diff options
Diffstat (limited to 'testing/source/glibc/glibc.SlackBuild')
| -rwxr-xr-x | testing/source/glibc/glibc.SlackBuild | 512 |
1 files changed, 512 insertions, 0 deletions
diff --git a/testing/source/glibc/glibc.SlackBuild b/testing/source/glibc/glibc.SlackBuild new file mode 100755 index 000000000..96dfe6598 --- /dev/null +++ b/testing/source/glibc/glibc.SlackBuild @@ -0,0 +1,512 @@ +#!/bin/bash + +# Copyright 2006, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 Patrick J. Volkerding, Sebeka, MN, USA +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +cd $(dirname $0) ; CWD=$(pwd) + +PKGNAM=glibc +VERSION=${VERSION:-$(echo glibc-*.tar.xz | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +CHECKOUT=${CHECKOUT:-""} +BUILD=${BUILD:-1} + +# I was considering disabling NSCD, but MoZes talked me out of it. :) +#DISABLE_NSCD=" --disable-nscd " + +# $ARCH may be preset, otherwise i586 compatibility with i686 binary +# structuring is the Slackware default. +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i586 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +# If the variable PRINT_PACKAGE_NAME is set, then this script will report what +# the name of the created package would be, and then exit. This information +# could be useful to other scripts. +if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then + echo "glibc-$VERSION-$ARCH-$BUILD.txz" + echo "glibc-i18n-$VERSION-$ARCH-$BUILD.txz" + echo "glibc-profile-$VERSION-$ARCH-$BUILD.txz" + echo "aaa_glibc-solibs-$VERSION-$ARCH-$BUILD.txz" + exit 0 +fi + +NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "} + +# Work around -Werror failure with gcc-10.2.0. +# NOTE: Until the next glibc release takes care of this issue, this will +# likely need to be updated with every new gcc release's version. Yes, we +# could pass --disable-werror by default, but I'd rather not just shove a +# stick in it like that. +if [ "$(gcc -dumpversion)" = "10.2.0" ]; then + if [ "$VERSION" = "2.30" ]; then + WERROR="--disable-werror" + fi +fi + +# I'll break this out as an option for fun :-) +case $ARCH in + i386) + OPTIMIZ="-O3 -march=i386 -mcpu=i686" + LIBDIRSUFFIX="" + ;; + i486) + OPTIMIZ="-O3 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" + ;; + i586) + OPTIMIZ="-O3 -march=i586 -mtune=i686" + LIBDIRSUFFIX="" + ;; + i686) + OPTIMIZ="-O3 -march=i686" + LIBDIRSUFFIX="" + ;; + athlon) + OPTIMIZ="-O3 -march=athlon" + LIBDIRSUFFIX="" + ;; + s390) + OPTIMIZ="-O3" + LIBDIRSUFFIX="" + ;; + x86_64) + OPTIMIZ="-O3 -fPIC" + LIBDIRSUFFIX="64" + ;; + *) + OPTIMIZ="-O3" + LIBDIRSUFFIX="" + ;; +esac + +case $ARCH in + x86_64) + TARGET=${TARGET:-x86_64} + ;; + i586) + # This should be i586 for all 32-bit x86 arch: + TARGET=${TARGET:-i586} + ;; +esac + +# Hand off the $ARCH variable to $SLACKWARE_ARCH to avoid confusing glibc: +SLACKWARE_ARCH=$ARCH +unset ARCH + +CVSVER=${VERSION}${CHECKOUT} + +# NOTE!!! glibc needs to be built against the sanitized kernel headers, +# which will be installed under /usr/include by the kernel-headers package. +# Be sure the correct version of the headers package is installed BEFORE +# building glibc! + +TMP=${TMP:-/tmp} +mkdir -p $TMP + +# This function fixes a doinst.sh file for x86_64. +# With thanks to Fred Emmott. +fix_doinst() { + if [ "x$LIBDIRSUFFIX" = "x" ]; then + return; + fi; + # Fix "( cd usr/lib ;" occurrences + sed -i "s#lib ;#lib${LIBDIRSUFFIX} ;#" install/doinst.sh + # Fix "lib/" occurrences + sed -i "s#lib/#lib${LIBDIRSUFFIX}/#g" install/doinst.sh + # Fix "( cd lib" occurrences + sed -i "s#( cd lib\$#( cd lib${LIBDIRSUFFIX}#" install/doinst.sh + + if [ "$SLACKWARE_ARCH" = "x86_64" ]; then + sed -i 's#ld-linux.so.2#ld-linux-x86-64.so.2#' install/doinst.sh + fi +} + +# This is a patch function to put all glibc patches in the build script +# up near the top. +apply_patches() { + # Use old-style locale directories rather than a single (and strangely + # formatted) /usr/lib/locale/locale-archive file: + zcat $CWD/glibc.locale.no-archive.diff.gz | patch -p1 --verbose || exit 1 + # Support ru_RU.CP1251 locale: + zcat $CWD/glibc.ru_RU.CP1251.diff.gz | patch -p1 --verbose || exit 1 + # Don't use AM/PM format for date(1). That's just plain crazy. + zcat $CWD/glibc-2.32.en_US.no.am.pm.date.format.diff.gz | patch -p1 --verbose || exit 1 + # Other regression fixes from git: + for git_patch in $CWD/patches/*.patch.gz ; do + zcat $git_patch | patch -p1 --verbose || exit 1 + done +} + +# This is going to be the initial $DESTDIR: +export PKG=$TMP/package-glibc-incoming-tree +PGLIBC=$TMP/package-glibc +PSOLIBS=$TMP/package-aaa_glibc-solibs +PI18N=$TMP/package-glibc-i18n +PPROFILE=$TMP/package-glibc-profile +PDEBUG=$TMP/package-glibc-debug + +# Empty these locations first: +for dir in $PKG $PGLIBC $PSOLIBS $PZONE $PI18N $PPROFILE $PDEBUG ; do + if [ -d $dir ]; then + rm -rf $dir + fi + mkdir -p $dir +done +if [ -d $TMP/glibc-$VERSION ]; then + rm -rf $TMP/glibc-$VERSION +fi + +# Create an incoming directory structure for glibc to be built into: +mkdir -p $PKG/lib${LIBDIRSUFFIX} +mkdir -p $PKG/sbin +mkdir -p $PKG/usr/bin +mkdir -p $PKG/usr/lib${LIBDIRSUFFIX} +mkdir -p $PKG/usr/sbin +mkdir -p $PKG/usr/include +mkdir -p $PKG/usr/doc +mkdir -p $PKG/usr/man +mkdir -p $PKG/usr/share +mkdir -p $PKG/var/db/nscd +mkdir -p $PKG/var/run/nscd + +# Begin extract/compile: +cd $TMP +rm -rf glibc-$CVSVER +tar xvf $CWD/glibc-$CVSVER.tar.xz \ + || tar xvf $CWD/glibc-$CVSVER.tar.lz \ + || tar xvf $CWD/glibc-$CVSVER.tar.bz2 \ + || tar xvf $CWD/glibc-$CVSVER.tar.gz +cd glibc-$CVSVER + +# Apply patches; exit if any fail. +apply_patches +if [ ! $? = 0 ]; then + exit 1 +fi + +# Clean up leftover CVS directories: +find . -type d -name CVS -exec rm -r {} \+ 2> /dev/null + +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \+ -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \+ + +# Make build directory: +mkdir build-glibc-$VERSION +cd build-glibc-$VERSION || exit 1 + +echo "BUILDING DAS NPTL GLIBC" +# We are setting the variable below so that x86 ISA level is not included +# in shared libraries. Without this, glibc compiled with -march= may not +# run on some CPUs that it should be able to support. Needed for glibc-2.33. +# FIXME: revisit this with future glibc releases! +libc_cv_include_x86_isa_level=no \ +CFLAGS="-g $OPTIMIZ" \ +../configure \ + --prefix=/usr \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --enable-kernel=4.4 \ + --with-headers=/usr/include \ + --enable-add-ons \ + --enable-profile \ + $DISABLE_NSCD \ + $WERROR \ + --infodir=/usr/info \ + --mandir=/usr/man \ + --with-tls \ + --with-__thread \ + --without-cvs \ + $TARGET-slackware-linux + +make $NUMJOBS || exit 1 +make $NUMJOBS install install_root=$PKG || exit 1 +# Don't use this, as it makes the i18n package WAY bigger: +#make localedata/install-locale-files DESTDIR=$PKG || exit 1 +# This is ugly run in parallel, and seems to hang at the end. But it actually +# completes much faster. :) +make $NUMJOBS localedata/install-locales install_root=$PKG DESTDIR=$PKG || exit 1 + +# Build and install libxcrypt: +pushd $CWD +ARCH=$SLACKWARE_ARCH LIBDIRSUFFIX=$LIBDIRSUFFIX SLKCFLAGS=$OPTIMIZ ./libxcrypt.build +popd + +# We've always had an sln symlink in /bin, so let's make sure it +# remains there so as not to break any scripts that might need it: +mkdir -p $PKG/bin +( cd $PKG/bin ; ln -sf /sbin/sln sln ) + +# This bit was mostly copped from Fedora Rawhide's .spec file. I'm not +# entirely sure how important it is, since I'm not aware of anything +# we ship trying to link libpthread as static. What it does is make sure +# that anything linking libpthread static includes all of the functions +# so that the resulting binary doesn't rely on parts of the library that +# were not linked in. Optimizing actually working over binary size, so +# to speak. +( cd $PKG/usr/lib${LIBDIRSUFFIX} + gcc -r -nostdlib -o libpthread.o -Wl,--whole-archive ./libpthread.a + rm libpthread.a + ar rcs libpthread.a libpthread.o + rm libpthread.o +) + +# The prevailing standard seems to be putting unstripped libraries in +# /usr/lib/debug/ and stripping the debugging symbols from all the other +# libraries. +mkdir -p $PKG/usr/lib${LIBDIRSUFFIX}/debug +cp -a $PKG/lib${LIBDIRSUFFIX}/l*.so* $PKG/usr/lib${LIBDIRSUFFIX}/debug +cp -a $PKG/usr/lib${LIBDIRSUFFIX}/*.a $PKG/usr/lib${LIBDIRSUFFIX}/debug +# Don't need debug+profile: +( cd $PKG/usr/lib${LIBDIRSUFFIX}/debug ; rm -f *_p.* ) +# NOTE: Is there really a reason for the glibc-debug package? +# If you're debugging glibc, you can also compile it, right? + +## COMMENTED OUT: There's no reason for profile libs to include -g information. +## Put back unstripped profiling libraries: +#mv $PKG/usr/lib${LIBDIRSUFFIX}/debug/*_p.a $PKG/usr/lib${LIBDIRSUFFIX} +# It might be best to put the unstripped and profiling libraries in glibc-debug and glibc-profile. + +# I don't think "strip -g" causes the pthread problems. It's --strip-unneeded that does. +strip -g $PKG/lib${LIBDIRSUFFIX}/l*.so* +strip -g $PKG/usr/lib${LIBDIRSUFFIX}/l*.so* +strip -g $PKG/usr/lib${LIBDIRSUFFIX}/lib*.a + +# Remove the rquota.x and rquota.h include files, as they are provided by +# the quota package: +rm -f $PKG/usr/include/rpcsvc/rquota.{h,x} + +# Back to the sources dir to add some files/docs: +cd $TMP/glibc-$CVSVER + +# We'll automatically install the config file for the Name Server Cache Daemon. +# Perhaps this should also have some commented-out startup code in rc.inet2... +mkdir -p $PKG/etc +cat nscd/nscd.conf > $PKG/etc/nscd.conf.new + +# Install docs: +( mkdir -p $PKG/usr/doc/glibc-$VERSION + cp -a \ + CONTRIBUTED-BY* COPYING* INSTALL* LICENSES* MAINTAINERS* NEWS* README* SECURITY* SHARED-FILES* \ + $PKG/usr/doc/glibc-$VERSION +) + +# Trim the NEWS file to omit ancient history: +if [ -r NEWS ]; then + DOCSDIR=$(echo $PKG/usr/doc/glibc-$VERSION) + cat NEWS | head -n 1000 > $DOCSDIR/NEWS + touch -r NEWS $DOCSDIR/NEWS +fi + +# OK, there are some very old Linux standards that say that any binaries in a /bin or +# /sbin directory (and the directories themselves) should be group bin rather than +# group root, unless a specific group is really needed for some reason. +# +# I can't find any mention of this in more recent standards docs, and always thought +# that it was pretty cosmetic anyway (hey, if there's a reason -- fill me in!), so +# it's possible that this ownership change won't be followed in the near future +# (it's a PITA, and causes many bug reports when the perms change is occasionally +# forgotten). +# +# But, it's hard to get me to break old habits, so we'll continue the tradition here: +# +# No, no we won't. You know how we love to break traditions. + +# Strip most binaries: +( cd $PKG + find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-debug 2> /dev/null + find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip -g 2> /dev/null +) + +# Fix info dir: +rm $PKG/usr/info/dir +gzip -9 $PKG/usr/info/* + +# This is junk +rm $PKG/etc/ld.so.cache +( cd $PKG + find . -name "*.orig" -exec rm {} \+ +) + +################################## +# OK, time to make some packages # +################################## + +# glibc-profile: +cd $PPROFILE +mkdir -p usr/lib${LIBDIRSUFFIX} +# Might as well just grab these with 'mv' to simplify things later: +mv $PKG/usr/lib${LIBDIRSUFFIX}/lib*_p.a usr/lib${LIBDIRSUFFIX} +# Profile libs should be stripped. Use the debug libs to debug... +( cd usr/lib${LIBDIRSUFFIX} ; strip -g *.a ) +mkdir install +cp -a $CWD/slack-desc.glibc-profile install/slack-desc +makepkg -l y -c n $TMP/glibc-profile-$VERSION-$SLACKWARE_ARCH-$BUILD.txz + +# THIS IS NO LONGER PACKAGED (or is it? might be better to let it be made, and then ship it or not...) +# glibc-debug: +cd $PDEBUG +mkdir -p usr/lib${LIBDIRSUFFIX} +# Might as well just grab these with 'mv' to simplify things later: +mv $PKG/usr/lib${LIBDIRSUFFIX}/debug usr/lib${LIBDIRSUFFIX} +mkdir install +cp -a $CWD/slack-desc.glibc-debug install/slack-desc +## Don't package this: +#makepkg -l y -c n $TMP/glibc-debug-$VERSION-$SLACKWARE_ARCH-$BUILD.txz +## INSTEAD, NUKE THESE LIBS +#rm -rf $PKG/usr/lib${LIBDIRSUFFIX}/debug + +# glibc-i18n: +cd $PI18N +mkdir -p usr/lib${LIBDIRSUFFIX}/locale +mv $PKG/usr/lib${LIBDIRSUFFIX}/locale/* usr/lib${LIBDIRSUFFIX}/locale +mkdir -p usr/share/{i18n,locale} +mv $PKG/usr/share/i18n/* usr/share/i18n +mv $PKG/usr/share/locale/* usr/share/locale +# Leave copies of the C, POSIX, and en_US locales in the main glibc package: +cp -a usr/lib${LIBDIRSUFFIX}/locale/{C,en_US}* $PKG/usr/lib${LIBDIRSUFFIX}/locale +mkdir -p $PKG/usr/share/i18n/locales +cp -a usr/share/i18n/locales/{C,POSIX,en_US} $PKG/usr/share/i18n/locales +mkdir install +cp -a $CWD/slack-desc.glibc-i18n install/slack-desc +makepkg -l y -c n $TMP/glibc-i18n-$VERSION-$SLACKWARE_ARCH-$BUILD.txz + +# aaa_glibc-solibs: +cd $PSOLIBS +mkdir -p etc/profile.d +cp -a $CWD/profile.d/* etc/profile.d +chown -R root:root etc +chmod 755 etc/profile.d/* +mkdir -p lib${LIBDIRSUFFIX} +cp -a $PKG/lib${LIBDIRSUFFIX}/* lib${LIBDIRSUFFIX} +( cd lib${LIBDIRSUFFIX} + mkdir incoming + mv *so* incoming + mv incoming/libmemusage.so . + # Beginning with glibc-2.34, shared objects are using their ABI sonames + # directly, which is frankly, a terrible idea. It might help other package + # managers, but doesn't do us any favors where we already had a system for + # dealing with upgrades (and downgrades!). We'll change these libraries to + # use the versioned naming system of glibc-2.33 and earlier so that we don't + # have to handle these files differently and so that it's easy to see what + # version of glibc is in use at a glance. + cd incoming + # First do the new libxcrypt links (a little bit differently): + for cryptlib in libcrypt.so.* ; do + CRYPTSO=$(echo $cryptlib | cut -f 3 -d .) + mv $cryptlib libcrypt${CRYPTSO}-${VERSION}.so + done + for library in *.so.* ; do + mv $library $(echo $library | cut -f 1 -d .)-${VERSION}.so + done + # This one is a special case. We don't want an $ARCH embedded in the + # filename. It prevents using the same install scripts on all $ARCH + # and does no good since we'll never have multiple $ARCH libraries + # installed in the same directory anyway. So give it the previous name + # format: + mv ld-linux*-${VERSION}.so ld-${VERSION}.so +) +mkdir -p usr +cp -a $PKG/usr/bin usr +mv usr/bin/ldd . +rm usr/bin/* +mv ldd usr/bin +mkdir -p usr/lib${LIBDIRSUFFIX} +# The gconv directory has a lot of stuff, but including it here will save some problems. +# Seems standard elsewhere. +cp -a $PKG/usr/lib${LIBDIRSUFFIX}/gconv usr/lib${LIBDIRSUFFIX} +mkdir -p usr/libexec +cp -a $PKG/usr/libexec/pt_chown usr/libexec +# Same usr.bin deal: +cp -a $PKG/sbin . +mv sbin/ldconfig . +rm sbin/* +mv ldconfig sbin +mkdir install +cp -a $CWD/slack-desc.aaa_glibc-solibs install/slack-desc +cp -a $CWD/doinst.sh-aaa_glibc-solibs install/doinst.sh +# Fix specific versioning for the symlink creation script. This part of the +# script would only be used in the case where there is no ldconfig on the +# running system that's used to install the package. That should never be the +# case, but we'll leave the code in place anyway just in case. +sed -i "s/@@VERSION@@/$VERSION/g" install/doinst.sh +# Call the function to fix doinst.sh where $LIBDIRSUFFIX is needed: +fix_doinst +# Only scrub the links in /lib{,64} that will be created by ldconfig: +find lib${LIBDIRSUFFIX} -type l -exec rm {} \+ +# Build the package: +makepkg -l y -c n $TMP/aaa_glibc-solibs-$VERSION-$SLACKWARE_ARCH-$BUILD.txz + +# And finally, the complete "all-in-one" glibc package is created +# from whatever was leftover: +cd $PGLIBC +mv $PKG/* . +mkdir -p etc/profile.d +cp -a $CWD/profile.d/* etc/profile.d +chown -R root:root etc +chmod 755 etc/profile.d/* +# Only scrub the links in /lib{,64} that will be created by ldconfig: +find lib${LIBDIRSUFFIX} -type l -exec rm {} \+ +mkdir install +cp -a $CWD/slack-desc.glibc install/slack-desc +cp -a $CWD/doinst.sh-glibc install/doinst.sh +# Call the function to fix doinst.sh where $LIBDIRSUFFIX is needed: +fix_doinst +( cd lib${LIBDIRSUFFIX} + mkdir incoming + mv *so* incoming + mv incoming/libmemusage.so . + #mv incoming/libcrypt* . + # Beginning with glibc-2.34, shared objects are using their ABI sonames + # directly, which is frankly, a terrible idea. It might help other package + # managers, but doesn't do us any favors where we already had a system for + # dealing with upgrades (and downgrades!). We'll change these libraries to + # use the versioned naming system of glibc-2.33 and earlier so that we don't + # have to handle these files differently and so that it's easy to see what + # version of glibc is in use at a glance. + cd incoming + # First do the new libxcrypt links (a little bit differently): + for cryptlib in libcrypt.so.* ; do + CRYPTSO=$(echo $cryptlib | cut -f 3 -d .) + mv $cryptlib libcrypt${CRYPTSO}-${VERSION}.so + done + for library in *.so.* ; do + mv $library $(echo $library | cut -f 1 -d .)-${VERSION}.so + done + # This one is a special case. We don't want an $ARCH embedded in the + # filename. It prevents using the same install scripts on all $ARCH + # and does no good since we'll never have multiple $ARCH libraries + # installed in the same directory anyway. So give it the previous name + # format: + mv ld-linux*-${VERSION}.so ld-${VERSION}.so +) +# Build the package: +/sbin/makepkg -l y -c n $TMP/glibc-$VERSION-$SLACKWARE_ARCH-$BUILD.txz + +# Done! +echo +echo "glibc packages built in $TMP!" |