4 files changed, 203 insertions, 0 deletions
diff --git a/source/a/less/less.SlackBuild b/source/a/less/less.SlackBuild
new file mode 100755
index 000000000..643359571
--- /dev/null
+++ b/source/a/less/less.SlackBuild
@@ -0,0 +1,102 @@
+#!/bin/sh
+
+# Copyright 2005-2009  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-less
+
+VERSION=${VERSION:-418}
+ARCH=${ARCH:-x86_64}
+BUILD=${BUILD:-3}
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+if [ "$ARCH" = "i386" ]; then
+  SLKCFLAGS="-O2 -march=i386 -mcpu=i686"
+elif [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+elif [ "$ARCH" = "arm" ]; then
+  SLKCFLAGS="-O2 -march=armv4 -mtune=xscale"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "armel" ]; then
+  SLKCFLAGS="-O2 -march=armv4t"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf less-$VERSION
+tar xvf $CWD/less-$VERSION.tar.bz2 || exit 1
+cd less-$VERSION
+zcat $CWD/less.sysconfdir.diff.gz | patch -p1 --verbose || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --sysconfdir=/etc \
+  --mandir=/usr/man
+
+make $NUMJOBS || make || exit 1
+
+mkdir -p $PKG/usr/bin
+cat less > $PKG/usr/bin/less
+cat lesskey > $PKG/usr/bin/lesskey
+cat lessecho > $PKG/usr/bin/lessecho
+zcat $CWD/lesspipe.sh.gz > $PKG/usr/bin/lesspipe.sh
+chmod 755 $PKG/usr/bin/*
+
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+mkdir -p $PKG/usr/doc/less-$VERSION
+cp -a \
+  COPYING* LICENSE README NEWS \
+  $PKG/usr/doc/less-$VERSION
+
+mkdir -p $PKG/usr/man/man1
+for page in less.nro lesskey.nro ; do
+  cat $page | gzip -9c > $PKG/usr/man/man1/`basename $page .nro`.1.gz
+done
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+# Build the package:
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/less-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/a/less/less.sysconfdir.diff b/source/a/less/less.sysconfdir.diff
new file mode 100644
index 000000000..25c5bb584
--- /dev/null
+++ b/source/a/less/less.sysconfdir.diff
@@ -0,0 +1,15 @@
+--- ./less.nro.orig	Mon May 27 17:14:24 2002
++++ ./less.nro	Mon May 27 17:14:46 2002
+@@ -947,10 +947,10 @@
+ Otherwise,
+ .I less 
+ looks in a standard place for the system-wide lesskey file:
+-On Unix systems, the system-wide lesskey file is /usr/local/etc/sysless.
++On Unix systems, the system-wide lesskey file is /etc/sysless.
+ (However, if 
+ .I less 
+-was built with a different sysconf directory than /usr/local/etc,
++was built with a different sysconf directory than /etc,
+ that directory is where the sysless file is found.)
+ On MS-DOS and Windows systems, the system-wide lesskey file is c:\\_sysless.
+ On OS/2 systems, the system-wide lesskey file is c:\\sysless.ini.
diff --git a/source/a/less/lesspipe.sh b/source/a/less/lesspipe.sh
new file mode 100644
index 000000000..2d660522d
--- /dev/null
+++ b/source/a/less/lesspipe.sh
@@ -0,0 +1,67 @@
+#!/bin/sh
+#
+# Copyright 1997, 1998, 1999, 2000  Patrick Volkerding, Moorhead, MN, USA
+# Copyright 2001, 2002  Slackware Linux, Inc, Concord, CA, USA
+# Copyright 2006, 2009  Patrick Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+
+# This is a preprocessor for 'less'.  It is used when this environment
+# variable is set:   LESSOPEN="|lesspipe.sh %s"
+
+lesspipe() {
+  case "$1" in
+  *.tar) tar tvvf "$1" 2>/dev/null ;;
+  *.tgz | *.tar.gz | *.tar.Z | *.tar.z | *.tar.bz2 | *.tbz ) tar tvvf "$1" 2>/dev/null ;;
+  *.tlz | *.tar.lzma ) lzma -dc "$1" 2> /dev/null | tar tvvf - 2> /dev/null ;;
+  *.txz | *.tar.xz ) xz -dc "$1" 2> /dev/null | tar tvvf - 2> /dev/null ;;
+  *.zip) unzip -l "$1" 2>/dev/null ;;
+  *.rpm) rpm -qpvl "$1" 2>/dev/null ;;
+  *.rar) # check if rar is installed first
+    if which rar 1> /dev/null ; then
+      `which rar` t "$1" 
+    fi ;;
+  *.1|*.2|*.3|*.4|*.5|*.6|*.7|*.8|*.9|*.n|*.man) # *roff src?
+    if file -L "$1" | grep roff 1> /dev/null ; then
+      nroff -S -mandoc "$1"
+    fi ;;
+  *.1.gz|*.2.gz|*.3.gz|*.4.gz|*.5.gz|*.6.gz|*.7.gz|*.8.gz|*.9.gz|*.n.gz|*.man.gz) # compressed *roff src?
+    if gzip -dc "$1" | file - | grep roff 1> /dev/null ; then
+      gzip -dc "$1" | nroff -S -mandoc -
+    fi ;;
+  *.1.bz2|*.2.bz2|*.3.bz2|*.4.bz2|*.5.bz2|*.6.bz2|*.7.bz2|*.8.bz2|*.9.bz2|*.n.bz2|*.man.bz2) # compressed *roff src?
+    if bzip2 -dc "$1" | file - | grep roff 1> /dev/null ; then
+      bzip2 -dc "$1" | nroff -S -mandoc -
+    fi ;;
+  *.gz) gzip -dc "$1"  2>/dev/null ;;
+  *.bz2) bzip2 -dc "$1" 2>/dev/null ;;
+  *.lzma) lzma -dc "$1" 2>/dev/null ;;
+  *.xz) xz -dc "$1" 2>/dev/null ;;
+#  *) FILE=`file -L "$1"` ; # Check to see if binary, if so -- view with 'strings'
+#    FILE1=`echo $FILE | cut -d ' ' -f 2`
+#    FILE2=`echo $FILE | cut -d ' ' -f 3`
+#    if [ "$FILE1" = "Linux/i386" -o "$FILE2" = "Linux/i386" \
+#         -o "$FILE1" = "ELF" -o "$FILE2" = "ELF" ]; then
+#      strings "$1"
+#    fi ;;
+  esac
+}
+
+lesspipe "$1"
diff --git a/source/a/less/slack-desc b/source/a/less/slack-desc
new file mode 100644
index 000000000..bbf440f9a
--- /dev/null
+++ b/source/a/less/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+    |-----handy-ruler------------------------------------------------------|
+less: less (file pager)
+less:
+less: Less is a paginator similar to more (1), but which allows backward
+less: movement in the file as well as forward movement. Also, less does not
+less: have to read the entire input file before starting, so with large
+less: input files it starts up faster than text editors like vi (1). 
+less:
+less: Less was written by Mark Nudelman.
+less:
+less:
+less: