diff options
Diffstat (limited to 'testing/source/pkgtools/scripts/makebootdisk')
| -rw-r--r-- | testing/source/pkgtools/scripts/makebootdisk | 443 |
1 files changed, 0 insertions, 443 deletions
diff --git a/testing/source/pkgtools/scripts/makebootdisk b/testing/source/pkgtools/scripts/makebootdisk deleted file mode 100644 index 793796181..000000000 --- a/testing/source/pkgtools/scripts/makebootdisk +++ /dev/null @@ -1,443 +0,0 @@ -#!/bin/sh -# Copyright 1995, 1998, 2002, 2005 Patrick Volkerding, Moorhead, Minnesota USA -# All rights reserved. -# -# Redistribution and use of this script, with or without modification, is -# permitted provided that the following conditions are met: -# -# 1. Redistributions of this script must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED -# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO -# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, -# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; -# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR -# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF -# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -# - -if [ ! "$UID" = "0" ]; then - echo "You need to be root to run this script." - exit 1 -fi - -# Was a kernel specified on the command line? -if [ -r "$1" ]; then - KERNEL=$1 - KMSG="Using kernel $KERNEL" -else - KMSG="No kernel selected yet" -fi - -# Make sure there's a proper temp directory: -TMP=/var/lib/pkgtools/setup/tmp -# If the $TMP directory doesn't exist, create it: -if [ ! -d $TMP ]; then - mkdir -p $TMP - chmod 700 $TMP # no need to leave it open -fi - -ROOT_DEVICE="`mount | grep ' on / ' | cut -f 1 -d ' '`" - -if mount | grep ' on / ' | grep umsdos 1> /dev/null 2> /dev/null ; then - MOUNT="read-write" -else - MOUNT="read-only" -fi - -make_root_device() { -# Make a device: -makedev() { - if [ ! -b $1 ]; then - mknod $1 b $2 $3 - chown root.disk $1 - chmod 640 $1 - fi -} - -# Make ide device -# make ide major minor hd1 hd2 (2 base devs for major) -make_ide() { - # Handle base devices: - if [ "$2" = "0" ]; then - makedev $TMP/lilo/dev/$3 $1 $2 - return 0 - elif [ "$2" = "64" ]; then - makedev $TMP/lilo/dev/$4 $1 $2 - return 0 - fi - # Must be a partition: - if [ "`expr $2 / 64`" = "0" ]; then - DEV=$3 - NUM=$2 - else - DEV=$4 - NUM=`expr $2 - 64` - fi - makedev $TMP/lilo/dev/$DEV$NUM $1 $2 -} - -# Make SCSI device -make_scsi() { - # find drive # 0 - 15 - DRV=`expr $1 / 16` - NUM=`expr $1 % 16` - if [ "$NUM" = "0" ]; then - NUM="" - fi - if [ "$DRV" = "0" ]; then - makedev $TMP/lilo/dev/sda$NUM 8 $1 - elif [ "$DRV" = "1" ]; then - makedev $TMP/lilo/dev/sdb$NUM 8 $1 - elif [ "$DRV" = "2" ]; then - makedev $TMP/lilo/dev/sdc$NUM 8 $1 - elif [ "$DRV" = "3" ]; then - makedev $TMP/lilo/dev/sdd$NUM 8 $1 - elif [ "$DRV" = "4" ]; then - makedev $TMP/lilo/dev/sde$NUM 8 $1 - elif [ "$DRV" = "5" ]; then - makedev $TMP/lilo/dev/sdf$NUM 8 $1 - elif [ "$DRV" = "6" ]; then - makedev $TMP/lilo/dev/sdg$NUM 8 $1 - elif [ "$DRV" = "7" ]; then - makedev $TMP/lilo/dev/sdh$NUM 8 $1 - elif [ "$DRV" = "8" ]; then - makedev $TMP/lilo/dev/sdi$NUM 8 $1 - elif [ "$DRV" = "9" ]; then - makedev $TMP/lilo/dev/sdj$NUM 8 $1 - elif [ "$DRV" = "10" ]; then - makedev $TMP/lilo/dev/sdk$NUM 8 $1 - elif [ "$DRV" = "11" ]; then - makedev $TMP/lilo/dev/sdl$NUM 8 $1 - elif [ "$DRV" = "12" ]; then - makedev $TMP/lilo/dev/sdm$NUM 8 $1 - elif [ "$DRV" = "13" ]; then - makedev $TMP/lilo/dev/sdn$NUM 8 $1 - elif [ "$DRV" = "14" ]; then - makedev $TMP/lilo/dev/sdo$NUM 8 $1 - elif [ "$DRV" = "15" ]; then - makedev $TMP/lilo/dev/sdp$NUM 8 $1 - fi -} - -if cat /proc/partitions | grep / 1> /dev/null 2> /dev/null ; then # new - cat /proc/partitions | grep / | while read line ; do - SMASHED_LINE=$line - MAJOR=`echo $SMASHED_LINE | cut -f 1 -d ' '` - MINOR=`echo $SMASHED_LINE | cut -f 2 -d ' '` - if [ "$MAJOR" = "3" ]; then - make_ide $MAJOR $MINOR hda hdb - elif [ "$MAJOR" = "8" ]; then - make_scsi $MINOR - elif [ "$MAJOR" = "22" ]; then - make_ide $MAJOR $MINOR hdc hdd - elif [ "$MAJOR" = "33" ]; then - make_ide $MAJOR $MINOR hde hdf - elif [ "$MAJOR" = "34" ]; then - make_ide $MAJOR $MINOR hdg hdh - elif [ "$MAJOR" = "56" ]; then - make_ide $MAJOR $MINOR hdi hdj - fi - done -else # old format - cat /proc/partitions | grep d | while read line ; do - SMASHED_LINE=$line - MAJOR=`echo $SMASHED_LINE | cut -f 1 -d ' '` - MINOR=`echo $SMASHED_LINE | cut -f 2 -d ' '` - DEVNAME=`echo $SMASHED_LINE | cut -f 4 -d ' '` - makedev $TMP/lilo/dev/$DEVNAME $MAJOR $MINOR - done -fi -} - -choose_kernel() { -while [ 0 ]; do # input loop -cat << EOF > $TMP/tmpmsg - -Some possible paths to kernels are these: - -/boot/vmlinuz -/usr/src/linux/arch/i386/boot/bzImage -/usr/src/linux/arch/i386/boot/zImage -/vmlinuz - -Put the path to the kernel you want to use in the box below. - -EOF - - dialog --title "CHOOSE KERNEL" --inputbox "`cat $TMP/tmpmsg`" \ - 16 72 "/boot/vmlinuz" 2> $TMP/return - if [ ! $? = 0 ]; then - exit - fi - - KERNEL="`cat $TMP/return`" - - if [ ! -r "$KERNEL" ]; then - dialog --title "NOT FOUND!" --msgbox "$KERNEL" 5 60 - continue - fi - KMSG="Using kernel $KERNEL" -break -done -} - -format_disk() { - # If anyone still uses 1.2 MB, you'll have to uncomment this. - # It's no longer a default option. - #FDEV=/dev/fd0h1200 - #FDEV=/dev/fd0u1400 - FDEV=/dev/fd0u1680 - if [ "$FDEV" = "/dev/fd0u1680" ]; then - dialog --title "Formatting /dev/fd0u1680" --infobox \ - "Formatting /dev/fd0, 1.68 megabytes." 3 42 - elif [ "$FDEV" = "/dev/fd0u1400" ]; then - dialog --title "Formatting /dev/fd0u1440" --infobox \ - "Formatting /dev/fd0, 1.44 megabytes." 3 42 - elif [ "$FDEV" = "/dev/fd0h1200" ]; then - dialog --title "Formatting /dev/fd0h1200" --infobox \ - "Formatting /dev/fd0, 1.2 megabytes." 3 42 - fi - fdformat $FDEV 1> /dev/null 2> /dev/null - if [ ! $? = 0 ]; then - dialog --title "ERROR: FLOPPY FORMAT FAILED" --msgbox "The attempt to format the floppy \ -disk in /dev/fd0 has failed, probably due to bad media. Please try again with a \ -different disk. If that doesn't work, perhaps the drive needs cleaning." 0 0 - return 1 - fi -} - -DEFAULT_ITEM="syslinux" - -while [ 0 ]; do # menu loop - dialog --title "MAKE BOOT FLOPPY FROM KERNEL" \ ---default-item $DEFAULT_ITEM \ ---backtitle "$KMSG" --menu "This menu allows you to make a SYSLINUX bootdisk \ -from a compiled kernel. The SYSLINUX bootloader has the advantage of \ -using a FAT filesystem making it easy to replace the kernel later. \ -Which option would you like?" 12 67 2 \ -"syslinux" "Make a SYSLINUX bootdisk" \ -"exit" "Exit this program" 2> $TMP/return - if [ ! $? = 0 ]; then - break; - fi - REPLY=`cat $TMP/return` - rm -f $TMP/return - if [ "$REPLY" = "simple" ]; then # make simple bootdisk - if [ "$KERNEL" = "" ]; then - choose_kernel - fi - kernel_size=`du -Lk $KERNEL | cut -f1` - if [ "$kernel_size" -gt "1023" ]; then -cat << EOF > $TMP/tmpmsg - -The kernel $KERNEL is $kernel_size K (which is -more than 1023 Kb in size), so it probably won't -boot standalone on the floppy. Use the 'syslinux' -method instead. - -EOF - dialog --title "KERNEL TOO BIG!" --msgbox "`cat $TMP/tmpmsg`" 10 60 - continue - fi - dialog --title "BOOT DISK CREATION" --backtitle "$KMSG" --yesno \ -"\n\ -Now put a formatted floppy in your boot drive. \n\ -This will be made into your Linux boot disk. Use this to\n\ -boot Linux until LILO has been configured to boot from\n\ -the hard drive.\n\n\ -Any data on the target disk will be destroyed.\n\n\ -YES creates the disk, NO aborts.\n" 14 62 - if [ $? = 0 ]; then - format_disk - dialog --title "CREATING DISK" --infobox "Creating boot disk from $KERNEL..." 5 72 - dd if=$KERNEL of=/dev/fd0 2> /dev/null - rdev /dev/fd0 $ROOT_DEVICE - rdev -v /dev/fd0 -1 - if [ "$MOUNT" = "read-only" ]; then - rdev -R /dev/fd0 1 - else - rdev -R /dev/fd0 0 - fi - fi - elif [ "$REPLY" = "syslinux" ]; then # make syslinux bootdisk - DEFAULT_ITEM="exit" - if [ "$KERNEL" = "" ]; then - choose_kernel - fi - dialog --title "CREATING SYSLINUX BOOTDISK IN /dev/fd0" --backtitle "$KMSG" --yesno "Now put a \ -floppy in your boot drive. This will be made into a SYSLINUX \ -bootdisk that you can use to start your Linux system. Any data on the \ -target disk will be destroyed. YES creates the disk, NO aborts." 8 62 - if [ $? = 0 ]; then # make the disk - format_disk - if [ ! $? = 0 ]; then - continue - fi - dialog --title "CREATING BOOT FLOPPY" --infobox "Creating SYSLINUX bootdisk for \ -$ROOT_DEVICE in /dev/fd0." 3 64 - mkdosfs -F 12 /dev/fd0u1680 1680 1> /dev/null 2> /dev/null - if [ ! -d $TMP/bootdisk ]; then - mkdir $TMP/bootdisk - fi - mount -t vfat /dev/fd0 $TMP/bootdisk 1> /dev/null 2> /dev/null - cp $KERNEL $TMP/bootdisk/vmlinuz - ## This avoids a syslinux-1.72 bug, and doesn't seem to hurt anything: - #dd if=/dev/zero bs=1k count=1 >> $TMP/bootdisk/vmlinuz 2> /dev/null - if [ ! "$?" = "0" ]; then - dialog --title "ERROR COPYING KERNEL TO FLOPPY" \ - --msgbox "Sorry, but there was an error copying the kernel to the \ -floppy disk. Possibly the kernel is too large to fit the disk. \ -This program will now exit." 0 0 - umount /dev/fd0 - rm -rf $TMP/bootdisk - exit 1 - fi - cat << EOF > $TMP/bootdisk/message.txt - -Welcome to the 09Slackware07 Linux custom bootdisk! - -By default, this disk boots a root Linux partition on $ROOT_DEVICE when you -hit ENTER. If you'd like to boot some other partition, use a command like -this on the prompt below: - - mount root=/dev/sda1 ro - -Where "/dev/sda1" is the partition you want to boot, and "ro" specifies that -the partition should be initially mounted as read-only. If you wish to mount -the partition read-write, use "rw" instead. To set the video console mode, -use the vga= parameter (press F1 to see a table). You may also add any other -kernel parameters you might need depending on your hardware, and which -drivers are included in your kernel. - -EOF - cat << EOF > $TMP/bootdisk/syslinux.cfg -default vmlinuz ramdisk_size=7000 root=$ROOT_DEVICE vga=normal ro -prompt 1 -timeout 6000 -display message.txt -F1 f1.txt -F2 message.txt -#F3 f3.txt -#F4 f4.txt -#F5 f5.txt -#F6 f6.txt -#F7 f7.txt -label mount - kernel vmlinuz - append ramdisk_size=7000 root=$ROOT_DEVICE vga=normal ro -label ramdisk - kernel vmlinuz - append vmlinuz ramdisk_size=7000 root=/dev/fd0u1440 vga=normal rw -EOF - cat << EOF > $TMP/bootdisk/f1.txt - STANDARD MODES: - To make the kernel prompt for standard video modes use: vga=ask - - FRAMEBUFFER MODES: - To get the kernel to start in VESA framebuffer mode, you need to pass it - a vga= init string on the "boot:" prompt. Here's a table: - - Colors 640x480 800x600 1024x768 1280x1024 1600x1200 - --------+--------------------------------------------- - 256 | 769 771 773 775 796 - 32,768 | 784 787 790 793 797 - 65,536 | 785 788 791 794 798 - 16.8M | 786 789 792 795 799 - - ...such as this for 1024x768x64k: - vga=791 - - F2 returns to the previous page. - -EOF - umount /dev/fd0 - syslinux-nomtools -s /dev/fd0 - rm -r $TMP/bootdisk - fi - elif [ "$REPLY" = "lilo" ]; then # make lilo bootdisk - DEFAULT_ITEM="exit" - if [ ! -x "`type -path lilo`" ]; then -cat << EOF > $TMP/tmpmsg - -You don't have 'lilo' installed on the system. -I guess you didn't install the lilo package. - -EOF - dialog --title "LILO NOT FOUND" --msgbox "`cat $TMP/tmpmsg`" 8 60 - continue - fi - if [ "$KERNEL" = "" ]; then - choose_kernel - fi - dialog --title "CREATING LILO BOOTDISK IN /dev/fd0" --backtitle "$KMSG" --yesno "Now put a \ -floppy in your boot drive. This will be made into a LILO \ -bootdisk that you can use to start your Linux system. Any data on the \ -target disk will be destroyed. YES creates the disk, NO aborts." 8 62 - if [ $? = 0 ]; then # make the disk - format_disk - DEV=/dev/fd0u1680 - mknod_fd="-m 0640 $TMP/lilo$DEV b 2 44" - dialog --infobox "Creating LILO bootdisk from $KERNEL for $ROOT_DEVICE..." 4 60 - mke2fs -q -m 0 -i 4096 $DEV 1> /dev/null 2> /dev/null || exit 1 - if [ ! -d $TMP/lilo ]; then - mkdir -p $TMP/lilo - fi - mount -t ext2 $DEV $TMP/lilo 1> /dev/null || exit 1 - rmdir $TMP/lilo/lost+found - cp $KERNEL $TMP/lilo/vmlinuz || exit 1 - mkdir $TMP/lilo/dev - make_root_device - mknod -m 0640 $TMP/lilo/dev/fd0 b 2 0 - mknod -m 0640 $TMP/lilo/dev/fd1 b 2 1 - mknod $mknod_fd - mknod -m 0666 $TMP/lilo/dev/null c 1 3 - mkdir $TMP/lilo/etc - cat << EOF > $TMP/lilo/etc/lilo.conf -boot = $DEV -message=/boot/message -backup=/dev/null -prompt -image = /vmlinuz - label = mount - ramdisk = 0 - root = $ROOT_DEVICE - vga = normal - $MOUNT -EOF - mkdir $TMP/lilo/boot - cp -a /boot/chain.b $TMP/lilo/boot - if [ -f /boot/boot-text.b ]; then - cp -a /boot/boot-text.b $TMP/lilo/boot/boot.b - else - cp -a /boot/boot.b $TMP/lilo/boot - fi - cat << EOF > $TMP/lilo/boot/message - -Welcome to the Slackware Linux custom LILO bootdisk! - -By default, this disk boots a root Linux partition on $ROOT_DEVICE when -you hit ENTER. If you'd like to boot some other partition, use a command -like this on the LILO prompt below: - - mount root=/dev/sda1 ro - -Where "/dev/sda1" is the partition you want to boot, and "ro" specifies that -the partition should be initially mounted as read-only. If you which to mount -the partition read-write, use "rw" instead. You may also add any other kernel -parameters you might need depending on your hardware, and which drivers are -included in your kernel. - -EOF - lilo -r $TMP/lilo > /dev/null - umount $TMP/lilo - rm -rf $TMP/lilo - fi - elif [ "$REPLY" = "exit" ]; then - break; - fi -done |