diff options
Diffstat (limited to 'CHANGES_AND_HINTS.TXT')
| -rw-r--r-- | CHANGES_AND_HINTS.TXT | 373 |
1 files changed, 373 insertions, 0 deletions
diff --git a/CHANGES_AND_HINTS.TXT b/CHANGES_AND_HINTS.TXT new file mode 100644 index 000000000..f4dbb456e --- /dev/null +++ b/CHANGES_AND_HINTS.TXT @@ -0,0 +1,373 @@ +This file documents the instructions for upgrading to Slackware 13.0, the
+packages added, removed, renamed, and/or split during the development cycle
+from Slackware 12.2 through 13.0, and some potential "gotchas" that users
+can avoid by arming themselves with a little knowledge.
+
+
+*** INSTRUCTIONS FOR UPGRADING FROM 12.2 ***
+
+Follow the instructions detailed in the UPGRADE.TXT located in this
+ directory. Note that upgrading from a Slackware version earlier
+ than 12.2 is NOT supported at all and will most likely not work.
+
+Also note that upgrading from 12.2 to 13.0 (64bit) is not supported.
+
+
+*** PACKAGE ADDITIONS SINCE 12.2 ***
+
+a/xz
+ap/cupsddk
+ap/dc3dd
+d/swig
+kde/guidance-power-manager
+kde/kaudiocreator
+kde/kdebase-runtime
+kde/kdebase-workspace
+kde/kdepimlibs
+kde/kdeplasma-addons
+kde/kdevelop
+kde/kdevplatform
+kde/konq-plugins
+kde/ktorrent (moved from /extra)
+kde/mplayerthumbs
+kde/skanlite
+l/M2Crypto
+l/PyQt
+l/QScintilla
+l/akonadi
+l/automoc4
+l/babl
+l/boost
+l/chmlib
+l/clucene
+l/djvulibre
+l/eigen2
+l/exiv2
+l/gegl
+l/gmm
+l/ilmbase
+l/iso-codes
+l/jasper
+l/libarchive
+l/libdvdread
+l/libical
+l/libmcrypt
+l/libmsn
+l/libnl
+l/libspectre
+l/libvncserver
+l/libxklavier
+l/libzip
+l/openexr
+l/phonon
+l/pil
+l/pycups
+l/qca-cyrus-sasl
+l/qca-gnupg
+l/qca-ossl
+l/qimageblitz
+l/qtscriptgenerator
+l/raptor
+l/rasqal
+l/redland
+l/seamonkey-solibs
+l/sip
+l/soprano
+l/strigi
+l/taglib-extras
+l/urwid
+n/crda
+n/iw
+n/iwlwifi-5150-ucode
+n/snownews
+x/intel-gpu-tools
+x/scim-input-pad
+x/xcb-util
+x/xorg-server-xephyr
+x/xpyb
+x/xscope
+xap/MPlayer
+xap/electricsheep
+xap/thunar-volman
+xap/xfce4-power-manager
+
+extra/kde3-compat/arts
+extra/kde3-compat/kdelibs3
+extra/kde3-compat/qca-tls1
+extra/kde3-compat/qca1
+extra/kde3-compat/qt3
+extra/xf86-video-intel-alternate/xf86-video-intel-* (several alternate
+ versions of the Xorg intel driver just in case the default doesn't work
+ properly for you)
+
+
+*** PACKAGE REMOVALS SINCE 12.2 ***
+
+kde/kdeaddons
+kde/knemo
+l/arts
+l/beecrypt
+l/dbus-qt3
+l/qca-tls
+l/svgalib_helper (won't build on 2.6.28+ kernels)
+n/bitchx
+x/liboldX
+x/xf86-input-calcomp
+x/xf86-input-digitaledge
+x/xf86-input-dmc
+x/xf86-input-dynapro
+x/xf86-input-elo2300
+x/xf86-input-jamstudio
+x/xf86-input-magellan
+x/xf86-input-magictouch
+x/xf86-input-microtouch
+x/xf86-input-palmax
+x/xf86-input-spaceorb
+x/xf86-input-summa
+x/xf86-input-tek4957
+x/xf86-input-ur98
+x/xf86-video-cyrix
+x/xf86-video-fbdev
+x/xf86-video-i810 (use xf86-video-intel instead)
+x/xf86-video-imstt
+x/xf86-video-nsc
+x/xf86-video-vga
+x/xf86-video-via (use xf86-video-openchrome instead)
+x/xphelloworld
+x/xrx
+xap/gimp-help-2
+
+
+*** OTHER NOTABLE CHANGES AND HINTS ***
+
+l/dbus moved to a/dbus
+
+New system user accounts:
+ oprofile (uid=51)
+
+New system group accounts:
+ oprofile (gid=51)
+ dialout (gid=16)
+ netdev (gid=86)
+
+The Slackware installer now uses udev to initialize your hardware, including
+ the network interface card(s). This has positive consequences for network
+ installations (using NFS, FTP, HTTP or SMB). You no longer have to run the
+ 'pcmcia' and 'network' scripts prior to running 'setup' - the network
+ interface will be created and intialized by udev. If a DHCP server is
+ found on your local network, the setup program will let you choose between
+ automatic configuration of your network interface using DHCP or specifying
+ a static IP address. Using udev, the commandline for fully unattended
+ configuration and startup of the dropbear SSH server has changed slightly.
+ Suppose you want to boot the 'hugesmp' kernel, use DHCP for interface eth0,
+ and you have a us-english keyboard layout: the commandline to auto-start
+ the SSH daemon in the installer would become:
+ hugesmp.s kbd=us nic=auto:eth0:dhcp
+ Note: if you do not want to use udev, the "auto" keyword in that example
+ commandline must be replaced with the actual name of the network module for
+ your card. If you do not want to use udev, you must add the parameter
+ "noudev" to the command line that boots the Slackware installer, and the
+ original ("old") Slackware hardware configuration scripts will be used.
+
+Use one of the provided generic kernels for daily use. Do not report
+ bugs until/unless you have reproduced them using one of the stock
+ generic kernels. You will need to create an initrd in order to boot
+ the generic kernels - see /boot/README.initrd for instructions.
+ The huge kernels are primarily intended as "installer" and "emergency"
+ kernels in case you forget to make an initrd. For most systems, you
+ should use the generic SMP kernel if it will run, even if your system is
+ not SMP-capable. Some newer hardware needs the local APIC enabled in the
+ SMP kernel, and theoretically there should not be a performance penalty
+ with using the SMP-capable kernel on a uniprocessor machine, as the SMP
+ kernel tests for this and makes necessary adjustments. Furthermore, the
+ kernel sources shipped with Slackware are configured for SMP usage, so you
+ won't have to modify those to build external modules (such as NVidia or
+ ATI proprietary drivers) if you use the SMP kernel.
+
+ If you decide to use one of the non-SMP kernels, you will need to follow the
+ instructions in /extra/linux-2.6.29.6-nosmp-sdk/README.TXT to modify your
+ kernel sources for non-SMP usage. Note that this only applies if you are
+ using the Slackware-provided non-SMP kernel - if you build a custom kernel,
+ the symlinks at /lib/modules/$(uname -r)/{build,source} will point to the
+ correct kernel source so long as you don't (re)move it.
+
+As usual, there are changes in udev packaging that need mentioning...
+ As with 12.2, the system udev rules now reside in /lib/udev/rules.d/
+ instead of /etc/udev/rules.d/ in older versions. There should never be
+ a reason to edit anything in /lib/udev/rules.d/, so if you think you have
+ a case where this is required, either you're wrong or it needs to be
+ addressed in the upstream source. However, you can override default rules
+ by placing one with an identical name inside /etc/udev/rules.d/ The rules
+ files in /etc/udev/rules.d/ are still intended to (maybe) be edited as
+ needed by local system administrators, and as such, the rules for optical
+ and network devices will still be placed there.
+ Also, be sure to have the new dialout group added to your system, or udev
+ will kindly remind you in the system logs...
+
+Due to the upgrade of kde from 3.5.10 to 4.2.4, you will need to move your
+ existing $HOME/.kde/ out of the way (either completely remove it or back
+ it up somewhere else if you think you might need it again for whatever
+ reason); otherwise, you will almost surely experience odd configuration
+ problems with kde applications.
+
+If mailto: links don't work properly (or at all) in firefox, you may have
+ to remove an existing $HOME/.mozilla/mimeTypes.rdf file and restart Firefox.
+
+If you are unable to access the cups configuration web interface from your
+ browser, you may have to blacklist the ipv6 module and reboot. This is
+ not an acceptable solution, of course, but it's the only one we have at
+ the moment.
+
+HP multifunction printer/scanners require that your user account be a member
+ of the "lp" group for hp-toolbox to work properly, and to use the scanner
+ portion of some (all?) units, you'll need to be a member of the "lp" group.
+ This is because hplip's udev rules set the device with group "lp" ownership.
+
+HAL is not new anymore, but here are a few notes related to it:
+ 1. User accounts with permission to mount removable devices must be in at
+ least the "plugdev" group.
+ 2. User accounts with permission to do power-management tasks, such as
+ suspend, hibernate, reboot, and shutdown, via HAL methods should be in
+ the "power" group.
+ 3. HAL will honor settings in /etc/fstab if a device is present there, so
+ you could technically have removable devices defined in /etc/fstab, but
+ if the fstab settings do not allow normal users to mount them (with the
+ "user" or "users" option), then HAL/dbus will not allow them to be
+ mounted either. In other words, for example, if your fstab line for the
+ cdrom/dvd drive includes the "owner" option, you will not be able to
+ mount it as a normal user.
+ 4. If you find a need for modified fdi files, those should be placed in the
+ relevant directories in /etc/hal/ instead of /usr/share/hal/
+
+If you notice Xfce's Terminal and perhaps some other applications being drawn
+ very slowly in X, then you should try explicitly disabling the Composite
+ extension in /etc/X11/xorg.conf, or set XLIB_SKIP_ARGB_VISUALS=1 in your
+ environment prior to starting X. For more information on this, see:
+ http://bugzilla.xfce.org/show_bug.cgi?id=2792
+ We've also gotten a report of some other things (such as VirtualBox) that
+ might benefit from this.
+
+Speaking of Xorg, the version of Xorg shipped with Slackware 13.0 will not
+ (in most cases) require an /etc/X11/xorg.conf file at all. Configuration of
+ input devices and such is handled by HAL, and the X server autoconfigures
+ everything else. You can still create an xorg.conf file if you wish, or you
+ can create a minimal xorg.conf with only the specific contents that you wish
+ to override (as an example, to use a binary-only video driver).
+ Due to removed drivers and other such changes, it's quite possible that your
+ old xorg.conf will not work correctly with this version of Xorg.
+
+If you need to use a non-US keyboard layout, then copy the file located at
+ /usr/share/hal/fdi/policy/10osvendor/10-keymap.fdi to /etc/hal/fdi/policy
+ and edit it to suit your needs. Have a look at the contents of that file
+ for an example and more information. If you prefer to do this the "old" way
+ using /etc/X11/xorg.conf, then you can use "X -configure" or "xorgsetup" to
+ generate an xorg.conf, then add the following lines to the "ServerFlags"
+ section to disable input device hotplugging via HAL:
+ Option "AllowEmptyInput" "false"
+ Option "AutoAddDevices" "false"
+ Option "AutoEnableDevices" "false"
+ This is also relevant if you prefer to disable HAL completely for whatever
+ reason.
+
+If you are using input hotplugging via HAL and a synaptics touchpad, then you
+ might need to copy /usr/share/hal/fdi/policy/11-x11-synaptics.fdi to
+ /etc/hal/fdi/policy/ and edit it to suit your needs. You can also use
+ synclient(1) to make changes "on the fly."
+
+If you want to try the new kernel mode setting (KMS), you don't have to
+ build a custom kernel; add this to your kernel's lilo stanza:
+ append = "i915.modeset=1"
+
+If you are using a KVM switch, you might experience problems with the mouse
+ when switching from one system to another. If so, you probably need to be
+ using the imps protocol for the psmouse driver, and that's a simple edit:
+ uncomment the following line in /etc/modprobe.d/psmouse.conf:
+ #options psmouse proto=imps
+ Next, unload and reload the psmouse module (do this as root):
+ modprobe -r psmouse ; modprobe psmouse
+
+If you have set up an encrypted root partition, you will need to have access
+ to your keyboard in order to type the passphrase. This may require you to
+ add the uhci-hcd and usbhid modules to your initrd image if you have a USB
+ keyboard. Also note that if you are using a non-US keyboard, you can use the
+ '-l' parameter to the 'mkinitrd' command in order to add support for this
+ keyboard to your initrd.
+
+If you have permission errors when attempting to burn a cdrom or dvd image,
+ such as the following:
+ /usr/bin/cdrecord: Operation not permitted. Cannot send SCSI cmd via ioctl
+ then cdrecord almost certainly needs root privileges to work correctly.
+ One potential solution is to make the cdrecord and cdrdao binaries suid root,
+ but this has possible security implications. The safest way to do that is
+ to make those binaries suid root, owned by a specific group, and executable
+ by only root and members of that group. For most people, the example below
+ will be sufficient (but adjust as desired depending on your specific needs):
+ chown root:cdrom /usr/bin/cdrecord /usr/bin/cdrdao
+ chmod 4750 /usr/bin/cdrecord /usr/bin/cdrdao
+ If you don't want all members of the 'cdrom' group to be able to execute the
+ two suid binaries, then create a special group (such as 'burning' which is
+ recommended by k3b), use it instead of 'cdrom' in the line above, and add
+ to it only the users you wish to have access to cdrecord and cdrdao.
+
+If you have compilation errors that look something like this:
+ /usr/include/asm-generic/fcntl.h:117: error: redefinition of 'struct flock'
+ /usr/include/bits/fcntl.h:142: error: previous definition of 'struct flock'
+ /usr/include/asm-generic/fcntl.h:140: error: redefinition of 'struct flock64'
+ /usr/include/bits/fcntl.h:157: error: previous definition of 'struct flock64'
+ See the following link for some pointers on fixing it:
+ http://www.mail-archive.com/blfs-dev@linuxfromscratch.org/msg08942.html
+
+Input methods for complex characters (CJK, which is shorthand for Chinese,
+ Japanese, Korean) and other non-latin character sets have been added. These
+ input methods use the SCIM (Smart Common Input Method) platform.
+ The environment variables for SCIM support are set in /etc/profile.d/scim.sh
+ The requirements for getting SCIM input methods to work in your X session
+ are as follows:
+ (1) Use a UTF-8 locale. Look in /etc/profile.d/lang.sh for setting your
+ language to (for instance) en_US.UTF-8. As a word of warning: maybe you
+ should leave root with a non-UTF-8 locale because you don't want root's
+ commands to be misinterpreted. You can add the following line to your
+ ~/.profile file to enable UTF-8 just for yourself:
+ export LANG=en_US.UTF-8
+ (2) Make the scim profile scripts executable. These will setup your
+ environment correctly for the use of scim with X applications. Run:
+ chmod +x /etc/profile.d/scim.*
+ (3) Start the scim daemon as soon as your X session starts. The scim daemon
+ must be active before any of your X applications. In KDE, you can add a
+ shell script to the ~/.kde/Autostart folder that runs the command
+ "scim -d". In XFCE you can add "scim -d" to the Autostarted Applications.
+ If you boot your computer in runlevel 4 (the graphical XDM/KDM login)
+ you can simply add the line "scim -d" to your ~/.xprofile file.
+ This gives you a Desktop Environment independent way of starting scim.
+ When scim is running, you will see a small keyboard icon in your system tray.
+ Right-click it to enter SCIM Setup. In 'Global Setup' select your keyboard
+ layout, and you are ready to start entering just about any language
+ characters you wish! Press the magical key combo <Control><Space>
+ in order to activate or deactivate SCIM input. The SCIM taskbar in the
+ desktop's corner allows you to select a language. As you type, SCIM will show
+ an overview of applicable character glyphs (if you are inputting complex
+ characters like Japanese).
+
+If you are using the pinentry-gtk2 interface (for entering passphrases with
+ gpg-agent), be aware that there is a bug in the way scim-bridge and the
+ pinentry-gtk2 interact. The result is that keyboard input does not register
+ with pinentry-gtk2. For the time being, either change the /usr/bin/pinentry
+ symlink to use the qt or curses frontend, or don't use scim.
+
+If you have an older machine (with a BIOS released prior to 2001) and it will
+ not power off on shutdown, try adding this to your kernel's lilo stanza:
+ append = "acpi=force"
+
+If you have a Dell Optiplex 760 (or perhaps some other machine that has the
+ newer ICH10 chipset), and it won't boot, try one of these:
+ 1. Update the BIOS image to at least A03
+ 2. Turn C-States control off in the BIOS
+ 3. Boot with "hpet=disabled"
+
+If your wireless and/or bluetooth radios are not turned on by default after
+ booting up, you might need to load the rfkill-input module. If that solves
+ the problem for you, edit /etc/rc.d/rc.modules.local or /etc/rc.d/rc.local
+ to load the module on boot, or create /etc/modprobe.d/rfkill.conf and put
+ the following line in it:
+ install rfkill /sbin/modprobe -i rfkill ; /sbin/modprobe -i rfkill-input
+
|