diff options
Diffstat (limited to '')
-rwxr-xr-x | source/n/krb5/krb5.SlackBuild | 221 |
1 files changed, 221 insertions, 0 deletions
diff --git a/source/n/krb5/krb5.SlackBuild b/source/n/krb5/krb5.SlackBuild new file mode 100755 index 000000000..05b5f7213 --- /dev/null +++ b/source/n/krb5/krb5.SlackBuild @@ -0,0 +1,221 @@ +#!/bin/sh + +# Copyright 2009 Tom Canich, State College, Pennsylvania, USA +# Copyright 2015-2017 Willy Sudiarto Raharjo <willysr@slackbuilds.org> +# Copyright 2017, 2018, 2019, 2020 Patrick J. Volkerding, Sebeka, MN, USA +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +cd $(dirname $0) ; CWD=$(pwd) + +PKGNAM=krb5 +VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)} +BUILD=${BUILD:-1} + +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) ARCH=i586 ;; + arm*) ARCH=arm ;; + *) ARCH=$( uname -m ) ;; + esac +fi + +NUMJOBS=${NUMJOBS:-" -j7 "} + +TMP=${TMP:-/tmp} +PKG=$TMP/package-$PKGNAM + +if [ "$ARCH" = "i586" ]; then + SLKCFLAGS="-O2 -march=i586 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "i686" ]; then + SLKCFLAGS="-O2 -march=i686 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + +# If the variable PRINT_PACKAGE_NAME is set, then this script will report what +# the name of the created package would be, and then exit. This information +# could be useful to other scripts. +if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then + echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz" + exit 0 +fi + +rm -rf $PKG +mkdir -p $TMP $PKG +cd $TMP +rm -rf $PKGNAM-$VERSION +tar xvf $CWD/$PKGNAM-$VERSION.tar.?z || exit 1 +cd $PKGNAM-$VERSION || exit 1 + +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \+ -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \+ + +sed -i "/KRB5ROOT=/s/\/local//" src/util/ac_check_krb5.m4 + +# Not listed in ./configure --help, does this actually do anything? +# --with-pam +# NOTE: It appears that the krb5-1.12.1-pam.patch.gz patch introduces this +# option, which would then pamify ksu. We'll not worry about it now. + +## NOTE: I'm not applying any of these until it's shown that we actually need +## to hack up krb5 this much. Initially we'll ship without any of them, and +## if all goes well the plan is to drop them from the source directory and +## this script. If it turns out some or all of them are needed, we'll look +## into it when the time comes. As always, input from those who know more about +## it than I do is always welcomed. +## Add some patches from Fedora (via Phantom X) for compatibility: +#zcat $CWD/patches/krb5-1.12.1-pam.patch.gz | patch -p1 --verbose || exit 1 +## Below patch fails without selinux: +##zcat $CWD/patches/krb5-1.15-beta1-selinux-label.patch.gz | patch -p1 --verbose || exit 1 +#zcat $CWD/patches/krb5-1.12-ksu-path.patch.gz | patch -p1 --verbose || exit 1 +#zcat $CWD/patches/krb5-1.12-ktany.patch.gz | patch -p1 --verbose || exit 1 +#zcat $CWD/patches/krb5-1.15-beta1-buildconf.patch.gz | patch -p1 --verbose || exit 1 +#zcat $CWD/patches/krb5-1.3.1-dns.patch.gz | patch -p1 --verbose || exit 1 +#zcat $CWD/patches/krb5-1.12-api.patch.gz | patch -p1 --verbose || exit 1 +#zcat $CWD/patches/krb5-1.13-dirsrv-accountlock.patch.gz | patch -p1 --verbose || exit 1 +#zcat $CWD/patches/krb5-1.9-debuginfo.patch.gz | patch -p1 --verbose || exit 1 +## Below patch fails without selinux patch: +##zcat $CWD/patches/krb5-1.11-run_user_0.patch.gz | patch -p1 --verbose || exit 1 +#zcat $CWD/patches/krb5-1.11-kpasswdtest.patch.gz | patch -p1 --verbose || exit 1 +#zcat $CWD/patches/Build-with-Werror-implicit-int-where-supported.patch.gz | patch -p1 --verbose || exit 1 + +cd src + +CFLAGS="$SLKCFLAGS" \ +CXXFLAGS="$SLKCFLAGS" \ +CPPFLAGS+=" -I/usr/include/et" \ +./configure \ + --prefix=/usr \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --sysconfdir=/etc \ + --localstatedir=/var/kerberos \ + --runstatedir=/var/run \ + --mandir=/usr/man \ + --enable-dns-for-realm \ + --with-ldap \ + --with-system-et \ + --with-system-ss \ + --enable-pkinit \ + --with-tls-impl=openssl \ + --with-system-verto=no \ + --with-prng-alg=os \ + --build=$ARCH-slackware-linux || exit 1 + +# Build: +make $NUMJOBS || make || exit 1 + +# Double check for proper runstatedir setting: +if ! grep -q /var/run/krb5kdc include/osconf.h ; then + echo "FATAL: runstatedir not set properly: $(grep KDC_RUN_DIR include/osconf.h)" + exit 1 +fi + +# Install: +make install DESTDIR=$PKG || exit 1 + +# Don't ship .la files: +rm -f $PKG/{,usr/}lib${LIBDIRSUFFIX}/*.la + +# Fix perms on shared objects: +find $PKG/usr/lib${LIBDIRSUFFIX} -name "*.so*" -exec chmod 755 "{}" \+ + +# Install init scripts: +mkdir -p $PKG/etc/rc.d +cp -a $CWD/conf/rc.kadmind $PKG/etc/rc.d/rc.kadmind.new +cp -a $CWD/conf/rc.kpropd $PKG/etc/rc.d/rc.kpropd.new +cp -a $CWD/conf/rc.krb5kdc $PKG/etc/rc.d/rc.krb5kdc.new +chown root:root $PKG/etc/rc.d/* +chmod 644 $PKG/etc/rc.d/* + +# Install default options: +mkdir -p $PKG/etc/default +cp -a $CWD/conf/kadmind $PKG/etc/default/kadmind.new +cp -a $CWD/conf/kpropd $PKG/etc/default/kpropd.new +cp -a $CWD/conf/krb5kdc $PKG/etc/default/krb5kdc.new +chown root:root $PKG/etc/default/* +chmod 644 $PKG/etc/default/* + +# Install example config files: +mkdir -p $PKG/etc +cp -a $CWD/conf/krb5.conf.example $PKG/etc/krb5.conf.example +chown root:root $PKG/etc/krb5.conf.example +chmod 644 $PKG/etc/krb5.conf.example +mkdir -p /var/kerberos/krb5kdc +cp -a $CWD/conf/kdc.conf.example $PKG/var/kerberos/krb5kdc/kdc.conf.example +chown root:root $PKG/var/kerberos/krb5kdc/kdc.conf.example +chmod 644 $PKG/var/kerberos/krb5kdc/kdc.conf.example + +# Move examples to the documentation directory: +mkdir -p $PKG/usr/doc/${PKGNAM}-${VERSION}/examples +mv $PKG/usr/share/examples/krb5/* $PKG/usr/doc/${PKGNAM}-${VERSION}/examples +rmdir $PKG/usr/share/examples/krb5 $PKG/usr/share/examples 2> /dev/null + +# Move some libraries to $PKG/lib${LIBDIRSUFFIX}: +mkdir -p $PKG/lib${LIBDIRSUFFIX} +( cd $PKG/usr/lib${LIBDIRSUFFIX} + for lib in libgssapi_krb5 libkrb5 libk5crypto libkrb5support ; do + mv ${lib}.so.?.* ../../lib${LIBDIRSUFFIX} + ln -sf ../../lib${LIBDIRSUFFIX}/${lib}.so.?.* . + cp -a ${lib}.so.? ../../lib${LIBDIRSUFFIX} + done +) + +find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \ + | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true + +rm -rf $PKG/usr/man/cat{1,5,8} + +# Compress and link manpages, if any: +if [ -d $PKG/usr/man ]; then + ( cd $PKG/usr/man + for manpagedir in $(find . -type d -name "man*") ; do + ( cd $manpagedir + for eachpage in $( find . -type l -maxdepth 1 | grep -v '\.gz$') ; do + ln -s $( readlink $eachpage ).gz $eachpage.gz + rm $eachpage + done + gzip -9 *.? + ) + done + ) +fi + +# krb5 ships with a ton of docs, but for now we'll just include these: +mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION + cp -a \ + ../NOTICE* ../README* \ + $PKG/usr/doc/$PKGNAM-$VERSION + +mkdir -p $PKG/install +zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh +cat $CWD/slack-desc > $PKG/install/slack-desc + +cd $PKG +/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz |