5 files changed, 142 insertions, 2 deletions
diff --git a/source/l/gst-plugins-bad-free/fetch-sources.sh b/source/l/gst-plugins-bad-free/fetch-sources.sh
index e9a7e2ca7..b483197d2 100755
--- a/source/l/gst-plugins-bad-free/fetch-sources.sh
+++ b/source/l/gst-plugins-bad-free/fetch-sources.sh
@@ -26,7 +26,7 @@
 #
 # Example:  VERSION=1.18.5 ./fetch-sources.sh
 
-VERSION=${VERSION:-1.22.4}
+VERSION=${VERSION:-1.22.5}
 
 rm -rf rm -rf gst-plugins-bad-free-$VERSION gst-plugins-bad-$VERSION
 
diff --git a/source/l/gst-plugins-bad-free/gst-plugins-bad-free.SlackBuild b/source/l/gst-plugins-bad-free/gst-plugins-bad-free.SlackBuild
index f6e40311b..17d9735ba 100755
--- a/source/l/gst-plugins-bad-free/gst-plugins-bad-free.SlackBuild
+++ b/source/l/gst-plugins-bad-free/gst-plugins-bad-free.SlackBuild
@@ -27,7 +27,7 @@ cd $(dirname $0) ; CWD=$(pwd)
 
 PKGNAM=gst-plugins-bad-free
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-2}
+BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
diff --git a/source/l/libptytty/libptytty.SlackBuild b/source/l/libptytty/libptytty.SlackBuild
new file mode 100755
index 000000000..a2dbd3966
--- /dev/null
+++ b/source/l/libptytty/libptytty.SlackBuild
@@ -0,0 +1,120 @@
+#!/bin/bash
+
+# Copyright 2023  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=libptytty
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$(uname -m)" in
+    i?86) ARCH=i586 ;;
+    arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7hl ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *) ARCH=$(uname -m) ;;
+  esac
+  export ARCH
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+NUMJOBS=${NUMJOBS:-" -j $(expr $(nproc) + 1) "}
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O3 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \+ -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \+
+
+# Configure, build, and install:
+mkdir cmake-build
+cd cmake-build
+  cmake \
+    -DCMAKE_C_FLAGS="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS="$SLKCFLAGS" \
+    -DCMAKE_INSTALL_PREFIX=/usr \
+    -DCMAKE_INSTALL_MANDIR=/usr/man \
+    -DLIB_SUFFIX="$LIBDIRSUFFIX" \
+    -DBUILD_SHARED_LIBS=ON \
+    .. || exit 1
+  make $NUMJOBS || make || exit 1
+  make install DESTDIR=$PKG || exit 1
+cd ..
+
+# Compress manual pages:
+find $PKG/usr/man -type f -exec gzip -9 {} \+
+for i in $( find $PKG/usr/man -type l ) ; do
+  ln -s $( readlink $i ).gz $i.gz
+  rm $i
+done
+
+# Add a documentation directory:
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  Changes* COPYING* README* \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/l/libptytty/libptytty.url b/source/l/libptytty/libptytty.url
new file mode 100644
index 000000000..b67dc9f0d
--- /dev/null
+++ b/source/l/libptytty/libptytty.url
@@ -0,0 +1 @@
+http://dist.schmorp.de/libptytty/
diff --git a/source/l/libptytty/slack-desc b/source/l/libptytty/slack-desc
new file mode 100644
index 000000000..a372fcd8f
--- /dev/null
+++ b/source/l/libptytty/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+         |-----handy-ruler------------------------------------------------------|
+libptytty: libptytty (pty/tty and utmp/wtmp/lastlog library)
+libptytty:
+libptytty: Libptytty is a small library that offers pseudo-tty management in an
+libptytty: OS-independent way. It was created out of frustration over the many
+libptytty: differences of pty/tty handling in different operating systems for the
+libptytty: use inside "rxvt-unicode".
+libptytty:
+libptytty: In addition to offering mere pty/tty management, it also offers session
+libptytty: database support (utmp and optional wtmp/lastlog updates for login
+libptytty: shells).
+libptytty: