summaryrefslogtreecommitdiffstats
path: root/source/k/packaging-x86_64/kernel-modules/rc.modules.new
diff options
context:
space:
mode:
Diffstat (limited to 'source/k/packaging-x86_64/kernel-modules/rc.modules.new')
-rwxr-xr-xsource/k/packaging-x86_64/kernel-modules/rc.modules.new924
1 files changed, 924 insertions, 0 deletions
diff --git a/source/k/packaging-x86_64/kernel-modules/rc.modules.new b/source/k/packaging-x86_64/kernel-modules/rc.modules.new
new file mode 100755
index 000000000..cb1fbec69
--- /dev/null
+++ b/source/k/packaging-x86_64/kernel-modules/rc.modules.new
@@ -0,0 +1,924 @@
+#!/bin/sh
+# rc.modules 12.3456789 Sun May 10 05:31:26 UTC 2009 pp (rb), pjv, rlw
+#
+# This file loads extra drivers into the Linux kernel.
+#
+# The modules will be looked for under /lib/modules/<kernel version number>
+# On systems using udev, this file should remain mostly commented out.
+# Nearly all hardware device modules will be loaded automatically on such
+# systems. This file should only be used when udev is not loading a module
+# that you require, or if you are not using udev (which is going to become
+# increasingly impossible...), or if you want to force a particular module
+# to be loaded where alternatives exist.
+#
+# Many Linux kernel modules will accept extra options. The Linux kernel
+# source is the best place to look for extra documentation for the various
+# modules. This can be found under /usr/src/linux/Documentation if you've
+# the installed the kernel sources.
+#
+# NOTE: This may not be a complete list of modules. If you don't see what
+# you're looking for, look around in /lib/modules/2.x.x/ for an appropriate
+# module. Also, if any problems arise loading or using these modules, try
+# compiling and installing a custom kernel that contains the support instead.
+# That always works. ;^)
+
+# Determine the version of the running kernel:
+RELEASE=$(uname -r)
+
+### Update module dependencies ###
+# If /usr is mounted and we have 'find', we can try to take a shortcut:
+if [ -x /usr/bin/find -a -e /lib/modules/$RELEASE/modules.dep \
+ -a /lib/modules/$RELEASE/modules.dep -nt /etc/modules.conf ]; then
+ NEWMODS="$(/usr/bin/find /lib/modules/$RELEASE -mindepth 2 -type f -newer /lib/modules/$RELEASE/modules.dep)"
+ # Only rebuild dependencies if new module(s) are found:
+ if [ ! "" = "$NEWMODS" ]; then
+ echo "Updating module dependencies for Linux $RELEASE:"
+ /sbin/depmod -a
+ else
+ echo "Module dependencies up to date (no new kernel modules found)."
+ fi
+else # we don't have find, or there is no existing modules.dep, or it is out of date.
+ echo "Updating module dependencies for Linux $RELEASE:"
+ /sbin/depmod -A
+fi
+
+### Mouse support:
+# PS/2 mouse support:
+# The default in Slackware is to use proto=imps because that works with the
+# most types of mice out of the box. For example, using proto=any will
+# completely break the mouse if you change consoles with several models of KVM
+# switches.
+#
+# This is commented out here because a better place to configure the options
+# for the psmouse module is in /etc/modprobe.d/psmouse.
+#
+#/sbin/modprobe psmouse proto=imps
+#
+# Serial (RS-232, COM port) mouse support:
+#/sbin/modprobe sermouse
+#
+# Microsoft/ATI XL busmouse support:
+# Microsoft busmouse (also called Inport mice) is connected to an
+# expansion board using a round connector with 9 pins. Be aware that
+# several vendors talk about 'Microsoft busmouse' and actually mean
+# PS/2 busmouse -- so count the pins on the connector. This driver
+# also supports the ATIXL mouse, a rare mouse that is connected to the
+# back of an ATI video card:
+#/sbin/modprobe inport
+#
+# Logitech mouse connected to a proprietary interface card. It's
+# generally a round connector with 9 pins. Note that the newer mice
+# made by Logitech don't use the Logitech protocol anymore; for those,
+# you don't need this module:
+#/sbin/modprobe logibm
+#
+# IBM PC110 palmtop digitizer pad:
+#/sbin/modprobe pc110pad
+
+#### ACPI support ###
+# Advanced Configuration and Power Interface (ACPI) support for Linux
+# requires an ACPI compliant platform (hardware/firmware), and assumes
+# the presence of OS-directed configuration and power management (OSPM)
+# software. Linux ACPI provides a robust functional replacement for
+# several legacy configuration and power management interfaces, including
+# the Plug-and-Play BIOS specification (PnP BIOS), the MultiProcessor
+# Specification (MPS), and the Advanced Power Management (APM)
+# specification. If both ACPI and APM support are configured, whichever
+# is loaded first shall be used. Also note that in many cases udev will
+# load the required modules if ACPI is found to be active.
+# ACPI can be disabled with the "noacpi" boot option.
+# Also note that ACPI is blacklisted with our default kernel
+# configurations on machines with a BIOS older than 2001-01-01. If you
+# still want to try it, you'll need to use the "acpi=force" boot option.
+#
+# AC Adapter (indicates whether a system is on AC, or not):
+#/sbin/modprobe ac
+#
+# Battery (adds battery information through/proc/acpi/battery):
+#/sbin/modprobe battery
+#
+# Button (handles events on the power, sleep and lid buttons):
+#/sbin/modprobe button
+#
+# Video. This driver implements the ACPI Extensions For Display Adapters
+# for integrated graphics devices on motherboard, as specified in ACPI 2.0
+# Specification, Appendix B, allowing some basic control like defining the
+# video POST device, retrieving EDID information, or to setup a video output.
+# Note that this is an reference implementation only, and it may or may not
+# work for your integrated video device.
+#/sbin/modprobe video
+#
+# Fan (adds support for ACPI fan control and status):
+#/sbin/modprobe fan
+#
+# Dock (adds support for ACPI controlled docking stations):
+#/sbin/modprobe dock
+#
+# Bay (adds support for ACPI controlled removable drive bays such as the
+# IBM UltraBay or the Dell Module Bay):
+#/sbin/modprobe bay
+#
+# Processor. This driver installs ACPI as the idle handler for Linux, and
+# uses ACPI C2 and C3 processor states to save power, on systems that
+# support it. It is required by several flavors of cpufreq Performance-
+# state drivers.
+#/sbin/modprobe processor
+#
+# Thermal. This driver adds support for ACPI thermal zones. Most mobile and
+# some desktop systems support ACPI thermal zones. It is HIGHLY recommended
+# that this option be enabled, as your processor(s) may be damaged without it.
+#/sbin/modprobe thermal
+#
+# Memory. This driver adds support for ACPI Memory Hotplug. This driver
+# provides support for fielding notifications on ACPI memory devices
+# (PNP0C80) which represent memory ranges that may be onlined or offlined
+# during runtime. Enabling this driver assumes that your platform hardware
+# and firmware have support for hot-plugging physical memory. If your
+# system does not support physically adding or ripping out memory DIMMs at
+# some platform defined granularity (individually or as a bank) at runtime,
+# then you need not enable this driver.
+#/sbin/modprobe memory
+#
+# Container (EXPERIMENTAL -- allows _physical_ insertion and removal of CPUs
+# and memory on machines that support it):
+#/sbin/modprobe container
+#
+# ASUS/Medion Laptop Extras. This driver provides support for extra features
+# of ACPI-compatible ASUS laptops. As some of Medion laptops are made by
+# ASUS, it may also support some Medion laptops (such as 9675 for example).
+# It makes all the extra buttons generate standard ACPI events that go through
+# /proc/acpi/events, and (on some models) adds support for changing the
+# display brightness and output, switching the LCD backlight on and off, and,
+# most importantly, allows you to blink those fancy LEDs intended for
+# reporting mail and wireless status. All settings are changed via
+# /proc/acpi/asus directory entries. Owner and group for these entries can be
+# set with asus_uid and asus_gid module parameters.
+# More information and a userspace daemon for handling the extra buttons:
+# http://sourceforge.net/projects/acpi4asus/
+#/sbin/modprobe asus_acpi
+#
+# ThinkPad ACPI Laptop Extras. This is a driver for the IBM and Lenovo
+# ThinkPad laptops. It adds support for Fn-Fx key combinations, Bluetooth
+# control, video output switching, ThinkLight control, UltraBay eject and
+# more. For more information about this driver see:
+# Documentation/thinkpad-acpi.txt and http://ibm-acpi.sf.net/
+#/sbin/modprobe thinkpad_acpi
+#
+# Toshiba Laptop Extras. This driver adds support for access to certain
+# system settings on "legacy free" Toshiba laptops. These laptops can be
+# recognized by their lack of a BIOS setup menu and APM support. On these
+# machines, all system configuration is handled through the ACPI. This
+# driver is required for access to controls not covered by the general ACPI
+# drivers, such as LCD brightness and video output. Configuration is
+# accessed by reading and writing text files in the /proc tree. Furthermore,
+# no power management functions are exposed, as those are handled by the
+# general ACPI drivers.
+# More information about this driver is available at:
+# http://memebeam.org/toys/ToshibaAcpiDriver
+#/sbin/modprobe toshiba_acpi
+#
+#
+# See also the ACPI CPU frequency scaling driver in the "CPU frequency
+# scaling modules" section below.
+
+#### APM support ###
+# APM is a BIOS specification for saving power using several different
+# techniques. This is mostly useful for battery powered laptops.
+# If a kernel supports ACPI it will always be built in, not a module.
+# APM is considered obsolete on newer hardware -- most things have ACPI.
+#/sbin/modprobe apm
+
+# Enable PC speaker support:
+#/sbin/modprobe pcspkr
+
+### Built-in PC parallel port support ###
+# Generic setup example. Attempt to load by default, since it usually
+# won't hurt. Some (most?) people may want to comment the line below
+# and look into better functioning and performing hardware specific
+# options as described later on in this section.
+#
+/sbin/modprobe -q parport_pc 2> /dev/null
+# Hardware specific setup example (PLIP requires an IRQ, and the
+# ECP protocol requires a DMA channel)
+# This may also give better performance in general.
+#/sbin/modprobe parport_pc io=0x378 irq=7 dma=1
+
+### PCI parallel/serial card support:
+# If your serial/parallel ports are on a PCI card, uncomment the
+# line below and comment the section above that loads parport_pc.
+#/sbin/modprobe parport_serial
+
+### Parallel printer support ###
+# This should be safe to try to load by default.
+/sbin/modprobe -q lp 2> /dev/null
+
+### Parallel port IP ###
+#/sbin/modprobe plip
+
+### Filesystem Quota support ###
+if /bin/grep -q quota /etc/fstab ; then
+ # /sbin/modprobe quota_v1
+ /sbin/modprobe quota_v2
+fi
+
+### AGP (Accelerated Graphics Port) GART support ###
+# This module takes care of programming the GART (part of your motherboard's
+# chipset that handles gathering data from memory and passing it to the
+# card) and enables faster AGP transfers. The AGP GART module is required
+# to use AGP features of your 3D rendering video card. You'll need this to
+# with most cards (nVidia's official drivers that include their own GART
+# support being a notable exception) to use X11's direct rendering support.
+/sbin/modprobe agpgart 2> /dev/null
+
+### non-IDE CD-ROM drive support ###
+# These modules add CD-ROM drive support. Most of these drivers will probe
+# for the I/O address and IRQ of the drive automatically if the parameters
+# to configure them are omitted. Typically the I/O address will be specified
+# in hexadecimal, e.g.: cm206=0x300,11
+#
+# ***NONE*** of these drivers are for use with IDE/ATAPI CD-ROM drives. That
+# support is already built into every pre-compiled Slackware Linux kernel.
+# Also, note that all of the manufacturers listed below stopped making these
+# types of wacky-interface drives years ago and all make IDE/ATAPI-interface
+# CD-ROM drives now. So, just because your drive says "Mitsumi" on it is not
+# reason enough to think you need the special Mitsumi module loaded, etc. If
+# you got your drive within the last couple of years it's probably IDE. Try
+# tossing a disc in the drive and mounting it on the various IDE interfaces it
+# could be using, like /dev/hdc.
+#
+#/sbin/modprobe aztcd aztcd=<I/O address>
+#/sbin/modprobe cdu31a cdu31a_port=<I/O address> cdu31a_irq=<interrupt>
+#/sbin/modprobe cm206 cm206=<I/O address>,<IRQ>
+#/sbin/modprobe gscd gscd=<I/O address>
+#/sbin/modprobe mcdx mcdx=<I/O address>,<IRQ>
+#/sbin/modprobe optcd optcd=<I/O address>
+# Below, this last number is "1" for SoundBlaster Pro card, or "0" for a clone.
+#/sbin/modprobe sbpcd sbpcd=<I/O address>,1
+#/sbin/modprobe sjcd sjcd=<I/O address>
+#/sbin/modprobe sonycd535 sonycd535=<I/O address>
+
+# CD-ROM drives on ISP16, MAD16 or Mozart sound card:
+#/sbin/modprobe isp16 isp16_cdrom_base=<port> isp16_cdrom_irq=<irq> isp16_cdrom_dma=<dma> isp16_cdrom_type=<drive_type>
+# where the values are one of: port=0x340,0x320,0x330,0x360
+# irq=0,3,5,7,9,10,11
+# dma=0,3,5,6,7
+# drive_type=noisp16,Sanyo,Panasonic,Sony,Mitsumi
+
+### Cyclades multiport serial card support ###
+#/sbin/modprobe cyclades
+
+#### Serial line IP support (SLIP/CSLIP/PPP) ###
+## This module is for SLIP/CSLIP support:
+#/sbin/modprobe slip
+
+## Load PPP:
+# This module is for PPP support:
+#/sbin/modprobe ppp_generic
+# This PPP plugin supports PPP over serial lines:
+#/sbin/modprobe ppp_async
+# Use this plugin instead for HDLC (used for high-speed leased lines like T1/E1)
+#/sbin/modprobe ppp_synctty
+
+## This module provides compression for PPP (optional):
+##/sbin/modprobe ppp_deflate
+
+### USB Host Controllers:
+# Enhanced Host Controller Interface (USB 2.0)
+#/sbin/modprobe ehci-hcd
+# Open Host Controller Interface (Compaq/Microsoft/National standard):
+#/sbin/modprobe ohci-hcd
+# Universal Host Controller Interface (Intel/Via standard):
+#/sbin/modprobe uhci-hcd
+# ISP1160/ISP1161 USB Host Controllers
+#/sbin/modprobe isp116x-hcd
+# SL811HS USB Host Controller
+#/sbin/modprobe sl811-hcd
+# SL811HS PCMCIA/CF USB Host Controller
+#/sbin/modprobe sl811_cs
+
+### USB device support:
+# (Note that once you've loaded USB hub support most USB devices will
+# trigger the kernel to load their modules automatically)
+# USB "Human Interface Device" driver; handles most USB mice, joysticks,
+# gamepads, steering wheels, keyboards, trackballs and digitizers.
+#/sbin/modprobe usbhid
+# Simple HIDBP USB mouse driver, if hid doesn't work:
+#/sbin/modprobe usbmouse
+# Simple HIDBP USB keyboard driver, if hid doesn't work:
+#/sbin/modprobe usbkbd
+# Wacom Graphire and Intuos tablet driver:
+#/sbin/modprobe wacom
+# Logitech WingMan Force joystick:
+#/sbin/modprobe iforce
+# USB audio:
+#/sbin/modprobe audio
+# USB modem support:
+#/sbin/modprobe cdc-acm
+# USB serial converter:
+#/sbin/modprobe usbserial
+# USB printer support:
+#/sbin/modprobe usblp
+# IBM "C-It" USB video camera:
+#/sbin/modprobe ibmcam framerate=1
+# USB OV511 Camera support:
+#/sbin/modprobe ov511
+# USB ADMtek Pegasus-based ethernet device support:
+#/sbin/modprobe pegasus
+# Kawasaki USB ethernet controller support:
+#/sbin/modprobe kaweth
+# USB Mustek MDC800 Digital Camera Support:
+#/sbin/modprobe mdc800
+# USB Mass Storage support:
+#/sbin/modprobe usb-storage
+# USS720 parallel-port driver:
+#/sbin/modprobe uss720
+# Prolific PL-2302 USB-to-USB network device:
+#/sbin/modprobe plusb
+# USB Diamond Rio500 support:
+#/sbin/modprobe rio500
+# D-Link DSB-R100 FM radio support:
+#/sbin/modprobe dsbr100
+# USB Bluetooth support:
+#/sbin/modprobe bluetooth
+
+### USB event drivers:
+# Mouse input:
+#/sbin/modprobe mousedev
+# Joystick input:
+#/sbin/modprobe joydev
+# Generic event reporting device:
+#/sbin/modprobe evdev
+
+### ALSA (Advanced Linux Sound Architecture) support:
+# Sound Blaster Pro/16 support:
+#/sbin/modprobe snd-sb16 port=0x220 irq=5 dma8=3 dma16=5 mpu_port=0x300
+# Sound Blaster Live support:
+#/sbin/modprobe snd-emu10k1
+# AD1816(A) sound driver:
+#/sbin/modprobe snd-ad1816a port=0x530 irq=5 dma1=1 dma2=3
+# Crystal CS4232 based (PnP) cards:
+#/sbin/modprobe snd-cs4232
+# ES1370 (Ensoniq AudioPCI ES1370) support. This is for some Creative
+# Labs Sound Blaster PCI64/128 (that use the ES1370 chipset), and
+# Ensoniq AudioPCI-97:
+#/sbin/modprobe snd-ens1370
+# ES1371 (Ensoniq AudioPCI ES1371/73) support. This is for some Creative
+# Labs Sound Blaster PCI64/128 (that use the ES1371/73 chipset), Ectiva
+# EV1938, Vibra PCI128, and Ensoniq AudioPCI ES1371/73:
+#/sbin/modprobe snd-ens1371
+# ESS Maestro, Maestro2, Maestro2E:
+#/sbin/modprobe snd-es1968
+# ESS Maestro3/Allegro:
+#/sbin/modprobe snd-maestro3
+# VIA VT82xx Audio Controller
+#/sbin/modprobe snd-via82xx
+# (For information on configuring other sound cards with Linux,
+# see the documentation in /usr/src/linux/Documentation/sound/,
+# and /usr/src/linux/Documentation/Configure.help.
+
+### Joystick support ###
+# The core joystick input support module, needed by all of the
+# joystick devices below:
+#/sbin/modprobe joydev
+### Next, you must load a module for your gameport.
+# Classic ISA/PnP gameports:
+#/sbin/modprobe ns558
+# SoundBlaster Live! gameports:
+#/sbin/modprobe emu10k1-gp
+# Many soundcards had their gameport support bundled in sound drivers
+### Drivers for various joystick devices ###
+# Analog joysticks and gamepads:
+#/sbin/modprobe analog
+# Assassin 3D and MadCatz Panther devices:
+#/sbin/modprobe a3d
+# Logitech ADI digital joysticks and gamepads:
+#/sbin/modprobe adi
+# Creative Labs Blaster Cobra gamepad:
+#/sbin/modprobe cobra
+# Genius Flight2000 Digital joysticks and gamepads:
+#/sbin/modprobe gf2k
+# Gravis GrIP joysticks and gamepads:
+#/sbin/modprobe grip
+# InterAct digital joysticks and gamepads:
+#/sbin/modprobe interact
+# ThrustMaster DirectConnect joysticks and gamepads:
+#/sbin/modprobe tmdc
+# Microsoft SideWinder digital joysticks and gamepads:
+#/sbin/modprobe sidewinder
+### Serial port game controller support ###
+# Both of these are needed for serial-port game controllers:
+#/sbin/modprobe serio
+#/sbin/modprobe serport
+# Logitech WingMan Warrior joystick:
+#/sbin/modprobe warrior
+# LogiCad3d Magellan/SpaceMouse 6dof controller:
+#/sbin/modprobe magellan
+# SpaceTec SpaceOrb/Avenger 6dof controller:
+#/sbin/modprobe spaceorb
+# SpaceTec SpaceBall 4000 FLX 6dof controller:
+#/sbin/modprobe spaceball
+# Gravis Stinger gamepad:
+#/sbin/modprobe stinger
+# I-Force joysticks/wheels:
+#/sbin/modprobe iforce
+### Parallel port connected controllers ###
+# Multisystem, Sega Genesis, Saturn joysticks and gamepads:
+#/sbin/modprobe db9
+# Multisystem, NES, SNES, N64, PSX joysticks and gamepads:
+#/sbin/modprobe gamecon
+# Multisystem joysticks via TurboGraFX device:
+#/sbin/modprobe turbografx
+
+### Appletalk support ###
+# This is needed if you want to run netatalk, a package which allows
+# you to use you Linux box as a file and print server for Apple Macintosh
+# computers on your local network.
+#/sbin/modprobe appletalk
+
+### IPX networking support ###
+#/sbin/modprobe ipx
+
+### IDE device support ###
+# IDE CD-ROM drives:
+#/sbin/modprobe ide-cd
+# IDE hard drives:
+#/sbin/modprobe ide-disk
+# IDE floppy drives:
+#/sbin/modprobe ide-floppy
+# IDE tape drives:
+#/sbin/modprobe ide-tape
+
+### Network device support ###
+# Most of these drivers will probe automatically for the card if you don't
+# specify an I/O address and IRQ.
+#
+# First, if setup probing found a network card, there may be an 'rc.netdevice'
+# file that we should run to load the network module:
+if [ -x /etc/rc.d/rc.netdevice ]; then
+ . /etc/rc.d/rc.netdevice
+fi
+
+### Ethernet cards based on the 8390 chip.
+# 3com 3c503 support:
+#/sbin/modprobe 3c503
+# Ansel Communications EISA 3200 support:
+#/sbin/modprobe ac3200
+# Cabletron E21xx support:
+#/sbin/modprobe e2100
+# HP PCLAN+ (27247B and 27252A) support:
+#/sbin/modprobe hp-plus
+# HP PCLAN (27245 and other 27xxx series) support:
+#/sbin/modprobe hp
+# NE2000/NE1000 support (non PCI):
+#/sbin/modprobe ne io=0x300 # NE2000 at 0x300
+#/sbin/modprobe ne io=0x280 # NE2000 at 0x280
+#/sbin/modprobe ne io=0x320 # NE2000 at 0x320
+#/sbin/modprobe ne io=0x340 # NE2000 at 0x340
+#/sbin/modprobe ne io=0x360 # NE2000 at 0x360
+# PCI NE2000 clone support:
+#/sbin/modprobe ne2k-pci
+# SMC Ultra support:
+#/sbin/modprobe smc-ultra
+# SMC Ultra32 EISA support:
+#/sbin/modprobe smc-ultra32
+# Western Digital WD80*3 (and clones) support:
+#/sbin/modprobe wd
+#
+# Other network hardware drivers:
+#
+# 3com 3c501 (consider buying a new card, since the 3c501 is slow,
+# broken, and obsolete):
+#/sbin/modprobe 3c501
+# 3com 3c503:
+#/sbin/modprobe 3c503
+# 3com 3c505:
+#/sbin/modprobe 3c505
+# 3com 3c507:
+#/sbin/modprobe 3c507
+# 3com 3c509 and 3c579:
+#/sbin/modprobe 3c509
+# 3com 3c515:
+#/sbin/modprobe 3c515
+# This one works for all 3com 3c590/3c592/3c595/3c597 and the
+# EtherLink XL 3c900 and 3c905 cards:
+#/sbin/modprobe 3c59x
+# Apricot Xen-II on board Ethernet:
+#/sbin/modprobe apricot
+# Generic ARCnet support:
+#/sbin/modprobe arcnet
+# AT1700/1720 & Fujitsu FMV-181/182/183/184 support:
+#/sbin/modprobe at1700
+# AT-LAN-TEC/RealTek pocket adapter support:
+#/sbin/modprobe atp
+# BPQ Ethernet driver:
+#/sbin/modprobe bpqether
+# Generic DECchip & DIGITAL EtherWORKS PCI/EISA:
+#/sbin/modprobe de4x5
+# D-Link DE600 pocket adapter support:
+#/sbin/modprobe de600
+# D-Link DE620 pocket adapter support:
+#/sbin/modprobe de620
+# DEPCA support:
+#/sbin/modprobe depca
+# Digi International RightSwitch cards:
+#/sbin/modprobe dgrs
+# Intel EtherExpress Pro support:
+#/sbin/modprobe eepro
+# Intel EtherExpress PRO/100 PCI support:
+#/sbin/modprobe eepro100
+# Intel EtherExpress16 support:
+#/sbin/modprobe eexpress
+# SMC EtherPower II 9432 PCI support:
+#/sbin/modprobe epic100
+# ICL EtherTeam 16i/32 support:
+#/sbin/modprobe eth16i
+# DEC EtherWorks 3 support:
+#/sbin/modprobe ewrk3
+# HP 10/100VG PCLAN (ISA, EISA, PCI) support:
+#/sbin/modprobe hp100
+# IBM Tropic chipset based adapter support:
+#/sbin/modprobe ibmtr
+# AMD LANCE and PCnet (AT1500 and NE2100) support:
+#/sbin/modprobe lance
+# National Semiconductor DP8381x series PCI Ethernet support:
+#/sbin/modprobe natsemi
+# NI5210 support:
+#/sbin/modprobe ni52
+# NI6510 support:
+#/sbin/modprobe ni65
+# AMD PCnet32 (VLB and PCI) support:
+#/sbin/modprobe pcnet32
+# Red Creek Hardware Virtual Private Network (VPN) support:
+#/sbin/modprobe rcpci
+# RealTek 8129/8139 (not 8019/8029!) support:
+#/sbin/modprobe 8139too
+# RealTek 8139C+ enhanced support:
+#/sbin/modprobe 8139cp
+# Sangoma S502A FRAD support:
+#/sbin/modprobe sdla
+# SMC 9194 support:
+#/sbin/modprobe smc9194
+# TI ThunderLAN support:
+#/sbin/modprobe tlan
+# DECchip Tulip (dc21x4x) PCI support:
+#/sbin/modprobe tulip
+# VIA Rhine support:
+#/sbin/modprobe via-rhine
+# AT&T WaveLAN & DEC RoamAbout DS support:
+#/sbin/modprobe wavelan
+# Packet Engines Yellowfin Gigabit-NIC support:
+#/sbin/modprobe yellowfin
+# Davicom DM9xxx (9102/9132/9100/9802...)
+#/sbin/modprobe dmfe
+# SiS 900/7016 PCI Fast Ethernet
+#/sbin/modprobe sis900
+
+### Serial line load balancing support ###
+#/sbin/modprobe eql
+
+### "dummy" IP support ###
+# A dummy IP driver. Essentially a loopback device. Can be useful --
+# see the Network Administrator's Guide from sunsite.unc.edu:/pub/Linux/docs/LDP
+#/sbin/modprobe dummy
+
+### ISDN kernel support ###
+#/sbin/modprobe isdn
+# ISDN loop (provides a virtual ISDN card for testing):
+#/sbin/modprobe isdnloop
+
+### ISDN interface support ###
+# AVM-B1 with CAPI2.0 driver (requires additional firmware; see
+# /usr/src/linux/Documentation/isdn/README.avmb1):
+#/sbin/modprobe capidrv
+# HiSax SiemensChipSet driver (supports AVM A1, Elsa ISDN cards,
+# Teles S0-16.0, Teles S0-16.3, Teles S0-8, Teles/Creatix PnP,
+# ITK micro ix1 and many compatibles):
+#/sbin/modprobe hisax
+# IBM Active 2000 ISDN card support (requires additional firmware; see
+# /usr/src/linux/Documentation/isdn/README.act2000 for more information)
+#/sbin/modprobe act2000
+# ICN active ISDN card driver:
+#/sbin/modprobe icn
+# PCBIT-D driver (requires additional firmware; see
+# /usr/src/linux/Documentation/isdn/README.pcbit for more information)
+#/sbin/modprobe pcbit
+# Spellcaster BRI ISDN driver:
+#/sbin/modprobe sc
+
+### Binary format support ###
+#/sbin/modprobe binfmt_aout
+#/sbin/modprobe binfmt_elf
+#/sbin/modprobe binfmt_java
+#/sbin/modprobe binfmt_misc
+
+### Filesystem support ###
+#/sbin/modprobe adfs
+#/sbin/modprobe affs
+#/sbin/modprobe autofs4
+#/sbin/modprobe coda
+#/sbin/modprobe cramfs
+#/sbin/modprobe exportfs
+#/sbin/modprobe ext2
+#/sbin/modprobe ext3
+#/sbin/modprobe fat
+#/sbin/modprobe fuse
+#/sbin/modprobe hfs
+#/sbin/modprobe hfsplus
+#/sbin/modprobe hpfs
+#/sbin/modprobe intermezzo
+#/sbin/modprobe isofs
+#/sbin/modprobe jfs
+#/sbin/modprobe minix
+#/sbin/modprobe msdos
+#/sbin/modprobe ncpfs
+#/sbin/modprobe nfs
+#/sbin/modprobe ntfs
+#/sbin/modprobe ocfs2
+#/sbin/modprobe qnx4
+#/sbin/modprobe reiserfs
+#/sbin/modprobe relayfs
+#/sbin/modprobe romfs
+#/sbin/modprobe smbfs
+#/sbin/modprobe sysfs
+#/sbin/modprobe sysv
+#/sbin/modprobe tmpfs
+#/sbin/modprobe udf
+#/sbin/modprobe ufs
+#/sbin/modprobe umsdos
+#/sbin/modprobe usbfs
+#/sbin/modprobe vfat
+#/sbin/modprobe xfs
+
+### RAID (Multiple Devices) support ###
+#/sbin/modprobe linear
+#/sbin/modprobe raid0
+#/sbin/modprobe raid1
+#/sbin/modprobe raid5
+
+# Note: this *IS NOT* needed to burn discs with 2.6.x or newer kernels.
+#
+# SCSI emulation support. This will provide SCSI host adapter emulation
+# for IDE ATAPI devices, and will allow you to use a SCSI device driver
+# instead of a native ATAPI driver. This is useful if you have an ATAPI
+# device for which no native driver has been written (for example, an ATAPI
+# PD-CD, CD-RW, or DVD-RW drive); you can then use this emulation together
+# with an # appropriate SCSI device driver. Note that this option does not
+# allow you to attach SCSI devices to a box that doesn't have a SCSI host
+# adapter installed. :-) Also, you'll need to tell the ide-scsi module
+# which device is your burner so that the normal ATAPI driver won't grab it
+# first. This is done by passing a flag to the kernel at boot time.
+# If you're using LILO, add this: append="hdc=ide-scsi"
+# Replace "hdc" with the appropriate device name.
+#
+#/sbin/modprobe ide-scsi
+
+### SCSI kernel support:
+#/sbin/modprobe scsi_mod
+#/sbin/modprobe scsi_syms
+#/sbin/modprobe sd_mod
+#/sbin/modprobe sg
+#/sbin/modprobe sr_mod
+#/sbin/modprobe st
+
+### SCSI controller support:
+# NCR53c7xx SCSI support:
+#/sbin/modprobe 53c7xx
+# BusLogic MultiMaster and FlashPoint SCSI support:
+#/sbin/modprobe BusLogic
+# NCR53c406a SCSI support:
+#/sbin/modprobe NCR53c406a
+# Initio INI-A100U2W SCSI support:
+#/sbin/modprobe a100u2w
+# AdvanSys SCSI support:
+#/sbin/modprobe advansys
+# Adaptec AHA152X/2825 support:
+#/sbin/modprobe aha152x
+# Adaptec AHA1542 support:
+#/sbin/modprobe aha1542
+# Adaptec AHA1740 support:
+#/sbin/modprobe aha1740
+# This is support for the various aic7xxx based Adaptec SCSI
+# controllers. These include the 274x EISA cards; 284x VLB cards;
+# 2902, 2910, 293x, 294x, 394x, 3985 and several other PCI and
+# motherboard based SCSI controllers from Adaptec:
+#/sbin/modprobe aic7xxx
+# ACARD 870U/W SCSI support:
+#/sbin/modprobe atp870u
+# DTC 3180/3280 SCSI support:
+#/sbin/modprobe dtc
+# EATA ISA/EISA/PCI (DPT and generic EATA/DMA-compliant boards) support:
+#/sbin/modprobe eata
+# EATA-PIO (old DPT PM2001, PM2012A) support:
+#/sbin/modprobe eata_pio
+# Future Domain 16xx SCSI/AHA-2920A support:
+#/sbin/modprobe fdomain
+# Generic NCR5380/53c400 SCSI support:
+#/sbin/modprobe g_NCR5380
+# GDT SCSI Disk Array Controller support:
+#/sbin/modprobe gdth
+# IOMEGA parallel port (imm - newer drives like ZipPlus):
+#/sbin/modprobe imm
+# Always IN2000 SCSI support:
+#/sbin/modprobe in2000
+# Initio 91XXU(W) SCSI support:
+#/sbin/modprobe initio
+# LSI Logic MegaRAID support (new driver):
+#/sbin/modprobe megaraid_mbox
+# LSI Logic MegaRAID support (legacy driver):
+#/sbin/modprobe megaraid
+# NCR53C8XX SCSI support:
+#/sbin/modprobe sym53c8xx
+# PAS16 SCSI support:
+#/sbin/modprobe pas16
+# IOMEGA parallel port (ppa - older parallel Zip drives):
+#/sbin/modprobe ppa
+# PSI240i support:
+#/sbin/modprobe psi240i
+# Qlogic FastSCSI! cards:
+#/sbin/modprobe qlogicfas
+# QLogic ISP2100 SCSI support:
+#/sbin/modprobe qlogicfc
+# Seagate ST-02 and Future Domain TMC-8xx SCSI support:
+#/sbin/modprobe seagate
+# Symbios Logic sym53c416 support:
+#/sbin/modprobe sym53c416
+# Trantor T128/T128F/T228 SCSI support:
+#/sbin/modprobe t128
+# Tekram DC390(T) and Am53/79C974 (PCscsi) SCSI support:
+#/sbin/modprobe tmscsim
+# UltraStor 14F and 34F support (also see driver below):
+#/sbin/modprobe u14-34f
+# UltraStor 14F, 24F, and 34F support:
+#/sbin/modprobe ultrastor
+# Western Digital 7000 SCSI support:
+#/sbin/modprobe wd7000
+
+### Floppy drive support:
+# (Most Linux kernels should already contain this)
+#/sbin/modprobe floppy
+
+### Floppy tape support (such as Colorado Jumbo 250 or other QIC-80 drives):
+#/sbin/modprobe ftape
+
+### IP masquerading modules:
+# These modules are used with IP masquerading, a process which allows you to
+# use a Linux box connected to the Internet (via PPP or SLIP, or some other
+# means) as a gateway for other Linux, Windows, Macintosh boxes on your local
+# network that don't have real IP addresses on the Internet. The packets
+# going through the Linux machine are "masqueraded", or made to look as if
+# they're all coming from the one real IP address on the Internet.
+#
+# As a quick example (for a much more extensive treatment, see the IP-Masquerade
+# mini-HOWTO) to allow Internet access to a local network 192.168.11.0 with a
+# netmask of 255.255.255.0, you'd use these commands in /etc/rc.d/rc.local:
+#
+# # EXTERNAL -> external network interface
+# # INTERNAL -> internal network interface
+# EXTERNAL=eth0
+# INTERNAL=eth1
+# echo 1 > /proc/sys/net/ipv4/ip_forward
+# echo "Setting up NAT (Network Address Translation)..."
+# # by default, nothing is forwarded.
+# iptables -P FORWARD DROP
+# # Allow all connections OUT and only related ones IN
+# iptables -A FORWARD -i $EXTERNAL -o $INTERNAL -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT
+# iptables -A FORWARD -i $INTERNAL -o $EXTERNAL -j ACCEPT
+# # enable MASQUERADING
+# iptables -t nat -A POSTROUTING -o $EXTERNAL -j MASQUERADE
+#
+# Then you'd have to set the other boxes on your local network to use the
+# Linux machine as their TCP/IP gateway. You'll probably also need to plug
+# in the IP address for your Internet service provider in each machine's DNS
+# setup.
+#
+# Now, on to the IP masquerading modules. The example above is good enough
+# for most things that use TCP in a relatively simple fashion. It'll work
+# for telnet and http, for instance. But, the system breaks down when you
+# get protocols that use ports in more complicated ways. Luckily the Linux
+# kernel gurus have thought of this and have prepared some modules that
+# support masquerading of trickier protocols. The ipchains command is mighty
+# flexible as well, and a lot of things can be made to work just by setting
+# that up correctly.
+#
+# Special modules for iptables. See also "man iptables" for information about
+# that powerful firewall tool.
+#
+#/sbin/modprobe ipt_conntrack
+#/sbin/modprobe ip_conntrack
+#/sbin/modprobe ip_conntrack_ftp
+#/sbin/modprobe ip_conntrack_irc
+#/sbin/modprobe ip_nat_ftp
+#/sbin/modprobe ip_nat_irc
+#/sbin/modprobe ip_nat_snmp_basic
+
+### CPU frequency scaling support
+#
+# Below, set CPUFREQ to enable CPU frequency scaling to save system power.
+#
+# To always try to use CPU frequency scaling, set to: on
+# To never use CPU frequency scaling, set to: off
+# To use it only when the battery module is loaded (this will cause it to
+# be used by default with most laptops), set to: battery
+#
+CPUFREQ=battery
+
+# If CPUFREQ=battery and the battery module is loaded, turn on CPUfreq.
+if [ "$CPUFREQ" = "battery" ]; then
+ if /sbin/lsmod | grep -wq battery ; then
+ # CPUFREQ=battery and a battery was detected, so change CPUFREQ
+ # to 'on' so that the block of script below will try to enable it.
+ CPUFREQ=on
+ fi
+fi
+
+### Enable CPU frequency scaling if requested:
+if [ "$CPUFREQ" = "on" ]; then
+ ### CPU frequency scaling modules for the Linux kernel CPUfreq subsystem.
+ #
+ # Clock scaling allows you to change the clock speed of the CPUs on the fly.
+ # This is a nice method to save battery power, because the lower the clock
+ # speed is, the less power the CPU consumes.
+ #
+ # It should not hurt anything to try to load these modules.
+ #
+ # generic ACPI P-States based driver:
+ /sbin/modprobe acpi-cpufreq 2>/dev/null
+ # AMD mobile K6-2/3+ PowerNow!:
+ /sbin/modprobe powernow-k6 2>/dev/null
+ # AMD mobile Athlon PowerNow!:
+ /sbin/modprobe powernow-k7 2>/dev/null
+ # AMD Cool&Quiet PowerNow!:
+ /sbin/modprobe powernow-k8 2>/dev/null
+ # Intel SpeedStep using the SMI BIOS interface:
+ /sbin/modprobe speedstep-smi 2>/dev/null
+ # Intel SpeedStep on ICH-based chipsets:
+ /sbin/modprobe speedstep-ich 2>/dev/null
+ # Intel Enhanced SpeedStep :
+ /sbin/modprobe speedstep-centrino 2>/dev/null
+ # Intel Pentium4/Xeon clock modulation is not enabled by default.
+ # The kernel documentation says "This adds the CPUFreq driver for Intel
+ # Pentium 4 / XEON processors. When enabled it will lower CPU temperature
+ # by skipping clocks. This driver should be only used in exceptional
+ # circumstances when very low power is needed because it causes severe
+ # slowdowns and noticeable latencies. Normally Speedstep should be used
+ # instead."
+ # If you still want to try the Pentium4/Xeon module, uncomment the next line:
+ #/sbin/modprobe p4-clockmod 2>/dev/null
+ # NatSemi Geode GX / Cyrix MediaGXm:
+ /sbin/modprobe gx-suspmod 2>/dev/null
+ # Transmeta Crusoe / Efficeon LongRun:
+ /sbin/modprobe longrun 2>/dev/null
+ # VIA Cyrix Longhaul:
+ /sbin/modprobe longhaul 2>/dev/null
+ # nForce2 FSB changing cpufreq driver:
+ /sbin/modprobe cpufreq-nforce2 2>/dev/null
+ # Enhanced PowerSaver driver for VIA C7 CPUs:
+ /sbin/modprobe e_powersaver 2>/dev/null
+
+ ### CPU frequency scaling policies:
+ #
+ # Use the CPUFreq governor 'powersave' as default. This sets the
+ # frequency statically to the lowest frequency supported by the CPU.
+ #/sbin/modprobe cpufreq_powersave
+ #
+ # Use the CPUFreq governor 'performance' as default. This sets the
+ # frequency statically to the highest frequency supported by the CPU.
+ #/sbin/modprobe cpufreq_performance
+ #
+ # Use the CPUFreq governor 'conservative' as default. This allows you
+ # to get a full dynamic frequency capable system by simply loading your
+ # cpufreq low-level hardware driver. Be aware that not all cpufreq
+ # drivers support the 'conservative' governor -- the fallback governor
+ # will be the 'performance' governor.
+ #/sbin/modprobe cpufreq_conservative
+ #
+ # Use the CPUFreq governor 'ondemand' as default. This allows you to
+ # get a full dynamic frequency capable system by simply loading your
+ # cpufreq low-level hardware driver. Be aware that not all cpufreq
+ # drivers support the 'ondemand' governor -- the fallback governor will
+ # be the performance governor. This seems to be the most-recommended
+ # scaling policy, so rc.modules will try to load this by default.
+ /sbin/modprobe cpufreq_ondemand 2>/dev/null
+
+ ### CPU scaling governor:
+ #
+ # Set the default scaling_governor to be used (such as userspace or ondemand)
+ # if there is a CPUFreq scaling policy module loaded that supports it:
+ SCALING_GOVERNOR=ondemand
+ #
+ # Try to enable the scaling_governor selected above:
+ if [ -r /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors ]; then
+ if grep -wq "$SCALING_GOVERNOR" /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors ; then
+ if [ -r /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor ]; then
+ for SYSCPUFILE in /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor ; do
+ echo "$SCALING_GOVERNOR" > $SYSCPUFILE
+ done
+ fi
+ fi
+ fi
+
+fi # End enabling CPU scaling support
+
+# We are done with these variables now:
+unset NEWMODS RELEASE CPUFREQ SCALING_GOVERNOR SYSCPUFILE
+