diff options
Diffstat (limited to 'source/a/eudev/eudev.SlackBuild')
| -rwxr-xr-x | source/a/eudev/eudev.SlackBuild | 161 |
1 files changed, 161 insertions, 0 deletions
diff --git a/source/a/eudev/eudev.SlackBuild b/source/a/eudev/eudev.SlackBuild new file mode 100755 index 000000000..c82107f45 --- /dev/null +++ b/source/a/eudev/eudev.SlackBuild @@ -0,0 +1,161 @@ +#!/bin/sh + +# Copyright 2006, 2008, 2009, 2010, 2011, 2012, 2013, 2015 Patrick J. Volkerding, Sebeka, MN, USA +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +VERSION=${VERSION:-$(echo eudev-*.tar.* | cut -d - -f 2 | rev | cut -f 3- -d . | rev)} +BUILD=${BUILD:-8} + +NUMJOBS=${NUMJOBS:-" -j7 "} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i586 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +if [ "$ARCH" = "x86_64" ]; then + LIBDIRSUFFIX="64" +else + LIBDIRSUFFIX="" +fi + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-eudev + +rm -rf $PKG +mkdir -p $TMP $PKG/lib/udev +cd $TMP +rm -rf eudev-$VERSION +tar xvf $CWD/eudev-$VERSION.tar.xz || exit 1 +cd eudev-$VERSION || exit 1 +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +# Patch 60-cdrom_id.rules to create a full set of symlinks: +zcat $CWD/60-cdrom_id.rules.diff.gz | patch -p1 --verbose || exit 1 + +zcat $CWD/0001-Remove-obsolete-udev_root-references.patch.gz | patch -p1 --verbose || exit 1 +zcat $CWD/0002-src-udev-udevd.c-add-eudev-startup-message-for-kmsg.patch.gz | patch -p1 --verbose || exit 1 + +./configure \ + --prefix=/usr \ + --with-rootprefix=/ \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --with-rootlibdir=/lib${LIBDIRSUFFIX} \ + --with-rootrundir=/run \ + --with-rootlibexecdir=/lib/udev \ + --sysconfdir=/etc \ + --bindir=/sbin \ + --sbindir=/sbin \ + --libexecdir=/lib \ + --enable-introspection \ + --enable-hwdb \ + --enable-manpages \ + --mandir=/usr/man \ + --docdir=/usr/doc/eudev-$VERSION \ + --disable-static \ + --enable-rule_generator \ + --enable-split-usr \ + --build=$ARCH-slackware-linux || exit 1 + +make $NUMJOBS || make || exit 1 +make install DESTDIR=$PKG || exit 1 + +find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ + | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true + +# scsi_id is needed by multipath +( cd $PKG/sbin ; ln -s ../lib/udev/scsi_id scsi_id ) + +# Move system installed hwdb files under /lib: +mkdir -p $PKG/lib/udev/hwdb.d +mv $PKG/etc/udev/hwdb.d/* $PKG/lib/udev/hwdb.d + +mkdir -p \ + $PKG/run \ + $PKG/{etc,lib}/modprobe.d \ + $PKG/etc/rc.d \ + $PKG/etc/udev/rules.d \ + $PKG/lib/firmware + +# Yes, this will clobber existing config files. +cp -a $CWD/config/udev.conf $PKG/etc/udev/udev.conf + +# Copy Slackware custom rules: +cp -a $CWD/config/rules.d/* $PKG/lib/udev/rules.d/ + +# Now the init script and kmod stuff: +cp -a $CWD/config/rc.d/rc.udev.new $PKG/etc/rc.d/rc.udev.new +cp -a $CWD/config/modprobe.d/*.conf $PKG/lib/modprobe.d/ +cp -a $CWD/config/modprobe.d/README $PKG/etc/modprobe.d/ + +chown -R root:root $PKG/etc $PKG/lib/modprobe.d +find $PKG/etc $PKG/lib/modprobe.d -type f -exec chmod 644 {} \; +find $PKG/etc -type d -exec chmod 755 {} \; +chmod 0755 $PKG/etc/rc.d/rc.udev.new + +# Add extra device nodes to the package that udev doesn't make: +mkdir -p $PKG/lib/udev/devices +if [ -r $CWD/udev-fixed-devices.tar.gz ]; then + tar xvf $CWD/udev-fixed-devices.tar.gz -C $PKG +fi + +# Support locally added additional devices found in this directory: +mkdir -p $PKG/etc/udev/devices + +chown -R root:root $PKG/lib/udev +chmod 0755 $PKG/lib/udev/* + +mkdir -p $PKG/usr/doc/eudev-$VERSION +cp -a \ + COPYING* README* TODO \ + $PKG/usr/doc/eudev-$VERSION + +# Compress and fix manpage symlinks: +if [ -d $PKG/usr/man ]; then + ( cd $PKG/usr/man + for manpagedir in $(find . -type d -name "man*") ; do + ( cd $manpagedir + for eachpage in $( find . -type l -maxdepth 1) ; do + ln -s $( readlink $eachpage ).gz $eachpage.gz + rm $eachpage + done + gzip -9 *.? + ) + done + ) +fi + +mkdir -p $PKG/install +zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh +cat $CWD/slack-desc > $PKG/install/slack-desc + +cd $PKG +/sbin/makepkg -l y -c y $TMP/eudev-$VERSION-$ARCH-$BUILD.txz |