diff options
Diffstat (limited to 'source/a/usb_modeswitch')
| -rw-r--r-- | source/a/usb_modeswitch/device_reference.txt | 259 | ||||
| -rwxr-xr-x | source/a/usb_modeswitch/usb_modeswitch.SlackBuild | 12 |
2 files changed, 55 insertions, 216 deletions
diff --git a/source/a/usb_modeswitch/device_reference.txt b/source/a/usb_modeswitch/device_reference.txt index 1a21efb3b..d34ec3ed0 100644 --- a/source/a/usb_modeswitch/device_reference.txt +++ b/source/a/usb_modeswitch/device_reference.txt @@ -1,7 +1,7 @@ # -# Device and Configuration Reference (UTF-8 encoding used) +# Device Reference (UTF-8 encoding used) # -# Last modified: 2013-10-16 +# Last modified: 2014-05-29 # # Collection of configurations for usb_modeswitch, a mode switching # tool for controlling flip flop (multiple mode) USB devices @@ -21,191 +21,14 @@ # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # -# For custom settings: -# Numbers can be decimal or hexadecimal, MessageStrings MUST be -# hexadecimal without prepended "0x". Digits 9-16 in the known -# MessageStrings are arbitrary; I set them to "12345678" - -# What it all means (short command line flags appended): -# -# -# * DefaultVendor -v <hex number> -# * DefaultProduct -p <hex number> -# -# This is the ID the USB device shows after having been plugged in. -# The program needs this, either on the command line or in the config -# file; if not found -> no action. -# -# -# * TargetVendor -V <hex number> -# * TargetProduct -P <hex number> -# -# These are the IDs of the USB device after successful mode switching. -# They are optional, but I recommend to provide them for better analysis. -# You definitely need them if you enable CheckSuccess (see below) -# -# -# * TargetProductList (file only) <comma separated hex strings> -# -# Like TargetProduct, but more than one possibility. Only used in automated -# config files (in /etc/usb_modeswitch.d). -# -# -# * TargetClass -C <hex number> -# -# Some weird devices don't change IDs. They only switch the device class. -# If the device has the target class -> no action (and vice versa) -# -# -# * MessageEndpoint -m <hex number> -# -# A kind of address inside the interface to which the "message" -# (the sequence that does the actual switching) is directed. -# Obsolete since version 0.9.7, only useful for testing -# -# -# * MessageContent -M <hex string> -# -# A hex string containing the "message" sequence; it will be -# sent as a USB bulk transfer -# -# -# * MessageContent2, ...3 -2/-3 <hex string> -# -# Additional "messages". Use with "NeedResponse"! -# -# -# * ReleaseDelay -w <milliseconds> -# -# Waiting time after message transfers. Helps with some sensitive devices -# that don't want any traffic after the mode switch initialisation -# -# -# * ResponseEndpoint -r <hex number> -# * NeedResponse <0/1> -n -# -# Some devices were reported to require receiving the response of the -# bulk transfer to do the switching properly. Usually not needed. -# Starting from version 1.0.0 the ResponseEndpoint is autodetected -# if not given -# -# -# * DetachStorageOnly <0/1> -d -# -# Some early devices just needed to be detached from the usb-storage -# driver to initiate the mode switching. Now paractically obsolete for -# switching, but still comes handy sometimes -# -# -# * HuaweiMode <0/1> -H -# -# Some early Huawei devices can be switched by a special control -# message. Don't use with recent devices -# -# -# * SonyMode <0/1> -O -# -# Some Sony-Ericsson devices can be switched by a special control -# message. May take a long time (20+ seconds). -# -# -# * SierraMode <0/1> -S -# * KobilMode <0/1> -T -# * GCTMode <0/1> -G -# * SequansMode <0/1> -N -# * MobileActionMode <0/1> -A -# * QisdaMode <0/1> -B -# * QuantaMode <0/1> -E -# * PantechMode <0/1> -F -# * BlackberryMode <0/1> -Z -# * CiscoMode <0/1> -L -# -# -# Flags to support devices that need special control messages. -# The names are referring to the respective manufacturers. -# -# -# * ResetUSB <0/1> -R -# -# Few devices or systems need a rougher treatment. If the switching seems -# to do something but your system does not reflect it, try this somewhat -# brutal method to do a reset after switching. -# Mind that if your device switched OK before, this may set it back to -# storage mode ... -# -# -# * Interface -i <hex number> -# * Configuration -u <hex number> -# * AltSetting -a <hex number> -# -# More USB parameter to help with tricky devices and for doing lots -# of cruel experiments ... -# -## Note: -## AltSetting/Configuration changes and ResetUSB are executed after all -## other steps and can be combined or used on their own (e.g. a reset -## might have the same effect as a manual replug) -# -# -# * InquireDevice <0|1> -I (disables inquiry) -# -# The standard since 1.0.0 is to do a SCSI inquiry on the default device -# before other actions. This might be a future way to identify a device -# without ambiguities. If it causes trouble with your device, just disable. -# -# -# * CheckSuccess -s <number> -# -# Check continuously if the switch succeeded for max <number> seconds. -# First, an interface access test: most devices vanish after -# switching and can't be accessed anymore. -# Second, a recount of target devices: one more than at the initial -# count, at the same bus with a higher device number -> device -# switched fine. -# It's safe to give a higher value than needed; checking stops as -# soon as the target device is found -# -# -# * NoDriverLoading <0|1> (no command line parameter) -# -# The binary tells the wrapper script NOT to check for and initiate -# binding of the serial driver after switching. -# Mostly useful for non-modem devices. -# -# -# * WaitBefore <seconds> (no command line parameter) -# -# Waiting time before taking any action. Helps with some sensitive setups. -# -# -# * NoMBIMCheck <0|1> (no command line parameter) -# -# Disable the check for new MBIM standard devices, which is always done -# by default. -# -# -# -# -> All other entries in config files are just ignored <- - -# Additional command line flags: -# -# Verbose output -W -# No output at all -q -# Use config file -c <file> -# Use stdin for long config -t -# Give long config as string -f <multiline string using config file syntax> -# Give bus number for ID'ing -b -# Give dev number for ID'ing -g - - -# For filling in all this information for an unknown device, -# see instructions and links on the homepage: -# http://www.draisberghof.de/usb_modeswitch +# For a parameter reference see file REFERENCE in the data package # # If you find working codes and configurations, please contribute # them! + + ####################################################### # Option GlobeSurfer Icon (aka "Vodafone EasyBox") # @@ -2276,19 +2099,6 @@ TargetClass=0xff MessageContent="55534243123456780000000000000606f50402527000000000000000000000" -######################################################## -# Vodafone/ZTE K3806-Z - -DefaultVendor= 0x19d2 -DefaultProduct=0x0013 - -TargetVendor= 0x19d2 -TargetProduct= 0x0015 - -MessageContent="5553424312345678000000000000061b000000020000000000000000000000" - -NeedResponse=1 - ######################################################## # T-Mobile NL (Huawei E352) # @@ -3029,21 +2839,7 @@ NeedResponse=1 ######################################################## -# TW-3G HSPA+ -# -# Contributor: Nordic Nurse - -DefaultVendor= 0x1c9e -DefaultProduct=0x98ff - -TargetVendor= 0x1c9e -TargetProduct= 0x9801 - -MessageContent="55534243123456780000000080000606f50402527000000000000000000000" - - -######################################################## -# Samsung GT-B1110 +# Samsung GT-B1110 # # Contributor: Spelroth @@ -3997,4 +3793,47 @@ TargetProduct= 0x6085 PantechMode=1 + +####################################################### +# Quanta MobileGenie 4G lte +# +# Contributor: Richard Wood + +DefaultVendor= 0x0408 +DefaultProduct=0xea43 + +TargetVendor= 0x0408 +TargetProduct= 0xea47 + +MessageContent="5553424312345678000000000000061b000000020000000000000000000000" + + +######################################################## +# AVM Fritz!Wlan USB Stick N v2 +# +# Contributor: merla + +DefaultVendor= 0x057c +DefaultProduct=0x62ff + +TargetVendor= 0x057c +TargetProduct= 0x8501 + +MessageContent="5553424312345678000000000000061b000000ff0000000000000000000000" + + ######################################################## +# Alcatel-sbell ASB TL131 TD-LTE +# +# Contributor: scateu + +DefaultVendor= 0x05c6 +DefaultProduct=0x9024 + +TargetVendor= 0x05c6 +TargetProduct= 0x9025 + +MessageContent="5553424312345678000000000000061b000000020000000000000000000000" + + +####################################################### diff --git a/source/a/usb_modeswitch/usb_modeswitch.SlackBuild b/source/a/usb_modeswitch/usb_modeswitch.SlackBuild index ac26ff4d6..703222152 100755 --- a/source/a/usb_modeswitch/usb_modeswitch.SlackBuild +++ b/source/a/usb_modeswitch/usb_modeswitch.SlackBuild @@ -2,7 +2,7 @@ # Slackware build script for usb_modeswitch. -# Copyright 2010, 2012, 2013 Patrick J. Volkerding, Sebeka, Minnesota, USA +# Copyright 2010, 2012, 2013, 2015 Patrick J. Volkerding, Sebeka, Minnesota, USA # Copyright 2010 David Somero, Athens, TN, USA # All rights reserved. # @@ -24,14 +24,14 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. PKGNAM=usb_modeswitch -VERSION=${VERSION:-2.0.1} -DATAVER=${DATAVER:-20130807} +VERSION=${VERSION:-2.2.6} +DATAVER=${DATAVER:-20151101} BUILD=${BUILD:-1} # Automatically determine the architecture we're building on: if [ -z "$ARCH" ]; then case "$( uname -m )" in - i?86) export ARCH=i486 ;; + i?86) export ARCH=i586 ;; arm*) export ARCH=arm ;; # Unless $ARCH is already set, use uname -m for all other archs: *) export ARCH=$( uname -m ) ;; @@ -45,8 +45,8 @@ CWD=$(pwd) TMP=${TMP:-/tmp} PKG=$TMP/package-$PKGNAM -if [ "$ARCH" = "i486" ]; then - SLKCFLAGS="-O2 -march=i486 -mtune=i686" +if [ "$ARCH" = "i586" ]; then + SLKCFLAGS="-O2 -march=i586 -mtune=i686" LIBDIRSUFFIX="" elif [ "$ARCH" = "i686" ]; then SLKCFLAGS="-O2 -march=i686 -mtune=i686" |