7 files changed, 283 insertions, 0 deletions
diff --git a/source/n/vsftpd/doinst.sh b/source/n/vsftpd/doinst.sh
new file mode 100644
index 000000000..f915774f4
--- /dev/null
+++ b/source/n/vsftpd/doinst.sh
@@ -0,0 +1,15 @@
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+config etc/vsftpd.conf.new
+config etc/logrotate.d/vsftpd.new
+rm -f etc/logrotate.d/vsftpd.new
+
diff --git a/source/n/vsftpd/slack-desc b/source/n/vsftpd/slack-desc
new file mode 100644
index 000000000..82b9f521e
--- /dev/null
+++ b/source/n/vsftpd/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+      |-----handy-ruler------------------------------------------------------|
+vsftpd: vsftpd (Very Secure FTP Daemon)
+vsftpd:
+vsftpd: vsftpd is an FTP server, or daemon. The 'vs' stands for Very Secure.
+vsftpd: Obviously this is not a guarantee, but a reflection that the entire
+vsftpd: codebase was written with security in mind, and carefully designed to
+vsftpd: be resilient to attack (as well as extremely fast and scalable).
+vsftpd:
+vsftpd: The vsftpd homepage is http://vsftpd.beasts.org/
+vsftpd:
+vsftpd: The Very Secure FTP Daemon was written by Chris Evans.
+vsftpd:
diff --git a/source/n/vsftpd/vsftpd.SlackBuild b/source/n/vsftpd/vsftpd.SlackBuild
new file mode 100755
index 000000000..c202e392d
--- /dev/null
+++ b/source/n/vsftpd/vsftpd.SlackBuild
@@ -0,0 +1,94 @@
+#!/bin/sh
+
+# Copyright 2008, 2009  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+VERSION=2.1.2
+ARCH=${ARCH:-x86_64}
+NUMJOBS=${NUMJOBS:-" -j7 "}
+BUILD=${BUILD:-1}
+
+if [ "$ARCH" = "x86_64" ]; then
+  LIBDIRSUFFIX="64"
+else
+  LIBDIRSUFFIX=""
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-vsftpd
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP || exit 1
+rm -rf vsftpd-$VERSION
+tar xvf $CWD/vsftpd-$VERSION.tar.?z* || exit 1
+cd vsftpd-$VERSION || exit 1
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+# This allows the libfinder script to find stuff in */lib64
+if [ "$LIBDIRSUFFIX" = "64" ]; then
+  zcat $CWD/vsftpd.vsf_findlibs.sh.diff.gz | patch -p1 --verbose || exit 1
+fi
+
+zcat $CWD/vsftpd.builddefs.diff.gz | patch -p1 --verbose || exit 1
+zcat $CWD/vsftpd.conf.diff.gz | patch -p1 --verbose || exit 1
+
+sed -i -e "s#lib/#lib${LIBDIRSUFFIX}/#g" vsf_findlibs.sh
+
+make $NUMJOBS || make || exit 1
+
+mkdir -p $PKG/usr/sbin
+cp vsftpd $PKG/usr/sbin
+chmod 755 $PKG/usr/sbin/vsftpd
+strip --strip-unneeded $PKG/usr/sbin/vsftpd
+
+mkdir -p $PKG/usr/man/man{5,8}
+cat vsftpd.conf.5 | gzip -9c > $PKG/usr/man/man5/vsftpd.conf.5.gz
+cat vsftpd.8 | gzip -9c > $PKG/usr/man/man8/vsftpd.8.gz
+
+mkdir -p $PKG/etc
+cat vsftpd.conf > $PKG/etc/vsftpd.conf.new
+
+mkdir -p $PKG/etc/logrotate.d
+zcat $CWD/vsftpd.log.gz > $PKG/etc/logrotate.d/vsftpd.new
+
+mkdir -p $PKG/usr/share/empty
+mkdir -p $PKG/home/ftp
+
+mkdir -p $PKG/usr/doc/vsftpd-$VERSION
+cp -a \
+  AUDIT BENCHMARKS BUGS COPYING* COPYRIGHT Changelog EXAMPLE FAQ \
+  INSTALL LICENSE README* REFS REWARD SECURITY SIZE SPEED TODO TUNING \
+  $PKG/usr/doc/vsftpd-$VERSION
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/vsftpd-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/n/vsftpd/vsftpd.builddefs.diff b/source/n/vsftpd/vsftpd.builddefs.diff
new file mode 100644
index 000000000..ea9081391
--- /dev/null
+++ b/source/n/vsftpd/vsftpd.builddefs.diff
@@ -0,0 +1,15 @@
+--- ./builddefs.h.orig	2004-07-02 07:36:59.000000000 -0700
++++ ./builddefs.h	2004-09-03 11:25:13.000000000 -0700
+@@ -1,9 +1,9 @@
+ #ifndef VSF_BUILDDEFS_H
+ #define VSF_BUILDDEFS_H
+ 
+-#undef VSF_BUILD_TCPWRAPPERS
+-#define VSF_BUILD_PAM
+-#undef VSF_BUILD_SSL
++#define VSF_BUILD_TCPWRAPPERS
++#undef VSF_BUILD_PAM
++#define VSF_BUILD_SSL
+ 
+ #endif /* VSF_BUILDDEFS_H */
+ 
diff --git a/source/n/vsftpd/vsftpd.conf.diff b/source/n/vsftpd/vsftpd.conf.diff
new file mode 100644
index 000000000..230d858c8
--- /dev/null
+++ b/source/n/vsftpd/vsftpd.conf.diff
@@ -0,0 +1,48 @@
+--- ./vsftpd.conf.orig	2008-12-17 14:31:40.000000000 -0600
++++ ./vsftpd.conf	2009-03-29 22:09:21.000000000 -0500
+@@ -19,7 +19,7 @@
+ #
+ # Default umask for local users is 077. You may wish to change this to 022,
+ # if your users expect that (022 is used by most other ftpd's)
+-#local_umask=022
++local_umask=022
+ #
+ # Uncomment this to allow the anonymous FTP user to upload files. This only
+ # has an effect if the above global write enable is activated. Also, you will
+@@ -48,11 +48,11 @@
+ #
+ # You may override where the log file goes if you like. The default is shown
+ # below.
+-#xferlog_file=/var/log/vsftpd.log
++xferlog_file=/var/log/vsftpd.log
+ #
+ # If you want, you can have your log file in standard ftpd xferlog format.
+ # Note that the default log file location is /var/log/xferlog in this case.
+-#xferlog_std_format=YES
++xferlog_std_format=YES
+ #
+ # You may change the default value for timing out an idle session.
+ #idle_session_timeout=600
+@@ -100,14 +100,17 @@
+ # default to avoid remote users being able to cause excessive I/O on large
+ # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
+ # the presence of the "-R" option, so there is a strong case for enabling it.
+-#ls_recurse_enable=YES
++ls_recurse_enable=YES
+ #
+-# When "listen" directive is enabled, vsftpd runs in standalone mode and
+-# listens on IPv4 sockets. This directive cannot be used in conjunction
+-# with the listen_ipv6 directive.
+-listen=YES
++# When "listen" directive is enabled, vsftpd runs in standalone mode (rather
++# than from inetd) and listens on IPv4 sockets. To use vsftpd in standalone
++# mode rather than with inetd, either change the line below to 'listen=YES'
++# or comment it out. This directive cannot be used in conjunction with the
++# listen_ipv6 directive.
++listen=NO
+ #
+ # This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6
+ # sockets, you must run two copies of vsftpd whith two configuration files.
+ # Make sure, that one of the listen options is commented !!
+ #listen_ipv6=YES
++
diff --git a/source/n/vsftpd/vsftpd.log b/source/n/vsftpd/vsftpd.log
new file mode 100644
index 000000000..d338de811
--- /dev/null
+++ b/source/n/vsftpd/vsftpd.log
@@ -0,0 +1,5 @@
+/var/log/vsftpd.log {
+    # ftpd doesn't handle SIGHUP properly
+    nocompress
+    missingok
+}
diff --git a/source/n/vsftpd/vsftpd.vsf_findlibs.sh.diff b/source/n/vsftpd/vsftpd.vsf_findlibs.sh.diff
new file mode 100644
index 000000000..147ee7426
--- /dev/null
+++ b/source/n/vsftpd/vsftpd.vsf_findlibs.sh.diff
@@ -0,0 +1,87 @@
+diff -Nur vsftpd-2.1.2.orig/vsf_findlibs.sh vsftpd-2.1.2/vsf_findlibs.sh
+--- vsftpd-2.1.2.orig/vsf_findlibs.sh	2009-05-21 15:43:11.000000000 -0500
++++ vsftpd-2.1.2/vsf_findlibs.sh	2009-05-31 00:41:38.308704816 -0500
+@@ -6,61 +6,61 @@
+ 
+ if find_func hosts_access tcpwrap.o; then
+   echo "-lwrap";
+-  locate_library /lib/libnsl.so && echo "-lnsl";
++  locate_library /lib64/libnsl.so && echo "-lnsl";
+ fi
+ 
+ # Look for PAM (done weirdly due to distribution bugs (e.g. Debian) or the
+ # crypt library.
+ if find_func pam_start sysdeputil.o; then
+-  locate_library /lib/libpam.so.0 && echo "/lib/libpam.so.0";
+-  locate_library /usr/lib/libpam.so && echo "-lpam";
++  locate_library /lib64/libpam.so.0 && echo "/lib64/libpam.so.0";
++  locate_library /usr/lib64/libpam.so && echo "-lpam";
+   # HP-UX ends shared libraries with .sl
+-  locate_library /usr/lib/libpam.sl && echo "-lpam";
++  locate_library /usr/lib64/libpam.sl && echo "-lpam";
+   # AIX ends shared libraries with .a
+-  locate_library /usr/lib/libpam.a && echo "-lpam";
++  locate_library /usr/lib64/libpam.a && echo "-lpam";
+ else
+-  locate_library /lib/libcrypt.so && echo "-lcrypt";
+-  locate_library /usr/lib/libcrypt.so && echo "-lcrypt";
++  locate_library /lib64/libcrypt.so && echo "-lcrypt";
++  locate_library /usr/lib64/libcrypt.so && echo "-lcrypt";
+ fi
+ 
+ # Look for the dynamic linker library. Needed by older RedHat when
+ # you link in PAM
+-locate_library /lib/libdl.so && echo "-ldl";
++locate_library /lib64/libdl.so && echo "-ldl";
+ 
+ # Look for libsocket. Solaris needs this.
+-locate_library /lib/libsocket.so && echo "-lsocket";
++locate_library /lib64/libsocket.so && echo "-lsocket";
+ 
+ # Look for libnsl. Solaris needs this.
+-locate_library /lib/libnsl.so && echo "-lnsl";
++locate_library /lib64/libnsl.so && echo "-lnsl";
+ 
+ # Look for libresolv. Solaris needs this.
+-locate_library /lib/libresolv.so && echo "-lresolv";
++locate_library /lib64/libresolv.so && echo "-lresolv";
+ 
+ # Look for libutil. Older FreeBSD need this for setproctitle().
+-locate_library /usr/lib/libutil.so && echo "-lutil";
++locate_library /usr/lib64/libutil.so && echo "-lutil";
+ 
+ # For older HP-UX...
+-locate_library /usr/lib/libsec.sl && echo "-lsec";
++locate_library /usr/lib64/libsec.sl && echo "-lsec";
+ 
+ # Look for libcap (capabilities)
+-if locate_library /lib/libcap.so.1; then
+-  echo "/lib/libcap.so.1";
+-elif locate_library /lib/libcap.so.2; then
+-  echo "/lib/libcap.so.2";
++if locate_library /lib64/libcap.so.1; then
++  echo "/lib64/libcap.so.1";
++elif locate_library /lib64/libcap.so.2; then
++  echo "/lib64/libcap.so.2";
+ else
+-  locate_library /usr/lib/libcap.so && echo "-lcap";
+-  locate_library /lib/libcap.so && echo "-lcap";
++  locate_library /usr/lib64/libcap.so && echo "-lcap";
++  locate_library /lib64/libcap.so && echo "-lcap";
+ fi
+ 
+ # Solaris needs this for nanosleep()..
+-locate_library /lib/libposix4.so && echo "-lposix4";
+-locate_library /usr/lib/libposix4.so && echo "-lposix4";
++locate_library /lib64/libposix4.so && echo "-lposix4";
++locate_library /usr/lib64/libposix4.so && echo "-lposix4";
+ 
+ # Tru64 (nanosleep)
+ locate_library /usr/shlib/librt.so && echo "-lrt";
+ 
+ # Solaris sendfile
+-locate_library /usr/lib/libsendfile.so && echo "-lsendfile";
++locate_library /usr/lib64/libsendfile.so && echo "-lsendfile";
+ 
+ # OpenSSL
+ if find_func SSL_library_init ssl.o; then