From 70b689e6bf00338f55ae2daf1c2d0c2d972e00e8 Mon Sep 17 00:00:00 2001
From: Eric Hameleers <alien@slackware.com>
Date: Mon, 5 Oct 2020 15:34:46 +0200
Subject: setup2hd: add option to install regular Slackware via network mirror

The setup2hd script is a modified Slackware installer. For liveslak I had
originally removed all the usual SOURCE selections and only allowed for
the installation of the Live OS to harddisk.
However, requests were sent to also support a regular installation
of Slackware using the Live ISO. That is why I have now re-added all the
Slackware network install choices (via NFS, HTTP, FTP or Samba mirror).
I still left out the Slackware installation using local media;
the Live ISO does not contain regular Slackware packages so that
would not make sense.
---
 setup2hd/setup.slackware.tpl | 155 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 155 insertions(+)
 create mode 100644 setup2hd/setup.slackware.tpl

(limited to 'setup2hd/setup.slackware.tpl')

diff --git a/setup2hd/setup.slackware.tpl b/setup2hd/setup.slackware.tpl
new file mode 100644
index 0000000..9461d90
--- /dev/null
+++ b/setup2hd/setup.slackware.tpl
@@ -0,0 +1,155 @@
+ # Slackware installation routine as taken from original 'setup':
+ if [ "$MAINSELECT" = "INSTALL" ]; then
+  if [ ! -r $TMP/SeTSERIES -o ! -r $TMP/SeTsource -o ! -r $TMP/SeTnative ]; then
+   dialog --title "CANNOT INSTALL SOFTWARE YET" --msgbox "\
+\n\
+Before you can install software, complete the following tasks:\n\
+\n\
+1. Select your source media.\n\
+2. Set up your target Linux partition(s).\n\
+3. Select which software categories to install.\n\
+\n\
+You may also optionally remap your keyboard and set up your\n\
+swap partition(s). \n\
+\n\
+Press ENTER to return to the main menu." 16 68
+   continue
+  fi
+  SERIES="`cat $TMP/SeTSERIES`"
+  SOURCE_DEVICE="`cat $TMP/SeTsource`"
+  IGNORE_TAGFILES=""
+  while [ 0 ]; do
+   dialog --title "SELECT PROMPTING MODE" --default-item "terse" --menu \
+   "Now you must select the type of prompts you'd like to see during the \
+installation process. If you have the drive space, the 'full' option \
+is quick, easy, and by far the most foolproof choice. The 'newbie' \
+mode provides the most information but is much more time-consuming \
+(presenting the packages one by one) than the menu-based choices. \
+Otherwise, you can pick packages from menus \
+using 'expert' or 'menu' mode. Which type of prompting would you like \
+to use?" \
+   20 76 7 \
+   "full" "Install everything (9+ GB of software, RECOMMENDED!)" \
+   "terse" "Like 'full', but display one line per package during install" \
+   "menu" "Choose individual packages from interactive menus" \
+   "expert" "This is actually the same as the \"menu\" option" \
+   "newbie" "Use verbose prompting (the X series takes one year)" \
+   "custom" "Use custom tagfiles in the package directories" \
+   "tagpath" "Use tagfiles in the subdirectories of a custom path" \
+   "help" "Read the prompt mode help file" 2> $TMP/SeTpmode
+   if [ ! $? = 0 ]; then
+    rm -f $TMP/SeTpmode
+    exit
+   fi
+   MODE="`cat $TMP/SeTpmode`"
+   rm -f $TMP/SeTtagext
+   if [ "$MODE" = "help" ]; then
+    dialog --title "PROMPT MODE HELP" --exit-label OK --textbox "/usr/lib/setup/PROMPThelp" 19 65
+   fi
+   if [ "$MODE" = "tagpath" ]; then
+    dialog --title "PROVIDE A CUSTOM PATH TO YOUR TAGFILES" --inputbox \
+    "If you're installing from CD or DVD, it's impossible to edit the \
+tagfiles that are in the package directories. In this case, you might \
+want to provide a path to your custom tagfiles. As an example, you \
+could create a /tagfiles directory and mount a floppy disk containing \
+the tagfiles on that directory. Then you'd enter '/tagfiles' at the \
+prompt below. The setup program will look for your tagfile in \
+SUBDIRECTORIES of the path you provide, such as /tagfiles/a, \
+/tagfiles/ap, /tagfiles/d, and so on. You only need to provide a \
+subdirectory and tagfile for the first disk of each series to be \
+installed. If a custom tagfile is not found at the path you provide, \
+setup will revert to the default tagfiles. Please enter the path to your \
+custom tagfiles:" \
+    19 71 2> $TMP/SeTtagpath
+    if [ ! $? = 0 ]; then
+     continue
+    fi
+    if [ -r $TMP/SeTtagpath ]; then
+     if [ "`cat $TMP/SeTtagpath`" = "" ]; then
+      rm -f $TMP/SeTtagpath
+     elif [ ! -d "$(cat $TMP/SeTtagpath)" ]; then
+       dialog --title "NOT A VALID DIRECTORY" --msgbox \
+"Sorry, but the $(cat $TMP/SeTtagpath) directory could not be located. \
+Press ENTER to go back to the SELECT PROMPTING MODE menu." \
+7 65
+      rm -f $TMP/SeTtagpath
+      continue
+     fi
+    fi
+    break;
+   fi
+   if [ "$MODE" = "newbie" ]; then 
+    dialog --infobox "'newbie' prompt mode selected.  Using default tagfiles \
+and verbose package prompting." 4 50
+    break;
+   fi 
+   if [ "$MODE" = "custom" ]; then
+    dialog --title "ENTER CUSTOM EXTENSION" --inputbox "Now, enter the custom \
+extension you have used for your tagfiles. This must be a valid MS-DOS format \
+file extension consisting of a period followed by three characters. For \
+example, I use '.pat'. You might see my tagfiles on your disks. :^)" \
+12 60 2> $TMP/SeTtagext
+    if [ ! $? = 0 ]; then
+     continue
+    fi
+    if [ -r $TMP/SeTtagext ]; then
+     if [ "`cat $TMP/SeTtagext`" = "" ]; then
+      rm -f $TMP/SeTtagext
+     fi
+    fi
+    dialog --infobox "'custom' prompt mode selected. Using prompting defaults \
+found in custom tagfiles." 4 50
+    break;
+   fi
+   if [ "$MODE" = "full" ]; then
+    IGNORE_TAGFILES="-ignore_tagfiles"
+    dialog --infobox "Full installation mode. Installing all software \
+packages without prompting." 4 45
+    break;
+   fi
+   if [ "$MODE" = "terse" ]; then
+    setterm -background cyan -foreground black -blank 0
+    clear
+    IGNORE_TAGFILES="-ignore_tagfiles"
+    echo
+    echo
+    echo "Full (terse display) installation mode."
+    echo
+    echo "A one-line description will be displayed as each package is installed."
+    echo
+    break;
+   fi
+   if [ "$MODE" = "menu" ]; then
+    dialog --infobox "'menu' prompt mode selected. Using interactive menus \
+to choose subsystems of related packages." 4 60
+    break;
+   fi
+   if [ "$MODE" = "expert" ]; then
+    dialog --infobox "'expert' prompt mode selected. Using interactive menus \
+to choose packages individually." 4 60
+    break;
+   fi 
+  done
+  export MAKETAG;
+  sleep 1
+  # On a new system, make /etc/mtab a symlink to /proc/mounts:
+  if [ ! -r $T_PX/etc/mtab ]; then
+    mkdir -p $T_PX/etc
+    ( cd $T_PX/etc ; ln -sf /proc/mounts mtab )
+  fi
+  # Do the package install:
+  if [ -r $TMP/SeTCDdev ]; then # only try to remount media if it's a CD/DVD
+    slackinstall --device `cat $TMP/SeTCDdev` --promptmode $MODE --srcpath `cat $TMP/SeTDS` --mountpoint /var/log/mount --target $T_PX --series $SERIES
+  elif [ -r $TMP/SeTremotesvr ]; then
+    slackinstall --device noremount --promptmode $MODE --srcpath `cat $TMP/SeTDS` --mountpoint /var/log/mount --target $T_PX --series $SERIES --net `cat $TMP/SeTremotesvr`
+  else
+    slackinstall --device noremount --promptmode $MODE --srcpath `cat $TMP/SeTDS` --mountpoint /var/log/mount --target $T_PX --series $SERIES
+  fi
+  if [ $MODE = terse ]; then
+    # Let's pause a moment and then restore the terminal settings
+    sleep 1
+    setterm -background black -foreground white -blank 0
+  fi
+  MAINSELECT="CONFIGURE"
+ fi
+ # End Slackware installation routine.
-- 
cgit v1.2.3