | 10 ++++ python/python3-xlib/python3-xlib.SlackBuild | 78 +++++++++++++++++++++++++++++ python/python3-xlib/python3-xlib.info | 10 ++++ python/python3-xlib/slack-desc | 19 +++++++ 4 files changed, 117 insertions(+) create mode 100644 python/python3-xlib/README create mode 100644 python/python3-xlib/python3-xlib.SlackBuild create mode 100644 python/python3-xlib/python3-xlib.info create mode 100644 python/python3-xlib/slack-desc (limited to 'python') diff --git a/python/python3-xlib/README b/python/python3-xlib/README new file mode 100644 index 0000000000..93cefe5199 --- /dev/null +++ b/python/python3-xlib/README @@ -0,0 +1,10 @@ +The Python X Library is intended to be a fully functional X client +library for Python programs. It is written entirely in Python, in +contrast to earlier X libraries for Python which were interfaces to +the C Xlib. + +This is possible to do since X client programs communicate with the X +server via the X protocol. The communication takes place over TCP/IP, +Unix sockets, DECnet or any other streaming network protocol. The C +Xlib is merely an interface to this protocol, providing functions +suitable for a C environment. diff --git a/python/python3-xlib/python3-xlib.SlackBuild b/python/python3-xlib/python3-xlib.SlackBuild new file mode 100644 index 0000000000..b031456d57 --- /dev/null +++ b/python/python3-xlib/python3-xlib.SlackBuild @@ -0,0 +1,78 @@ +#!/bin/bash +# Slackware build script for python3-xlib + +# Copyright 2023 Tonus Paris +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +cd $(dirname $0) ; CWD=$(pwd) + +PRGNAM=python3-xlib +VERSION=${VERSION:-0.26} +BUILD=${BUILD:-1} +TAG=${TAG:-_SBo} +PKGTYPE=${PKGTYPE:-tgz} +SRCNAM=${SRCNAM:-python-xlib} + +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) ARCH=i586 ;; + arm*) ARCH=arm ;; + *) ARCH=$( uname -m ) ;; + esac +fi + +# If the variable PRINT_PACKAGE_NAME is set, then this script will report what +# the name of the created package would be, and then exit. This information +# could be useful to other scripts. +if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then + echo "$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.$PKGTYPE" + exit 0 +fi + +TMP=${TMP:-/tmp/SBo} +PKG=$TMP/package-$PRGNAM +OUTPUT=${OUTPUT:-/tmp} + +set -eu + +rm -rf $PKG +mkdir -p $TMP $PKG $OUTPUT +cd $TMP +rm -rf $SRCNAM-$VERSION +tar xvf $CWD/$SRCNAM-$VERSION.tar.bz2 +cd $SRCNAM-$VERSION +chown -R root:root . +find -L . \ + \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \ + -o -perm 511 \) -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \ + -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \; + + python3 setup.py install --root=$PKG + +mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +cp -a CHANGELOG.md LICENSE PKG-INFO README.rst TODO $PKG/usr/doc/$PRGNAM-$VERSION +cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc + +cd $PKG +/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.$PKGTYPE diff --git a/python/python3-xlib/python3-xlib.info b/python/python3-xlib/python3-xlib.info new file mode 100644 index 0000000000..952fd4a4ac --- /dev/null +++ b/python/python3-xlib/python3-xlib.info @@ -0,0 +1,10 @@ +PRGNAM="python3-xlib" +VERSION="0.26" +HOMEPAGE="https://github.com/python-xlib/python-xlib" +DOWNLOAD="https://github.com/python-xlib/python-xlib/releases/download/0.26/python-xlib-0.26.tar.bz2" +MD5SUM="678871a692c5409a6d6b5aaaf7f6e60d" +DOWNLOAD_x86_64="" +MD5SUM_x86_64="" +REQUIRES="" +MAINTAINER="Tonus" +EMAIL="tonus1@free.fr" diff --git a/python/python3-xlib/slack-desc b/python/python3-xlib/slack-desc new file mode 100644 index 0000000000..a631a5cfd4 --- /dev/null +++ b/python/python3-xlib/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. +# Line up the first '|' above the ':' following the base package name, and +# the '|' on the right side marks the last column you can put a character in. +# You must make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':' except on otherwise blank lines. + + |-----handy-ruler------------------------------------------------------| +python3-xlib: python3-xlib (X Library module for Python 3) +python3-xlib: +python3-xlib: The Python X Library is intended to be a fully functional X client +python3-xlib: library for Python programs. It is written entirely in Python, in +python3-xlib: contrast to earlier X libraries for Python which were interfaces to +python3-xlib: the C Xlib. The communication takes place over TCP/IP, Unix sockets, +python3-xlib: DECnet or any other streaming network protocol. The C Xlib is merely +python3-xlib: an interface to this protocol, providing functions suitable for a C +python3-xlib: environment. +python3-xlib: +python3-xlib: Homepage: https://github.com/python-xlib/python-xlib -- cgit v1.2.3-79-gdb01