diff options
Diffstat (limited to 'deps')
68 files changed, 1393 insertions, 1691 deletions
diff --git a/deps/LibRaw/LibRaw.SlackBuild b/deps/LibRaw/LibRaw.SlackBuild deleted file mode 100755 index 20ff70f..0000000 --- a/deps/LibRaw/LibRaw.SlackBuild +++ /dev/null @@ -1,121 +0,0 @@ -#!/bin/sh - -# Copyright 2013 Patrick J. Volkerding, Sebeka, MN, USA -# Copyright 2013 Eric Hameleers, Eindhoven, NL -# All rights reserved. - -# Redistribution and use of this script, with or without modification, is -# permitted provided that the following conditions are met: -# -# 1. Redistributions of this script must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED -# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO -# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, -# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; -# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR -# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF -# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -PKGNAM=LibRaw -VERSION=${VERSION:-0.16.0} -BUILD=${BUILD:-1} - -NUMJOBS=${NUMJOBS:--j7} - -# Automatically determine the architecture we're building on: -MARCH=$( uname -m ) -if [ -z "$ARCH" ]; then - case "$MARCH" in - i?86) export ARCH=i486 ;; - armv7hl) export ARCH=$MARCH ;; - arm*) export ARCH=arm ;; - # Unless $ARCH is already set, use uname -m for all other archs: - *) export ARCH=$MARCH ;; - esac -fi - -if [ "$ARCH" = "i486" ]; then - SLKCFLAGS="-O2 -march=i486 -mtune=i686" - LIBDIRSUFFIX="" -elif [ "$ARCH" = "s390" ]; then - SLKCFLAGS="-O2" - LIBDIRSUFFIX="" -elif [ "$ARCH" = "x86_64" ]; then - SLKCFLAGS="-O2 -fPIC" - LIBDIRSUFFIX="64" -elif [ "$ARCH" = "armv7hl" ]; then - SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16" - LIBDIRSUFFIX="" -else - SLKCFLAGS="-O2" - LIBDIRSUFFIX="" -fi - -case "$ARCH" in - arm*) TARGET=$ARCH-slackware-linux-gnueabi ;; - *) TARGET=$ARCH-slackware-linux ;; -esac - -CWD=$(pwd) -TMP=${TMP:-/tmp} -PKG=$TMP/package-$PKGNAM - -rm -rf $PKG -mkdir -p $TMP $PKG -cd $TMP -rm -rf $PKGNAM-$VERSION-build -mkdir $PKGNAM-$VERSION-build -cd $PKGNAM-$VERSION-build -tar xvf $CWD/$PKGNAM-$VERSION.tar.gz || exit 1 -tar xvf $CWD/$PKGNAM-demosaic-pack-GPL2-$VERSION.tar.gz || exit 1 -tar xvf $CWD/$PKGNAM-demosaic-pack-GPL3-$VERSION.tar.gz || exit 1 -cd $PKGNAM-$VERSION || exit 1 - -chown -R root:root . -find . \ - \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ - -exec chmod 755 {} \; -o \ - \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ - -exec chmod 644 {} \; - -CFLAGS="$SLKCFLAGS" \ -CXXFLAGS="$SLKCFLAGS" \ -./configure \ - --prefix=/usr \ - --libdir=/usr/lib${LIBDIRSUFFIX} \ - --sysconfdir=/etc \ - --localstatedir=/var \ - --mandir=/usr/man \ - --docdir=/usr/doc/$PKGNAM-$VERSION \ - --disable-static \ - --enable-demosaic-pack-gpl2=../LibRaw-demosaic-pack-GPL2-$VERSION \ - --enable-demosaic-pack-gpl3=../LibRaw-demosaic-pack-GPL3-$VERSION \ - --enable-jasper \ - --enable-lcms \ - --disable-examples \ - --build=$TARGET \ - || exit 1 - -make $NUMJOBS || make || exit 1 -make install DESTDIR=$PKG - -find $PKG | xargs file | grep -e "executable" -e "shared object" \ - | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - -mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION -cp -a \ - COPYRIGHT Changelog.txt LICENSE.* README* doc \ - $PKG/usr/doc/$PKGNAM-$VERSION - mv $PKG/usr/doc/$PKGNAM-$VERSION/doc $PKG/usr/doc/$PKGNAM-$VERSION/html - -mkdir -p $PKG/install -cat $CWD/slack-desc > $PKG/install/slack-desc - -cd $PKG -/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz - diff --git a/deps/LibRaw/slack-desc b/deps/LibRaw/slack-desc deleted file mode 100644 index b5c3b7b..0000000 --- a/deps/LibRaw/slack-desc +++ /dev/null @@ -1,19 +0,0 @@ -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. -# Line up the first '|' above the ':' following the base package name, and -# the '|' on the right side marks the last column you can put a character in. -# You must make exactly 11 lines for the formatting to be correct. It's also -# customary to leave one space after the ':' except on otherwise blank lines. - - |-----handy-ruler------------------------------------------------------| -LibRaw: LibRaw (library for decoding raw digital photos) -LibRaw: -LibRaw: LibRaw is a library for reading RAW files obtained from digital -LibRaw: cameras (CRW/CR2, NEF, RAF, DNG, and others). It is based on the -LibRaw: source code of the dcraw utility. -LibRaw: -LibRaw: -LibRaw: -LibRaw: -LibRaw: Homepage: http://www.libraw.org/ -LibRaw: diff --git a/deps/phonon-vlc/phonon-vlc.SlackBuild b/deps/OpenAL/OpenAL.SlackBuild index 69a0f05..138dc73 100755 --- a/deps/phonon-vlc/phonon-vlc.SlackBuild +++ b/deps/OpenAL/OpenAL.SlackBuild @@ -1,6 +1,5 @@ #!/bin/sh -# Copyright 2011, 2012, 2014 Eric Hameleers, Eindhoven, NL -# Copyright 2011, 2012 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2012, 2013, 2014 Eric Hameleers, Eindhoven, NL # All rights reserved. # # Permission to use, copy, modify, and distribute this software for @@ -23,53 +22,56 @@ # ----------------------------------------------------------------------------- -PKGNAM=phonon-vlc -SRCNAM=phonon-backend-vlc -VERSION=${VERSION:-$(echo $SRCNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d- | rev)} +PKGNAM=OpenAL +SRCNAM=openal-soft +VERSION=${VERSION:-1.15.1} BUILD=${BUILD:-1} - -NUMJOBS=${NUMJOBS:" -j7 "} - -# Automatically determine the architecture we're building on: -MARCH=$( uname -m ) -if [ -z "$ARCH" ]; then - case "$MARCH" in - i?86) export ARCH=i486 ;; - armv7hl) export ARCH=$MARCH ;; - arm*) export ARCH=arm ;; - # Unless $ARCH is already set, use uname -m for all other archs: - *) export ARCH=$MARCH ;; - esac -fi - -if [ "$ARCH" = "i486" ]; then - SLKCFLAGS="-O2 -march=i486 -mtune=i686" - LIBDIRSUFFIX="" -elif [ "$ARCH" = "s390" ]; then - SLKCFLAGS="-O2" - LIBDIRSUFFIX="" -elif [ "$ARCH" = "x86_64" ]; then - SLKCFLAGS="-O2 -fPIC" - LIBDIRSUFFIX="64" -elif [ "$ARCH" = "armv7hl" ]; then - SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16" - LIBDIRSUFFIX="" -else - SLKCFLAGS="-O2" - LIBDIRSUFFIX="" -fi +NUMJOBS=${NUMJOBS:" -j4 "} CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-$PKGNAM +if [ -e $CWD/machine.conf ]; then + . $CWD/machine.conf ] +elif [ -e /etc/slackbuild/machine.conf ]; then + . /etc/slackbuild/machine.conf ] +else + # Automatically determine the architecture we're building on: + MARCH=$( uname -m ) + if [ -z "$ARCH" ]; then + case "$MARCH" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$MARCH ;; + esac + fi + # Set CFLAGS/CXXFLAGS and LIBDIRSUFFIX: + if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" + elif [ "$ARCH" = "s390" ]; then + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" + elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" + elif [ "$ARCH" = "arm" ]; then + SLKCFLAGS="-O2 -march=armv5te" + LIBDIRSUFFIX="" + else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" + fi +fi + rm -rf $PKG mkdir -p $TMP $PKG cd $TMP rm -rf $SRCNAM-$VERSION tar xvf $CWD/$SRCNAM-$VERSION.tar.?z* || exit 1 cd $SRCNAM-$VERSION || exit 1 - chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -77,57 +79,29 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; -echo Building ... mkdir -p build cd build cmake \ -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ - -DCMAKE_C_FLAGS_RELEASE:STRING="$SLKCFLAGS" \ -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ - -DCMAKE_CXX_FLAGS_RELEASE:STRING="$SLKCFLAGS" \ - -DCMAKE_BUILD_TYPE=Release \ -DCMAKE_INSTALL_PREFIX=/usr \ -DMAN_INSTALL_DIR=/usr/man \ -DSYSCONF_INSTALL_DIR=/etc \ -DLIB_SUFFIX=${LIBDIRSUFFIX} \ .. - make $NUMJOBS - make DESTDIR=$PKG install + make $NUMJOBS || make || exit 1 + make install DESTDIR=$PKG || exit 1 cd - -# Conditional build of Qt5 support: -if qtpaths-qt5 --qt-version 1>/dev/null 2>/dev/null ; then - mkdir -p build-qt5 - cd build-qt5 - cmake \ - -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ - -DCMAKE_C_FLAGS_RELEASE:STRING="$SLKCFLAGS" \ - -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ - -DCMAKE_CXX_FLAGS_RELEASE:STRING="$SLKCFLAGS" \ - -DCMAKE_BUILD_TYPE=Release \ - -DCMAKE_INSTALL_PREFIX=/usr \ - -DMAN_INSTALL_DIR=/usr/man \ - -DSYSCONF_INSTALL_DIR=/etc \ - -DLIB_SUFFIX=${LIBDIRSUFFIX} \ - -DPHONON_BUILD_PHONON4QT5=ON \ - .. - make $NUMJOBS - make DESTDIR=$PKG install - cd - -fi +# Add an example configuration file: +mkdir -p $PKG/etc/openal +install -m0644 alsoftrc.sample $PKG/etc/openal/alsoft.conf.sample # Add documentation: mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION -cp -a \ - AUTHORS COPYING* \ - $PKG/usr/doc/$PKGNAM-$VERSION - -# Compress the man page(s): -if [ -d $PKG/usr/man ]; then - find $PKG/usr/man -type f -name "*.?" -exec gzip -9f {} \; - for i in $(find $PKG/usr/man -type l -name "*.?") ; do ln -s $( readlink $i ). -gz $i.gz ; rm $i ; done -fi +cp -a COPYING $PKG/usr/doc/$PKGNAM-$VERSION || true +chown -R root:root $PKG/usr/doc/$PKGNAM-$VERSION +find $PKG/usr/doc -type f -exec chmod 644 {} \; # Strip binaries (if any): find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ @@ -139,5 +113,6 @@ cat $CWD/slack-desc > $PKG/install/slack-desc # Build the package: cd $PKG -/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg --linkadd y --chown n $TMP/${PKGNAM}-${VERSION}-${ARCH}-${BUILD}.txz + diff --git a/deps/OpenAL/slack-desc b/deps/OpenAL/slack-desc new file mode 100644 index 0000000..6a85bc0 --- /dev/null +++ b/deps/OpenAL/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler------------------------------------------------------| +OpenAL: OpenAL (implementation of the OpenAL 3D audio API) +OpenAL: +OpenAL: OpenAL Soft is an LGPL-licensed, cross-platform, implementation +OpenAL: of the OpenAL 3D audio API. OpenAL provides capabilities for +OpenAL: playing audio in a virtual 3D environment. It also facilitates +OpenAL: streaming audio, multi-channel buffers, and audio capture. +OpenAL: +OpenAL: +OpenAL: OpenAL by Creative Labs: http://www.OpenAL.org/ +OpenAL: OpenAL Soft home: http://kcat.strangesoft.net/openal.html +OpenAL: diff --git a/deps/akonadi-qt5/akonadi-qt5-coinstallable-libs.patch.gz b/deps/akonadi-qt5/akonadi-qt5-coinstallable-libs.patch.gz Binary files differnew file mode 100644 index 0000000..3fe4565 --- /dev/null +++ b/deps/akonadi-qt5/akonadi-qt5-coinstallable-libs.patch.gz diff --git a/deps/akonadi/akonadi.SlackBuild b/deps/akonadi-qt5/akonadi-qt5.SlackBuild index fe36ea4..d3233ba 100755 --- a/deps/akonadi/akonadi.SlackBuild +++ b/deps/akonadi-qt5/akonadi-qt5.SlackBuild @@ -24,8 +24,9 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -PKGNAM=akonadi -VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +PKGNAM=akonadi-qt5 +SRCNAM=akonadi +VERSION=${VERSION:-$(echo $SRCNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:--j7} @@ -66,9 +67,13 @@ PKG=$TMP/package-$PKGNAM rm -rf $PKG mkdir -p $TMP $PKG cd $TMP -rm -rf $PKGNAM-$VERSION -tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1 -cd $PKGNAM-$VERSION || exit 1 +rm -rf $SRCNAM-$VERSION +tar xvf $CWD/$SRCNAM-$VERSION.tar.?z* || exit 1 +cd $SRCNAM-$VERSION || exit 1 + +# Allow akonadi-qt5 libraries to co-exist with akonadi: +zcat $CWD/akonadi-qt5-coinstallable-libs.patch.gz | patch -p1 --verbose || exit 1 + chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -86,10 +91,12 @@ cd build -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ -DLIB_SUFFIX=${LIBDIRSUFFIX} \ -DCMAKE_INSTALL_PREFIX=/usr \ - -DMAN_INSTALL_DIR=/usr/man \ - -DMAN_INSTALL_DIR=/usr/man \ + -DMAN_INSTALL_DIR=man \ + -DQT_PLUGINS_DIR=lib$LIBDIRSUFFIX/qt5/plugins \ + -DQT5_BUILD=ON \ -DINSTALL_QSQLITE_IN_QT_PREFIX:BOOL=ON \ - -DQT_PLUGINS_DIR=/usr/lib$LIBDIRSUFFIX/qt/plugins \ + -DWITH_SOPRANO=OFF \ + -DAKONADI_BUILD_TESTS=OFF \ .. make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG || exit 1 diff --git a/deps/akonadi/doinst.sh.gz b/deps/akonadi-qt5/doinst.sh.gz Binary files differindex bedb7a0..bedb7a0 100644 --- a/deps/akonadi/doinst.sh.gz +++ b/deps/akonadi-qt5/doinst.sh.gz diff --git a/deps/akonadi-qt5/slack-desc b/deps/akonadi-qt5/slack-desc new file mode 100644 index 0000000..ade9732 --- /dev/null +++ b/deps/akonadi-qt5/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler-----------------------------------------------------| +akonadi-qt5: akonadi-qt5 (PIM storage service) +akonadi-qt5: +akonadi-qt5: akonadi is an extensible cross-desktop storage service for PIM data +akonadi-qt5: and meta data providing concurrent read, write, and query access. +akonadi-qt5: It will provide a unique desktop wide object identification and +akonadi-qt5: retrieval. +akonadi-qt5: This package contains Qt5 bindings. +akonadi-qt5: +akonadi-qt5: Homepage: http://www.kdepim.org/akonadi/ +akonadi-qt5: +akonadi-qt5: diff --git a/deps/akonadi/slack-desc b/deps/akonadi/slack-desc deleted file mode 100644 index d0c26bb..0000000 --- a/deps/akonadi/slack-desc +++ /dev/null @@ -1,19 +0,0 @@ -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' -# on the right side marks the last column you can put a character in. You must -# make exactly 11 lines for the formatting to be correct. It's also -# customary to leave one space after the ':'. - - |-----handy-ruler-----------------------------------------------------| -akonadi: akonadi (PIM storage service) -akonadi: -akonadi: akonadi is an extensible cross-desktop storage service for PIM data -akonadi: and meta data providing concurrent read, write, and query access. -akonadi: It will provide a unique desktop wide object identification and -akonadi: retrieval. -akonadi: -akonadi: Homepage: http://www.kdepim.org/akonadi/ -akonadi: -akonadi: -akonadi: diff --git a/deps/alldeps.SlackBuild b/deps/alldeps.SlackBuild index ad8ee10..8663d9f 100755 --- a/deps/alldeps.SlackBuild +++ b/deps/alldeps.SlackBuild @@ -16,25 +16,23 @@ QTDIR=/usr/lib${LIBDIRSUFFIX}/qt ; export QTDIR ALLDEPS=" \ soprano \ akonadi \ - attica \ shared-desktop-ontologies \ - virtuoso-ose \ - qt \ - qjson \ - sip \ - PyQt \ - phonon-gstreamer \ LibRaw \ eigen3 \ - orc \ - gstreamer1 \ - gst1-plugins-base \ - gst1-plugins-good \ - qt-gstreamer1 \ xapian-core \ - libfakekey \ + OpenAL \ + harfbuzz \ + qt5 \ + phonon \ + phonon-gstreamer \ + qt-gstreamer \ + strigi \ + libssh \ + akonadi-qt5 \ + libdbusmenu-qt5 \ + polkit-qt5-1 \ + poppler \ " - #qt-gstreamer \ # Allow for specification of individual packages to be built: if [ -z "$1" ]; then diff --git a/deps/attica/slack-desc b/deps/attica/slack-desc deleted file mode 100644 index 18aedb8..0000000 --- a/deps/attica/slack-desc +++ /dev/null @@ -1,19 +0,0 @@ -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' -# on the right side marks the last column you can put a character in. You must -# make exactly 11 lines for the formatting to be correct. It's also -# customary to leave one space after the ':'. - - |-----handy-ruler-------------------------------------------------------| -attica: attica (Qt Collaboration library) -attica: -attica: Attica is a Qt library that implements the freedesktop.org -attica: specification for the Open Collaboration Services API version 1.4. -attica: It grants easy access to the services such as querying information -attica: about persons and contents. -attica: -attica: Homepage: http://www.kde.org -attica: -attica: -attica: diff --git a/deps/gst1-plugins-good/gst1-plugins-good.SlackBuild b/deps/cmake/cmake.SlackBuild index ef4d518..6150598 100755 --- a/deps/gst1-plugins-good/gst1-plugins-good.SlackBuild +++ b/deps/cmake/cmake.SlackBuild @@ -1,7 +1,6 @@ #!/bin/sh -# Copyright 2014 Eric Hameleers, Eindhoven, NL -# Copyright 2014 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2008, 2009, 2010, 2011, 2013 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -10,7 +9,7 @@ # 1. Redistributions of this script must retain the above copyright # notice, this list of conditions and the following disclaimer. # -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED # WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF # MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO # EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, @@ -21,49 +20,32 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -PKGNAM=gst1-plugins-good -SRCNAM=gst-plugins-good -VERSION=${VERSION:-1.4.4} +PKGNAM=cmake +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} # Automatically determine the architecture we're building on: if [ -z "$ARCH" ]; then - case "$(uname -m)" in - i?86) ARCH=i486 ;; - arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7lh ;; + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; # Unless $ARCH is already set, use uname -m for all other archs: - *) ARCH=$(uname -m) ;; + *) export ARCH=$( uname -m ) ;; esac - export ARCH fi +NUMJOBS=${NUMJOBS:-" -j7 "} + if [ "$ARCH" = "i486" ]; then - SLKCFLAGS="-O2 -march=i486 -mtune=i686" - SLKLDFLAGS="" - LIBDIRSUFFIX="" + SLKCFLAGS="-O2 -m32 -march=i486 -mtune=i686" elif [ "$ARCH" = "s390" ]; then SLKCFLAGS="-O2" - SLKLDFLAGS="" - LIBDIRSUFFIX="" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" - SLKLDFLAGS="-L/usr/lib64" - LIBDIRSUFFIX="64" -elif [ "$ARCH" = "armv7hl" ]; then - SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16" - SLKLDFLAGS="" - LIBDIRSUFFIX="" else SLKCFLAGS="-O2" - SLKLDFLAGS="" - LIBDIRSUFFIX="" fi -case "$ARCH" in - arm*) TARGET=$ARCH-slackware-linux-gnueabi ;; - *) TARGET=$ARCH-slackware-linux ;; -esac - CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-$PKGNAM @@ -72,11 +54,10 @@ rm -rf $PKG mkdir -p $TMP $PKG cd $TMP -rm -rf $SRCNAM-$VERSION -tar xvf $CWD/$SRCNAM-$VERSION.tar.xz || exit 1 -cd $SRCNAM-$VERSION || exit 1 +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1 +cd $PKGNAM-$VERSION -# Make sure ownerships and permissions are sane: chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -84,26 +65,38 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; -# Configure: +mkdir cmake-build +cd cmake-build +../bootstrap \ + --prefix=/usr \ + --docdir=/doc/$PKGNAM-$VERSION \ + --qt-gui \ + --system-libs + +# Build CFLAGS="$SLKCFLAGS" \ CXXFLAGS="$SLKCFLAGS" \ -LDFLAGS="$SLKLDFLAGS" \ -./configure \ + ../configure \ --prefix=/usr \ - --libdir=/usr/lib${LIBDIRSUFFIX} \ - --sysconfdir=/etc \ - --localstatedir=/var \ - --mandir=/usr/man \ - --docdir=/usr/doc/$PKGNAM-$VERSION \ - --build=$TARGET - -# Build and install: -make || exit 1 + --docdir=/doc/$PKGNAM-$VERSION \ + --qt-gui \ + --system-libs \ + --build=$ARCH-slackware-linux + +make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG || exit 1 -# Strip binaries: -find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | \ - grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ../ChangeLog.txt ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ../ChangeLog.txt | head -n 1000 > $DOCSDIR/ChangeLog.txt + touch -r ../ChangeLog.txt $DOCSDIR/ChangeLog.txt +fi + +# How many redundant docs do we need? +# If you really require the docbook, it is in the source. +rm -f $PKG/usr/doc/$PKGNAM-$VERSION/*.docbook # Compress and link manpages, if any: if [ -d $PKG/usr/man ]; then @@ -120,17 +113,12 @@ if [ -d $PKG/usr/man ]; then ) fi -# Add documentation: -mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION -cp -a \ - AUTHORS COPYING* ChangeLog INSTALL NEWS RE* \ - $PKG/usr/doc/$PKGNAM-$VERSION +find $PKG | xargs file | grep -e "executable" -e "shared object" \ + | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -# Add a description: mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc -# Create the package: cd $PKG /sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/deps/cmake/slack-desc b/deps/cmake/slack-desc new file mode 100644 index 0000000..8fb5c8d --- /dev/null +++ b/deps/cmake/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' on +# the right side marks the last column you can put a character in. You must make +# exactly 11 lines for the formatting to be correct. It's also customary to +# leave one space after the ':'. + + |-----handy-ruler------------------------------------------------------| +cmake: CMake (cross-platform, open-source make system) +cmake: +cmake: CMake is used to control the software process using simple platform +cmake: and compiler independent configuration files. CMake generates +cmake: native makefiles and workspaces that can be used in the +cmake: compiler environment of your choice. +cmake: +cmake: CMake's home on the web is: http://www.cmake.org +cmake: +cmake: +cmake: diff --git a/deps/eigen3/eigen3.SlackBuild b/deps/eigen3/eigen3.SlackBuild deleted file mode 100755 index 1a890b8..0000000 --- a/deps/eigen3/eigen3.SlackBuild +++ /dev/null @@ -1,100 +0,0 @@ -#!/bin/sh - -# Copyright 2014 Patrick J. Volkerding, Sebeka, MN, USA -# Copyright 2014 Eric Hameleers, Eindhoven, NL -# All rights reserved. - -# Redistribution and use of this script, with or without modification, is -# permitted provided that the following conditions are met: -# -# 1. Redistributions of this script must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED -# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO -# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, -# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; -# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR -# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF -# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -PKGNAM=eigen3 -VERSION=3.1.2 -SRCVER="eigen-5097c01bcdc4" -BUILD=${BUILD:-1} - -# Automatically determine the architecture we're building on: -MARCH=$( uname -m ) -if [ -z "$ARCH" ]; then - case "$MARCH" in - i?86) export ARCH=i486 ;; - armv7hl) export ARCH=$MARCH ;; - arm*) export ARCH=arm ;; - # Unless $ARCH is already set, use uname -m for all other archs: - *) export ARCH=$MARCH ;; - esac -fi - -if [ "$ARCH" = "i486" ]; then - SLKCFLAGS="-O2 -march=i486 -mtune=i686" - LIBDIRSUFFIX="" -elif [ "$ARCH" = "i686" ]; then - SLKCFLAGS="-O2 -march=i686 -mtune=i686" - LIBDIRSUFFIX="" -elif [ "$ARCH" = "x86_64" ]; then - SLKCFLAGS="-O2 -fPIC" - LIBDIRSUFFIX="64" -elif [ "$ARCH" = "armv7hl" ]; then - SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16" - LIBDIRSUFFIX="" -else - SLKCFLAGS="-O2" - LIBDIRSUFFIX="" -fi - -CWD=$(pwd) -TMP=${TMP:-/tmp} -PKG=$TMP/package-$PKGNAM - -rm -rf $PKG -mkdir -p $PKG $TMP -cd $TMP -rm -rf eigen-$SRCVER -tar xvf $CWD/eigen-$VERSION.tar.bz2 -cd eigen-$SRCVER -chown -R root:root . -find -L . \ - \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 -o -perm 511 \) \ - -exec chmod 755 {} \; -o \ - \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ - -exec chmod 644 {} \; - -mkdir -p build -cd build - QTDIR=/usr/lib${LIBDIRSUFFIX}/qt \ - PATH=$QTDIR/bin:$PATH \ - cmake \ - -DCMAKE_BUILD_TYPE=Release \ - -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ - -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ - -DCMAKE_INSTALL_PREFIX=/usr \ - .. - make - make install DESTDIR=$PKG -cd .. - -find $PKG | xargs file | grep -e "executable" -e "shared object" \ - | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true - -mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION -cp -a COPYING* $PKG/usr/doc/$PKGNAM-$VERSION - -mkdir -p $PKG/install -cat $CWD/slack-desc > $PKG/install/slack-desc - -cd $PKG -/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz - diff --git a/deps/gst1-plugins-base/slack-desc b/deps/gst1-plugins-base/slack-desc deleted file mode 100644 index 94a1382..0000000 --- a/deps/gst1-plugins-base/slack-desc +++ /dev/null @@ -1,19 +0,0 @@ -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. -# Line up the first '|' above the ':' following the base package name, and -# the '|' on the right side marks the last column you can put a character in. -# You must make exactly 11 lines for the formatting to be correct. It's also -# customary to leave one space after the ':' except on otherwise blank lines. - - |-----handy-ruler------------------------------------------------------| -gst1-plugins-base: gst1-plugins-base (base set of GStreamer1 plugins) -gst1-plugins-base: -gst1-plugins-base: GStreamer Base Plug-ins is a well-groomed and well-maintained -gst1-plugins-base: collection of GStreamer plug-ins and elements, spanning the -gst1-plugins-base: range of possible types of elements one would want to write -gst1-plugins-base: for GStreamer. It also contains helper libraries and base -gst1-plugins-base: classes useful for writing elements. A wide range of video -gst1-plugins-base: and audio decoders, encoders, and filters are included. -gst1-plugins-base: -gst1-plugins-base: Homepage: http://gstreamer.freedesktop.org/ -gst1-plugins-base: diff --git a/deps/gst1-plugins-good/slack-desc b/deps/gst1-plugins-good/slack-desc deleted file mode 100644 index a4d55f0..0000000 --- a/deps/gst1-plugins-good/slack-desc +++ /dev/null @@ -1,19 +0,0 @@ -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. -# Line up the first '|' above the ':' following the base package name, and -# the '|' on the right side marks the last column you can put a character in. -# You must make exactly 11 lines for the formatting to be correct. It's also -# customary to leave one space after the ':' except on otherwise blank lines. - - |-----handy-ruler------------------------------------------------------| -gst1-plugins-good: gst1-plugins-good (good set of GStreamer 1.x plugins) -gst1-plugins-good: -gst1-plugins-good: GStreamer Good Plug-ins is a set of plug-ins that have good -gst1-plugins-good: quality code, correct functionality, and a good license -gst1-plugins-good: (LGPL for the plug-in code, LGPL or LGPL-compatible for the -gst1-plugins-good: supporting library). -gst1-plugins-good: -gst1-plugins-good: -gst1-plugins-good: -gst1-plugins-good: Homepage: http://gstreamer.freedesktop.org/ -gst1-plugins-good: diff --git a/deps/gstreamer1/gstreamer1.SlackBuild b/deps/gstreamer1/gstreamer1.SlackBuild deleted file mode 100755 index 738d92f..0000000 --- a/deps/gstreamer1/gstreamer1.SlackBuild +++ /dev/null @@ -1,125 +0,0 @@ -#!/bin/sh - -# Copyright 2014 Eric Hameleers, Eindhoven, NL -# Copyright 2014 Patrick J. Volkerding, Sebeka, Minnesota, USA -# All rights reserved. -# -# Redistribution and use of this script, with or without modification, is -# permitted provided that the following conditions are met: -# -# 1. Redistributions of this script must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED -# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO -# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, -# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; -# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR -# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF -# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -# ----------------------------------------------------------------------------- - -PKGNAM=gstreamer1 -VERSION=${VERSION:-1.4.4} -BUILD=${BUILD:-1} -SRCNAM=gstreamer - -# Automatically determine the architecture we're building on: -MARCH=$( uname -m ) -if [ -z "$ARCH" ]; then - case "$MARCH" in - i?86) export ARCH=i486 ;; - armv7hl) export ARCH=$MARCH ;; - arm*) export ARCH=arm ;; - # Unless $ARCH is already set, use uname -m for all other archs: - *) export ARCH=$MARCH ;; - esac -fi - -if [ "$ARCH" = "i486" ]; then - SLKCFLAGS="-O2 -march=i486 -mtune=i686" - LIBDIRSUFFIX="" -elif [ "$ARCH" = "s390" ]; then - SLKCFLAGS="-O2" - SLKLDFLAGS="" - LIBDIRSUFFIX="" -elif [ "$ARCH" = "x86_64" ]; then - SLKCFLAGS="-O2 -fPIC" - SLKLDFLAGS="-L/usr/lib64" - LIBDIRSUFFIX="64" -elif [ "$ARCH" = "armv7hl" ]; then - SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16" - SLKLDFLAGS="" - LIBDIRSUFFIX="" -else - SLKCFLAGS="-O2" - SLKLDFLAGS="" - LIBDIRSUFFIX="" -fi - -case "$ARCH" in - arm*) TARGET=$ARCH-slackware-linux-gnueabi ;; - *) TARGET=$ARCH-slackware-linux ;; -esac - -CWD=$(pwd) -TMP=${TMP:-/tmp} -PKG=$TMP/package-$PKGNAM - -rm -rf $PKG -mkdir -p $TMP $PKG -cd $TMP -rm -rf $SRCNAM-$VERSION -tar xvf $CWD/$SRCNAM-$VERSION.tar.xz || exit 1 -cd $SRCNAM-$VERSION || exit 1 - -# Make sure ownerships and permissions are sane: -chown -R root:root . -find . \ - \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ - -exec chmod 755 {} \; -o \ - \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ - -exec chmod 644 {} \; - -# Configure: -CFLAGS="$SLKCFLAGS" \ -CXXFLAGS="$SLKCFLAGS" \ -LDFLAGS="$SLKLDFLAGS" \ -./configure \ - --prefix=/usr \ - --libdir=/usr/lib${LIBDIRSUFFIX} \ - --sysconfdir=/etc \ - --localstatedir=/var \ - --mandir=/usr/man \ - --docdir=/usr/doc/$PKGNAM-$VERSION \ - --build=$TARGET - -# Build and install: -make || exit 1 -make install DESTDIR=$PKG - -# Strip binaries: -find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | \ - grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true - -# Compress and link manpages, if any: -find $PKG/usr/man -type f -exec gzip -9 {} \; -for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done - -# Add a documentation directory: -mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION -cp -a AUTHORS COPYING INSTALL MAINTAINERS NEWS README RELEASE TODO \ - $PKG/usr/doc/$PKGNAM-$VERSION -cat $CWD/$PKGNAM.SlackBuild > $PKG/usr/doc/$PKGNAM-$VERSION/$PKGNAM.SlackBuild - -# Add a package description and the post-install script if it exists: -mkdir -p $PKG/install -cat $CWD/slack-desc > $PKG/install/slack-desc - -# Build package: -cd $PKG -/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz - diff --git a/deps/gstreamer1/slack-desc b/deps/gstreamer1/slack-desc deleted file mode 100644 index 443efb9..0000000 --- a/deps/gstreamer1/slack-desc +++ /dev/null @@ -1,19 +0,0 @@ -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. -# Line up the first '|' above the ':' following the base package name, and -# the '|' on the right side marks the last column you can put a character in. -# You must make exactly 11 lines for the formatting to be correct. It's also -# customary to leave one space after the ':' except on otherwise blank lines. - - |-----handy-ruler------------------------------------------------------| -gstreamer1: GStreamer v1.x (streaming multimedia framework) -gstreamer1: -gstreamer1: GStreamer is a LGPL library that allows the construction of graphs -gstreamer1: of media-handling components. -gstreamer1: Applications can take advantage of advances in codec and filter -gstreamer1: technology transparently. -gstreamer1: -gstreamer1: -gstreamer1: -gstreamer1: Homepage: http://gstreamer.freedesktop.org/ -gstreamer1: diff --git a/deps/orc/orc.SlackBuild b/deps/harfbuzz/harfbuzz.SlackBuild index e5aa440..d6bcc22 100755 --- a/deps/orc/orc.SlackBuild +++ b/deps/harfbuzz/harfbuzz.SlackBuild @@ -1,7 +1,6 @@ #!