summaryrefslogtreecommitdiffstats
path: root/source/a/splitvt
diff options
context:
space:
mode:
Diffstat (limited to 'source/a/splitvt')
-rw-r--r--source/a/splitvt/slack-desc19
-rwxr-xr-xsource/a/splitvt/splitvt.SlackBuild67
-rw-r--r--source/a/splitvt/splitvt_1.6.5-9.diff1073
3 files changed, 1159 insertions, 0 deletions
diff --git a/source/a/splitvt/slack-desc b/source/a/splitvt/slack-desc
new file mode 100644
index 000000000..0aa6ab24d
--- /dev/null
+++ b/source/a/splitvt/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+ |-----handy-ruler------------------------------------------------------|
+splitvt: splitvt (run multiple shells in a single window)
+splitvt:
+splitvt: This program splits the screen into two windows, one above the other,
+splitvt: and runs a shell in each one.
+splitvt:
+splitvt: Splitvt was written by Sam Lantinga.
+splitvt:
+splitvt:
+splitvt:
+splitvt:
+splitvt:
diff --git a/source/a/splitvt/splitvt.SlackBuild b/source/a/splitvt/splitvt.SlackBuild
new file mode 100755
index 000000000..f643a825c
--- /dev/null
+++ b/source/a/splitvt/splitvt.SlackBuild
@@ -0,0 +1,67 @@
+#!/bin/sh
+
+# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+VERSION=1.6.5
+ARCH=${ARCH:-x86_64}
+BUILD=${BUILD:-1}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-splitvt
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf splitvt-1.6.5
+tar xzvf $CWD/splitvt-1.6.5.tar.gz
+cd splitvt-1.6.5
+zcat $CWD/splitvt_1.6.5-9.diff.gz | patch -p1 --verbose || exit 1
+chown -R root:root .
+./configure
+make || exit 1
+mkdir -p $PKG/usr/bin
+cat splitvt > $PKG/usr/bin/splitvt
+chmod 755 $PKG/usr/bin/splitvt
+mkdir -p $PKG/usr/man/man1
+cat splitvt.1 | gzip -9c > $PKG/usr/man/man1/splitvt.1.gz
+mkdir -p $PKG/usr/doc/splitvt-1.6.5
+cp -a examples ANNOUNCE CHANGES NOTES README TODO \
+ $PKG/usr/doc/splitvt-1.6.5
+( cd $PKG/usr/doc/splitvt-1.6.5
+ find . -type d | xargs chmod 755
+ find . -type f | xargs chmod 644 )
+
+# Strip everything for good measure:
+( cd $PKG
+ find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+ find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+# Build the package:
+cd $PKG
+makepkg -l y -c n $TMP/splitvt-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/a/splitvt/splitvt_1.6.5-9.diff b/source/a/splitvt/splitvt_1.6.5-9.diff
new file mode 100644
index 000000000..47d560377
--- /dev/null
+++ b/source/a/splitvt/splitvt_1.6.5-9.diff
@@ -0,0 +1,1073 @@
+--- splitvt-1.6.5.orig/debian/changelog
++++ splitvt-1.6.5/debian/changelog
+@@ -0,0 +1,147 @@
++splitvt (1.6.5-9) unstable; urgency=low
++
++ * Ensure that -upper and -lower have arguemnts. Closes: #319091
++
++ -- Joey Hess <joeyh@debian.org> Tue, 19 Jul 2005 17:50:32 -0400
++
++splitvt (1.6.5-8) unstable; urgency=low
++
++ * Patch from Andreas Jochens to fix building with gcc 4.0. Closes: #294620
++
++ -- Joey Hess <joeyh@debian.org> Fri, 15 Jul 2005 17:38:09 +0300
++
++splitvt (1.6.5-7) unstable; urgency=low
++
++ * Many changes to make it build cleanly with -Wall. This included some
++ missing headers that probably caused it to crash on amd64.
++ * Disabled vttest, since its read from the console to try to detect a vt100
++ terminal was responsible for startup hang on sparc. Closes: #273330
++
++ -- Joey Hess <joeyh@debian.org> Wed, 26 Jan 2005 20:32:34 -0500
++
++splitvt (1.6.5-6) unstable; urgency=low
++
++ * Rebuilt to update to current policy on /usr/doc links &etc.
++
++ -- Joey Hess <joeyh@debian.org> Sat, 8 Feb 2003 12:32:25 -0500
++
++splitvt (1.6.5-5) unstable; urgency=low
++
++ * Updated to debhelper v4.
++
++ -- Joey Hess <joeyh@debian.org> Thu, 13 Jun 2002 16:30:04 -0400
++
++splitvt (1.6.5-4) unstable; urgency=low
++
++ * Updated patch to not break resizing.
++
++ -- Joey Hess <joeyh@debian.org> Fri, 5 Oct 2001 20:09:25 -0400
++
++splitvt (1.6.5-3) unstable; urgency=low
++
++ * Patch from Robert de Bath <robert$@mayday.cix.co.uk> that has a doc fix
++ and also fixes a splitvt segfault when one uses the CSI ? 3 h to got o
++ 132 column mode. Closes: #113868 (also sent upstream)
++
++ -- Joey Hess <joeyh@debian.org> Sat, 29 Sep 2001 16:44:25 -0400
++
++splitvt (1.6.5-2) unstable; urgency=HIGH
++
++ * New upstream version, with a format string hole fixed, and several
++ possible buffer overfllows fixed.
++ - Of those, only (I think) the format string attack and two of the
++ buffer overflows can affect the debian package.
++ - Luckily, my last release of the package back in June 2000 made
++ it only need to be sgid tty.
++ - Total possible impact: attacker could possibly crack the tty group.
++ * Goofed up version number because this source is already in the
++ archives.
++
++ -- Joey Hess <joeyh@debian.org> Wed, 17 Jan 2001 23:39:09 -0800
++
++splitvt (1.6.4-4) unstable; urgency=low
++
++ * Drop setgid first. Very doubtful this effects anything, but it's the
++ right way to do things.
++
++ -- Joey Hess <joeyh@debian.org> Thu, 15 Jun 2000 11:37:48 -0700
++
++splitvt (1.6.4-3) unstable; urgency=low
++
++ * Modified to use glibc's sys4-ish pty routines; devpts, grantpt, etc.
++ * Modified to drop sgid bit properly.
++ * Now I can make it just sgid utmp, rather than suid root, and it
++ continues to work just as before. Beaujolais! Closes: #65227
++ * Removed no-longer-needed glibc stdion/stdout fix patch.
++
++ -- Joey Hess <joeyh@debian.org> Wed, 14 Jun 2000 14:13:30 -0700
++
++splitvt (1.6.4-2) unstable; urgency=low
++
++ * Corrected build-depends, Closes: #65584
++
++ -- Joey Hess <joeyh@debian.org> Tue, 13 Jun 2000 11:42:02 -0700
++
++splitvt (1.6.4-1) unstable; urgency=high
++
++ * New upstream release with security fix (already applied in the previous
++ version, I'm just syncing up with upstream).
++ * Added homepage to copyright file.
++ * Added some more files to docs.
++ * Now under the GPL explicitly, some updates to the copyright file.
++
++ -- Joey Hess <joeyh@debian.org> Sun, 11 Jun 2000 21:42:41 -0700
++
++splitvt (1.6.3-7.0slink1) stable; urgency=high
++
++ * Security fix.
++
++ -- Daniel Jacobowitz <dan@debian.org> Sat, 3 Jun 2000 17:56:33 -0400
++
++splitvt (1.6.3-7) unstable; urgency=low
++
++ * Build dep.
++
++ -- Joey Hess <joeyh@debian.org> Sat, 4 Dec 1999 16:21:35 -0800
++
++splitvt (1.6.3-6) unstable; urgency=low
++
++ * FHS
++
++ -- Joey Hess <joeyh@debian.org> Sat, 11 Sep 1999 01:27:49 -0700
++
++splitvt (1.6.3-5) unstable; urgency=low
++
++ * vtmouse.c: Don't use stdin/stdout as initializers. Instead, in
++ event_getc(), set xt_input and xt_output to stdin and stdout if
++ they are not yet set. This is for the ports to other architectures.
++ (#29597)
++
++ -- Joey Hess <joeyh@debian.org> Tue, 17 Nov 1998 15:50:53 -0800
++
++splitvt (1.6.3-4) unstable; urgency=low
++
++ * Built with newest debhelper to change how the suid binary is registered.
++
++ -- Joey Hess <joeyh@debian.org> Tue, 27 Oct 1998 21:59:05 -0800
++
++splitvt (1.6.3-3) unstable; urgency=low
++
++ * Hacked in a -f flag, that allows you to resize one of the splitvt
++ windows down to 1 line tall. This is particularly useful for ticker.
++
++ -- Joey Hess <joeyh@debian.org> Mon, 7 Sep 1998 19:56:53 -0700
++
++splitvt (1.6.3-2) unstable; urgency=low
++
++ * Fixed package description spelling (#18990).
++
++ -- Joey Hess <joeyh@debian.org> Thu, 5 Mar 1998 17:00:19 -0800
++
++splitvt (1.6.3-1) unstable; urgency=low
++
++ * First release.
++ * Write to author and clarified copyright.
++ * Change /etc/utmp to /var/run/utmp
++
++ -- Joey Hess <joeyh@debian.org> Wed, 1 Oct 1997 16:19:01 -0400
+--- splitvt-1.6.5.orig/debian/control
++++ splitvt-1.6.5/debian/control
+@@ -0,0 +1,14 @@
++Source: splitvt
++Section: utils
++Priority: optional
++Build-Depends: debhelper (>= 4), libncurses5-dev, dpkg-dev (>= 1.9.0)
++Maintainer: Joey Hess <joeyh@debian.org>
++Standards-Version: 3.5.8.0
++
++Package: splitvt
++Architecture: any
++Depends: ${shlibs:Depends}, ${misc:Depends}
++Description: run two programs in a split screen
++ A utility to split a vt100 compatible screen into two halves,
++ upper and lower, and run a different program simultaneously
++ in each half.
+--- splitvt-1.6.5.orig/debian/compat
++++ splitvt-1.6.5/debian/compat
+@@ -0,0 +1 @@
++4
+--- splitvt-1.6.5.orig/debian/watch
++++ splitvt-1.6.5/debian/watch
+@@ -0,0 +1,2 @@
++version=2
++http://www.devolution.com/~slouken/projects/splitvt/ splitvt-(.*).tar.gz
+--- splitvt-1.6.5.orig/debian/copyright
++++ splitvt-1.6.5/debian/copyright
+@@ -0,0 +1,45 @@
++This is a Debian prepackaged version of the splitvt utility.
++
++This package was put together by Joey Hess <joeyh@debian.org>, using
++sources from:
++ http://www.devolution.com/~slouken/projects/splitvt/
++
++The following copyright notices can still be found in the source code:
++
++ /* utmp.c Shareware Copyright by Sam Lantinga 10/6/93 */
++
++That is a historical relic, though. The current copyright of splitvt is the
++GPL; the text to which can be found in /usr/share/common-licenses/GPL on a
++Debian system.
++
++Before the copyright was expressly changed to the GPL, I wrote and asked the
++author about copyright. He replied:
++
++ Date: Wed, 1 Oct 1997 13:39:18 -0700
++ From: Sam Lantinga <slouken@domo.ccnet.com>
++ To: Joey Hess <joey@kite.ml.org>
++ Cc: slouken@mongoloid.devolution.com
++ Subject: Re: splitvt copyright
++ X-Mailer: My Mailer 1.5 <slouken@devolution.com>
++
++ > I've never heard of no fee shareware before. What restrictions does that
++ > place on the software? Can it be put on a cd with other software (such as a
++ > linux distribution) and sold for profit? Can it be used by anyone, for any
++ > purpose? If so, why don't you just place it under the GPL?
++
++ Consider it GPL'd. I wrote it before I was aware of the GPL, and haven't
++ done much work on it in quite a while.
++
++ > At this point, I'm not sure if splitvt's copyright will let it go in our
++ > main distribution, that is sold on cd, or not. Awaiting your clarification..
++
++ You are more than welcome to put splitvt in the Debian distribution.
++ It is already in Slackware and S.u.S.E.
++
++ See ya!
++ -Sam Lantinga (slouken@devolution.com)
++
++ --
++ Author of Linux Maelstrom -
++ http://www.devolution.com/~slouken/Maelstrom/
++ --
+--- splitvt-1.6.5.orig/debian/rules
++++ splitvt-1.6.5/debian/rules
+@@ -0,0 +1,43 @@
++#!/usr/bin/make -f
++
++build: build-stamp
++build-stamp:
++ dh_testdir
++ rm -f Makefile
++ ./configure
++ $(MAKE)
++ touch build-stamp
++
++clean:
++ dh_testdir
++ dh_testroot
++ rm -f build-stamp
++ dh_clean
++ if [ ! -f Makefile ]; then ./configure ; fi
++ -$(MAKE) distclean
++
++binary-indep: build
++
++binary-arch: build
++ dh_testdir
++ dh_testroot
++ dh_clean
++ dh_install splitvt usr/bin
++ dh_installdocs README TODO ANNOUNCE BLURB
++ dh_installexamples examples/*
++ dh_installmenu
++ dh_installcron
++ dh_installman splitvt.1
++ dh_installchangelogs CHANGES
++ dh_strip
++ dh_compress
++ dh_installdeb
++ dh_shlibdeps
++ dh_gencontrol
++ dh_fixperms
++ chgrp utmp debian/splitvt/usr/bin/splitvt
++ chmod g+s debian/splitvt/usr/bin/splitvt
++ dh_builddeb
++
++binary: binary-indep binary-arch
++.PHONY: build clean binary-indep binary-arch binary
+--- splitvt-1.6.5.orig/splitvt.man
++++ splitvt-1.6.5/splitvt.man
+@@ -176,7 +176,7 @@
+ replace it with entries for the two windows. This allows
+ you to use programs such as 'talk' within the splitvt win-
+ dows. If you do not have write permission to the
+- /etc/utmp file, you will not be able to modify the utmp
++ /etc/utmp file, you will not be able to modify the utmp
+ entries.
+
+ splitvt can be made set-uid root. splitvt will reset its
+--- splitvt-1.6.5.orig/parserc.c
++++ splitvt-1.6.5/parserc.c
+@@ -1,6 +1,8 @@
+
+ /* Routines to parse the ~/.splitvtrc file and set default options */
+
++#include <unistd.h>
++#include <stdlib.h>
+ #include <sys/types.h>
+ #include <sys/stat.h>
+ #include <string.h>
+@@ -213,7 +215,7 @@
+ char line[BUFSIZ], newline[BUFSIZ*2], *parsed[256];
+ char *head, *tail, *ptr, *subptr;
+ char *envptr, envbuf[128];
+- int i, n, quoted=0;
++ int i, n;
+ int ignoring=0, ifs=0;
+
+ /* Get our home directory */
+--- splitvt-1.6.5.orig/splitvt.c
++++ splitvt-1.6.5/splitvt.c
+@@ -13,6 +13,9 @@
+ static char *version=
+ "@(#)Splitvt 1.6.5 1/12/2001 -Sam Lantinga (slouken@devolution.com)\n";
+
++#include <string.h>
++#include <unistd.h>
++#include <stdlib.h>
+ #include <sys/types.h>
+ #include <sys/time.h>
+ #include <sys/wait.h>
+@@ -79,6 +82,8 @@
+ char *upper_args[MAX_ARGS+1]={NULL}, *lower_args[MAX_ARGS+1]={NULL};
+ int upper_empty=1, lower_empty=1;
+
++int force_height=0;
++
+ void print_usage(argv)
+ char *argv;
+ {
+@@ -95,13 +100,14 @@
+ fprintf(stderr, "\t-nologin\t\tOverrides \"set login on\" in startup file\n");
+ fprintf(stderr, "\t-rcfile file\t\tLoads 'file' at startup instead of ~/.splitvtrc\n");
+ fprintf(stderr, "\t-norc\t\t\tSuppresses loading your startup file\n");
++ fprintf(stderr, "\t-f\t\t\tAllow setting screen size of less than 3 lines\n");
+ fprintf(stderr, "\t-v\t\t\tPrint out the version number\n");
+ fprintf(stderr, "\n");
+ exit(1);
+ }
+
+
+-main(argc, argv)
++int main(argc, argv)
+ int argc;
+ char *argv[];
+ {
+@@ -111,7 +117,10 @@
+ int i, len, maxfds, numready;
+ char buffer[BUFSIZ], *ptr;
+ char *xterm_title=NULL;
+- struct timeval tv, *tvptr;
++#ifdef NEED_INET_H
++ struct timeval tv;
++#endif
++ struct timeval *tvptr;
+ fd_set read_mask;
+ static struct passwd pwdata; /* Our passwd entry */
+
+@@ -151,7 +160,7 @@
+ splitvtrc();
+
+ /* Parse command line options */
+- while ( (i=getopt(argc, argv, "n:u:l:r:s:t:vh")) != EOF )
++ while ( (i=getopt(argc, argv, "fn:u:l:r:s:t:vh")) != EOF )
+ {
+ switch (i)
+ {
+@@ -163,11 +172,19 @@
+ break;
+ case 'u': if ( strcmp(optarg, "pper") != 0 )
+ print_usage(argv[0]);
++ if (optind >= argc) {
++ fprintf(stderr, "-upper requires an argument\n");
++ print_usage(argv[0]);
++ }
+ tokenize(upper_args, MAX_ARGS+1,
+ argv[optind++], " ");
+ upper_empty=0;
+ break;
+ case 'l': if ( strcmp(optarg, "ower") == 0 ) {
++ if (optind >= argc) {
++ fprintf(stderr, "-lower requires an argument\n");
++ print_usage(argv[0]);
++ }
+ tokenize(lower_args, MAX_ARGS+1,
+ argv[optind++], " ");
+ lower_empty=0;
+@@ -188,7 +205,9 @@
+ case 'v': printf("%s", version+4);
+ exit(0);
+ break;
+- case 'h':
++ case 'f': force_height=1;
++ break;
++ case 'h':
+ default: print_usage(argv[0]);
+ break;
+ }
+@@ -212,7 +231,7 @@
+ }
+ (void) tty_raw(0); /* Set the tty raw here to prevent lost input */
+
+- if ( (ptr=init_vt100()) != NULL )
++ if ( (ptr=init_vt100(1)) != NULL )
+ {
+ if ( tty_reset(0) < 0 )
+ (void) tty_sane(0);
+@@ -473,6 +492,7 @@
+ }
+ }
+ finish(0);
++ exit(0);
+ }
+
+ void reset_bar(sleeptime)
+@@ -496,6 +516,7 @@
+ " 'x' Lock the screen",
+ " 'h' Show this help screen",
+ " 'q' Quickly quit splitvt",
++" '0-9' Line count for + or -",
+ NULL
+ };
+ vt_showscreen("Splitvt HELP screen:", help);
+@@ -700,7 +721,7 @@
+ tmp_uulines=UU_lines;
+ UU_lines=WU_lines;
+ UU_lines += howfar; /* Positive to go down, negative to go up */
+- init_vt100(); /* Reset the windows to the new size */
++ init_vt100(0); /* Reset the windows to the new size */
+
+ /* Tell the running processes about the size change */
+ if ( topok )
+@@ -722,7 +743,7 @@
+
+ signal(sig, winch);
+
+- if ( (ptr=init_vt100()) != NULL ) {
++ if ( (ptr=init_vt100(1)) != NULL ) {
+ fprintf(stderr, "Can't resize window: %s. (exiting)\n", ptr);
+ finish(0);
+ } else
+--- splitvt-1.6.5.orig/config.c
++++ splitvt-1.6.5/config.c
+@@ -169,7 +169,7 @@
+ strcat(ldflags, " -lsun");
+
+ /* Tell the user what kind of configuration to do */
+- if ( (access("/etc/utmp", (R_OK|W_OK)) == 0) && getuid() )
++ if ( (access("/var/run/utmp", (R_OK|W_OK)) == 0) && getuid() )
+ write_utmp=1;
+ else
+ write_utmp=0;
+@@ -180,14 +180,14 @@
+ VERBOSE_PRINT(
+ "This program doesn't need to be installed set-uid root.\n");
+ VERBOSE_PRINT(
+- "\nThis program will put entries for its windows in /etc/utmp.\n");
++ "\nThis program will put entries for its windows in /var/run/utmp.\n");
+ } else {
+ VERBOSE_PRINT(
+- "If installed set-uid root, this program will put entries for its windows\nin /etc/utmp.\n");
++ "If installed set-uid root, this program will put entries for its windows\nin /var/run/utmp.\n");
+ }
+ } else if ( write_utmp ) {
+ VERBOSE_PRINT(
+- "This program will put entries for its windows in /etc/utmp.\n");
++ "This program will put entries for its windows in /var/run/utmp.\n");
+ VERBOSE_PRINT(
+ "\nIf installed set-uid root, this program will change ownership of the\n");
+ VERBOSE_PRINT(
+@@ -196,7 +196,7 @@
+ VERBOSE_PRINT(
+ "If installed set-uid root, this program will put entries for its windows\n");
+ VERBOSE_PRINT(
+- "in /etc/utmp, and will also change ownership of the ttys it acquires to the\n");
++ "in /var/run/utmp, and will also change ownership of the ttys it acquires to the\n");
+ VERBOSE_PRINT(
+ "user running this program.\n");
+ }
+@@ -225,7 +225,7 @@
+ }
+ fprintf(makefile,
+ "PTYOPTS = -DPTYCHAR=$(PTYCHAR) -DHEXDIGIT=$(HEXDIGIT)\n");
+- sprintf(line, "\nCFLAGS = %s $(PTYOPTS)\nLIBS = %s\n", cflags, ldflags);
++ sprintf(line, "\nCFLAGS = -Wall %s $(PTYOPTS)\nLIBS = %s\n", cflags, ldflags);
+ fprintf(makefile, "%s", line);
+ fprintf(makefile, "OBJS = splitvt.o misc.o utmp.o vt100.o videomem.o terminal.o vttest.o vtmouse.o \\\n");
+ fprintf(makefile, " parserc.o lock.o cut-paste.o\n\n");
+--- splitvt-1.6.5.orig/cut-paste.c
++++ splitvt-1.6.5/cut-paste.c
+@@ -2,8 +2,12 @@
+ /* The cut-paste module for splitvt */
+
+ #include <stdio.h>
++#include <string.h>
++#include <unistd.h>
+ #include "vt100.h"
+ #include "video.h"
++#include "splitvt.h"
++#include "terminal.h"
+
+ #define RIGHT 0x01
+ #define LEFT 0x02
+@@ -41,7 +45,7 @@
+ } else
+ c ^= (SELECTED<<8);
+
+- (*oldattr)=check_attr(c, *oldattr, on);
++ (*oldattr)=check_attr(c, *oldattr, (int)on);
+ put_video(c, win, x, y);
+
+ if ( c&0xFF )
+@@ -86,7 +90,6 @@
+ int len;
+ position *mark1, *mark2;
+ {
+- int selection=0;
+ position startsel, endsel;
+
+ if ( mark1->x == mark2->x )
+@@ -200,9 +203,9 @@
+ void vt_initsel()
+ {
+ extern char *pathsearch(); /* From misc.c */
+- char *display;
+
+ #ifdef USE_XCB
++ char *display;
+ /* Use xcb if we have both an X display and the command. */
+ /* xcb needs to support my hacked '-R' option. */
+ if ( (display=(char *)getenv("DISPLAY")) && pathsearch("xcb", 1) )
+@@ -254,7 +257,7 @@
+ char *buf;
+ int len;
+ {
+- int c, state=NORMAL;
++ int c;
+ position here, cursor, mark1, mark2;
+ window *thiswin;
+
+@@ -311,7 +314,7 @@
+ default: break;
+ }
+ }
+- return; /* Hopefully, we never reach here */
++ return NULL; /* Hopefully, we never reach here */
+ }
+
+
+--- splitvt-1.6.5.orig/vt100.c
++++ splitvt-1.6.5/vt100.c
+@@ -8,6 +8,9 @@
+ Many thanks to Matt Ostanik who wrote the ANSI Handbook.
+ */
+
++#include <unistd.h>
++#include <string.h>
++#include <stdlib.h>
+ #include <sys/types.h>
+ #ifdef HAVE_TERMIO_H
+ #include <termio.h> /* Used only for TIOCGWINSZ */
+@@ -20,6 +23,7 @@
+ #include "vt100.h"
+ #include "video.h"
+ #include "terminal.h"
++#include "splitvt.h"
+
+ #define SEP_CHAR ' ' /* Separator bar character */
+
+@@ -135,7 +139,7 @@
+ unsigned char on=NORMAL;
+
+ vt_resetattr();
+- (void) check_attr(0, win->textattr, &on);
++ (void) check_attr(0, win->textattr, (int)&on);
+ }
+
+ /* Process the ^[[X;Xm escape. Made into a separate routine to support
+@@ -683,10 +687,9 @@
+ break;
+ case 3: /* 132 char/row */
+ if ( physical.cols != 132 ) {
+- upper.cols=132;
+- lower.cols=132;
+ physical.cols=132;
+ vt_widemode(1);
++ init_vt100(0);
+ }
+ break;
+ case 4: /* Set jump scroll */
+@@ -726,11 +729,9 @@
+ break;
+ case 3: /* 80 char/row */
+ if ( physical.cols == 132 ) {
+- vt_rows_cols(terminal_type,
+- NULL, &physical.cols);
+- upper.cols=physical.cols;
+- lower.cols=physical.cols;
++ physical.cols = 80;
+ vt_widemode(0);
++ init_vt100(0);
+ }
+ break;
+ case 4: /* Set smooth scroll */
+@@ -843,7 +844,8 @@
+
+ static int setup_vt100 = 0; /* Have we initialized the vt100 system? */
+
+-char *init_vt100()
++char *init_vt100(reread_tsize)
++int reread_tsize;
+ {
+ #ifdef TIOCGWINSZ
+ struct /* winsize */ {
+@@ -853,7 +855,7 @@
+ unsigned short ws_ypixel; /* vertical size - not used */
+ } mywinz;
+ #endif
+- int i, **videomem, oldrows, newrows, newcols;
++ int i, **videomem, oldrows = 0, newrows, newcols;
+ position newpos;
+ char *ptr, *errmesg;
+
+@@ -869,18 +871,22 @@
+ vt_initsel();
+ }
+
++ if (reread_tsize)
++ {
+ #ifdef TIOCGWINSZ
+- if ( ioctl(0, TIOCGWINSZ, &mywinz) == 0 ) {
+- if ( mywinz.ws_row )
+- physical.rows=mywinz.ws_row;
+- if ( mywinz.ws_col )
+- physical.cols=mywinz.ws_col;
+- }
++ if ( ioctl(0, TIOCGWINSZ, &mywinz) == 0 ) {
++ if ( mywinz.ws_row )
++ physical.rows=mywinz.ws_row;
++ if ( mywinz.ws_col )
++ physical.cols=mywinz.ws_col;
++ }
+ #endif
+- if ( (ptr=(char *)getenv("LINES")) != NULL )
+- physical.rows=atoi(ptr);
+- if ( (ptr=(char *)getenv("COLUMNS")) != NULL )
+- physical.cols=atoi(ptr);
++
++ if ( (ptr=(char *)getenv("LINES")) != NULL )
++ physical.rows=atoi(ptr);
++ if ( (ptr=(char *)getenv("COLUMNS")) != NULL )
++ physical.cols=atoi(ptr);
++ }
+
+ /* Now set defaults if we can't find the window size */
+ if ( ! physical.rows ) physical.rows=24;
+@@ -892,19 +898,21 @@
+ if ( physical.rows < 7 )
+ return("Screen is not tall enough to split.");
+
+- /* If physical.cols has been set to 132, assume we are on a
+- vt100 wide terminal, and set 132 column mode. Note that
+- setting COLUMNS in the environment will override termcap */
+- if ( physical.cols == 132 )
+- vt_widemode(1);
++ if ( ! setup_vt100 ) {
++ /* If physical.cols has been set to 132, assume we are on a
++ vt100 wide terminal, and set 132 column mode. Note that
++ setting COLUMNS in the environment will override termcap */
++ if ( physical.cols == 132 )
++ vt_widemode(1);
++ }
+
+ /* Set the exportable variables */
+ if ( UU_lines ) {
+ /* Check the user set # of lines */
+- if ( UU_lines > (physical.rows-1-3) )
+- LU_lines=(physical.rows-1-3);
+- else if ( UU_lines < 3 )
+- LU_lines=3;
++ if ( UU_lines > (physical.rows-1-3+(2*force_height)) )
++ LU_lines=(physical.rows-1-3+(2*force_height));
++ else if ( UU_lines < 3 - (2*force_height))
++ LU_lines=3 - (2*force_height);
+ else
+ LU_lines=UU_lines;
+
+--- splitvt-1.6.5.orig/splitvt.h
++++ splitvt-1.6.5/splitvt.h
+@@ -34,3 +34,25 @@
+
+ /* Functions exported from splitvt.c */
+ extern void reset_bar();
++
++/* If set, allow resizing to less than 3 lines */
++extern int force_height;
++
++void tokenize(char *array[], int size, char *line, char *tokens);
++void d_copy(register char *src, register char *dst, register int len);
++int tty_getmode(int fd);
++int tty_raw(int fd);
++int tty_reset(int fd);
++int tty_sane(int fd);
++int remove_me(void);
++int pty_open(char *argv[], int *childpid, int win);
++int addutmp(char *user, int uid, char *tty);
++char *vt_setsel(char *buf, int len, int startx, int endx, int starty, int endy);
++int delutmp(char *user, char *tty);
++int replace_me(void);
++void pty_setwin(int fd, int win);
++int check_attr(int pixel, int lastattr, int currattr);
++void d_zero(register char *dst, register int len);
++void vt_initsel(void);
++int vttest(void);
++int safe_pclose(FILE *pipefp);
+--- splitvt-1.6.5.orig/splitvt.1
++++ splitvt-1.6.5/splitvt.1
+@@ -47,6 +47,11 @@
+ Suppresses loading your ~/.splitvtrc
+ .TP
+ .TB
++.I -f
++Allow setting the height of either the top or the bottom window to less than
++3 lines.
++.TP
++.TB
+ .I -v
+ Print out the version number of splitvt
+ .LP
+@@ -173,7 +178,7 @@
+ splitvt will attempt to erase the current utmp entry, and replace it
+ with entries for the two windows. This allows you to use programs
+ such as 'talk' within the splitvt windows. If you do not have write
+-permission to the /etc/utmp file, you will not be able to modify the
++permission to the /var/run/utmp file, you will not be able to modify the
+ utmp entries.
+
+ splitvt can be made set-uid root. splitvt will reset its user id to
+--- splitvt-1.6.5.orig/splitvt-1.6.4.lsm
++++ splitvt-1.6.5/splitvt-1.6.4.lsm
+@@ -0,0 +1,15 @@
++Begin3
++Title: Splitvt - a split windows utility
++Version: 1.6.4
++Entered-date: 03JUN2000
++Description: A utility to split a vt100 compatible screen into two halfs,
++ upper and lower, and run a different program simultaneously
++ in each half.
++Keywords: screen vt100 emulator
++Author: slouken@devolution.com (Sam Lantinga)
++Maintained-by: slouken@devolution.com (Sam Lantinga)
++Primary-site: http://www.devolution.com/~slouken/projects/splitvt/
++Alternate-site: sunsite.unc.edu /pub/Linux/utils/terminal
++Platform: UNIX
++Copying-policy: GPL
++End
+--- splitvt-1.6.5.orig/utmp.c
++++ splitvt-1.6.5/utmp.c
+@@ -1,21 +1,27 @@
+
+ /* utmp.c Shareware Copyright by Sam Lantinga 10/6/93 */
+
++#include <unistd.h>
+ #include <sys/types.h>
+ #include <sys/stat.h>
+ #include <fcntl.h>
+ #include <utmp.h>
+ #include <stdio.h>
++#include <string.h>
++#include <time.h>
++#include "splitvt.h"
+
+ #ifdef DEBUG_UTMP
+ #undef UTMP_FILE
+ #define UTMP_FILE "/tmp/utmp"
+ #else
+ #ifndef UTMP_FILE
+-#define UTMP_FILE "/etc/utmp"
++#define UTMP_FILE "/var/run/utmp"
+ #endif /* UTMP_FILE */
+ #endif /* DEBUG_UTMP */
+
++int get_utmp(char *tty, struct utmp *save);
++int set_utmp(char *tty, struct utmp *save);
+
+ /* Remove us from the utmp file, saving our entry to replace later */
+
+@@ -94,7 +100,7 @@
+ if (strncmp(ttyptr, ut.ut_line, sizeof(ut.ut_line)) == 0) {
+ /* Break out; we've found our entry! */
+ if ( save )
+- d_copy((char *)&ut, save, sizeof(ut));
++ d_copy((char *)&ut, (char *)&save, sizeof(ut));
+ close(fd);
+ return(0);
+ }
+@@ -158,7 +164,9 @@
+ int uid; /* The uid corresponding to user */
+ char *tty; /* /dev/ttyxx */
+ {
++#if !defined(SOLARIS) && !defined(IRIX) && !defined(__GLIBC__)
+ struct stat sb;
++#endif
+ struct utmp ut;
+ char *ttyptr;
+
+@@ -195,12 +203,13 @@
+ #endif
+ (void) time(&ut.ut_time);
+
+-#if !defined(SOLARIS) && !defined(IRIX)
+- /* Solaris and Irix machines do this automatically */
++#if !defined(SOLARIS) && !defined(IRIX) && !defined(__GLIBC__)
++ /* Solaris and Irix and GLIBC machines do this automatically */
+ /* Change the ownership and mode of the tty */
+ if ( stat(tty, &sb) == 0 ) {
+ (void) chmod(tty, 0620); /* crw--w---- */
+ (void) chown(tty, uid, sb.st_gid);
++
+ }
+ #endif
+ return(set_utmp(tty, &ut));
+--- splitvt-1.6.5.orig/lock.c
++++ splitvt-1.6.5/lock.c
+@@ -1,9 +1,13 @@
+
+ /* The screen locking module for splitvt */
+
++#include <unistd.h>
++#include <sys/types.h>
++#include <string.h>
+ #include <stdio.h>
+ #include <pwd.h>
+ #include "vt100.h"
++#include "splitvt.h"
+
+ #define UNLOCKED 0
+ #define ENTERED1 1
+--- splitvt-1.6.5.orig/vttest.c
++++ splitvt-1.6.5/vttest.c
+@@ -12,6 +12,7 @@
+ -Sam Lantinga (slouken@toadflax.cs.ucdavis.edu)
+ */
+
++#include <unistd.h>
+ #include <sys/types.h>
+ #include <stdio.h>
+ #include <fcntl.h>
+@@ -48,9 +49,12 @@
+ int vttest()
+ {
+ char buff[512];
+- int x=0, w, rc=0, fd;
++ int x=0, rc=0, fd;
+ struct termio ttold, ttraw;
+
++ /* Disabled since at least on sparc it causes a hang. */
++ return 1;
++
+ /* Set the terminal in a raw mode */
+ if ( (fd=open("/dev/tty", O_RDWR, 0666)) < 0 )
+ return(0);
+--- splitvt-1.6.5.orig/vtmouse.c
++++ splitvt-1.6.5/vtmouse.c
+@@ -7,8 +7,11 @@
+
+ #define SPLITVT_SOURCE
+
++#include <string.h>
++#include <stdlib.h>
+ #include <stdio.h>
+ #include "vtmouse.h"
++#include "splitvt.h"
+
+ extern FILE *safe_popen(); /* From misc.c */
+
+--- splitvt-1.6.5.orig/videomem.c
++++ splitvt-1.6.5/videomem.c
+@@ -1,6 +1,7 @@
+
+ /* This file holds the functions for manipulating video memory */
+
++#include <stdlib.h>
+ #include <stdio.h>
+ #include "video.h"
+ #include "terminal.h"
+@@ -113,7 +114,7 @@
+ int x1, x2;
+ int y1, y2;
+ {
+- int l=0, i, j, eol, eos;
++ int l=0, i, j, eol, eos=0;
+
+ --maxlen; /* Account for trailing null */
+ for ( i=(x1-1); (i<x2 && l<maxlen); ++i ) {
+@@ -319,7 +320,7 @@
+ void paint_video(win)
+ window *win;
+ {
+- unsigned char change, on=NORMAL;
++ unsigned char on=NORMAL;
+ int i, j, oldattr=0;
+
+ vt_setscroll(0,0);
+--- splitvt-1.6.5.orig/vtmouse.h
++++ splitvt-1.6.5/vtmouse.h
+@@ -39,5 +39,7 @@
+ extern int event_getc();
+ extern void event_quit();
+
++#if 0
++/* this is broken for gcc 4.0, so comment it out */
+ extern FILE *xt_input, *xt_output; /* Usually untouched */
+-
++#endif
+--- splitvt-1.6.5.orig/terminal.c
++++ splitvt-1.6.5/terminal.c
+@@ -4,8 +4,11 @@
+ actually write to the terminal.
+ */
+
+-
++#include <curses.h>
++#include <term.h>
+ #include <stdio.h>
++#include <string.h>
++#include "splitvt.h"
+ #include "video.h"
+ #include "terminal.h"
+
+@@ -125,7 +128,7 @@
+ }
+ return(NULL);
+ }
+-void outc(c) int c; { putchar(c); }
++int outc(c) int c; { return putchar(c); }
+
+ void vt_rows_cols(termtype, rows, cols)
+ char *termtype;
+--- splitvt-1.6.5.orig/misc.c
++++ splitvt-1.6.5/misc.c
+@@ -1,10 +1,17 @@
+ /* Miscellaneous system dependent routines for splitsh */
+
++#define _GNU_SOURCE /* for getpt and other gnu extensions to libc */
++
+ #include <sys/types.h>
++#include <sys/wait.h>
++#include <unistd.h>
++#include <stdlib.h>
+ #include <sys/stat.h>
+ #include <fcntl.h>
+ #include <stdio.h>
+ #include <signal.h>
++#include <utime.h>
++#include <string.h>
+
+
+ #ifdef HAVE_TERMIO_H
+@@ -24,6 +31,8 @@
+ /*#define STTY_HACK*/
+ #endif
+
++int tty_reset(int fd);
++
+ /*
+ * Initialize a pty, fork a command running under it, and then
+ * return the master file descriptor
+@@ -44,7 +53,10 @@
+ int get_master_pty(), get_slave_pty();
+ char *get_ttyname(), *myputenv();
+
+- char LINES[12], COLUMNS[12], SPLITVT[24];
++#ifndef TIOCGWINSZ
++ char LINES[12], COLUMNS[12];
++#endif
++ char SPLITVT[24];
+ int returnfd, slave_fd;
+
+ /* Get the master pty file descriptor */
+@@ -106,6 +118,8 @@
+ /* "touch" the tty so 'w' reports proper idle times */
+ (void) utime(get_ttyname(), NULL);
+
++ /* Set our gid to our real gid if necessary */
++ (void) setgid(getgid());
+ /* Set our uid to our real uid if necessary */
+ (void) setuid(getuid());
+
+@@ -182,12 +196,18 @@
+ #else /* ! IRIX */
+
+
+-#ifdef SOLARIS /* System V.4 pty routines from W. Richard Stevens */
++#if defined(SOLARIS) || defined(__GLIBC__)
++/* System V.4 pty routines from W. Richard Stevens */
++/* GLIBC is very similar, so this will handle it too. */
++
++#ifdef SOLARIS
+
+ #include <stropts.h>
+
+ #define DEV_CLONE "/dev/ptmx"
+
++#endif
++
+ extern char *ptsname();
+
+ int get_master_pty()
+@@ -195,9 +215,14 @@
+
+ char *ttyptr;
+
++#ifdef SOLARIS
+ if ( (master_fd=open(DEV_CLONE, O_RDWR)) < 0 )
+ return(-1);
+-
++#else /* GLIBC */
++ if ( (master_fd=getpt()) == -1 )
++ return (-1);
++#endif
++
+ if ( grantpt(master_fd) < 0 ) /* grant access to slave */
+ {
+ close(master_fd);
+@@ -242,6 +267,7 @@
+ return(-1);
+ }
+
++#ifdef SOLARIS
+ if ( ioctl(slave_fd, I_PUSH, "ptem") < 0 )
+ {
+ close(master_fd);
+@@ -262,7 +288,8 @@
+ close(slave_fd);
+ return(-1);
+ }
+-
++#endif
++
+ return(slave_fd);
+ }
+
+@@ -393,8 +420,10 @@
+
+ void dropctty()
+ {
++#ifndef CIBAUD
+ int fd;
+-
++#endif
++
+ #if defined(_POSIX_SOURCE) || defined(SOLARIS) || \
+ defined(__386BSD__) || defined(__FreeBSD__)
+ setsid(); /* The POSIX solution is simple. :) */
+@@ -708,7 +737,6 @@
+ extern char **environ; /* The process environment strings */
+
+ char *newptr, **envptr;
+- char *tmptr, temp[BUFSIZ];
+ int distance, n=0;
+
+ for ( distance=0; ((*(string+distance)) &&
+@@ -759,7 +787,7 @@
+ char *line;
+ char *tokens;
+ {
+- char *head, *ptr;
++ char *head;
+ int i=0;
+
+ for ( head=line; *line && i < size-2; ) {
+@@ -847,7 +875,7 @@
+ {
+ char *argv[4];
+ int pipe_fds[2];
+- int rw, child;
++ int rw;
+
+ if ( strcmp(type, "r") == 0 )
+ rw=0; /* READ access for parent */