diff options
Diffstat (limited to 'source/installer/sources/initrd/etc/pcmcia')
-rw-r--r-- | source/installer/sources/initrd/etc/pcmcia/config.opts | 71 |
1 files changed, 71 insertions, 0 deletions
diff --git a/source/installer/sources/initrd/etc/pcmcia/config.opts b/source/installer/sources/initrd/etc/pcmcia/config.opts new file mode 100644 index 000000000..5b8d5faf3 --- /dev/null +++ b/source/installer/sources/initrd/etc/pcmcia/config.opts @@ -0,0 +1,71 @@ +# +# Local PCMCIA Configuration File +# +#---------------------------------------------------------------------- +# +# System resources available for PCMCIA cards +# +# NOTE: these settings have no effect on resources assigned to a +# CardBus bridge device itself; this file only affects resources +# assigned to cards. Also, interrupt settings here will only affect +# ISA bus interrupts assigned to 16-bit cards. PCI interrupts +# generally can't be reconfigured. +# +# With the kernel PCMCIA subsystem, these settings also have no effect +# at all on resources used for 32-bit CardBus cards. Those are set by +# the PCI hotplug subsystem. +# + +# These are the official ports to use from pcmcia-cs: +#include port 0x100-0x4ff, port 0x800-0x8ff, port 0xc00-0xcff +# However, ports 0x810-0x81f hurt on some DELL machines and +# ports 0x3b0-0x3df hurt on some FSC machines, so we use this port +# list instead: +include port 0x100-0x3af, port 0x3e0-0x4ff, port 0xc00-0xcff + +include memory 0xc0000-0xfffff +include memory 0xa0000000-0xa0ffffff, memory 0x60000000-0x60ffffff + +# High port numbers do not always work... +# include port 0x1000-0x17ff + +# Extra port range for IBM Token Ring +include port 0xa00-0xaff + +# Resources we should not use, even if they appear to be available + +# First built-in serial port +exclude irq 4 +# Second built-in serial port +#exclude irq 3 +# First built-in parallel port +exclude irq 7 + +#---------------------------------------------------------------------- + +# Examples of options for loadable modules + +# To fix sluggish network with IBM ethernet adapter... +#module "pcnet_cs" opts "mem_speed=600" + +# Options for IBM Token Ring adapters +#module "ibmtr_cs" opts "mmiobase=0xd0000 srambase=0xd4000" + +# Options for Raylink/WebGear driver: uncomment only one line... +# These are the default settings for use with the WebGear Windows driver: +#module "ray_cs" opts "essid=NETWORK_NAME hop_dwell=128 beacon_period=256 translate=0" +# Generic ad-hoc network +#module "ray_cs" opts "essid=ADHOC_ESSID hop_dwell=128 beacon_period=256 translate=1" +# Infrastructure network for older cards +#module "ray_cs" opts "net_type=1 essid=ESSID1" +# Infrastructure network for WebGear +#module "ray_cs" opts "net_type=1 essid=ESSID1 translate=1 hop_dwell=128 beacon_period=256" + +# Options for WaveLAN/IEEE driver (AccessPoint mode)... +#module "wvlan_cs" opts "station_name=MY_PC" +# Options for WaveLAN/IEEE driver (ad-hoc mode)... +#module "wvlan_cs" opts "port_type=3 channel=1 station_name=MY_PC" + +# Options for Xircom Netwave driver... +#module "netwave_cs" opts "domain=0x100 scramble_key=0x0" + |