/bin/sh -# Copyright 2014 Eric Hameleers, Eindhoven, NL -# Copyright 2014 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2013, 2014 Patrick J. Volkerding, Sebeka, Minnesota, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -10,7 +9,7 @@ # 1. Redistributions of this script must retain the above copyright # notice, this list of conditions and the following disclaimer. # -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED # WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF # MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO # EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, @@ -21,17 +20,10 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -PKGNAM=orc -VERSION=${VERSION:-0.4.22} +PKGNAM=harfbuzz +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} -NUMJOBS=${NUMJOBS:-" -j7 "} - -CWD=$(pwd) -TMP=${TMP:-/tmp} -PKG=$TMP/package-$PKGNAM - # Automatically determine the architecture we're building on: if [ -z "$ARCH" ]; then case "$(uname -m)" in @@ -43,25 +35,23 @@ if [ -z "$ARCH" ]; then export ARCH fi +NUMJOBS=${NUMJOBS:-" -j7 "} + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-$PKGNAM + if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" - SLKLDFLAGS="" LIBDIRSUFFIX="" elif [ "$ARCH" = "i686" ]; then SLKCFLAGS="-O2 -march=i686 -mtune=i686" - SLKLDFLAGS="" LIBDIRSUFFIX="" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" - SLKLDFLAGS="-L/usr/lib64" LIBDIRSUFFIX="64" -elif [ "$ARCH" = "armv7hl" ]; then - SLKCFLAGS="-O3 -march=armv7-a -mfpu=vfpv3-d16" - SLKLDFLAGS="" - LIBDIRSUFFIX="" else SLKCFLAGS="-O2" - SLKLDFLAGS="" LIBDIRSUFFIX="" fi @@ -77,18 +67,19 @@ rm -rf $PKGNAM-$VERSION tar xvf $CWD/$PKGNAM-$VERSION.tar.xz || exit 1 cd $PKGNAM-$VERSION || exit 1 -# Make sure ownerships and permissions are sane: +# Apply a patch (borrowed from debian) which 'unbreaks' the ABI breakage +# caused by moving the ICU functionality into a separate backend library. +zcat $CWD/harfbuzz_unbreak_abi.patch.gz | patch -p1 --verbose || exit 1 + chown -R root:root . find . \ - \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ - -exec chmod 755 {} \; -o \ - \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ - -exec chmod 644 {} \; + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; -# Configure: CFLAGS="$SLKCFLAGS" \ CXXFLAGS="$SLKCFLAGS" \ -LDFLAGS="$SLKLDFLAGS" \ ./configure \ --prefix=/usr \ --libdir=/usr/lib${LIBDIRSUFFIX} \ @@ -96,43 +87,29 @@ LDFLAGS="$SLKLDFLAGS" \ --localstatedir=/var \ --mandir=/usr/man \ --docdir=/usr/doc/$PKGNAM-$VERSION \ - --disable-static \ - --build=$TARGET + --build=$TARGET || exit 1 -# Build and install: -make || exit 1 +make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG || exit 1 -# Strip binaries: -find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | \ - grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true - -# Compress and link manpages, if any: -if [ -d $PKG/usr/man ]; then - ( cd $PKG/usr/man - for manpagedir in $(find . -type d -name "man*") ; do - ( cd $manpagedir - for eachpage in $( find . -type l -maxdepth 1) ; do - ln -s $( readlink $eachpage ).gz $eachpage.gz - rm $eachpage - done - gzip -9 *.? - ) - done - ) -fi +find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \ + | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true -# Add documentation: mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION cp -a \ - COPYING README TODO \ + AUTHORS COPYING INSTALL NEWS README THANKS TODO \ $PKG/usr/doc/$PKGNAM-$VERSION -# Add a description: +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc -# Create the package: cd $PKG -/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD$TAG.txz - +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/deps/harfbuzz/harfbuzz_unbreak_abi.patch.gz b/deps/harfbuzz/harfbuzz_unbreak_abi.patch.gz Binary files differnew file mode 100644 index 0000000..029aaae --- /dev/null +++ b/deps/harfbuzz/harfbuzz_unbreak_abi.patch.gz diff --git a/deps/harfbuzz/slack-desc b/deps/harfbuzz/slack-desc new file mode 100644 index 0000000..e349154 --- /dev/null +++ b/deps/harfbuzz/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':' except on otherwise blank lines. + + |-----handy-ruler------------------------------------------------------| +harfbuzz: harfbuzz (OpenType text shaping engine) +harfbuzz: +harfbuzz: HarfBuzz is an OpenType text shaping engine. +harfbuzz: +harfbuzz: http://www.freedesktop.org/wiki/Software/HarfBuzz +harfbuzz: +harfbuzz: +harfbuzz: +harfbuzz: +harfbuzz: +harfbuzz: diff --git a/deps/attica/attica.SlackBuild b/deps/libdbusmenu-qt5/libdbusmenu-qt5.SlackBuild index 9b98685..57768a6 100755 --- a/deps/attica/attica.SlackBuild +++ b/deps/libdbusmenu-qt5/libdbusmenu-qt5.SlackBuild @@ -1,9 +1,9 @@ #!/bin/sh -# Copyright 2009, 2010, 2011 Eric Hameleers, Eindhoven, NL -# Copyright 2009, 2010, 2011 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2010, 2011, 2012, 2014 Eric Hameleers, Eindhoven, The Netherlands +# Copyright 2010, 2011, 2012 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. -# + # Redistribution and use of this script, with or without modification, is # permitted provided that the following conditions are met: # @@ -22,7 +22,14 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -PKGNAM=attica +# This project has moved to https://launchpad.net/libdbusmenu-qt +# Get the latest code with: +# bzr branch lp:libdbusmenu-qt +# +# Get version number from +# grep dbusmenu_qt_VERSION dbusmenu-qt/CMakeLists.txt + +PKGNAM=libdbusmenu-qt5 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} @@ -49,9 +56,6 @@ elif [ "$ARCH" = "s390" ]; then elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" -elif [ "$ARCH" = "armv7hl" ]; then - SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16" - LIBDIRSUFFIX="" else SLKCFLAGS="-O2" LIBDIRSUFFIX="" @@ -67,6 +71,7 @@ cd $TMP rm -rf $PKGNAM-$VERSION tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1 cd $PKGNAM-$VERSION || exit 1 + chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -74,30 +79,36 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; +# Switch the two booleans USE_QT4 and USE_QT5 to build a Qt4 version instead. + mkdir -p build cd build - QTDIR=/usr/lib${LIBDIRSUFFIX}/qt \ + QTDIR=/usr/lib${LIBDIRSUFFIX}/qt5 \ PATH=$QTDIR/bin:$PATH \ cmake \ - $KDE_OPT_ARGS \ -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_INSTALL_PREFIX=/usr \ - -DMAN_INSTALL_DIR=/usr/man \ - -DSYSCONF_INSTALL_DIR=/etc \ -DLIB_SUFFIX=${LIBDIRSUFFIX} \ + -DUSE_QT4:BOOL=FALSE \ + -DUSE_QT5:BOOL=TRUE \ .. make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG || exit 1 -cd - +cd .. find $PKG | xargs file | grep -e "executable" -e "shared object" \ | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION -cp -a AUTHORS* COPYING* README* \ +cp -a \ + COPYING NEWS README \ $PKG/usr/doc/$PKGNAM-$VERSION +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION/doc +mv $PKG/usr/share/doc/dbusmenu-qt/* $PKG/usr/doc/$PKGNAM-$VERSION/doc +rm -rf $PKG/usr/share/doc + mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/deps/libdbusmenu-qt5/slack-desc b/deps/libdbusmenu-qt5/slack-desc new file mode 100644 index 0000000..7591a5a --- /dev/null +++ b/deps/libdbusmenu-qt5/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler-----------------------------------------------------| +libdbusmenu-qt5: libdbusmenu-qt5 (Qt5 implementation of the DBusMenu spec) +libdbusmenu-qt5: +libdbusmenu-qt5: This library provides a Qt5 implementation of the DBusMenu protocol. +libdbusmenu-qt5: The DBusMenu protocol makes it possible for applications to export +libdbusmenu-qt5: and import their menus over DBus. +libdbusmenu-qt5: +libdbusmenu-qt5: Homepage: http://people.canonical.com/~agateau/dbusmenu/ +libdbusmenu-qt5: +libdbusmenu-qt5: +libdbusmenu-qt5: +libdbusmenu-qt5: diff --git a/deps/libfakekey/libfakekey.SlackBuild b/deps/libfakekey/libfakekey.SlackBuild deleted file mode 100755 index da6d52f..0000000 --- a/deps/libfakekey/libfakekey.SlackBuild +++ /dev/null @@ -1,114 +0,0 @@ -#!/bin/sh - -# Copyright 2014 Eric Hameleers, Eindhoven, NL -# Copyright 2014 Patrick J. Volkerding, Sebeka, MN, USA -# All rights reserved. -# -# Redistribution and use of this script, with or without modification, is -# permitted provided that the following conditions are met: -# -# 1. Redistributions of this script must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED -# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO -# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, -# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; -# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR -# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF -# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -PKGNAM=libfakekey -VERSION=${VERSION:-0.1} -BUILD=${BUILD:-1} - -# Automatically determine the architecture we're building on: -if [ -z "$ARCH" ]; then - case "$(uname -m)" in - i?86) ARCH=i486 ;; - arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7lh ;; - # Unless $ARCH is already set, use uname -m for all other archs: - *) ARCH=$(uname -m) ;; - esac - export ARCH -fi - -CWD=$(pwd) -TMP=${TMP:-/tmp} -PKG=$TMP/package-$PKGNAM - -if [ "$ARCH" = "i486" ]; then - SLKCFLAGS="-O2 -march=i486 -mtune=i686" - SLKLDFLAGS="" - LIBDIRSUFFIX="" -elif [ "$ARCH" = "x86_64" ]; then - SLKCFLAGS="-O2 -fPIC" - SLKLDFLAGS="-L/usr/lib64" - LIBDIRSUFFIX="64" -elif [ "$ARCH" = "armv7hl" ]; then - SLKCFLAGS="-O3 -march=armv7-a -mfpu=vfpv3-d16" - SLKLDFLAGS="" - LIBDIRSUFFIX="64" - LIBDIRSUFFIX="" -else - SLKCFLAGS="-O2" - SLKLDFLAGS="" - LIBDIRSUFFIX="" -fi - -case "$ARCH" in - arm*) TARGET=$ARCH-slackware-linux-gnueabi ;; - *) TARGET=$ARCH-slackware-linux ;; -esac - -rm -rf $PKG -mkdir -p $TMP $PKG -cd $TMP - -rm -rf $PKGNAM-$VERSION -tar xvf $CWD/$PKGNAM-$VERSION.tar.bz2 || exit 1 -cd $PKGNAM-$VERSION || exit 1 - -# Make sure ownerships and permissions are sane: -chown -R root:root . -find . \ - \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ - -exec chmod 755 {} \; -o \ - \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ - -exec chmod 644 {} \; - -# Configure: -CFLAGS="$SLKCFLAGS" \ -CXXFLAGS="$SLKCFLAGS" \ -LDFLAGS="$SLKLDFLAGS" \ -./configure \ - --prefix=/usr \ - --libdir=/usr/lib${LIBDIRSUFFIX} \ - --disable-static \ - --build=$TARGET - -# Build and install: -make AM_LDFLAGS=-lX11 || exit 1 -make install DESTDIR=$PKG || exit 1 - -# Strip binaries (if any): -find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ - | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true - -# Add documentation: -mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION -cp -a \ - ChangeLog COPYING \ - $PKG/usr/doc/$PKGNAM-$VERSION - -# Add a package description: -mkdir -p $PKG/install -cat $CWD/slack-desc > $PKG/install/slack-desc - -# Build the package: -cd $PKG -/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz - diff --git a/deps/libfakekey/slack-desc b/deps/libfakekey/slack-desc deleted file mode 100644 index 0195f18..0000000 --- a/deps/libfakekey/slack-desc +++ /dev/null @@ -1,19 +0,0 @@ -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. -# Line up the first '|' above the ':' following the base package name, and -# the '|' on the right side marks the last column you can put a character in. -# You must make exactly 11 lines for the formatting to be correct. It's also -# customary to leave one space after the ':' except on otherwise blank lines. - - |-----handy-ruler------------------------------------------------------| -libfakekey: libfakekey (X Virtual Keyboard Library) -libfakekey: -libfakekey: X virtual keyboard library of the Matchbox WM project. -libfakekey: -libfakekey: -libfakekey: -libfakekey: -libfakekey: -libfakekey: See also: -libfakekey: https://www.yoctoproject.org/tools-resources/projects/matchbox -libfakekey: diff --git a/deps/libssh/libssh-0.6.3.tar.asc b/deps/libssh/libssh-0.6.3.tar.asc deleted file mode 100644 index 19aaf43..0000000 --- a/deps/libssh/libssh-0.6.3.tar.asc +++ /dev/null @@ -1,17 +0,0 @@ ------BEGIN PGP SIGNATURE----- -Version: GnuPG v2.0.22 (GNU/Linux) - -iQIcBAABCgAGBQJTFcWKAAoJEH7g/E3MAU49vHgP/2Fz1wc17AGNjyBsepkvd9oM -EwjNJXWhC4EcQC8RetP7RgAN4q3RtdXVNsPSU8+oNRJmOjyRKxfGQfr/+cKfvfQ6 -AAN2PufBp94EMDfUEmwpg5mpUmT5PC4kGas1L3BtbH4EAnpo67CF18uAZnEOkj45 -RJRmVNFcuE9e1RcQy8A1hZzuWzis0uC4VcnuZ5DWkokA6EX1iXWk2TyghROkL+GI -Bw4lsIohBdQWzw5HwM5IWIptElWHdz1V4YCrXoeIaR7EV7Z7vZvUrS18wxoJcUgR -fFHnU073xk/j6RZtrdV4AIlAXbVBOdDKoV4Lq6FtkkurG9Zj64p28KAuPvnS8kJ4 -PxiXn/yzbQiASItZp4LNVPq4MF11a2oDoRdDQHvUVRFaV33x+aHXhJb7wygYSr/o -HjLPW5TVyeyQqG1WPNkLwSf0o77ZIDFwlTmpstNiE1Z49DpjJwBPvuZjHYhOm4MQ -OOEPluRlViHWp7Fyeb/N8OgymFy4tcad9suthmfEayIxh8boJZW3gtah9y/l4vGM -kHj1KUTDac0MaIp8mh7+4mtoQD4A6h0hi3UbMnT4sDbIfRVwgXGDECQaiEvAgCLK -WfzdFkvdZPFI9M15YTBt9uQ3ZiwCiceo5ZUBfEDvfl7Rg7CVfgGXH97/pRzWryz8 -sT5qjM37oMaz94PsVM64 -=AMj5 ------END PGP SIGNATURE----- diff --git a/deps/libssh/libssh.SlackBuild b/deps/libssh/libssh.SlackBuild deleted file mode 100755 index 7812e4e..0000000 --- a/deps/libssh/libssh.SlackBuild +++ /dev/null @@ -1,116 +0,0 @@ -#!