diff options
Diffstat (limited to 'source/a/device-mapper')
| -rw-r--r-- | source/a/device-mapper/64-device-mapper.rules | 37 | ||||
| -rwxr-xr-x | source/a/device-mapper/device-mapper.SlackBuild | 115 | ||||
| -rw-r--r-- | source/a/device-mapper/slack-desc | 20 |
3 files changed, 0 insertions, 172 deletions
diff --git a/source/a/device-mapper/64-device-mapper.rules b/source/a/device-mapper/64-device-mapper.rules deleted file mode 100644 index 7e9a235db..000000000 --- a/source/a/device-mapper/64-device-mapper.rules +++ /dev/null @@ -1,37 +0,0 @@ -# device mapper links hook into "change" events, when the dm table -# becomes available; some table-types must be ignored - -KERNEL=="device-mapper", NAME="mapper/control" - -KERNEL!="dm-*", GOTO="device_mapper_end" -ACTION!="add|change", GOTO="device_mapper_end" - -# lookup device name -# use dmsetup, until devmap_name is provided by sys-fs/device-mapper -PROGRAM=="/sbin/dmsetup -j %M -m %m --noopencount --noheadings -c -o name info", - ENV{DM_NAME}="%c" - -# do not do anything if dmsetup does not provide a name -ENV{DM_NAME}=="", NAME="", OPTIONS="ignore_device" - -# ignore luks crypt devices while not fully up -ENV{DM_NAME}=="temporary-cryptsetup-*", NAME="", OPTIONS="ignore_device" - -# use queried name -ENV{DM_NAME}=="?*", NAME="mapper/$env{DM_NAME}" - -SYMLINK+="disk/by-id/dm-name-$env{DM_NAME}" -SYMLINK+="disk/by-name/$env{DM_NAME}" - -PROGRAM!="/sbin/dmsetup status -j %M -m %m", GOTO="device_mapper_end" -ENV{DM_TYPE}="%c{3}" - -ENV{DM_TYPE}=="|*error*", GOTO="device_mapper_end" - -IMPORT{program}="vol_id --export $tempnode" -OPTIONS="link_priority=50" -ENV{DM_TYPE}=="*snapshot-origin*", OPTIONS="link_priority=60" -ENV{ID_FS_USAGE}=="filesystem|other|crypto", ENV{ID_FS_UUID_ENC}=="?*", SYMLINK+="disk/by-uuid/$env{ID_FS_UUID_ENC}" -ENV{ID_FS_USAGE}=="filesystem|other", ENV{ID_FS_LABEL_ENC}=="?*", SYMLINK+="disk/by-label/$env{ID_FS_LABEL_ENC}" - -LABEL="device_mapper_end" diff --git a/source/a/device-mapper/device-mapper.SlackBuild b/source/a/device-mapper/device-mapper.SlackBuild deleted file mode 100755 index d770deed7..000000000 --- a/source/a/device-mapper/device-mapper.SlackBuild +++ /dev/null @@ -1,115 +0,0 @@ -#!/bin/sh - -# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, Minnesota, USA -# All rights reserved. -# -# Redistribution and use of this script, with or without modification, is -# permitted provided that the following conditions are met: -# -# 1. Redistributions of this script must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED -# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO -# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, -# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; -# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR -# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF -# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -VERSION=1.02.28 -ARCH=${ARCH:-x86_64} -NUMJOBS=${NUMJOBS:-" -j7 "} -BUILD=${BUILD:-1} - -CWD=$(pwd) -TMP=${TMP:-/tmp} -PKG=$TMP/package-device-mapper - -if [ "$ARCH" = "i486" ]; then - SLKCFLAGS="-O2 -march=i486 -mtune=i686" - LIBDIRSUFFIX="" -elif [ "$ARCH" = "s390" ]; then - SLKCFLAGS="-O2" - LIBDIRSUFFIX="" -elif [ "$ARCH" = "x86_64" ]; then - SLKCFLAGS="-O2 -fPIC" - LIBDIRSUFFIX="64" -fi - -rm -rf $PKG -mkdir -p $TMP $PKG -cd $TMP -rm -rf device-mapper.$VERSION -tar xvf $CWD/device-mapper.$VERSION.tar.bz2 || exit 1 -cd device-mapper.$VERSION - -chown -R root.root . -find . \ - \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ - -exec chmod 755 {} \; -o \ - \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ - -exec chmod 644 {} \; - -CFLAGS="$SLKCFLAGS" \ -./configure \ - --libdir=/lib${LIBDIRSUFFIX} \ - --mandir=/usr/man \ - --enable-static_link \ - --enable-pkgconfig \ - --enable-dmeventd \ - --disable-selinux \ - --with-device-uid=0 \ - --with-device-gid=6 \ - --with-device-mode=0660 \ - --build=$ARCH-slackware-linux - # I tried adding --enable-compat but that failed to compile - -make $NUMJOBS || make || exit 1 -make install DESTDIR=$PKG || exit 1 - -# On x86_64 the pkgconfig files are installed to the wrong directory, but -# the .pc content is correct, so we just move them over: -if [ ! -d $PKG/usr/lib${LIBDIRSUFFIX}/pkgconfig ]; then - mkdir -p $PKG/usr/lib${LIBDIRSUFFIX} - mv $PKG/usr/lib/pkgconfig $PKG/usr/lib${LIBDIRSUFFIX}/ - rmdir $PKG/usr/lib || exit 1 -fi - -mkdir -p $PKG/lib/udev/rules.d -cat $CWD/64-device-mapper.rules > $PKG/lib/udev/rules.d/64-device-mapper.rules - -( cd $PKG - find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -) - -mkdir -p $PKG/usr/doc/device-mapper.$VERSION -cp -a \ - COPYING* INSTALL INTRO README* VERSION WHATS_NEW \ - $PKG/usr/doc/device-mapper.$VERSION - -# Compress and if needed symlink the man pages: -if [ -d $PKG/usr/man ]; then - ( cd $PKG/usr/man - for manpagedir in $(find . -type d -name "man*") ; do - ( cd $manpagedir - for eachpage in $( find . -type l -maxdepth 1) ; do - ln -s $( readlink $eachpage ).gz $eachpage.gz - rm $eachpage - done - gzip -9 *.? - ) - done - ) -fi - -mkdir -p $PKG/install -cat $CWD/slack-desc > $PKG/install/slack-desc - -cd $PKG -makepkg -l y -c n $TMP/device-mapper-$VERSION-$ARCH-$BUILD.txz - diff --git a/source/a/device-mapper/slack-desc b/source/a/device-mapper/slack-desc deleted file mode 100644 index 2708a39fb..000000000 --- a/source/a/device-mapper/slack-desc +++ /dev/null @@ -1,20 +0,0 @@ -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' on -# the right side marks the last column you can put a character in. You must make -# exactly 11 lines for the formatting to be correct. It's also customary to -# leave one space after the ':'. - - |-----handy-ruler------------------------------------------------------| -device-mapper: device-mapper (device-mapper for logical volume management) -device-mapper: -device-mapper: The goal of device-mapper is to support volume management. The -device-mapper: driver enables the definition of new block devices composed of -device-mapper: ranges of sectors of existing devices. This can be used to define -device-mapper: disk partitions or logical volumes. -device-mapper: -device-mapper: device-mapper is required by LVM2, the Logical Volume Manager. -device-mapper: -device-mapper: -device-mapper: - |