From 8ff4f2f51a6cf07fc33742ce3bee81328896e49b Mon Sep 17 00:00:00 2001 From: Patrick J Volkerding Date: Fri, 25 May 2018 23:29:36 +0000 Subject: Fri May 25 23:29:36 UTC 2018 patches/packages/glibc-zoneinfo-2018e-noarch-2_slack14.1.txz: Rebuilt. Handle removal of US/Pacific-New timezone. If we see that the machine is using this, it will be automatically switched to US/Pacific. --- patches/source/httpd/httpd.SlackBuild | 246 ++++++++++++++++++++++++++++++++++ 1 file changed, 246 insertions(+) create mode 100755 patches/source/httpd/httpd.SlackBuild (limited to 'patches/source/httpd/httpd.SlackBuild') diff --git a/patches/source/httpd/httpd.SlackBuild b/patches/source/httpd/httpd.SlackBuild new file mode 100755 index 000000000..19ae0defe --- /dev/null +++ b/patches/source/httpd/httpd.SlackBuild @@ -0,0 +1,246 @@ +#!/bin/sh + +# Copyright 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2017 Patrick J. Volkerding, Sebeka, MN, USA +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +# This script was written using the one from slackbuilds.org as a reference, +# so thanks to Adis Nezirovic ( adis _at_ linux.org.ba ) for the original work. + + +PKGNAM=httpd +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.bz2 | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1_slack14.1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +NUMJOBS=${NUMJOBS:-" -j7 "} + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-${PKGNAM} +rm -rf $PKG +mkdir -p $TMP $PKG + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "s390" ]; then + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + +cd $TMP +rm -rf ${PKGNAM}-${VERSION} +tar xvf $CWD/${PKGNAM}-$VERSION.tar.bz2 || exit 1 +cd ${PKGNAM}-$VERSION || exit 1 + +# Make sure ownerships and permissions are sane: +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +# A brief note about mpms: +# +# "prefork" is the legacy forked mpm, used with mod_php. Starting with httpd +# 2.4.0, new threaded mpms are available, and previously experimental mpms are +# now stable +# +# Non-threaded mpms are no longer required, since php applications can now be +# deployed with the help of mod_fcgid, essentially a set of fixed dedicated cgi +# processes spawned for the whole purpose of executing dynamic applications +# +# Threaded mpms, by their very nature, are far more scalable than the +# traditional preforking solution. They consume less memory for the same +# workload, when serving the same amount of clients. httpd 2.4 ships with two +# options, "event" and "worker", where the former is the default mpm used if +# none is specified at the ./configure line +# +# Lastly, the "prefork" mpm can be used with mod_php as of version 5.4.0, +# which yields a much improved stability, even with most mod_php extensions +# loaded. +# +# The running mpm can be changed by simply loading the module. Here is a sample: +# LoadModule mpm_event_module lib(64)/httpd/modules/mod_mpm_event.so +# +# When upgrading from 2.2, please make sure to stop the deamon first, or your +# new instance may segfault. + +# Fix config.layout to use lib${LIBDIRSUFFIX}: +sed -i -e "s#lib/httpd#lib${LIBDIRSUFFIX}/httpd#" config.layout + +# If /var/run becomes a tmpfs or a link to /run, subdirectories could be a problem. +# Just use /var/run rather than /var/run/httpd. +sed -i -e "s#/run/httpd#/run#" config.layout + +# Configure: +CFLAGS="$SLKCFLAGS" \ +CXXFLAGS="$SLKCFLAGS" \ +./configure \ + --enable-layout=Slackware-FHS \ + --with-apr=/usr \ + --with-apr-util=/usr \ + --enable-mods-shared=all \ + --enable-so \ + --enable-mpms-shared=all \ + --enable-pie \ + --enable-cgi \ + --with-pcre \ + --enable-ssl \ + --enable-rewrite \ + --enable-vhost-alias \ + --enable-proxy \ + --enable-proxy-http \ + --enable-proxy-ftp \ + --enable-cache \ + --enable-mem-cache \ + --enable-file-cache \ + --enable-disk-cache \ + --enable-dav \ + --enable-ldap \ + --enable-authnz-ldap \ + --enable-authn-anon \ + --enable-authn-alias \ + --build=$ARCH-slackware-linux || exit 1 + +# Build and install: +make $NUMJOBS || make || exit 1 +make install DESTDIR=$PKG || exit 1 + +rmdir $PKG/usr/bin + +# Tweak default apache configuration +( cd $PKG + zcat $CWD/httpd.runasapache.diff.gz | patch -p1 --verbose || exit 1 + # mod_proxy_balancer should be commented out, as otherwise httpd + # will not start without additional configuration: + sed -i "s/^LoadModule proxy_balancer_module/#LoadModule proxy_balancer_module/g" $PKG/etc/httpd/httpd.conf + # This module issues a warning unless some non-default modules are loaded: + sed -i "s/^LoadModule lbmethod_heartbeat_module/#LoadModule lbmethod_heartbeat_module/g" $PKG/etc/httpd/httpd.conf + rm -f $PKG/etc/httpd/httpd.conf~ $PKG/etc/httpd/httpd.conf.orig +) || exit 1 +# Change config files to .new: +( cd $PKG/etc/httpd + mv httpd.conf httpd.conf.new + for file in extra/*; do + mv $file "${file}.new" + done +) + +cat << EOF >> $PKG/etc/httpd/httpd.conf.new + +# Uncomment the following line to enable PHP: +# +#Include /etc/httpd/mod_php.conf + +# Uncomment the following lines (and mod_dav above) to enable svn support: +# +#LoadModule dav_svn_module lib${LIBDIRSUFFIX}/httpd/modules/mod_dav_svn.so +#LoadModule authz_svn_module lib${LIBDIRSUFFIX}/httpd/modules/mod_authz_svn.so + +EOF + +rmdir $PKG/var/log/httpd + +mkdir -p $PKG/etc/rc.d +cat $CWD/rc.httpd > $PKG/etc/rc.d/rc.httpd.new + +mkdir -p $PKG/etc/logrotate.d +cat $CWD/logrotate.httpd > $PKG/etc/logrotate.d/httpd.new + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc +zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh + +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION/ +cp -a \ + ABOUT_APACHE Apache.dsw BuildBin.dsp CHANGES INSTALL InstallBin.dsp LAYOUT LICENSE NOTICE NWGNUmakefile README* ROADMAP VERSIONING \ + $PKG/usr/doc/$PKGNAM-$VERSION + +# Other distributions also strip the manual down to just English. +# If this isn't your language of choice, mea culpa. +( cd $PKG/srv/httpd/htdocs/manual + for file in $(find . -type f -name "*.html") ; do + if [ -f ${file}.en ]; then + cp ${file}.en ${file} + rm -f ${file}.* + fi + done +) + +# On Slackware, the traditional location for the Apache document root has always +# been "/var/www/htdocs/". We can avoid an unpleasant surprise for people by +# leaving things where they've always been, and comply with the FHS by providing +# symlinks allowing access through the FHS-approved pathnames. KDE, for example, +# will look for htdig's htsearch here: /var/www/cgi-bin/htsearch +mv $PKG/srv/httpd $PKG/var/www + +## DISABLED. Don't make these symlinks prior to packaging any more, as it is +## possibly dangerous to an existing document root created in the place where +## these symlinks are normally found. Instead, we make them in the install +## script (only if nothing exists there already) +#( cd $PKG/srv +# ln -sf /var/www . +# ln -sf /var/www httpd +#) + +# OK, it's just not generally good form to put your web site in /var/www/htdocs, +# but people do it every day. Like all new .new files, this won't save them this +# time, but if they don't learn their lesson now then it will the next time: +mv $PKG/var/www/htdocs/index.html $PKG/var/www/htdocs/index.html.new + +# Strip binaries: +find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ + | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + +# Compress and link manpages, if any: +if [ -d $PKG/usr/man ]; then + ( cd $PKG/usr/man + for manpagedir in $(find . -type d -name "man*") ; do + ( cd $manpagedir + for eachpage in $( find . -type l -maxdepth 1) ; do + ln -s $( readlink $eachpage ).gz $eachpage.gz + rm $eachpage + done + gzip -9 *.* + ) + done + ) +fi + +cd $PKG +/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz + -- cgit v1.2.3