/bin/sh - -# Copyright 2011, 2012, 2014 Eric Hameleers, Eindhoven, NL -# Copyright 2011, 2012 Patrick J. Volkerding, Sebeka, MN, USA -# All rights reserved. -# -# Redistribution and use of this script, with or without modification, is -# permitted provided that the following conditions are met: -# -# 1. Redistributions of this script must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED -# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO -# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, -# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; -# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR -# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF -# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - - -PKGNAM=libssh -VERSION=${VERSION:-$(echo $PKGNAM-*.tar.xz | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} -BUILD=${BUILD:-1} - -NUMJOBS=${NUMJOBS:-" -j7 "} - -# Automatically determine the architecture we're building on: -MARCH=$( uname -m ) -if [ -z "$ARCH" ]; then - case "$MARCH" in - i?86) export ARCH=i486 ;; - armv7hl) export ARCH=$MARCH ;; - arm*) export ARCH=arm ;; - # Unless $ARCH is already set, use uname -m for all other archs: - *) export ARCH=$MARCH ;; - esac -fi - -if [ "$ARCH" = "i486" ]; then - SLKCFLAGS="-O2 -march=i486 -mtune=i686" - LIBDIRSUFFIX="" -elif [ "$ARCH" = "s390" ]; then - SLKCFLAGS="-O2" - LIBDIRSUFFIX="" -elif [ "$ARCH" = "x86_64" ]; then - SLKCFLAGS="-O2 -fPIC" - LIBDIRSUFFIX="64" -elif [ "$ARCH" = "armv7hl" ]; then - SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16" - LIBDIRSUFFIX="" -else - SLKCFLAGS="-O2" - LIBDIRSUFFIX="" -fi - -CWD=$(pwd) -TMP=${TMP:-/tmp} -PKG=$TMP/package-${PKGNAM} -rm -rf $PKG -mkdir -p $TMP $PKG - -cd $TMP -rm -rf ${PKGNAM}-${VERSION} -tar xvf $CWD/${PKGNAM}-$VERSION.tar.xz || exit 1 -cd ${PKGNAM}-$VERSION || exit 1 - -# These fail to build and are not packaged anyway: -#zcat $CWD/libssh.no.example.build.diff.gz | patch -p1 --verbose || exit 1 - -# Make sure ownerships and permissions are sane: -chown -R root:root . -find . \ - \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ - -exec chmod 755 {} \; -o \ - \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ - -exec chmod 644 {} \; - -# Build and install: -mkdir build -cd build - cmake \ - -DCMAKE_INSTALL_PREFIX=/usr \ - -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ - -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ - -DLIB_SUFFIX=${LIBDIRSUFFIX} \ - -DWITH_GCRYPT=1 \ - -DWITH_SSH1=1 \ - -DWITH_PCAP=1 \ - -DWITH_SFTP=1 \ - -DWITH_SERVER=1 \ - -DWITH_STATIC_LIB=0 \ - .. - make $NUMJOBS VERBOSE=1 || make || exit 1 - make install DESTDIR=$PKG || exit 1 -cd - - -# Strip binaries: -find $PKG | xargs file | grep -e "executable" -e "shared object" \ - | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - -# Add a documentation directory: -mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION -cp -a \ - AUTHORS BSD ChangeLog COPYING INSTALL README doc/{API*,libssh*.txt} \ - $PKG/usr/doc/$PKGNAM-$VERSION - -mkdir -p $PKG/install -cat $CWD/slack-desc > $PKG/install/slack-desc - -cd $PKG -/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz - diff --git a/deps/libssh/libssh.no.example.build.diff.gz b/deps/libssh/libssh.no.example.build.diff.gz Binary files differdeleted file mode 100644 index c1ef0eb..0000000 --- a/deps/libssh/libssh.no.example.build.diff.gz +++ /dev/null diff --git a/deps/libssh/slack-desc b/deps/libssh/slack-desc deleted file mode 100644 index 12a1c19..0000000 --- a/deps/libssh/slack-desc +++ /dev/null @@ -1,19 +0,0 @@ -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' on -# the right side marks the last column you can put a character in. You must make -# exactly 11 lines for the formatting to be correct. It's also customary to -# leave one space after the ':'. - - |-----handy-ruler------------------------------------------------------| -libssh: libssh (library implementing ssh protocols) -libssh: -libssh: libssh is a mulitplatform C library implementing the SSHv2 and SSHv1 -libssh: protocol on client and server side. With libssh, you can remotely -libssh: execute programs, transfer files, and use a secure and transparent -libssh: tunnel for your remote applications. -libssh: -libssh: Homepage: http://www.libssh.org/ -libssh: -libssh: -libssh: diff --git a/deps/orc/slack-desc b/deps/orc/slack-desc deleted file mode 100644 index f76fe21..0000000 --- a/deps/orc/slack-desc +++ /dev/null @@ -1,19 +0,0 @@ -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. -# Line up the first '|' above the ':' following the base package name, and -# the '|' on the right side marks the last column you can put a character in. -# You must make exactly 11 lines for the formatting to be correct. It's also -# customary to leave one space after the ':' except on otherwise blank lines. - - |-----handy-ruler------------------------------------------------------| -orc: orc (The Oil Runtime Compiler) -orc: -orc: Orc is a library and set of tools for compiling and executing very -orc: simple programs that operate on arrays of data. The language is -orc: a generic assembly language that represents many of the features -orc: available in SIMD architectures, including saturated addition and -orc: subtraction, and many arithmetic operations. -orc: -orc: -orc: Homepage: http://code.entropywave.com/projects/orc/ -orc: diff --git a/deps/phonon-gstreamer/phonon-gstreamer.SlackBuild b/deps/phonon-gstreamer/phonon-gstreamer.SlackBuild index c36c220..19cff86 100755 --- a/deps/phonon-gstreamer/phonon-gstreamer.SlackBuild +++ b/deps/phonon-gstreamer/phonon-gstreamer.SlackBuild @@ -95,26 +95,23 @@ cd build make DESTDIR=$PKG install cd - -# Conditional build of Qt5 support: -if qtpaths-qt5 --qt-version 1>/dev/null 2>/dev/null ; then - mkdir -p build-qt5 - cd build-qt5 - cmake \ - -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ - -DCMAKE_C_FLAGS_RELEASE:STRING="$SLKCFLAGS" \ - -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ - -DCMAKE_CXX_FLAGS_RELEASE:STRING="$SLKCFLAGS" \ - -DCMAKE_BUILD_TYPE=Release \ - -DCMAKE_INSTALL_PREFIX=/usr \ - -DMAN_INSTALL_DIR=/usr/man \ - -DSYSCONF_INSTALL_DIR=/etc \ - -DLIB_SUFFIX=${LIBDIRSUFFIX} \ - -DPHONON_BUILD_PHONON4QT5=ON \ - .. - make $NUMJOBS - make DESTDIR=$PKG install - cd - -fi +mkdir -p build-qt5 +cd build-qt5 + cmake \ + -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ + -DCMAKE_C_FLAGS_RELEASE:STRING="$SLKCFLAGS" \ + -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ + -DCMAKE_CXX_FLAGS_RELEASE:STRING="$SLKCFLAGS" \ + -DCMAKE_BUILD_TYPE=Release \ + -DCMAKE_INSTALL_PREFIX=/usr \ + -DMAN_INSTALL_DIR=/usr/man \ + -DSYSCONF_INSTALL_DIR=/etc \ + -DLIB_SUFFIX=${LIBDIRSUFFIX} \ + -DPHONON_BUILD_PHONON4QT5=ON \ + .. + make $NUMJOBS + make DESTDIR=$PKG install +cd - # Add documentation: mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION diff --git a/deps/phonon-vlc/slack-desc b/deps/phonon-vlc/slack-desc deleted file mode 100644 index bbab3ec..0000000 --- a/deps/phonon-vlc/slack-desc +++ /dev/null @@ -1,19 +0,0 @@ -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' -# on the right side marks the last column you can put a character in. You must -# make exactly 11 lines for the formatting to be correct. It's also -# customary to leave one space after the ':'. - - |-----handy-ruler------------------------------------------------------| -phonon-vlc: phonon-vlc (vlc backend for phonon) -phonon-vlc: -phonon-vlc: This package provides an additional vlc backend for -phonon-vlc: the phonon multimedia framework used in KDE. -phonon-vlc: -phonon-vlc: -phonon-vlc: -phonon-vlc: -phonon-vlc: -phonon-vlc: Home: http://code.google.com/p/phonon-mplayer-vlc/ -phonon-vlc: diff --git a/deps/phonon/phonon.SlackBuild b/deps/phonon/phonon.SlackBuild index 9bd85b9..45783cc 100755 --- a/deps/phonon/phonon.SlackBuild +++ b/deps/phonon/phonon.SlackBuild @@ -25,7 +25,7 @@ PKGNAM=phonon -VERSION=${VERSION:-4.8.2} +VERSION=${VERSION:-4.7.2} BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:--j7} @@ -94,27 +94,24 @@ cd build make install DESTDIR=$PKG || exit 1 cd - -# Conditional build of Qt5 support: -if qtpaths-qt5 --qt-version 1>/dev/null 2>/dev/null ; then - mkdir build-qt5 - cd build-qt5 - cmake \ - -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ - -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ - -DCMAKE_INSTALL_PREFIX=/usr \ - -DMAN_INSTALL_DIR=/usr/man \ - -DLIB_SUFFIX=${LIBDIRSUFFIX} \ - -DPHONON_INSTALL_QT_EXTENSIONS_INTO_SYSTEM_QT:BOOL=ON \ - -DPHONON_QT_PLUGIN_INSTALL_DIR=/usr/lib$LIBDIRSUFFIX/qt/plugins/designer \ - -DWITH_QZeitgeist=BOOL:OFF \ - -DWITH_PulseAudio=BOOL:OFF \ - -DPHONON_BUILD_PHONON4QT5=ON \ - -DQT_QMAKE_EXECUTABLE=/usr/bin/qmake-qt5 \ - .. - make $NUMJOBS || make || exit 1 - make install DESTDIR=$PKG || exit 1 - cd - -fi +mkdir build-qt5 +cd build-qt5 + cmake \ + -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ + -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ + -DCMAKE_INSTALL_PREFIX=/usr \ + -DMAN_INSTALL_DIR=/usr/man \ + -DLIB_SUFFIX=${LIBDIRSUFFIX} \ + -DPHONON_INSTALL_QT_EXTENSIONS_INTO_SYSTEM_QT:BOOL=ON \ + -DPHONON_QT_PLUGIN_INSTALL_DIR=/usr/lib$LIBDIRSUFFIX/qt/plugins/designer \ + -DWITH_QZeitgeist=BOOL:OFF \ + -DWITH_PulseAudio=BOOL:OFF \ + -DPHONON_BUILD_PHONON4QT5=ON \ + -DQT_QMAKE_EXECUTABLE=/usr/bin/qmake-qt5 \ + .. + make $NUMJOBS || make || exit 1 + make install DESTDIR=$PKG || exit 1 +cd - # PyQT won't find the header files otherwise: sed -i -e 's#{includedir}$#& -I\${includedir}/phonon#' $PKG/usr/lib${LIBDIRSUFFIX}/pkgconfig/phonon.pc diff --git a/deps/qt-gstreamer/qt-gstreamer.SlackBuild b/deps/polkit-qt5-1/polkit-qt5-1.SlackBuild index 72d1c99..49725e9 100755 --- a/deps/qt-gstreamer/qt-gstreamer.SlackBuild +++ b/deps/polkit-qt5-1/polkit-qt5-1.SlackBuild @@ -1,7 +1,6 @@ -#!/bin/sh +#!/bin/sh -# Copyright 2014 Patrick J. Volkerding, Sebeka, MN, USA -# Copyright 2014 Eric Hameleers, Eindhoven, NL +# Copyright 2009, 2010, 2011, 2012 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,9 +20,11 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# Modified 2014 by Eric Hameleers <alien@slackware.com> -PKGNAM=qt-gstreamer -VERSION=${VERSION:-0.10.3} + +PKGNAM=polkit-qt5-1 +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:--j7} @@ -57,16 +58,22 @@ else LIBDIRSUFFIX="" fi +# Avoid a version number in .la files: +if [ -d /usr/lib${LIBDIRSUFFIX}/qt ]; then + QTDIR=/usr/lib${LIBDIRSUFFIX}/qt +fi + CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-$PKGNAM rm -rf $PKG -mkdir -p $TMP $PKG +mkdir -p $TMP $PKG/usr cd $TMP rm -rf $PKGNAM-$VERSION tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1 cd $PKGNAM-$VERSION || exit 1 + chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -74,44 +81,30 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; +# Autodetects the Qt version to use, preferring Qt 5 over Qt 4. +# You can force a Qt 4 build passing -DUSE_QT4:bool=ON to CMake. + mkdir -p build cd build cmake \ - -DCMAKE_BUILD_TYPE=Release \ + $KDE_OPT_ARGS \ -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_INSTALL_PREFIX=/usr \ + -DMAN_INSTALL_DIR=/usr/man \ -DLIB_SUFFIX=${LIBDIRSUFFIX} \ - -DQT_VERSION=4 \ .. - make $NUMJOBS || make || exit 1 - make install DESTDIR=$PKG || exit 1 + make $NUMJOBS || make || exit 1 + make install DESTDIR=$PKG || exit 1 cd - -# Conditional build of Qt5 support: -if qtpaths-qt5 --qt-version 1>/dev/null 2>/dev/null ; then - mkdir -p build-qt5 - cd build-qt5 - cmake \ - -DCMAKE_BUILD_TYPE=Release \ - -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ - -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ - -DCMAKE_INSTALL_PREFIX=/usr \ - -DLIB_SUFFIX=${LIBDIRSUFFIX} \ - -DQT_VERSION=5 \ - .. - make $NUMJOBS || make || exit 1 - make install DESTDIR=$PKG || exit 1 - cd - -fi - if [ -d $PKG/usr/man ]; then gzip -9 $PKG/usr/man/man?/* fi mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION cp -a \ - COPYING HACKING NEWS README \ + COPYING* README* \ $PKG/usr/doc/$PKGNAM-$VERSION find $PKG | xargs file | grep -e "executable" -e "shared object" \ @@ -119,7 +112,6 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" \ mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc -zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh cd $PKG /sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/deps/polkit-qt5-1/pull-polkit-qt5-1 b/deps/polkit-qt5-1/pull-polkit-qt5-1 new file mode 100644 index 0000000..92f77b3 --- /dev/null +++ b/deps/polkit-qt5-1/pull-polkit-qt5-1 @@ -0,0 +1,9 @@ +rm -rf polkit-qt5-1 +git clone git://anongit.kde.org/polkit-qt-1 polkit-qt5-1 +curhash=$( cd polkit-qt5-1 && git log --pretty=format:'%h' -n 1 ) +pkgver=${curhash}_$(date +%Y%m%d)git +( cd polkit-qt5-1 && rm -rf .git* ) +mv polkit-qt5-1 polkit-qt5-1-$pkgver +tar cf polkit-qt5-1-$pkgver.tar polkit-qt5-1-$pkgver +xz -9 polkit-qt5-1-$pkgver.tar + diff --git a/deps/polkit-qt5-1/slack-desc b/deps/polkit-qt5-1/slack-desc new file mode 100644 index 0000000..a1f52b0 --- /dev/null +++ b/deps/polkit-qt5-1/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler-----------------------------------------------------| +polkit-qt5-1: polkit-qt5-1 (Qt5 polkit API wrapper) +polkit-qt5-1: +polkit-qt5-1: polkit-qt5-1 aims to make it easy for Qt developers to take advantage +polkit-qt5-1: of the polkit API. It is a convenience wrapper around QAction and +polkit-qt5-1: QAbstractButton that lets you integrate those two components +polkit-qt5-1: easily with polkit. +polkit-qt5-1: +polkit-qt5-1: Homepage: https://projects.kde.org/projects/kdesupport/polkit-qt-1/ +polkit-qt5-1: +polkit-qt5-1: +polkit-qt5-1: diff --git a/deps/gst1-plugins-base/gst1-plugins-base.SlackBuild b/deps/poppler/poppler.SlackBuild index c2e4a90..0ad28a4 100755 --- a/deps/gst1-plugins-base/gst1-plugins-base.SlackBuild +++ b/deps/poppler/poppler.SlackBuild @@ -1,7 +1,6 @@ #!/bin/sh -# Copyright 2014 Eric Hameleers, Eindhoven, NL -# Copyright 2014 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2006, 2007, 2008, 2009, 2010, 2012 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -10,7 +9,7 @@ # 1. Redistributions of this script must retain the above copyright # notice, this list of conditions and the following disclaimer. # -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED # WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF # MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO # EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, @@ -21,41 +20,48 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -PKGNAM=gst1-plugins-base -SRCNAM=gst-plugins-base -VERSION=${VERSION:-1.4.4} -BUILD=${BUILD:-1} + +PKGNAM=poppler +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-2} + +NUMJOBS=${NUMJOBS:-" -j7 "} + +QTPATHS=$(which qtpaths 2>/dev/null) +[ -z "$QTPATHS" ] && QTPATHS=$(which qtpaths-qt5 2>/dev/null) + +if [ "$($QTPATHS --qt-version | cut -d. -f1 2>/dev/null)x" = "5x" ]; then + CONFIG_QT5="--enable-poppler-qt5 " +else + CONFIG_QT5=" " +fi # Automatically determine the architecture we're building on: +MARCH=$( uname -m ) if [ -z "$ARCH" ]; then - case "$(uname -m)" in - i?86) ARCH=i486 ;; - arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7lh ;; + case "$MARCH" in + i?86) export ARCH=i486 ;; + armv7hl) export ARCH=$MARCH ;; + arm*) export ARCH=arm ;; # Unless $ARCH is already set, use uname -m for all other archs: - *) ARCH=$(uname -m) ;; + *) export ARCH=$MARCH ;; esac - export ARCH fi if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" - SLKLDFLAGS="" LIBDIRSUFFIX="" elif [ "$ARCH" = "s390" ]; then SLKCFLAGS="-O2" - SLKLDFLAGS="" LIBDIRSUFFIX="" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" - SLKLDFLAGS="-L/usr/lib64" LIBDIRSUFFIX="64" elif [ "$ARCH" = "armv7hl" ]; then SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16" - SLKLDFLAGS="" LIBDIRSUFFIX="" else SLKCFLAGS="-O2" - SLKLDFLAGS="" LIBDIRSUFFIX="" fi @@ -66,44 +72,47 @@ esac CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-$PKGNAM - +PKG=$TMP/package-${PKGNAM} rm -rf $PKG mkdir -p $TMP $PKG -cd $TMP -rm -rf $SRCNAM-$VERSION -tar xvf $CWD/$SRCNAM-$VERSION.tar.xz || exit 1 -cd $SRCNAM-$VERSION || exit 1 +cd $TMP || exit 1 +rm -rf ${PKGNAM}-${VERSION} +tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1 +cd ${PKGNAM}-$VERSION || exit 1 + +# Properly detect Qt5: +zcat $CWD/poppler.mocversiongrep.patch.gz | patch -p1 --verbose || exit 1 -# Make sure ownerships and permissions are sane: chown -R root:root . find . \ - \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ - -exec chmod 755 {} \; -o \ - \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ - -exec chmod 644 {} \; + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +# We patched configure.ac, so: +autoreconf -vif -# Configure: CFLAGS="$SLKCFLAGS" \ -CXXFLAGS="$SLKCFLAGS" \ -LDFLAGS="$SLKLDFLAGS" \ ./configure \ --prefix=/usr \ --libdir=/usr/lib${LIBDIRSUFFIX} \ --sysconfdir=/etc \ - --localstatedir=/var \ + --enable-xpdf-headers \ + --enable-poppler-qt4 \ + ${CONFIG_QT5} \ + --enable-cairo-output \ --mandir=/usr/man \ - --docdir=/usr/doc/$PKGNAM-$VERSION \ + --disable-static \ + --enable-zlib \ --build=$TARGET -# Build and install: -make || exit 1 +make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG || exit 1 -# Strip binaries: -find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | \ - grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true +find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ + | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null # Compress and link manpages, if any: if [ -d $PKG/usr/man ]; then @@ -120,17 +129,23 @@ if [ -d $PKG/usr/man ]; then ) fi -# Add documentation: -mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION -cp -a \ - AUTHORS COPYING* ChangeLog INSTALL NEWS RE* \ - $PKG/usr/doc/$PKGNAM-$VERSION +mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION +cp -a AUTHORS COPYING* INSTALL NEWS README README-XPDF TODO \ + $PKG/usr/doc/${PKGNAM}-$VERSION +( cd $PKG/usr/doc/${PKGNAM}-$VERSION + ln -s /usr/share/gtk-doc/html/poppler html ) + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog +fi -# Add a description: mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc -# Create the package: cd $PKG -/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz +/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz diff --git a/deps/poppler/poppler.mocversiongrep.patch.gz b/deps/poppler/poppler.mocversiongrep.patch.gz Binary files differnew file mode 100644 index 0000000..c478695 --- /dev/null +++ b/deps/poppler/poppler.mocversiongrep.patch.gz diff --git a/deps/poppler/slack-desc b/deps/poppler/slack-desc new file mode 100644 index 0000000..9d5891d --- /dev/null +++ b/deps/poppler/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler------------------------------------------------------| +poppler: poppler (a library for rendering PDF documents) +poppler: +poppler: Poppler is a library based on the xpdf PDF viewer developed by Derek +poppler: Noonburg of Glyph and Cog, LLC. Since xpdf does not provide a shared +poppler: library, whenever a flaw was found potentially dozens of applications +poppler: incorporating code from xpdf would have to be patched. By providing +poppler: a centralized PDF library this duplicated effort will be eliminated. +poppler: +poppler: +poppler: +poppler: diff --git a/deps/qt-gstreamer/slack-desc b/deps/qt-gstreamer/slack-desc deleted file mode 100644 index 3ae6605..0000000 --- a/deps/qt-gstreamer/slack-desc +++ /dev/null @@ -1,19 +0,0 @@ -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' -# on the right side marks the last column you can put a character in. You must -# make exactly 11 lines for the formatting to be correct. It's also -# customary to leave one space after the ':'. - - |-----handy-ruler-----------------------------------------------------| -qt-gstreamer: qt-gstreamer (C++ bindings for gstreamer) -qt-gstreamer: -qt-gstreamer: QtGStreamer provides C++ bindings for GStreamer with a Qt-style API, -qt-gstreamer: plus some helper classes and elements for integrating GStreamer -qt-gstreamer: better in Qt applications. -qt-gstreamer: The goal of this module is to allow easy use of GStreamer for -qt-gstreamer: applications targetting MeeGo Mobile or the KDE desktop. -qt-gstreamer: -qt-gstreamer: Homepage: -qt-gstreamer: http://gstreamer.freedesktop.org/modules/qt-gstreamer.html -qt-gstreamer: diff --git a/deps/qt-gstreamer1/doinst.sh.gz b/deps/qt-gstreamer1/doinst.sh.gz Binary files differdeleted file mode 100644 index bedb7a0..0000000 --- a/deps/qt-gstreamer1/doinst.sh.gz +++ /dev/null diff --git a/deps/qt-gstreamer1/slack-desc b/deps/qt-gstreamer1/slack-desc deleted file mode 100644 index cf20a0e..0000000 --- a/deps/qt-gstreamer1/slack-desc +++ /dev/null @@ -1,19 +0,0 @@ -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' -# on the right side marks the last column you can put a character in. You must -# make exactly 11 lines for the formatting to be correct. It's also -# customary to leave one space after the ':'. - - |-----handy-ruler-----------------------------------------------------| -qt-gstreamer1: qt-gstreamer1 (C++ bindings for gstreamer1) -qt-gstreamer1: -qt-gstreamer1: QtGStreamer provides C++ bindings for GStreamer with a Qt-style API, -qt-gstreamer1: plus some helper classes and elements for integrating GStreamer -qt-gstreamer1: better in Qt applications. -qt-gstreamer1: The goal of this module is to allow easy use of GStreamer for -qt-gstreamer1: applications targetting MeeGo Mobile or the KDE desktop. -qt-gstreamer1: -qt-gstreamer1: Homepage: -qt-gstreamer1: http://gstreamer.freedesktop.org/modules/qt-gstreamer.html -qt-gstreamer1: diff --git a/deps/qt-gstreamer/doinst.sh.gz b/deps/qt5-gstreamer/doinst.sh.gz Binary files differindex bedb7a0..bedb7a0 100644 --- a/deps/qt-gstreamer/doinst.sh.gz +++ b/deps/qt5-gstreamer/doinst.sh.gz diff --git a/deps/qt-gstreamer1/qt-gstreamer1.SlackBuild b/deps/qt5-gstreamer/qt5-gstreamer.SlackBuild index 7294f83..12be5a4 100755 --- a/deps/qt-gstreamer1/qt-gstreamer1.SlackBuild +++ b/deps/qt5-gstreamer/qt5-gstreamer.SlackBuild @@ -22,9 +22,9 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -PKGNAM=qt-gstreamer1 +PKGNAM=qt5-gstreamer SRCNAM=qt-gstreamer -VERSION=${VERSION:-1.2.0} +VERSION=${VERSION:-0.10.3} BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:--j7} @@ -60,7 +60,7 @@ fi CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/package-$PKGNAM +PKG=$TMP/package-$SRCNAM rm -rf $PKG mkdir -p $TMP $PKG @@ -75,37 +75,37 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; -mkdir -p build -cd build +# Eventually, we need to merge qt5-gstreamer into the qt-gstreamer package. +# When that happens, simply un-comment the section below and rename the package +# to qt-gstreamer. It will then have both qt4 and qt5 support. +#mkdir -p build +#cd build +# cmake \ +# -DCMAKE_BUILD_TYPE=Release \ +# -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ +# -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ +# -DCMAKE_INSTALL_PREFIX=/usr \ +# -DLIB_SUFFIX=${LIBDIRSUFFIX} \ +# -DQT_VERSION=4 \ +# .. +# make $NUMJOBS || make || exit 1 +# make install DESTDIR=$PKG || exit 1 +#cd - + +mkdir -p build-qt5 +cd build-qt5 cmake \ -DCMAKE_BUILD_TYPE=Release \ -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_INSTALL_PREFIX=/usr \ -DLIB_SUFFIX=${LIBDIRSUFFIX} \ - -DQT_VERSION=4 \ + -DQT_VERSION=5 \ .. make $NUMJOBS || make || exit 1 make install DESTDIR=$PKG || exit 1 cd - -# Conditional build of Qt5 support: -if qtpaths-qt5 --qt-version 1>/dev/null 2>/dev/null ; then - mkdir -p build-qt5 - cd build-qt5 - cmake \ - -DCMAKE_BUILD_TYPE=Release \ - -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ - -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ - -DCMAKE_INSTALL_PREFIX=/usr \ - -DLIB_SUFFIX=${LIBDIRSUFFIX} \ - -DQT_VERSION=5 \ - .. - make $NUMJOBS || make || exit 1 - make install DESTDIR=$PKG || exit 1 - cd - -fi - if [ -d $PKG/usr/man ]; then gzip -9 $PKG/usr/man/man?/* fi diff --git a/deps/qt5-gstreamer/slack-desc b/deps/qt5-gstreamer/slack-desc new file mode 100644 index 0000000..b8cbdd3 --- /dev/null +++ b/deps/qt5-gstreamer/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler-----------------------------------------------------| +qt5-gstreamer: qt5-gstreamer (C++ bindings for gstreamer) +qt5-gstreamer: +qt5-gstreamer: QtGStreamer provides C++ bindings for GStreamer with a Qt-style API, +qt5-gstreamer: plus some helper classes and elements for integrating GStreamer +qt5-gstreamer: better in Qt applications. +qt5-gstreamer: The goal of this module is to allow easy use of GStreamer for +qt5-gstreamer: applications targetting MeeGo Mobile or the KDE desktop. +qt5-gstreamer: +qt5-gstreamer: Homepage: +qt5-gstreamer: http://gstreamer.freedesktop.org/modules/qt5-gstreamer.html +qt5-gstreamer: diff --git a/deps/qt5/archive/qt5.SlackBuild1 b/deps/qt5/archive/qt5.SlackBuild1 new file mode 100644 index 0000000..b68cbe6 --- /dev/null +++ b/deps/qt5/archive/qt5.SlackBuild1 @@ -0,0 +1,265 @@ +#!/bin/sh + +# Slackware build script for qt5 + +# Copyright 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014 Patrick J. Volkerding, Sebeka, MN, USA +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +# Merged some ideas from Alex Sarmardzic's script for qt4 at SlackBuilds.org +# ^^ Modified by Robby Workman <rworkman@slackware.com> for QT4 & KDE4 + +# Modifications 2010, 2011, 2012, 2013, 2014 Eric Hameleers, Eindhoven, NL + +# Tailored to Qt5 by Larry Hajali 2013, 2014. + +PKGNAM=qt5 +SRCNAM=qt5 +VERSION=${VERSION:-5.2.1} +BUILD=${BUILD:-1} + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-$PKGNAM + +if [ -e $CWD/machine.conf ]; then + . $CWD/machine.conf ] +elif [ -e /etc/slackbuild/machine.conf ]; then + . /etc/slackbuild/machine.conf ] +else + # Automatically determine the architecture we're building on: + MARCH=$( uname -m ) + if [ -z "$ARCH" ]; then + case "$MARCH" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$MARCH ;; + esac + fi + # Set CFLAGS/CXXFLAGS and LIBDIRSUFFIX: + if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" + elif [ "$ARCH" = "s390" ]; then + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" + elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" + elif [ "$ARCH" = "arm" ]; then + SLKCFLAGS="-O2 -march=armv5te" + LIBDIRSUFFIX="" + elif [ "$ARCH" = "armv7hl" ]; then + # To prevent "qatomic_armv6.h error: output number 2 not directly addressable" + # More permanent solution is to patch gcc: + # http://bazaar.launchpad.net/~linaro-toolchain-dev/gcc-linaro/4.6/revision/106731 + SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16 -fno-strict-volatile-bitfields" + LIBDIRSUFFIX="" + else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" + fi +fi + +case "$ARCH" in + arm*) TARGET=$ARCH-slackware-linux-gnueabi ;; + *) TARGET=$ARCH-slackware-linux ;; +esac + +rm -rf $PKG +mkdir -p $TMP $PKG +cd $TMP +rm -rf ${SRCNAM}-everywhere-opensource-src-$VERSION || exit 1 +tar xvf $CWD/${SRCNAM}-everywhere-opensource-src-$VERSION.tar.xz || exit 1 +cd ${SRCNAM}-everywhere-opensource-src-$VERSION || exit 1 +chown -R root:root . +find -L . \ + \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +# Fix path to mysql header +zcat $CWD/patches/qt5.mysql.h.diff.gz | patch -p1 --verbose || exit 1 + +# Install path fix for libplatformplugin.so. +# https://bugs.webkit.org/show_bug.cgi?id=117077 +zcat $CWD/patches/platformplugin-install-path-fix.patch.gz | patch -p1 --verbose || exit 1 + +if [ $ARCH = "i486" ]; then + sed -i -e "s/QMAKE_CFLAGS_RELEASE += -O2/QMAKE_CFLAGS_RELEASE += $SLKCFLAGS/" mkspecs/common/gcc-base.conf || exit 1 +fi + +export CFLAGS="$SLKCFLAGS" +export CXXFLAGS="$SLKCFLAGS" +export OPENSOURCE_CXXFLAGS="$SLKCFLAGS" +./configure \ + -confirm-license \ + -opensource \ + -release \ + -prefix "/usr/lib${LIBDIRSUFFIX}/$PKGNAM" \ + -sysconfdir "/etc/xdg" \ + -docdir "/usr/doc/$PKGNAM-$VERSION" \ + -accessibility \ + -dbus-linked \ + -glib \ + -icu \ + -javascript-jit \ + -openssl \ + -optimized-qmake \ + -plugin-sql-sqlite \ + -qpa xcb \ + -reduce-relocations \ + -verbose \ + -xcb \ + -nomake examples \ + -no-pch \ + -no-rpath \ + -no-separate-debug-info \ + -no-strip \ + -system-harfbuzz \ + -system-libjpeg \ + -system-libpng \ + -system-pcre \ + -system-sqlite \ + -system-zlib + +# Sometimes a failure happens when parallelizing make. Try again if make fails, +# but make a failure the second time around (single threaded) a fatal error: +make $NUMJOBS || make || exit 1 +make install INSTALL_ROOT=$PKG || exit 1 + +# The infamous qt -> qt-${VERSION} link that keeps the full path out of .la files: +ln -s $PKGNAM $PKG/usr/lib${LIBDIRSUFFIX}/qt-$VERSION + +mkdir -p $PKG/usr/bin +for BIN in $PKG/usr/lib${LIBDIRSUFFIX}/$PKGNAM/bin/*; do + TMP_FILE=$(echo $BIN | sed -e "s|$PKG||") + case $(basename $BIN) in + syncqt.pl) + ln -s $TMP_FILE $PKG/usr/bin/$(basename $BIN) + ;; + *) + ln -s $TMP_FILE $PKG/usr/bin/$(basename $BIN)-$PKGNAM + ;; + esac +done + +for LIBS in $PKG/usr/lib${LIBDIRSUFFIX}/$PKGNAM/lib/*so*; do + TMP_FILE=$(echo $LIBS | sed -e "s|$PKG||") + ln -s $TMP_FILE $PKG/usr/lib${LIBDIRSUFFIX}/$(basename $LIBS) +done + +# Create Environment variables +mkdir -p $PKG/etc/profile.d +sed -e "s|@LIBDIRSUFFIX@|${LIBDIRSUFFIX}|g" $CWD/profile.d/$PKGNAM.sh \ + > $PKG/etc/profile.d/$PKGNAM.sh +sed -e "s|@LIBDIRSUFFIX@|${LIBDIRSUFFIX}|g" $CWD/profile.d/$PKGNAM.csh \ + > $PKG/etc/profile.d/$PKGNAM.csh +chmod 0755 $PKG/etc/profile.d/* + +find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \ + | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true + +# Add a missing Qt.pc which is needed by KDE applications: +mkdir -p $PKG/usr/lib${LIBDIRSUFFIX}/qt/lib/pkgconfig +cat <<EOF > $PKG/usr/lib${LIBDIRSUFFIX}/$PKGNAM/lib/pkgconfig/Qt5.pc +prefix=/usr/lib${LIBDIRSUFFIX}/$PKGNAM +bindir=\${prefix}/bin +datadir=\${prefix} +docdir=/usr/doc/$PKGNAM-$VERSION +archdatadir=\${prefix} +examplesdir=\${prefix}/examples +headerdir=\${prefix}/include +importdir=\${prefix}/imports +qmldir=\${prefix}/qml +libdir=\${prefix}/lib +libexec=\${prefix}/libexec +moc=\${bindir}/moc +plugindir=\${prefix}/plugins +qmake=\${bindir}/qmake +sysconfdir=/etc/xdg +translationdir=\${prefix}/translations + +Name: Qt5 +Description: Qt5 Configuration +Version: $VERSION +EOF + +# Fix internal linking for Qt5WebKit.pc. +sed -i \ + -e "s|-Wl,-whole-archive -lWebKit1 -Wl,-no-whole-archive -L${PWD}/qtwebkit/Source/WebKit[^ ]* ||" \ + -e "s|-Wl,-whole-archive -lWebKit2 -Wl,-no-whole-archive -L${PWD}/qtwebkit/Source/WebKit2[^ ]* ||" \ + -e "s|-Wl,-whole-archive -lWebCore -Wl,-no-whole-archive -L${PWD}/qtwebkit/Source/WebCore[^ ]* ||" \ + -e "s|-Wl,-whole-archive -lANGLE -Wl,-no-whole-archive -L${PWD}/qtwebkit/Source/ThirdParty/ANGLE[^ ]* ||" \ + -e "s|-Wl,-whole-archive -lJavaScriptCore -Wl,-no-whole-archive -L${PWD}/qtwebkit/Source/JavaScriptCore[^ ]* ||" \ + -e "s|-Wl,-whole-archive -lWTF -Wl,-no-whole-archive -L${PWD}/qtwebkit/Source/WTF[^ ]* ||" \ + $PKG/usr/lib${LIBDIRSUFFIX}/$PKGNAM/lib/pkgconfig/Qt5WebKit.pc + +# While we are at it, there isn't any reason to keep references to $PKG in the *.prl files. +for PRL in $PKG/usr/lib${LIBDIRSUFFIX}/$PKGNAM/lib/*.prl; do + sed -i '/^QMAKE_PRL_BUILD_DIR/d' $PRL +done + +# One more for the road. +sed -i "s|$PWD/qtbase|/usr/lib${LIBDIRSUFFIX}/$PKGNAM|" \ + $PKG/usr/lib${LIBDIRSUFFIX}/$PKGNAM/mkspecs/modules/qt_lib_bootstrap_private.pri + +mkdir -p $PKG/usr/lib${LIBDIRSUFFIX}/pkgconfig +for PKGCONFIG in $PKG/usr/lib${LIBDIRSUFFIX}/$PKGNAM/lib/pkgconfig/*.pc; do + TMP_FILE=$(echo $PKGCONFIG | sed -e "s|$PKG||") + ln -s $TMP_FILE $PKG/usr/lib${LIBDIRSUFFIX}/pkgconfig/$(basename $PKGCONFIG) +done + +mkdir -p $PKG/usr/lib${LIBDIRSUFFIX}/cmake +for CMAKE in $(find $PKG/usr/lib${LIBDIRSUFFIX}/$PKGNAM/lib/cmake -maxdepth 1); do + TMP_FILE=$(echo $CMAKE | sed -e "s|$PKG||") + ln -s $TMP_FILE $PKG/usr/lib${LIBDIRSUFFIX}/cmake/$(basename $CMAKE) +done + +for i in $CWD/desktop/*.desktop; do + install -D -m 0644 $i $PKG/usr/share/applications/$(basename $i) +done +sed -i "s|@LIBDIR@|$LIBDIRSUFFIX|" $PKG/usr/share/applications/* + +for i in $(find . -name "assistant.ico" -o -name "designer.ico" \ + -o -name "linguist.ico" -o -name "qdbusviewer.ico"); do + for j in 16 24 32 48 64 96 128; do + convert $i -resize ${j}x${j}! $(basename $i)-$j.png + install -D -m 0644 $(basename $i)-$j-0.png \ + $PKG/usr/share/icons/hicolor/${j}x${j}/apps/$(basename $i | sed 's|.ico||')-$PKGNAM.png + done +done + +# Remove executable bits from files. +find $PKG \( -name "*.qml" -o -name "*.app" \) -perm 755 -exec chmod 644 '{}' \; + +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION +cp -a \ + README qtbase/{header*,LGPL_EXCEPTION.txt,LICENSE.*L} \ + $PKG/usr/doc/$PKGNAM-$VERSION +cat $CWD/$PKGNAM.SlackBuild > $PKG/usr/doc/$PKGNAM-$VERSION/$PKGNAM.SlackBuild + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc +cat $CWD/doinst.sh > $PKG/install/doinst.sh + +cd $PKG +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz diff --git a/deps/qt5/archive/qt5.SlackBuild2 b/deps/qt5/archive/qt5.SlackBuild2 new file mode 100644 index 0000000..9badae3 --- /dev/null +++ b/deps/qt5/archive/qt5.SlackBuild2 @@ -0,0 +1,236 @@ +#!/bin/sh + +# Copyright 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 Patrick J. Volkerding, Sebeka, MN, USA +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +# Merged some ideas from Alex Sarmardzic's script for qt4 at SlackBuilds.org +# ^^ Modified by Robby Workman <rworkman@slackware.com> for QT4 & KDE4 + +# We're using qt-copy instead of a released qt version, as this git release +# has at least one bugfix strongly recommended by the kde developers. + +# Obtained from: +# git clone git://gitorious.org/+kde-developers/qt/kde-qt.git +# git checkout origin/4.5.3-patched +# git checkout origin/4.6.0-stable-patched +# git checkout origin/4.6.1-patched +# git checkout origin/4.7.0-patched +# +# Alternate method (we don't use this): +# wget http://qt.gitorious.org/qt/kde-qt/archive-tarball/4.6.2-patched +# +# Modifications 2010, 2011, 2012 Eric Hameleers, Eindhoven, NL +# qt 4.7.3, 4.7.4, 4.8.0, 4.8.1, 4.8.2, 4.8.4 are built from original nokia sources. +# +# More Mods 2013 Michael James, AU +# Qt 5.1.0, 5.2.0 +# +# Changes +# +# 2013/10/14 Preliminary support for 5.2.0 (alpha) +# 2013/10/14 Fixed documentation symlink qt->qt5 +# 2013/12/14 Qt 5.2 support (removed some configure options) +# 2013/12/15 Change include install path to avoid conflicts + +PKGNAM=qt5 +VERSION=$(ls qt-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev) +BUILD=${BUILD:-1} + +NUMJOBS=${NUMJOBS:--j7} + +# Automatically determine the architecture we're building on: +MARCH=$( uname -m ) +if [ -z "$ARCH" ]; then + case "$MARCH" in + i?86) export ARCH=i486 ;; + armv7hl) export ARCH=$MARCH ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$MARCH ;; + esac +fi + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "s390" ]; then + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +elif [ "$ARCH" = "armv7hl" ]; then + # To prevent "qatomic_armv6.h error: output number 2 not directly addressable" + # More permanent solution is to patch gcc: + # http://bazaar.launchpad.net/~linaro-toolchain-dev/gcc-linaro/4.6/revision/106731 + SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16 -fno-strict-volatile-bitfields" + LIBDIRSUFFIX="" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + +case "$ARCH" in + arm*) TARGET=$ARCH-slackware-linux-gnueabi ;; + *) TARGET=$ARCH-slackware-linux ;; +esac + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-${PKGNAM} + +rm -rf $PKG +mkdir -p $TMP $PKG +cd $TMP +rm -rf qt-everywhere-opensource-src-$VERSION +tar xvf $CWD/qt-everywhere-opensource-src-$VERSION.tar.?z* # For qt releases +cd qt-everywhere-opensource-src-$VERSION || exit 1 + +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +if [ $ARCH = "i486" ]; then + sed -i -e "s/QMAKE_CFLAGS_RELEASE += -O2/QMAKE_CFLAGS_RELEASE += $SLKCFLAGS/" mkspecs/common/gcc-base.conf || exit 1 +fi + +export CFLAGS="$SLKCFLAGS" +export CXXFLAGS="$SLKCFLAGS" +export OPENSOURCE_CXXFLAGS="$SLKCFLAGS" +./configure \ + -confirm-license \ + -opensource \ + -prefix /usr \ + -datadir /usr/share/qt5 \ + -libdir /usr/lib${LIBDIRSUFFIX} \ + -archdatadir /usr/lib${LIBDIRSUFFIX}/qt5 \ + -bindir /usr/lib${LIBDIRSUFFIX}/qt5/bin \ + -headerdir /usr/include/qt5 \ + -system-libpng \ + -system-libjpeg \ + -system-zlib \ + -system-sqlite \ + -plugin-sql-sqlite \ + -dbus \ + -nomake examples \ + -no-separate-debug-info \ + -no-pch + # No-precompiled-headers is ccache-friendly. + +# Sometimes a failure happens when parallelizing make. Try again if make fails, +# but make a failure the second time around (single threaded) a fatal error: +make $NUMJOBS || make || exit 1 +make install INSTALL_ROOT=$PKG || exit 1 + +find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ + | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + +# Add qtchooser config file +mkdir -p $PKG/etc/xdg/qtchooser +cat <<EOF > $PKG/etc/xdg/qtchooser/5.conf +/usr/lib${LIBDIRSUFFIX}/qt5/bin +/usr/lib${LIBDIRSUFFIX} +EOF + +# Add menu entries for all those hidden but great Qt applications: +# Qt logo: +mkdir -p $PKG/usr/share/icons/hicolor/48x48/apps +convert qtdoc/doc/src/images/qt-logo.png -resize 48x48 $PKG/usr/share/icons/hicolor/48x48/apps/qt-logo.png +# Assistant icons +install -p -m644 -D qttools/src/assistant/assistant/images/assistant.png $PKG/usr/share/icons/hicolor/32x32/apps/assistant.png +install -p -m644 -D qttools/src/assistant/assistant/images/assistant-128.png $PKG/usr/share/icons/hicolor/128x128/apps/assistant.png +# Designer icon +install -p -m644 -D qttools/src/designer/src/designer/images/designer.png $PKG/usr/share/icons/hicolor/128x128/apps/designer.png +# Linguist icons +for icon in qttools/src/linguist/linguist/images/icons/linguist-*-32.png ; do + size=$(echo $(basename ${icon}) | cut -d- -f2) + install -p -m644 -D ${icon} $PKG/usr/share/icons/hicolor/${size}x${size}/apps/linguist.png +done + +# And the .desktop files +mkdir -p $PKG/usr/share/applications +cat <<EOF > $PKG/usr/share/applications/qt5-designer.desktop +[Desktop Entry] +Name=Qt5 Designer +GenericName=Interface Designer +Comment=Design GUIs for Qt5 applications +Exec=designer -qt=5 +Icon=designer +MimeType=application/x-designer; +Terminal=false +Encoding=UTF-8 +Type=Application +Categories=Qt;Development; +EOF +cat <<EOF > $PKG/usr/share/applications/qt5-assistant.desktop +[Desktop Entry] +Name=Qt5 Assistant +Comment=Shows Qt5 documentation and examples +Exec=assistant -qt=5 +Icon=assistant +Terminal=false +Encoding=UTF-8 +Type=Application +Categories=Qt;Development;Documentation; +EOF +cat <<EOF > $PKG/usr/share/applications/qt5-linguist.desktop +[Desktop Entry] +Name=Qt5 Linguist +Comment=Add translations to Qt5 applications +Exec=linguist -qt=5 +Icon=linguist +MimeType=text/vnd.trolltech.linguist;application/x-linguist; +Terminal=false +Encoding=UTF-8 +Type=Application +Categories=Qt;Development; +EOF +cat <<EOF > $PKG/usr/share/applications/qt5-config.desktop +[Desktop Entry] +Name=Qt5 Config +Comment=Configure Qt5 behavior, styles, fonts +Exec=qtconfig -qt=5 +Icon=qt-logo +Terminal=false +Encoding=UTF-8 +Type=Application +Categories=Qt;Settings; +EOF + +# Add a documentation directory: +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION +cp -a *GPL_EXCEPTION* FAQ* INSTALL KNOWN* LICENSE* README* changes-* \ + $PKG/usr/doc/$PKGNAM-$VERSION +if [ -d $PKG/usr/lib${LIBDIRSUFFIX}/qt5/doc/html ]; then + ( cd $PKG/usr/doc/$PKGNAM-$VERSION + ln -sf /usr/lib${LIBDIRSUFFIX}/qt5/doc/html . + ) +fi + +mkdir -p $PKG/install +zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh +cat $CWD/slack-desc > $PKG/install/slack-desc + +cd $PKG +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz + diff --git a/deps/qt5/doinst.sh.gz b/deps/qt5/doinst.sh.gz Binary files differnew file mode 100644 index 0000000..e17bef4 --- /dev/null +++ b/deps/qt5/doinst.sh.gz diff --git a/deps/qt5/patches/platformplugin-install-path-fix.patch.gz b/deps/qt5/patches/platformplugin-install-path-fix.patch.gz Binary files differnew file mode 100644 index 0000000..b76f275 --- /dev/null +++ b/deps/qt5/patches/platformplugin-install-path-fix.patch.gz diff --git a/deps/qt5/patches/qt5.mysql.h.diff.gz b/deps/qt5/patches/qt5.mysql.h.diff.gz Binary files differnew file mode 100644 index 0000000..6088b7c --- /dev/null +++ b/deps/qt5/patches/qt5.mysql.h.diff.gz diff --git a/deps/qt5/profile.d/qt5.csh b/deps/qt5/profile.d/qt5.csh new file mode 100644 index 0000000..ec1ecd9 --- /dev/null +++ b/deps/qt5/profile.d/qt5.csh @@ -0,0 +1,17 @@ +#!/bin/csh +# Environment path variables for the Qt package: +if ( ! $?QT5DIR ) then + # It's best to use the generic directory to avoid + # compiling in a version-containing path: + if ( -d /usr/lib@LIBDIRSUFFIX@/qt5 ) then + setenv QT5DIR /usr/lib@LIBDIRSUFFIX@/qt5 + else + # Find the newest Qt directory and set $QT5DIR to that: + foreach qtd ( /usr/lib@LIBDIRSUFFIX@/qt5-* ) + if ( -d $qtd ) then + setenv QT5DIR $qtd + endif + end + endif +endif +set path = ( $path $QT5DIR/bin ) diff --git a/deps/qt5/profile.d/qt5.sh b/deps/qt5/profile.d/qt5.sh new file mode 100644 index 0000000..8ee075e --- /dev/null +++ b/deps/qt5/profile.d/qt5.sh @@ -0,0 +1,17 @@ +#!/bin/sh +# Environment variables for the Qt package. +# +# It's best to use the generic directory to avoid +# compiling in a version-containing path: +if [ -d /usr/lib@LIBDIRSUFFIX@/qt5 ]; then + QT5DIR=/usr/lib@LIBDIRSUFFIX@/qt5 +else + # Find the newest Qt directory and set $QT5DIR to that: + for qtd in /usr/lib@LIBDIRSUFFIX@/qt5-* ; do + if [ -d $qtd ]; then + QT5DIR=$qtd + fi + done +fi +PATH="$PATH:$QT5DIR/bin" +export QT5DIR diff --git a/deps/qt5/qt5.SlackBuild b/deps/qt5/qt5.SlackBuild new file mode 100755 index 0000000..1abaae0 --- /dev/null +++ b/deps/qt5/qt5.SlackBuild @@ -0,0 +1,294 @@ +#!/bin/sh + +# Copyright 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014 Patrick J. Volkerding, Sebeka, MN, USA +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +# Merged some ideas from Alex Sarmardzic's script for qt4 at SlackBuilds.org +# ^^ Modified by Robby Workman <rworkman@slackware.com> for QT4 & KDE4 + +# We're using qt-copy instead of a released qt version, as this git release +# has at least one bugfix strongly recommended by the kde developers. + +# Obtained from: +# git clone git://gitorious.org/+kde-developers/qt/kde-qt.git +# git checkout origin/4.5.3-patched +# git checkout origin/4.6.0-stable-patched +# git checkout origin/4.6.1-patched +# git checkout origin/4.7.0-patched +# +# Alternate method (we don't use this): +# wget http://qt.gitorious.org/qt/kde-qt/archive-tarball/4.6.2-patched +# +# Modifications 2010, 2011, 2012, 2013, 2014 Eric Hameleers, Eindhoven, NL +# qt 4.7.3, 4.7.4, 4.8.0, 4.8.1, 4.8.2, 4.8.4, are built from original nokia sources. +# +# Modifications for qt 5.2.0 2013 by Michael James, AU +# Modifications for qt 5.2.1 2014 by Eric Hameleers, Eindhoven, NL + +PKGNAM=qt5 +VERSION=$(ls qt-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev) +BUILD=${BUILD:-1} + +NUMJOBS=${NUMJOBS:--j7} + +# Automatically determine the architecture we're building on: +MARCH=$( uname -m ) +if [ -z "$ARCH" ]; then + case "$MARCH" in + i?86) export ARCH=i486 ;; + armv7hl) export ARCH=$MARCH ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$MARCH ;; + esac +fi + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + SLKLDFLAGS="" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "s390" ]; then + SLKCFLAGS="-O2" + SLKLDFLAGS="" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + SLKLDFLAGS="" + SLKLDFLAGS="-L/usr/lib64" + LIBDIRSUFFIX="64" +elif [ "$ARCH" = "armv7hl" ]; then + # To prevent "qatomic_armv6.h error: output number 2 not directly addressable" + # More permanent solution is to patch gcc: + # http://bazaar.launchpad.net/~linaro-toolchain-dev/gcc-linaro/4.6/revision/106731 + SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16 -fno-strict-volatile-bitfields" + SLKLDFLAGS="" + LIBDIRSUFFIX="" +else + SLKCFLAGS="-O2" + SLKLDFLAGS="" + LIBDIRSUFFIX="" +fi + +case "$ARCH" in + arm*) TARGET=$ARCH-slackware-linux-gnueabi ;; + *) TARGET=$ARCH-slackware-linux ;; +esac + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-${PKGNAM} + +rm -rf $PKG +mkdir -p $TMP $PKG +cd $TMP +rm -rf qt-everywhere-opensource-src-$VERSION +echo "Extracting qt-everywhere-opensource-src-$VERSION.tar.xz" +tar xf $CWD/qt-everywhere-opensource-src-$VERSION.tar.xz || exit 1 +cd qt-everywhere-opensource-src-$VERSION || exit 1 + +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +# Fix path to mysql header: +zcat $CWD/patches/qt5.mysql.h.diff.gz | patch -p1 --verbose || exit 1 + +# Install path fix for libplatformplugin.so: +# See https://bugs.webkit.org/show_bug.cgi?id=117077 +zcat $CWD/patches/platformplugin-install-path-fix.patch.gz | patch -p1 --verbose || exit 1 + +sed -i -e "s/-O2/$SLKCFLAGS/" qtbase/mkspecs/common/g++-base.conf || exit 1 +sed -i -e "s/-O2/$SLKCFLAGS/" qtbase/mkspecs/common/gcc-base.conf || exit 1 +sed -i -e "/^QMAKE_LFLAGS\s/s,+=,+= $SLKLDFLAGS,g" qtbase/mkspecs/common/gcc-base.conf || exit 1 + +export CFLAGS="$SLKCFLAGS" +export CXXFLAGS="$SLKCFLAGS" +export OPENSOURCE_CXXFLAGS="$SLKCFLAGS" +export QTDIR="${TMP}/qt-everywhere-opensource-src-${VERSION}" +export LD_LIBRARY_PATH="${QTDIR}/qtbase/lib:${QTDIR}/qttools/lib:${LD_LIBRARY_PATH}" +export QT_PLUGIN_PATH="${QTDIR}/qtbase/plugins" +./configure \ + -confirm-license \ + -opensource \ + -prefix /usr \ + -libdir /usr/lib${LIBDIRSUFFIX} \ + -bindir /usr/lib${LIBDIRSUFFIX}/qt5/bin \ + -sysconfdir /etc/xdg \ + -headerdir /usr/include/qt5 \ + -datadir /usr/share/qt5 \ + -archdatadir /usr/lib${LIBDIRSUFFIX}/qt5 \ + -docdir /usr/doc/qt5-$VERSION \ + -examplesdir /usr/doc/qt5-$VERSION/examples \ + -system-harfbuzz \ + -system-libpng \ + -system-libjpeg \ + -system-pcre \ + -system-sqlite \ + -system-zlib \ + -plugin-sql-mysql \ + -plugin-sql-sqlite \ + -accessibility \ + -dbus \ + -glib \ + -icu \ + -openssl \ + -optimized-qmake \ + -qpa xcb \ + -reduce-relocations \ + -verbose \ + -xcb \ + -nomake examples \ + -nomake tests \ + -no-separate-debug-info \ + -no-strip \ + -no-pch + # No-precompiled-headers is ccache-friendly. + +# Sometimes a failure happens when parallelizing make. Try again if make fails, +# but make a failure the second time around (single threaded) a fatal error: +make $NUMJOBS || make || exit 1 +make install INSTALL_ROOT=$PKG || exit 1 + +# Strip binaries the Slackware way: +find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ + | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + +# Fix the path in prl files: +find "$PKG/usr/lib${LIBDIRSUFFIX}" -type f -name '*.prl' \ + -exec sed -i -e '/^QMAKE_PRL_BUILD_DIR/d;s/\(QMAKE_PRL_LIBS =\).*/\1/' {} \; + +# Fix the qmake path in pri file: +sed -i "s,${QTDIR}/qtbase,/usr/lib${LIBDIRSUFFIX}/qt5," \ + $PKG/usr/lib${LIBDIRSUFFIX}/qt5/mkspecs/modules/qt_lib_bootstrap_private.pri + +# Install symlinks to the Qt5 binaries in the $PATH: +mkdir -p $PKG/usr/bin +for FILE in $PKG/usr/lib${LIBDIRSUFFIX}/qt5/bin/* ; do + ln -s ../lib${LIBDIRSUFFIX}/qt5/bin/$(basename $FILE) $PKG/usr/bin/$(basename $FILE)-qt5 +done + +# Set the QT5DIR variable in the environment: +mkdir -p $PKG/etc/profile.d +sed -e "s,@LIBDIRSUFFIX@,${LIBDIRSUFFIX},g" $CWD/profile.d/$PKGNAM.sh \ + > $PKG/etc/profile.d/$PKGNAM.sh +sed -e "s,@LIBDIRSUFFIX@,${LIBDIRSUFFIX},g" $CWD/profile.d/$PKGNAM.csh \ + > $PKG/etc/profile.d/$PKGNAM.csh +chmod 0755 $PKG/etc/profile.d/* + +# Add menu entries for all those hidden but great Qt applications: +# Qt5 logo: +mkdir -p $PKG/usr/share/icons/hicolor/48x48/apps +convert qtdoc/doc/src/images/qt-logo.png -resize 48x48 $PKG/usr/share/icons/hicolor/48x48/apps/qt5-logo.png +# Assistant icons +install -p -m644 -D qttools/src/assistant/assistant/images/assistant.png $PKG/usr/share/icons/hicolor/32x32/apps/qt5-assistant.png +install -p -m644 -D qttools/src/assistant/assistant/images/assistant-128.png $PKG/usr/share/icons/hicolor/128x128/apps/qt5-assistant.png +# Designer icon +install -p -m644 -D qttools/src/designer/src/designer/images/designer.png $PKG/usr/share/icons/hicolor/128x128/apps/qt5-designer.png +# QDbusViewer icons +install -p -m644 qttools/src/qdbus/qdbusviewer/images/qdbusviewer.png $PKG/usr/share/icons/hicolor/32x32/apps/qt5-qdbusviewer.png +install -p -m644 qttools/src/qdbus/qdbusviewer/images/qdbusviewer-128.png $PKG/usr/share/icons/hicolor/128x128/apps/qt5-qdbusviewer.png +# Linguist icons +for icon in qttools/src/linguist/linguist/images/icons/linguist-*-32.png ; do + size=$(echo $(basename ${icon}) | cut -d- -f2) + install -p -m644 -D ${icon} $PKG/usr/share/icons/hicolor/${size}x${size}/apps/qt5-linguist.png +done + +# And the .desktop files too: +mkdir -p $PKG/usr/share/applications +cat <<EOF > $PKG/usr/share/applications/qt5-designer.desktop +[Desktop Entry] +Name=Qt5 Designer +GenericName=Interface Designer +Comment=Design GUIs for Qt5 applications +Exec=designer-qt5 -qt=5 +Icon=qt5-designer +MimeType=application/x-designer; +Terminal=false +Encoding=UTF-8 +Type=Application +Categories=Qt;Development; +EOF +cat <<EOF > $PKG/usr/share/applications/qt5-assistant.desktop +[Desktop Entry] +Name=Qt5 Assistant +Comment=Shows Qt5 documentation and examples +Exec=assistant-qt5 -qt=5 +Icon=qt5-assistant +Terminal=false +Encoding=UTF-8 +Type=Application +Categories=Qt;Development;Documentation; +EOF +cat <<EOF > $PKG/usr/share/applications/qt5-linguist.desktop +[Desktop Entry] +Name=Qt5 Linguist +Comment=Add translations to Qt5 applications +Exec=linguist-qt5 -qt=5 +Icon=qt5-linguist +MimeType=text/vnd.trolltech.linguist;application/x-linguist; +Terminal=false +Encoding=UTF-8 +Type=Application +Categories=Qt;Development; +EOF +cat <<EOF > $PKG/usr/share/applications/qt5-config.desktop +[Desktop Entry] +Name=Qt5 Config +Comment=Configure Qt5 behavior, styles, fonts +Exec=qtconfig-qt5 -qt=5 +Icon=qt5-logo +Terminal=false +Encoding=UTF-8 +Type=Application +Categories=Qt;Settings; +EOF +cat <<EOF > $PKG/usr/share/applications/qt5-qdbusviewer.desktop +[Desktop Entry] +Name=Qt5 QDbusViewer +GenericName=Qt5 D-Bus Debugger +Comment=Debug D-Bus applications +Exec=qdbusviewer-qt5 +Icon=qt5-qdbusviewer +Terminal=false +Type=Application +Categories=Qt;Development;Debugger; +EOF + +# Add a documentation directory: +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION +cp -a \ + README qtbase/{header*,LGPL_EXCEPTION.txt,LICENSE*} \ + $PKG/usr/doc/$PKGNAM-$VERSION +if [ -d $PKG/usr/lib${LIBDIRSUFFIX}/qt5/doc/html ]; then + ( cd $PKG/usr/doc/$PKGNAM-$VERSION + ln -sf /usr/lib${LIBDIRSUFFIX}/qt5/doc/html . + ) +fi + +mkdir -p $PKG/install +zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh +cat $CWD/slack-desc > $PKG/install/slack-desc + +cd $PKG +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz + diff --git a/deps/eigen3/slack-desc b/deps/qt5/slack-desc index 8670031..99abf5c 100644 --- a/deps/eigen3/slack-desc +++ b/deps/qt5/slack-desc @@ -5,15 +5,15 @@ # You must make exactly 11 lines for the formatting to be correct. It's also # customary to leave one space after the ':' except on otherwise blank lines. - |-----handy-ruler------------------------------------------------------| -eigen3: Eigen3 (c++ math library) -eigen3: -eigen3: Eigen is a C++ template library for linear algebra: matrices, vectors, -eigen3: numerical solvers, and related algorithms. -eigen3: -eigen3: -eigen3: -eigen3: -eigen3: -eigen3: Homepage: http://eigen.tuxfamily.org -eigen3: + |-----handy-ruler------------------------------------------------------| +qt5: qt5 (a multi-platform C++ graphical user interface toolkit) +qt5: +qt5: Qt is a cross-platform C++ application framework. Qt's primary feature +qt5: is its rich set of widgets that provide standard GUI functionality. +qt5: +qt5: Homepage: http://qt-project.org +qt5: +qt5: +qt5: +qt5: +qt5: diff --git a/deps/shared-desktop-ontologies/slack-desc b/deps/shared-desktop-ontologies/slack-desc deleted file mode 100644 index 18412ab..0000000 --- a/deps/shared-desktop-ontologies/slack-desc +++ /dev/null @@ -1,19 +0,0 @@ -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' -# on the right side marks the last column you can put a character in. You must -# make exactly 11 lines for the formatting to be correct. It's also -# customary to leave one space after the ':'. - - |-----handy-ruler-------------------------------------------------------| -shared-desktop-ontologies: shared-desktop-ontologies (Shared OSCAF desktop ontologies) -shared-desktop-ontologies: -shared-desktop-ontologies: The shared-desktop-ontologies package brings the semantic web to -shared-desktop-ontologies: the desktop in terms of vocabulary. It contains the well known core -shared-desktop-ontologies: ontologies such as RDF and RDFS as well as the Nepomuk ontologies -shared-desktop-ontologies: which are used by projects like KDE or Strigi. -shared-desktop-ontologies: -shared-desktop-ontologies: Homepage: http://oscaf.sourceforge.net -shared-desktop-ontologies: -shared-desktop-ontologies: -shared-desktop-ontologies: diff --git a/deps/soprano/slack-desc b/deps/soprano/slack-desc deleted file mode 100644 index 44327e0..0000000 --- a/deps/soprano/slack-desc +++ /dev/null @@ -1,19 +0,0 @@ -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' -# on the right side marks the last column you can put a character in. You must -# make exactly 11 lines for the formatting to be correct. It's also -# customary to leave one space after the ':'. - - |-----handy-ruler-----------------------------------------------------| -soprano: soprano (C++/Qt4 framework for RDF data) -soprano: -soprano: Soprano (formally known as QRDF) is a library which provides -soprano: a nice Qt interface to RDF storage solutions. It has a modular -soprano: structure which allows to replace the actual RDF storage -soprano: implementation used. -soprano: -soprano: Homepage: http://soprano.sourceforge.net/ -soprano: -soprano: -soprano: diff --git a/deps/soprano/soprano.SlackBuild b/deps/soprano/soprano.SlackBuild deleted file mode 100755 index 056e5e2..0000000 --- a/deps/soprano/soprano.SlackBuild +++ /dev/null @@ -1,111 +0,0 @@ -#!/bin/sh - -# Copyright 2007-2008 Robby Workman, Northport, Alabama, USA -# Copyright 2008, 2009, 2010, 2011, 2012 Patrick J. Volkerding, Sebeka, MN, USA -# All rights reserved. - -# Redistribution and use of this script, with or without modification, is -# permitted provided that the following conditions are met: -# -# 1. Redistributions of this script must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED -# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO -# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, -# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; -# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR -# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF -# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -# Modified 2012 by Eric Hameleers <alien at slackware.com> for ARM port. - - -PKGNAM=soprano -VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} -BUILD=${BUILD:-1} - -NUMJOBS=${NUMJOBS:--j7} - -# Automatically determine the architecture we're building on: -MARCH=$( uname -m ) -if [ -z "$ARCH" ]; then - case "$MARCH" in - i?86) export ARCH=i486 ;; - armv7hl) export ARCH=$MARCH ;; - arm*) export ARCH=arm ;; - # Unless $ARCH is already set, use uname -m for all other archs: - *) export ARCH=$MARCH ;; - esac -fi - -if [ "$ARCH" = "i486" ]; then - SLKCFLAGS="-O2 -march=i486 -mtune=i686" - LIBDIRSUFFIX="" -elif [ "$ARCH" = "s390" ]; then - SLKCFLAGS="-O2" - LIBDIRSUFFIX="" -elif [ "$ARCH" = "x86_64" ]; then - SLKCFLAGS="-O2 -fPIC" - LIBDIRSUFFIX="64" -elif [ "$ARCH" = "armv7hl" ]; then - SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16" - LIBDIRSUFFIX="" -else - SLKCFLAGS="-O2" - LIBDIRSUFFIX="" -fi - -CWD=$(pwd) -TMP=${TMP:-/tmp} -PKG=$TMP/package-soprano - -rm -rf $PKG -mkdir -p $TMP $PKG -cd $TMP -rm -rf soprano-$VERSION -tar xvf $CWD/soprano-$VERSION.tar.bz2 || exit 1 -cd soprano-${VERSION}* || exit 1 - -# Restore SC/BC with a stub implementation of tcpclient (fixes smokekde): -# (fixed in soprano-2.7.57) -#cat $CWD/soprano_tcpclient_stub.diff | patch -p1 --verbose || exit 1 - -chown -R root:root . -find . \ - \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ - -exec chmod 755 {} \; -o \ - \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ - -exec chmod 644 {} \; - -mkdir -p build -cd build - QTDIR=/usr/lib${LIBDIRSUFFIX}/qt \ - PATH=$QTDIR/bin:$PATH \ - cmake \ - -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ - -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ - -DCMAKE_INSTALL_PREFIX=/usr \ - -DLIB_SUFFIX=${LIBDIRSUFFIX} \ - .. - make $NUMJOBS || make || exit 1 - make install DESTDIR=$PKG || exit 1 -cd .. - -find $PKG | xargs file | grep -e "executable" -e "shared object" \ - | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - -mkdir -p $PKG/usr/doc/soprano-$VERSION -cp -a \ - AUTHORS COPYING* ChangeLog INSTALL README TODO \ - $PKG/usr/doc/soprano-$VERSION - -mkdir -p $PKG/install -cat $CWD/slack-desc > $PKG/install/slack-desc - -cd $PKG -/sbin/makepkg -l y -c n $TMP/soprano-$VERSION-$ARCH-$BUILD.txz - diff --git a/deps/soprano/soprano_tcpclient_stub.diff b/deps/soprano/soprano_tcpclient_stub.diff deleted file mode 100644 index 2b04f66..0000000 --- a/deps/soprano/soprano_tcpclient_stub.diff +++ /dev/null @@ -1,196 +0,0 @@ -commit ed17a950a9c6f83590fa62cb97e7278ba7f3e234 -Author: Aaron Seigo <aseigo@kde.org> -Date: Wed May 30 10:18:52 2012 +0200 - - restore SC / BC with a stub impl of tcpclient - -diff --git a/client/CMakeLists.txt b/client/CMakeLists.txt -index 2689568..4e73e3c 100644 ---- a/client/CMakeLists.txt -+++ b/client/CMakeLists.txt -@@ -14,6 +14,8 @@ include_directories( - ) - - set(soprano_client_SRC -+ ${soprano_server_SOURCE_DIR}/datastream.cpp -+ tcpclient.cpp - socket.cpp - socketstream.cpp - localsocketclient.cpp -@@ -94,6 +96,7 @@ INSTALL(TARGETS sopranoclient - - install( - FILES -+ tcpclient.h - localsocketclient.h - DESTINATION include/soprano - ) -diff --git a/client/tcpclient.cpp b/client/tcpclient.cpp -index 796ca59..01dce0e 100644 ---- a/client/tcpclient.cpp -+++ b/client/tcpclient.cpp -@@ -33,151 +33,58 @@ Q_DECLARE_METATYPE( QAbstractSocket::SocketError ) - const quint16 Soprano::Client::TcpClient::DEFAULT_PORT = 5000; - - --namespace Soprano { -- namespace Client { -- class TcpClientConnection : public ClientConnection -- { -- public: -- TcpClientConnection( const QHostAddress& address, int port, QObject* parent ); -- ~TcpClientConnection(); -- -- protected: -- QIODevice* newConnection(); -- bool isConnected( QIODevice* ); -- -- private: -- QHostAddress m_address; -- int m_port; -- }; -- -- TcpClientConnection::TcpClientConnection( const QHostAddress& address, int port, QObject* parent ) -- : ClientConnection( parent ), -- m_address( address ), -- m_port( port ) -- { -- } -- -- TcpClientConnection::~TcpClientConnection() -- { -- } -- -- QIODevice* TcpClientConnection::newConnection() -- { -- clearError(); -- -- QTcpSocket* socket = new QTcpSocket; -- socket->connectToHost( m_address, m_port ); -- if ( socket->waitForConnected() ) { -- QObject::connect( socket, SIGNAL(error(QAbstractSocket::SocketError)), -- parent(), SLOT(slotError(QAbstractSocket::SocketError)) ); -- return socket; -- } -- else { -- setError( socket->errorString() ); -- delete socket; -- return 0; -- } -- } -- -- bool TcpClientConnection::isConnected( QIODevice* device ) { -- return device ? ( static_cast<QTcpSocket*>( device )->state() == QAbstractSocket::ConnectedState ) : false; -- } -- } --} -- -- --class Soprano::Client::TcpClient::Private --{ --public: -- Private() -- : connection( 0 ) { -- } -- -- TcpClientConnection* connection; --}; -- -- - Soprano::Client::TcpClient::TcpClient( QObject* parent ) - : QObject( parent ), -- d( new Private() ) -+ d( 0 ) - { -- qRegisterMetaType<QAbstractSocket::SocketError>(); -+ qWarning() << "This class is deprecated, and the implementation is only a stub now. DO NOT USE IT IN YOUR APPLICATION."; - } - - - Soprano::Client::TcpClient::~TcpClient() - { -- disconnect(); -- delete d; -+ //delete d; - } - - - bool Soprano::Client::TcpClient::connect( const QHostAddress& address, int port ) - { -- if ( !isConnected() ) { -- if ( !d->connection ) -- d->connection = new TcpClientConnection( address, port, this ); -- if ( d->connection->connect() && -- d->connection->checkProtocolVersion() ) { -- return true; -- } -- else { -- disconnect(); -- return false; -- } -- } -- else { -- setError( "Already connected" ); -- return false; -- } -+ Q_UNUSED(address) -+ Q_UNUSED(port) -+ return false; - } - - - bool Soprano::Client::TcpClient::isConnected() - { -- return d->connection ? d->connection->isConnected() : false; -+ return false; - } - - - void Soprano::Client::TcpClient::disconnect() - { -- delete d->connection; -- d->connection = 0; - } - - - Soprano::Model* Soprano::Client::TcpClient::createModel( const QString& name, const QList<BackendSetting>& settings ) - { -- if ( d->connection ) { -- int modelId = d->connection->createModel( name, settings ); -- setError( d->connection->lastError() ); -- if ( modelId > 0 ) { -- StorageModel* model = new ClientModel( 0, modelId, d->connection ); -- return model; -- } -- } -- else { -- setError( "Not connected" ); -- } -- -+ Q_UNUSED(name) -+ Q_UNUSED(settings) -+ setError( "Not connected" ); - return 0; - } - - - void Soprano::Client::TcpClient::removeModel( const QString& name ) - { -- if ( d->connection ) { -- d->connection->removeModel( name ); -- setError( d->connection->lastError() ); -- } -- else { -- setError( "Not connected" ); -- } -+ Q_UNUSED(name) -+ setError( "Not connected" ); - } - - - void Soprano::Client::TcpClient::slotError( QAbstractSocket::SocketError error ) - { -+ Q_UNUSED(error) - qDebug() << "Error: " << error; - } - diff --git a/deps/strigi/README b/deps/strigi/README new file mode 100644 index 0000000..218e8ce --- /dev/null +++ b/deps/strigi/README @@ -0,0 +1,17 @@ +trueg's blog, +http://trueg.wordpress.com/2011/09/22/about-strigi-soprano-virtuoso-clucene-and-libstreamanalyzer/ + +recommends using a newer libstreamanalyzer (and friends) than what is currently formally released. + +I ran the script +https://projects.kde.org/projects/kdesupport/strigi/strigi/repository/revisions/master/changes/createtararchive.sh +to generate a tarball, and am hosting it at: + +http://rdieter.fedorapeople.org/strigi/strigi-0.7.6.tar.bz2 +http://rdieter.fedorapeople.org/strigi/strigi-0.7.6.tar.bz2.md5sum +http://rdieter.fedorapeople.org/strigi/strigi-0.7.6.tar.bz2.sha1sum + +for others' convenience. + +-- rex + diff --git a/deps/strigi/slack-desc b/deps/strigi/slack-desc new file mode 100644 index 0000000..16dda7e --- /dev/null +++ b/deps/strigi/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler-----------------------------------------------------| +strigi: strigi (fast and light desktop search engine) +strigi: +strigi: Strigi is a fast and light desktop search engine. It can handle a +strigi: large range of file formats such as emails, office documents, media +strigi: files, and file archives. It can index files that are embedded in +strigi: other files. This means email attachments and files in zip files +strigi: are searchable as if they were normal files on your harddisk. +strigi: +strigi: Homepage: http://strigi.sourceforge.net/ +strigi: +strigi: diff --git a/deps/strigi/strigi-fix-ftbfs-with-gcc-4.7.diff.gz b/deps/strigi/strigi-fix-ftbfs-with-gcc-4.7.diff.gz Binary files differnew file mode 100644 index 0000000..e589819 --- /dev/null +++ b/deps/strigi/strigi-fix-ftbfs-with-gcc-4.7.diff.gz diff --git a/deps/strigi/strigi-fix-jpeg-isospeedratings.diff.gz b/deps/strigi/strigi-fix-jpeg-isospeedratings.diff.gz Binary files differnew file mode 100644 index 0000000..18a5581 --- /dev/null +++ b/deps/strigi/strigi-fix-jpeg-isospeedratings.diff.gz diff --git a/deps/strigi/strigi-fix-missing-lucene-lib.diff.gz b/deps/strigi/strigi-fix-missing-lucene-lib.diff.gz Binary files differnew file mode 100644 index 0000000..e0be6be --- /dev/null +++ b/deps/strigi/strigi-fix-missing-lucene-lib.diff.gz diff --git a/deps/shared-desktop-ontologies/shared-desktop-ontologies.SlackBuild b/deps/strigi/strigi.SlackBuild index af2aaeb..69c248a 100755 --- a/deps/shared-desktop-ontologies/shared-desktop-ontologies.SlackBuild +++ b/deps/strigi/strigi.SlackBuild @@ -1,8 +1,9 @@ #!/bin/sh -# Copyright 2009, 2010, 2011, 2012 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2007-2008 Robby Workman, Northport, Alabama, USA +# Copyright 2008, 2009, 2010, 2011, 2012 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. -# + # Redistribution and use of this script, with or without modification, is # permitted provided that the following conditions are met: # @@ -20,9 +21,11 @@ # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# Modified 2012, 2014 by Eric Hameleers <alien at slackware.com> for ARM port. -PKGNAM=shared-desktop-ontologies -VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} + +PKGNAM=strigi +VERSION=${VERSION:-0.7.8} BUILD=${BUILD:-1} NUMJOBS=${NUMJOBS:--j7} @@ -58,7 +61,7 @@ fi CWD=$(pwd) TMP=${TMP:-/tmp} -PKG=$TMP/$PKGNAM +PKG=$TMP/package-$PKGNAM rm -rf $PKG mkdir -p $TMP $PKG @@ -66,6 +69,18 @@ cd $TMP rm -rf $PKGNAM-$VERSION tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1 cd $PKGNAM-$VERSION || exit 1 + +#zcat $CWD/strigi-fix-ftbfs-with-gcc-4.7.diff.gz |patch -p1 --verbose || exit 1 + +# Fix a linker DSO error: +zcat $CWD/strigi-fix-missing-lucene-lib.diff.gz |patch -p1 --verbose || exit 1 + +# Fix indexing of jpegs with 'wrong' isoSpeedRatings: +zcat $CWD/strigi-fix-jpeg-isospeedratings.diff.gz |patch -p1 --verbose || exit 1 + +# Fix a bug with gcc 4.8: +sed -i -e "s/BufferedStream :/STREAMS_EXPORT &/" libstreams/include/strigi/bufferedstream.h + chown -R root:root . find . \ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ @@ -78,12 +93,13 @@ cd build QTDIR=/usr/lib${LIBDIRSUFFIX}/qt \ PATH=$QTDIR/bin:$PATH \ cmake \ - $KDE_OPT_ARGS \ + -DENABLE_INOTIFY:BOOL=ON \ + -DENABLE_DBUS:BOOL=ON \ + -DENABLE_EXPAT:BOOL=ON \ + -DCMAKE_BUILD_TYPE=Release \ -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \ -DCMAKE_INSTALL_PREFIX=/usr \ - -DMAN_INSTALL_DIR=/usr/man \ - -DSYSCONF_INSTALL_DIR=/etc \ -DLIB_SUFFIX=${LIBDIRSUFFIX} \ .. make $NUMJOBS || make || exit 1 @@ -95,7 +111,7 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" \ mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION cp -a \ - AUTHORS LICENSE* README \ + AUTHORS COPYING NEWS README TODO \ $PKG/usr/doc/$PKGNAM-$VERSION # If there's a ChangeLog, installing at least part of the recent history diff --git a/deps/strigi/strigi.info b/deps/strigi/strigi.info new file mode 100644 index 0000000..2301f49 --- /dev/null +++ b/deps/strigi/strigi.info @@ -0,0 +1,4 @@ +PRGNAM="strigi" +VERSION="0.5.9" +HOMEPAGE="http://strigi.sourceforge.net/" +DOWNLOAD="http://downloads.sourceforge.net/strigi/strigi-0.5.9.tar.bz2" diff --git a/deps/updates.SlackBuild b/deps/updates.SlackBuild index 633f48a..a69c7f9 100755 --- a/deps/updates.SlackBuild +++ b/deps/updates.SlackBuild @@ -14,23 +14,19 @@ TMP=${TMP:-/tmp} QTDIR=/usr/lib${LIBDIRSUFFIX}/qt ; export QTDIR ALLDEPS=" \ - soprano \ - akonadi \ - attica \ - shared-desktop-ontologies \ - LibRaw \ - eigen3 \ - orc \ - gstreamer1 \ - gst1-plugins-base \ - gst1-plugins-good \ + cmake \ + OpenAL \ + harfbuzz \ + qt5 \ phonon \ + qt5-gstreamer \ phonon-gstreamer \ - qt-gstreamer1 \ - xapian-core \ - libfakekey \ + strigi \ + akonadi-qt5 \ + libdbusmenu-qt5 \ + polkit-qt5-1 \ + poppler \ " - #qt-gstreamer \ # Allow for specification of individual packages to be built: if [ -z "$1" ]; then diff --git a/deps/xapian-core/slack-desc b/deps/xapian-core/slack-desc deleted file mode 100644 index 9505e7b..0000000 --- a/deps/xapian-core/slack-desc +++ /dev/null @@ -1,19 +0,0 @@ -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' -# on the right side marks the last column you can put a character in. You must -# make exactly 11 lines for the formatting to be correct. It's also -# customary to leave one space after the ':'. - - |-----handy-ruler------------------------------------------------------| -xapian-core: xapian-core (Search Engine Library) -xapian-core: -xapian-core: Xapian is an Open Source Probabilistic Information Retrieval -xapian-core: Library. It offers a highly adaptable toolkit that allows -xapian-core: developers to easily add advanced indexing and search facilities -xapian-core: to applications. -xapian-core: -xapian-core: -xapian-core: -xapian-core: xapian home: http://www.xapian.org/ -xapian-core: diff --git a/deps/xapian-core/xapian-core.SlackBuild b/deps/xapian-core/xapian-core.SlackBuild deleted file mode 100755 index 23cce40..0000000 --- a/deps/xapian-core/xapian-core.SlackBuild +++ /dev/null @@ -1,112 +0,0 @@ -#!/bin/sh - -# Copyright 2014 Patrick J. Volkerding, Sebeka, MN, USA -# Copyright 2014 Eric Hameleers, Eindhoven, NL -# All rights reserved. - -# Redistribution and use of this script, with or without modification, is -# permitted provided that the following conditions are met: -# -# 1. Redistributions of this script must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED -# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO -# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, -# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; -# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR -# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF -# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -PKGNAM=xapian-core -VERSION=${VERSION:-1.2.17} -BUILD=${BUILD:-1} - -NUMJOBS=${NUMJOBS:--j7} - -# Automatically determine the architecture we're building on: -MARCH=$( uname -m ) -if [ -z "$ARCH" ]; then - case "$MARCH" in - i?86) export ARCH=i486 ;; - armv7hl) export ARCH=$MARCH ;; - arm*) export ARCH=arm ;; - # Unless $ARCH is already set, use uname -m for all other archs: - *) export ARCH=$MARCH ;; - esac -fi - -if [ "$ARCH" = "i486" ]; then - SLKCFLAGS="-O2 -march=i486 -mtune=i686" - LIBDIRSUFFIX="" -elif [ "$ARCH" = "s390" ]; then - SLKCFLAGS="-O2" - LIBDIRSUFFIX="" -elif [ "$ARCH" = "x86_64" ]; then - SLKCFLAGS="-O2 -fPIC" - LIBDIRSUFFIX="64" -elif [ "$ARCH" = "armv7hl" ]; then - SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16" - LIBDIRSUFFIX="" -else - SLKCFLAGS="-O2" - LIBDIRSUFFIX="" -fi - -case "$ARCH" in - arm*) TARGET=$ARCH-slackware-linux-gnueabi ;; - *) TARGET=$ARCH-slackware-linux ;; -esac - -CWD=$(pwd) -TMP=${TMP:-/tmp} -PKG=$TMP/package-$PKGNAM - -rm -rf $PKG -mkdir -p $TMP $PKG -cd $TMP -rm -rf $PKGNAM-$VERSION -tar xvf $CWD/$PKGNAM-$VERSION.tar.xz || exit 1 -cd $PKGNAM-$VERSION || exit 1 - -chown -R root:root . -find . \ - \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ - -exec chmod 755 {} \; -o \ - \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ - -exec chmod 644 {} \; - -CFLAGS="$SLKCFLAGS" \ -CXXFLAGS="$SLKCFLAGS" \ -./configure \ - --prefix=/usr \ - --libdir=/usr/lib${LIBDIRSUFFIX} \ - --sysconfdir=/etc \ - --localstatedir=/var \ - --mandir=/usr/man \ - --docdir=/usr/doc/$PKGNAM-$VERSION \ - --disable-static \ - --build=$TARGET \ - || exit 1 - -make $NUMJOBS || make || exit 1 -make install DESTDIR=$PKG - -find $PKG | xargs file | grep -e "executable" -e "shared object" \ - | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - -mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION -cp -a \ - AUTHORS COPYING ChangeLog INSTALL NEWS HACKING PLATFORMS README \ - $PKG/usr/doc/$PKGNAM-$VERSION - mv $PKG/usr/doc/$PKGNAM-$VERSION/doc $PKG/usr/doc/$PKGNAM-$VERSION/html - -mkdir -p $PKG/install -cat $CWD/slack-desc > $PKG/install/slack-desc - -cd $PKG -/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz - |