5 files changed, 197 insertions, 0 deletions
diff --git a/source/a/mcelog/doinst.sh b/source/a/mcelog/doinst.sh
new file mode 100644
index 000000000..fd9d549aa
--- /dev/null
+++ b/source/a/mcelog/doinst.sh
@@ -0,0 +1,24 @@
+#!/bin/sh
+config() {
+  NEW="$1"
+  OLD="`dirname $NEW`/`basename $NEW .new`"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+# Keep same perms on rc.mcelog.new:
+if [ -e etc/rc.d/rc.mcelog ]; then
+  cp -a etc/rc.d/rc.mcelog etc/rc.d/rc.mcelog.new.incoming
+  cat etc/rc.d/rc.mcelog.new > etc/rc.d/rc.mcelog.new.incoming
+  mv etc/rc.d/rc.mcelog.new.incoming etc/rc.d/rc.mcelog.new
+fi
+
+config etc/logrotate.d/mcelog.new
+config etc/mcelog/mcelog.conf.new
+config etc/rc.d/rc.mcelog.new
+
diff --git a/source/a/mcelog/mcelog-1.0pre3.tar.bz2.sign b/source/a/mcelog/mcelog-1.0pre3.tar.bz2.sign
new file mode 100644
index 000000000..1f9c73a47
--- /dev/null
+++ b/source/a/mcelog/mcelog-1.0pre3.tar.bz2.sign
@@ -0,0 +1,8 @@
+-----BEGIN PGP SIGNATURE-----
+Version: GnuPG v1.4.9 (GNU/Linux)
+Comment: See http://www.kernel.org/signature.html for info
+
+iD8DBQBLV9g/yGugalF9Dw4RAlheAJ4t2DqUZX1ySR3QH8RdVHLYyePHawCcC/Ct
+N94+oQu1HHumOx0V6Ft+2Fo=
+=eEE6
+-----END PGP SIGNATURE-----
diff --git a/source/a/mcelog/mcelog.SlackBuild b/source/a/mcelog/mcelog.SlackBuild
new file mode 100755
index 000000000..0a461cd80
--- /dev/null
+++ b/source/a/mcelog/mcelog.SlackBuild
@@ -0,0 +1,90 @@
+
+#!/bin/sh
+
+# Copyright 2010  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+PKGNAM=mcelog
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.bz2 | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) export ARCH=i486 ;;
+    arm*) export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) export ARCH=$( uname -m ) ;;
+  esac
+fi
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.bz2 || exit 1
+cd $PKGNAM-$VERSION
+
+zcat $CWD/mcelog.init.diff.gz | patch -p1 --verbose || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+make $NUMJOBS || make || exit 1
+
+mkdir -p $PKG/etc/mcelog $PKG/usr/sbin $PKG/usr/man/man8
+install -m 755 -p mcelog $PKG/usr/sbin/mcelog
+install -m 644 -p mcelog.8 $PKG/usr/man/man8
+gzip -9 $PKG/usr/man/man8/mcelog.8
+install -m 644 -p -b mcelog.conf $PKG/etc/mcelog/mcelog.conf.new
+for i in cache-error-trigger dimm-error-trigger page-error-trigger socket-memory-error-trigger ; do
+  install -m 755 -p -b triggers/$i $PKG/etc/mcelog
+done
+
+mkdir -p $PKG/etc/rc.d
+install -m 755 -p mcelog.init $PKG/etc/rc.d/rc.mcelog.new
+
+mkdir -p $PKG/etc/logrotate.d
+install -m 644 -p mcelog.logrotate $PKG/etc/logrotate.d/mcelog.new
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  CHANGES README* TODO* *.pdf \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+mkdir -p $PKG/install
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/a/mcelog/mcelog.init.diff b/source/a/mcelog/mcelog.init.diff
new file mode 100644
index 000000000..cc2eee96b
--- /dev/null
+++ b/source/a/mcelog/mcelog.init.diff
@@ -0,0 +1,56 @@
+--- ./mcelog.init.orig	2010-01-20 20:36:52.000000000 -0600
++++ ./mcelog.init	2010-09-27 17:23:24.964394022 -0500
+@@ -2,11 +2,6 @@
+ # 
+ # Startup script for mcelog
+ # 
+-# This should be customized for distribution standards
+-# (using rc_status etc.)
+-# The paths are hardcoded and are not automatically adjusted
+-# for different prefix
+-#
+ ### BEGIN INIT INFO
+ # Provides:		mcelog 
+ # Default-Start:	3 5
+@@ -16,8 +11,6 @@
+ #                       This logs and handles CPU hardware errors on x86 systems.
+ ### END INIT INFO
+ 
+-# put this is sysconfig
+-
+ # mcelog mode
+ # valid values: daemon, trigger, cron
+ # Recommended value daemon
+@@ -52,8 +45,8 @@
+ case "$1" in
+ start)
+ 	if [ "$MCELOG_MODE" = "daemon" ] ; then
+-		echo "Starting mcelog daemon"
+-		startproc $MCELOG --daemon $MCELOG_OPTIONS
++		echo "Starting mcelog daemon:  $MCELOG --daemon $MCELOG_OPTIONS"
++		$MCELOG --daemon $MCELOG_OPTIONS
+ 	elif [ -f "$TRIGGER" ] ; then
+ 		echo $MCELOG > "$TRIGGER"
+ 	else
+@@ -62,8 +55,8 @@
+ 	;;
+ stop)
+ 	if [ "$MCELOG_MODE" = "daemon" ] ; then
+-		echo "Stopping mcelog"
+-		killproc -TERM $MCELOG
++		echo "Stopping mcelog daemon:  killall -TERM $MCELOG"
++		killall -TERM $MCELOG
+ 	elif [ "$MCELOG_MODE" = "trigger" -a -f "$TRIGGER" ]; then 
+ 		echo "" > "$TRIGGER"
+ 	else
+@@ -85,8 +78,8 @@
+ 	;;
+ status)
+ 	if [ "$MCELOG_MODE" = "daemon" ] ; then
+-		echo "Checking for mcelog"
+-		checkproc $MCELOG
++		echo "Checking for mcelog:"
++		ps ax | grep $MCELOG | cut -f 1 -d ' '
+ 	fi
+ 	;;
+ *)
diff --git a/source/a/mcelog/slack-desc b/source/a/mcelog/slack-desc
new file mode 100644
index 000000000..0948e2687
--- /dev/null
+++ b/source/a/mcelog/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+      |-----handy-ruler------------------------------------------------------|
+mcelog: mcelog (Machine Check Event logger)
+mcelog:
+mcelog: mcelog is the user space backend for logging machine check errors
+mcelog: reported by the hardware to the kernel.  The kernel does the immediate
+mcelog: actions (like killing processes etc.) and mcelog decodes the logs the
+mcelog: errors.  It primarily handles machine checks and thermal events, which
+mcelog: are reported for errors detected by the CPU.  It is recommended that
+mcelog: mcelog runs on all x86 machines, both 64-bit and 32bit.
+mcelog:
+mcelog: mcelog home:  ftp://ftp.kernel.org:/pub/linux/utils/cpu/mce
+mcelog: