summaryrefslogtreecommitdiffstats
path: root/iso2usb.sh
diff options
context:
space:
mode:
Diffstat (limited to 'iso2usb.sh')
-rw-r--r--iso2usb.sh125
1 files changed, 88 insertions, 37 deletions
diff --git a/iso2usb.sh b/iso2usb.sh
index d791c98..1ff997a 100644
--- a/iso2usb.sh
+++ b/iso2usb.sh
@@ -24,6 +24,12 @@
# Be careful:
set -e
+# Set to '1' if you want to ignore all warnings:
+FORCE=0
+
+# By default, we use 'persistence' as the name of the persistence directory:
+PERSISTENCE="persistence"
+
# Set to '1' if the script should not ask any questions:
UNATTENDED=0
@@ -39,6 +45,10 @@ EFIMNT=""
ISOMNT=""
USBMNT=""
+#
+# -- function definitions --
+#
+
# Clean up in case of failure:
cleanup() {
# Clean up by unmounting our loopmounts, deleting tempfiles:
@@ -65,9 +75,11 @@ cat <<EOT
# This data will be *erased* !
#
# $(basename $0) accepts the following parameters:
+# -f|--force Ignore most warnings (except the back-out)
# -h|--help This help
# -i|--infile <filename> Full path to the ISO image file
# -o|--outdev <filename> The device name of your USB drive
+# -p|--persistence <dirname> Custom name of the 'persistence' directory
# -u|--unattended Do not ask any questions
# -v|--verbose Show verbose messages
# -w|--wait<number> Pause boot <number> seconds to initialize USB
@@ -80,6 +92,42 @@ cat <<EOT
EOT
}
+# Add longer USB WAIT to the initrd:
+update_initrd() {
+ # USB boot medium needs a few seconds boot delay else the overlay will fail.
+
+ # Check if we need to update the wait-for-root file in the initrd:
+ OLDWAIT=$(gunzip -cd ${USBMNT}/boot/initrd.img |cpio -i --to-stdout wait-for-root 2>/dev/null)
+ [ "$OLDWAIT" = "$WAIT" ] && return
+
+ if [ -z "$IMGDIR" ]; then
+ # Create a temporary extraction directory for the initrd:
+ mkdir -p /mnt
+ IMGDIR=$(mktemp -d -p /mnt -t alienimg.XXXXXX)
+ if [ ! -d $IMGDIR ]; then
+ echo "*** Failed to create a temporary extraction directory for the initrd!"
+ exit 1
+ fi
+ fi
+ chmod 711 $IMGDIR
+
+ echo "--- Extracting Slackware initrd and adding rootdelay for USB..."
+ cd ${IMGDIR}
+ gunzip -cd ${USBMNT}/boot/initrd.img \
+ | cpio -i -d -H newc --no-absolute-filenames
+ echo "--- Updating 'waitforroot' time from '$OLDWAIT' to '$WAIT':"
+ echo ${WAIT} > wait-for-root
+ echo "--- Compressing the initrd image again:"
+ chmod 0755 ${IMGDIR}
+ find . |cpio -o -H newc |gzip > ${USBMNT}/boot/initrd.img
+ cd - 2>/dev/null
+ rm -rf $IMGDIR/*
+} # End of update_initrd()
+
+#
+# -- end of function definitions --
+#
+
# Parse the commandline parameters:
if [ -z "$1" ]; then
showhelp
@@ -87,6 +135,10 @@ if [ -z "$1" ]; then
fi
while [ ! -z "$1" ]; do
case $1 in
+ -f|--force)
+ FORCE=1
+ shift
+ ;;
-h|--help)
showhelp
exit
@@ -99,6 +151,10 @@ while [ ! -z "$1" ]; do
TARGET="$2"
shift 2
;;
+ -p|--persistence)
+ PERSISTENCE="$2"
+ shift 2
+ ;;
-u|--unattended)
UNATTENDED=1
shift
@@ -121,7 +177,7 @@ done
# Before we start:
[ -x /bin/id ] && CMD_ID="/bin/id" || CMD_ID="/usr/bin/id"
-if [ "$($CMD_ID -u)" != "0" ]; then
+if [ "$($CMD_ID -u)" != "0" -a $FORCE -eq 0 ]; then
echo "*** You need to be root to run $(basename $0)."
exit 1
fi
@@ -132,15 +188,15 @@ if [ -z "$TARGET" -o -z "$SLISO" ]; then
exit 1
fi
-if [ ! -f $SLISO ]; then
+if [ ! -f $SLISO -a $FORCE -eq 0 ]; then
echo "*** This is not a useable file: '$SLISO' !"
exit 1
fi
-if [ ! -b $TARGET ]; then
+if [ ! -b $TARGET -a $FORCE -eq 0 ]; then
echo "*** Not a block device: '$TARGET' !"
exit 1
-elif [ "$(echo ${TARGET%[0-9]})" != "$TARGET" ]; then
+elif [ "$(echo ${TARGET%[0-9]})" != "$TARGET" -a $FORCE -eq 0 ]; then
echo "*** You need to point to the USB device, not a partition ($TARGET)!"
exit 1
fi
@@ -169,7 +225,7 @@ cat <<EOT
#
# FDISK OUTPUT:
EOT
-/sbin/gdisk -l $TARGET 2>/dev/null | while read LINE ; do echo "# $LINE" ; done
+echo q |/sbin/gdisk -l $TARGET 2>/dev/null | while read LINE ; do echo "# $LINE" ; done
if [ $UNATTENDED -eq 0 ]; then
cat <<EOT
@@ -188,16 +244,17 @@ LIVELABEL=$(/sbin/blkid -s LABEL -o value ${SLISO})
# Use sgdisk to wipe and then setup the USB device:
# - 1 MB BIOS boot partition
-# - 200 MB EFI system partition
+# - 100 MB EFI system partition
# - Let Slackware have the rest
# - Make the Linux partition "legacy BIOS bootable"
+# Make sure that there is no MBR nor a partition table anymore:
+dd if=/dev/zero of=$TARGET bs=512 count=1 conv=notrunc
# The first sgdisk command is allowed to have non-zero exit code:
-/sbin/sgdisk -Z $TARGET || true
/sbin/sgdisk -og $TARGET || true
/sbin/sgdisk \
-n 1:2048:4095 -c 1:"BIOS Boot Partition" -t 1:ef02 \
- -n 2:4096:413695 -c 2:"EFI System Partition" -t 2:ef00 \
- -n 3:413696:0 -c 3:"Slackware Linux" -t 3:8300 \
+ -n 2:4096:208895 -c 2:"EFI System Partition" -t 2:ef00 \
+ -n 3:208896:0 -c 3:"Slackware Linux" -t 3:8300 \
$TARGET
/sbin/sgdisk -A 3:set:2 $TARGET
# Show what we did to the USB stick:
@@ -230,6 +287,7 @@ else
fi
# Find out if the ISO contains an EFI bootloader and use it:
+EFIBOOT=0
EFIOFFSET=$(/sbin/fdisk -lu ${SLISO} 2>/dev/null |grep EFI |tr -s ' ' | cut -d' ' -f 2)
if [ -n "$EFIOFFSET" ]; then
# Mount the EFI partition so we can retrieve the EFI bootloader:
@@ -237,6 +295,8 @@ if [ -n "$EFIOFFSET" ]; then
if [ ! -f ${EFIMNT}/EFI/BOOT/bootx64.efi ]; then
echo "-- Note: UEFI boot file 'bootx64.efi' not found on ISO."
echo "-- UEFI boot will not be supported"
+ else
+ EFIBOOT=1
fi
fi
@@ -250,22 +310,30 @@ else
chmod 711 $USBMNT
fi
-# Mount the EFI partition and copy the EFI boot image to it:
-/sbin/mount -t vfat -o shortname=mixed ${TARGET}2 ${USBMNT}
-mkdir -p ${USBMNT}/EFI/BOOT
-cp ${EFIMNT}/EFI/BOOT/bootx64.efi ${USBMNT}/EFI/BOOT
+# Loop-mount the ISO (or 1st partition if this is a hybrid ISO):
+/sbin/mount -o loop ${SLISO} ${ISOMNT}
+
+if [ $EFIBOOT -eq 1 ]; then
+ # Mount the EFI partition and copy /EFI as well as /boot directories into it:
+ /sbin/mount -t vfat -o shortname=mixed ${TARGET}2 ${USBMNT}
+ mkdir -p ${USBMNT}/EFI/BOOT
+ rsync -rlptD ${ISOMNT}/EFI/BOOT/* ${USBMNT}/EFI/BOOT/
+ mkdir -p ${USBMNT}/boot
+ rsync -rlptD ${ISOMNT}/boot/* ${USBMNT}/boot/
+ # Add more USB WAIT seconds to the initrd:
+ update_initrd ${USBMNT}/boot/initrd.img
+fi
+
+# No longer needed:
/sbin/umount ${USBMNT}
/sbin/umount ${EFIMNT}
# Mount the Linux partition:
/sbin/mount -t auto ${TARGET}3 ${USBMNT}
-# Loop-mount the ISO (or 1st partition if this is a hybrid ISO):
-/sbin/mount -o loop ${SLISO} ${ISOMNT}
-
# Copy the ISO content into the USB Linux partition:
echo "--- Copying files from ISO to USB... takes some time."
-rsync -a ${RVERBOSE} ${ISOMNT}/* ${USBMNT}/
+rsync -a ${RVERBOSE} --exclude=EFI ${ISOMNT}/* ${USBMNT}/
# Write down the version of the ISO image:
VERSION=$(iso-info ${SLISO} |grep Application |cut -d: -f2- 2>/dev/null)
@@ -273,28 +341,11 @@ if [ -n "$VERSION" ]; then
echo "$VERSION" > ${USBMNT}/.isoversion
fi
-# Create a temporary extraction directory for the initrd:
-mkdir -p /mnt
-IMGDIR=$(mktemp -d -p /mnt -t alienimg.XXXXXX)
-if [ ! -d $IMGDIR ]; then
- echo "*** Failed to create a temporary extraction directory for the initrd!"
- exit 1
-else
- chmod 711 $IMGDIR
-fi
-
-# USB boot medium needs a few seconds boot delay or else the overlay will fail:
-echo "--- Extracting Slackware initrd and adding rootdelay for USB..."
-cd ${IMGDIR}
-gunzip -cd ${USBMNT}/boot/initrd.img |cpio -i -d -H newc --no-absolute-filenames
-echo ${WAIT} > wait-for-root
-echo "--- Compressing the initrd image again:"
-chmod 0755 ${IMGDIR}
-find . |cpio -o -H newc |gzip > ${USBMNT}/boot/initrd.img
-cd - 2>/dev/null
+# Add more USB WAIT seconds to the initrd:
+update_initrd ${USBMNT}/boot/initrd.img
# Create persistence directory:
-mkdir -p ${USBMNT}/persistence
+mkdir -p ${USBMNT}/${PERSISTENCE}
# Use extlinux to make the USB device bootable:
echo "--- Making the USB drive '$TARGET' bootable using extlinux..."