3 files changed, 196 insertions, 0 deletions
diff --git a/source/n/libtirpc/doinst.sh b/source/n/libtirpc/doinst.sh
new file mode 100644
index 000000000..409cfbe78
--- /dev/null
+++ b/source/n/libtirpc/doinst.sh
@@ -0,0 +1,13 @@
+#!/bin/sh
+config() {
+  NEW="$1"
+  OLD="`dirname $NEW`/`basename $NEW .new`"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+config etc/netconfig.new
diff --git a/source/n/libtirpc/libtirpc.SlackBuild b/source/n/libtirpc/libtirpc.SlackBuild
new file mode 100755
index 000000000..997dd8137
--- /dev/null
+++ b/source/n/libtirpc/libtirpc.SlackBuild
@@ -0,0 +1,164 @@
+#!/bin/sh
+
+# Copyright 2015  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+# Thanks to Jan Rafaj for contributing the original reference script.
+# Remark: - The GSS support (for secure RPC) is currently not built, as it
+# Remark:   requires Kerberos 5 libraries. If you need it, install
+# Remark:   Kerberos 5, remove '--disable-gssapi' from the configure flags
+# Remark:   below and rebuild.
+
+PKGNAM=libtirpc
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-2}
+
+# To build with GSS support (requires Kerberos 5 libraries), pass any value
+# other than "NO" in the environment, or edit the line below:
+WITH_GSS=${WITH_GSS:-NO}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$(uname -m)" in
+    i?86) ARCH=i586 ;;
+    arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7hl ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *) ARCH=$(uname -m) ;;
+  esac
+  export ARCH
+fi
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+if [ "$ARCH" = "i386" ]; then
+  SLKCFLAGS="-O2 -march=i386 -mcpu=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O3 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+# Set proper GSS option:
+if [ "$WITH_GSS" = "NO" ]; then
+  GSSAPI="--disable-gssapi"
+else
+  GSSAPI="--enable-gssapi"
+fi
+
+# Configure:
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --sysconfdir=/etc \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --mandir=/usr/man \
+  --disable-static \
+  $GSSAPI \
+  --build=$ARCH-slackware-linux
+
+# Build and install:
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Make etc/netconfig file a .new:
+mv $PKG/etc/netconfig $PKG/etc/netconfig.new
+
+# Move library to /lib${LIBDIRSUFFIX} as it might be needed to mount /usr:
+mkdir $PKG/lib${LIBDIRSUFFIX}
+( cd $PKG/usr/lib${LIBDIRSUFFIX}
+  for file in lib*.so.?.* ; do
+    mv $file ../../lib${LIBDIRSUFFIX}
+    ln -sf ../../lib${LIBDIRSUFFIX}/$file .
+  done
+  cp -a lib*.so.? ../../lib${LIBDIRSUFFIX}
+)
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Add a documentation directory:
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS COPYING* NEWS README* THANKS TODO \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# Don't use .3t man page suffix:
+if [ -d $PKG/usr/man/man3 ]; then
+  ( cd $PKG/usr/man/man3
+    for file in *.3t ; do
+      mv $file $(basename $file .3t).3
+    done
+  )
+fi
+
+# Compress manual pages:
+find $PKG/usr/man -type f -exec gzip -9 {} \;
+for i in $( find $PKG/usr/man -type l ) ; do
+  ln -s $( readlink $i ).gz $i.gz
+  rm $i
+done
+
+mkdir -p $PKG/install
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/n/libtirpc/slack-desc b/source/n/libtirpc/slack-desc
new file mode 100644
index 000000000..426c79175
--- /dev/null
+++ b/source/n/libtirpc/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+        |-----handy-ruler------------------------------------------------------|
+libtirpc: libtirpc (Transport-Independent RPC library)
+libtirpc:
+libtirpc: Libtirpc is a port of Sun's Transport-Independent RPC library to
+libtirpc: Linux.  It is being developed by Bull GNU/Linux NFSv4 project.
+libtirpc:
+libtirpc: You will need this library if you plan to use RPC with a GLIBC
+libtirpc: version newer than 2.13, because the RPC stack has been removed
+libtirpc: from GLIBC versions newer than 2.13.  The library is required
+libtirpc: by the 'rpcbind' package.
+libtirpc:
+libtirpc: http://sourceforge.net/projects/libtirpc/