summaryrefslogtreecommitdiffstats
path: root/source/n/dhcpcd/dhcpcd.SlackBuild
diff options
context:
space:
mode:
Diffstat (limited to 'source/n/dhcpcd/dhcpcd.SlackBuild')
-rwxr-xr-xsource/n/dhcpcd/dhcpcd.SlackBuild101
1 files changed, 51 insertions, 50 deletions
diff --git a/source/n/dhcpcd/dhcpcd.SlackBuild b/source/n/dhcpcd/dhcpcd.SlackBuild
index 409118746..3ee95a902 100755
--- a/source/n/dhcpcd/dhcpcd.SlackBuild
+++ b/source/n/dhcpcd/dhcpcd.SlackBuild
@@ -1,6 +1,6 @@
#!/bin/sh
-# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA
# All rights reserved.
#
# Redistribution and use of this script, with or without modification, is
@@ -21,27 +21,44 @@
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-VERSION=${VERSION:-3.2.3}
-ARCH=${ARCH:-x86_64}
+VERSION=${VERSION:-$(echo dhcpcd-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
BUILD=${BUILD:-1}
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+ case "$( uname -m )" in
+ i?86) export ARCH=i486 ;;
+ arm*) export ARCH=arm ;;
+ # Unless $ARCH is already set, use uname -m for all other archs:
+ *) export ARCH=$( uname -m ) ;;
+ esac
+fi
+
CWD=$(pwd)
TMP=${TMP:-/tmp}
PKG=$TMP/package-dhcpcd
if [ "$ARCH" = "i486" ]; then
SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+ LIBDIRSUFFIX=""
elif [ "$ARCH" = "s390" ]; then
SLKCFLAGS="-O2"
+ LIBDIRSUFFIX=""
elif [ "$ARCH" = "x86_64" ]; then
SLKCFLAGS="-O2 -fPIC"
+ LIBDIRSUFFIX="64"
+else
+ SLKCFLAGS="-O2"
+ LIBDIRSUFFIX=""
fi
rm -rf $PKG
mkdir -p $TMP $PKG
cd $TMP
rm -rf dhcpcd-$VERSION
-tar xvf $CWD/dhcpcd-$VERSION.tar.bz2 || exit 1
+tar xvf $CWD/dhcpcd-$VERSION.tar.?z* || exit 1
cd dhcpcd-$VERSION
chown -R root:root .
find . \
@@ -50,65 +67,49 @@ find . \
\( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
-exec chmod 644 {} \;
-# This changes the default locations where *.pid and other files are
-# written - instead of various locations, use /etc/dhcpc
-# The latter directory was long traditional, and (more importantly)
-# you can't be sure that /var is mounted yet when dhcpcd is invoked.
-zcat $CWD/patches/config.h.diff.gz | patch -p1 || exit 1
-
-# Fixup the sample dhcpcd.sh script to reflect our changes
-zcat $CWD/patches/dhcpcd.sh.diff.gz | patch -p1 || exit 1
+# At this point, it should be safe to assume that /var will be mounted by the
+# time dhcpcd is called, as all non-root local filesystems are mounted from
+# /etc/rc.d/rc.S, and /var should not be on a network filesystem. As such,
+# we'll use the FHS layout instead of putting things in /etc/dhcpc
-# Fix a typo in the manpage
-zcat $CWD/patches/dhcpcd.8.in.diff.gz | patch -p1 || exit 1
-
-# Disable zeroconf support
-# I'm not sure if this is necessary, to be honest. If we do this though,
-# I think we'll want to edit the man page to remove references to it.
-#sed -i 's%#define ENABLE_IPV4LL%#undef ENABLE_IPV4LL%' config.h
-
-# Fix segfaulting on x86_64. Apparently i?86 is more forgiving
-#zcat $CWD/dhcpcd.vararg.diff.gz | patch -p1 --verbose || exit 1
+# Fixup the 50-ntp.conf hook with our init script location
+zcat $CWD/50-ntp.conf.diff.gz | patch -p1 || exit 1
+# Yes, /lib/dhcpcd is correct, even on x86_64.
CFLAGS="$SLKCFLAGS" \
- make INFODIR=/etc/dhcpc || exit 1
-
-# We'll install this manually, as the only thing "make install" actually
-# installs is the executable and the man page, and the man page goes to
-# the wrong place :-)
-mkdir -p $PKG/sbin
-cp -a dhcpcd $PKG/sbin
-
-mkdir -p $PKG/usr/man/man8
-gzip -9c dhcpcd.8 > $PKG/usr/man/man8/dhcpcd.8.gz
-
-# This script (or its equivalent) has been installed non-executable for
-# several dhcpcd releases leading me to believe this is intentional on the
-# part of the developers. Indeed, the script is called a "sample" in the
-# included comments, and there's been at least one security issue related
-# to its use in the past, so it's probably a safer bet to not install it so
-# that it works "out of the box". However, making it non-executable is not
-# the best solution for this as it leads to error messages in the system
-# logs which I hear about from time to time. Instead, we'll make it
-# executable, but will give it a suffix of -sample so that dhcpcd won't
-# attempt to run it unless the admin specifically configure it to do so.
-# As far as I can tell it does nothing more than add some extra verbosity
-# to the logs anyway, and rc.inet1 already does that. There's really no
-# need that I can see to enable the script.
-mkdir -p $PKG/etc/dhcpc
-cp -a dhcpcd.sh $PKG/etc/dhcpc/dhcpcd.sh-sample
-chmod 755 $PKG/etc/dhcpc/dhcpcd.sh-sample
+./configure \
+ --prefix=/usr \
+ --libdir=/usr/lib${LIBDIRSUFFIX} \
+ --sbindir=/sbin \
+ --sysconfdir=/etc \
+ --dbdir=/var/lib/dhcpcd \
+ --libexecdir=/lib/dhcpcd \
+ --mandir=/usr/man \
+ --with-hooks="50-ntp.conf 50-yp.conf" \
+ --build=$ARCH-slackware-linux
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG HOOKSCRIPTS="50-ntp.conf 50-yp.conf" || exit 1
find $PKG | xargs file | grep -e "executable" -e "shared object" \
| grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+# Let's not clobber the config file
+mv $PKG/etc/dhcpcd.conf $PKG/etc/dhcpcd.conf.new
+
+# Compress manpages
+( cd $PKG/usr/man
+ find . -type f -exec gzip -9 {} \;
+ for i in $(find . -type l) ; do ln -s $(readlink $i).gz $i.gz ; rm $i ; done
+)
+
mkdir -p $PKG/usr/doc/dhcpcd-$VERSION
cp -a README $PKG/usr/doc/dhcpcd-$VERSION
zcat $CWD/COPYRIGHT.gz > $PKG/usr/doc/dhcpcd-$VERSION/COPYRIGHT
mkdir -p $PKG/install
cat $CWD/slack-desc > $PKG/install/slack-desc
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
cd $PKG
/sbin/makepkg -l y -c n $TMP/dhcpcd-$VERSION-$ARCH-$BUILD.txz
-