summaryrefslogtreecommitdiffstats
path: root/testing/source/samba/samba.SlackBuild
diff options
context:
space:
mode:
Diffstat (limited to '')
-rwxr-xr-xtesting/source/samba/samba.SlackBuild257
1 files changed, 257 insertions, 0 deletions
diff --git a/testing/source/samba/samba.SlackBuild b/testing/source/samba/samba.SlackBuild
new file mode 100755
index 000000000..099c1079f
--- /dev/null
+++ b/testing/source/samba/samba.SlackBuild
@@ -0,0 +1,257 @@
+#!/bin/bash
+
+# Copyright 2008, 2009, 2010, 2012, 2013, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+# Modified 2012 by Eric Hameleers <alien at slackware.com> for ARM port.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=samba
+VERSION=${VERSION:-$(echo samba-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-2}
+
+# This option may be set to "heimdal" or "mit".
+# Upstream considers the use of MIT Kerberos for provisioning an AD DC
+# to be experimental (for now), and recommends using the bundled Heimdal.
+KERBEROS=${KERBEROS:-heimdal}
+
+if [ "$KERBEROS" = "mit" ]; then
+ KERB_OPTIONS="--with-system-mitkrb5 --with-experimental-mit-ad-dc"
+elif [ "$KERBEROS" = "heimdal" ]; then
+ # Please note that this perl module will be required: https://metacpan.org/pod/JSON
+ KERB_OPTIONS="--bundled-libraries=heimdal"
+fi
+
+if [ -e $CWD/machine.conf ]; then
+ . $CWD/machine.conf ]
+elif [ -e /etc/slackbuild/machine.conf ]; then
+ . /etc/slackbuild/machine.conf ]
+else
+ # Automatically determine the architecture we're building on:
+ if [ -z "$ARCH" ]; then
+ case "$( uname -m )" in
+ i?86) export ARCH=i586 ;;
+ arm*) export ARCH=arm ;;
+ # Unless $ARCH is already set, use uname -m for all other archs:
+ *) export ARCH=$( uname -m ) ;;
+ esac
+ fi
+ # Set CFLAGS/CXXFLAGS and LIBDIRSUFFIX:
+ if [ "$ARCH" = "i586" ]; then
+ SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+ LIBDIRSUFFIX=""
+ elif [ "$ARCH" = "s390" ]; then
+ SLKCFLAGS="-O2"
+ LIBDIRSUFFIX=""
+ elif [ "$ARCH" = "x86_64" ]; then
+ SLKCFLAGS="-O2 -fPIC"
+ LIBDIRSUFFIX="64"
+ else
+ SLKCFLAGS="-O2"
+ LIBDIRSUFFIX=""
+ fi
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+ echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+ exit 0
+fi
+
+case "$ARCH" in
+ arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+ *) TARGET=$ARCH-slackware-linux ;;
+esac
+
+NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-samba
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf samba-$VERSION
+tar xvf $CWD/samba-$VERSION.tar.?z || exit 1
+cd samba-$VERSION || exit 1
+
+# Add time.h to libsmbclient.h for ffmpeg compatibility:
+zcat $CWD/samba.libsmbclient.h.ffmpeg.compat.diff.gz | patch -p1 --verbose || exit 1
+
+if [ ! -d source3/lib/cmdline ]; then
+ ( cd source3/lib
+ mkdir cmdline
+ cd cmdline
+ ln -sf ../../../source3/include/popt_common.h . )
+fi
+
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \+ -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \+
+
+# Choose correct options depending on whether PAM is installed:
+if [ -L /lib${LIBDIRSUFFIX}/libpam.so.? ]; then
+ PAM_OPTIONS="--with-pam --with-pammodulesdir=/lib${LIBDIRSUFFIX}/security"
+ unset SHADOW_OPTIONS
+else
+ unset PAM_OPTIONS
+ SHADOW_OPTIONS="--without-pam"
+fi
+
+# Some of these options could be auto-detected, but declaring them
+# here doesn't hurt and helps document what features we're trying to
+# build in.
+#
+# LDFLAGS are needed to avoid problems with missing symbols.
