From dce5d0d1da24641670b607933804b524e2347980 Mon Sep 17 00:00:00 2001
From: Eric Hameleers <alien@slackware.com>
Date: Mon, 23 Jan 2017 14:33:46 +0100
Subject: Make it obvious that some scripts are templates and cannot be used
 as-is.

This affects:
- pxeserver
- setup2hd
Both have been renamed with extension '.tpl' as indication that they are
templates.  The 'make_slackware_live.sh' script performs a series of
substitutions on them to produce the actual scripts inside the ISO.
---
 setup2hd.tpl | 415 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 415 insertions(+)
 create mode 100755 setup2hd.tpl

(limited to 'setup2hd.tpl')

diff --git a/setup2hd.tpl b/setup2hd.tpl
new file mode 100755
index 0000000..8bd7eed
--- /dev/null
+++ b/setup2hd.tpl
@@ -0,0 +1,415 @@
+#!/bin/sh
+#
+# Copyright 1993,1994,1999  Patrick Volkerding, Moorhead, Minnesota USA
+# Copyright 2001, 2003, 2004  Slackware Linux, Inc., Concord, CA
+# Copyright 2006, 2007  Patrick Volkerding, Sebeka, Minnesota USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is 
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, 
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR 
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# As always, bug reports, suggestions, etc: volkerdi@slackware.com
+#
+# Modifications 2016, 2017 by Eric Hameleers <alien@slackware.com>
+#
+
+# The Slackware setup depends on english language settings because it
+# parses program output like that of "fdisk -l". So, we need to override
+# the Live user's local language settings here:
+export LANG=C
+export LC_ALL=C
+
+if [ ! -d /mnt/livemedia/@LIVEMAIN@/system ]; then
+ dialog --title "LIVE MEDIA NOT ACCESSIBLE" --msgbox "\
+\n\
+Before you can install software, complete the following tasks:\n\
+\n\
+1. Mount your Live media partition on /mnt/livemedia." 16 68
+  exit 1
+fi
+TMP=/var/log/setup/tmp
+if [ ! -d $TMP ]; then
+  mkdir -p $TMP
+fi
+rm -f $TMP/SeT*
+# If a keymap was set up, restore that data:
+if [ -r $TMP/Pkeymap ]; then
+  cp $TMP/Pkeymap $TMP/SeTkeymap
+fi
+echo "on" > $TMP/SeTcolor # turn on color menus
+PATH="$PATH:/usr/share/@LIVEMAIN@"
+export PATH;
+export COLOR=on
+#echo
+#echo
+#echo "Probing disk partitions.  (Hint: if your ATAPI CD-ROM causes timeouts"
+#echo "during the probe process, try hitting the eject button)"
+#echo
+#sleep 5
+#
+# Before probing, activate any LVM partitions
+# that may exist from before the boot:
+vgchange -ay 1> /dev/null 2> /dev/null
+if probe -l 2> /dev/null | grep -E 'Linux$' 1> /dev/null 2> /dev/null ; then
+ probe -l 2> /dev/null | grep -E 'Linux$' | sort 1> $TMP/SeTplist 2> /dev/null
+else
+ dialog --title "NO LINUX PARTITIONS DETECTED" \
+ --msgbox "There don't seem to be any partitions on this machine of type \
+Linux.  You'll need to make at least one of these to install Linux.  \
+To do this, you'll need to leave 'setup', and make the partitions using \
+'cfdisk' (MBR partitions) or 'cgdisk' (GPT partitions).  For more \
+information, read the 'setup' help file from the next menu." 10 64
+fi
+if [ -d /sys/firmware/efi ]; then
+  if ! probe -l 2> /dev/null | grep "EFI System Partition" 1> /dev/null 2> /dev/null ; then
+     dialog --title "NO EFI SYSTEM PARTITION DETECTED" \
+ --msgbox "This machine appears to be using EFI/UEFI, but no EFI System \
+Partition was found.  You'll need to make an EFI System Partition in order \
+to boot from the hard drive.  To do this, leave 'setup', and \
+use 'cgdisk' to make a 100MB partition of type EF00.  For more information, \
+read the 'setup' help file from the next menu." 10 64
+  fi
+fi
+T_PX="/setup2hd"
+mkdir -p ${T_PX}
+echo "$T_PX" > $TMP/SeTT_PX
+ROOT_DEVICE="`mount | grep "on / " | cut -f 1 -d ' '`"
+echo "$ROOT_DEVICE" > $TMP/SeTrootdev
+if mount | grep /var/log/mount 1> /dev/null 2> /dev/null ; then # clear source
+ umount /var/log/mount                                           # location
+fi
+# Anything mounted on /var/log/mount now is a fatal error:
+if mount | grep /var/log/mount 1> /dev/null 2> /dev/null ; then
+  echo "Can't umount /var/log/mount.  Reboot machine and run setup again."
+  exit
+fi
+# If the mount table is corrupt, the above might not do it, so we will
+# try to detect Linux and FAT32 partitions that have slipped by:
+if [ -d /var/log/mount/lost+found -o -d /var/log/mount/recycled \
+     -o -r /var/log/mount/io.sys ]; then
+  echo "Mount table corrupt.  Reboot machine and run setup again."
+  exit
+fi
+rm -f /var/log/mount 2> /dev/null
+rmdir /var/log/mount 2> /dev/null
+mkdir /var/log/mount 2> /dev/null
+
+while [ 0 ]; do
+
+ dialog --title "@CDISTRO@ Linux Setup (version @SL_VERSION@)" \
+--menu \
+"Welcome to @CDISTRO@ Linux Setup (Live Edition).\n\
+Select an option below using the UP/DOWN keys and SPACE or ENTER.\n\
+Alternate keys may also be used: '+', '-', and TAB." 18 72 9 \
+"HELP" "Read the @CDISTRO@ Setup HELP file" \
+"KEYMAP" "Remap your keyboard if you're not using a US one" \
+"ADDSWAP" "Set up your swap partition(s)" \
+"TARGET" "Set up your target partitions" \
+"INSTALL" "Install @CDISTRO@ Live to disk" \
+"CONFIGURE" "Reconfigure your Linux system" \
+"EXIT" "Exit @CDISTRO@ Linux Setup" 2> $TMP/hdset
+ if [ ! $? = 0 ]; then
+  rm -f $TMP/hdset $TMP/SeT*
+  exit
+ fi
+ MAINSELECT="`cat $TMP/hdset`"
+ rm $TMP/hdset
+
+ # Start checking what to do. Some modules may reset MAINSELECT to run the
+ # next item in line.
+
+ if [ "$MAINSELECT" = "HELP" ]; then
+  SeTfdHELP
+ fi
+
+ if [ "$MAINSELECT" = "KEYMAP" ]; then
+  SeTkeymap
+  if [ -r $TMP/SeTkeymap ]; then
+   MAINSELECT="ADDSWAP" 
+  fi
+ fi
+ 
+ if [ "$MAINSELECT" = "MAKE TAGS" ]; then
+  SeTmaketag
+ fi
+ 
+ if [ "$MAINSELECT" = "ADDSWAP" ]; then
+  SeTswap
+  if [ -r $TMP/SeTswap ]; then
+   MAINSELECT="TARGET"
+  elif [ -r $TMP/SeTswapskip ]; then
+   # Go ahead to TARGET without swap space:
+   MAINSELECT="TARGET"
+  fi
+ fi
+
+ if [ "$MAINSELECT" = "TARGET" ]; then
+  SeTpartitions
+  SeTEFI
+  SeTDOS
+  if [ -r $TMP/SeTnative ]; then
+   MAINSELECT="INSTALL"
+  fi
+ fi
+
+ if [ "$MAINSELECT" = "INSTALL" ]; then
+  if [ ! -r $TMP/SeTnative ]; then
+   dialog --title "CANNOT INSTALL SOFTWARE YET" --msgbox "\
+\n\
+Before you can install software, complete the following tasks:\n\
+\n\
+1. Set up your target Linux partition(s).\n\
+\n\
+You may also optionally remap your keyboard and set up your\n\
+swap partition(s). \n\
+\n\
+Press ENTER to return to the main menu." 16 68
+   continue
+  fi
+
+  # --------------------------------------------- #
+  #   Slackware Live Edition - install to disk:   #
+  # --------------------------------------------- #
+
+  # Buy us some time while we are calculating disk usage:
+  dialog --title "WELCOME TO @UDISTRO@ LIVE (@LIVEDE@)" --infobox \
+   "\nCalculating disk usage, please be patient ..." 5 65
+
+  ACT_MODS=$(ls -rt --indicator-style=none /mnt/live/modules/ |wc -l)
+  TOT_MODS=$(find /mnt/livemedia/@LIVEMAIN@/ -type f -name "*.sxz" |wc -l)
+  DU_LIVE=$(du -s /mnt/@LIVEMAIN@fs/ |tr -s '\t' ' ' |cut -f1 -d' ')
+  PARTFREE=$(df -P -BM $T_PX |tail -1 |tr -s '\t' ' ' |cut -d' ' -f4)
+  PARTFREE=${PARTFREE%M}
+
+  # Warn when it looks we have insufficient room:
+  if [ $PARTFREE -lt $(($DU_LIVE/1024)) ]; then
++    dialog --title "WELCOME TO @UDISTRO@ LIVE (@LIVEDE@)" --yesno \
+   "\nAvailable space: $PARTFREE MB\nRequired space: $(($DU_LIVE/1024))\nIt looks like your hard drive partition is too small.\nDo you want to continue?" 10 65
+    retval=$?
+    if [ $retval = 1 ]; then
+      umount $T_PX
+      exit 1
+    fi
+  else
+    dialog --title "WELCOME TO @UDISTRO@ LIVE (@LIVEDE@)" --msgbox \
+   "\nAvailable space: $PARTFREE MB\nRequired space: $(($DU_LIVE/1024)) MB\nIt looks like you're good to go!" 10 65
+  fi
+
+  (
+    # Install the Live OS by rsyncing the readonly overlay to the harddisk:
+    rsync -Hav --progress --no-inc-recursive /mnt/@LIVEMAIN@fs/ $T_PX/ \
+      | awk '{ if (index($0, "to-chk=") > 0) { split($0, pieces, "to-chk="); split(pieces[2], term, ")"); split(term[1], division, "/"); print (1-(division[1]/division[2]))*100 };  fflush(); }' \
+      | sed --unbuffered 's/^\([0-9]*\).*/\1/'
+  ) | dialog --title "INSTALLING @UDISTRO@ LIVE (@LIVEDE@) TO DISK" --gauge \
+       "\nProcessing ${TOT_MODS} @CDISTRO@ Live modules ($(( $DU_LIVE/1024 )) MB)" 8 65
+
+  #
+  # Live OS Post Install routine. If you want, you can override this routine
+  # by (re-)defining this function "live_post_install()" in a file called
+  # "/usr/share/@LIVEMAIN@/setup2hd.@DISTRO@".
+  #
+
+  live_post_install () {
+    # Re-use some of the custom configuration from 0099-@DISTRO@_zzzconf-*.sxz
+    # (some of these may not be present but the command will not fail):
+    dialog --title "POST-INSTALL @UDISTRO@ LIVE (@LIVEDE@) DATA" --infobox \
+     "\nCopying Live modifications to hard disk ..." 5 65
+    # Do not overwrite a custom keymap:
+    if [ ! -f $T_PX/etc/rc.d/rc.keymap ]; then
+      unsquashfs -f -dest $T_PX \
+        /mnt/livemedia/@LIVEMAIN@/system/0099*zzzconf*.sxz \
+        /etc/rc.d/rc.keymap
+    fi
+    unsquashfs -f -dest $T_PX \
+      /mnt/livemedia/@LIVEMAIN@/system/0099*zzzconf*.sxz \
+      /etc/X11/xdm/liveslak-xdm \
+      /etc/X11/xorg.conf.d/30-keyboard.conf \
+      /etc/inittab \
+      /etc/profile.d/lang.sh \
+      /etc/rc.d/rc.font \
+      /etc/rc.d/rc.gpm \
+      /etc/slackpkg
+    # Point xdm to the custom /etc/X11/xdm/liveslak-xdm/xdm-config:
+    sed -i ${T_PX}/etc/rc.d/rc.4 -e 's,bin/xdm -nodaemon,& -config /etc/X11/xdm/liveslak-xdm/xdm-config,'
+    # Remove the marker file from the filesystem root:
+    rm -f ${T_PX}/@MARKER@
+
+    cat << EOF > $TMP/tempmsg
+
+ @CDISTRO@ Live Edition (@LIVEDE@) has been installed to your hard drive!
+ We installed the ${ACT_MODS} active modules (out of ${TOT_MODS} available).
+ The following configuration was copied from the Live OS to your harddisk:
+  - console font
+  - default runlevel
+  - keyboard layout
+  - language setting
+ After finishing system configuration and before rebooting, you can add any further Live modules from /@LIVEMAIN@/addons/ and /@LIVEMAIN@/optional/ to your hard drive, using a command similar to this:
+    # unsquashfs -f -dest $T_PX /mnt/livemedia/@LIVEMAIN@/addons/mymodule.sxz
+
+EOF
+    dialog --title "POST INSTALL HINTS AND TIPS" --msgbox "`cat $TMP/tempmsg`" \
+      20 65
+    rm $TMP/tempmsg
+
+    MAINSELECT="CONFIGURE"
+  }
+
+  if [ -f /usr/share/@LIVEMAIN@/setup2hd.@DISTRO@ ]; then
+    # If the setup2hd post-configuration file exists, source it.
+    # The file should re-define the live_post_install() function.
+    . /usr/share/@LIVEMAIN@/setup2hd.@DISTRO@
+  fi
+
+  # Now, execute the function - either our own built-in version
+  # or the re-defined function from the custom setup2hd.@DISTRO@ file.
+  live_post_install
+
+  # --------------------------------------------- #
+  # Slackware Live Edition - end install to disk: #
+  # --------------------------------------------- #
+
+ fi
+
+ if [ "$MAINSELECT" = "CONFIGURE" ]; then
+  # Patch (e)liloconfig on the target systems to remove hardcoded /mnt:
+  if [ -f /sbin/liloconfig -a -f $T_PX/sbin/liloconfig ]; then
+    cat /sbin/liloconfig > $T_PX/sbin/liloconfig
+  fi
+  if [ -f /usr/sbin/eliloconfig -a -f $T_PX/usr/sbin/eliloconfig ]; then
+    cat /usr/sbin/eliloconfig > $T_PX/usr/sbin/eliloconfig
+  fi
+  SeTconfig
+  REPLACE_FSTAB=Y
+  if [ -r $TMP/SeTnative ]; then
+   if [ -r $T_PX/etc/fstab ]; then
+    dialog --title "REPLACE /etc/fstab?" --yesno "You already have an \
+/etc/fstab on your install partition.  If you were just adding software, \
+you should probably keep your old /etc/fstab.  If you've changed your \
+partitioning scheme, you should use the new /etc/fstab.  Do you want \
+to replace your old /etc/fstab with the new one?" 10 58
+    if [ ! $? = 0 ]; then
+     REPLACE_FSTAB=N
+    fi
+   fi
+   if [ "$REPLACE_FSTAB" = "Y" ]; then
+    cat /dev/null > $T_PX/etc/fstab
+    if [ -r $TMP/SeTswap ]; then
+     cat $TMP/SeTswap > $T_PX/etc/fstab
+    fi
+    cat $TMP/SeTnative >> $T_PX/etc/fstab
+    if [ -r $TMP/SeTDOS ]; then
+     cat $TMP/SeTDOS >> $T_PX/etc/fstab
+    fi
+    printf "%-16s %-16s %-11s %-16s %-3s %s\n" "#/dev/cdrom" "/mnt/cdrom" "auto" "noauto,owner,ro,comment=x-gvfs-show" "0" "0" >> $T_PX/etc/fstab
+    printf "%-16s %-16s %-11s %-16s %-3s %s\n" "/dev/fd0" "/mnt/floppy" "auto" "noauto,owner" "0" "0" >> $T_PX/etc/fstab
+    printf "%-16s %-16s %-11s %-16s %-3s %s\n" "devpts" "/dev/pts" "devpts" "gid=5,mode=620" "0" "0" >> $T_PX/etc/fstab
+    printf "%-16s %-16s %-11s %-16s %-3s %s\n" "proc" "/proc" "proc" "defaults" "0" "0" >> $T_PX/etc/fstab
+    printf "%-16s %-16s %-11s %-16s %-3s %s\n" "tmpfs" "/dev/shm" "tmpfs" "defaults" "0" "0" >> $T_PX/etc/fstab
+   fi
+   dialog --title "SETUP COMPLETE" --msgbox "System configuration \
+and installation is complete. \
+\n\nYou may now reboot your system." 7 55
+  fi
+ fi
+
+ if [ "$MAINSELECT" = "EXIT" ]; then
+  break
+ fi
+
+done # end of main loop
+sync
+
+chmod 755 $T_PX
+if [ -d $T_PX/tmp ]; then
+ chmod 1777 $T_PX/tmp
+fi
+if mount | grep /var/log/mntiso 1> /dev/null 2> /dev/null ; then
+ umount -f /var/log/mntiso
+fi
+if mount | grep /var/log/mount 1> /dev/null 2> /dev/null ; then
+ umount /var/log/mount
+fi
+# Anything mounted on /var/log/mount now is a fatal error:
+if mount | grep /var/log/mount 1> /dev/null 2> /dev/null ; then
+  exit
+fi
+# If the mount table is corrupt, the above might not do it, so we will
+# try to detect Linux and FAT32 partitions that have slipped by:
+if [ -d /var/log/mount/lost+found -o -d /var/log/mount/recycled \
+     -o -r /var/log/mount/io.sys ]; then
+  exit
+fi
+rm -f /var/log/mount 2> /dev/null
+rmdir /var/log/mount 2> /dev/null
+mkdir /var/log/mount 2> /dev/null
+chmod 755 /var/log/mount
+
+# An fstab file is indicative of an OS installation, rather than
+# just loading the "setup" script and selecting "EXIT"
+if [ -f ${T_PX}/etc/fstab ]; then
+  # umount CD:
+  if [ -r $TMP/SeTCDdev ]; then
+    if mount | grep iso9660 > /dev/null 2> /dev/null ; then
+      umount `mount | grep iso9660 | cut -f 1 -d ' '`
+    fi
+    eject -s `cat $TMP/SeTCDdev`
+    # Tell the user to remove the disc, if one had previously been mounted
+    # (it should now be ejected):
+    dialog \
+     --clear \
+     --title "@CDISTRO@ Linux Setup is complete" "$@" \
+     --msgbox "\nPlease remove the installation disc.\n" 7 40
+  fi
+  # Offer to reboot or drop to shell:
+  dialog \
+     --title "@CDISTRO@ Linux Setup is complete" "$@" \
+     --yesno \
+     "\nWould you like to reboot your system?\n\n\n\
+If you choose \"No\", you will be dropped to a shell.\n" 11 50
+    retval=$?
+    if [ $retval = 1 ]; then
+      clear
+      echo
+      echo "You may now reboot your system once you are ready."
+      echo "You can issue the 'reboot' command; or if your system has"
+      echo "a keyboard attached, you can use the key combination: control+alt+delete"
+      echo
+    else
+      touch /reboot
+    fi
+fi
+
+# Fix the date:
+fixdate
+
+# final cleanup
+rm -f $TMP/tagfile $TMP/SeT* $TMP/tar-error $TMP/unsquash_output $TMP/unsquash_error $TMP/PKGTOOL_REMOVED
+rm -f /var/log/mount/treecache
+rmdir /var/log/mntiso 2>/dev/null
+rm -rf $TMP/treecache
+rm -rf $TMP/pkgcache
+rmdir ${T_PX}/tmp/orbit-root 2> /dev/null
+
+# If the OS had been installed and the user elected to reboot:
+if [ -f /reboot ]; then
+   clear
+   echo "** Starting reboot **"
+   sleep 1
+   reboot
+fi
+
+# end slackware setup script
-- 
cgit v1.2.3