diff options
Diffstat (limited to 'source/a/udev/udev.SlackBuild')
-rwxr-xr-x | source/a/udev/udev.SlackBuild | 169 |
1 files changed, 0 insertions, 169 deletions
diff --git a/source/a/udev/udev.SlackBuild b/source/a/udev/udev.SlackBuild deleted file mode 100755 index d39da2629..000000000 --- a/source/a/udev/udev.SlackBuild +++ /dev/null @@ -1,169 +0,0 @@ -#!/bin/sh - -# Copyright 2006, 2008, 2009, 2010, 2011, 2012, 2013 Patrick J. Volkerding, Sebeka, MN, USA -# All rights reserved. -# -# Redistribution and use of this script, with or without modification, is -# permitted provided that the following conditions are met: -# -# 1. Redistributions of this script must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED -# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO -# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, -# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; -# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR -# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF -# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -VERSION=${VERSION:-$(echo udev-*.tar.* | cut -d - -f 2 | rev | cut -f 3- -d . | rev)} -BUILD=${BUILD:-7} - -NUMJOBS=${NUMJOBS:-" -j7 "} - -# Automatically determine the architecture we're building on: -if [ -z "$ARCH" ]; then - case "$( uname -m )" in - i?86) export ARCH=i486 ;; - arm*) export ARCH=arm ;; - # Unless $ARCH is already set, use uname -m for all other archs: - *) export ARCH=$( uname -m ) ;; - esac -fi - -if [ "$ARCH" = "x86_64" ]; then - LIBDIRSUFFIX="64" -else - LIBDIRSUFFIX="" -fi - -CWD=$(pwd) -TMP=${TMP:-/tmp} -PKG=$TMP/package-udev - -rm -rf $PKG -mkdir -p $TMP $PKG/lib/udev -cd $TMP -rm -rf udev-$VERSION -tar xvf $CWD/udev-$VERSION.tar.xz || exit 1 -cd udev-$VERSION || exit 1 -chown -R root:root . -find . \ - \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ - -exec chmod 755 {} \; -o \ - \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ - -exec chmod 644 {} \; - -# Fix ata_id (remove with udev-186+) -zcat $CWD/udev-ata_id-fixup-all-8-not-only-6-bytes-of-the-fw_rev.patch.gz | patch -p1 || exit 1 - -# Fix 42-usb-hid-pm.rules (remove with udev-187+) -zcat $CWD/fix-42-usb-hid-pm.rules.diff.gz | patch -p1 --verbose || exit 1 - -# Fixup the rule generator for our use -zcat $CWD/rule_generator.diff.gz | patch -p1 --verbose || exit 1 - -# Patch 60-cdrom_id.rules to create a full set of symlinks. -# This is needed for a hotplugged optical device since the generated -# rules will not be used until the second time the device is plugged. -zcat $CWD/60-cdrom_id.rules.diff.gz | patch -p1 --verbose || exit 1 - -# static libudev is needed for lvm2 -# --enable-udev_acl was removed (will be part of future CK release) -# --enable-floppy support was also disabled by default in 173 -# --enable-rule_generator was disabled by default in 175 - -LDFLAGS="$LDFLAGS -lrt" \ -./configure \ - --prefix=/usr \ - --with-rootprefix=/ \ - --libdir=/usr/lib${LIBDIRSUFFIX} \ - --with-rootlibdir=/lib${LIBDIRSUFFIX} \ - --with-firmware-path=/lib/firmware/updates:/lib/firmware \ - --sysconfdir=/etc \ - --bindir=/sbin \ - --sbindir=/sbin \ - --libexecdir=/lib \ - --enable-introspection \ - --mandir=/usr/man \ - --docdir=/usr/doc/udev-$VERSION \ - --enable-floppy \ - --enable-static \ - --enable-rule_generator \ - --build=$ARCH-slackware-linux || exit 1 - -make $NUMJOBS || make || exit 1 -make install DESTDIR=$PKG || exit 1 - -find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ - | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true - -# scsi_id is needed by multipath -( cd $PKG/sbin ; ln -s ../lib/udev/scsi_id scsi_id ) - -# Put udevd back in /sbin -mv $PKG/lib/udev/udevd $PKG/sbin -ln -s /sbin/udevd $PKG/lib/udev/udevd - -mkdir -p \ - $PKG/run \ - $PKG/{etc,lib}/modprobe.d \ - $PKG/etc/rc.d \ - $PKG/etc/udev/rules.d \ - $PKG/lib/firmware - -# Yes, these will clobber existing config files. -cp -a $CWD/config/udev.conf $PKG/etc/udev/udev.conf - -# Copy Slackware custom rules -cp -a $CWD/config/rules.d/* $PKG/lib/udev/rules.d/ - -# Now the init script and module-init-tools stuff -cp -a $CWD/config/rc.d/rc.udev.new $PKG/etc/rc.d/rc.udev.new -cp -a $CWD/config/modprobe.d/*.conf $PKG/lib/modprobe.d/ -cp -a $CWD/config/modprobe.d/README $PKG/etc/modprobe.d/ - -chown -R root:root $PKG/etc $PKG/lib/modprobe.d -find $PKG/etc $PKG/lib/modprobe.d -type f -exec chmod 644 {} \; -find $PKG/etc -type d -exec chmod 755 {} \; -chmod 0755 $PKG/etc/rc.d/rc.udev.new - -# Add extra device nodes to the package that udev doesn't make: -tar xvf $CWD/udev-fixed-devices.tar.gz -C $PKG - -chown -R root:root $PKG/lib/udev -chmod 0755 $PKG/lib/udev/* - -mkdir -p $PKG/usr/doc/udev-$VERSION -cp -a \ - COPYING* README* TODO \ - $PKG/usr/doc/udev-$VERSION - -# Don't package the API docs: -rm -rf $PKG/usr/share/gtk-doc ; rmdir $PKG/usr/share 2>/dev/null - -# Compress and fix manpage symlinks: -if [ -d $PKG/usr/man ]; then - ( cd $PKG/usr/man - for manpagedir in $(find . -type d -name "man*") ; do - ( cd $manpagedir - for eachpage in $( find . -type l -maxdepth 1) ; do - ln -s $( readlink $eachpage ).gz $eachpage.gz - rm $eachpage - done - gzip -9 *.? - ) - done - ) -fi - -mkdir -p $PKG/install -zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh -cat $CWD/slack-desc > $PKG/install/slack-desc - -cd $PKG -/sbin/makepkg -l y -c y $TMP/udev-$VERSION-$ARCH-$BUILD.txz |