+LDFLAGS="-Wl,--no-as-needed" \
+CFLAGS="$SLKCFLAGS" \
+./configure \
+ --enable-fhs \
+ --prefix=/usr \
+ --libdir=/usr/lib${LIBDIRSUFFIX} \
+ --includedir=/usr/include \
+ --bindir=/usr/bin \
+ --sbindir=/usr/sbin \
+ --mandir=/usr/man \
+ --sysconfdir=/etc \
+ --with-configdir=/etc/samba \
+ --with-piddir=/var/run \
+ --with-privatedir=/var/lib/samba/private \
+ --with-privatelibdir=/usr/lib${LIBDIRSUFFIX} \
+ --with-modulesdir=/usr/lib${LIBDIRSUFFIX} \
+ --with-lockdir=/var/cache/samba \
+ --with-logfilebase=/var/log/samba \
+ --localstatedir=/var \
+ --enable-cups \
+ --with-acl-support \
+ --with-automount \
+ --with-quotas \
+ --with-syslog \
+ --with-utmp \
+ --with-winbind \
+ --with-ldap \
+ --with-ads \
+ --without-fam \
+ $KERB_OPTIONS \
+ $PAM_OPTIONS \
+ $SHADOW_OPTIONS \
+ --build=$TARGET || exit 1
+ # Gives errors:
+ #--builtin-libraries=replace,ccan \
+
+# Build with waf directly so that multiple jobs work.
+# Script lifted from "./configure".
+PREVPATH=$(dirname $0)
+WAF=./buildtools/bin/waf
+# using JOBS=1 gives maximum compatibility with
+# systems like AIX which have broken threading in python
+JOBS=$(echo $NUMJOBS | tr -dc '0-9')
+export JOBS
+# Make sure we don't have any library preloaded.
+unset LD_PRELOAD
+# Make sure we get stable hashes
+PYTHONHASHSEED=1
+export PYTHONHASHSEED
+cd . || exit 1
+${PYTHON:=python3} $WAF build "$@" || exit 1
+cd $PREVPATH
+
+mkdir -p \
+ $PKG/usr/doc/samba-$VERSION \
+ $PKG/var/spool/samba \
+ $PKG/var/log/samba \
+ $PKG/var/lib/samba/private \
+ $PKG/var/cache/samba
+chmod 700 $PKG/var/lib/samba/private
+chmod 1777 $PKG/var/spool/samba
+
+# Again, use waf directly to allow multithreading:
+#make install DESTDIR=$PKG || exit 1
+DESTDIR=$PKG
+export DESTDIR
+${PYTHON:=python3} $WAF install "$@" || exit 1
+
+# Install the smbprint script:
+install -m0744 packaging/printing/smbprint $PKG/usr/bin/smbprint
+
+# Add a sample config file:
+cat $CWD/smb.conf.default > $PKG/etc/samba/smb.conf-sample
+
+# Setup a default lmhosts file:
+echo "127.0.0.1 localhost" > $PKG/etc/samba/lmhosts.new
+
+if [ ! -r $PKG/usr/bin/smbget ]; then
+ rm -f $PKG/usr/share/man/man1/smbget.1
+fi
+
+# We'll add rc.samba to the init directory, but chmod 644 so that it doesn't
+# start by default:
+mkdir -p $PKG/etc/rc.d
+cat $CWD/rc.samba > $PKG/etc/rc.d/rc.samba.new
+chmod 644 $PKG/etc/rc.d/rc.samba.new
+
+mv $PKG/usr/share/man $PKG/usr
+gzip -9 $PKG/usr/man/man?/*.?
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" \
+ | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+# PAM related stuff we don't use:
+rm -r $PKG/usr/share/locale
+rm -f $PKG/usr/man/man8/pam*
+
+cp -a \
+ COPYING* MAINTAINERS Manifest PFIF.txt README* \
+ Read-Manifest-Now Roadmap WHATSNEW.txt docs examples \
+ $PKG/usr/doc/samba-$VERSION
+# These are installed elsewhere:
+rm -rf $PKG/usr/doc/samba-$VERSION/docs/htmldocs \
+ $PKG/usr/doc/samba-$VERSION/docs/manpages
+# Empty now?
+rmdir $PKG/usr/doc/samba-$VERSION/docs 2> /dev/null
+# I'm sorry, but when all this info is included in HTML, adding 7MB worth of
+# PDF files just to have extra artwork is more fluff than I'll agree to.
+rm -f $PKG/usr/doc/samba-$VERSION/docs/*.pdf
+# Also redundant also:
+rm -rf $PKG/usr/doc/samba-$VERSION/docs/docbook
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+
+cat << EOF
+
+*** Be sure the package contains:
+
+drwxr-xr-x 2 root root 4096 May 3 15:46 /var/cache/samba/
+drwx------ 2 root root 1024 Mar 12 13:21 /var/lib/samba/private
+drwxr-xr-x 2 root root 48 Aug 29 13:06 /var/log/samba/
+drwxrwxrwt 2 root root 1024 Mar 12 13:21 /var/spool/samba/
+
+EOF
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/samba-$VERSION-$ARCH-$BUILD.txz